Recherche « Eclipse Foundation Eclipse Che »

Eclipse Foundation Eclipse OpenJ9

In Eclipse OpenJ9 versions up to 0.63.0, the JITServer component is vulnerable to denial of service due to improper boundary checks during protocol message and reply handling. An unauthenticated remote attacker or malicious JITServer can transmit malformed network payloads that cause out-of-bounds heap reads, immediately crashing the JITServer daemon or client JVM process via a segmentation fault (SIGSEGV).

Eclipse Foundation Eclipse ThreadX

The Cortex-A7 MMU Modules port validates a caller-supplied buffer by translating **one address** — the first byte. The common Module Manager hands its range check the module instance, the start address and the complete byte size; the Cortex-A7 implementation discarded the instance and the size and asked the MMU a single question about the start. A memory-protected module therefore passed any range whose first byte was user-readable, however far the rest of it reached. Privileged dispatch code then read or wrote the whole range. Because every protected-module dispatcher that consumes a buffer or an extra-parameter array goes through this one macro, the defect is not in any individual service: it is in the primitive all of them rely on.

Eclipse Foundation Eclipse ThreadX

A ThreadX module chooses `object_size` when it calls `txm_module_object_allocate`. The Module Manager adds its own 16-byte private header to that size and asked the object pool for the result **without checking the addition**. A size near the top of a `ULONG` wrapped, the pool served a block far smaller than the header, and the manager then wrote the header past the end of it and into the neighbouring byte-pool block.

Eclipse Foundation Eclipse ThreadX

A ThreadX module allocates the control blocks of its kernel objects from the Module Manager's object pool, and can ask for that memory back by address with `txm_module_object_deallocate`. The manager released it whatever was in it, including a control block the kernel was still using. Deallocation is not deletion: the object stays on the created list for its type, a thread stays wherever it was on the ready or suspension lists and stays schedulable, and an active timer stays on the timer list. The byte pool is meanwhile free to hand those same bytes to the next allocation.

Eclipse Foundation Eclipse ThreadX - NetX Duo

The TLS 1.3 Certificate-message parser in NetX Secure decrements the message length to skip a context byte without first establishing that the message has a byte to skip. A zero-length Certificate message therefore wraps the unsigned length to `0xFFFFFFFF`, which makes the bounds check that follows vacuous and sends the parser reading past the session packet buffer. The trigger is a four-byte handshake header and requires no cryptographic validity. It is reachable pre-authentication.

Eclipse Foundation Eclipse ThreadX - NetX Duo

A missing bounds check in the TLS 1.3 Certificate-message parser of NetX Secure lets a malicious TLS 1.3 server trigger an unsigned-integer underflow and a subsequent heap out-of-bounds read in any peer that processes a remote Certificate message. It is reachable pre-authentication, during the normal handshake, before certificate verification completes.

Eclipse Foundation Eclipse ThreadX - GUIX

The GUIX binary resource loader never checks that a font page's glyph range is well formed. `gx_page_header_first_glyph` and `gx_page_header_last_glyph` are read verbatim from the file and only the upper bound of `last_glyph` is validated, so a page declaring `first_glyph > last_glyph` makes `last - first + 1` underflow to a very large unsigned count. That count is multiplied by a glyph record size to reserve the load buffer, and the multiply is unchecked, so it wraps to a small value and the loader allocates a buffer far smaller than the data it is about to write. The load pass then recomputes the count in a narrower type and writes attacker-controlled glyph records into the undersized buffer.

Eclipse Foundation Eclipse ThreadX - FileX

Mounting an attacker-controlled FAT image with fault tolerance enabled causes an out-of-bounds heap write during log replay. The write is attacker-positioned and attacker-valued, and on a common embedded memory layout it reaches the FX_MEDIA driver callback, giving control of the instruction pointer.

Eclipse Foundation Eclipse ioFog

In Eclipse ioFog Controller versions 3.8.0 through 3.9.1, POST, PUT, and PATCH bodies on routes that enable template substitution are rendered by an uncapped Liquid engine before authentication and RBAC. The bearer check does not reject a missing or invalid token, and the auth rate limit applies only to user login routes. A small JSON body can stall or abort the Controller process. The anonymous caller does not receive the rendered result; the impact is availability of the control plane, including the agent API and in-process WebSocket relays on that process.

Eclipse Foundation Adoptium Temurin

In the Eclipse Adoptium website (adoptium.net), in every deployment built from commit 0b24ea1 (2025-06-18) up to the fix in commit cbb53cf (2026-09-24), the post-download page /[locale]/download takes a download URL from the "link" query parameter and automatically navigates to it with a meta http-equiv="refresh". The URL is checked against a list of trusted prefixes using String.startsWith() on the raw string, while the browser applies RFC 3986 dot-segment normalisation before navigating, so a value such as https://github.com/adoptium/temurin/../../attacker/malware/releases/download/v1/jdk.exe passes the check but resolves to an attacker-controlled repository. A victim who follows a crafted adoptium.net link is shown the genuine "Thank you for downloading Eclipse Temurin" page while their browser downloads a binary of the attacker's choosing

Eclipse Foundation Eclipse Jetty

In Eclipse Jetty, HttpClient may receive a redirect of the form: ``` /secure/../evil ``` If an attacker is able to control the redirects, then HttpClient matches authentication credentials against `/secure` rather than normalizing the path to `/evil`, and will therefore follow the redirect sending the `Authorization` header for `/secure` to `/evil`. This also mean that the attacker must have an evil application deployed on the same domain as the target.

Eclipse Foundation NetX Duo

The NetX Secure DTLS server sends a HelloVerifyRequest carrying a freshly generated cookie, but never checks the cookie a client returns. The ClientHello parser copies the client's cookie bytes over the value the server issued, and the server then decides whether the client has been verified from the cookie's length alone. A peer that puts any single cookie byte in its first ClientHello skips the verification exchange entirely, so the server has no return-routability check and completes handshakes for forged source addresses.

Eclipse Foundation NetX Duo

`_nx_secure_x509_parse_signature_data` computes the certificate signature's length as `tlv_length - 1` without first checking that `tlv_length` is non-zero. A certificate whose signature is an empty ASN.1 BIT STRING therefore parses successfully and leaves the certificate holding a signature length of `0xFFFFFFFF` and a signature pointer one byte past the end of the buffer. Certificates are parsed from the peer during the TLS handshake, so the input is remote and unauthenticated.

Eclipse Foundation Eclipse Che

In Eclipse Che versions 7.29.0 and later, the GET `/api/scm/resolve` and `POST /api/factory/resolver` endpoints pass an attacker-controlled URL to `URLFetcher.fetch()`, which calls `new URL(url).openConnection()` with no scheme or host allow-list and returns the response body to the caller. Any authenticated Che user can read arbitrary local files via the file:// scheme (including the pod's Kubernetes service-account token at `file:///var/run/secrets/kubernetes.io/serviceaccount/token`), reach internal HTTP services and cloud instance metadata endpoints (169.254.169.254), and have their stored SCM personal access token attached as an `Authorization` header to a host of their choosing. The same credential-forwarding behavior also fires when a victim opens a workspace from a malicious devfile whose `parent.uri` points to an attacker-controlled server, enabling exfiltration of the victim's SCM PAT without direct API access. No fix is available.

Eclipse Foundation Eclipse BaSyx AAS Web UI

In Eclipse BaSyx AAS Web UI versions v2-241220 through releases before v2-260924, the shared request handler attached the selected infrastructure's `Authorization` header to outgoing requests without checking the destination origin. In deployments using authentication, an attacker could induce a user to open a crafted Web UI link whose `aas` or `path` query parameter points to an attacker-controlled endpoint. The user's browser would then send the configured Basic Authentication credentials, Bearer token, or an available OAuth2 access token to that endpoint. The attacker could reuse the disclosed credential to access protected AAS services with the victim's privileges. The issue is fixed in v2-260924.

Eclipse Foundation NetX Duo

The `_nx_secure_x509_asn1_tlv_block_parse()` function parses ASN.1 TLV (tag-length-value) blocks out of DER-encoded data. It is the primitive underneath all X.509 certificate parsing in NetX Secure, and therefore runs on certificates supplied by a remote peer during the TLS handshake. The function reads the one-byte ASN.1 tag from the caller's buffer *before* checking that the buffer holds at least one byte. When a caller passes a remaining length of zero, the guard correctly returns `NX_SECURE_X509_ASN1_LENGTH_TOO_LONG`, but the read has already happened one byte past the end of the buffer. code: nx_secure/src/nx_secure_x509_asn1_tlv_block_parse.c ``` UINT _nx_secure_x509_asn1_tlv_block_parse(const UCHAR *buffer, ULONG *buffer_length, USHORT *tlv_type, USHORT *tlv_tag_class, ULONG *tlv_length, const UCHAR **tlv_data, ULONG *header_length) { UINT current_index; USHORT current_tag; ULONG length; ULONG length_bytes; current_index = 0; current_tag = buffer[current_index]; /* <-- read before the bounds check */ if (*buffer_length < 1) { return(NX_SECURE_X509_ASN1_LENGTH_TOO_LONG); } ``` The remainder of the function is correctly ordered. The multi-byte length path is guarded by `length_bytes > 4 || length_bytes > *buffer_length` before its read loop, the decoded value is checked against `length > *buffer_length`, and the second single-byte length read follows its own `*buffer_length < 1` guard. The tag read is the only load placed ahead of its check.

Eclipse Foundation eclipse-threadx/levelx(NAND driver)

Mounting an attacker-controlled NAND flash image (`lx_nand_flash_open()`) triggers an unbounded out-of-bounds heap **write** in LevelX's NAND flash-translation-layer metadata parser that overwrites a driver function pointer in the control block, giving a demonstrated control-flow hijack — RIP set to a full 8-byte attacker-chosen value (register-verified). Two accompanying OOB reads. All reproduced verbatim under ASan at HEAD `9f1cfdc`. (The affected metadata-parser header states "Some portions generated by Copilot (Sonnet 4.6)" — an AI-generated parser with an unchecked on-flash count.)

Eclipse Foundation NetX Duo

Two client-side TLS/DTLS handshake parsers in NetX Secure read fields from a server-supplied message before validating that the message is long enough to contain them. Both are bounded out-of-bounds reads on a remotely reachable path, both are reached from a TLS or DTLS client connecting to a malicious or malformed server, and both have the same shape: the bounds check exists and returns the correct status, but it runs after the read it is meant to guard.

Eclipse Foundation eclipse-threadx/netxduo

An unauthenticated client can drain the RTSP server's packet pool with a couple of dozen requests that carry a Session header the parser cannot convert. The Session branch returns the raw NetX error code instead of an RTSP status code: ```c /* addons/rtsp/nx_rtsp_server.c:2754 */ status = _nx_utility_string_to_uint(field_value_ptr, field_value_length, &session_id); if (status) { return(status); /* NX_INVALID_PARAMETERS / NX_SIZE_ERROR / NX_OVERFLOW */ } ``` Every other branch of the same function maps its failure to an RTSP status first. The CSeq branch eighteen lines earlier does exactly that (line 2736 returns NX_RTSP_STATUS_CODE_BAD_REQUEST). The raw code then reaches `_nx_rtsp_server_error_response_send` (nx_rtsp_server.c:1234), which does not recognise it, takes a path that returns without releasing the response packet it already allocated, and the block never goes back to the pool. Six requests with an empty Session header against a 22 packet pool: ``` valid requests: after request 6: pool available = 21, AFTER = 22 / 22 malformed requests: after request 6: pool available = 16, AFTER = 17 / 22 ``` One block per request, not returned when the client disconnects. Twenty six requests take the pool to zero and the server starts failing allocations, after which it serves nobody. If the pool is shared with the rest of the application, as it is in the shipped sample, the rest of the stack stops with it. Convert the `_nx_utility_string_to_uint` failure in the Session branch into NX_RTSP_STATUS_CODE_BAD_REQUEST the way the CSeq branch does, and release the response packet on every exit path of `_nx_rtsp_server_error_response_send`.

Eclipse Foundation eclipse-threadx/netxduo

Any host on the LAN can send two mDNS records and make the responder write past the end of its transmit packet. The string table stores each name in a slot rounded up to a multiple of four: ```c /* addons/mdns/nxd_mdns.c:11436, 11443, 11447 */ memory_len = ((memory_len & 0xFFFFFFFC) + 8) & 0xFFFFFFFF; ... len = *((USHORT*)(p - 2)); /* slot size, not string length */ if ((len == memory_len) && ... _nx_mdns_name_match(start, memory_ptr, memory_size) ...) ``` The lookup that decides whether an incoming name is already stored compares the rounded slot size, so names of 12, 13, 14 and 15 characters share one bucket. A second name in the bucket is answered with the pointer to the first, and the record then carries a string up to three bytes longer than the length the caller accounted for. `_nx_mdns_packet_rr_add` (nxd_mdns.c:8911) sizes its only bound check from that stale length, and `_nx_mdns_name_string_encode` writes the real string. Two PTR records are enough, both ordinary mDNS responses to a `_http._tcp` query, with owner names whose lengths fall in the same bucket: ``` ==87491==ERROR: AddressSanitizer: heap-buffer-overflow WRITE of size 1 at 0x611000000124 thread T5 #0 _nx_mdns_name_string_encode addons/mdns/nxd_mdns.c:13096 #1 _nx_mdns_packet_rr_add addons/mdns/nxd_mdns.c:8911 0x611000000124 is 0 bytes to the right of 228-byte region ``` The overflow is one to three bytes of attacker-influenced name data past `nx_packet_data_end`. In a normal pool that lands in the next packet in the same pool rather than in a redzone, so the visible effect is a corrupted neighbouring packet or a corrupted pool free list rather than a clean crash. Compare the slot size against the stored string length before declaring a match, or keep the string length in the slot header and return it to the caller so the encoder and the bound check agree.

Eclipse Foundation NetX Duo

`_nx_icmpv6_validate_options()` scans the option area with `while (length > 2)` (`common/src/nx_icmpv6_validate_options.c:79`). An area whose size leaves a one- or two-byte residue exits the loop with that tail unexamined; the residue is not negative, so the function returns `NX_SUCCESS`. Its zero-length rejection never sees those bytes. Every consumer then re-walks the same area, reading a two-byte option header at the residue and subtracting `nx_icmpv6_option_length << 3` with no zero check and no remaining-length check. Three outcomes follow, selected by bytes the attacker controls. **Zero length byte.** The walker subtracts zero and advances zero. All four handlers loop forever — `_nx_icmpv6_process_ra` (`nx_icmpv6_process_ra.c:245, :528`), `_nx_icmpv6_process_ns` (`:251, :329`), `_nx_icmpv6_process_na` (`:147, :156`) and `_nx_icmpv6_process_redirect` (`:247, :350`). The walk runs in the IP thread, which is the highest-priority thread and does not yield inside the loop, so the system stops until a watchdog reset and the frame can be replayed after each one. **Non-zero length byte on a short residue.** The three unsigned counters underflow — `2 - 8` becomes `0xFFFFFFFA` — and the walk continues past the packet buffer, reading until it faults or meets a zero length byte and freezes. The Router Advertisement counter is signed and exits cleanly in this case. **One-byte residue.** The walker reads a two-byte option header, over-reading one byte. During a runaway walk, stray bytes parsing as a link-layer address option are copied into the neighbor cache (`nx_icmpv6_process_ns.c:280, :293`) and subsequently used as the destination MAC for frames to that neighbour, placing off-packet memory on the link. Confirmed by inspection, not reproduced.

Eclipse Foundation NetX Duo

The TFTP server accepts a DATA datagram of any size. The dispatcher rejects datagrams shorter than four bytes (nxd_tftp_server.c:1037) and nothing anywhere checks an upper bound, in particular not against the protocol maximum of 4 + NX_TFTP_FILE_TRANSFER_MAX. Two things follow from that one missing check, both reachable before any authentication because TFTP has none. The handler passes `nx_packet_length - 4` straight to FileX: ```c /* addons/tftp/nxd_tftp_server.c:1863, 1889 */ status = nx_packet_copy(packet_ptr, &temp_ptr, server_ptr -> nx_tftp_server_packet_pool_ptr, NX_WAIT_FOREVER); ... fx_file_write(&(client_request_ptr -> nx_tftp_client_request_file), packet_ptr -> nx_packet_prepend_ptr + 4, packet_ptr -> nx_packet_length - 4); ``` `nx_packet_length` is the length of a chain, not of one contiguous buffer, so FileX copies past the end of the first packet: ``` ERROR: AddressSanitizer: heap-buffer-overflow READ of size 1280 at 0x621000001108 thread T5 #0 __interceptor_memcpy #1 _fx_utility_memory_copy filex/common/src/fx_utility_memory_copy.c:78 0x621000001108 is 0 bytes to the right of 4104-byte region ``` Those bytes are written into the file the attacker is uploading, and a TFTP read request hands them back, so this is a memory disclosure with a convenient retrieval channel. The same datagram also wedges the server. `nx_packet_copy` at :1863 needs ceil(nx_packet_length / pool_payload) packets and asks for them with NX_WAIT_FOREVER, so when the attacker sizes the datagram beyond what the pool holds, the server thread suspends and never returns. A liveness probe after one such datagram times out with the pool at 0 of 12 packets and the server thread suspended, and no later client is served. Reject `nx_packet_length > 4 + NX_TFTP_FILE_TRANSFER_MAX` in the DATA branch before either call, and use a bounded wait rather than NX_WAIT_FOREVER for the copy.

Eclipse Foundation Eclipse Ankaios

In Eclipse Ankaios versions 0.1.0 through 1.0.2, the agent creates workload files and Control Interface named pipes (FIFOs) under a predictable path derived from the agent name and a hash of the workload's runtime configuration. If a directory or FIFO already exists at that path when the agent (re)starts, the agent reuses it based only on an existence and/or file-type check, without validating its owner or permissions. A local, unprivileged user with write access to the same base directory (by default under `$TMPDIR/ankaios`, e.g. shared `/tmp`) can pre-create this path hierarchy, including the two Control Interface FIFOs, before the agent starts. The agent then treats the attacker-owned FIFOs as the legitimate Control Interface for the targeted workload. The attacker can complete the Control Interface handshake and issue requests using that workload's configured `controlInterfaceAccess` permissions, allowing impersonation of the workload and, depending on its configured permissions, unauthorized reading and/or modification of the cluster's desired state.

Eclipse Foundation Eclipse aeriOS

Eclipse aeriOS Self-orchestrator versions prior to 1.2.1 contain a path traversal vulnerability in the REST API. User-controlled identifiers used to create, update, or delete Self-orchestrator resources were incorporated into filesystem paths without adequate validation or sanitization. An unauthenticated remote attacker able to access the Self-orchestrator API could therefore supply specially crafted identifiers containing path traversal sequences to write or delete JSON files outside the intended application directories, subject to the filesystem permissions of the Self-orchestrator process. The impact is increased by the absence of authentication on the affected API and by the container running with elevated privileges in the affected deployment configuration. The issue has been addressed in version 1.2.1 by introducing validation and sanitization of user-controlled identifiers before they are used to construct filesystem paths, preventing path separator characters from being used to escape the intended directories.

Eclipse Foundation Eclipse Arrowhead

In Eclipse Arrowhead versions from 5.0.0 to 5.2.1 the management-authorization gate that protects every /…/mgmt/… REST endpoint decides whether to apply its check by calling request.getRequestURL().toString().contains("/mgmt/"). Tomcat returns getRequestURL() un-decoded, while Spring MVC's DispatcherServlet routes on the decoded path. Requesting /serviceregistry/%6Dgmt/systems (%6D == m) therefore fails the substring check — the filter falls through without authorising — yet is decoded to /serviceregistry/mgmt/systems and dispatched to the management controller. Spring Security's StrictHttpFirewall (active via spring-boot-starter-security in arrowhead-common) only rejects encoded / \ . % ; and null bytes, so percent-encoded ASCII letters pass through. Any authenticated system — regardless of privilege — can reach every management operation, including POST /authentication/mgmt/identities which creates new sysop accounts, yielding full administrative takeover of the local cloud.

Eclipse Foundation Eclipse Theia

In Eclipse Theia versions 1.73.0 up to but not including 1.75.0, the AI "Agent Mode" file-change tools (writeFileContent, suggestFileContent, and the replacement and state helpers) resolved a model-supplied file path without a workspace-containment check. A crafted relative path such as ../.bashrc, an absolute path, or a ~-expanded path could therefore write or delete files outside the workspace with the privileges of the Theia backend OS user. Because the path argument is influenced by model output, it can be steered through indirect prompt injection, and in Agent Mode writes are applied without a confirmation dialog. Writing to a host-executed file such as a shell startup file or ~/.ssh/authorized_keys can escalate to code execution on the backend.