Recherche « cursor »

Apache Software Foundation Apache Pulsar

The Apache Pulsar broker admin REST API provides a truncate operation for persistent topics (DELETE /admin/v2/persistent/{tenant}/{namespace}/{topic}/truncate). Truncating a topic moves all subscription cursors of the topic to the end of the topic and deletes the topic's inactive ledgers. Truncating a non-partitioned topic, or a single partition addressed by its partition name, correctly requires the tenant admin role or the superuser role. When the operation is requested for the name of a partitioned topic, the broker does not apply this tenant admin check to the caller. Instead, it truncates each partition using the broker's own internal admin client, which authenticates with the broker's configured client credentials rather than the caller's identity. Each per-partition truncate request is still checked for the tenant admin role or the superuser role, but against the broker's internal identity instead of the caller. The partitions are therefore truncated only when the broker's configured client role is a superuser or an admin of the target tenant, which is the usual configuration when authorization is enabled. As a result, when that condition holds, an authenticated user who is not a tenant admin can truncate any partitioned topic on which the user has lookup permission. Caller authentication and lookup permission alone are not sufficient: if the broker's internal identity lacks tenant admin or superuser authorization for the target tenant, the per-partition requests are rejected. With the default authorization provider, lookup permission is granted by produce or consume permission on the topic or its namespace. A user with no permissions on the topic cannot trigger the issue. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be different. Truncating a partitioned topic this way moves the cursors of all subscriptions on every partition to the end of the topic, so any unacknowledged backlog is skipped and is no longer delivered to consumers. It also deletes eligible older ledgers of each partition regardless of the namespace's configured retention policy, so messages stored in those ledgers can be permanently lost. The ledger currently being written is not deleted by the truncate operation. The issue does not allow reading message contents or changing permissions or configuration, and it does not give access to topics on which the user has no lookup permission. This issue affects Apache Pulsar versions from 2.8.0 before 4.0.14 and from 4.1.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. Users who cannot upgrade immediately can reduce exposure by restricting network access to the broker's admin REST API (/admin/v2) to trusted administrative clients.

Eclipse Foundation GUIX

The GUIX binary resource (theme) loader sizes its arena and populates it in two separate passes that traverse the resource file with independent cursor arithmetic. Because `gx_page_header_data_size` is never validated against the glyph data a page actually contains, the two passes can read different page headers for the same font page, derive different glyph counts, and reserve less than the load pass writes. The excess is written past the end of the arena, with content taken verbatim from the file. The overflowed buffer is allocated by GUIX itself, through `_gx_system_memory_allocator`, rather than supplied by the caller. The public API `gx_binres_theme_load()` takes no size parameter, so no amount of caller diligence prevents this. Reproduces in the shipped default configuration; `GX_BINARY_RESOURCE_SUPPORT` is enabled by default.

Borewit music-metadata

music-metadata is a metadata parser for audio and video media files. In the public development revision introduced after 11.14.0, a development-branch regression in the MP4 stsd sample-description parser allows an attacker-controlled sample-entry size of zero to prevent the StsdAtom.get cursor from advancing while an attacker-controlled entry_count keeps the synchronous loop running. A crafted MP4-family input can block the Node.js event loop and grow the sample-description table until the process is terminated or exhausts memory. The vulnerable change was present on the public master branch but was not included in music-metadata 11.14.0 or any earlier npm release, and version 11.16.0 contains the fix. This issue is fixed in version 11.16.0.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/ttm: fix swapped-out resources never leaving their bulk_move range ttm_tt_swapout() returns the number of pages swapped out on success and a negative error code on failure; for a populated ttm it never returns zero. Commit b2ed01e7ad3d ("drm/ttm: Fix ttm_bo_swapout() infinite LRU walk on swapout failure") moved the bulk_move bookkeeping in ttm_bo_swapout_cb() under "if (!ret)", so the ttm_resource_del_bulk_move_unevictable() / ttm_resource_move_to_lru_tail() pair is now skipped on every successful swapout. The equivalent change for the shrinker in commit 1d59f36e95f7 ("drm/ttm: Fix ttm_bo_shrink() infinite LRU walk on backup failure") tests "lret > 0", which is what was intended here as well. Before b2ed01e7ad3d the resource was taken off the bulk_move before the swapout; since then a swapped-out resource stays inside its BO's bulk_move range (and on the manager LRU) although it is unevictable. When it is later freed or the BO leaves the bulk_move (ttm_resource_free(), ttm_bo_set_bulk_move() via amdgpu_vm_bo_del()), ttm_resource_del_bulk_move() skips it because of its !ttm_resource_unevictable() guard, so a range endpoint in pos->first / pos->last is left pointing at freed memory. The next ttm_lru_bulk_move_tail() or ttm_resource_add_bulk_move() on that cursor is a use-after-free, seen as the resv WARN in ttm_lru_bulk_move_add(), "list_del corruption" in ttm_resource_move_to_lru_tail() or a NULL dereference in ttm_resource_manager_next() -- minutes to hours after a hibernation, or at process exit / reboot following one. Samuel Ainsworth's analysis of drm/amd issue 5387 (see Link) identified the dangling cursor; the missing removal at swapout time is the reason it dangles. Testing the condition for success restores the removal. On an AMD Phoenix APU (ASUS UM3406GA, gfx1103) running suspend-then-hibernate on a 7.0.y stable kernel carrying the backport (Ubuntu 7.0.0-31) the bug crashed 5 of 18 hibernation cycles; a function profile of one hibernation showed 336 ttm_tt_swapout() calls and zero ttm_resource_del_bulk_move_unevictable() calls. With this change the removal happens for every swapped-out resource and 12 further cycles were clean.

Linux

In the Linux kernel, the following vulnerability has been resolved: afs: Clear stale peer app data after address list changes afs_fs_probe_fileserver() fetches the current endpoint state under server->fs_lock, but leaves old_alist as NULL. Consequently, afs_set_peer_appdata() treats every address list replacement as initial setup and only binds the new peers; it never unbinds peers removed from the old list. An address refresh can therefore proceed as follows. CPU 0 replaces server S's list and drops Pold without clearing Pold->app_data. The server destroyer then clears only S's current peers and lets S reach its RCU callback. After the callback frees S, CPU 1 handles a callback through an RxRPC connection that still pins Pold, reads Pold->app_data, and calls afs_use_server() on the freed object. KASAN reported: BUG: KASAN: slab-use-after-free in afs_find_server+0x3c/0xa0 Read of size 4 at addr ffff8881013e1af0 by task krxrpcio/7001/74 Call Trace: afs_find_server+0x3c/0xa0 afs_rx_new_call+0x15c/0x390 rxrpc_new_incoming_call+0x97c/0x1730 rxrpc_input_packet.constprop.0+0xd03/0xec0 rxrpc_io_thread+0x967/0x1640 Allocated by task 93: afs_lookup_server+0x1a7/0x14c0 afs_alloc_server_list+0x43f/0xb60 afs_create_volume+0x923/0x1490 afs_get_tree+0x1c6/0x10a0 Freed by task 0: kfree+0x131/0x3c0 rcu_core+0x50a/0x1850 Last potentially related work creation: __call_rcu_common.constprop.0+0x71/0xa10 afs_put_server+0x213/0x2b0 Preserve old->addresses for the peer app-data update so that removed peers are cleared before the endpoint state is replaced. Also advance both cursors when the old and new lists share a peer; activating the old/new comparison without this would otherwise loop forever on the shared entry.

Linux

In the Linux kernel, the following vulnerability has been resolved: xfs: fix the rtrmap and rtrefcount _maxlevels_ondisk functions The _maxlevels_ondisk functions are used to compute the size of in-memory btree cursors for each btree type. Unfortunately, LOLLM noticed that the rtrmap and rtrefcount versions of these functions forget to account for the inode root, which means that we could access beyond the end of the cursor given a sufficiently large btree. Fix this.

Linux

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uac: validate rate list length before storing UAC1 and UAC2 configfs rate-list attributes parse a comma-separated list of sampling rates and store each parsed value in fixed-size arrays. The arrays have UAC_MAX_RATES entries, but the store paths do not check that the input contains at most that many tokens before writing through opts->name##s[i++]. Writing more than ten rates therefore writes past the end of the p_srates[] or c_srates[] array in struct f_uac1_opts or struct f_uac2_opts. With CONFIG_UBSAN_BOUNDS enabled, writing an 11-entry rate list to the UAC1 p_srate attribute reports: UBSAN: array-index-out-of-bounds drivers/usb/gadget/function/f_uac1.c:1669:1 index 10 is out of range for type 'int [10]' __ubsan_handle_out_of_bounds.cold f_uac1_opts_p_srate_store configfs_write_iter vfs_write ksys_write do_syscall_64 The same reproducer against the UAC2 p_srate attribute reports: UBSAN: array-index-out-of-bounds drivers/usb/gadget/function/f_uac2.c:2087:1 index 10 is out of range for type 'int [10]' __ubsan_handle_out_of_bounds.cold f_uac2_opts_p_srate_store configfs_write_iter vfs_write ksys_write do_syscall_64 Reject additional tokens once UAC_MAX_RATES entries have been parsed. Also keep the original kstrdup() pointer for kfree(), because strsep() advances the parsing cursor. Freeing the advanced cursor leaks the original buffer on successful parses and can free an interior pointer on some error paths.

Linux

In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: validate MADT IOAPIC entry bounds The IOAPIC hotplug lookup parses both MADT and _MAT records directly. The MADT walk previously used a subtable's declared length to advance the cursor after only locating a generic header. The _MAT path likewise passed a generic header to the IOAPIC helper. Validate that a current record has a complete generic header, that its declared length is contained in the available record range, and that a typed IOAPIC record contains the full fixed IOAPIC body before reading its fields. Use the same relation for both MADT and _MAT provider paths.

square wire

Wire provides gRPC and protocol buffers for Android, Kotlin, Swift, and Java. Prior to 6.4.5 and 7.0.0-alpha04, Wire protobuf readers do not consistently validate attacker-controlled lengths against the current logical message boundary before advancing cursors, pointers, limits, slices, or allocations. In Kotlin, ProtoAdapter.decode(ByteArray) and ProtoAdapter.decode(ByteString) use ByteArrayProtoReader32.internalNextLengthDelimited(), where a positive oversized length can wrap pos + length to a negative limit and escape the existing negative-length check. Related ProtoReader, ReadBuffer.readVarint(), ReadBuffer.verifyAdditional(count:), packed-repeated, nested-message, and ProtoDecoder.decodeSizeDelimited(_:from:) paths can cross logical boundaries, perform pointer arithmetic, reserve capacity, or convert an unrepresentable size before proving the requested bytes exist. An attacker who supplies malformed protobuf bytes can cause unchecked exceptions, traps, out-of-bounds behavior, or excessive allocation, resulting in denial of service without known confidentiality, integrity, or code-execution impact. This issue is fixed in versions 6.4.5 and 7.0.0-alpha04.

Linux

In the Linux kernel, the following vulnerability has been resolved: nfsd: sample writeback error cursor before async COPY loop _nfsd_copy_file_range() samples dst->f_wb_err into "since" after the copy loop, then uses it to detect writeback errors via filemap_check_wb_err() once vfs_fsync_range() returns. Because the nfsd_file cache reuses a single struct file across requests targeting the same inode, a concurrent COMMIT or stable WRITE on dst advances dst->f_wb_err to the current mapping->wb_err via file_check_and_advance_wb_err() during its own vfs_fsync_range(). If that advancement lands between the writeback error appearing in mapping->wb_err and the COPY worker sampling "since", the worker captures the already-advanced cursor, errseq_check() sees cur == since and returns zero, and NFSD4_COPY_F_COMMITTED is set even though writeback failed. CB_OFFLOAD then encodes wr_stable_how = FILE_SYNC4, the client treats the copied data as durable, and the failure becomes silent data loss. Sample since once at the start of the function. The cursor then reflects state in effect before this COPY issues any writes, and filemap_check_wb_err() detects any error that occurs during the copy regardless of which thread first observes it. This matches the pattern used by nfsd_vfs_write() and nfsd4_clone_file_range().

Linux

In the Linux kernel, the following vulnerability has been resolved: libceph: validate OSD extent maps before cursor advance net/ceph/osd_client.c:osd_sparse_read() validates that the sparse-read data length matches the summed extent lengths, but it does not validate that each OSD-supplied extent is monotonic and lies inside the original request range. A malformed authenticated OSD reply can advertise a far-forward nonzero extent offset with a matching data length and make the client advance the message-data cursor beyond the request buffer. This reaches the BUG_ON(!*length) assertion in ceph_msg_data_next() from the client receive path. Impact: A malicious or compromised authenticated Ceph OSD peer can crash a kernel Ceph client via a malformed sparse-read reply. Reject sparse extent maps that overflow, move backwards, overlap, or extend outside the original sparse-read request before advancing the cursor. [ idryomov: perform sparse_extent_map_valid() check a bit earlier, in CEPH_SPARSE_READ_DATA_LEN instead of CEPH_SPARSE_READ_DATA_PRE state ]

Linux

In the Linux kernel, the following vulnerability has been resolved: dm array: validate array block headers on read array_block_check() validates blocknr and csum and nothing else, while node_check(), next to it, has bounded the structural fields since both were written. dm_array_cursor_next() takes its loop bound from the on-disk nr_entries and element_at() is unguarded pointer arithmetic, so a count larger than the block holds keeps the cursor in one block while the index grows past it and the read walks off the dm-bufio buffer -- dm_cache_load_mappings() drives it once per cache block at activation. Check the header against itself: reject a zero value_size, require max_entries to equal calc_max_entries() for that value_size and block size, and require nr_entries to fit. Equality rather than an upper bound, since a count below the real capacity trips BUG_ON() in fill_ablock() and trim_ablock(). Metadata dm-array writes satisfies all three.

squirrelchat smol-toml

smol-toml is a small, fast, and correct TOML parser and serializer. Prior to 1.7.1, parse() can enter an infinite loop when a value inside an array or inline table is followed by a comment with no trailing newline. In src/util.ts, skipUntil() calls indexOfNewline(), receives -1 at the end of input, and resets the cursor to the beginning of the string instead of leaving the structure scan. The parser then hangs indefinitely and can consume a service's processing capacity when an application parses attacker-controlled TOML. This issue is fixed in version 1.7.1.

OpenSearch · Amazon OpenSearch Service

Unrestricted deserialization of untrusted data in the cursor pagination component in the OpenSearch SQL plugin allows a remote authenticated user with basic read/search permissions to execute arbitrary code on the server by sending a crafted cursor parameter to the plugins/sql endpoint.

MongoDB BI Connector ODBC Driver

A user able to submit SQL through an application using the MongoDB Connector for BI ODBC driver can supply a positioned-cursor statement whose cursor name exceeds the size of an internal fixed-length buffer. Because the name length is not bounded before the driver builds its diagnostic message, memory adjacent to that buffer is overwritten with user-supplied content. This can terminate the hosting application process and may allow unintended code to run within it.

Linux

In the Linux kernel, the following vulnerability has been resolved: xfs: fix off-by-one in rtrefcount btree root level validation xfs_rtrefcountbt_compute_maxlevels() sets mp->m_rtrefc_maxlevels = min(d_maxlevels, r_maxlevels) + 1; where the trailing "+ 1" already accounts for the inode-root level, so the deepest valid on-disk root level is m_rtrefc_maxlevels - 1 and a cursor must satisfy bc_nlevels <= bc_maxlevels (= m_rtrefc_maxlevels). The two on-disk validation paths, xfs_rtrefcountbt_verify() and xfs_iformat_rtrefcount(), check the root level with ">" instead of ">=", so a crafted rtreflink (metadir + realtime + reflink) image whose /rtgroups/N.refcount inode has bb_level == m_rtrefc_maxlevels is accepted on mount. xfs_rtrefcountbt_init_cursor() then sets bc_nlevels = bb_level + 1, exceeding bc_maxlevels by one. Since the xfs_rtrefcountbt_cur slab object is sized for exactly bc_maxlevels entries, the first btree op on such a cursor indexes bc_levels[m_rtrefc_maxlevels] past the end of the object. This is reached by the first rtrefcount cursor built after mount, via log/CoW recovery (xfs_reflink_recover_cow() during xfs_mountfs()) or an FS_IOC_GETFSMAP over the realtime device. Reject a root level equal to m_rtrefc_maxlevels, matching the ">=" form already used by the sibling data-device refcount/rmap verifiers and the in-memory rtrmap verifier. BUG: KASAN: slab-out-of-bounds in xfs_btree_lookup (fs/xfs/libxfs/xfs_btree.c:2101) Write of size 2 at addr ffff888018391658 by task exploit/144 xfs_btree_lookup (fs/xfs/libxfs/xfs_btree.c:2101) xfs_btree_query_range (fs/xfs/libxfs/xfs_btree.c:5308) xfs_refcount_recover_cow_leftovers (fs/xfs/libxfs/xfs_refcount.c:2113) xfs_reflink_recover_cow (fs/xfs/xfs_reflink.c:1085) xlog_recover_finish (fs/xfs/xfs_log_recover.c:3551) xfs_mountfs (fs/xfs/xfs_mount.c:1158) xfs_fs_fill_super (fs/xfs/xfs_super.c:1940) get_tree_bdev_flags (fs/super.c:1634) vfs_get_tree (fs/super.c:1694) path_mount (fs/namespace.c:4161) __x64_sys_mount (fs/namespace.c:4367) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) The buggy address belongs to the cache xfs_rtrefcountbt_cur of size 216 The buggy address is located 8 bytes to the right of allocated 216-byte region [ffff888018391578, ffff888018391650) Kernel panic - not syncing: Fatal exception

Linux

In the Linux kernel, the following vulnerability has been resolved: fbdev: bitblit: bound-check glyph index in bit_cursor() bit_cursor() fetches the glyph under the cursor with c = scr_readw(vc_pos); src = vc_font.data + ((c & charmask) * w * height); where charmask is 0x1ff when vc_hi_font_mask is set. The screen buffer value comes directly from scr_readw() and may be larger than the current font's glyph count. Syzkaller triggers this via vcs_write(). The Call Trace shows vcs_write() in vc_screen.c writing an arbitrary 16-bit value with writev() to /dev/vcsa, which vcs_write_buf() in vc_screen.c stores via vcs_scr_writew() without checking charcount. The stored value is later read in bit_cursor() in bitblit.c. When the font is changed from a font with 512 glyphs to a font with 256 glyphs, the screen buffer can retain characters with the high bit set from the previous mode, which could also produce the same out-of-bounds access. BUG: KASAN: global-out-of-bounds in soft_cursor+0x378/0x6bc drivers/video/fbdev/core/softcursor.c:70 Read of size 16 at addr ffff800086c57970 Call Trace: soft_cursor+0x378/0x6bc drivers/video/fbdev/core/softcursor.c:70 bit_cursor+0xa90/0x1108 drivers/video/fbdev/core/bitblit.c:365 fbcon_cursor+0x344/0x498 drivers/video/fbdev/core/fbcon.c:1427 hide_cursor+0xdc/0x2d0 drivers/tty/vt/vt.c:883 update_region+0x100/0x18c drivers/tty/vt/vt.c:669 vcs_write+0x8ec/0xaf0 drivers/tty/vt/vc_screen.c:685 bit_putcs_aligned() and bit_putcs_unaligned() already clamp the glyph index to vc_font.charcount. Apply the same clamp in bit_cursor() after extracting the attribute and masking, before indexing fontdata. The fix completes the bounds checking started in commit 18c4ef4e765a ("fbdev: bitblit: bound-check glyph index in bit_putcs*"), which missed the cursor path. This change should be safe because the clamp reuses the existing contract from fbcon: charcount is maintained under console_lock in con_font_set() and fbcon_font_set(), and hi_font_mask is cleared when switching from 512 to 256 glyphs. When stale screen data with high bits remains after a font switch, or when vcs_write() stores an arbitrary value, clamping the index to 0 prevents the out-of-bounds read without changing cursor semantics — the same fallback bit_putcs uses.

Amazon Ion Java

Uncontrolled memory allocation in the binary Ion stream cursor in Amazon ion-java before 1.12.0 might allow remote actors to cause a denial of service via a crafted Ion binary document containing a declared-length field that causes excessive heap preallocation. To remediate this issue, users should upgrade to version 1.12.0.

Linux

In the Linux kernel, the following vulnerability has been resolved: configfs: fix lockless traversals of ->s_children Having the parent directory locked protects entries from removal by another thread, but it does *not* protect cursors from being moved around by lseek() - or freed, for that matter.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/xe/pt: prevent invalid cursor access for purged BOs During a page table walk for binding, xe_pt_stage_bind() explicitly skips initializing the xe_res_cursor for purged BOs, treating them similarly to NULL VMAs by only setting the cursor size. However, xe_pt_hugepte_possible() and xe_pt_scan_64K() did not check if the BO was purged before attempting to walk the cursor using xe_res_dma() and xe_res_next(). Because the cursor was left uninitialized for purged BOs, this falls through and triggers warnings like: WARNING: drivers/gpu/drm/xe/xe_res_cursor.h:274 at xe_res_next Fix this by explicitly checking if the BO is purged in both xe_pt_hugepte_possible() and xe_pt_scan_64K(), returning early just as we do for NULL VMAs, avoiding the invalid cursor accesses entirely. As a precaution, also zero-initialize the cursor in xe_pt_stage_bind() to ensure we don't pass garbage data into the page table walkers if we ever hit a similar edge case in the future. (cherry picked from commit 4c7b9c6ece32440e5a435a92076d049450cd2d2e)

Linux

In the Linux kernel, the following vulnerability has been resolved: tpm: Make the TPM character devices non-seekable The TPM character devices expose a sequential command/response interface, but their open handlers leave FMODE_PREAD and FMODE_PWRITE enabled. After a command leaves a response pending, pread(fd, buf, 16, 0x1400) passes 0x1400 as *off to tpm_common_read(). The transfer length is bounded by response_length, but the offset is used unchecked when forming data_buffer + *off. A sufficiently large offset therefore causes an out-of-bounds heap read through copy_to_user() and, if the copy succeeds, an out-of-bounds zero-write through the following memset(). Positional I/O does not provide coherent semantics for this interface. An arbitrary pread offset cannot represent how much of a response has been consumed sequentially. The write callback always stores a command at the start of data_buffer, while pwrite() does not update file->f_pos and can leave the sequential read cursor stale. Call nonseekable_open() from both open handlers. This removes FMODE_PREAD and FMODE_PWRITE, causing positional reads and writes to fail with -ESPIPE before reaching the TPM callbacks, and explicitly marks the files non-seekable. Normal read() and write() continue to use the existing sequential f_pos cursor, leaving the response state machine unchanged. Tested on Linux 6.12 with KASAN and a swtpm TPM2 device: - sequential partial reads returned the complete response - pread() and preadv() with offset 0x1400 returned -ESPIPE - pwrite() and pwritev() with offset zero returned -ESPIPE - the pending response remained intact after the rejected operations - a subsequent normal command/response cycle completed normally - no KASAN report was produced.

PostgreSQL · Postgresql postgresql

Type confusion in PostgreSQL "portal"/cursor lifecycle allows a user to execute arbitrary code as the operating system user running the database, via re-creation of a cursor or other portal with different types. Versions before PostgreSQL 18.6, 17.11, 16.15, 15.19, and 14.24 are affected.

ash-project ash · Ash-hq ash framework

Deserialization of Untrusted Data vulnerability in ash-project ash allows an unauthenticated attacker to inject a filter expression through a forged keyset pagination cursor, resulting in SQL injection or code execution depending on the data layer. Read actions with keyset pagination decode the client-supplied page[:after] or page[:before] cursor in decode_values/2 in lib/ash/page/keyset.ex using non_executable_binary_to_term/2 with [:safe]. That guard blocks new atoms, funs, and ports, but not a struct built from atoms already interned in a running Ash application, so a decoded %Ash.Query.Call{} expression survives and is spliced into the keyset filter as a comparison value in do_filters/4 and evaluated. Because the cursor bypasses the Ash.Expr macro, the runtime never applies the private?/public? gate that would otherwise reject it. On AshPostgres the injected fragment is inlined into the SQL query; on the ETS and Simple data layers it is evaluated in-process as an arbitrary function call. This issue affects ash: from 1.17.0 before 3.31.3.

cursor

Cursor is a code editor built for programming with AI. Prior to 3.0.0, Cursor IDE for macOS allows an agent running in Auto-Run Sandbox mode, when Docker Desktop and the Dev Containers CLI are installed, to launch a privileged container and mount Docker's virtiofs0, granting read and write access to the user's home directory and enabling host command execution with the user's privileges without an additional permission prompt. This issue is fixed in version 3.0.0.

cursor

Cursor is a code editor built for programming with AI. Prior to 3.1.2, Cursor IDE for macOS allows an agent running in Auto-Run Sandbox mode to replace a virtual environment's Python executable with a malicious wrapper that the Microsoft Python extension invokes outside the sandbox, allowing arbitrary host commands with the user's privileges, including modifying files outside the workspace and launching applications. This issue is fixed in version 3.1.2.

ruby json

Ruby JSON is a JSON implementation for Ruby. From 2.20.0 until 2.21.2, Ruby's JSON native C extension clears the consumed JSON::ResumableParser input buffer but leaves state.start, state.cursor, and state.end pointing into released storage. When partial_value reconstructs an incomplete object containing duplicate keys, the duplicate-key warning path calls cursor_position, which dereferences those stale pointers. This results in a heap-use-after-free and can terminate the Ruby process. An attacker who can supply JSON stream data to an application using JSON::ResumableParser may cause process termination when the application calls partial_value on incomplete attacker-controlled input containing duplicate object keys. This issue has been fixed in version 2.21.2.

Spring Tools for Eclipse · Spring Tools for VSCode / Cursor / Theia · Broadcom spring tools

Starting Spring Boot applications in the Spring Tools with the live information mode enabled makes the running application vulnerable against JMX-based remote code execution. Affected Spring Products and Versions: Spring Tools for Eclipse: 5.2.0 and earlier Spring Tools for VSCode / Cursor / Theia: 2.2.0 and earlier

GNOME GIMP · Red Hat Enterprise Linux 9 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7

A flaw was found in the file-icns plugin in GIMP. When applying a decompressed mask during ICNS image processing, the plugin reads from the mask data buffer without verifying if the cursor exceeds the allocated resource size. If a crafted file contains a truncated mask resource, the icns_decompress function continues reading past the bounds of the buffer. This out-of-bounds read vulnerability results in information disclosure of heap contents, where memory contents are leaked as alpha channel pixel values, or a crash leading to a denial of service if unmapped memory is accessed.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: fix disconnect UAF in client teardown usbio_disconnect() walks usbio->cli_list in reverse and uninitializes each auxiliary device. auxiliary_device_uninit() drops the device reference, and for an unbound child that can run usbio_auxdev_release() and free the containing struct usbio_client. list_for_each_entry_reverse() advances after the loop body by reading client->link.prev. If the current client is freed by auxiliary_device_uninit(), the iterator dereferences freed memory. Use list_for_each_entry_safe_reverse() so the previous client is cached before the body can drop the final reference. This preserves reverse teardown order while keeping the next iterator cursor independent of the current client's lifetime. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in usbio_disconnect+0x12e/0x150 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? usbio_disconnect+0x12e/0x150 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x188/0x320 ? usbio_disconnect+0x12e/0x150 kasan_report+0xe0/0x110 ? usbio_disconnect+0x12e/0x150 usbio_disconnect+0x12e/0x150 usb_unbind_interface+0xf3/0x400 really_probe+0x316/0x660 __driver_probe_device+0x106/0x240 driver_probe_device+0x4a/0x110 __device_attach_driver+0xf1/0x1a0 ? __pfx___device_attach_driver+0x10/0x10 bus_for_each_drv+0xf9/0x160 ? __pfx_bus_for_each_drv+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? trace_hardirqs_on+0x18/0x130 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __device_attach+0x133/0x2a0 ? __pfx___device_attach+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_raw_spin_unlock+0x9a/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 device_initial_probe+0x55/0x70 bus_probe_device+0x4a/0xd0 device_add+0x9b9/0xc10 ? __pfx_device_add+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x44/0x60 ? srso_alias_return_thunk+0x5/0xfbef5 ? lockdep_hardirqs_on_prepare+0xea/0x1a0 ? srso_alias_return_thunk+0x5/0xfbef5 ? usb_enable_lpm+0x3c/0x260 usb_set_configuration+0xb64/0xf20 usb_generic_driver_probe+0x5f/0x90 usb_probe_device+0x71/0x1b0 really_probe+0x46b/0x660 __driver_probe_device+0x106/0x240 driver_probe_device+0x4a/0x110 __device_attach_driver+0xf1/0x1a0 ? __pfx___device_attach_driver+0x10/0x10 bus_for_each_drv+0xf9/0x160 ? __pfx_bus_for_each_drv+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? trace_hardirqs_on+0x18/0x130 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __device_attach+0x133/0x2a0 ? __pfx___device_attach+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_raw_spin_unlock+0x9a/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 device_initial_probe+0x55/0x70 bus_probe_device+0x4a/0xd0 device_add+0x9b9/0xc10 ? __pfx_device_add+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? add_device_randomness+0xb7/0xf0 usb_new_device+0x492/0x870 hub_event+0x1b10/0x29c0 ? __pfx_hub_event+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0x187/0x300 ? process_one_work+0x475/0xb90 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 process_one_work+0x4d7/0xb90 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_hub_event+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: consume only present negotiated TTLM maps ieee80211_tid_to_link_map_size_ok() validates negotiated TTLM elements against the number of link-map entries indicated by link_map_presence. ieee80211_parse_neg_ttlm() must consume the same layout. The parser advanced its cursor for every TID, including TIDs whose presence bit is clear and therefore have no map bytes in the element. A sparse map can then make a later present TID read past the validated element. The bad bytes land in neg_ttlm->{up,down}link[tid] but are gated by valid_links before being applied to driver state, so a peer cannot turn the read into a policy change. Under KUnit + KASAN with an exact-sized element allocation the OOB read is reported as a slab-out-of-bounds; whether the same trigger fires under the production RX path depends on surrounding allocator state. Advance the cursor only when the current TID has a map present.

PowerDNS Recursor

RRSIGs with too few labels can lead to bypass of DNSSEC wildcard validation

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: drm/virtio: use uninterruptible resv lock for plane updates virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush() lock the framebuffer BO's dma_resv via virtio_gpu_array_lock_resv() and ignore its return value. The function can fail with -EINTR from dma_resv_lock_interruptible() (signal during lock wait) or with -ENOMEM from dma_resv_reserve_fences() (fence slot allocation), leaving the resv lock not held. The queue path then walks the object array and calls dma_resv_add_fence(), which requires the lock held; with lockdep enabled this trips dma_resv_assert_held(): WARNING: drivers/dma-buf/dma-resv.c:296 at dma_resv_add_fence+0x71e/0x840 Call Trace: virtio_gpu_array_add_fence virtio_gpu_queue_ctrl_sgs virtio_gpu_queue_fenced_ctrl_buffer virtio_gpu_cursor_plane_update drm_atomic_helper_commit_planes drm_atomic_helper_commit_tail commit_tail drm_atomic_helper_commit drm_atomic_commit drm_atomic_helper_update_plane __setplane_atomic drm_mode_cursor_universal drm_mode_cursor_common drm_mode_cursor_ioctl drm_ioctl __x64_sys_ioctl Beyond the WARN, mutating the dma_resv fence list without the lock races with concurrent readers/writers and can corrupt the list. Both call sites run inside the .atomic_update plane callback, which DRM atomic helpers do not allow to fail (by the time it runs, the commit has been signed off to userspace and there is no clean rollback path). Moving the lock acquisition to .prepare_fb was rejected because the broader lock scope deadlocks against other BO locking paths in the same atomic commit. Introduce virtio_gpu_lock_one_resv_uninterruptible() that uses dma_resv_lock() instead of dma_resv_lock_interruptible(). This eliminates the -EINTR failure mode -- the realistic syzbot trigger -- without extending the lock hold across the commit. The helper locks a single BO and rejects nents > 1 with -EINVAL; both fix sites lock exactly one BO. Use it from virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush(); check the return value to handle the remaining -ENOMEM case from dma_resv_reserve_fences() by freeing the objs and skipping the plane update for that frame. The framebuffer BOs touched here are not shared with other contexts and lock contention is expected to be brief, so the loss of signal-interruptibility is acceptable. Other callers of virtio_gpu_array_lock_resv() (the ioctl paths) continue to use the interruptible variant. The bug was reported by syzbot, triggered via fault injection (fail_nth) on the DRM_IOCTL_MODE_CURSOR path, which forces the -ENOMEM branch in dma_resv_reserve_fences().

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix possible crash on l2cap_ecred_conn_rsp If dcid is received for an already-assigned destination CID the spec requires that both channels to be discarded, but calling l2cap_chan_del may invalidate the tmp cursor created by list_for_each_entry_safe and in fact it is the wrong procedure as the chan->dcid may be assigned previously it really needs to be disconnected. Calling l2cap_chan_clone directly may still lead to l2cap_chan_del so instead schedule l2cap_chan_timeout with delay 0 to close the channel asynchronously.

Anysphere, Inc. Cursor · Anysphere cursor

Cursor for Windows version 3.2.16 contains a binary planting vulnerability that allows remote attackers to achieve arbitrary code execution by placing a malicious git.exe file in the repository root directory. When a developer clones and opens a crafted repository, Cursor automatically resolves and executes the workspace-resident git.exe during IDE startup and on a recurring timed cadence without any user interaction, running the malicious binary under the privileges of the current user.

CODECHILD XML::Bare

XML::Bare versions through 0.53 for Perl will hang in an infinite loop when parsing malformed attributes. The parserc_parse function never advances the attribute-parse state cursor on certain malformed attribute forms, looping forever. Nameless attributes such as "<a ='c'>" or unbalanced quotes "<a b='''''''c'>" can trigger this condition.

CODECHILD HTML::Bare

HTML::Bare versions through 0.04 for Perl will hang in an infinite loop when parsing malformed attributes. The parserc_parse function never advances the attribute-parse state cursor on certain malformed attribute forms, looping forever. Nameless attributes such as "<a ='c'>" or unbalanced quotes "<a b='''''''c'>" can trigger this condition. Note that the latest version available on CPAN is version 0.02. Newer versions are available on the git repository.

zephyrproject zephyr

The Zephyr ADIN2111/ADIN1110 10BASE-T1S/T1L Ethernet driver (drivers/ethernet/eth_adin2111.c) reassembles received Ethernet frames in OPEN Alliance (OA) SPI mode by copying device-supplied 64-byte data chunks into a fixed static buffer ctx->buf of size CONFIG_ETH_ADIN2111_BUFFER_SIZE (default 1524 bytes). In eth_adin2111_oa_data_read(), each valid chunk was memcpy'd into ctx->buf[ctx->scur] and the write cursor scur advanced, with no check that scur + len stayed within the buffer. The number of chunks (up to 255, from the BUFSTS RCA field) and the per-chunk length are taken entirely from the frame data received off the wire; the cursor is only reset on a start-of-frame chunk. An attacker on the single-pair Ethernet segment can therefore send a frame whose reassembled size exceeds the configured buffer, causing the driver's RX offload thread to write attacker-controlled frame bytes past the end of the static buffer into adjacent driver/kernel memory (up to roughly 14.8 KB in the worst case). This is a remotely/adjacently reachable out-of-bounds write (CWE-787) that can corrupt memory and cause denial of service or potentially code execution. The defect was introduced when OA SPI support was added (commit 0ca8b0756b1) and shipped in releases v3.7.0 through v4.4.0. The fix adds a bounds check that drops the oversized frame and resets the cursor before the copy.

cursor

Cursor is a code editor built for programming with AI. Prior to the Cloud Agent fix on 03/31/2026, browser-enabled Cursor Cloud Agent sessions allowed attacker-controlled web content to connect from inside the agent container to an unauthenticated local agent endpoint, enabling code execution within the affected Cloud Agent sandbox or session and access to files, repository contents, environment variables, credentials, and GitHub App access tokens available to that session. This issue was fixed on 03/31/2026 by requiring authentication for the relevant agent endpoint.

PETDANCE App::Ack

App::Ack versions through 3.10.0 for Perl print unsanitised terminal escape sequences from filenames in several output modes. When ack prints a filename whose basename contains terminal control bytes such as ANSI escape sequences, those bytes reach the terminal unchanged. Version 3.10.0 added a _safe_filename helper that sanitises the filenames printed by -f, -g, the colored match heading, and per-match lines, but the --show-types, -l/-L, and -c paths still emit the raw filename. A file whose name embeds cursor-movement or color escapes can overwrite or recolor earlier terminal output, or be passed unchanged to a downstream consumer.

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Fix phys BO pread/pwrite with offset sg_page() returns struct page pointer not (void *) so the scaling of pread/pwrite is wrong for phys BO and wrong parts of BO would be accessed if non-zero offset is used. Last impacted platform with overlay or cursor planes using phys mapping was Gen3/945G/Lakeport. (cherry picked from commit 3e49a2f85070b2fb672c1e0fdba281a4ea3aebe6)

Eclipse Foundation Eclipse Open VSX · Eclipse open vsx

In Open VSX Registry before 1.0.2, the /vscode/unpkg/ endpoint serves user-supplied HTML files with Content-Type: text/html and without a Content-Security-Policy or Content-Disposition: attachment response header. An unauthenticated attacker can register a publisher account, upload a VSIX containing a crafted HTML payload, and induce an authenticated user to visit the resulting URL. The browser renders the file inline in the open-vsx.org origin context, enabling session token exfiltration, persistent Personal Access Token (PAT) generation, and unauthorized publication of malicious extension versions. Because Open VSX extensions are distributed to VS Code, VSCodium, Cursor, Windsurf, and compatible editors, a compromised extension update constitutes a supply chain attack against all downstream users.

FFmpeg · Red Hat Enterprise Linux AI 3.0 for RHEL 9 · Red Hat Enterprise Linux AI 3.2 for RHEL 9 · Red Hat Enterprise Linux AI 3.3 for RHEL 9

FFmpeg's RASC video decoder (decode_dlta in libavcodec/rasc.c) performs 32-bit reads and writes at the row cursor before the NEXT_LINE row-boundary check and validates the DLTA region in pixel rather than byte units, so a DLTA run on a PAL8 frame can access several bytes past the row allocation. A crafted media stream using the RASC FourCC, decoded by libavcodec, triggers a bitstream-controlled out-of-bounds heap write and adjacent out-of-bounds read, leading to memory corruption.

PowerDNS Recursor

A malicious authoritative server can send a crafted zone via the ZoneToCache function that leads to cache poisoning.

CursorTouch Windows-MCP

Windows-MCP is an open-source project that integrates AI agents with Windows. In versions prior to 0.7.5, certain HTTP modes exposed the MCP control plane without authentication while enabling wildcard CORS (allow_origins=*, allow_methods=*, allow_headers=*). Because the same server also exposed a PowerShell tool that executes caller-controlled commands as the Windows user running Windows-MCP, attackers could reach the control plane from arbitrary origins or non-browser clients and achieve arbitrary PowerShell execution. This issue was fixed in version 0.7.5.

cursor

Cursor is a code editor built for programming with AI. In versions prior to 3.0.0, the Cursor Desktop could execute workspace-defined Claude hook commands from .claude/settings.local.json without dedicated user approval. A malicious workspace or agent-created file could configure hooks that run local commands in the user's context when an agent turn ends. This could allow sandbox escape, persistence across turns, local data access, or follow-on compromise. This issue has been fixed in version 3.0.0.

Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 7 Extended Lifecycle Support · Red Hat Enterprise Linux 8

A signed integer overflow vulnerability was found in GStreamer's VMnc decoder. A crafted VMnc stream with large cursor dimensions can overflow signed integer payload-size arithmetic, bypassing a length check and leading to out-of-bounds reads. A remote attacker could trick a user into opening a specially crafted VMnc file, potentially causing a crash or information disclosure.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 8

In the Linux kernel, the following vulnerability has been resolved: sctp: revalidate list cursor after sctp_sendmsg_to_asoc() in SCTP_SENDALL The SCTP_SENDALL path in sctp_sendmsg() iterates ep->asocs with list_for_each_entry_safe(), which caches the next entry in @tmp before the loop body runs. The body calls sctp_sendmsg_to_asoc(), which may drop the socket lock inside sctp_wait_for_sndbuf(). While the lock is dropped, another thread can SCTP_SOCKOPT_PEELOFF the association cached in @tmp, migrating it to a new endpoint via sctp_sock_migrate() (list_del_init() + list_add_tail() to newep->asocs), and optionally close the new socket which frees the association via kfree_rcu(). The cached @tmp can also be freed by a network ABORT for that association, processed in softirq while the lock is dropped. sctp_wait_for_sndbuf() revalidates @asoc (the current entry) on re-lock via the "sk != asoc->base.sk" and "asoc->base.dead" checks, but nothing revalidates @tmp. After a successful return, the iterator advances to the stale @tmp, yielding either a use-after-free (if the peeled socket was closed) or a list-walk onto the new endpoint's list head (type confusion of &newep->asocs as a struct sctp_association *). Both are reachable from CapEff=0; the type-confusion path gives controlled indirect call via the outqueue.sched->init_sid pointer. Fix by re-deriving @tmp from @asoc after sctp_sendmsg_to_asoc() returns. @asoc is known to still be on ep->asocs at that point: the only callers that list_del an association from ep->asocs are sctp_association_free() (which sets asoc->base.dead) and sctp_assoc_migrate() (which changes asoc->base.sk), and sctp_wait_for_sndbuf() checks both under the lock before any successful return; a tripped check propagates as err < 0 and the loop bails before the re-derive. The SCTP_ABORT path in sctp_sendmsg_check_sflags() returns 0 and the loop hits 'continue' before sctp_sendmsg_to_asoc() is ever called, so the @tmp cached by list_for_each_entry_safe() still covers the lock-held free that ba59fb027307 ("sctp: walk the list of asoc safely") was added for.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 8

In the Linux kernel, the following vulnerability has been resolved: fs/smb/client: fix out-of-bounds read in cifs_sanitize_prepath When cifs_sanitize_prepath is called with an empty string or a string containing only delimiters (e.g., "/"), the current logic attempts to check *(cursor2 - 1) before cursor2 has advanced. This results in an out-of-bounds read. This patch adds an early exit check after stripping prepended delimiters. If no path content remains, the function returns NULL. The bug was identified via manual audit and verified using a standalone test case compiled with AddressSanitizer, which triggered a SEGV on affected inputs.