Recherche « Data field project data field »

baserproject basercms

baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, the public POST /baser/api/bc-mail/mail_messages/add/{mailContentId}.json endpoint accepts submissions without enforcing the form's auth_captcha setting. BcMail\Controller\Api\MailMessagesController::add() and MailMessagesService::create() omit the BcCaptchaService::check() verification of captcha_id and auth_captcha performed by MailController::submit() in the web UI. An unauthenticated attacker who can reach the API can therefore automate submissions without solving the enabled image challenge. The API disables FormProtection and has no rate limit; submissions can generate administrator-inbox spam, send attacker-influenced auto-replies to third parties when an email field is present, and accumulate mail_messages database records when save_info is enabled. The API already enforces the isAccepting() check added for CVE-2026-30878; the missing CAPTCHA check is a separate control failure. This issue has been patched in versions 5.3.2 and 5.4.2.

zephyrproject zephyr

The Infineon PSOC 6 BLESS HCI driver in drivers/bluetooth/hci/hci_infineon_psoc6_bless.c stored the outgoing HCI packet descriptor in a file-scope variable, static cy_stc_ble_hci_tx_packet_info_t hci_tx_pkt. psoc6_bless_send() cleared and populated that descriptor's packetType, dataLength and data fields before acquiring psoc6_bless_operation_sem, so the driver's serialising semaphore protected only the call into Cy_BLE_SoftHciSendAppPkt() and not the shared state that call reads. The Bluetooth host does not guarantee a single HCI sender. Most transmissions are funnelled through the cooperative TX-processor work queue, but bt_hci_cmd_send() deliberately bypasses bt_dev.cmd_tx_queue for BT_HCI_OP_HOST_NUM_COMPLETED_PACKETS and calls bt_send() directly from the caller's thread; that caller is bt_hci_host_num_completed_packets(), the acl_in_pool destroy callback, which runs on whichever thread drops the last reference to a received ACL buffer. CONFIG_BT_HCI_ACL_FLOW_CONTROL defaults to y on this driver's boards, and an application that returns -EINPROGRESS from its L2CAP recv callback and later calls bt_l2cap_chan_recv_complete() performs that unref from its own preemptible thread. A remote peer that generates Bluetooth traffic concurrently with the device's own transmissions raises the collision rate. When two senders interleave, the semaphore holder can hand the controller a descriptor whose dataLength comes from one net_buf and whose data pointer comes from another — or one whose buffer has already been returned to its pool. The controller then copies and transmits up to a full HCI/ACL payload starting at a shorter or recycled buffer, disclosing adjacent RAM contents to the connected peer; other interleavings duplicate one HCI packet and silently drop another, disrupting the link. The driver only reads through the shared descriptor, so no memory corruption or write primitive results, and the disclosed bytes are not attacker-chosen. The fix makes the descriptor a local variable in psoc6_bless_send(), removing the shared state; Cy_BLE_SoftHciSendAppPkt() copies the packet before returning, so it need not outlive the call.

zephyrproject zephyr

The Broadcom AFBR-S50 time-of-flight sensor driver double-completes an RTIO submission when sensor data evaluation fails. In data_ready_work_handler() (drivers/sensor/broadcom/afbr_s50/afbr_s50.c), a non-STATUS_OK return from Argus_EvaluateData() calls handle_error_on_result(), which finalises the request with rtio_iodev_sqe_err(), but execution then fell through to the tail of the function and finalised the very same struct rtio_iodev_sqe a second time with rtio_iodev_sqe_ok(). Unlike the other error branches in the same function, this one did not return. Both completion helpers reach rtio_executor_done() in subsys/rtio/rtio_executor.c, which returns the submission to the pool via rtio_sqe_pool_free() and, for streaming (multishot) submissions, also releases the RX buffer with rtio_release_buffer(). The second completion therefore reads a freed rtio_iodev_sqe, pushes the same mpsc node onto the submission queue while it is already on the pool free list — splicing the two lists together — and re-submits the freed request so the next measurement is written through an already-released buffer. For one-shot submissions it emits a spurious success completion carrying stale userdata and frees the same pool entry twice. The failure branch is driven by sensor conditions rather than by host software. The vendor API documents statuses such as ERROR_ARGUS_BIAS_VOLTAGE_REINIT and ERROR_ARGUS_LASER_MONITOR_INACTIVE as transient results of harsh ambient light, so a party in front of the optical sensor can provoke the invalid-data condition without any physical contact with the board or any software access; SPI transfer errors reach the same branch. In releases before the payload.Status check was dropped, ordinary sharp distance transitions in the sensor's field of view were sufficient. Impact is corruption of the RTIO submission pool and mempool bookkeeping: aliased submissions, writes through released buffers, and duplicate completions delivered to the application. The attacker does not control the corrupted content, so the practical consequence is memory corruption and loss of availability on devices that instantiate brcm,afbr-s50, rather than directed code execution. Only builds that enable this driver are affected.

zephyrproject zephyr

The user-mode syscall verifier z_vrfy_rtio_cqe_get_mempool_buffer() in subsys/rtio/rtio_syscalls.c validated its two output parameters, buff and buff_len, with K_SYSCALL_MEMORY_READ() rather than K_SYSCALL_MEMORY_WRITE(). Both are pure out-parameters: z_impl_rtio_cqe_get_mempool_buffer() stores the mempool buffer address and its length through them. The distinction is enforced by every architecture validator — arch_buffer_validate() on RISC-V PMP explicitly accepts the global __rom_region/__rodata_region for reads only, and the ARM MPU validators accept P_RO_U_RO and P_RW_U_RO regions for reads only — so a read-validated pointer is not necessarily writable by the calling thread. An unprivileged user-mode thread that has been granted access to an RTIO context (rtio_access_grant()) can invoke the rtio_cqe_get_mempool_buffer() syscall with buff/buff_len pointing at memory it may read but not write, and with a completion-queue entry whose flags field it fully controls (only RTIO_CQE_FLAG_MEMPOOL_BUFFER in flags[7:0] is required; flags[19:8] and flags[31:20] supply the block index and count). The kernel then performs a pointer-sized and a 4-byte store through those addresses while running in supervisor mode. Reaching the store requires CONFIG_USERSPACE together with CONFIG_RTIO_SYS_MEM_BLOCKS, the configuration behind RTIO_DEFINE_WITH_MEMPOOL; without the latter the implementation returns -ENOTSUP and writes nothing. Two outcomes follow. If the target lies in a memory-domain partition declared K_MEM_PARTITION_P_RW_U_RO (privileged read-write, user read-only), the kernel-mode store succeeds and deposits partly attacker-chosen values into memory the memory domain had marked read-only for that thread, bypassing the partition's write protection. If the target lies in globally readable but unwritable memory such as .text/.rodata in flash, the store faults in kernel mode; the fault is delivered to z_fatal_error() and the default k_sys_fatal_error_handler() halts or reboots the device, giving an unprivileged thread a reliable full denial of service. The read-permission check does bound the damage: the address must still be readable by the calling thread, so kernel-private memory cannot be targeted and no confidential data is disclosed. The fix replaces both checks with K_SYSCALL_MEMORY_WRITE(), so a thread lacking write permission is terminated by K_OOPS before the implementation runs; the cqe argument correctly remains read-validated.

zephyrproject zephyr

The UpdateHub firmware-over-the-air client parses the CoAP probe response with Zephyr's JSON library in z_impl_updatehub_probe() (subsys/mgmt/updatehub/updatehub.c). The decoder treats every descriptor field as optional — json_obj_parse() returns a bitmask of the fields it actually decoded and never fails on a missing one — so a response that omits the "sha256sum" string leaves the corresponding const char * in the zero-initialised struct resp_probe_any_boards / struct resp_probe_some_boards at NULL. Both metadata branches then computed sha256size = strlen(...objects.sha256sum) + 1 before any validation, dereferencing that NULL pointer; the SHA256_HEX_DIGEST_SIZE test that follows operates on a value the bad read has already produced and cannot prevent it. The metadata is supplied entirely by the network peer: probe_cb() accepts the datagram, runs coap_packet_parse() and copies the payload with no token matching and no cryptographic check. With CONFIG_UPDATEHUB_DTLS unset — the default — start_coap_client() uses plain CoAP over UDP on port 5683 with no peer authentication and resolves the server via unauthenticated DNS, so an on-path attacker, a DNS spoofer, or an off-path attacker who wins the race with a forged source address can deliver the malformed metadata. A probe response as simple as "objects":[[{}],[{}]] suffices, and no user interaction is required because updatehub_autohandler() polls on CONFIG_UPDATEHUB_POLL_INTERVAL. When CONFIG_UPDATEHUB_DTLS=y the trigger narrows to a malicious or compromised update server. The primitive is a read at address zero, not a write, so the impact is availability only. On targets where the low address range is unmapped or protected — MMU-based architectures, builds with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_DWT/_MPU/_PMP, TrustZone non-secure images, and SoCs such as nRF54L whose 0x0–0x400 window is unmapped — the load faults and Zephyr's default fatal handler halts the system, giving a remotely re-triggerable denial of service on every poll. On classic Cortex-M targets where the vector table is readable at address zero the walk usually terminates immediately and the request is rejected by the length check, so the outcome is configuration- and SoC-dependent. There is no memory write, and the copied bytes are only compared against the locally computed image hash, so there is no information-disclosure channel. The fix adds an explicit sha256sum == NULL test that returns UPDATEHUB_METADATA_ERROR ahead of the strlen() in both metadata branches. Debug builds (CONFIG_UPDATEHUB_LOG_LEVEL=4) still format the same pointers with %s in a LOG_DBG() loop that runs before the new checks, so that variant remains in debug configurations only.

AUTOMATIC1111 stable-diffusion-webui

A vulnerability was found in AUTOMATIC1111 stable-diffusion-webui up to 1.10.1. This impacts the function read_metadata_from_safetensors of the file modules/sd_models.py of the component Metadata Extraction. The manipulation of the argument header length field results in allocation of resources. It is possible to launch the attack remotely. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet.

zephyrproject zephyr

The receive path of the NXP KW41Z IEEE 802.15.4 driver, kw41z_rx() in drivers/ieee802154/ieee802154_kw41z.c, computed the payload size as pkt_len = len - KW41Z_FCS_LENGTH in a uint8_t, where len is the frame length reported by the radio. The interrupt handler kw41z_isr() obtained that length from the RX_FRAME_LENGTH field of the ZLL IRQSTS register — a copy of the PHY header length byte of the frame received over the air — and only rejected the value zero. A reported length of one therefore underflowed to pkt_len == 255. Because the packet is allocated with NET_AF_UNSPEC on a non-Ethernet L2, net_pkt_rx_alloc_with_buffer() does not clamp the request to the interface MTU; with the default fixed-size buffer pool (CONFIG_NET_BUF_FIXED_DATA_SIZE, CONFIG_NET_BUF_DATA_SIZE=128) the allocation succeeded as a chain of two fragments. The subsequent register-to-buffer copy loops write into the first fragment only, so 255 bytes were written into a 128-byte net_buf data block, overrunning it by up to 127 bytes into adjacent network-buffer-pool memory, and reading up to 128 bytes past the end of the radio's PKT_BUFFER_RX register array. The length field originates from an unauthenticated frame transmitted by any device within 802.15.4 radio range, and is captured by the hardware at PHY-header time — before frame filtering has completed — while the handler samples it after clearing the interrupt status, so an attacker flooding frames with a length byte of one can drive the underflow. The impact is memory corruption in the shared receive buffer pool from interrupt context, most plausibly a crash or corruption of other packets' data; the overflowing bytes are radio register contents rather than attacker-authored data, which bounds the integrity impact. The fix rejects any length below KW41Z_FCS_LENGTH and additionally verifies net_buf_tailroom() of the first fragment before the copy loops, which also covers the CONFIG_NET_L2_OPENTHREAD variant of the size computation.

makeplane plane

Plane is an open-source project management tool. Prior to 1.4.0, multiple issue-listing endpoints, including unauthenticated public deploy boards handled by IssueListSpaceEndpoint in apps/api/plane/space/views/issue.py, pass the user-controlled order_by parameter through order_issue_queryset in apps/api/plane/utils/order_queryset.py to Django's order_by without allowlist validation. An attacker can use double-underscore relationship traversal to reference arbitrary related model fields, revealing database schema details through errors and potentially disclosing field values through differential ordering. This issue is fixed in version 1.4.0.

Gleam

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in gleam-lang gleam allows a malicious package publisher to delete a directory outside the project's build directory when a developer builds a project. A Hex package release's metadata carries an app field with the release's OTP application name. Gleam reads this field from the hex.pm release API when it downloads dependencies and uses it as the package's build directory name without validating it (hex_manifest_package in compiler-cli/src/dependencies.rs, ProjectPaths::build_directory_for_package). When a dependency fails to compile, Gleam deletes that directory with remove_dir_all. hex.pm didn't restrict the field to a directory name before 2026-10-12, so a publisher could set it to a value such as ../../../../target or an absolute path. When a project depends on such a release directly or transitively and the release fails to compile, gleam build, gleam check, gleam run, gleam test or gleam export deletes the directory the name resolves to. For a pure Gleam package no publisher code runs. This issue affects gleam: from 0.32.4 before 1.19.2.

djangoproject Django

An issue was discovered in Django 6.1 before 6.1.2, 6.0 before 6.0.9, and 5.2 before 5.2.18. `django.forms.models.BaseModelFormSet.save_existing_objects()` used the presence of a primary key on a submitted form's instance as evidence that the instance belonged to the formset's limiting queryset. An object outside that queryset is represented by a newly constructed instance whose primary key can still be populated from submitted data when the model's primary key is a field accepted by the form, such as a `OneToOneField` or parent link used as the primary key of an inline formset's model, or a natural or UUID primary key included in the form's fields. This allows an authenticated user permitted to submit such a formset to delete rows outside the limiting queryset, without any permission on the targeted object, via forged management-form data marking an out-of-queryset object for deletion. Models using the default AutoField primary key are not affected. Earlier, unsupported Django series (such as 5.1.x, 5.0.x, and 4.2.x) were not evaluated and may also be affected. Django would like to thank Seonggwon Yoon for reporting this issue.

vllm-project vllm · Vllm vllm

vLLM is an inference and serving engine for large language models. Prior to 0.30.0, the /inference/v1/generate endpoint in the disaggregated scale-out path accepts caller-supplied tensors in the features.kwargs_data field, cache identifiers in the features.mm_hashes field, ranges in the features.mm_placeholders field, and wire-selected multimodal field processors without rebinding them to the active model renderer contract. Forged grid geometry, field types, or non-positive placeholder lengths can terminate the shared EngineCore; when an attacker knows or can induce a victim's content hash, forged cache hashes can poison or retrieve cross-request encoder-cache state; and dropped sparse placeholder masks can alter replayed transport semantics. This issue is fixed in version 0.30.0.

zephyrproject zephyr

The native BSD-socket layer recorded a pending asynchronous socket error by type-punning it into struct net_context's void user_data field (ctx->user_data = INT_TO_POINTER(-status) in zsock_accepted_cb(), zsock_received_cb(), zsock_connected_cb() and zsock_close_ctx() in subsys/net/lib/sockets/sockets_inet.c), reading it back with POINTER_TO_INT(). That same field is owned by the network stack for listening TCP contexts: net_tcp_accept() stores the parent context pointer there and the TCP core passes it back to the registered accept callback. A failed accept therefore left a small integer (an errno value) where the stack expected a struct net_context . When the network interface carrying a listening TCP socket goes down, close_tcp_conn() in subsys/net/ip/tcp.c invokes the accept callback with -ENETDOWN and the context's user_data. In v4.3.0 the callback was not disarmed afterwards, so a second interface-down event forwarded the previously stored errno to zsock_accepted_cb(), which dereferenced it as the parent context and performed several stores through it (sock_set_error()'s read-modify-write of socket_data, k_fifo_cancel_wait(&parent->recv_q)) — the crash described in the fix's commit message. v4.3.1 and v4.4.x carry a later change clearing conn->accept_cb after the error callback (269cb8823d3 on the v4.3 branch, 913fae5169425550f2364655298fceb79b320066 on main), which closes that repeat path; on those releases the poisoned cookie remains reachable only by a narrower race, a handshake completing alongside the interface-down still passing the stale cookie to k_fifo_put(&parent->accept_q, ...), and by getsockopt(SO_ERROR), which reads the field back unconditionally. On v4.3.0 an application that keeps a listening TCP socket open across repeated link-down events is sufficient to reach the defect; the triggering condition is a network-interface state change, not attacker-supplied packet data, so the practical attacker is one able to force the link down repeatedly (for example an adjacent attacker disrupting a wireless link) or one with local/physical access. Because both the faulting address and the stored data are fixed small constants derived from the errno value, the outcome is a wild-pointer access leading to a kernel fatal error — a denial of service (device crash or reset) rather than an attacker-directed memory corruption. The fix stores the pending error in a dedicated net_context.sock_error field and converts every producer and consumer to sock_set_error()/sock_get_error(), leaving user_data untouched. As a side effect it also stops getsockopt(SO_ERROR) — which is evaluated unconditionally — from returning the kernel address held in user_data to a userspace application.

ail project ail framework

The AIL Framework crawler splash domain page (showDomain.html) is vulnerable to stored cross-site script injection (XSS). User-supplied data originating from imported crawler captures—specifically item IDs, URLs, and screenshot file paths—was interpolated directly into inline JavaScript contexts within the HTML template. This included an onclick attribute that embedded raw screenshot and URL values into a JavaScript function call, and an inline script block that assigned a screenshot value to a JavaScript variable without escaping. An attacker with a user-role API client could craft a malicious crawler capture import containing JavaScript payloads in these fields. When any user (including privileged users) subsequently viewed the affected domain page, the injected script would execute in the victim's browser context, potentially allowing session hijacking, data exfiltration, or unauthorized actions on behalf of the victim. The vulnerability is stored in the application's data layer and triggered upon page rendering, requiring no further interaction beyond loading the domain view.

ail project ail framework

The AIL Framework tag selector component (var/www/static/js/tags.js) is vulnerable to stored cross-site scripting (XSS). A user with the ability to create a custom tag could embed an HTML payload containing JavaScript event handlers (e.g., <img src=x onerror=alert(1)> or <svg onload=...>) in the tag name. When another authenticated user opened a page containing the tag selector, the malicious tag name was inserted into the DOM using jQuery's html property, causing the embedded script to execute in the victim's browser context. The vulnerable code paths affected both the suggestion/combo-item rendering (_renderComboItems) and the selected-tag rendering logic. In both cases, the display value derived from the tag's displayField was passed directly to the html property of a jQuery element constructor, which parses and inserts the string as raw HTML rather than as text. Preconditions: the attacker must have an authenticated account with permission to create custom tags, and the victim must be an authenticated user who views a page that renders the tag selector with the attacker's stored tag. The attack is stored (persistent) and does not require the victim to perform any action beyond loading the page. Security impact: successful exploitation allows arbitrary JavaScript execution in the victim's browser within the application's origin, potentially leading to session hijacking, unauthorized data access, form manipulation, or further client-side attacks.

zephyrproject zephyr

The Espressif ESP-hosted Wi-Fi driver (drivers/wifi/esp_hosted/) parses frames received over SPI from the ESP co-processor in esp_hosted_event_task(). For control frames it took the 16-bit TLV field data_length straight off the wire and passed it to pb_istream_from_buffer(frame.data_value, frame.data_length) without checking it against the frame length or the receive buffer. frame.data_value sits 26 bytes into a 3188-byte stack object, so a data_length of up to 0xFFFF makes pb_decode() read up to roughly 62 KB past the end of that object. Only the first fragment of a fragmented control response carries a TLV header; the pre-fix driver performed half-duplex SPI transactions and silently discarded any frame the co-processor queued while the host was transmitting (esp_hosted_hal_spi_transfer() aliased the RX buffer onto the TX buffer). When the discarded frame is the first fragment of a fragmented response, the driver treats the next fragment as a new frame — its per-fragment header and checksum are genuine, so both validation steps pass — and reads the TLV header out of raw protobuf continuation bytes. Those bytes come from control responses whose size and content an adjacent, unauthenticated attacker can influence, notably the AP scan list, which grows with the number and SSID length of access points in radio range. The impact is denial of service rather than disclosure. Reading past the end of the RAM region faults the device, and CONFIG_NANOPB_ENABLE_MALLOC is selected by the driver, so garbage length prefixes read out of bounds also drive heap allocations. The out-of-bounds bytes themselves do not reach the application: pb_decode() is started mid-stream on raw protobuf continuation bytes and so almost always fails outright, and anything that did decode would still have to pass esp_hosted_response(), which requires an exact msg_id match against the pending request, and then esp_hosted_ctrl_response(), which requires a success resp — an attacker influences the size and content of legitimate control responses, not the structure decoded out of misaligned bytes. Two related defects in the same receive path make the denial of service permanent: the fragment reassembly guard was sized with ESP_FRAME_SIZE instead of ESP_FRAME_MAX_PAYLOAD and, when tripped, returned from the sole RX thread instead of dropping the frame, and unhandled control events were queued with k_msgq_put(..., K_FOREVER) on an eight-entry queue that nothing drains, blocking that same thread. The driver has no watchdog or restart path, so either condition ends all Wi-Fi reception until the device is rebooted.

zephyrproject zephyr

The Intel SEDI IPM (inter-processor mailbox) driver in drivers/ipm/ipm_sedi.c handles an inbound message interrupt in ipm_event_dispose(). It read the peer-written doorbell register, extracted the payload length with IPC_HEADER_GET_LENGTH(), and passed that length straight to sedi_ipc_read_msg() to copy the message into struct ipm_sedi_context.incoming_data_buf, without checking it against the buffer size. The doorbell length field is 10 bits wide (IPC_HEADER_LENGTH_MASK is 0x03FF), so it can encode up to 1023 bytes, while incoming_data_buf is IPC_DATA_LEN_MAX (128) bytes. The bounds check in the underlying HAL sedi_ipc_read_msg() is a DBG_CHECK that compiles away unless CONFIG_DEBUG is set, so no check remained in a production image. The doorbell register is written by the peer processor on the other side of the IPC link — for the intel_ish_5_* targets, the host CPU's ISH driver, reached through the device's memory-mapped register window. Host-side software with driver-level or raw BAR access can therefore set a length of up to 1023 and cause the interrupt handler to copy far past the destination buffer. The affected path requires an application to have registered an IPM receive callback via ipm_register_callback(), which is the driver's normal mode of use. The result is an out-of-bounds write of up to 895 bytes into static (.bss) memory, performed in interrupt context. The overflow first clobbers the rest of struct ipm_sedi_context — including the k_sem and k_mutex used by the transmit path, whose wait queues contain self-referential list pointers — and then adjacent static data, giving a kernel data-structure corruption and crash primitive. The overflowing bytes are read from registers following the message window, a portion of which are themselves peer-programmable. The fix rejects any doorbell whose encoded length exceeds IPC_DATA_LEN_MAX, logging it and acknowledging the doorbell so the peer is not left waiting.

zephyrproject zephyr

gptp_mi_qualify_announce() in subsys/net/l2/ethernet/gptp/gptp_mi.c walks the Path Trace TLV of a received IEEE 802.1AS Announce message, comparing each clock identity against the local one. The loop bound was taken solely from the attacker-controlled wire field announce->steps_removed (accepted up to 254), never from announce->tlv.len, which is the field that states how many identities the TLV actually carries. Because path_sequence is the flexible member of the wire TLV (struct gptp_path_trace_tlv) and GPTP_ANNOUNCE() yields a raw pointer into the received packet buffer, the memcmp() inside the loop can address memory well past the end of the received frame. The stack's only length validation, GPTP_ANNOUNCE_CHECK_LEN(), requires the received gPTP payload to be exactly 68 + tlv.len bytes — so it does not constrain the loop, it guarantees the data is absent. An unauthenticated attacker on the same Ethernet segment can send a single Announce frame declaring tlv.len = 0 with steps_removed = 254; the frame passes the length check and reception path (net_gptp_recv() → gptp_handle_msg() → gptp_mi_qualify_announce()), which performs no authentication, and the loop then reads 255 entries of 8 bytes each — about 2 KB — beyond the end of the network buffer. The impact is an out-of-bounds read. The bytes read are only used as a memcmp() operand and are never returned to the attacker, so there is no meaningful information disclosure; the practical risk is that the overread crosses a network buffer pool boundary into unmapped or MPU-protected memory and faults the networking RX thread, causing a denial of service. Exposure is limited to builds that enable the opt-in, experimental CONFIG_NET_GPTP (TSN/AVB deployments) and to attackers with layer-2 adjacency, since gPTP frames are sent to a link-local multicast address and are not routed. The fix computes the true entry count as tlv.len / GPTP_CLOCK_ID_LEN and rejects the announce when steps_removed + 1 exceeds it, so the loop can no longer run past the data the packet-length check proved present.

Openpanel-dev openpanel

In OpenPanel through 2.3.0, the data importer fetches a caller-supplied URL with plain fetch instead of the project's existing SSRF guard (apps/api/src/utils/safe-fetch.ts). In packages/importer/src/providers/umami.ts, parseRemoteFile calls fetch() on config.fileUrl, which is validated only by z.string().url(), so values such as http://127.0.0.1:9911/ or http://169.254.169.254/latest/meta-data/ are accepted; the shared createFileImportConfig factory gives the plausible provider the same field. An authenticated organization member — including a default 'member' with no project_access rows, for whom the intended access-level check is skipped because getProjectAccess returns boolean true rather than a level object — can therefore make the server connect to any address reachable from it. The resulting HTTP status and status text are persisted as Import.errorMessage and returned by import.get to the same user, providing a scanning oracle for internal hosts, ports and paths; if an internal response parses as Umami CSV, its rows are ingested as events and become readable in the attacker's analytics views.

zephyrproject zephyr

The Bluetooth Classic (BR/EDR) L2CAP receive handler bt_l2cap_br_recv() in subsys/bluetooth/host/classic/l2cap_br.c dispatched inbound data PDUs based only on the destination channel ID, without checking that the target channel had reached the BT_L2CAP_CONNECTED state. A dynamic channel is assigned its RX CID and added to the connection's channel list while still in BT_L2CAP_CONNECTING (and later BT_L2CAP_CONFIG) — before configuration completes and, for PSMs that require security, before the peer is authenticated (l2cap_br_conn_req()). Because the channel is already findable by bt_l2cap_br_lookup_rx_cid() during this window, a remote peer within radio range can send a data PDU addressed to that CID and have it processed on a not-yet-established channel. The dispatch keys off channel fields (BR_CHAN(chan)->rx.mode, rx.mps) that are only initialized during configuration by l2cap_br_conf(); since channel objects are pooled and bt_l2cap_br_chan_del() does not reset rx.mode or the reassembly buffer _sdu, a reused channel can carry stale state into the CONNECTING window and route the frame into the retransmission/flow-control path (bt_l2cap_br_ret_fc_recv()) with stale parameters and a possibly stale _sdu pointer. The impact is delivery of attacker data to upper-layer protocol handlers on a half-open (and possibly unauthenticated) channel, plus operation on stale or partially initialized channel state on reused channel objects — leading to channel/link teardown (denial of service) and, in the stale-_sdu case, a dangling-pointer condition. The fix adds an explicit BR_CHAN(chan)->state < BT_L2CAP_CONNECTED guard that drops any data received before the channel is fully connected.

MISP · Misp-project misp

Affected versions of MISP contain inconsistent authorization checks across dashboard widgets that display organisation information. Several organisation-related widgets did not honor Security.hide_organisation_index_from_users. As a result, authenticated users without the perm_sharing_group permission could enumerate organisations even though the normal organisation index was intentionally hidden from them. The affected widgets included paths that: * returned organisation names and identifiers; * could expose additional organisation database fields through JSON export because unrestricted find('all') queries fetched full rows; * accepted limit=0 or negative values in a way that could effectively remove the result limit and return the entire organisation table. A related organisation-contributor leaderboard also ignored the same visibility setting. Its handler counted Event.orgc_id across the entire event table and mapped those IDs to organisation names, revealing every organisation with events regardless of whether the caller could see any of those events. The fix withdraws this widget entirely for users who lack organisation-index visibility. Version affected: ≤2.5.45

MISP · Misp-project misp

Affected versions of MISP expose organisation metadata through the dashboard organisation picker without applying the same visibility restrictions enforced by the normal organisation index and per-organisation view. The affected endpoint returned fields including:  - organisation ID;  - UUID;  - name. When Security.hide_organisation_index_from_users was enabled, normal organisation enumeration was restricted, but the dashboard picker still queried all organisations. This allowed authenticated users to discover organisations that should have remained hidden from them. The fix calls Organisation::createConditions($this->Auth->user()) and appends the resulting ACL conditions to the picker query. Ordinary users are thereby limited to organisations associated with events or proposals they can already see, plus their own organisation, while users with the appropriate sharing-group privilege retain broader visibility. Version affected: ≤2.5.45

MISP · Misp-project misp

Affected versions of MISP do not enforce parent-event visibility when serving cryptographic keys through CryptographicKeysController::view(). The vulnerable handler queried CryptographicKey directly using the supplied key ID and selected sensitive fields such as: * type * key_data * fingerprint but did not fetch or authorize the associated parent event first. The upstream commit explicitly states that cryptographicKeys/view could return a protected event’s signing key to any authenticated user. The fix adds parent_id and parent_type to the lookup and then enforces authorization through the associated event using fetchSimpleEvent($user, parent_id). If the parent is not an Event, access is limited to site administrators. Version affected: ≤2.5.45

wger-project wger

wger before 2.6 fails to sanitize first_name and last_name fields in the gym member TSV export endpoint, allowing any gym member to inject spreadsheet formulas. Attackers can inject formulas like =HYPERLINK to exfiltrate admin data or execute code when admins open the exported file in Excel or LibreOffice Calc.

misp · Misp-project misp

A vulnerability in MISP's event template handling allowed an authenticated user with permission to create or modify event templates to bypass validation of the template definition field. The EventTemplate::beforeValidate() method only performed semantic validation when the supplied definition was already represented as an array. If a caller instead supplied a pre-encoded string, including malformed JSON or JSON representing an unexpected data type, the value bypassed validateDefinition() and only needed to satisfy the generic notBlank validation rule. As a result, an invalid event template definition could be stored persistently in the database. When event templates were subsequently retrieved, EventTemplate::afterFind() attempted to decode the stored definition using JsonTool::decode() without handling decoding failures. A definition containing invalid JSON could therefore trigger an exception during retrieval. Because the event template index is available to all authenticated users, a single malicious or malformed template could make the event template listing and other functionality relying on EventTemplate queries return HTTP 500 errors until the offending database row was manually repaired. Valid JSON representing an unexpected type, rather than the expected JSON object, could similarly result in invalid data reaching downstream consumers. The vulnerability can therefore be exploited by a user capable of saving event templates to persist malformed template data and cause a persistent denial of service against event-template functionality for other users. The patch enforces that event template definitions must be supplied as structured objects before saving and always applies semantic validation. On retrieval, malformed JSON and definitions that do not decode to the expected structure are caught, logged, and replaced with an empty definition, preventing a malformed database entry from breaking all event template queries.  Poisoning doesn't seem reachable according to the lead developer.

Jenkins Project Jenkins

In Stapler 2107.v8dfcb_e8ed317 and earlier, except 2088.2093.vd7c3e58008a_6, included in Jenkins 2.579 and earlier, LTS 2.568.2 and earlier, form data binding allows setting public static fields of the bound configuration object, allowing attackers who can submit configuration forms to modify public static fields of the configuration objects those forms are bound to, resulting in changes that apply globally to the Jenkins instance.

Drupal Data field · Data field project data field

Missing Authorization vulnerability in Drupal Data field allows Forceful Browsing. This issue affects Data field versions: from 0.0.0 to 2.0.13.

ash-project ash_typescript

Generation of Error Message Containing Sensitive Information vulnerability in ash-project ash_typescript allows an unauthenticated attacker to read internal application data from an HTTP 500 response body. When a typed-controller route handler returns anything other than a %Plug.Conn{}, dispatch/3 in lib/ash_typescript/typed_controller/request_handler.ex passes the value to unexpected_return/2, which interpolates inspect(value, limit: 50) directly into the response message. The limit option bounds elements per collection rather than the term as a whole, so a handler falling through with a term such as {:error, %User{}} or a changeset serialises its full field set, including hashed passwords, tokens, and tenant identifiers, into the JSON error returned to the caller. This contradicts the module's own posture elsewhere: the rescue clause gates Exception.message/1 behind AshTypescript.typed_controller_show_raised_errors?/0 and otherwise returns a generic message, while this path is ungated and always echoes. This issue affects ash_typescript: from 0.15.0 before 0.18.0.

zephyrproject zephyr

The LwM2M JSON content formatter's get_string() in subsys/net/lib/lwm2m/lwm2m_rw_json.c copies a parsed JSON string into a caller-supplied buffer and NUL-terminates it. The length guard used if (string_length > buflen), which accepts a string whose length is exactly buflen. After memcpy() fills the whole buffer, buf[string_length] = '\0' then writes one byte past the end of the buffer (CWE-787). The string value and its length are taken directly from the incoming CoAP payload during a LwM2M WRITE: do_write_op_json() parses the payload obtained from coap_packet_get_payload(), and get_string() is invoked from lwm2m_write_handler() (engine_get_string() in subsys/net/lib/lwm2m/lwm2m_message_handling.c) for a LWM2M_RES_TYPE_STRING resource. The destination buf/buflen is either the resource instance's fixed data buffer (res_inst->data_ptr/max_data_len) or the engine validation buffer (msg->ctx->validate_buf). A LwM2M server (the client's DTLS peer) can therefore write a string resource with a value whose length equals the target buffer size and force a one-byte overflow. The overflow is a single out-of-bounds write of the constant byte 0x00 immediately past the resource or validation buffer, corrupting the adjacent byte in memory. It is not an information leak and the written value is fixed, so it is not a direct code-execution primitive, but it can corrupt adjacent state (an adjacent resource value, a length/flag field, or a struct field) and cause data corruption or a crash. Triggering the write is deterministic; the resulting impact depends on memory layout. The fix changes the guard to string_length >= buflen, rejecting the exact-length case and aligning the JSON formatter with the other content formatters (lwm2m_rw_plain_text.c, lwm2m_rw_oma_tlv.c, lwm2m_rw_senml_json.c, lwm2m_rw_cbor.c, lwm2m_rw_senml_cbor.c), which already used the correct boundary check.

WeblateOrg weblate

Weblate is a web-based continuous localization platform used to manage software translations. In versions prior to 2026.7, an authenticated user with access to a project can retrieve the change history of restricted components in that project through nested API change endpoints, even without permission to view those components directly. The nested endpoints do not apply the component-level access checks enforced on the direct component views, so the requester can enumerate changes for components that should be hidden from them. The exposed data can include the restricted component's identity, translation and unit links, and change payload fields such as source or translated string content in the target, old, and details values. This issue is fixed in version 2026.7.

zephyrproject zephyr

The IEEE 1588 PTP management-message parser in subsys/net/lib/ptp/tlv.c mishandles the PTP_MGMT_TIME management id. In tlv_mgmt_post_recv(), the PTP_MGMT_TIME case casts mgmt_tlv->data to a 10-byte struct ptp_timestamp and reads it (then byte-swaps and writes it back) without first checking that the TLV data field is at least sizeof(struct ptp_timestamp). Every sibling management id in the same switch validates its length first; PTP_MGMT_TIME was the only case lacking that check. The length passed in is the management data size (tlv->length - 2), and the upstream guard in ptp_tlv_post_recv() only requires tlv->length > 2, while msg_tlv_post_recv() validates only that the TLV fits within the received byte count, not a per-id minimum. A peer on the local PTP segment can therefore send a PTP_MSG_MANAGEMENT message carrying a short PTP_MGMT_TIME TLV (data as small as 2 bytes), causing the parser to read and write 8 bytes beyond the validated data. The message type and TLV contents are taken straight off the wire, so the path is reachable by any adjacent attacker when CONFIG_PTP is enabled. The over-read and write-back stay within the struct ptp_msg allocation (mgmt_tlv->data lives in the leading mtu[NET_ETH_MTU] union member, so data + 10 lands at most a few bytes past mtu[], inside the same object), so this is an out-of-bounds read of adjacent in-object memory plus a bounded in-place corruption of the message's parsed timestamp, not past-allocation memory corruption. Impact is limited to minor information exposure of adjacent bytes and corruption of the device's parsed management TIME value; there is no crash on the access and no reachable reference-count corruption. The fix adds if (length < sizeof(struct ptp_timestamp)) { return -EBADMSG; } before the cast, matching the other management-id cases and fully closing the receive-path defect.

zephyrproject zephyr

The OCPP 1.6 client in subsys/net/lib/ocpp/ocpp.c reconstructs a session handle and PDU id from the uid field of a CALLRESULT message. In ocpp_process_server_msg() the code calls atoi(strtok_r(uid, "-", &tmp)) without checking the strtok_r return value. When the server-supplied uid is empty or contains no - delimiter, strtok_r() returns NULL and atoi(NULL) dereferences a NULL pointer, which is undefined behaviour. The uid originates from network data: parse_rpc_msg() in subsys/net/lib/ocpp/ocpp_j.c JSON-parses a frame received from the OCPP central system over TCP/WebSocket and copies the server-controlled string into the local buffer. A malicious or compromised central system, or a man-in-the-middle on a non-TLS ws:// connection, can return a malformed uid to reach the defect. No authentication beyond the existing server connection (or MITM position) is required, and the reconstructed pointer is membership-validated by ocpp_session_is_valid(), so the impact is limited to the NULL dereference rather than arbitrary pointer use. On Zephyr targets that trap access to address 0 (MMU/MPU platforms or CONFIG_NULL_POINTER_EXCEPTION_DETECTION), the dereference faults inside the OCPP reader thread and invokes the fatal handler, producing a remote denial of service of the charge point; on bare targets where address 0 is readable the call returns 0 and is benign, so the impact is availability-only and platform-conditional. The applied fix guards only the first atoi(); the second strtok_r(NULL, "-", &tmp) followed by pdu = atoi(buf) in the same function remains unguarded and the identical NULL dereference is still reachable from the same network input when the uid has a first token but no second --delimited token. A complete fix should validate the second token as well.

zephyrproject zephyr

The Zephyr ext2 filesystem driver fails to validate the s_log_block_size field of the on-disk superblock when mounting a filesystem. ext2_verify_disk_superblock() in subsys/fs/ext2/ext2_impl.c checks the magic number, revision, inode size and group counts, but never bounds s_log_block_size. On a successful verify, subsys/fs/ext2/ext2_ops.c computes fs->block_size = 1024 << superblock.s_log_block_size from this attacker-controlled uint32_t, so a crafted value either overflows the shift (undefined behaviour) or yields a block size far larger than CONFIG_EXT2_MAX_BLOCK_SIZE. That block size is then passed to k_mem_slab_init() by ext2_init_blocks_slab() to carve CONFIG_EXT2_MAX_BLOCK_COUNT blocks out of the fixed static buffer __ext2_block_memory_buffer, whose size is CONFIG_EXT2_MAX_BLOCK_COUNT * CONFIG_EXT2_MAX_BLOCK_SIZE. k_mem_slab_init() does not verify that the requested blocks fit the buffer, and the ext2 wrapper discards its return value, so the slab is laid out past the end of the static buffer. The mount immediately reads block-group, bitmap and inode blocks of fs->block_size bytes each into these slab blocks, producing an out-of-bounds write into adjacent static memory on the first block read. The entire path is gated only by data read from the mounted image, making this reachable by any attacker who can present a crafted ext2 image to a device that mounts it (for example a removable SD card or storage medium). Because the ext2 driver runs in kernel mode, supplying image bytes yields a supervisor-mode memory-corruption primitive, with impact ranging from denial of service to potential code execution. The fix rejects s_log_block_size values that overflow the shift (greater than 11) or that produce a block size exceeding CONFIG_EXT2_MAX_BLOCK_SIZE, so the block slab can no longer be initialized larger than its backing buffer.

zephyrproject zephyr

The userspace syscall verifier z_vrfy_mbox_send() in drivers/mbox/mbox_handlers.c validated the nested msg->data/msg->size fields by reading them directly out of live userspace memory, and then forwarded the original, still-mutable userspace struct mbox_msg * pointer to z_impl_mbox_send() and the underlying driver. Between the access check and the driver's use of msg->data, the validated pointer could be replaced, leaving a time-of-check/time-of-use window. On a system built with CONFIG_USERSPACE, any unprivileged userspace thread may invoke the mbox_send() system call. A second thread sharing the caller's address space can race to overwrite msg->data with a supervisor (kernel) address after the verifier's bounds check has passed but before the driver dereferences it. The driver then reads from the attacker-chosen address in supervisor context (for example memcpy(&data32, msg->data, msg->size) in the NXP mailbox driver, whose bytes are subsequently emitted to the peer mailbox endpoint). The impact is a userspace-to-supervisor access-control bypass: disclosure of kernel memory contents (high confidentiality impact), or, for an invalid/unmapped target address, a faulting kernel read causing denial of service. The fix snapshots the entire struct mbox_msg into a kernel-stack copy with k_usermode_from_copy() and validates and forwards that immutable copy, closing the race.

RARgames 4gaBoards

4gaBoards is a boards system for realtime project management. Prior to 3.3.9, 4gaBoards allows any authenticated user to enumerate account information for every user through GET /api/users and retrieve arbitrary accounts through GET /api/users/:id. The users/index and users/show actions rely only on the default is-authenticated policy in server/config/policies.js, and server/api/controllers/users/index.js returns the result of sails.helpers.users.getMany() without requester-specific authorization or response sanitization. Responses expose email, phone, organization, name, isAdmin, ssoGoogleEmail, ssoGithubEmail, and other SSO-linked email fields, including data for administrators. This enables instance-wide user enumeration, privacy loss, and targeted phishing reconnaissance. This issue is fixed in version 3.3.9.

zephyrproject zephyr

The Sierra Wireless HL7800 cellular modem driver (drivers/modem/vendor_standalone/hl7800.c, located at drivers/modem/hl7800.c in v4.4.0 and earlier) parses AT responses with roughly twenty handlers that call net_buf_linearize(value, sizeof(value), *buf, 0, len) into a 128-byte stack buffer and then write value[out_len] = 0. Because net_buf_linearize() (lib/net_buf/buf.c) can return a count equal to its destination-length argument, a field that exactly fills the buffer makes the terminating NUL land one byte past the end, a single-byte out-of-bounds write into adjacent stack memory. The +KCELLMEAS cell-measurement handler on_cmd_atcmdinfo_rssi() is worse: it passed the wire length len as the destination size (net_buf_linearize(value, len, *buf, 0, len)), so a response line longer than 128 bytes overflows the value stack buffer with attacker-influenceable content. The line length comes from net_buf_findcrlf(), which accumulates bytes across the whole net_buf fragment chain and is not bounded to 128, so an over-long line reaches the defect. The data originates from the cellular modem over UART, driven by the network: operator-scan results, +CGCONTRDP IP/DNS info, socket indications, and +KCELLMEAS neighbour-cell reports. An attacker able to shape what the modem emits — a rogue base station, a compromised modem baseband, or a remote peer feeding oversized response framing — can drive a line past 128 bytes. The handlers run in the driver's RX thread in kernel context, so the corruption is kernel-side. The +KCELLMEAS path is a full stack buffer overflow whose worst case is code execution in kernel context and whose floor is a reliable crash; the remaining sites are single-byte NUL out-of-bounds writes. Exploitation requires the modem to emit an over-long AT response line, giving high attack complexity over an adjacent (cellular radio) vector. The fix passes sizeof(dst) - 1 (and correct explicit bounds for the IMSI and +KCELLMEAS sites) so the terminator always stays in bounds.

zephyrproject zephyr

The USB device-side CDC NCM class control-to-host handler usbd_cdc_ncm_cth in subsys/usb/device_next/class/usbd_cdc_ncm.c builds a fixed-size response for the GET_NTB_PARAMETERS (28-byte struct ntb_parameters) and GET_NTB_INPUT_SIZE (8-byte struct ntb_input_size) class requests and copies the whole structure into the control DATA IN buffer with net_buf_add_mem(buf, ..., sizeof(...)), ignoring the host-supplied wLength. The control DATA IN buffer is allocated by the USB stack with a capacity of exactly wLength bytes (usbd_ep_ctrl_data_in_alloc -> udc_ctrl_data_alloc -> net_buf_alloc_len(&udc_ep_pool, wLength); no round-up is applied for the IN endpoint). Because net_buf_add_mem/net_buf_simple_add only bounds the copy with an __ASSERT_NO_MSG, which is compiled out in production builds, a host that issues one of these standard CDC NCM control requests with a wLength smaller than the response structure (e.g. wLength = 1) causes the handler to memcpy up to 27 bytes past the end of the allocated pool buffer. The request fields come straight from the USB SETUP packet, so any host (or USB interposer) the Zephyr device enumerates against can trigger the overflow with no authentication once an image built with the device_next USB stack and the CDC NCM class is connected. The out-of-bounds write corrupts adjacent allocations and metadata in the shared udc_ep_pool, primarily causing memory corruption and denial of service of the USB stack; the overflow length is bounded (<= 27 bytes) and the written content is fixed device constants, and the bug reads nothing back so there is no information disclosure. The fix clamps the copy with MIN(sizeof(...), setup->wLength), matching the existing CDC ACM handler.

djangoproject Django

An issue was discovered in Django 5.2 before 5.2.17 and 6.0 before 6.0.8. `django.contrib.admin.utils.display_for_field()` renders `URLField` values as clickable links in the admin without validating the URL. A value stored with an unsafe scheme is displayed as a link on changelist and read-only admin pages, which allows cross-site scripting against staff users who click the link. Exploitation requires the unsafe value to already be stored in the database. `URLField` validation through a `ModelForm` or the admin rejects unsafe schemes, so this affects applications that persist `URLField` data without running model validation, for example through direct queryset writes, deserialization, or bulk import of untrusted input. Django would like to thank Egor Saltykov for reporting this issue.

zephyrproject zephyr

The Bluetooth host ATT layer (subsys/bluetooth/host/att.c) associates each in-flight ATT TX buffer with its owning channel via the static tx_meta_data_storage[] array (data->att_chan = chan). When a buffer's last reference is dropped, its net-buf destroy callback defers the completion handling to the system workqueue (att_tx_destroy -> att_tx_destroy_work_handler -> att_on_sent_cb -> bt_att_sent), where bt_att_sent dereferences the channel and its ATT context (sys_slist_get(&att->reqs)). When a peer disconnects while an ATT PDU (a server notification/indication or any response) is still in flight in the controller TX path, L2CAP tears the channel down in l2cap_chan_del(): it runs the disconnected callback and then the released callback (bt_att_released), which frees the channel slab slot. Because the in-flight buffer is held by the connection TX path rather than the channel's own queue, its deferred destroy work can run after the channel has been freed. The att_on_sent_cb guard intended to drop the stale callback itself dereferences meta->att_chan, which is now a dangling pointer into a freed (and possibly reused) slab slot. A remote peer with an ATT connection can drive this by disconnecting during routine ATT traffic; no pairing or user interaction is required to reach the ATT bearer. The result is a use-after-free read/write of freed channel memory, reliably crashing the Bluetooth host (denial of service) and, because the channel slab slot may be reused, potentially corrupting live memory. The fix makes bt_att_released() NULL the att_chan field of every tx_meta_data_storage[] entry still referencing the channel before freeing it, so the deferred guard observes a NULL pointer and drops the callback. Teardown and the destroy work both run on the cooperative system workqueue, so the array update is serialized and needs no lock.

Taskbuilder – Project Management & Task Management Tool With Kanban Board

The Taskbuilder – Project Management & Task Management Tool With Kanban Board plugin for WordPress is vulnerable to SQL Injection via the 'wppm_proj_filter' parameter in versions up to, and including, 5.0.9. This is due to insufficient escaping on the user-supplied parameter and the lack of sufficient preparation on the existing SQL query — the value is re-read at line 144 using only sanitize_text_field() (overwriting the earlier absint() result), then concatenated into the SQL WHERE clause as an unquoted numeric operand using only esc_sql(), which does not protect against injection in that context, and finally string-interpolated into the $wpdb->prepare() format string, bypassing parameterization entirely. This makes it possible for authenticated attackers, with subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.

zephyrproject zephyr

The DesignWare SPI driver (drivers/spi/spi_dw.c) computed the SPI BAUDR clock divider as info->clock_frequency / config->frequency without validating config->frequency. spi_transceive is a Zephyr __syscall and its verify handler (drivers/spi/spi_handlers.c) copies the caller-supplied spi_config from userspace without checking the frequency field, so a userspace thread that has been granted access to a DesignWare SPI device kernel object can pass frequency = 0 and trigger an unsigned integer divide-by-zero in spi_dw_configure(). On Cortex-M Mainline (SCB->CCR.DIV_0_TRP is set in z_arm_fault_init()) and on ARC (a dedicated __ev_div_zero vector) this raises a CPU exception, resulting in a kernel fault and local denial of service. The fix rejects zero frequency and frequencies above clock_frequency / 2 (the DesignWare SSI databook minimum SCKDIV of 2) with -EINVAL. The defect affects all Zephyr releases up to and including v4.4.0; exploitation requires CONFIG_USERSPACE=y and an unprivileged thread already granted SPI driver permission. There is no memory-corruption or information-disclosure impact.

mjperpinosa stumasy

A weakness has been identified in mjperpinosa stumasy up to 327d1b0f2915ba79d7ef8ebb74553e987609d9be. The impacted element is the function Notes_controller::search_scratch_data of the file application/PHP/objects/notes/search_scratch_data.php. This manipulation of the argument field_name causes sql injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet.

teableio teable

Teable before 2026-06-15T04-43-24Z.1912 contains an improper access control vulnerability that allows anonymous attackers to access hidden field data by supplying arbitrary field IDs in the projection parameter of the share view records endpoint. Attackers can enumerate hidden field IDs from share metadata and specify them in projection parameters to read field values that are intended to be restricted from public view.

zephyrproject zephyr

The Zephyr Bluetooth LE Audio Basic Audio Profile (BAP) unicast client mishandles peer-supplied ASE state notifications. In unicast_client_ep_qos_state() (subsys/bluetooth/audio/bap_unicast_client.c), the handler writes attacker-controlled QoS fields (interval, framing, phy, sdu, rtn, latency, pd) through the stream->qos pointer with only a stream != NULL guard. stream->qos is NULL for any stream that has been codec-configured via bt_bap_stream_config() but not yet added to a unicast group (it is set only by unicast_group_add_stream()). A malicious or buggy remote ASCS server, to which the local device is connected as a BAP unicast client, can send a GATT notification announcing the ASE has entered the QoS Configured state while the local endpoint is still in the Codec Configured state — a transition the dispatcher explicitly permits — during that window, causing a write through a NULL pointer and a crash (denial of service). The data written is itself remote-controlled. The defect shipped in v4.3.0 and v4.4.0 (and earlier). The fix re-points all BAP QoS storage to the always-valid embedded ep->qos struct, eliminating the NULL dereference.

protobufjs protobuf.js · Protobufjs project protobufjs

protobufjs compiles protobuf definitions into JavaScript (JS) functions. From 8.2.0 to 8.4.2, protobufjs preserved unknown wire elements in message.$unknowns and did not provide a decode-time option to discard unknown fields before retaining them. A crafted protobuf payload containing many unknown fields could therefore cause a decoded message to retain substantially more memory than the input size would suggest, even when unknown-field round-tripping is not needed. protobufjs 8.5.0 added the relevant decode-time options, allowing applications that decode untrusted protobuf data to disable unknown-field retention during decode. protobufjs 8.6.2 flips the default so unknown fields are discarded unless explicitly opted into.

protobufjs protobuf.js · Protobufjs project protobufjs · Protobufjs project protobufjs-cli

protobufjs compiles protobuf definitions into JavaScript (JS) functions. Prior to 8.6.0 and 7.6.3, protobufjs accepted certain schema-derived names that could collide with properties used by protobufjs runtime helpers. The known affected names are fields named hasOwnProperty, field or oneof names such as $type when loaded through protobufjs JSON/reflection descriptors, and service methods whose generated helper name is rpcCall. When affected message or service types were used, protobufjs could read schema-controlled data where it expected an own-property helper, reflected type metadata, or the base RPC helper. This could cause deterministic exceptions or recursive calls in affected decode post-checks, verification, object conversion, reflected JSON serialization, or protobufjs RPC helper invocation. This vulnerability is fixed in 8.6.0 and 7.6.3.

pgadmin.org pgAdmin 4 · Pgadmin pgadmin 4

HTML injection in pgAdmin 4's cloud deployment module. The verify_credentials, deploy, regions, and update-server endpoints under /rds/, /azure/, /google/, and the top-level /cloud/ blueprint propagated AWS / Azure / Google SDK exception text — and the related file-resolution and database-commit exception text — into the JSON response body (the info and errormsg fields) without HTML-encoding. The Cloud Wizard frontend rendered these strings through html-react-parser, so an attacker-influenced exception message embedded structural HTML directly into the wizard's DOM. The reported entry point is /rds/verify_credentials/. An authenticated pgAdmin user submits a crafted access_key whose value contains an <iframe/src=...> payload; AWS STS rejects the credential with an IncompleteSignature exception whose text quotes the access_key verbatim; the pgAdmin backend forwards that text into the JSON info field; the Cloud Wizard's FormFooterMessage parses it as HTML. The browser fetches the iframe's src from an attacker-controlled host, and JavaScript executing inside the cross-origin iframe writes to parent.location, redirecting the victim's pgAdmin tab. Because the injection renders inside pgAdmin's own interface, X-Frame-Options and Content-Security-Policy frame-ancestors do not mitigate it. Baseline impact is self-targeted (the same user who supplied the payload sees the injection); escalation against other authenticated users requires an additional cross-site request-forgery primitive capable of submitting the malformed credential request with a valid X-pgA-CSRFToken in the victim's browser context. The same unsanitised-error-into-JSON pattern was present across multiple sibling endpoints — Azure's check_cluster_name_availability, every Google endpoint that surfaces SDK errors (verification_ack, projects, regions, instance_types, database_versions, the verify_credentials path-resolution branches), the central /deploy endpoint that bubbles str(e) from deploy_on_rds / deploy_on_azure / deploy_on_google, and update_cloud_server which surfaces the str(e) from a failing db.session.commit — all of which are now covered. Fix HTML-escapes every external/SDK exception string at the endpoint sink via a new shared sanitize_external_text helper (HTML escape with control-character strip), promoted out of the psycopg3 driver into web/pgadmin/utils/text_sanitize.py. The Cloud Wizard frontend additionally renders its FormFooterMessage in plain-text mode for backend-derived strings, so the value is never parsed as HTML even if a future sink forgets the escape. This issue affects pgAdmin 4: from 6.6 before 9.16.

misp · Misp-project misp

A vulnerability in the MISP dashboard widgets allowed an authenticated user to manipulate the fields option and influence which fields were returned by the New Users and New Organisations widgets. In some cases, requesting a field set that became empty after validation or redaction could cause the underlying query to fall back to returning unintended model fields. For the New Users widget, this could allow a non-site-admin user to obtain user e-mail addresses even when user e-mail disclosure was disabled by configuration. For the New Organisations widget, crafted field selection could similarly result in unintended organisation fields being included in the dashboard response. The issue was caused by applying field filtering and redaction in a way that could leave the selected field list empty. The patch ensures that the allowed field list is built safely, that restricted fields such as user e-mail addresses are removed before user-supplied field selection is processed, and that an empty field selection falls back only to the permitted default fields. Impact: An authenticated low-privileged user with access to the affected dashboard widgets may be able to disclose restricted user or organisation metadata, including user e-mail addresses depending on configuration.

A stored Cross-Site Scripting (XSS) vulnerability exists in the project selector component of Mautic 7. When rendering selection menus for associating projects with system entities, the application fails to sanitize project names returned via AJAX before injecting them into the DOM as option fields. An authenticated user with permissions to create projects can exploit this to store a malicious script payload in the project's name. When another administrative user subsequently opens an entity editor containing the project selector, the injected script executes within the context of their active browser session. This could allow an attacker to hijack the session, perform unauthorized state coordination, or access organizational data within the dashboard.

Drupal Simple Hierarchical Select (shs) · Simple hierarchical select project simple hierarchical select

Simple Hierarchical Select (SHS) for Drupal 7 contains cross-site scripting risk due to improper output escaping of term-derived text. Confirmed affected paths include field formatter output (shs_field_formatter_view) and term-tree child-term data generation (shs_term_get_children). Malicious taxonomy term names can be rendered unsafely depending on output context. This affects versions from 7.x-1.0 through (and including) 7.x-1.10.

mlflow/mlflow · Lfprojects mlflow

In mlflow/mlflow versions up to 3.9.0, the `SearchModelVersions` REST API endpoint and the `mlflowSearchModelVersions` GraphQL query lack proper per-model authorization checks when basic authentication is enabled. This allows any authenticated user to enumerate all model versions across all registered models, regardless of their permission level. The issue arises due to the absence of `SearchModelVersions` in the `BEFORE_REQUEST_VALIDATORS` and `AFTER_REQUEST_HANDLERS` for the REST API, and its omission from `GraphQLAuthorizationMiddleware.PROTECTED_FIELDS` for GraphQL. This vulnerability can expose sensitive information such as model names, version descriptions, source URIs, tags, and other metadata, potentially revealing proprietary or confidential details in multi-tenant environments. The issue is resolved in version 3.10.0.

makeplane plane · Plane plane

Plane is an open-source project management tool. In versions 1.3.0 and below, SavedAnalyticEndpoint passes the user-controlled segment query parameter directly to a Django F() expression without validation (unlike the regular AnalyticsEndpoint, which checks against an allowlist), causing ORM Field Reference Injection. An authenticated workspace MEMBER can send GET /api/workspaces/<slug>/saved-analytic-view/<analytic_id>/ with a crafted segment value that is forwarded into build_graph_plot() and traverses foreign-key relationships (e.g. workspace__owner__password) before being projected via .values("dimension", "segment"), returning the referenced field values directly in the JSON response. This exposes sensitive data such as bcrypt password hashes, API tokens, and related users' email addresses, making it a stronger primitive than the related order_by injection where values are only leaked through ordering. This issue has been fixed in version 1.3.1.

mantisbt

Mantis Bug Tracker (MantisBT) is an open source issue tracker. Versions 2.28.1 and below contain flawed logic that causes improper escaping of a textarea custom field's contents in the Update Issue page, (bug_update_page.php) allowing an attacker to inject HTML and, if CSP settings permit, execute arbitrary JavaScript when the page is loaded. This facilitates session theft, leading to admin account takeover, full project data access. In order to exploit this issue, a textarea-type custom field must be configured for the project, the attack must be carried out by an authenticated user with bug report permission (low privilege). This can affect any user viewing the bug edit form, including administrators. The issue has been fixed in version 2.28.2. If users cannot immediately upgrade, they can work around the issue by using the default Content-Security Policy, which blocks script execution.

misp · Misp-project misp

A vulnerability was identified in the ShadowAttribute proposal creation workflow. The add action accepted user-controlled ShadowAttribute request data without removing the id field before saving the record. Because the underlying framework treats a supplied primary key as an instruction to update an existing record, an authenticated user able to submit shadow attribute proposals could provide the identifier of an existing ShadowAttribute and cause that record to be updated instead of creating a new proposal. This can result in unauthorized modification of existing shadow attributes, potentially affecting proposals associated with events the user should not be able to alter. Depending on deployment configuration and accessible API responses, the issue may also expose or move proposal data across event contexts. The vulnerability is caused by trusting a client-supplied primary key during object creation. The fix removes the id field from incoming ShadowAttribute data before processing, ensuring that the endpoint always creates a new proposal rather than updating an existing one. This has been fixed in MISP 2.5.38.

MISP · Misp-project misp

MISP is an open source threat intelligence and sharing platform. Prior to 2.5.37, a SQL injection vulnerability existed in the handling of user-controlled ordering parameters in the event and shadow attribute listing endpoints. The affected code accepted order or sort values from request parameters and incorporated them into database query ordering clauses without sufficient validation of the requested field name. An attacker with access to the affected endpoints could craft a malicious ordering parameter to manipulate the generated SQL query. Depending on database permissions and query context, this could potentially allow unauthorized access to data, modification of query behavior, or other database-level impact. This vulnerability is fixed in 2.5.37.