Veille CVE

Recherche « Kubevirt kubevirt »

12 CVE

Critique 2 Élevée 4 Moyenne 5 Faible 1 Non évaluée 0 Exploitées (KEV) Tri : plus récentes « Kubevirt kubevirt » ✕
  1. CVE-2026-102623 6.5 Moyenne

    Red Hat OpenShift Virtualization 4

    A flaw was found in KubeVirt. An authenticated user with permission to create Virtual Machine Instances (VMIs) can cause a Denial of Service (DoS) by submitting a virtual machine definition with an empty ephemeral volume. The virt-controller component fails to properly validate the volume configuration, leading to an unhandled exception and application crash during processing. Because the malformed definition persists in the cluster, the controller enters a continuous crash loop, disrupting virtual machine lifecycle operations across the entire environment.

  2. CVE-2026-71566 9.3 Critique

    openshift-metal3 fakefish

    FakeFish handles incoming credentials by passing them down to scripts. This works for real hardware because in the end it's up to the BMC to validate them. However, KubeVirt relies on a KUBECONFIG file mounted to the container and completely ignores the credentials. This allows any user of the cluster to control VMs of the user that created fakefish, power them on and off, and mount arbitrary CD images to them.

  3. CVE-2026-13622 8.8 Élevée

    Red Hat Container Native Virtualization 4.12 · Red Hat Container Native Virtualization 4.13 · Red Hat Container Native Virtualization 4.14 · Red Hat Container Native Virtualization 4.15

    A symlink following vulnerability was found in KubeVirt's virt-handler migration proxy. During live migration, virt-handler dials Unix sockets inside the target virt-launcher pod via /proc/<pid>/root/ paths using net.Dial() without symlink protection. These socket paths reside in qemu-owned directories writable by the virt-launcher user. An attacker with namespace edit and pods/exec permissions can replace a migration proxy socket with a symlink to the host CRI-O socket. Because virt-handler runs as root in the host mount namespace, absolute symlink targets resolve against the host filesystem, and the bidirectional io.Copy proxy relays attacker-controlled bytes to the container runtime, enabling full node compromise.

  4. CVE-2026-17527 7.7 Élevée

    Red Hat Container Native Virtualization 4.14 · Red Hat Container Native Virtualization 4.16 · Red Hat Container Native Virtualization 4.18 · Red Hat Container Native Virtualization 4.19

    In containerized-data-importer (CDI), the aggregated cdi.kubevirt.io:view ClusterRole, intended to provide read-only access to CDI resources, includes a rule granting create on the datavolumes/source subresource. CDI's DataVolume clone authorization accepts this permission as sufficient to authorize cloning the contents of any PVC the caller can name, without requiring write access to the source namespace. A user or service account bound to the view role, commonly granted cluster-wide via ClusterRoleBinding, who also has ordinary write access (edit/admin) to any single namespace, can use this to exfiltrate the contents of any PVC in the cluster into a namespace they control, bypassing namespace isolation and the read-only guarantee of the view role.

  5. CVE-2026-13434 4.9 Moyenne

    Red Hat OpenShift Virtualization 4 · Kubevirt kubevirt · Redhat openshift virtualization

    A flaw was found in KubeVirt's network annotation generator. When a tenant creates a VirtualMachineInstance with a Multus network configuration, the supplied networkName value is written verbatim into the launcher pod's v1.multus-cni.io/default-network annotation without format validation or sanitization. The only admission check rejects empty strings; no DNS-1123 format validation, JSON detection, or special character rejection is performed. When the ExternalNetResourceInjection Beta feature gate is enabled (off by default, cluster-admin only), the NAD lookup that would otherwise catch malformed names is skipped by design. A tenant with kubevirt.io:edit permissions can inject a JSON-formatted NetworkSelectionElement array specifying an arbitrary namespace, NAD name, static IP address, and MAC address. Multus on the node parses this JSON and attaches the launcher pod to the specified network attachment in any namespace, enabling cross-namespace network access and IP/MAC impersonation on network segments normally segregated from tenant workloads. The ExternalNetResourceInjection feature gate was introduced in KubeVirt v1.8.0 (first shipped in OpenShift Virtualization 4.21).

  6. CVE-2026-13322 3.8 Faible

    Red Hat OpenShift Virtualization 4 · Redhat openshift virtualization · Kubevirt kubevirt

    A flaw was found in KubeVirt's downward metrics virtio-serial server. The server reads guest requests using textproto.Reader.ReadLine(), which buffers input indefinitely until a newline character is received, with no length limit or read deadline. A user with access to a VM guest that has the downward metrics virtio-serial device configured can write a continuous byte stream to the device, causing unbounded memory allocation in the virt-handler process until it is OOM-killed.

  7. CVE-2026-13318 6.4 Moyenne

    Red Hat OpenShift Virtualization 4 · Kubevirt kubevirt · Redhat openshift virtualization

    A server-side request forgery (SSRF) flaw was found in KubeVirt's virt-api port-forward handler. When processing a port-forward request to a VirtualMachineInstance (VMI), virt-api reads the target IP from vmi.Status.Interfaces[0].IP and passes it directly to net.Dial() without validation. For VMIs using non-masquerade network bindings (bridge or secondary-only), this IP is reported by the QEMU guest agent running inside the VM and is fully controllable by the VM owner. An attacker with kubevirt.io:edit permissions can create a VM with a modified guest agent that reports an arbitrary IP address, then request port-forward to establish a bidirectional TCP tunnel from virt-api's cluster-internal network position to any routable destination, bypassing NetworkPolicy isolation.

  8. CVE-2026-13218 4.2 Moyenne

    Red Hat OpenShift Virtualization 4 · Kubevirt kubevirt · Redhat openshift virtualization

    A flaw was found in KubeVirt's virt-handler network cache handling. The WriteToCachedFile function writes data to a launcher-rooted path using os.WriteFile and os.Chown without symlink protection. A user with access to the virt-launcher container can plant a symlink at the cache file path, causing virt-handler to follow it and overwrite an arbitrary host file with JSON content and change its ownership.

  9. CVE-2026-13208 6.5 Moyenne

    Red Hat OpenShift Virtualization 4 · Kubevirt kubevirt · Redhat openshift virtualization

    A flaw was found in KubeVirt's virt-handler domain notify server. The gRPC handlers for HandleDomainEvent and HandleK8SEvent derive the VMI identity (namespace/name) solely from the request body without validating it against the connection's origin. Each virt-launcher pod connects through a per-VMI pipe socket, but no identity tag is propagated from the pipe path to the server handlers. This allows a compromised virt-launcher process to send forged domain lifecycle events for any other VMI scheduled on the same node, causing virt-handler to erroneously update that VMI's state and disrupt its lifecycle management.

  10. CVE-2026-13201 7.3 Élevée

    Red Hat Container Native Virtualization 4.12 · Red Hat Container Native Virtualization 4.13 · Red Hat Container Native Virtualization 4.14 · Red Hat Container Native Virtualization 4.15

    A flaw was found in KubeVirt's safepath package used by virt-handler. The OpenAtNoFollow function uses O_PATH|O_NOFOLLOW to obtain a file descriptor to a path leaf, but downstream operations resolve the path via /proc/self/fd/N using link-following syscalls. When the leaf is a symlink, the kernel dereferences it, defeating the intended no-follow protection. An attacker with access to a virt-launcher pod can exploit this to redirect virt-handler's IPC socket connections, including the notify socket used for VM domain lifecycle events. By hijacking this socket, the attacker can inject arbitrary domain events into virt-handler, causing it to take incorrect lifecycle actions, corrupt VM state in the Kubernetes API, or crash — resulting in sustained denial of VM management services for all virtual machines on the affected node. Additionally, the same symlink following flaw allows virt-handler to apply file ownership or permission changes to unintended host paths.

  11. CVE-2026-9804 7.7 Élevée

    Red Hat Container Native Virtualization 4.17 · Red Hat Container Native Virtualization 4.18 · Red Hat Container Native Virtualization 4.19 · Red Hat Container Native Virtualization 4.20

    A flaw was found in KubeVirt's virt-exportserver component. An attacker with specific namespace-level access can exploit a path traversal vulnerability in the VMExport directory endpoint. By placing a symbolic link (symlink) within an exported filesystem Persistent Volume Claim (PVC) that points outside its designated mount root, the attacker can read arbitrary files from the exporter pod's filesystem. This leads to information disclosure, potentially exposing sensitive data.

  12. CVE-2026-7374 9.9 Critique

    Red Hat Container Native Virtualization 4.12 · Red Hat Container Native Virtualization 4.13 · Red Hat Container Native Virtualization 4.14 · Red Hat Container Native Virtualization 4.15

    A flaw was found in KubeVirt's virt-handler component. This vulnerability allows an authenticated OpenShift user with edit permissions in a single namespace to exploit improper symlink validation when connecting to virtual machine console sockets. By replacing the console socket with a symlink to the host's container runtime (CRI-O) socket, an attacker can hijack virt-handler's privileged connection. This enables the attacker to access any Unix socket on the host, potentially leading to full control of the node and the entire cluster.