Veille CVE

Recherche « cline »

13 CVE

  1. CVE-2026-79980 5.6 Moyenne

    zephyrproject zephyr

    The DHCPv4 client in subsys/net/lib/dhcpv4/dhcpv4.c maintained its transaction identifier (iface->config.dhcpv4.xid) as a counter rather than as a per-transaction random value. It was seeded once with sys_rand32_get() in dhcpv4_start_internal(), incremented by one in dhcpv4_send_discover() and dhcpv4_send_decline(), and never changed by dhcpv4_send_request() — so every RENEWING and REBINDING exchange reused, unchanged, the identifier that had already appeared on the wire in the broadcast DHCPDISCOVER at boot, and where the identifier did move it moved predictably by one. RFC 2131 4.1 requires a single identifier per transaction, chosen so that clients are unlikely to collide. This identifier is the client's only unpredictable reply-validation token. net_dhcpv4_input() accepts a BOOTP reply on op, a matching xid, and a matching chaddr (the interface MAC, which is public); the UDP callback is registered with a wildcard remote address and port, and no server-identifier or source-address check is applied. An attacker who learns one identifier — for example any host on the same segment that sees the broadcast DHCPDISCOVER, or a DHCP server or relay on a network the device previously joined — therefore retains a valid token for the device's whole uptime, and can predict the identifiers of later exchanges, without having to observe the unicast renew traffic or race the legitimate server. A forged reply that passes those checks has effect regardless of client state, because dhcpv4_parse_options() applies its side effects before the state machine gate in dhcpv4_handle_reply(): the router option calls net_if_ipv4_set_gw() and the DNS option calls dns_resolve_reconfigure(). A single accepted datagram can thus repoint the device's default gateway and resolvers at attacker-controlled addresses, redirecting its traffic; during RENEWING or REBINDING a forged DHCPACK re-binds the lease with attacker-chosen parameters and a forged DHCPNAK removes the address and restarts configuration. The fix draws a fresh sys_rand32_get() value at each point where a transaction begins — entering SELECTING, RENEWING and REBINDING, and at the INIT/INIT-REBOOT entry taken when an interface with a lease goes down — while REQUESTING and DECLINE keep the identifier of the exchange they belong to, as RFC 2131 requires. As a side effect the client also no longer discards a slow server's offer after retransmitting a discover, and the initial-discover backoff now draws its own randomness instead of deriving it from the identifier.

  2. CVE-2026-115477 7.1 Élevée

    The-40-Thieves obsidian-tc

    obsidian-tc is a governed, agent-ready Model Context Protocol server for Obsidian vaults. From 1.13.0 until 1.31.4, on a Streamable HTTP deployment with `auth.jwtSecret` configured and a 2026-07-28-era client declaring `elicitation.form` support, a dispatch-gated tool call offered an `inputRequired` confirmation could still complete after the human declined or cancelled, or the elicitation response was omitted or malformed, provided the client echoed the validly bound `requestState` on resubmission. The server trusted an authentic, call-bound state as proof of approval even though that state was minted before the `elicitation/create` leg was asked and proved only that the resubmission belonged to the same call. A client behaving incorrectly or under an attacker's control could therefore execute dispatch-gated destructive vault operations without the human's approval, while still requiring the caller's ordinary tool permissions. Only tools marked `destructive: true` or requiring a scope with a human-in-the-loop floor were reachable through this bypass. The sixteen handler-side conditionally gated tools, including `write_note` overwrite and `move_note`, did not read elicitation state on the modern wire and let neither approval nor decline through that path. Affected deployments using stdio or leaving `auth.jwtSecret` unset instead used the CLI `elicit_token` fallback and did not offer this `requestState` round trip. The fix does not prevent a malicious client from reporting a fabricated approval, because the server cannot verify that the client displayed the form or that a human saw it. This issue is fixed in version 1.31.4.

  3. CVE-2026-92298 4.8 Moyenne

    EspoCRM

    EspoCRM through 10.0.8 uses PHP's rand() function to generate tokens for lead-capture opt-in, event invitation, and campaign URLs instead of a cryptographically secure generator. Remote unauthenticated attackers can guess these roughly 31-bit tokens to confirm opt-ins, accept or decline event invitations on behalf of other contacts, and access event details.

  4. CVE-2026-80047 7.8 Élevée

    Hugging Face Transformers

    A vulnerability in Hugging Face Transformers (versions 4.57.0 to 5.16.1) allows remote Python files to be written to local disk without user consent when using GenerativePreTrainedModel.load_custom_generate(). The function fetches and caches a remote module file before performing the required trust_remote_code consent check, inverting the security model enforced by other code-loading paths (such as AutoConfig, AutoModel, and AutoTokenizer). As a result, attacker‑controlled Python code from custom_generate/generate.py is copied into the user’s ~/.cache/huggingface/modules directory even if the user declines the trust prompt. Although execution is correctly gated, the file write is not reversible and can persist across sessions. This can lead to persistent, unauthorized files on disk and stale cache collisions where cached attacker code may later be executed during trusted model loads. The issue stems from an unconditional file write in dynamic_module_utils.py prior to any trust verification.

  5. CVE-2026-76845 6.5 Moyenne

    cthackers adm-zip

    adm-zip 0.5.9 through 0.6.0 follows symbolic links at the extraction destination. Utils.sanitize in util/utils.js enforces containment by comparing only the string form of an archive entry name against the resolved extraction root, and Utils.writeFileTo opens the computed destination with fs.openSync(path, "w", 0o666), which resolves symbolic links and carries neither O_NOFOLLOW nor a pre-write fs.lstatSync check. When a path component at the destination already exists as a symbolic link pointing outside the extraction root, extractAllTo, extractAllToAsync and extractEntryTo write the entry contents through that link and then chmod its target, placing attacker-controlled content in a file outside the root without any traversal sequence appearing in the archive. Reaching the write requires overwrite to be enabled, because the preceding fs.existsSync check also resolves the link and otherwise declines. An attacker able to create a symbolic link inside a shared, reused or predictable extraction directory, such as a temporary directory or a continuous integration workspace, can overwrite any file the extracting process is permitted to write.

  6. CVE-2026-72692 7.5 Élevée

    OpenSignLabs opensignserver

    A missing authorization vulnerability in OpenSignLabs opensignserver through 2.37.0 allows an unauthenticated remote attacker to irreversibly decline any in-flight document and forge the decline attribution to an arbitrary user via the declinedoc Parse cloud function. The function writes IsDeclined, DeclineReason, and a caller-supplied DeclineBy pointer without verifying the caller's identity, enabling workflow termination and evidentiary record falsification against any accessible document.

  7. CVE-2026-9021 5.3 Moyenne

    matrixaddons Easy Invoice – Invoice Generator, PDF Quotes & Payments

    The Easy Invoice plugin for WordPress is vulnerable to Missing Authorization in versions up to, and including, 2.1.19. This is due to the plugin registering the easy_invoice_accept_quote and easy_invoice_decline_quote AJAX actions via wp_ajax_nopriv_ hooks and relying solely on a quote-scoped nonce that is rendered into the publicly accessible single quote template, combined with an ownership check that is gated behind an off-by-default Pro option (easy_invoice_pro_restrict_quote_to_client). This makes it possible for unauthenticated attackers to accept or decline arbitrary published quotes — and, depending on the configured accept action, automatically convert them into invoices (and even email them to the client) — by harvesting the per-quote nonce from the public quote page and submitting it to admin-ajax.

  8. CVE-2026-59723 8.8 Élevée

    cline · Cline cline

    Cline is an autonomous coding agent as an SDK, IDE extension, or CLI assistant. Prior to 3.0.30, the Cline Hub dashboard server launched by the cline dashboard command accepts WebSocket connections on the /browser endpoint without validating the Origin header, and when ROOM_SECRET is unset for local 127.0.0.1 binds, isAuthorizedBrowserRequest() allows attacker-controlled websites to send desktopCommand frames that read workspace state, mutate MCP and provider settings, and trigger command execution when a provider or model is configured. This issue is fixed in version 3.0.30.

  9. CVE-2026-11703 7.5 Élevée

    wolfSSL · Wolfssl wolfssl

    Missing SNI/ALPN binding on stateful (session-ID) resumption, which previously skipped the binding check performed for ticket-based resumption. A cached session could be resumed under a different SNI/ALPN than originally negotiated and, where client-authentication policy differs across virtual hosts, carry the cached peer-authentication state into a context it was not established for. Resumption now verifies the SNI/ALPN binding for all paths and declines (falling back to a full handshake) on mismatch.

  10. CVE-2026-54320 8.4 Élevée

    daytonaio daytona

    Daytona is a secure and elastic infrastructure runtime for AI-generated code execution and agent workflows. Prior to 0.184.0, organization invitations could be accepted (and declined) by a user whose email matched the invitation but had not been verified. Daytona authenticates users via OIDC and matches an invitation's target email against the email in the caller's token, but the invitation accept and decline paths did not require that email to be verified, unlike organization creation, which already enforced verification. On identity providers that allow self-service signup and issue a session before the email is verified, an actor could register an address matching a pending invitation, leave it unverified, and accept the invitation, joining the target organization with the role the invitation carried (up to Owner). This vulnerability is fixed in 0.184.0.

  11. CVE-2026-44211 9.6 Critique

    cline · Cline cline

    Cline is an autonomous coding agent as an SDK, IDE extension, or CLI assistant. In versions 2.13.0 and prior, there is a cross-origin WebSocket hijack vulnerability in Cline Kanban servers. At time of publication, there are no publicly available patches.

  12. CVE-2026-46027 7.5 Élevée

    Linux · Linux linux kernel

    In the Linux kernel, the following vulnerability has been resolved: net/smc: avoid early lgr access in smc_clc_wait_msg A CLC decline can be received while the handshake is still in an early stage, before the connection has been associated with a link group. The decline handling in smc_clc_wait_msg() updates link-group level sync state for first-contact declines, but that state only exists after link group setup has completed. Guard the link-group update accordingly and keep the per-socket peer diagnosis handling unchanged. This preserves the existing sync_err handling for established link-group contexts and avoids touching link-group state before it is available.

  13. CVE-2026-9468 6.3 Moyenne

    dazeb cline-mcp-memory-bank

    A security flaw has been discovered in dazeb cline-mcp-memory-bank up to 55c81b9cf6c16700983c84dc4cdea3cafa19a75f. The affected element is the function handleInitializeMemoryBank of the file src/index.ts. The manipulation of the argument projectPath results in path traversal. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The project was informed of the problem early through an issue report but has not responded yet.