Recherche « Continue continue »

Linux

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Use active memslots for the per-vCPU MMIO cache KVM tags the per-vCPU MMIO cache with a memslot generation so that a memslot update invalidates cached MMIO information. Both the fill and validation paths use kvm_memslots(), which unconditionally selects address space 0, even when the vCPU is running in SMM and using address space 1. Commit 56f17dd3fbc4 ("kvm: x86: fix stale mmio cache bug") added the memslot generation to the cache key so that a memslot update could not leave a stale entry valid. When commit 699023e23965 ("KVM: x86: add SMM to the MMU role, support SMRAM address space") added the SMM address space, these helpers were not converted to use the active memslots. Consequently, an update to the SMM memslots can leave an entry from the old SMM address space apparently valid after the vCPU returns to the normal address space. A guest can then cause an access to valid RAM at the same GFN to be returned to userspace as KVM_EXIT_MMIO. Completing that exit through the VMM's RAM address space writes the backing page without going through KVM's write-tracking path. If the page backs a nested EPT table, KVM can continue using shadow translations derived from the old contents. The WARN_ON_ONCE() in kvm_mmu_write_protect_fault() catches this invalid cache and memslot combination. Use the vCPU's active memslots when caching and validating the entry. Memslot generations are unique across address spaces, so the generation also distinguishes the normal and SMM views. This matches the MMIO SPTE cache, which already uses kvm_vcpu_memslots(). On an unpatched current-mainline kernel, a regression test that fills the cache in SMM and updates only the SMM memslots fails the intended RAM write and triggers the kvm_mmu_write_protect_fault() warning. With this change, the same test completes the RAM write without a warning. The x86/smm_test, set_memory_region_test, and memslot_modification_stress_test selftests also pass.

Linux

In the Linux kernel, the following vulnerability has been resolved: mmc: mtk-sd: Cancel request timeout work on remove The driver queues req_timeout while a request is active. msdc_request_done() uses cancel_delayed_work(), which does not wait for a timeout callback that has already started. The timeout callback calls mmc_request_done(), which wakes the request waiter, and then continues to use host->dev_comp and check the SDIO IRQ. During unbind, msdc_drv_remove() can return and the managed mmc_host can be freed before the callback finishes. KASAN reported use-after-free accesses in msdc_request_done() and msdc_recheck_sdio_irq() in each of three unbind tests. The same tests completed without a kernel diagnostic after this change. Call cancel_delayed_work_sync() after mmc_remove_host() has stopped new requests and before the driver releases the host resources.

Linux

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix self-redirect copied_seq double-counting When a BPF stream_verdict program redirects an skb back to the same socket (self-redirect with BPF_F_INGRESS), sk_psock_verdict_apply() calls tcp_eat_skb() which advances tcp_sk->copied_seq. However, the skb is then delivered to the socket's psock ingress queue and later read by tcp_bpf_recvmsg_parser(), which also advances copied_seq via the copied_from_self accounting path. This double-counting causes copied_seq to advance by 2x the actual data length, triggering: TCP recvmsg seq # bug 2: copied BF2E806, seq BF2E7FD, \ rcvnxt BF2E806, fl 0 WARNING: net/ipv4/tcp.c:2745 at tcp_recvmsg_locked+0x72b/0x2640 Call Trace: tcp_recvmsg+0x10a/0x500 sock_recvmsg+0x168/0x1d0 __sys_recvfrom+0x19a/0x2a0 __x64_sys_recvfrom+0xe4/0x1f0 do_syscall_64+0xf7/0x530 entry_SYSCALL_64_after_hwframe+0x77/0x7f cleanup rbuf bug: copied BF2E806 seq BF2E806 rcvnxt BF2E806 WARNING: net/ipv4/tcp.c:1609 at tcp_cleanup_rbuf+0xf2/0x1c0 Call Trace: tcp_recvmsg_locked+0x8d1/0x2640 tcp_recvmsg+0x10a/0x500 sock_recvmsg+0x168/0x1d0 __sys_recvfrom+0x19a/0x2a0 __x64_sys_recvfrom+0xe4/0x1f0 do_syscall_64+0xf7/0x530 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by converting self-redirect verdict to __SK_PASS at the beginning of sk_psock_verdict_apply(). This bypasses the __SK_REDIRECT case entirely (which calls sk_psock_eat_skb), letting the __SK_PASS path queue the skb to the psock ingress queue. The data is then read via tcp_bpf_recvmsg_parser(), which advances copied_seq exactly once through copied_from_self. Cross-socket redirects continue through __SK_REDIRECT with sk_psock_eat_skb() unchanged.

Apache Software Foundation Apache bRPC

A heap use-after-free in the RTMP protocol component of Apache bRPC (versions < 1.18.0) allows a remote attacker to crash a bRPC RTMP server by sending a crafted Abort control message. No authentication or application-level request is required. Root Cause: When an RTMP Abort control message names the chunk stream that is currently being parsed (the chunk stream carrying the message itself), RtmpChunkStream::OnAbortMessage calls RtmpContext::ClearChunkStream, which deletes the RtmpChunkStream while its Feed() is still running. After the message handler returns, Feed() continues to access members of the deleted object, resulting in a heap-use-after-free. Affected Scenarios: bRPC servers that enable RTMP support (ServerOptions.rtmp_service set) and accept connections from untrusted networks. How to Fix: 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch:  https://github.com/apache/brpc/pull/3452 The fix skips clearing the chunk stream when the Abort message targets the chunk stream that is currently being parsed.

Apache Software Foundation Apache bRPC

The Redis server command parser in Apache bRPC accepts an empty RESP array as a command header. A remote unauthenticated attacker who can reach a bRPC server with Redis service enabled can send an empty array header followed by a bulk string, causing an out-of-bounds write in the parser and crashing the process. Root Cause: RedisCommandParser::ConsumeImpl rejected negative RESP array counts but accepted zero. It resized the command argument vector to zero elements and continued parsing. When a following bulk string was parsed, the only index guard was a CHECK. In configurations where fatal logs do not abort immediately, execution could continue and write to _args[0] even though the vector was empty. Affected Scenarios: Deployments that enable ServerOptions.redis_service and accept Redis protocol traffic from untrusted clients. The issue is reached during parsing before command handling or authentication. How to Fix: 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3354 Note: The fix rejects empty RESP arrays as invalid Redis commands and replaces the internal index CHECK with an explicit parse error so malformed command streams cannot fall through to an indexed vector write.

curl

An `ftp://` transfer configured with `CURLUSESSL_NONE` can reuse a pooled FTP control connection that a previous easy handle upgraded with `STARTTLS` and authenticated using a client certificate. The second handle performs neither a new TLS handshake nor a new FTP login, so the server continues to authorize it under the first handle's certificate identity.

Apache Software Foundation Apache Tomcat

Not Failing Securely ('Failing Open') vulnerability in Apache Tomcat. If the OpenSSLLifecycleListener is configured to use FIPS mode but FIPS activation fails, Tomcat logs and error but continues to use JSSE in non-FIPS mode with the provided configuration. This issue affects Apache Tomcat: from 11.0.0-M14 through 11.0.26, from 10.1.22 through 10.1.60, from 9.0.92 through 9.0.122. Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fix the issue.

Apache Software Foundation Apache Answer

Insufficient session expiration vulnerability in Apache Answer. This issue affects Apache Answer: through 2.0.2. Insufficient session invalidation allowed revoked users to continue accessing known private uploaded files with a stale visit token. Users are recommended to upgrade to version 2.0.3, which fixes the issue.

Linux

In the Linux kernel, the following vulnerability has been resolved: ipvs: bound LBLCR and LBLC cache growth ip_vs_lblcr_new() and ip_vs_lblc_new() create cache entries for every previously unseen destination address. The table max_size only tells the periodic collector to reclaim entries after the cache has already exceeded the limit. It does not reclaim entries that the attacker continues to use. Reject new cache entries once either table reaches max_size * 3 / 2. The extra headroom lets the periodic collector catch up while the existing scheduler fallback continues to use the selected destination when cache creation fails. New traffic therefore stays serviceable without growing the tables further.

Linux

In the Linux kernel, the following vulnerability has been resolved: kprobes: Skip disarmed probes when checking optkprobe overlap On x86, an optkprobe at A replaces five bytes with a jump. If a disabled probe B is at A+2, get_optimized_kprobe() stops at B when arming a new probe C at A+4. It leaves A optimized: A A+1 A+2 A+3 A+4 A's jump | e9 | d0 | d1 | d2 | d3 | after C | e9 | d0 | d1 | d2 | cc | The INT3 for C overwrites the last byte of A's jump displacement, so execution can jump to the wrong address. B can have prepared optinsns while disarmed, but has no jump to unoptimize. Continue past disarmed and unprepared probes to find the active optimized probe before arming a probe in its jump.

Linux

In the Linux kernel, the following vulnerability has been resolved: sctp: check RCV_SHUTDOWN after the sendmsg connect wait sctp_wait_for_connect() drops the socket lock while it sleeps. An out-of-the-blue ABORT can then be processed from the socket backlog and unlink the association. If a concurrent shutdown(fd, SHUT_RD) sets RCV_SHUTDOWN, the waiter breaks with err == 0 before checking asoc->base.dead. Its final sctp_association_put() can then free the association, leaving sctp_sendmsg_to_asoc() to continue with a dangling pointer. Check RCV_SHUTDOWN along with the wait error in sctp_sendmsg_to_asoc() before using the association again. The check only accesses the socket, so it needs no additional association reference. Return the existing -ESRCH so that sctp_sendmsg() skips freeing a new association that may already have been destroyed. Keep sctp_wait_for_connect() unchanged to preserve its behavior for the connect() caller.

Linux

In the Linux kernel, the following vulnerability has been resolved: mtd: core: avoid double-free of OTP NVMEM device If factory OTP setup fails after the user OTP NVMEM device has been registered, mtd_otp_nvmem_add() unregisters the user device but leaves mtd->otp_user_nvmem set. On an error, the caller unregisters it again. For -EOPNOTSUPP, registration continues and normal teardown unregisters it again. Clear mtd->otp_user_nvmem after unregistering it.

Linux

In the Linux kernel, the following vulnerability has been resolved: perf: Fix race between perf_event_exit_task() and perf_pending_task() A race condition exists between perf_event_exit_task() and perf_pending_task() during begin_new_exec(). During begin_new_exec(), perf_event_exit_task() may be called, and the PF_EXITING flag is not set on task. So perf_sigtrap() continues to execute and triggers WARN_ON_ONCE(event->ctx->task != current). Since both task exit and exec paths can call perf_event_exit_task() which sets ctx->task to TASK_TOMBSTONE, fix this by explicitly checking if event->ctx->task equals TASK_TOMBSTONE and dropping the redundant PF_EXITING check.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: check dc_state_create_copy() for NULL in dm_suspend dc_state_create_copy() can return NULL on allocation failure. dm_suspend() only conditionally skips dm_gpureset_toggle_interrupts() and continues execution, returning success. dm_resume() then dereferences the NULL cached_dc_state in link_enc_cfg_copy() and the following dc_state->stream_count loop, crashing during GPU reset recovery. Return -ENOMEM immediately if the copy fails, so the caller aborts suspend instead of leaving a NULL cached state for resume. (cherry picked from commit 84b6d7932fdd2857795a257f9f258562a3cddcab)

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix IP instance memory leak on kobject add failure amdgpu_discovery_sysfs_ips() allocates ip_hw_instance with kzalloc_flex() and initializes its embedded kobject before calling kobject_add(). If kobject_add() fails, the return value is ignored and execution continues without dropping the initial kobject reference. The failed kobject is not retained in the kset list, so the normal sysfs teardown path cannot find it. As a result, ip_hw_instance_release() is never called and the ip_hw_instance allocation is leaked. Call kobject_put() when kobject_add() fails so the initial reference is dropped and ip_hw_instance_release() can free the allocation. Keep the existing best-effort sysfs behavior by continuing with the remaining IP entries after the failed registration. The issue was identified by a static analysis tool I developed and confirmed by manual review. (cherry picked from commit 5c75fbcca8af1096d8d9415b91d8ea6212c22ee1)

Linux

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Serialize SMP remote OOB data access build_pairing_cmd() looks up remote OOB data and copies its contents without holding hdev->lock, which serializes the list's writers. After SMP finds an entry, a concurrent management Remove Remote OOB Data command can unlink and free it before SMP reads its present flag or copies its random and confirmation values. Removal can also invalidate an entry while the lookup is still traversing the list. KASAN reported: BUG: KASAN: slab-use-after-free in build_pairing_cmd+0x948/0x9b0 Call Trace: build_pairing_cmd+0x948/0x9b0 smp_recv_cb+0x459f/0x8110 l2cap_recv_frame+0xf14/0x9190 l2cap_recv_acldata+0xa64/0xd40 hci_rx_work+0x4ca/0x730 Allocated by task 87: hci_add_remote_oob_data+0x11d/0x530 add_remote_oob_data+0x282/0x400 hci_sock_sendmsg+0x1033/0x1ea0 Freed by task 93: hci_remote_oob_data_clear+0x108/0x1c0 remove_remote_oob_data+0x198/0x220 hci_sock_sendmsg+0x1033/0x1ea0 Taking hdev->lock in build_pairing_cmd() would recurse for callers that already hold it and invert the device-to-L2CAP lock order on the receive path. Add a per-device remote_oob_lock instead, held across the SMP lookup and copies and by the add, remove and clear helpers. Cover initialization and in-place updates as well, so SMP cannot read partially initialized or updated OOB values. Release the mutex on allocation failure, preserving the existing error return. The new critical sections acquire no device, connection or channel locks. Writers retain their existing hdev->lock protection, which continues to serialize the other readers without changing their locking or behavior.

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reject invalid 320 MHz CSA bandwidth The HT/VHT channel definition validator can receive a 320 MHz bandwidth indication from a received CSA frame on a non-6 GHz link. It warns for this unsupported width but continues with an uninitialized vht_operation.chan_width, which is then read by ieee80211_chandef_vht_oper(). With panic_on_warn enabled, this lets a received frame panic the kernel. Reject the channel definition before entering the VHT operation conversion. This preserves the existing CSA fallback while avoiding both the warning and the uninitialized read.

Linux

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix divide-by-zero in btf_struct_walk() When an access goes past the struct and the last member is a flexible array, btf_struct_walk() folds the offset back into a single element with (off - moff) % t->size, but never checks that the element type has a size. BTF takes an empty struct, so this in program BTF /* event could be empty */ struct event { #ifdef HAVE_TIMESTAMP __u64 ts; #endif }; struct batch { int nr; struct event events[]; }; divides by zero at prog load time. Getting there needs a PTR_TO_BTF_ID that is not MEM_ALLOC, e.g. a plain read of a local kptr stashed in a map from a sleepable program. Oops: divide error: 0000 [#1] SMP KASAN PTI RIP: 0010:btf_struct_walk+0x53f/0x1570 Call Trace: <TASK> btf_struct_access+0x42a/0xcd0 check_ptr_to_btf_access+0x4dc/0x1160 check_mem_access+0x3a45/0x8740 check_load_mem+0x36a/0xd10 do_check_common+0x3ef0/0xb210 bpf_check+0x6d3b/0x8580 bpf_prog_load+0xf7c/0x2720 __sys_bpf+0xa83/0x3690 __x64_sys_bpf+0xc7/0x150 x64_sys_call+0x1f3f/0x27e0 do_syscall_64+0xe5/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Reject a zero-sized element type. The fixed array path in the same function already bails out on the same thing: btf_struct_walk() ... /* skip empty array */ if (moff == mtrue_end) continue; msize /= total_nelems;

Linux

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF due to concurrent consumption of ttrace lists in alloc_bulk Syzkaller repeatedly triggered UAF splats related to nodes in waiting_for_gp_ttrace within the bpf memalloc: BUG: KASAN: slab-use-after-free in llist_del_first+0x85/0x110 lib/llist.c:61 Read of size 8 at addr ffff8881572cd080 by task syz.4.470/5112 ... llist_del_first+0x85/0x110 lib/llist.c:61 alloc_bulk+0x193/0x460 kernel/bpf/memalloc.c:229 bpf_mem_refill+0x386/0x560 kernel/bpf/memalloc.c:436 Freed by task 14: ... __free_rcu kernel/bpf/memalloc.c:281 [inline] __free_rcu_tasks_trace+0x48/0xd0 kernel/bpf/memalloc.c:291 rcu_tasks_invoke_cbs+0x1ec/0x3e0 kernel/rcu/tasks.h:571 rcu_tasks_one_gp+0x13d/0x220 kernel/rcu/tasks.h:621 rcu_tasks_kthread+0xf3/0x120 kernel/rcu/tasks.h:651 The reason is that the UAF occurs after the RCU Tasks Trace GP expires: when the __free_rcu() callback runs, there is no synchronization protecting llist_del_all() against concurrent alloc_bulk() operating on waiting_for_gp_ttrace, leading to the race condition below: CPU0 CPU1 __free_rcu (RCU Tasks Trace callback) alloc_bulk llist_del_first(&c->waiting_for_gp_ttrace) entry = smp_load_acquire(&head->first); do { if (entry == NULL) return NULL; free_all(llist_del_all(&c->waiting_for_gp_ttrace)) llist_for_each_safe(pos, t, llnode) free_one(pos); next = READ_ONCE(entry->next); <-- trigger UAF } while (!try_cmpxchg(&head->first, &entry, next)); In addition, there is also a theoretical race condition on the free_by_rcu_ttrace list. This race requires two preconditions: an in-flight Tasks Trace GP keeping c->call_rcu_ttrace_in_progress == 1, and concurrent cross-CPU frees repopulating c->free_by_rcu_ttrace with new nodes. Under these conditions, the following scenario triggers UAF: // CPU0 // irq work is still busy (on PREEMPT_RT) alloc_bulk() llist_del_first(&c->free_by_rcu_ttrace) entry = smp_load_acquire(&head->first); do { if (entry == NULL) return NULL; // CPU1 bpf_mem_alloc_destroy() WRITE_ONCE(c->draining, true) // wait for CPU0 irq_work_sync() // CPU2 do_call_rcu_ttrace(tgt(CPU0)) if (c->draining) { llist_del_all(&c->free_by_rcu_ttrace) free_all() } // CPU0 continue next = READ_ONCE(entry->next); <-- trigger UAF while (!try_cmpxchg(&head->first, &entry, next)); Fix this by introducing a raw spinlock to synchronize the concurrent consumption on waiting_for_gp_ttrace and free_by_rcu_ttrace.

Linux

In the Linux kernel, the following vulnerability has been resolved: bpf: Bound ownership depth through local kptrs and graph roots Program-allocated objects can own other local objects through referenced kptrs. bpf_obj_free_fields() follows those pointers through __bpf_obj_drop_impl() synchronously, before the object storage is freed through RCU. A self-referential local kptr type therefore permits arbitrarily deep object chains, and dropping the head can exhaust the kernel stack. Long acyclic type chains have the same problem. btf_check_and_fixup_fields() still assumes referenced kptrs only point to kernel types and checks ownership through list and rbtree roots only. Its existing rule is sufficient for graph-only cycles: the target of each graph edge must contain a node, so every type in a cycle has both a root and a node. The rule rejects such a type owning another root, breaking every cycle. It also limits graph-only chains to three types, or two if the first type contains a node, and conservatively rejects longer acyclic chains. The missing local-kptr edges, rather than a missed graph-only cycle, are the bug introduced by support for bpf_kptr_xchg() into local kptrs. Replace that restriction with one bounded ownership walk covering graph roots and local referenced kptrs. Run it after all BTF records have been fixed up, reject cycles and paths deeper than eight record-bearing types, and cache each type's suffix depth while checking it against the remaining budget. This also permits the longer acyclic graph-only layouts rejected by the old rule; update their existing BTF tests accordingly. Keep the bound independent of MAX_CALL_FRAMES because recursive destruction can run below a BPF call chain. A plain local pointee without special-field metadata adds only a final non-recursing drop. Non-owning kptrs and kernel-BTF kptrs do not recurse through local records and remain outside the walk. Include local percpu-kptr edges too, although allocation of percpu objects with special fields is currently forbidden, so that relaxing that restriction cannot bypass the ownership bound. btf_check_and_fixup_fields() continues to initialize graph_root.value_rec, including for separately allocated map records. The ownership relationships belong to immutable program BTF and only need validation at BTF load time.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Propagate map failures correctly from pvr_mmu_map_sgl() Map failure from pvr_mmu_map_sgl() interface was not returned correctly to pvr_mmu_map() interface. This resulted in pvr_mmu_map() interface to continue instead of returning an error to caller. Fix it by returning a proper error code from pvr_mmu_map_sgl() interface. Call stack for crash: [ 1179.286237] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [ 1179.295067] Mem abort info: [ 1179.297877] ESR = 0x0000000096000004 [ 1179.301656] EC = 0x25: DABT (current EL), IL = 32 bits [ 1179.306987] SET = 0, FnV = 0 [ 1179.310048] EA = 0, S1PTW = 0 [ 1179.313198] FSC = 0x04: level 0 translation fault [ 1179.318096] Data abort info: [ 1179.320993] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 1179.326483] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 1179.331546] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 1179.336895] user pgtable: 4k pages, 48-bit VAs, pgdp=000000009822a000 [ 1179.343402] [0000000000000008] pgd=0000000000000000, p4d=0000000000000000 [ 1179.350243] Internal error: Oops: 0000000096000004 [#2] SMP [ 1179.355908] Modules linked in: powervr gpu_sched drm_shmem_helper drm_gpuvm drm_exec xhci_plat_hcd xhci_hcd dwc3 usbcore usb_common snd_soc_simple_card snd_soc_simple_card_utils dwc3_am62 at24 sa2ul sha512 libsha512 sha256 authenc sch_fq_codel fuse dm_mod ipv6 [ 1179.378992] CPU: 1 UID: 1000 PID: 680 Comm: deqp-vk Tainted: G D 6.17.0 #1 PREEMPT [ 1179.388120] Tainted: [D]=DIE [ 1179.390994] Hardware name: Texas Instruments AM625 SK (DT) [ 1179.396467] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1179.403415] pc : pvr_mmu_op_context_unmap_curr_page+0x6c/0x134 [powervr] [ 1179.410140] lr : pvr_mmu_op_context_unmap_curr_page+0x58/0x134 [powervr] [ 1179.416848] sp : ffff8000839ab8c0 [ 1179.420153] x29: ffff8000839ab8c0 x28: 0000000000000001 x27: 000000008f386000 [ 1179.427283] x26: ffff000016d1df98 x25: 0000000000247000 x24: 00000000000001e6 [ 1179.434413] x23: 0000000000000002 x22: 000000000000ffff x21: 0000000000000247 [ 1179.441540] x20: 0000000000000245 x19: ffff000016d1df60 x18: 0000000000000002 [ 1179.448668] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000001 [ 1179.455793] x14: 0000000000060810 x13: ffff80007fffffff x12: ffff000004190480 [ 1179.462921] x11: ffff8000853f7000 x10: ffff8000811ae000 x9 : ffff0000041900b8 [ 1179.470051] x8 : 0000000000000000 x7 : 00000000990c4001 x6 : 0000000000000007 [ 1179.477177] x5 : ffff000016d1df60 x4 : 0000000000000000 x3 : ffff00000a7d8000 [ 1179.484306] x2 : 00000000000001ff x1 : 0000000000000000 x0 : 0000000000000000 [ 1179.491433] Call trace: [ 1179.493872] pvr_mmu_op_context_unmap_curr_page+0x6c/0x134 [powervr] (P) [ 1179.500582] pvr_mmu_map+0x31c/0x388 [powervr] [ 1179.505027] pvr_vm_gpuva_map+0x40/0x88 [powervr] [ 1179.509732] __drm_gpuvm_sm_map+0x250/0x44c [drm_gpuvm] [ 1179.514952] drm_gpuvm_sm_map+0x48/0x5c [drm_gpuvm] [ 1179.519822] pvr_vm_bind_op_exec+0x64/0x70 [powervr] [ 1179.524785] pvr_vm_map+0x1f8/0x2a8 [powervr] [ 1179.529142] pvr_ioctl_vm_map+0x12c/0x188 [powervr] [ 1179.534018] drm_ioctl_kernel+0xb8/0x128 [ 1179.537941] drm_ioctl+0x21c/0x4ec [ 1179.541337] __arm64_sys_ioctl+0xac/0x108 [ 1179.545344] invoke_syscall+0x44/0x100 [ 1179.549091] el0_svc_common.constprop.0+0x40/0xe0 [ 1179.553790] do_el0_svc+0x1c/0x28 [ 1179.557106] el0_svc+0x34/0xf0 [ 1179.560159] el0t_64_sync_handler+0xd0/0xe4 [ 1179.564334] el0t_64_sync+0x198/0x19c [ 1179.567996] Code: 54000300 35000360 f9402261 79409a62 (f9400421) [ 1179.574081] ---[ end trace 0000000000000000 ]---

Linux

In the Linux kernel, the following vulnerability has been resolved: HID: hid-oxp: use cancel_delayed_work_sync() in remove oxp_hid_remove() uses cancel_delayed_work() for all three delayed work items. cancel_delayed_work() only dequeues a pending work item without waiting for a currently executing callback to finish. If any of the work callbacks (oxp_rgb_queue_fn, oxp_btn_queue_fn, oxp_mcu_init_fn) is running at the time of removal, the callback continues executing concurrently with hid_hw_close() and hid_hw_stop(), accessing the HID device after it has been closed and stopped. Use cancel_delayed_work_sync() instead to ensure that any in-progress work callback completes before device teardown proceeds.

Linux

In the Linux kernel, the following vulnerability has been resolved: smb: client: use finish_no_open() for non-regular inodes An O_CREAT open can find an existing symlink or another non-regular inode. cifs_atomic_open() calls finish_open() on it and attaches a cifsFileInfo. Symlink inodes have no CIFS release operation, so the dentry reference held by cifsFileInfo is leaked. FMODE_OPENED also prevents the VFS from following the symlink. Track whether cifs_do_create() returned an open server handle. For non-regular inodes, close the handle if present, remove the pending open, and call finish_no_open() so the VFS can continue the lookup. Do not set FMODE_CREATED unless a regular file was opened. For O_NOFOLLOW with __O_REGULAR, return -ELOOP before the VFS's -EFTYPE check. Defer closing a legacy POSIX handle on a non-regular inode until after inode lookup. This avoids closing it again if lookup fails.

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't warn when an IBSS has no channel to scan ieee80211_request_ibss_scan() warns when regulatory leaves no allowed channel, but that can happen as the regdomain can change while IBSS is operating, and it can continue to operate briefly during the 60s grace period until it's shut down. Just remove the warning in this case.

Linux

In the Linux kernel, the following vulnerability has been resolved: s390/ipl: Fix NULL deref in dump_reipl without re-IPL parm block Unlike kdump, which passes the re-IPL parameter block through os_info, the stand-alone dump passes it through the IPL parm block address and checksum in lowcore. Some IPL types, like HMC FTP boot or QEMU direct kernel boot, might not provide an IPL parameter block. In this case reipl_type_init() selects IPL_TYPE_UNKNOWN and reipl_block_actual remains NULL. Nevertheless, dump_reipl_run() unconditionally dereferences it when preparing the lowcore fields. This may happen to work by chance when address zero contains readable lowcore data. A zero IPL parameter block address is then stored in lowcore, causing the stand-alone dumper to enter disabled wait after completing the dump. Explicitly store a zero IPL parameter block address and checksum when no re-IPL parameter block is available. This does not change the behavior: the stand-alone dumper completes the dump and halts, while valid re-IPL parameter blocks continue to be handled as before.

Linux

In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL An LWT_SEG6LOCAL program can invalidate its cached SRH with bpf_lwt_seg6_adjust_srh() and then call bpf_skb_pull_data(). The latter may reallocate skb->head, leaving the per-CPU SRH pointer dangling. Post-program SRH validation then writes through that pointer. Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL programs so the verifier rejects this unsafe helper combination. Other LWT program types continue to expose the helper through lwt_out_func_proto().

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reset the LED state when ifup fails When the first interface comes up, the radio LED is turned on. This can start the TPT trigger timer, which continues running. But if bringing up the interface fails then the timer keeps running and won't be stopped by anything, eventually it can be freed: ODEBUG: free active (active state 0) object: ffff888127e12130 object type: timer_list hint: tpt_trig_timer+0x0/0x300 net/mac80211/led.c:145 WARNING: CPU: 0 PID: 5923 at lib/debugobjects.c:612 debug_print_object+0x1a2/0x2b0 debug_check_no_obj_freed+0x4b7/0x600 lib/debugobjects.c:1129 kfree+0x436/0x670 mm/slub.c:6818 ieee80211_led_exit+0x162/0x1c0 net/mac80211/led.c:210 ieee80211_unregister_hw+0x27e/0x3a0 net/mac80211/main.c:1706 rt2x00lib_remove_dev+0x55b/0x670 Undo the LED state in the error path.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: bridge: vlan: fix bugs caused by switchdev deletion errors Allowing switchdev to prevent vlan deletion and error out in __vlan_del could cause multiple different issues - inconsistent state, memory leaks when flushing, NULL pointer dereference on bridge error when flushing. It doesn't make sense to allow it to stop __vlan_del, so log the error and continue with software vlan deletion. This is also consistent with 8021q behaviour.

Linux

In the Linux kernel, the following vulnerability has been resolved: xfrm: serialize state GC with device state flush The deferred-device pass in xfrm_dev_state_flush() finds states under xfrm_state_dev_gc_lock, but drops the lock before calling xfrm_dev_state_free() because the driver callback may sleep. The device GC list does not hold an xfrm_state reference, so the state GC worker can destroy the same state concurrently. The race can proceed as follows: CPU 0 CPU 1 find x on the device GC list drop xfrm_state_dev_gc_lock read x->xso.dev xfrm_state_gc_destroy(x) xfrm_dev_state_free(x) xfrm_state_free(x) continue xfrm_dev_state_free(x) Both paths can invoke the driver callback and drop the device reference. CPU 0 can also access the xfrm_state after CPU 1 has freed it. KASAN reported: BUG: KASAN: slab-use-after-free in xfrm_dev_state_free+0x24c/0x2a0 Read of size 8 at addr ffff88810bbaa960 by task poc/102 Call Trace: xfrm_dev_state_free+0x24c/0x2a0 xfrm_dev_state_flush+0x353/0x400 xfrm_dev_event+0x26d/0x3a0 notifier_call_chain+0xc0/0x280 __dev_notify_flags+0x169/0x250 netif_change_flags+0xe7/0x160 dev_change_flags+0x96/0x220 devinet_ioctl+0x7f4/0x1880 Allocated by task 87: xfrm_state_alloc+0x1e/0x5c0 xfrm_add_sa+0xe7f/0x5820 xfrm_user_rcv_msg+0x4f3/0x940 Freed by task 57: kmem_cache_free+0xcb/0x3d0 xfrm_state_gc_task+0x4a8/0x650 process_one_work+0x63a/0x1070 Serialize xfrm_state destruction against the deferred-device pass with a mutex. Keep xfrm_state_dev_gc_lock limited to list operations and retain the existing callback and device-reference release ordering.

Linux

In the Linux kernel, the following vulnerability has been resolved: mm: filemap: retain mapped dropbehind folios Fault-around can map ready dropbehind folios without going through the normal page-cache lookup that clears dropbehind. A mapping represents a competing cached user, so retain the folio instead of forcibly unmapping it when writeback completes. For a mapped folio, folio_unmap_invalidate() can call unmap_mapping_folio(), which takes i_mmap_rwsem and may sleep. Retaining mapped folios avoids this path when folio_end_dropbehind() runs in non-preemptible task context. Tal was able to trigger a sleeping-in-atomic warning due to this [1]. Unmapped dropbehind folios continue through the existing invalidation path.

Linux

In the Linux kernel, the following vulnerability has been resolved: IB/mlx4: Fix use-after-free on pkey sysfs registration failure register_pkey_tree() ignores errors from register_one_pkey_tree() and continues registering the remaining slaves. The per-slave error path has already released the pkey parent kobjects, but their pointers remain stored in the device. A later device cleanup therefore passes the stale pointers to kobject_put(), causing a use-after-free. Clear the parent pointers after releasing a failed slave tree and skip unregistered trees during device cleanup. This preserves the existing best-effort registration behavior while preventing a second cleanup of the failed tree.

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix RX buffer OOB-write in wilc_wlan_handle_isr_ext() wilc_wlan_handle_isr_ext() takes the RX transfer size from the device-reported interrupt status register (a 15-bit field shifted left by 2, up to 131068 bytes) and reads that many bytes from the device into rx_buffer, which is only WILC_RX_BUFF_SIZE (96K) large. The wrap check only handles the current offset; the size itself is never compared against the buffer, so a bogus SDIO device can make the driver OOB-write rx_buffer by up to ~32K with data it controls. The oversized transfer also leaves rx_buffer_offset past the end of the buffer, after which the unsigned wrap check stops working and the overflow can repeat. Drop any transfer whose size exceeds the RX buffer, acknowledging the data interrupt and re-arming the RX engine so the bogus frame is discarded and reception can continue. This also restores the rx_buffer_offset <= WILC_RX_BUFF_SIZE invariant the wrap check relies on. This is not expected to change driver behavior in most cases: without this check, an oversized transfer would most likely corrupt neighboring kernel memory instead of completing anyway, and the drop path performs the same interrupt acknowledgment and RX engine re-arming as the normal path, so subsequent transfers are received unaffected. Discovered by Atuin - Automated Vulnerability Discovery Engine.

Linux

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB struct field reads in move_smb2_ea_to_cifs() In move_smb2_ea_to_cifs(), the while (src_size > 0) loop condition is insufficient. It allows iteration to continue even if the remaining src_size is too small to contain a complete smb2_ea_info structure. Consequently, reads of ea_name_length and ea_value_length can occur out-of-bounds. Fix this by ensuring src_size >= sizeof(*src) before attempting to read any structure fields. Additionally, reject any next_entry_offset that is smaller than sizeof(*src) or that would advance the pointer beyond the available buffer. Note that for calls where the server returns a malformed EA list, the error returned to userspace changes from -ENODATA (getxattr) or -ERANGE (listxattr) to -EIO. This correctly signals a server protocol error rather than misleadingly indicating "attribute not present" or "output buffer too small".

Linux

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: reject a command chain that carries no commands A chain whose command_count is zero passes the payload length check, because struct_size(payload, data, 0) is just the header. The fill loop then does not run, so offset stays zero and the request is submitted with a zero-length buffer. On firmware without AIE2_NPU_COMMAND that ends at the opcode check, since op is still ERT_INVALID_CMD and aie2_get_chain_msg_op() answers MSG_OP_MAX_OPCODE. aie2_get_npu_chain_msg_op() answers MSG_OP_CHAIN_EXEC_NPU whatever it is given, so there the submission continues to drm_clflush_virt_range(cmd_buf, 0), which reads the byte before the buffer and faults on the vmap guard page. EXEC_CMD is reachable by any process that can open the render node. Reject the request instead.

Linux

In the Linux kernel, the following vulnerability has been resolved: ksmbd: propagate DACL parsing errors parse_dacl() silently accepts truncated ACEs and allocation failures, allowing set_info_sec() to continue with an incomplete ACL conversion. Return parsing and allocation errors to parse_sec_desc() so malformed security descriptors are rejected before inode attributes or ACL xattrs are updated.

Linux

In the Linux kernel, the following vulnerability has been resolved: bpf: backtrack_insn(): Handle ld_{abs,ind} subprog exit edge Nicholas Carlini reported a bug in precision backtracking mechanism for BPF_LD | BPF_{IND,ABS} instructions. These instructions are modelled as two branches: - fallthrough; - implicit exit from current subprogram. The implicit exit case was not handled by the backtrack_insn() function. When backtracking such a path backtrack_insn() did not call bt_subprog_enter(), which meant that backtracking continued manipulating precision marks in a caller frame, while looking at instructions in a callee frame. This lead to segmentation faults during verification (see the selftest), or unsound state pruning.

Linux

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btrtl: Don't leak return code when parsing firmware format v2 When key_id from chip is zero, rtlbt_parse_firmware_v2() intentionally ignores all security headers. However, the implementation simply breaks from a switch statement and leaks uninitialized return code `rc' (if the first section is a security one) or the previous section's `rc'. Fix it by really skipping a loop with `continue'. For consistency and readability, also do the same for the default case.

Linux

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_api: release all action references on NEWACTION failure When a batched RTM_NEWACTION request replaces an existing action, tcf_idr_check_alloc() takes a temporary reference on it. If a later action fails to initialize, tcf_action_destroy() uses strict release semantics to clean up the actions initialized so far. For an action bound to a filter, the strict check returns -EPERM without dropping the temporary reference. This error also makes tcf_action_destroy() return before releasing subsequent entries. Any new action initialized between the bound action and the failing entry is leaked together with its reserved IDR slot, preventing reuse of its index. Use tcf_idr_release() to drop each reference held by the batch without rejecting bound actions. This allows cleanup to continue through all initialized entries and preserves the module reference release when an action is destroyed. Explicit action deletion and flushing retain their separate bind-count checks.

Linux

In the Linux kernel, the following vulnerability has been resolved: gfs2: fix quota init duplicate scan gfs2_quota_init() checks for duplicate quota_change IDs while holding qd_lock and the quota hash bucket bitlock. That path used gfs2_qd_search_bucket(), which takes a lockref reference via lockref_get_not_dead(). On PREEMPT_RT this may sleep, which is not allowed under the bucket bitlock, triggering "sleeping function called from invalid context". Use a no-ref bucket lookup in this path, then continue duplicate handling without taking a lockref there. Refactor gfs2_qd_search_bucket() to build on top of the no-ref helper so lookup traversal stays in one place. This patch fixes a bug reported by syzbot.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: pin mqd and fw object bo to avoid eviction mqd and fw objects are queue core objects which should remain valid and never be unmapped and evicted for user queues to work properly. During eviction if these buffers are evicted the hw continue to use the invalid addresses and caused page faults and system hung.

Linux

In the Linux kernel, the following vulnerability has been resolved: tty: serial: 8250: protect against NULL uart->port.dev in register serial8250_register_8250_port() conditionally copies uart->port.dev from up->port.dev only when up->port.dev is non-NULL: if (up->port.dev) { uart->port.dev = up->port.dev; ... } So if both the existing uart slot and up have a NULL ->dev, uart->port.dev remains NULL. The very next ACPI companion check then dereferences it unconditionally: if (!has_acpi_companion(uart->port.dev)) { has_acpi_companion() reads dev->fwnode without a NULL guard (include/linux/acpi.h), so this NULL-derefs the kernel for the remaining no-dev case rather than just skipping the mctrl_gpio_init() initialisation as intended. smatch flags the inconsistency: drivers/tty/serial/8250/8250_core.c:767 serial8250_register_8250_port() error: 'uart->port.dev' could be null (see line 719) Guard the call with a NULL check so register continues to work for callers that legitimately have no parent device (legacy non-OF/non-ACPI registrations). No functional change for callers that pass a non-NULL ->dev.

Linux

In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: rework FDB management on the bridge leave path On bridge leave, the dpaa2_switch_port_set_fdb() function always allocates a new FDB for the port which is becoming standalone. In case no FDB is found, then the port leaving a bridge will continue to use the current one. The above logic does not cover the case in which there are multiple bridges which have ports from the same DPSW instance. In this case, when the last port leaves bridge #1, it finds an unused FDB to switch to, but the old FDB is not marked as unused. Since the number of FDBs is equal to the number of DPSW interfaces, this will eventually lead to multiple ports sharing the same FDB. Fix this by changing how we are managing the FDBs on the leave path. Instead of directly allocating a new FDB, first verify if the current port is the last one to leave a bridge. If this is the case, then continue to use the current FDB and only allocate another FDB if there are other ports remaining in the bridge.

Linux

In the Linux kernel, the following vulnerability has been resolved: ASoC: rockchip: rockchip_pdm: Handle runtime PM resume failures in set_fmt rockchip_pdm_set_fmt() calls pm_runtime_get_sync() before accessing hardware registers, but ignores its return value. If the runtime resume fails, the function continues to perform register accesses while the device state is undefined. Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() and return early on failure to avoid unpowered register accesses.

Linux

In the Linux kernel, the following vulnerability has been resolved: ipv6: use RCU iterator to dump route exceptions rt6_nh_dump_exceptions() uses hlist_for_each_entry() to iterate over RCU-protected exception lists. The caller holds rcu_read_lock(), but does not hold rt6_exception_lock, so rt6_insert_exception() can concurrently add an entry with hlist_add_head_rcu(). KCSAN reports this race (irrelevant details omitted): ================================================================== BUG: KCSAN: data-race in rt6_insert_exception / rt6_nh_dump_exceptions write (marked) to 0xffff8a7c44c59620 of 8 bytes by interrupt on cpu 5: rt6_insert_exception+0x3bb/0x760 __ip6_rt_update_pmtu+0x4fe/0x750 ip6_sk_update_pmtu+0x19a/0x3b0 udpv6_err+0x3ff/0x800 icmpv6_notify+0x1e1/0x440 icmpv6_rcv+0x8c0/0xab0 ip6_protocol_deliver_rcu+0x616/0x840 ip6_input_finish+0xb9/0x160 ... entry_SYSCALL_64_after_hwframe+0x77/0x7f read to 0xffff8a7c44c59620 of 8 bytes by task 549 on cpu 14: rt6_nh_dump_exceptions+0xb3/0x260 rt6_dump_route+0x53e/0x5f0 fib6_dump_node+0x6d/0xf0 fib6_walk_continue+0x290/0x2d0 fib6_dump_table+0x28d/0x360 inet6_dump_fib+0x37d/0x620 rtnl_dumpit+0x7b/0xd0 netlink_dump+0x3ae/0x7e0 ... entry_SYSCALL_64_after_hwframe+0x77/0x7f 4 locks held by dumper/549: ... #1: (rcu_read_lock){....}-{1:3}, at: inet6_dump_fib+0x88/0x620 #2: (&tb->tb6_lock){+.-.}-{3:3}, at: fib6_dump_table+0x1e9/0x360 #3: (rcu_read_lock){....}-{1:3}, at: rt6_dump_route+0x483/0x5f0 value changed: 0xffff8a7c44e05700 -> 0xffff8a7c45d60100 Reported by Kernel Concurrency Sanitizer on: CPU: 14 UID: 0 PID: 549 Comm: dumper Not tainted 7.2.0-rc7-virtme #38 PREEMPT(lazy) ... Use hlist_for_each_entry_rcu() to safely iterate over the exception list.

Linux

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: skip device-private PMDs in madvise_free_huge_pmd madvise_free_pte_range() checks pmd_trans_huge(*pmd) unlocked, then madvise_free_huge_pmd() takes pmd_trans_huge_lock(). pmd_is_huge() returns true for a device-private PMD, so orig_pmd can be device-private and enter the !pmd_present() branch. Skip device-private PMDs in that non-present branch and continue to out before calling pmd_folio(). Downgrade the check to VM_WARN_ON_ONCE() so an unexpected PMD softleaf logs a warning rather than panicking. Drop the thp_migration_supported() guard: it expands to IS_ENABLED(CONFIG_ARCH_SUPPORTS_PMD_SOFTLEAF), and both pmd_is_migration_entry() and pmd_is_device_private_entry() already return false when that config is not selected, so the guard suppresses only the case where the warning would already be silent. Potential trigger: an HMM-based GPU driver races with madvise(MADV_FREE): migrate_vma_pages() flips the PMD to a device-private entry between the caller's pmd_trans_huge() check and the callee's pmd_trans_huge_lock().

Linux

In the Linux kernel, the following vulnerability has been resolved: mm/madvise: skip device-private PMDs in cold and pageout walks madvise_cold_or_pageout_pte_range() takes pmd_trans_huge_lock(), whose pmd_is_huge() check returns true for a device-private PMD. The subsequent !pmd_present() branch has a VM_BUG_ON() asserting migration is the only allowed non-present case; a device-private PMD trips it. Skip device-private PMDs in that non-present branch and continue to huge_unlock before calling pmd_folio(). Downgrade the check to VM_WARN_ON_ONCE() so an unexpected PMD softleaf logs a warning rather than panicking. Drop the thp_migration_supported() guard: it expands to IS_ENABLED(CONFIG_ARCH_SUPPORTS_PMD_SOFTLEAF), and both pmd_is_migration_entry() and pmd_is_device_private_entry() already return false when that config is not selected, so the guard suppresses only the case where the warning would already be silent. Potential trigger: an HMM-based GPU driver races with madvise(MADV_COLD)/MADV_PAGEOUT: pmd_trans_huge(*pmd) reads true, then migrate_vma_pages() flips the PMD to a device-private entry before the PMD lock is acquired.