Recherche « Nmap Project Nmap »

zephyrproject zephyr

The UpdateHub firmware-over-the-air client parses the CoAP probe response with Zephyr's JSON library in z_impl_updatehub_probe() (subsys/mgmt/updatehub/updatehub.c). The decoder treats every descriptor field as optional — json_obj_parse() returns a bitmask of the fields it actually decoded and never fails on a missing one — so a response that omits the "sha256sum" string leaves the corresponding const char * in the zero-initialised struct resp_probe_any_boards / struct resp_probe_some_boards at NULL. Both metadata branches then computed sha256size = strlen(...objects.sha256sum) + 1 before any validation, dereferencing that NULL pointer; the SHA256_HEX_DIGEST_SIZE test that follows operates on a value the bad read has already produced and cannot prevent it. The metadata is supplied entirely by the network peer: probe_cb() accepts the datagram, runs coap_packet_parse() and copies the payload with no token matching and no cryptographic check. With CONFIG_UPDATEHUB_DTLS unset — the default — start_coap_client() uses plain CoAP over UDP on port 5683 with no peer authentication and resolves the server via unauthenticated DNS, so an on-path attacker, a DNS spoofer, or an off-path attacker who wins the race with a forged source address can deliver the malformed metadata. A probe response as simple as "objects":[[{}],[{}]] suffices, and no user interaction is required because updatehub_autohandler() polls on CONFIG_UPDATEHUB_POLL_INTERVAL. When CONFIG_UPDATEHUB_DTLS=y the trigger narrows to a malicious or compromised update server. The primitive is a read at address zero, not a write, so the impact is availability only. On targets where the low address range is unmapped or protected — MMU-based architectures, builds with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_DWT/_MPU/_PMP, TrustZone non-secure images, and SoCs such as nRF54L whose 0x0–0x400 window is unmapped — the load faults and Zephyr's default fatal handler halts the system, giving a remotely re-triggerable denial of service on every poll. On classic Cortex-M targets where the vector table is readable at address zero the walk usually terminates immediately and the request is rejected by the length check, so the outcome is configuration- and SoC-dependent. There is no memory write, and the copied bytes are only compared against the locally computed image hash, so there is no information-disclosure channel. The fix adds an explicit sha256sum == NULL test that returns UPDATEHUB_METADATA_ERROR ahead of the strlen() in both metadata branches. Debug builds (CONFIG_UPDATEHUB_LOG_LEVEL=4) still format the same pointers with %s in a LOG_DBG() loop that runs before the new checks, so that variant remains in debug configurations only.

zephyrproject zephyr

gptp_mi_qualify_announce() in subsys/net/l2/ethernet/gptp/gptp_mi.c walks the Path Trace TLV of a received IEEE 802.1AS Announce message, comparing each clock identity against the local one. The loop bound was taken solely from the attacker-controlled wire field announce->steps_removed (accepted up to 254), never from announce->tlv.len, which is the field that states how many identities the TLV actually carries. Because path_sequence is the flexible member of the wire TLV (struct gptp_path_trace_tlv) and GPTP_ANNOUNCE() yields a raw pointer into the received packet buffer, the memcmp() inside the loop can address memory well past the end of the received frame. The stack's only length validation, GPTP_ANNOUNCE_CHECK_LEN(), requires the received gPTP payload to be exactly 68 + tlv.len bytes — so it does not constrain the loop, it guarantees the data is absent. An unauthenticated attacker on the same Ethernet segment can send a single Announce frame declaring tlv.len = 0 with steps_removed = 254; the frame passes the length check and reception path (net_gptp_recv() → gptp_handle_msg() → gptp_mi_qualify_announce()), which performs no authentication, and the loop then reads 255 entries of 8 bytes each — about 2 KB — beyond the end of the network buffer. The impact is an out-of-bounds read. The bytes read are only used as a memcmp() operand and are never returned to the attacker, so there is no meaningful information disclosure; the practical risk is that the overread crosses a network buffer pool boundary into unmapped or MPU-protected memory and faults the networking RX thread, causing a denial of service. Exposure is limited to builds that enable the opt-in, experimental CONFIG_NET_GPTP (TSN/AVB deployments) and to attackers with layer-2 adjacency, since gPTP frames are sent to a link-local multicast address and are not routed. The fix computes the true entry count as tlv.len / GPTP_CLOCK_ID_LEN and rejects the announce when steps_removed + 1 exceeds it, so the loop can no longer run past the data the packet-length check proved present.

zephyrproject zephyr

The Zephyr ext2 filesystem driver validates the on-disk block bitmap in ext2_init_fs() (subsys/fs/ext2/ext2_impl.c) by passing fs_blocks = s_blocks_count - s_first_data_block to ext2_bitmap_count_set(). That helper (subsys/fs/ext2/ext2_bitmap.c) treats its argument as a number of bits and reads one bitmap byte per eight bits, but the bitmap buffer (BGROUP_BLOCK_BITMAP) is a single fetched block of only fs->block_size bytes (capacity fs->block_size * 8 bits). s_blocks_count and s_first_data_block are taken verbatim from the superblock and were never bounded against this single-group capacity; ext2_verify_disk_superblock() checks the magic, revision, and block-size shift but not the block count. A crafted ext2 image with an oversized s_blocks_count (up to ~4 billion, against a maximum 4096-byte block / 32768-bit bitmap) makes ext2_bitmap_count_set() scan roughly 512 MB of memory past the bitmap block — a large out-of-bounds read of the static block slab and adjacent memory. The defect is reached during mount: ext2_init_fs() is invoked from ext2_mount() (subsys/fs/ext2/ext2_ops.c), the registered .mount operation. Any path that mounts an attacker-supplied ext2 image (removable media, a disk/flash partition, or a downloaded image) triggers it. The kernel-privileged parser operates on attacker-controlled data, so the bug is exploitable wherever untrusted ext2 media can be mounted. Impact is an out-of-bounds read only: the resulting bit count is compared internally and the mount is rejected, so no attacker-controlled bytes are returned (not a useful information leak). The ~512 MB over-read will almost certainly cross an unmapped or MPU-protected boundary and fault, crashing the system — a denial of service triggered by mounting a single malformed image. The fix rejects any image whose fs_blocks exceeds fs->block_size * 8 before the scan.

zephyrproject zephyr

The userspace syscall verifier z_vrfy_mbox_send() in drivers/mbox/mbox_handlers.c validated the nested msg->data/msg->size fields by reading them directly out of live userspace memory, and then forwarded the original, still-mutable userspace struct mbox_msg * pointer to z_impl_mbox_send() and the underlying driver. Between the access check and the driver's use of msg->data, the validated pointer could be replaced, leaving a time-of-check/time-of-use window. On a system built with CONFIG_USERSPACE, any unprivileged userspace thread may invoke the mbox_send() system call. A second thread sharing the caller's address space can race to overwrite msg->data with a supervisor (kernel) address after the verifier's bounds check has passed but before the driver dereferences it. The driver then reads from the attacker-chosen address in supervisor context (for example memcpy(&data32, msg->data, msg->size) in the NXP mailbox driver, whose bytes are subsequently emitted to the peer mailbox endpoint). The impact is a userspace-to-supervisor access-control bypass: disclosure of kernel memory contents (high confidentiality impact), or, for an invalid/unmapped target address, a faulting kernel read causing denial of service. The fix snapshots the entire struct mbox_msg into a kernel-stack copy with k_usermode_from_copy() and validates and forwards that immutable copy, closing the race.

zephyrproject zephyr

The Intel ALH digital-audio-interface driver function dai_alh_get_properties() in drivers/dai/intel/alh/alh.c used a caller-supplied int stream_id with no range validation. The value indexes the fixed-size static const uint8_t alh_handshake_map[64] array and scales a FIFO register address, so an out-of-range stream_id produces an out-of-bounds read of one byte at an attacker-chosen signed offset from the array. That byte is written into prop->dma_hs_id and the resulting struct dai_properties is copied back to the caller, leaking it. dai_get_properties_copy() is a Zephyr __syscall, and its verifier z_vrfy_dai_get_properties_copy() (drivers/dai/dai_handlers.c) validates only the device-object permission and the destination buffer, not stream_id. A user-mode thread that has been granted access to the ALH DAI device object can therefore call the syscall with an arbitrary stream_id, crossing the userspace/kernel sandbox boundary. The impact is a one-byte-per-call arbitrary-offset kernel information disclosure (and leakage of a computed kernel address via fifo_address); a stream_id that resolves to an unmapped page faults in kernel context, giving a local denial of service. Exploitation requires CONFIG_USERSPACE and device access, making this a local, moderate-severity issue. The fix rejects negative and too-large stream_id values up front and returns NULL, which the copy wrapper maps to -ENOENT.

Nmap Project Nmap

Nmap versions up to and including 7.99 contains a denial of service vulnerability that allows remote attackers to crash the application by sending a crafted packet containing a zero-length TCP option. The malformed packet forces the Packet:parse_options() function in nselib/packet.lua to allocate objects in an infinite loop, causing an out-of-memory condition that results in application crash.

Red Hat Ansible Automation Platform 2

A flaw was found in AWX. The websocket event consumer performs RBAC authorization checks only for event groups that are mapped in the consumer_access() function (job_events, workflow_events, ad_hoc_command_events). Three event groups - inventory_update_events, project_update_events, and system_job_events — are not mapped, causing the authorization check to be skipped. Any authenticated user can subscribe to these unmapped websocket event groups for any object ID and receive real-time stdout output from jobs belonging to organizations they have no access to. This is an incomplete remediation of CVE-2020-10698.

zephyrproject zephyr

Zephyr's DNS resolver detects mDNS (.local) queries in dns_resolve_name_internal() (subsys/net/lib/dns/resolve.c) with memcmp(strrchr(query, '.'), ".local", 7), which always reads a fixed 7 bytes from the suffix pointer. When the resolved hostname's final label is shorter than 7 bytes (e.g. names ending in .org, .com, .net, .io, or a trailing dot), the comparison reads 1-2 bytes past the string's NUL terminator. The hostname (query) is the caller-supplied name passed through the standard getaddrinfo()/dns_get_addr_info()/dns_resolve_name() path and is influenceable by operators or remote inputs (server names from configuration, parsed URLs, or app-facing interfaces). On a tightly-sized buffer with no slack (for example a userspace getaddrinfo call where the hostname is copied with k_usermode_string_alloc_copy to exactly strlen+1 bytes), the over-read crosses the allocation boundary; if that boundary is unmapped (guard page, memory-domain boundary under MPU, or an address sanitizer) the over-read faults, causing a denial of service. The over-read bytes are never returned, so there is no information disclosure. The flaw is compiled only when CONFIG_MDNS_RESOLVER is enabled, exists since v1.10.0, and is fixed by replacing the fixed-length memcmp with a NUL-safe strcmp(ptr, ".local").

zephyrproject zephyr

On Xtensa targets with CONFIG_USERSPACE and CONFIG_XTENSA_MMU, the page-table code (arch/xtensa/core/ptables.c) maintains a global list, xtensa_domain_list, of active memory domains using a list node embedded inside the caller-owned struct k_mem_domain. When a domain is destroyed via k_mem_domain_deinit() -> arch_mem_domain_deinit(), the page tables are torn down and domain->arch.ptables is set to NULL, but the domain's node was not removed from xtensa_domain_list. The freed/deinitialized domain therefore remained linked into the global list as a dangling pointer into caller-owned storage that may then be freed or reused. Any subsequent arch_mem_map()/arch_mem_unmap() operation (widely invoked by kernel memory-mapping and demand-paging code) traverses the stale node and dereferences domain->ptables: at minimum a NULL pointer dereference causing a fatal MMU exception (denial of service), and if the k_mem_domain storage has been freed or reused, a use-after-free in which a stale/controlled ptables value is dereferenced and written through during the page-table walk (l2_page_table_map writes l1_table[...] and l2_table[...], and xtensa_mmu_compute_domain_regs writes into the domain struct and the L1 table), yielding page-table memory corruption that can undermine userspace isolation. The vulnerable path is reachable only from privileged kernel/supervisor code (k_mem_domain_deinit is not a syscall), not directly from unprivileged user threads or remotely. Affected: Zephyr v4.4.0 (the Xtensa memory-domain de-initialization feature was introduced in commit 3032b58f52d and first shipped in v4.4.0); fixed on main by adding sys_slist_find_and_remove() in arch_mem_domain_deinit(). The Xtensa MPU path is unaffected.

RsyncProject rsync · Samba rsync

Rsync version 3.4.2 and prior contain a receiver-side out-of-bounds array read vulnerability in recv_files() in receiver.c that allows a malicious rsync server to crash the rsync client process. Attackers can exploit the vulnerability by setting CF_INC_RECURSE in compatibility flags and sending a specially crafted file list where the first sorted entry is not the leading dot directory, followed by a transfer record with ndx=0 and an iflag word without ITEM_TRANSFER, causing the receiver to read 8 bytes before the allocated pointer array and dereference an invalid pointer at an unmapped address, resulting in a deterministic SIGSEGV crash of the rsync client.