Recherche « Hex hex »

zephyrproject zephyr

The UpdateHub firmware-over-the-air client parses the CoAP probe response with Zephyr's JSON library in z_impl_updatehub_probe() (subsys/mgmt/updatehub/updatehub.c). The decoder treats every descriptor field as optional — json_obj_parse() returns a bitmask of the fields it actually decoded and never fails on a missing one — so a response that omits the "sha256sum" string leaves the corresponding const char * in the zero-initialised struct resp_probe_any_boards / struct resp_probe_some_boards at NULL. Both metadata branches then computed sha256size = strlen(...objects.sha256sum) + 1 before any validation, dereferencing that NULL pointer; the SHA256_HEX_DIGEST_SIZE test that follows operates on a value the bad read has already produced and cannot prevent it. The metadata is supplied entirely by the network peer: probe_cb() accepts the datagram, runs coap_packet_parse() and copies the payload with no token matching and no cryptographic check. With CONFIG_UPDATEHUB_DTLS unset — the default — start_coap_client() uses plain CoAP over UDP on port 5683 with no peer authentication and resolves the server via unauthenticated DNS, so an on-path attacker, a DNS spoofer, or an off-path attacker who wins the race with a forged source address can deliver the malformed metadata. A probe response as simple as "objects":[[{}],[{}]] suffices, and no user interaction is required because updatehub_autohandler() polls on CONFIG_UPDATEHUB_POLL_INTERVAL. When CONFIG_UPDATEHUB_DTLS=y the trigger narrows to a malicious or compromised update server. The primitive is a read at address zero, not a write, so the impact is availability only. On targets where the low address range is unmapped or protected — MMU-based architectures, builds with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_DWT/_MPU/_PMP, TrustZone non-secure images, and SoCs such as nRF54L whose 0x0–0x400 window is unmapped — the load faults and Zephyr's default fatal handler halts the system, giving a remotely re-triggerable denial of service on every poll. On classic Cortex-M targets where the vector table is readable at address zero the walk usually terminates immediately and the request is rejected by the length check, so the outcome is configuration- and SoC-dependent. There is no memory write, and the copied bytes are only compared against the locally computed image hash, so there is no information-disclosure channel. The fix adds an explicit sha256sum == NULL test that returns UPDATEHUB_METADATA_ERROR ahead of the strlen() in both metadata branches. Debug builds (CONFIG_UPDATEHUB_LOG_LEVEL=4) still format the same pointers with %s in a LOG_DBG() loop that runs before the new checks, so that variant remains in debug configurations only.

sgl-project sglang

SGLang through 0.5.22 contains a denial of service vulnerability that allows API clients to abort other users' in-flight generation requests by supplying a short client-controlled rid. Attackers can submit streaming /generate requests with single hex character rids and disconnect, triggering prefix-matching abort logic that terminates all other clients' requests.

codename065 Premium Packages – Sell Digital Products Securely

The Premium Packages – Sell Digital Products Securely plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'note' parameter in all versions up to, and including, 7.2.8 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The exploit bypasses tag-based filtering because the payload is stored as a hex-escaped sequence (e.g., \x3cimg onerror=...\x3e) that sanitize_textarea_field does not strip, and is only decoded back into a live HTML tag by stripcslashes() during admin rendering — after all sanitization has occurred.

adulau ssldump

The fanx_fingerprint function in ssl/sslxprint.c of ssldump allocates a heap buffer for formatting FAN/1 X.509 certificate fingerprints. The allocation size is computed as strlen(b64) + strlen(hex) + 31, but the format string "fan1:x509:server:passive:%s:sha256:%s" contains 33 fixed characters in addition to the two variable-length fields and a null terminator, requiring strlen(b64) + strlen(hex) + 34 bytes. This miscalculation results in a 3-byte heap-based buffer overflow on every invocation of the function with valid inputs. The overflow occurs because sprintf writes the full formatted string into the undersized heap buffer without bounds checking. An attacker who can supply a crafted pcap file containing a TLS X.509 certificate to a user running ssldump with FAN/1 fingerprinting enabled (for example with the -j -N options) can trigger the overflow. The resulting heap corruption may lead to denial of service through a crash or, in a worst-case scenario, arbitrary code execution in the context of the user running ssldump. The vulnerability is deterministic and requires no special privileges beyond the ability to provide input to the tool.

amartin755 libsmi

libsmi through 0.5.0 contains an out-of-bounds write vulnerability in smiValueAsString() in lib/smi.c that allows attackers to overflow a fixed 1024-byte static buffer through hex rendering of OCTET STRING values. Attackers can supply a crafted MIB with an OCTET STRING DEFVAL of 512 or more octets and a leading 0x00 byte to corrupt adjacent library globals and crash smidump or other consumers.

erlang rebar3 · hexpm hex_core · Erlang OTP · hexpm hex

Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Erlang OTP stdlib (erl_tar module), hexpm hex_core (hex_erl_tar module), hexpm hex (mix_hex_erl_tar module) and erlang rebar3 (r3_hex_erl_tar module) allows an attacker who supplies a tar archive to cause a denial of service via a crafted GNU sparse member. When erl_tar:extract/1,2 writes a member to disk, erl_tar:stream_to_file_loop/3 reads it in chunks of 65536 bytes by default. For a GNU sparse member whose sparse map ends before its real size, erl_tar:do_sparse_read/3 matches its trailing-hole clause before its zero-length clause. After the chunk is used up, the trailing-hole clause reads zero bytes, does not advance the position, and recurses forever. A 2048-byte archive keeps the extracting process and one scheduler busy until the process is killed. The {max_size, N} option prevents this only when N is below the real size of the member. Extraction with the memory option is not affected. hex_core ships its own copy of erl_tar as hex_erl_tar, and Hex and rebar3 ship hex_core with prefixed module names (mix_hex_erl_tar and r3_hex_erl_tar). These copies contain the same code and do not call stdlib's erl_tar, so they are affected on any OTP version. OTP 28 is not affected, but an application running on OTP 28 is affected if it extracts archives through an affected version of hex_core, Hex or rebar3. This issue affects OTP from OTP 29.0 before OTP 29.1.2, corresponding to rebar3 from 3.27.1 before 3.28.0, and stdlib from 8.0 before 8.1.1, and hex from 2.4.2 before 2.5.3; hex_core: from 0.14.0 before 0.20.1.

FreeRDP

FreeRDP 3.0.0-beta1 before 3.32.0 on Unix builds with PKCS#11 support has a stack-based buffer overflow in wprintKeyName() in WinPR's NCrypt PKCS#11 provider. It hex-encodes a key's CKA_ID, which can be up to 64 bytes, into a fixed 128-byte stack buffer. An attacker supplying a malicious PKCS#11 token or module whose key and matching certificate use a 55- to 64-byte CKA_ID can overflow the client's stack during key enumeration, causing a crash.

Gleam

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in gleam-lang gleam allows a malicious package publisher to delete a directory outside the project's build directory when a developer builds a project. A Hex package release's metadata carries an app field with the release's OTP application name. Gleam reads this field from the hex.pm release API when it downloads dependencies and uses it as the package's build directory name without validating it (hex_manifest_package in compiler-cli/src/dependencies.rs, ProjectPaths::build_directory_for_package). When a dependency fails to compile, Gleam deletes that directory with remove_dir_all. hex.pm didn't restrict the field to a directory name before 2026-10-12, so a publisher could set it to a value such as ../../../../target or an absolute path. When a project depends on such a release directly or transitively and the release fails to compile, gleam build, gleam check, gleam run, gleam test or gleam export deletes the directory the name resolves to. For a pure Gleam package no publisher code runs. This issue affects gleam: from 0.32.4 before 1.19.2.

hexpm hex

Improper Validation of Integrity Check Value vulnerability in hexpm hex allows a package mirror to substitute the tarball that mix hex.package fetch PACKAGE VERSION --output - writes to standard output. Hex compares a fetched tarball's inner and outer checksums with the repository's signed registry before writing it to a file or unpacking it. The standard output branch of mix hex.package fetch writes the bytes returned by Hex.SCM.fetch/3 without that comparison, and Hex.SCM.fetch/3 doesn't verify freshly downloaded tarballs itself. When a mirror configured with HEX_MIRROR_URL or mirror_url serves altered bytes, the command prints them and exits successfully, while the same fetch with --output FILE fails with a checksum mismatch. Hex also prints diagnostics to standard output while the command runs: the body of a failed HTTP response from the update check or a registry fetch, and API warnings from the x-hex-message header. A mirror that answers one of those requests with an error whose body is a tar archive gets that archive written to standard output ahead of the verified tarball, so a pipeline that unpacks standard output extracts the mirror's files. This happens even when the checksum check then fails, because the archive is already on standard output. This issue affects hex: from 0.20.2 before 2.5.2.

hexpm hex

Improper Certificate Validation vulnerability in hexpm hex allows an attacker who can intercept HTTPS connections, and holds a certificate for a Hex host issued by a CA in Hex's bundled CA store, to impersonate that host to users who set cacerts_path to a CA store that leaves that CA out. cacerts_path (HEX_CACERTS_PATH) is documented as the path to the CA certificate store, used instead of the CA bundle that ships with Hex. Hex.HTTP.SSL.ssl_opts/1 passes the configured store as the cacerts option, but builds the partial_chain callback from the bundled store whether cacerts_path is set or not. Hex.HTTP.SSL.partial_chain/2 accepts a server chain when any certificate in it has the same public key as a bundled CA certificate, so a chain that leads to a bundled CA passes verification although the configured store doesn't contain that CA. Hostname verification still applies. This issue affects hex: from 0.20.2 before 2.5.2.

hexpm hex_core

Improper Certificate Validation vulnerability in hexpm hex_core allows an attacker who can intercept HTTPS connections to impersonate hex.pm, repo.hex.pm or any other repository or API server to programs that use hex_core's default HTTP adapter on Erlang/OTP 24, or on OTP 25 when the operating system's CA certificates can't be loaded. hex_core:default_config/0 selects the built-in hex_http_httpc adapter. For an HTTPS request whose adapter config has no ssl option, hex_http_httpc:http_options/2 builds options that verify the server certificate against public_key:cacerts_get/0. When that call raises, the adapter prints a warning and sends the request without ssl options, so httpc uses the defaults of the ssl application, which before OTP 26 don't verify the server certificate. public_key:cacerts_get/0 doesn't exist on OTP 24, so every HTTPS request falls back there, and on OTP 25 it raises when no CA store is found. hex_core versions before 0.11.0 never set ssl options, so they don't verify the server certificate on OTP 25 and earlier whether or not a CA store is found. The fallback was intended and documented, but the documentation didn't make clear that it meant no certificate verification. Since hex_core 0.8.2 the README has warned that the built-in httpc adapter "has insecure default settings" and recommended other HTTP clients, and the adapter prints "using default ssl options which are insecure" on every request that falls back. hex_core 0.11.0 added certificate verification with the changelog entry "Use secure SSL defaults for OTP 25+". Neither the README nor the warning says that the server certificate isn't verified, the README doesn't say which OTP versions the warning applies to, and on OTP 25 without CA certificates the warning tells users to upgrade to OTP 25 or later, which they already run. This advisory is published so that users who took those notices as general advice know their HTTPS requests weren't authenticated. This issue affects hex_core: from 0.1.0 before 0.20.0.

gpriday SiteOrigin Widgets Bundle

The SiteOrigin Widgets Bundle plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 1.74.3 via the get_instance_css function. This makes it possible for authenticated attackers, with contributor-level access and above, to read the contents of arbitrary files on the server, which can contain sensitive information. The widget's normal update()/sanitize_field_input() pipeline — which would reject non-hex color values — is bypassed entirely because the [siteorigin_widget] shortcode handler calls $the_widget->widget() directly on the attacker-supplied decoded JSON instance.

sumatrapdfreader sumatrapdf

SumatraPDF is a multi-format reader for Windows. In 3.6.1 and earlier, FrameOnCommand() handles CmdExec by passing a null current-tab pointer to RunWithExe(), which dereferences WindowTab::filePath. A local process in the same interactive Windows session, at an integrity level greater than or equal to SumatraPDF's under Windows UIPI, can dispatch CmdExec over DDE or WM_COPYDATA while no document tab is open, causing abrupt process termination and loss of unsaved state. No broader impact is claimed beyond the advisory-supported conditions. No fixed version is available as of this review.

Aorimn dislocker

Dislocker through 0.7.3 contains an integer underflow vulnerability in get_vmk() and get_fvek() that allows attackers to trigger out-of-bounds heap reads via crafted datum sizes. Attackers can supply a malicious BitLocker volume image with a datum_size smaller than the 36-byte AES-CCM header, causing hexdump() to over-read and crash dislocker.

Nothings stb

A vulnerability was detected in Nothings stb up to 2c980bb59875b0d32144a71867fbdebb2f77cd20. The impacted element is the function hexwave_init in the library stb_hexwave.h. Performing a manipulation of the argument width/oversample results in integer overflow. Remote exploitation of the attack is possible. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet.

IBM PowerVM Hypervisor · Ibm power system s1122 \(9824-22a\) firmware · Ibm power system s1124 \(9824-42a\) firmware · Ibm power system s1122s \(9824-22b\) firmware

IBM PowerVM Hypervisor FW1120.00 through FW1120.01, FW1110.00 through FW1110.31, FW1060.00 through FW1060.81, and FW950.00 through FW950.H3 could allow a remote attacker to obtain sensitive information due to an out-of-bounds read.

IBM PowerVM Hypervisor · Ibm power system s1122 \(9824-22a\) firmware · Ibm power system s1124 \(9824-42a\) firmware · Ibm power system s1122s \(9824-22b\) firmware

IBM PowerVM Hypervisor FW1120.00 through FW1120.01, FW1110.00 through FW1110.31, FW1060.00 through FW1060.81, and FW950.00 through FW950.H3 is affected by a vulnerability in the partition firmware runtime. An attacker with root access to a partition can send a specially crafted request to the partition firmware runtime, causing it to crash with possible memory corruption.

IBM PowerVM Hypervisor · Ibm power system s1122 \(9824-22a\) firmware · Ibm power system s1124 \(9824-42a\) firmware · Ibm power system s1122s \(9824-22b\) firmware

IBM PowerVM Hypervisor FW1120.00 through FW1120.01, FW1110.00 through FW1110.31, FW1060.00 through FW1060.81, and FW950.00 through FW950.H3 is affected by a vulnerability in the partition firmware runtime boot configuration. An attacker with root access to a partition can maliciously alter partition nvram, causing the partition to fail to boot. This condition persists until operator intervention — deleting and recreating the partition configuration — to restore normal operation. Successful exploitation results in an integrity and availability impact.

IBM PowerVM Hypervisor · Ibm power system s1122 \(9824-22a\) firmware · Ibm power system s1124 \(9824-42a\) firmware · Ibm power system s1122s \(9824-22b\) firmware

IBM PowerVM Hypervisor FW1120.00 through FW1120.01, FW1110.00 through FW1110.31, FW1060.00 through FW1060.81, and FW950.00 through FW950.H3 is affected by a vulnerability in the RTAS firmware-to-OS interface. An attacker with administrator-level (root) access to a logical partition can send a specially crafted request to partition firmware, causing the partition to crash and become unavailable. Other partitions on the same managed system are not affected.

MISP

MISP contains a reflected cross-site scripting (XSS) vulnerability in the event REST search export confirmation form. The view template app/View/Events/ajax/eventRestSearchExportConfirmationForm.ctp renders a URL-supplied event ID list into a single-quoted JavaScript string literal using PHP's json_encode() without any hex-encoding flags. By default, json_encode() escapes double quotes and backslashes but does not escape single quotes. Because the JavaScript string is delimited by single quotes, an attacker can inject a single-quote character to terminate the string literal and execute arbitrary JavaScript in the victim's browser session. The vulnerability affects the Default and UiBeta themes, both of which render this view. The Overmind theme's own copy of the form already passed the value through an escaped data attribute and was not affected by this specific sink. Preconditions: the victim must be an authenticated MISP user and must actively open or navigate to the attacker-crafted URL. The attacker does not require an account or any prior access to the MISP instance. Security impact: successful exploitation allows execution of arbitrary JavaScript in the context of the MISP web application, potentially leading to session hijacking, unauthorized actions performed on behalf of the victim, exfiltration of sensitive data visible in the session, or further client-side attacks. The vulnerable component's own confidentiality, integrity, and availability are not directly compromised; the impact is on the underlying user session.

elixir-mint mint

Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling') vulnerability in elixir-mint mint allows a malicious HTTP/1 server to desynchronize a strict intermediary and the Mint client on a pooled connection, enabling response-queue poisoning against subsequent requests that share the connection. Mint.HTTP1.Parse.chunk_size/1 in lib/mint/http1/parse.ex stops at the first non-hexadecimal byte of a chunked response's chunk-size line and returns the remainder unexamined. Mint.HTTP1.decode_body/5 in lib/mint/http1.ex then discards every byte up to the CRLF with Parse.ignore_until_crlf/1, so the accepted grammar is a run of hex digits followed by arbitrary bytes, where RFC 9112 permits only a ;-introduced chunk extension. Lines such as 5ZZZZZ and 5 9 are accepted as chunk size 5, and 0ZZZZ is accepted as the terminating chunk that ends the message body. An RFC-strict intermediary rejects such a line while Mint accepts it, so the two disagree on chunk boundaries and on where the response ends. This issue affects mint: from 0.1.0 before 1.10.1.

creativeinteractivemedia Real3D Flipbook – 3D FlipBook, PDF FlipBook, PDF Viewer, PDF Embedder

The Real3D Flipbook Lite plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'lightboxtext' shortcode attribute (and other unsanitized attributes handled by on_shortcode()) in versions up to, and including, 5.1.1. This is due to insufficient input sanitization and output escaping in the on_shortcode() and print_global_options() functions: shortcode attribute values are copied verbatim into $this->flipbook_options and then emitted via wp_json_encode() inside a <script type="application/json"> block without the JSON_HEX_TAG flag, allowing a literal </script> byte sequence in the attribute value to break out of the JSON script context. Because WordPress's shortcode_parse_atts() applies stripcslashes() to attribute values, an attacker can encode the breakout tag as \x3c/script\x3e\x3cscript\x3e…\x3c/script\x3e, which survives the wp_kses_post save-time filter applied to Contributor content (the escape bytes are safe text characters, not HTML tags) and is decoded to real angle brackets at render time. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user (typically an Editor or Administrator previewing/moderating the pending post) accesses an injected page.

anycable

AnyCable is a realtime server for reliable two-way communication that supports any backend. Prior to 1.6.15, the telemetry subsystem in telemetry/config.go enables tracking with a hardcoded public authToken, while clusterFingerprint in telemetry/telemetry.go reads the full configuration file and raw os.Args returned by anycableCLIArgs, including values supplied through --secret, --jwt_secret, and --http_rpc_secret. These inputs are passed to generateDigest, where sha256.New produces the hexadecimal fingerprint that is sent as telemetry. The available source therefore does not show raw credentials leaving the process or establish the advisory's claimed confidentiality loss, although the stable fingerprint is derived from secret-bearing configuration and the default telemetry client uses publicly known authentication material. This issue is fixed in version 1.6.15.

ZenHive mpp

Improper Validation of Unsafe Equivalence in Input in ZenHive mpp allows an unauthenticated remote client to pass the Tempo duplicate-submission gate twice with one signed transaction. MPP.Methods.Tempo reserves the pre-broadcast dedup slot on the caller-supplied hex in reserve_hash_atomic/2, keyed through store_key/1 on tx.raw rather than on a canonical form of the transaction. The deserializer stores the caller's hex verbatim and accepts both recovery-id encodings, so one signed transaction submitted once with v=27 and once with v=0 yields two distinct reserve keys, and both pass the reserve and reach the broadcast path. The plug-level credential replay store is deliberately carved out for tempo in lib/mpp/replay.ex, leaving this reserve as the only gate, and the post-broadcast mark writes the canonical hash key that the raw-keyed reserve never reads. What the duplicate submission yields depends on the node: a nonce-reuse rejection fails closed, while a node that answers with the canonical hash for an already-known transaction returns a second valid Payment-Receipt for a single on-chain payment. This issue affects mpp: from 0.2.0 before 0.16.2.

http4s

Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, Ember’s chunk decoder trims the chunk-size token and accepts leading plus or minus signs instead of requiring one or more hexadecimal digits followed by the required CRLF. When an intermediary forwards chunked data without re-encoding and interprets malformed chunk boundaries differently, an unauthenticated attacker can create TE.TE request smuggling that bypasses intermediary controls, poisons caches, or hijacks the request queue. The same response-path leniency can enable response smuggling against an ember-client used as a gateway when the upstream is malicious or compromised. This issue is fixed in versions 0.23.35 and 1.0.0-M47.

ihor-sokoliuk mcp-searxng

mcp-searxng is a Model Context Protocol server that gives AI assistants web search and URL-reading capabilities through SearXNG. Prior to 1.2.0, the web_url_read URL policy in src/url-reader.ts can be bypassed while MCP_HTTP_HARDEN is enabled and MCP_HTTP_ALLOW_PRIVATE_URLS is not enabled because redirect targets are not revalidated, 0.0.0.0 is not classified as an internal address, and IPv4-mapped IPv6 literals canonicalized to hexadecimal form are not recognized. These inputs allow an attacker-influenced tool call to make the MCP server fetch loopback or internal HTTP resources and return content from local services, private APIs, service-mesh endpoints, or cloud metadata endpoints. The separate hostname-to-private-address case addressed by the earlier partial fix is not part of these residual bypasses. This issue is fixed in version 1.2.0.

WangYihang GitHacker

GitHacker is a tool that restores Git repositories from exposed .git directories. In 1.1.7 and earlier, add_head_file_tasks parses an attacker-controlled ref path from .git/HEAD and joins unvalidated path segments onto temp_dst/.git/logs/, allowing a malicious server to make GitHacker read an arbitrary local file when a victim runs the tool against the server's URL. add_hashes_parsed then scans the file for 40-character hexadecimal substrings and requests each match through .git/objects using the first two characters and remaining characters as path components, creating an attacker-observable existence oracle and disclosing matching hexadecimal fragments. Complete file contents are not returned, and the add_folder and add_task write path in shipped version 1.1.7 does not permit an escape. This issue is fixed in repository version 1.1.9.

tesseract-ocr tesseract · Tesseract-ocr tesseract ocr

Tesseract is an open source OCR engine. In version 5.5.3 and earlier, Plumbing::DeSerialize in src/lstm/plumbing.cpp rejects excessively large network stacks but accepts a zero-length stack for NT_SERIES, NT_PARALLEL, or NT_REVERSED layers in a crafted .traineddata model. During LSTMRecognizer initialization in src/lstm/lstmrecognizer.cpp, CacheXScaleFactor(XScaleFactor()) reaches Series::CacheXScaleFactor in src/lstm/series.cpp, which dereferences stack_[0] on the empty vector and invokes a virtual method through an invalid Network pointer. This causes a deterministic crash and denial of service at model load. No fixed release is available as of this review.

joedolson My Calendar – Accessible Event Manager

The My Calendar – Accessible Event Manager plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'fallback' Shortcode Attribute in all versions up to, and including, 3.8.3 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The bypass relies on hex-encoded shortcode attribute payloads (e.g. \x3cscript\x3e), which wp_kses_post cannot strip on save because they appear as literal backslash sequences rather than real HTML tags; WordPress core's shortcode_parse_atts() then calls stripcslashes() at render time, decoding the escapes into real angle brackets before they reach the unescaped sink.

elixir-mint mint

Inefficient Algorithmic Complexity vulnerability in elixir-mint mint allows a remote HTTP server to exhaust CPU on the client host and cause a denial of service. parse_hex_prefix/2 in lib/mint/http1/parse.ex folds each hex digit of a chunked response's chunk-size field into an arbitrary-precision accumulator with acc * 16 + digit and imposes no limit on the digit count. Because the accumulator grows without bound, the multiplication is not constant time and one pass over N digits costs O(N squared). handle_data/2 prepends conn.buffer and re-parses from the start on every socket message, so a server that dribbles the digits out in small packets makes the client pay that cost repeatedly. A run of roughly 512,000 hex digits costs over ten seconds of CPU in a single pass, measured on stock defaults. The parser reaches this state after a valid status line and a complete, valid header section, so an intermediary inspecting only headers sees an ordinary 200 response. This issue affects mint: from 1.9.3 before 1.10.0.

Spring Security · Vmware spring security

Spring Security's InetAddressMatchers utility provides matchInternal() and matchExternal() builders for constructing an InetAddressMatcher that classifies a given IP address as belonging to an internal (private) or external (public) network. Spring Security 7.1.0

Apache Software Foundation Apache Camel · Apache camel

Relative path traversal vulnerability in Apache Camel Azure-Storage Datalake component This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-azure-storage-datalake component can download an Azure Data Lake Storage Gen2 file to the local filesystem through its downloadToFile operation, writing into the directory named by the fileDir endpoint option. DataLakeFileOperations.downloadToFile built the local target by joining fileDir with the remote path name exactly as the Azure SDK reported it (new File(fileDir, fileClientWrapper.getFileName())) and passed the result straight to the SDK download call, with no lexical normalization and no check that the resolved location stayed inside fileDir. The remote name is not route-controlled data: the consumer enumerates the filesystem in DataLakeConsumer.createBatchExchangesFromPath, which lists paths and creates one exchange per entry from PathItem.getName() verbatim, applying no name filtering by default. A path name containing parent-directory segments therefore resolved to a location outside the configured fileDir, letting anyone able to influence the names present in the consumed Data Lake filesystem cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. The fileDir option is an ordinary common-group configuration parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. Camel's other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp and camel-azure-files - already constrained their local downloads to the configured directory using a path-segment boundary check; the camel-azure-storage-datalake download path was not covered by that work. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, constrain the names the consumer will act on using the regex endpoint option, which is applied to each listed path name as a full-string match, so that only simple single-segment names are accepted and any name carrying a path separator or a parent-directory segment is filtered out before an exchange is created. Alternatively, avoid the downloadToFile operation on untrusted filesystems and write the payload from the route under a file name the route itself controls, rather than one taken from the remote listing. As defence in depth, treat the object names in any externally writable Data Lake filesystem as untrusted input and do not derive local filesystem paths from them.

infracost

Infracost provides cloud cost intelligence for engineers, AI coding agents, and CI/CD. Prior to 0.10.45, the readFile, pathExists, isDir, and matchPaths template functions in internal/config/template/parser.go use a lexical filepath.Rel check and a leaf-only os.Lstat check that do not resolve an intermediate directory symlink. A repository can contain a path such as evil/file where evil points outside the checkout, causing os.ReadFile and related operations to follow the symlink and read runner-accessible files. The resulting content is rendered into generated configuration and can be surfaced through the Infracost dashboard or pull request comment, with greater impact in workflows that provide repository secrets. This issue is fixed in version 0.10.45.

IBM PowerVM Hypervisor · Ibm power system s1122 \(9824-22a\) firmware · Ibm power system s1124 \(9824-42a\) firmware · Ibm power system s1122s \(9824-22b\) firmware

IBM PowerVM Hypervisor FW1110.00 through FW1110.20, FW1060.00 through FW1060.71, and FW950.00 through FW950.H2 could allow a local attacker with administrative privileges to decrypt encrypted data due to certain hypervisor calls utilizing less entropy than requested.

IBM PowerVM Hypervisor · Ibm power system s1122 \(9824-22a\) firmware · Ibm power system s1124 \(9824-42a\) firmware · Ibm power system s1122s \(9824-22b\) firmware

IBM PowerVM Hypervisor Platform KeyStore (PKS) and virtual TPM FW1110.00 through FW1110.20, FW1060.00 through FW1060.71, and FW950.00 through FW950.H2 use persistent storage key seeds that result in an AES key with reduced strength. An attacker with access to the service processor or HMC could exploit this weakness to derive the encryption key and access the data.

IBM PowerVM Hypervisor · Ibm power system s1122 \(9824-22a\) firmware · Ibm power system s1124 \(9824-42a\) firmware · Ibm power system s1122s \(9824-22b\) firmware

IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the PowerVM hypervisor call interface. An attacker with root access to a guest partition can issue a specially crafted hypervisor call causing a virtual processor to become permanently unresponsive, requiring a full platform re-IPL to restore normal operation. In some cases this may also cause the guest to inject a small amount of data into hypervisor or partition memory with no attacker control over the target location. Successful exploitation results in an integrity and availability impact to the managed system.

IBM PowerVM Hypervisor · Ibm power system s1122 \(9824-22a\) firmware · Ibm power system s1124 \(9824-42a\) firmware · Ibm power system s1122s \(9824-22b\) firmware

IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker with access to the same network as a partition undergoing iSCSI SAN network boot can prevent that partition from completing its boot sequence. Other partitions and the managed system are not affected. Only partitions actively performing an iSCSI SAN network boot are affected, resulting in an availability impact.

IBM Power Systems Firmware · Ibm power system s1122 \(9824-22a\) firmware · Ibm power system s1124 \(9824-42a\) firmware · Ibm power system s1122s \(9824-22b\) firmware

Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, and FW1060.00 through FW1060.80 is affected by a vulnerability in the host firmware. An attacker with service access to the service processor can supply a carefully crafted command that could leak the contents of hardware registers that should be inaccessible to the service processor. Successful exploitation could result in limited confidentiality or availability impacts to the affected host system.

IBM Server Firmware · Ibm power system s922 \(9009-22g\) firmware · Ibm power system h922 \(9223-22s\) firmware · Ibm power system s914 \(9009-41g\) firmware

IBM Server Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the FSP firmware update process. An attacker with authenticated administrator-level access to the FSP can, under specific conditions, execute arbitrary code, resulting in a confidentiality, integrity, and availability impact.

IBM Power Systems Firmware · Ibm power system e1080 \(9080-hex\) firmware · Ibm power system e1180 \(9080-heu\) firmware · Ibm power system s922 \(9009-22g\) firmware

IBM Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in access controls over privileged system configuration operations on the FSP. An attacker with authenticated administrator-level access to the FSP can place the managed system into a non-production operational mode, allowing certain system components to be disabled. This condition persists across FSP resets and requires explicit operator intervention — clearing the affected configuration — to restore normal operation. Successful exploitation results in an availability impact to the managed system.

maalfer Pentestify

Incorrect Behavior Order: Validate Before Canonicalize in the report theme CSS sanitizer in maalfer Pentestify 1.2.0 through 2.3.2 allows an authenticated user to force outbound HTTP requests from other users' browsers, disclosing their IP address and User-Agent, via CSS hex escapes that reconstruct the url() function and evade the sanitizer blocklist

IBM PowerVM Hypervisor · Ibm power system s1122 \(9824-22a\) firmware · Ibm power system s1124 \(9824-42a\) firmware · Ibm power system s1122s \(9824-22b\) firmware

IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, and FW1060.00 through FW1060.80 IBM PowerVM could allow a local attacker to obtain sensitive information or cause a denial of service due to improper control of format strings.

hashcat

hashcat master branch builds after v7.1.2 contain a heap buffer overflow vulnerability in the KeePass AESKDF/KDBX v4 module (module 34301) that allows attackers to corrupt adjacent heap memory by supplying an oversized ninth hash field token. The module accepts up to 600 hex characters for the ninth token field but decodes it into a fixed 256-byte buffer with no length check, allowing a maximal input to write up to 44 bytes past the buffer boundary into adjacent esalt fields and heap chunk metadata, potentially enabling heap corruption or memory access violations.

open-reception appointment-booking-software

OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. The new-client booking flow in versions 1.0.1 and prior consists of three calls: `bootstrap-challenge` (returns a 16-bit PoW challenge with `difficulty=4` leading hex zeroes), `bootstrap-verify` (validates the PoW and issues a Bearer booking access token), and `create-new-client` (consumes the token and creates the tunnel and first appointment). The token correctly binds to `tenantId`, `tunnelId`, `clientPublicKey`, and `emailHash`, but never to `channelId`. The `bootstrap-challenge` request schema does not even accept a `channelId`, and the issued token's payload contains no channel information. Independently, the service function `createNewClientWithAppointment` checks only `channel.archived = false`. The `channel.isPublic` check that protects `addAppointmentToTunnel` is missing in the new-client path. The combination means: an attacker completes the bootstrap flow normally (16-bit PoW, completes in well under one second on commodity hardware, no rate limiting beyond the throttle store), receives a valid booking access token, and then submits the `create-new-client` payload with `channelId` pointing to a private (`isPublic = false`) channel. The booking lands as `CONFIRMED` if the target channel has `requiresConfirmation = false` (the default), otherwise as `NEW`. The patient-facing UI does not list private channels in its picker (`/api/public/channels` correctly filters `isPublic = true`), so the channel ID must be obtained out of band. The companion finding V-10 (schedule endpoint discloses private channels) provides exactly that: a single unauthenticated GET reveals every private channel ID for any tenant. V-10 plus V-11 together make private channels fully reachable to anonymous attackers. As of time of publication, no known patched versions are available.

djangoproject Django

An issue was discovered in Django 6.0 before 6.0.9 and 5.2 before 5.2.18. GeoDjango's `django.contrib.gis.geos.GEOSGeometry` is subject to a potential denial-of-service when parsing deeply nested `GEOMETRYCOLLECTION` objects supplied as well-known text (WKT), well-known binary (WKB), or hex-encoded WKB, which triggers unbounded recursion and a segmentation fault in the underlying GEOS library. Spatial field lookups and the `django.contrib.gis.forms.GeometryField` form field are also affected. Earlier, unsupported Django series (such as 5.1.x, 5.0.x, and 4.2.x) were not evaluated and may also be affected. Django would like to thank Andrew MacPherson and kimchunbok_ for reporting this issue.

guzzle

Guzzle is an extensible PHP HTTP client. Prior to 7.15.2 and 8.0.1, SetCookie::matchesDomain() gives every subdomain of a cookie Domain that cookie unless SetCookie::matchesDomain() recognizes the Domain as an IP literal or a numeric host, and the decision comes from the domain's own text, so two spellings a transport reads as an address keep subdomain scope. Hexadecimal and mixed-base forms such as 0x7f000001 and 0177.0.0.0x1 go unrecognized while libcurl 8.21.0 reads both as 127.0.0.1. A percent-escaped Domain keeps that scope on both branches because percent-decoding sits above numeric parsing, so 192.168.0.%31 and 127.0.0.1%2e are registered names in the URI grammar rather than address literals, and no numeric rule in any base classifies them, while libcurl decodes the host before resolving and reads them as 192.168.0.1 and 127.0.0.1. A cookie stored for Domain=0x7f000001 is placed in the Cookie header of a request to evil.0x7f000001, disclosing a session identifier or token to a host that is not that address, and a response from evil.0x7f000001 setting Domain=0x7f000001 is accepted into the jar and replayed to the address, so a server answering for the look-alike name can fix a session or set application state. Exploitation requires the application to enable cookie support, address an origin by one of these spellings, and contact a host whose name ends in that spelling. This issue is fixed in versions 7.15.2 and 8.0.1.

IBM PowerVM Hypervisor · Ibm power system s1122 \(9824-22a\) firmware · Ibm power system s1124 \(9824-42a\) firmware · Ibm power system s1122s \(9824-22b\) firmware

IBM PowerVM Hypervisor FW1110.00 through FW1110.20, and FW1060.00 through FW1060.71 could allow an attacker with physical access to the Transparent Memory Encryption (TME) hardware to decrypt encrypted memory due to insufficient cryptographic entropy.

sdelements lets-chat

Let's Chat 0.4.0 through 0.4.8 contains a null dereference vulnerability that allows authenticated attackers to crash the server by supplying a valid 24-character hex string room parameter that matches no document in the database. Attackers can send a crafted GET /messages request causing an uncaught TypeError in an asynchronous Mongoose callback that terminates the Node.js server process, with the same defect reachable through multiple code paths including the socket.io interface.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: crypto: caam - use print_hex_dump_devel to guard key hex dumps Use print_hex_dump_devel() for dumping sensitive key material in *_setkey() and gen_split_key() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG is enabled.

elixir-mint mint

Inconsistent interpretation of HTTP requests (HTTP response smuggling) vulnerability in elixir-mint mint allows a malicious HTTP/1 server to desynchronize a strict intermediary and the Mint client on the same pooled connection, enabling response-queue poisoning against subsequent requests that share the connection. The Mint.HTTP1.decode_body/5 function in lib/mint/http1.ex parses the chunk-size line of a Transfer-Encoding: chunked response with Integer.parse(data, 16). RFC 7230 defines chunk-size = 1*HEXDIG and forbids any sign prefix, but Integer.parse/2 accepts an optional leading + or -. A chunk-size line of +5 is accepted as a five-byte chunk; lines of +0 and -0 are accepted as the terminating zero-length chunk and end the message body early. An RFC-strict intermediary in the response path rejects these forms, so the intermediary and the Mint client disagree on where one response ends and the next begins. On a pooled keep-alive connection, an attacker-influenced origin can inject bytes that the client attributes to the next legitimate response on the same connection, poisoning the response queue and corrupting the responses returned to unrelated in-flight requests. This issue affects mint: from 0.1.0 before 1.9.3.

dani-garcia vaultwarden

Vaultwarden is a Bitwarden-compatible server written in Rust. Prior to 1.36.0, Vaultwarden's /icons/{domain}/icon.png endpoint used src/http_client.rs checks including should_block_address() and post_resolve() that missed decimal, hexadecimal, and octal IP representations, allowing SSRF through the icon-fetching HTTP client for blind internal network or port discovery. This issue is fixed in version 1.36.0.

gohugoio hugo · Gohugo hugo

Hugo is a static site generator. From v0.162.0 through v0.163.0, the default security.http.urls policy denies requests to loopback, internal, and cloud-metadata IPv4 literals, but the deny rule only matched dotted-decimal notation, so alternate IPv4 encodings of the same addresses, including integer, hex, or octal, passed the policy. When a template passes an untrusted or data-derived URL to resources.GetRemote and the host platform uses the cgo system resolver, these encodings resolve to the blocked address, allowing build-time server-side requests to loopback and internal services, including the cloud-metadata endpoint in hosted or CI builds; the same check is reused on redirects, so the gap also applies to each redirect hop. This issue is fixed in v0.163.1.

radareorg radare2 · Radare radare2

A vulnerability was identified in radareorg radare2 up to 6.1.6. This vulnerability affects the function cmd_anal_opcode of the file libr/core/cmd_anal.inc.c of the component hexpairs Parser. Such manipulation leads to integer overflow. The attack needs to be performed locally. The exploit is publicly available and might be used. The name of the patch is 84e773986e7e5bb30453a9384f498ec0ccc9d0a9. A patch should be applied to remediate this issue.

themegrill Zakra

The Zakra theme for WordPress is vulnerable to Stored Cross-Site Scripting via post meta values in all versions up to, and including, 4.2.0. This is due to the theme registering three post meta fields (zakra_menu_item_color, zakra_menu_item_hover_color, and zakra_menu_item_active_color) with 'show_in_rest' => true and 'auth_callback' => '__return_true', but without any sanitize_callback parameter in the register_post_meta() calls. While the classic editor save path applies sanitize_hex_color() sanitization, the REST API path completely bypasses this protection. The unsanitized meta values are then retrieved via get_post_meta() and concatenated directly into CSS strings that are output through wp_add_inline_style() without any escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses the injected page.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: wifi: fix leak if split 6 GHz scanning fails rdev->int_scan_req is leaked if cfg80211_scan() fails. Note that it's supposed to be released at ___cfg80211_scan_done() but this doesn't happen as rdev->scan_req is NULL at that point, too, leading to the early return from the freeing function. unreferenced object 0xffff8881161d0800 (size 512): comm "wpa_supplicant", pid 379, jiffies 4294749765 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 f0 81 13 16 81 88 ff ff ................ backtrace (crc c867fdb6): kmemleak_alloc+0x89/0x90 __kmalloc_noprof+0x2fd/0x410 cfg80211_scan+0x133/0x730 nl80211_trigger_scan+0xc69/0x1cc0 genl_family_rcv_msg_doit+0x204/0x2f0 genl_rcv_msg+0x431/0x6b0 netlink_rcv_skb+0x143/0x3f0 genl_rcv+0x27/0x40 netlink_unicast+0x4f6/0x820 netlink_sendmsg+0x797/0xce0 __sock_sendmsg+0xc4/0x160 ____sys_sendmsg+0x5e4/0x890 ___sys_sendmsg+0xf8/0x180 __sys_sendmsg+0x136/0x1e0 __x64_sys_sendmsg+0x76/0xc0 x64_sys_call+0x13f0/0x17d0 Found by Linux Verification Center (linuxtesting.org).

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: dm cache metadata: fix memory leak on metadata abort retry When failing to acquire the root_lock in dm_cache_metadata_abort because the block_manager is read-only, the temporary block_manager created outside the root_lock is not properly released, causing a memory leak. Reproduce steps: This can be reproduced by reloading a new table while the metadata is read-only. While the second call to dm_cache_metadata_abort is caused by lack of support for table preload in dm-cache, mentioned in commit 9b1cc9f251af ("dm cache: share cache-metadata object across inactive and active DM tables"), it exposes the memory leak in dm_cache_metadata_abort when the function is called multiple times. Specifically, dm-cache fails to sync the new cache object's mode during preresume, creating the reproducer condition. This issue could also occur through concurrent metadata_operation_failed calls due to races in cache mode updates, but the table preload scenario below provides a reliable reproducer. 1. Create a cache device with some faulty trailing metadata blocks dmsetup create cmeta <<EOF 0 200 linear /dev/sdc 0 200 7992 error EOF dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 262144 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 131072 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 1 writethrough smq 0" 2. Suspend and resume the cache to start a new metadata transaction and trigger metadata io errors on the next metadata commit. dmsetup suspend cache dmsetup resume cache 3. Write to the cache device to update metadata fio --filename=/dev/mapper/cache --name test --rw=randwrite --bs=4k \ --randrepeat=0 --direct=1 --size 64k 4. Preload the same table dmsetup reload cache --table "$(dmsetup table cache)" 5. Resume the new table. This triggers the memory leak. dmsetup suspend cache dmsetup resume cache kmemleak logs: <snip> unreferenced object 0xffff8880080c2010 (size 16): comm "dmsetup", pid 132, jiffies 4294982580 hex dump (first 16 bytes): 00 38 b9 07 80 88 ff ff 6a 6b 6b 6b 6b 6b 6b a5 ... backtrace (crc 3118f31c): kmemleak_alloc+0x28/0x40 __kmalloc_cache_noprof+0x3d9/0x510 dm_block_manager_create+0x51/0x140 dm_cache_metadata_abort+0x85/0x320 metadata_operation_failed+0x103/0x1e0 cache_preresume+0xacd/0xe70 dm_table_resume_targets+0xd3/0x320 __dm_resume+0x1b/0xf0 dm_resume+0x127/0x170 <snip>

denoland deno · Deno deno

Deno is a JavaScript, TypeScript, and WebAssembly runtime. Prior to 2.8.0, the Node.js compatibility TCP path checked the permission against the original hostname string before resolution and then did not re-check after resolution. A caller could therefore pass a numeric alias of an IP address (for example the decimal integer 2130706433 or the hex form 0x7f000001, both of which resolve to 127.0.0.1) and reach the denied destination through node:net.connect or node:http.request's { host, port } options form. This vulnerability is fixed in 2.8.0.

pragdave earmark

Improper Neutralization of Script in Attributes in a Web Page vulnerability in pragdave earmark allows stored cross-site scripting via unescaped HTML attribute values. 'Elixir.Earmark.Transform':_make_att1/2 in lib/earmark/transform.ex splices attribute values verbatim between two literal " bytes: [" ", name, "=\"", value, "\""]. Text nodes are routed through the existing escape function which encodes " as &quot;, but attribute values never visit that path. A markdown link whose URL or title contains a bare " closes the attribute early and lets the trailing bytes be parsed by the browser as fresh HTML attributes. For example, [click](http://example.com/?a=x" onerror="alert(1)) renders as <a href="http://example.com/?a=x" onerror="alert(1)">click</a>, executing arbitrary JavaScript in the victim's browser. The earmark library is no longer maintained and has been retired on Hex. No patched version will be released. All releases from 1.4.1 onward are affected, and users should migrate to a maintained Markdown library such as MDEx. This issue affects earmark from 1.4.1 onward.