Veille CVE

Recherche « qt »

21 CVE

Critique 2 Élevée 8 Moyenne 10 Faible 0 Non évaluée 1 Exploitées (KEV) Tri : plus récentes « qt » ✕
  1. CVE-2026-98869 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: bpf: Infer zext_dst based on static register liveness analysis As reported in the thread [1], the verifier's 32-bit operations zero extension logic is broken. This logic is responsible for correct semantics of 32-bit operations on s390 architecture. According to BPF semantics, operation `w1 += 1` is supposed to zero extend the upper half of the register `r1`. On s390 the JIT relies on the verifier emitting explicit zero extension before such operations. The verifier attempts to minimize the amount of zero extensions inserted by tracking whether upper halves of the 64-bit registers are ever used. Previously such tracking worked as follows: - bpf_reg_state->subreg_def field was set by do_check_insn() for each operation defining lower but not the upper halves of the register. - Whenever an operation reading the whole register was verified, the verifier checked register's subreg_def and set bpf_insn_aux_data->zext_dst flag as true via a call to mark_insn_zext() function. - After the verification was complete, a special pass bpf_opt_subreg_zext_lo32_rnd_hi32() extended 32-bit operations with bpf_insn_aux_data->zext_dst set as true by adding explicit zero extension. Note that the logic above relies on bpf_reg_state->subreg_def, which is a property of a current verifier state. Before the commit [2] two additional steps happened: - The verifier tracked upper and lower register halves' liveness as flags REG_LIVE_READ{32,64} in bpf_reg_state->live. - The function propagate_liveness() called mark_insn_zext() in order to transfer the knowledge about which registers have their upper halves alive (and thus might require zero extension). The commit [2] removed the two steps described above, hence making possible a situation like below: - The register's upper half is set and is used on some verification path P1 and the register happens not to be marked as precise. - The checkpoint C is created while processing some instruction between register initialization and usage. - On some other verification path P2 the register's upper half is not initialized and that path ends hitting the checkpoint C. - In such a case the register's initialization on path P2 would lack zext_dst mark, making it possible for the program to inject an arbitrary value in the register's upper half. This commit replaces subreg_def based logic with computing zext_dst statically, as a part of the bpf_compute_live_registers() analysis: - The analysis now tracks usage of upper and lower halves of the registers separately. - If some instruction defines a 32-bit subregister, but not the whole register, *and* the upper half of the register is alive after that instruction, the instruction is marked as zext_dst. There is one notable drop in precision: whenever a BPF subprogram is called, all 64 bits of parameter registers are presumed to be used. The assumption is that such a drop in precision would not inflict a noticeable performance penalty. [1] https://lore.kernel.org/bpf/CAGKGUv=sOuqQtA1Ub-5JXfA4FPosJFYKAQE4B79cK+P1erxqtg@mail.gmail.com/ [2] commit 107e16979905 ("bpf: disable and remove registers chain based liveness")

  2. CVE-2026-105923 4.0 Moyenne

    Qt

    A malicious SVG can trigger an integer overflow which in turn triggers a null-pointer dereference in VectorImage QML Type.

  3. CVE-2026-70387 8.4 Élevée

    OnePlus OxygenOS

    Exposed dangerous method or function and Incorrect Authorization vulnerability in OnePlus OxygenOS on Android. The olc2 logging HAL exposes a binder method that fork()'s and calls execl("/vendor/bin/sh", "sh", "-c", cmd, NULL) with a caller-supplied command string. The only authorization check is getCallingUid() == 0. Because SELinux policy grants binder access to this HAL to a wide client attribute, any uid-0 process in any of those domains (including dumpstate, which is reachable from an unprivileged app via Vulnerability 1) obtains arbitrary command execution. The spawned shell lands in u:r:vendor_qti_init_shell:s0 SELinux context via a policy type_transition, a domain holding all Linux capabilities. This issue affects OxygenOS: from 16.1.0 before 16.1.10.500, from 16.0.0 before 16.0.5.1200, and from 15.0.0 before 15.0.0.2000.

  4. CVE-2026-101201 4.3 Moyenne

    qt

    A malformed header in the binary file fed to QBinaryJson::fromBinaryData() can cause undefined behaviour because of out-of-bounds read.

  5. CVE-2026-8168 7.1 Élevée

    qt

    Uncontrolled recursion in the SVG parser and renderer of the Qt SVG module (QtSvg) in Qt Group Qt allows attackers to cause a denial of service (application crash via stack exhaustion) via a crafted SVG file with deeply nested elements.

  6. CVE-2026-112146 7.4 Élevée

    D-Link E15 · D-Link M32 · D-Link R15 · D-Link R32

    A vulnerability was detected in D-Link E15, M32, R15 and R32. This issue affects some unknown processing of the file /etc/emDaemon/passwd of the component MQTT Broker. The manipulation results in hard-coded credentials. It is possible to launch the attack remotely. The exploit is now public and may be used.

  7. CVE-2026-111871 7.3 Élevée

    itsmeravitejak Online-Examination-System

    A weakness has been identified in itsmeravitejak Online-Examination-System up to e6208e630b14657999bbfe4c9912302d2a1e2449. The impacted element is an unknown function of the file qsdb/usersdb/brandb/topicsdb/subjectsdb.php. Executing a manipulation of the argument query/qtype/sortname/sortorder can lead to sql injection. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The project was informed of the problem early through an issue report but has not responded yet.

  8. CVE-2026-110757 9.8 Critique

    Text::CSV_XS versions before 1.65 for Perl allow record splitting by writing strings used as numbers without quotes in combine. combine and print do not check whether a field needs quotes when its value has Perl's integer or numeric flag set. Perl sets these flags on a string used in a numeric operation when it parses as a number, which allows leading and trailing whitespace. With binary set, as csv does by default, "12\n" passes a check such as $qty > 0 and is then written unquoted with its newline. A value validated as a number can end the record early and turn the fields after it into a separate row.

  9. CVE-2026-111616 4.9 Moyenne

    Oqtane Framework

    Oqtane Framework through 10.2.6 contains an authorization bypass vulnerability in SettingController that allows a site administrator to read another co-tenant site's private settings. Attackers with the Administrators role on one site can request another site's entityId through their own alias to retrieve stored SMTPPassword and SMTPClientSecret values.

  10. CVE-2026-46472 7.5 Élevée

    An issue was discovered in GStreamer gst-plugins-good before 1.28.2. While parsing an MP4 file, the isomp4 plugin's qtdemux_parse_chnl function may read past the end of a global array, potentially leading to information disclosure.

  11. CVE-2026-46471 5.5 Moyenne

    An issue was discovered in GStreamer gst-plugins-good before 1.28.2. While parsing an MP4 file, the isomp4 plugin's qtdemux_parse_uuid function may read past the end of a heap-allocated buffer, allowing an attacker to disclose heap memory contents.

  12. CVE-2026-102464 5.9 Moyenne

    Eclipse Foundation Eclipse Vert.x · Eclipse vert.x

    In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Eclipse Vert.x MQTT (vertx-mqtt) MqttClient stores every inbound QoS 2 PUBLISH message received from the broker in an internal map (qos2inbound) while awaiting the corresponding PUBREL packet to complete the QoS 2 handshake. This map has no size limit; the maxInflightQueue option is enforced only on the outbound publish path and does not constrain inbound message retention. A malicious or compromised MQTT broker can exploit this by sending QoS 2 PUBLISH messages with distinct packet identifiers and withholding the PUBREL responses. Each incomplete handshake causes the client to retain the full publish message (topic, payload, and metadata) indefinitely, leading to unbounded memory growth in the Vert.x process. This can degrade the MQTT-consuming application or cause out-of-memory termination. The impacted component is io.vertx:vertx-mqtt.

  13. CVE-2026-22896 6.2 Moyenne

    QNAP Systems Inc. Network & Virtual Switch

    A cross-site scripting (XSS) vulnerability has been reported to affect Network & Virtual Switch. If a remote attacker gains an administrator account, they can then exploit the vulnerability to inject malicious code. We have already fixed the vulnerability in the following version: Network & Virtual Switch in QTS 5.1.8.2823 build 20240712 and later Network & Virtual Switch in QTS 5.2.1.2930 build 20241025 and later Network & Virtual Switch in QuTS cloud c5.2.4.3041 build 20250211 and later Network & Virtual Switch in QuTS hero h5.1.8.2823 build 20240712 and later Network & Virtual Switch in QuTS hero h5.2.1.2929 build 20241025 and later

  14. CVE-2026-67418 5.3 Moyenne

    rabbitmq-server

    RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5, the MQTT 5 parser in deps/rabbitmq_mqtt/src/rabbit_mqtt_packet.erl accepts Request-Problem-Information on PUBLISH packets even though the property is valid only for CONNECT. An authenticated publisher with topic write permission can cause the broker to store and route that inapplicable property to a separately authenticated matching subscriber. When the subscriber path serializes the outbound PUBLISH, serialise_prop/2 has no matching clause, and the uncontained function_clause exception closes the victim MQTT or Web MQTT connection. The publisher connection and broker remain available, and queued replay, retained-message persistence, and broker-wide denial of service were not established. This issue is fixed in versions 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5.

  15. CVE-2026-94370 6.5 Moyenne

    Qt_for_MCUs

    A defect in the Qt for MCUs core string handling causes heap memory corruption. When an application passes text into Qt Quick Ultralite using the public Qul::String interface type, and that text is held in a std::string, the conversion to the internal string type copies the pointer without taking ownership of it. Two objects then release the same memory, producing a double free, an invalid free, or a use-after-free.

  16. CVE-2026-108965 7.3 Élevée

    SourceCodester Performance Indicator System

    A vulnerability was determined in SourceCodester Performance Indicator System 1.0. This vulnerability affects unknown code of the file /opils/staff/edit_quantity.php. Executing a manipulation of the argument pqty can lead to sql injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized.

  17. CVE-2026-41210 6.5 Moyenne

    moonlight-stream moonlight-qt

    Moonlight Qt is a GameStream client for Windows, macOS, Linux, and Steam Link. In version 6.1.0 and earlier, after a victim initiates a streaming session to a malicious host, the host can send a crafted H.264 SPS NAL when Moonlight selects a decoder path that does not advertise CAPABILITY_REFERENCE_FRAME_INVALIDATION_AVC. The SPS fixup path in app/streaming/video/ffmpeg.cpp parses the server-provided data with h264bitstream, where attacker-controlled seq_parameter_set_id is used to index the 32-entry sps_table without validation. A value of 32 or greater causes an out-of-bounds write and remote heap corruption in the Moonlight client. The demonstrated impact is a reliable client crash, while code execution is not established. This issue is fixed in version 6.2.0.

  18. CVE-2026-109377 4.3 Moyenne

    Frappe ERPNext

    ERPNext 9.0.0 through 16.50.0 contains a missing authorization vulnerability that allows authenticated users to view stock quantities via whitelisted batch methods. Attackers, including customer portal users, can call get_batch_qty, get_batches_by_oldest or get_pos_reserved_batch_qty to list every item batch with per-warehouse quantities.

  19. CVE-2026-108113 8.8 Élevée

    ILIAS-eLearning e.V. ILIAS

    ILIAS before 9.24, 10.12, and 11.5 contains an unrestricted file upload vulnerability in QTI question import image handling (ilQtiMatImageSecurity) that allows authenticated authors to write executable files. Attackers with question pool import rights can import a crafted archive writing a .htaccess and PHP file to the web-served image directory, achieving remote code execution as the web server user.

  20. CVE-2026-102565 7.2 Élevée

    bookingalgorithms BA Book Everything

    The BA Book Everything plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'booking_service_qty' parameter in all versions up to, and including, 1.8.28 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Successful exploitation requires that an administrator or other privileged user opens the injected order record in the plugin's wp-admin order management area, which is the plugin's ordinary order-review workflow.

  21. CVE-2019-7193 9.8 Critique Exploitée Rançongiciel

    QNAP NAS devices · Qnap qts

    This improper input validation vulnerability allows remote attackers to inject arbitrary code to the system. To fix the vulnerability, QNAP recommend updating QTS to their latest versions.