Recherche « Eclipse Foundation Eclipse ThreadX »

Eclipse Foundation Eclipse ThreadX

One logical thread of a user-mode ThreadX module costs the Module Manager's shared object pool two allocations, not one. The module asks for a `TX_THREAD` control block through `txm_module_object_allocate`; `_txm_module_manager_thread_create` then takes a second allocation of `TXM_MODULE_KERNEL_STACK_SIZE` bytes for the privileged kernel stack that thread's system calls run on, and records it in the control block. Both come from `_txm_module_manager_object_pool` and both are linked onto the module's allocation list. The Module Manager's thread-delete dispatcher released only the first. The kernel stack stayed allocated until the whole module was stopped, so a module that creates, terminates and deletes threads in a loop — every state transition valid, every service returning `TX_SUCCESS` — removed a fixed block from a finite pool shared by the manager and by every other loaded module, on every cycle, for as long as it stayed loaded. Once the pool is exhausted, no memory-protected module can create any kernel object and no user-mode module thread can be created anywhere in the system. Vulnerable function: `_txm_module_manager_tx_thread_delete_dispatch`, in `common_modules/module_manager/inc/txm_module_manager_dispatch.h`.

Eclipse Foundation Eclipse ThreadX

The Module Manager's block-pool create dispatcher proved that two `ALIGN_TYPE` words of the extra-parameter array a memory-protected module supplies lay inside the module's data, and then used indices 0 through 3 of that array. One of the two unproved words is read by the dispatcher's own buffer check, which takes index 1 as the pool start and index 2 as the length to range-check it over. So the out-of-bounds read is performed by the validation code itself, before the kernel service is reached, and the size the caller's pool start is then validated against is a word the manager has not proved the module owns. The other unproved word is read when the service's argument list is built. Vulnerable function: `_txm_module_manager_tx_block_pool_create_dispatch`, in `common_modules/module_manager/inc/txm_module_manager_dispatch.h`.

Eclipse Foundation Eclipse ThreadX

The Module Manager's object lookup validated one byte of a memory-protected module's search name and then walked as much of it as the module declared, in privileged mode, with the kernel's preemption count raised. Both lookup dispatchers are affected: the recommended `txm_module_object_pointer_get_extended` is handed a length and does not use it to bound the buffer, and the deprecated `txm_module_object_pointer_get` supplies the largest value a `UINT` can hold, so it removes the bound rather than lacking one. A module can make the walk unbounded without knowing anything about the memory it reaches, and where the walk reaches memory a privileged read cannot take, the resulting fault leaves the kernel unable to preempt for the rest of the system's life. Vulnerable functions: `_txm_module_manager_txm_module_object_pointer_get_dispatch`, `_txm_module_manager_txm_module_object_pointer_get_extended_dispatch` (both in `common_modules/module_manager/inc/txm_module_manager_dispatch.h`) and `_txm_module_manager_object_name_compare` (`common_modules/module_manager/src/txm_module_manager_util.c`).

Eclipse Foundation Eclipse ThreadX

A ThreadX module reaches a kernel object's delete service through the Module Manager's dispatch layer, which asked one question about the pointer: does the object lie outside the module's own code and data. That is the policy for *using* an object, and using an object a module does not own is supported and intended — `txm_module_object_pointer_get_extended` searches the system's created objects by name and hands back objects the application created and objects other modules created, so that a module can send to a shared queue, take a shared semaphore or get a shared mutex. Destroying one of those is not sharing it. A module could name any object it had a pointer to and have the privileged dispatcher delete it.

Eclipse Foundation Eclipse ThreadX - NetX Duo

The Web add-on's HTTP server searches the entire request packet for header fields instead of stopping at the end of the header section. A header field name placed in the request body is therefore reported to the server as though it were a header, which lets a client control request framing decisions it should not be able to reach.

Eclipse Foundation Eclipse ThreadX - GUIX

`_gx_multi_line_text_view_display_info_get()` reads one byte past the end of the application's text buffer when the string it is given ends with a carriage return (`\r`). The over-read can also cause callers to advance their index past the end of the string, producing a second over-read in `_gx_multi_line_text_view_string_total_rows_compute()` and a row of text that is not in the source.

Eclipse Foundation Eclipse ThreadX - USBX

A malicious USB MTP/PTP device can cause the USBX host to read past a heap buffer during ordinary object enumeration, leaking adjacent heap contents to the application or faulting on an unmapped page.

Eclipse Foundation Eclipse ThreadX

A memory-protected ThreadX module's queue request reaches the Module Manager's dispatch layer, which decides how much of the module's buffer the privileged queue copy may touch and hands that extent to the module port's range check. A queue's `tx_queue_message_size` is a count of `ULONG`s and the copy moves that many words, so the extent is `message_size * sizeof(ULONG)` bytes. The front-send dispatcher passed the word count itself. `tx_queue_send` and `tx_queue_receive`, either side of it in the same header, have always multiplied. A source buffer ending `message_size` bytes into memory the module may read was therefore accepted, and `_txe_queue_front_send` then read `message_size * sizeof(ULONG)` bytes from it in privileged mode — `3 * message_size` bytes past the end of what the module is allowed to read. The words are written into the queue's message area, so a module that can receive from that queue reads them back.

Eclipse Foundation Eclipse ThreadX - GUIX

The GUIX software JPEG decoder reads four kinds of marker segment without checking that each is long enough to hold what it reads. A truncated segment is therefore read past the end of the caller's image buffer. Separately, a zero chroma sampling factor makes the block decode loop non-terminating. Both reproduce in the default configuration, in which `GX_SOFTWARE_DECODER_SUPPORT` is enabled.

Eclipse Foundation Eclipse ThreadX - GUIX

`_gx_binres_pixelmap_table_load()` in the GUIX binary resource (theme) loader indexes the pixelmap table with a value read verbatim from the resource file and never bounds it against the table size. A crafted theme drives a write of up to roughly 256 KB past the end of the table. The overflowed buffer is allocated by GUIX itself, through `_gx_system_memory_allocator`, rather than supplied by the caller, so the loader corrupts its own arena. The public API `gx_binres_theme_load()` takes no size parameter, so no amount of caller diligence prevents this. Reproduces in the shipped default configuration; `GX_BINARY_RESOURCE_SUPPORT` is enabled by default.

Eclipse Foundation Eclipse ThreadX - GUIX

`gx_binres_theme_load()` and `gx_binres_font_load()` take the resource as a bare `GX_UBYTE *` with no length, and `GX_BINRES_DATA_INFO` has no field to carry one. Every read is therefore performed at an offset the file itself chose, against a buffer whose extent the loader does not know. A resource that declares more data than it contains is read past its end, and an offset stored in the file is turned into a pointer without being bounded. This is a distinct defect from GHSA-hgcj-22cg-4hfv, which was an underflowed glyph count. It needs no underflow and no wrapped multiply: a perfectly well-formed, narrow glyph range reaches it.

Eclipse Foundation Eclipse ThreadX - GUIX

The GUIX JPEG software decoder enforces no ordering on JPEG markers. A file that places a second `SOF0` frame header after `SOS` re-runs the frame header parser after the output buffer has already been allocated and its geometry latched. The decoder returns `GX_SUCCESS` and publishes a `GX_PIXELMAP` whose reported dimensions and `data_size` exceed the allocation behind it. Any consumer that trusts the returned structure reads out of bounds, including GUIX's own display drivers, reached through the ordinary draw path. Reproduces in the shipped default configuration; `GX_SOFTWARE_DECODER_SUPPORT` is enabled by default.

Eclipse Foundation Eclipse ThreadX - USBX

A HID report descriptor is a sequence of items, each declaring in its header how many data bytes follow. The USBX host walks that sequence by advancing over each header and parsing the data behind it. The walk checked that an item fitted in the descriptor only **after** it had advanced past the header and parsed the payload, and the item analysis it relied on never measured the declared sizes against the bytes actually received. A HID peripheral returning a short report descriptor therefore drove a heap out-of-bounds read during ordinary enumeration.

Eclipse Foundation Eclipse ThreadX - USBX

A VideoStreaming interface reports the size of its whole class-specific descriptor block in the `wTotalLength` field of its input header. The USBX host recorded that figure and used it as the budget for walking the format, frame and frame-interval descriptors, without holding it against the configuration descriptor actually received. A device that reports a `wTotalLength` larger than the descriptors it supplies therefore had its own claim believed. Once the real bytes ran out the walk kept going, dereferencing the cursor past the end of the configuration buffer, in the host's context, whenever the application queried format or frame data.