Recherche « Cisco IOS »

Cisco IOS XR Software

A vulnerability in the IPv4 packet processing functionality of Cisco IOS XR Software that affects Cisco ASR 9000 and 9900 Series Aggregation Services Routers as well as Cisco ASR 9902 and 9903 Compact High-Performance Routers could allow an unauthenticated, remote attacker to cause network processor (NP) errors, resulting in a line card reset or shutdown and a denial of service (DoS) condition.  This vulnerability is due to the incorrect handling of crafted IPv4 packets that are received on an affected line card interface and processed as for-us traffic. The issue can result in an NP reset, causing traffic loss on the affected line card while it recovers. Under repeated reset conditions, the network processor may enter a persistent shutdown state, in which case an explicit line card reload may be required to restore traffic. The vulnerability is within the IPv4 packet-processing path. Transit IPv4 traffic does not trigger this issue and IPv6 traffic cannot trigger it.

Cisco IOS XR Software · Cisco ios xr

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XR Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20280 are related to improper checking or handling of exceptional condition issues that are grouped under the Common Weakness Enumeration (CWE) CWE-703.

Cisco IOS XR Software

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XR Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20278 are related to improper neutralization issues that are grouped under the Common Weakness Enumeration (CWE) CWE-707.

Cisco IOS XR Software

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XR Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20277 are related to protection mechanism failure issues that are grouped under the Common Weakness Enumeration (CWE) CWE-693.

Cisco IOS XR Software · Cisco ios xr

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XR Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20276 are related to insufficient control flow management issues that are grouped under the Common Weakness Enumeration (CWE) CWE-691.

Cisco IOS XR Software

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XR Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20275 are related to incorrect calculation issues that are grouped under the Common Weakness Enumeration (CWE) CWE-682.

Cisco IOS XE Software · Cisco IOS · Cisco ios xe

A vulnerability in the Extensible Messaging Client Protocol (XMCP), also referred to as the External Client protocol, of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of malformed XMCP packets. An attacker could exploit this vulnerability by sending a malformed XMCP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload unexpectedly, resulting in a DoS condition. The attacker does not need the XMCP client username to exploit this vulnerability.

Cisco IOS XE Software · Cisco ios xe

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XE Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20273 are related to improper input validation issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-20.

Cisco IOS XE Software · Cisco ios xe

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XE Software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20271 are related to insufficient control flow management issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-691.  

Cisco IOS XE Software · Cisco ios xe

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XE Software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20270 are related to incorrect calculation issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-682.

Cisco IOS XE Software · Cisco ios xe

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XE Software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20269 are related to issues with improper control of a resource through its lifetime that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-664.

Cisco IOS XE Software · Cisco ios xe

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XE Software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20268 are related to issues with improper restriction of operations within the bounds of a memory buffer that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-119.

Cisco IOS XE Software · Cisco ios xe

A vulnerability in the Blocks Extensible Exchange Protocol (BEEP) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling when parsing a specific BEEP SOAP request. An attacker could exploit this vulnerability by sending a specific BEEP SOAP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.

Cisco IOS XE Software · Cisco ios xe

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS XE Software could allow an authenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to improper error handling when parsing SNMP requests. This vulnerability affects all versions of SNMP — Versions 1, 2c, and 3. An attacker could exploit this vulnerability by sending a malformed SNMP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly. The attacker must have the SNMPv1 or v2c read-only or read-write community string or valid SNMPv3 user credentials on the affected device.

Cisco IOS · Cisco IOS XE Software · Cisco IOS XE Catalyst SD-WAN · Cisco ios xe sd-wan

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow the following: An authenticated, remote attacker with low privileges could cause a denial of service (DoS) condition on an affected device that is running Cisco IOS Software or Cisco IOS XE Software. To cause the DoS, the attacker must have the SNMPv2c or earlier read-only community string or valid SNMPv3 user credentials. An authenticated, remote attacker with high privileges could execute code as the root user on an affected device that is running Cisco IOS XE Software. To execute code as the root user, the attacker must have the SNMPv1 or v2c read-only community string or valid SNMPv3 user credentials and administrative or privilege 15 credentials on the affected device. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device over IPv4 or IPv6 networks. This vulnerability is due to a stack overflow condition in the SNMP subsystem of the affected software. A successful exploit could allow a low-privileged attacker to cause the affected system to reload, resulting in a DoS condition, or allow a high-privileged attacker to execute arbitrary code as the root user and obtain full control of the affected system. Note: This vulnerability affects all versions of SNMP.

Cisco IOS

Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of crafted CIP packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted CIP packets to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCuz95334.

Cisco IOS · IntelliShield Universal Product · Cisco ios xe

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

Cisco ios · Cisco ios xe · Cisco ios xr

The server IKEv1 implementation in Cisco IOS 12.2 through 12.4 and 15.0 through 15.6, IOS XE through 3.18S, IOS XR 4.3.x and 5.0.x through 5.2.x, and PIX before 7.0 allows remote attackers to obtain sensitive information from device memory via a Security Association (SA) negotiation request, aka Bug IDs CSCvb29204 and CSCvb36055 or BENIGNCERTAIN.

Cisco ios

Multiple cross-site request forgery (CSRF) vulnerabilities in the HTTP Administration component in Cisco IOS 12.4 on the 871 Integrated Services Router allow remote attackers to execute arbitrary commands via (1) a certain "show privilege" command to the /level/15/exec/- URI, and (2) a certain "alias exec" command to the /level/15/exec/-/configure/http URI. NOTE: some of these details are obtained from third party information.