Veille CVE

Recherche « Red Hat Openshift Container Storage 4 »

14 CVE

Critique 0 Élevée 8 Moyenne 5 Faible 1 Non évaluée 0 Exploitées (KEV) Tri : plus récentes « Red Hat Openshift Container Storage 4 » ✕
  1. CVE-2026-114236 3.3 Faible

    Red Hat Confidential Compute Attestation · Red Hat DPU kit for NVIDIA · Red Hat Exploit Intelligence · Red Hat Multicluster Engine for Kubernetes

    storage/pkg/archive.ApplyLayer and ApplyUncompressedLayer may, when processing corrupt or malicious inputs, leak a file descriptor; unbounded repeated calls can exhaust the process’ file descriptor limit

  2. CVE-2026-111555 6.0 Moyenne

    Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 7 · Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 9

    A flaw was found in luksmeta. Improper boundary validation of metadata slots allows an attacker capable of supplying or modifying a disk header to redirect wipe or load operations outside the intended metadata area. An attacker could exploit this vulnerability by providing a crafted header with valid checksums to overwrite or zero out encrypted payload data, resulting in persistent data loss and corrupted storage. Exploitation typically requires privileged access to modify raw block devices or the ability to induce an administrator to process an untrusted disk image.

  3. CVE-2026-102010 7.0 Élevée

    Red Hat Hardened Images · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7

    A flaw was found in GCC. When an application calls the erase_if function on a binary heap priority queue in libstdc++, the library reallocates storage but fails to update its internal entry pointer. An attacker capable of triggering this operation can exploit this use-after-free condition, leading to a Denial of Service (DoS) via an application crash or potential memory corruption.

  4. CVE-2026-79699 4.4 Moyenne

    Red Hat Ansible Automation Platform 2 · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 9

    A flaw was found in the containers/storage library. A crafted tar archive containing a malicious whiteout header (e.g. victim/.wh.) can cause the extraction destination directory to be replaced with an arbitrary file when processed by storage/pkg/archive.UnpackLayer, ApplyLayer, or ApplyUncompressedLayer.

  5. CVE-2026-77176 8.1 Élevée

    Red Hat OpenShift Container Platform 4

    A flaw was found in Kata Containers. In configurations utilizing genpolicy for Confidential Containers guest protection, a malicious host operator can exploit insufficient validation of CreateContainer mount and storage rules. This allows them to mount arbitrary container-rootfs paths over sensitive host locations or provision arbitrary content, potentially exposing confidential information or enabling the acceptance of attacker-controlled input.

  6. CVE-2026-58224 6.5 Moyenne

    Red Hat Ceph Storage 9.2 · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7

    A flaw was found in Samba's CTDB, the clustered database service used by Samba. Insufficient integrity validation of received CTDB protocol packets allows malformed packets containing invalid field lengths, improperly terminated strings, or inconsistent packet sizes to be processed without adequate bounds checking. A remote attacker with access to the CTDB private network may trigger a denial of service through process crashes or excessive memory consumption and, in limited cases, disclose adjacent memory contents.

  7. CVE-2026-19730 4.2 Moyenne

    Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 9 · Red Hat Ansible Automation Platform 2 · Red Hat Enterprise Linux 8

    The 'podman quadlet install --replace' command opens the existing destination file with O_CREATE|O_WRONLY but omits O_TRUNC. When the initial reflink copy attempt fails (common on non-reflink-capable filesystems including many RHEL default XFS configurations), the fallback in ReflinkOrCopy uses io.Copy which performs a non-truncating write. If the original Quadlet is larger than the new Quadlet, the file is not truncated and content from the original is preserved. The command completes with no warning. There is no risk of information leakage as the user already had access to the Quadlet in order to replace it, and in most cases, this would only lead to invalid Quadlet files. However, security-related options from the end of the old Quadlet could be included in the new Quadlet, and if the truncation resulted in a valid Quadlet file, this could result in undesirable behavior. For example, running podman quadlet install --replace to remove a single line from the end of a Quadlet - including security-sensitive content, like AddCapability - will fail, and the option will continue to be used. Further, with Volume Quadlets, this can include additional mounts which can cause content to be unintentionally exposed into containers. If, later, the image is updated then compromised content might be leaked to an attacker. The vulnerable code paths are in pkg/domain/infra/abi/quadlet.go (lines 338-360, O_CREATE|O_WRONLY without O_TRUNC) and vendor/go.podman.io/storage/pkg/fileutils/reflink_linux.go (lines 12-19, non-truncating io.Copy fallback).

  8. CVE-2026-41567 7.2 Élevée

    moby/v2/daemon · moby Docker Engine · docker/daemon · Red Hat Multicluster Global Hub 1.4.5

    Moby is an open source container framework. In versions prior to 29.5.1 and in moby/moby v2 prior to v2.0.0-beta.14, when a compressed archive is uploaded to a container via `PUT /containers/{id}/archive` or piped through `docker cp -`, the daemon resolves decompression binaries (such as `xz` or `unpigz`) from the container's filesystem rather than the host's due to incorrect ordering of operations. A malicious container image containing a trojanized decompression binary can achieve arbitrary code execution with full daemon privileges, including host root UID and unrestricted capabilities, when a user uploads a compressed (xz or gzip) archive into that container. This issue is fixed in Docker Engine 29.5.1 and moby/moby v2.0.0-beta.14. Workarounds include only running containers from trusted images, using authorization plugins to restrict access to the `PUT /containers/{id}/archive` endpoint, and avoiding piping compressed archives into containers created from untrusted images

  9. CVE-2026-43503 8.8 Élevée

    Linux · Red Hat NVIDIA for RHEL 10 · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support

    In the Linux kernel, the following vulnerability has been resolved: net: skbuff: propagate shared-frag marker through frag-transfer helpers Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when moving frags from source to destination. __pskb_copy_fclone() defers the rest of the shinfo metadata to skb_copy_header() after copying frag descriptors, but that helper only carries over gso_{size,segs, type} and never touches skb_shinfo()->flags; skb_shift() moves frag descriptors directly and leaves flags untouched. As a result, the destination skb keeps a reference to the same externally-owned or page-cache-backed pages while reporting skb_has_shared_frag() as false. The mismatch is harmful in any in-place writer that uses skb_has_shared_frag() to decide whether shared pages must be detoured through skb_cow_data(). ESP input is one such writer (esp4.c, esp6.c), and a single nft 'dup to <local>' rule -- or any other nf_dup_ipv4() / xt_TEE caller -- is enough to land a pskb_copy()'d skb in esp_input() with the marker stripped, letting an unprivileged user write into the page cache of a root-owned read-only file via authencesn-ESN stray writes. Set SKBFL_SHARED_FRAG on the destination whenever frag descriptors were actually moved from the source. skb_copy() and skb_copy_expand() share skb_copy_header() too but linearize all paged data into freshly allocated head storage and emerge with nr_frags == 0, so skb_has_shared_frag() returns false on its own; they need no change. The same omission exists in skb_gro_receive() and skb_gro_receive_list(). The former moves the incoming skb's frag descriptors into the accumulator's last sub-skb via two paths (a direct frag-move loop and the head_frag + memcpy path); the latter chains the incoming skb whole onto p's frag_list. Downstream skb_segment() reads only skb_shinfo(p)->flags, and skb_segment_list() reuses each sub-skb's shinfo as the nskb -- both p and lp must carry the marker. The same omission also exists in tcp_clone_payload(), which builds an MTU probe skb by moving frag descriptors from skbs on sk_write_queue into a freshly allocated nskb. The helper falls into the same family and warrants the same fix for consistency; no TCP TX-side in-place writer is currently known to reach a user page through this gap, but a future consumer depending on the marker would regress silently. The same omission exists in skb_segment(): the per-iteration flag merge takes only head_skb's flag, and the inner switch that rebinds frag_skb to list_skb on head_skb-frags exhaustion does not fold the new frag_skb's flag into nskb. Fold frag_skb's flag at both sites so segments drawing frags from frag_list members carry the marker.

  10. CVE-2026-44289 7.5 Élevée

    protobufjs protobuf.js · Red Hat Ansible Automation Platform 2.2 · Red Hat OpenShift AI 3.4 · Red Hat OpenShift Pipelines

    protobufjs compiles protobuf definitions into JavaScript (JS) functions. Prior to 7.5.6 and 8.0.2, protobufjs could recurse without a depth limit while decoding nested protobuf data. This affected both skipping unknown group fields and generated decoding of nested message fields. A crafted protobuf binary payload could cause the JavaScript call stack to be exhausted during decoding. This vulnerability is fixed in 7.5.6 and 8.0.2.

  11. CVE-2026-42997 7.7 Élevée

    OpenStack Ironic · Red Hat OpenShift Container Platform 4 · Red Hat OpenStack Platform 16.2 · Red Hat OpenStack Platform 17.1

    An issue was discovered in idrac in OpenStack Ironic before 35.0.1. During import, a user invoking molds can request authorization to be sent to a remote endpoint. The credential forwarded is a time-limited Keystone token (which provides access to all OpenStack services Ironic is authorized for); or basic credentials configured for molds storage. The fixed versions are 26.1.6, 29.0.5, 32.0.1, and 35.0.1.

  12. CVE-2026-41602 7.5 Élevée

    Apache Software Foundation Apache Thrift · Red Hat Multicluster Global Hub 1.3.4 · Red Hat Multicluster Global Hub 1.4.5 · Red Hat Multicluster Global Hub 1.6.5

    Integer Overflow or Wraparound vulnerability in Apache Thrift TFramedTransport Go language implementation This issue affects Apache Thrift: before 0.23.0. Users are recommended to upgrade to version 0.23.0, which fixes the issue.

  13. CVE-2025-48431 7.5 Élevée

    Apache Software Foundation Apache Thrift · Red Hat Cryostat 4 on RHEL 9 · Red Hat Advanced Cluster Management for Kubernetes 2.14 · Red Hat Advanced Cluster Management for Kubernetes 2.15

    Mismatched Memory Management Routines vulnerability in Apache Thrift c_glib language bindings. This issue affects Apache Thrift: before 0.23.0. Users are recommended to upgrade to version 0.23.0, which fixes the issue. Description: Specially crafted requests can crash an c_glib-based Thrift server with a clean but fatal "free(): invalid pointer" error message.

  14. CVE-2024-9355 6.5 Moyenne

    Red Hat Enterprise Linux 7 Extended Lifecycle Support · Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 8.6 Advanced Mission Critical Update Support · Red Hat Enterprise Linux 8.6 Extended Update Support Long-Life Add-On

    A vulnerability was found in Golang FIPS OpenSSL. This flaw allows a malicious user to randomly cause an uninitialized buffer length variable with a zeroed buffer to be returned in FIPS mode. It may also be possible to force a false positive match between non-equal hashes when comparing a trusted computed hmac sum to an untrusted input sum if an attacker can send a zeroed buffer in place of a pre-computed sum.  It is also possible to force a derived key to be all zeros instead of an unpredictable value.  This may have follow-on implications for the Go TLS stack.