Veille CVE

Recherche « Apache Software Foundation Apache MINA »

42 CVE

Critique 11 Élevée 14 Moyenne 12 Faible 0 Non évaluée 5 Exploitées (KEV) Tri : plus récentes « Apache Software Foundation Apache MINA » ✕
  1. CVE-2026-90484 – Non évaluée

    Apache Software Foundation Apache bRPC

    The MySQL client response parser in Apache bRPC dereferences a null pointer when the server peer sends a zero-payload-length response packet. A response packet whose declared payload length is zero is accepted by the frame-length check (is_full_package), after which the parser reads the response type byte via an unbounded 5-byte fetch that returns nullptr, and type = p[4] dereferences it, crashing the client process. Root Cause: In brpc::policy::MysqlReply::ConsumePartialIOBuf, buf.fetch(header, 5) returns nullptr when the buffered data only holds the 4-byte header of a zero-length packet, then the code reads p[4] (and, in the fast-auth path, p2[4]) without checking for a null or zero-length packet. Affected Scenarios: A brpc MySQL client connecting to a malicious or compromised MySQL server (or a MITM) can be crashed by a zero-length server response packet, resulting in denial of service of the client. Fix: The fix rejects zero-length response packets (returning PARSE_ERROR_ABSOLUTELY_WRONG) both for the initial response type determination and after a fast-auth marker, before reading the type byte. Upgrade to the Apache bRPC version 1.18.0 or apply the PR patch at https://github.com/apache/brpc/pull/3536.

  2. CVE-2026-82425 – Non évaluée

    Apache Software Foundation Apache bRPC

    A reachable assertion in Apache bRPC (version < 1.18.0) on all platforms allows a malicious remote peer to crash the process, resulting in denial of service. Root Cause: When a Socket with health checking enabled fails, Socket::WaitAndReset closes its file descriptor while the event dispatcher may still be delivering an input event (EPOLLIN/EVFILT_READ) that was fetched for the just-closed fd. If the health check then succeeds and revives the Socket, Socket::Address succeeds again while the fd is still -1 (the next write reconnects on demand). In that window, Socket::OnInputEvent hits CHECK(!(events & EPOLLIN)) (or the kqueue equivalent) because the Socket is addressable but has no fd. CHECK failures terminate the process when bRPC is built with glog or when the gflag -crash_on_fatal_log is enabled (CHECK always terminates in OFFICIAL_BUILD/NDEBUG builds as well). Affected Scenarios: Applications using bRPC clients with health check enabled (-health_check_interval). A malicious remote peer that the client connects to can deliberately abort connections and immediately accept the health check probes, racing connection teardown against health check revival to trigger the assertion and abort the process. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3510 Note: After applying the fix, stale input events on a Socket revived without an fd are silently dropped instead of triggering the assertion. No user-visible interface or wire protocol is changed.

  3. CVE-2026-82231 – Non évaluée

    Apache Software Foundation Apache bRPC

    A Thrift client in Apache bRPC (version < 1.18.0, built with WITH_THRIFT which is off by default) can be crashed by the server peer it talks to. When the server returns a T_EXCEPTION reply whose exception struct is malformed, the client decodes it without catching what Apache Thrift throws (TProtocolException, TTransportException or std::length_error). The exception unwinds out of the bthread task function and the process calls std::terminate(), terminating the whole process along with every other in-flight RPC. This is the client response path, so the adversary is the server peer, which THREAT_MODEL.md treats as untrusted. It requires a WITH_THRIFT build (off by default). How to Fix: 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3500

  4. CVE-2026-82210 – Non évaluée

    Apache Software Foundation Apache bRPC

    Enforceable assertion in the streaming feature of Apache bRPC (version < 1.18.0) on all platforms allows a remote attacker to crash the server process by sending a malformed stream feedback frame. Root Cause: When handling FRAME_TYPE_FEEDBACK frames, bRPC calls Stream::SetRemoteConsumed() which contains CHECK(_cur_buf_size > 0) and unconditionally asserts CHECK(buf.IsEmpty()) on the frame payload. A feedback frame that carries an unexpected payload, or a feedback frame received on a stream where flow control is disabled (cur_buf_size == 0), reaches these assertions. On failure, CHECK failures abort the process, allowing an unauthenticated single client (once a stream is established) to terminate the server and cause a denial of service. Affected Scenarios: Use bRPC server with the streaming control feature (Stream API) served from untrusted network. How to Fix: 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3494 The fix rejects malformed feedback frames with EPROTO and closes only the affected stream instead of crashing the whole process, and it bounds buffer shrinking so cur_buf_size never drops to 0 while flow control is enabled.

  5. CVE-2026-58064 – Non évaluée

    Apache Software Foundation Apache bRPC

    The Redis protocol implementation in Apache bRPC allowed inline command parsing to allocate and copy the full connection buffer before a complete CRLF-terminated command was available. A remote attacker with access to a Redis-protocol bRPC service could send long inline inputs without a terminating CRLF to increase memory usage and CPU copy overhead, potentially causing denial of service. Root Cause: The Redis inline command parser allocated memory based on the current input buffer size and copied the entire buffer before determining the current inline command boundary. The existing redis_max_allocation_size limit was applied to RESP bulk strings and arrays, but not effectively to the inline command path before allocation. Affected Scenarios: Use Apache bRPC server with Redis protocol enabled and reachable by untrusted clients. How to Fix: 1. Upgrade Apache bRPC to version 1.18.0, which fixes this issue. 2. Apply the patch from PR https://github.com/apache/brpc/pull/3363 . Note: The fix applies redis_max_allocation_size to Redis inline command lines and scans for CRLF before allocating parser arena memory. Inline command lines exceeding this limit are rejected.

  6. CVE-2026-85315 5.3 Moyenne

    Apache Software Foundation Apache Camel

    Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel gRPC component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. When a route behind a gRPC consumer failed, the exception's message was placed into the gRPC status description. Unlike the status cause, which stays local to the server, the description is transmitted to the calling client, so an external caller able to provoke a failure could read the internal error message. What that discloses depends on the exception, and in practice includes class and package names, paths, host names and connection detail carried in messages. This is the gRPC member of the same unmuted-consumer-exception family as the knative, mina and CXF advisories published alongside it. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. A muteException consumer option, defaulting to true, puts a generic description in the status instead of the route exception's message. Set muteException=false to restore the previous output. For deployments that cannot upgrade immediately, map failures onto an explicit status in an onException handler so the framework never copies the exception message into the description.

  7. CVE-2026-85247 5.9 Moyenne

    Apache Software Foundation Apache Camel

    Improper Certificate Validation vulnerability in Apache Camel Knative component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. When SSL was enabled on the Knative HTTP client but no truststore was configured, the client options fell back to trusting every presented certificate rather than to the JVM's default trust anchors. A deployment that switched TLS on without also configuring a truststore therefore obtained an encrypted connection with no peer authentication, which an attacker positioned on the network path can terminate and read. The dangerous state is reached by omission rather than by an explicit opt-in, which is what makes it a framework defect: turning TLS on should not be the thing that turns certificate validation off. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. With no truststore configured the trust options are now left unset so the JVM default trust anchors apply, the same fallback SSLContextParameters and the rest of Camel use. Trusting every certificate is now reached only by asking for it explicitly through the trust.all property, which remains available for development against a cluster with a self-signed certificate. For deployments that cannot upgrade immediately, configure a truststore explicitly wherever SSL is enabled. After upgrading, a deployment that was relying on the implicit trust-all behaviour must either configure a truststore or set the trust.all property deliberately.

  8. CVE-2026-85246 5.3 Moyenne

    Apache Software Foundation Apache Camel

    Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Mina component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. When processing of an exchange failed, the Mina consumer wrote exchange.getException() straight back over the socket to the remote peer. Over a textline codec that hands the peer the exception's class name and message; over the object codec it hands over the serialised exception, cause chain included. A remote peer able to provoke a failure could therefore read internal detail about the deployment - class and package names, and whatever a message or nested cause happens to carry, which in practice can include paths, host names and connection detail. The consumer had no option to suppress this, unlike the HTTP-family consumers aligned by CAMEL-23651. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. A muteException consumer option, defaulting to true, replaces the route exception with a generic one carrying no class name, message or stack trace, while still writing a reply so that a synchronous peer is not left to time out. Set muteException=false to restore the previous behaviour. For deployments that cannot upgrade immediately, add an onException handler that sets the reply body explicitly, so the framework never writes the exception back to the peer.

  9. CVE-2026-84178 6.1 Moyenne

    Apache Software Foundation Apache Camel

    Cross-Site Request Forgery (CSRF) vulnerability in Apache Camel OAuth component. This issue affects Apache Camel: from 4.11.0 before 4.18.5, from 4.19.0 before 4.22.1. The authorization code callback did not carry a state parameter binding it to the authorization request that started the flow, and the callback did not verify one. An authorization code obtained in any browser could therefore be redeemed at the callback and associated with whichever session presented it, which is login cross-site request forgery: a victim can be silently signed in as an identity the attacker controls, so that actions the victim then performs, and data they then submit, land in the attacker's account. The same unvalidated callback handling also allowed the post-authentication redirect target to be influenced, giving an open redirect from a trusted origin. The state check runs before the authorization code is redeemed, so these paths are reachable without any interaction with the identity provider. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The authorization request now issues a state value bound to the session, and the callback rejects a request whose state is absent or does not match, stopping the route with a 400 response. For deployments that cannot upgrade immediately, terminate the authorization code flow in a component that performs its own state binding rather than relying on the Camel callback. Note that after upgrading, a deployment behind a proxy that drops or rewrites the callback query string will begin to see 400 responses, because the state parameter must survive the round trip.

  10. CVE-2026-80312 8.2 Élevée

    Apache Software Foundation Apache Camel

    Improper Authentication vulnerability in Apache Camel OAuth component. This issue affects Apache Camel: from 4.11.0 before 4.18.5, from 4.19.0 before 4.22.1. The camel-oauth processors that guard a route did not stop the exchange when authentication could not be completed. Where a failure to establish an authenticated session should have terminated routing and returned an error to the caller, the processors fell through and returned control to the route, so the request continued to the protected endpoint as though authentication had succeeded. The effect is a fail-open authentication guard: an unauthenticated caller reached whatever the route did next. The condition is reached on the ordinary request path of a route configured to require OAuth, and needs no special configuration or prior access on the caller's part. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The processors now stop the exchange and set the appropriate error status whenever an authenticated session cannot be established, so a failed authentication no longer reaches the protected part of the route. For deployments that cannot upgrade immediately, place an explicit authorization check after the OAuth processor rather than relying on it to halt the exchange, and verify that the route stops on failure.

  11. CVE-2026-79984 7.4 Élevée

    Apache Software Foundation Apache Camel

    Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Mina SFTP component. This issue affects Apache Camel: from 4.18.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the mina-sftp scheme, an alternative SFTP implementation whose consumer derives from the same RemoteFileConsumer base class and therefore inherited the same unconstrained resolution. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream.

  12. CVE-2026-94053 9.1 Critique

    Apache Software Foundation Apache MINA SSHD

    Authentication bypass via LDAP injection in component sshd-ldap in Apache MINA SSHD versions 1.2.0 to 2.19.0 and 3.0.0-M1 to 3.0.0-M5. Apache MINA SSHD is a Java library for client-side and server-side SSH. The optional sshd-ldap component provides support for integrating password and publickey authentication on the server side with an LDAP server. sshd-ldap is an optional component. SSH servers implemented with Apache MINA SSHD are affected only if they use sshd-ldap and do configure it to be used for password of public key authentication. Other Apache MINA SSHD servers are not affected. Lack of escaping LDAP filter metacharacters enabled successful authentication with username "*" and password "*". Users are recommended to upgrade affected applications to version 2.20.0 or 3.0.0-M6, which fix this issue by properly escaping filter parameters according to RFC 4515.

  13. CVE-2026-94052 9.1 Critique

    Apache Software Foundation Apache MINA SSHD

    A missing check in LdapPasswordAuthenticator in component sshd-ldap in Apache MINA SSHD versions 1.2.0 to 2.19.0 or 3.0.0-M1 to 3.0.0-M5 bypassed authentication checks. Apache MINA SSHD is a Java library for client-side and server-side SSH. The optional sshd-ldap component provides support for integrating password and publickey authentication on the server side with an LDAP server. sshd-ldap is an optional component. SSH servers implemented with Apache MINA SSHD are affected only if they use sshd-ldap and do configure an LdapPasswordAuthenticator to be used for password authentication. Normal password authentication via the built-in mechanisms in sshd-core is _not_ affected by this vulnerability, which concerns only LdapPasswordAuthenticator. Users are recommended to upgrade affected applications to version 2.20.0 or 3.0.0-M6, which fix this issue.

  14. CVE-2026-94029 6.5 Moyenne

    Apache Software Foundation Apache MINA SSHD

    Server-side memory exhaustion in Apache MINA SSHD 1.0.0 to 2.19.0 and 3.0.0-M1 to 3.0.0-M5, component sshd-sftp, in the SFTP v6 check-file-name/check-file-handle extension. Apache MINA SSHD is a Java library for client-side and server-side SSH. Using a very small "block size" (for instance 256, which is the minimum) on a huge file generates many (file size / block size) hashes. The resulting SFTP reply message was accumulated fully in memory server-side, which could, with a suitably large (possibly sparse) file exhaust the server-side memory, taking down the server. Users are recommended to upgrade to version 2.20.0 or 3.0.0-M6, which fix this issue by imposing a maximum limit on the size of the reply. Many SFTP implementations have a general limit on the size of SFTP messages anyway; typically 256kB as in OpenSSH or also in Apache MINA SSHD.

  15. CVE-2026-94002 7.5 Élevée

    Apache Software Foundation Apache MINA SSHD

    Possible memory exhaustion in SFTP clients (DefaultSftpClient) in component sshd-sftp in Apache MINA SSHD versions 0.9.0 to 2.19.0 and 3.0.0-M1 to 3.0.0-M5. Apache MINA SSHD is a Java library for client-side and server-side SSH. The sshd-sftp component provides support for SFTP. The SFTP client implementation, when receiving a reply, did not check that this reply corresponded to a request sent earlier. Unsolicited replies would be stored but never consumed. A malicious server could keep sending unsolicited replies until available memory in the client was exhausted. Users are recommended to upgrade to version 2.20.0 or 3.0.0-M6, which fix this issue.

  16. CVE-2026-93996 6.5 Moyenne

    Apache Software Foundation Apache MINA SSHD

    Uncontrolled resource consumption in component ssd-scp in Apache MINA SSHD versions up to 2.19.0 or 3.0.0-M1 to 3.0.0-M5. Apache MINA SSHD is a Java library for client-side and server-side SSH. Component sshd-scp of Apache MINA SSHD provides a Java implementation of SCP. The SCP command protocol is line-oriented with LF-terminated lines. The protocol handler in sshd-scp did not impose any limit on the length of such protocol lines. A malicious peer just sending a junk command containing a never-ending sequence of characters but never a LF would cause the receiver to allocate memory to store this whole junk command, exhausting memory and crashing the application with an OutOfMemoryError. Users are recommended to upgrade to version 2.20.0 or 3.0.0-M6, which fix this issue by enforcing an upper limit on the length of SCP protocol lines.

  17. CVE-2026-93995 6.5 Moyenne

    Apache Software Foundation Apache MINA SSHD

    Improper input validation in sshd-git in Apache MINA SSHD, versions up to 2.19.0 and 3.0.0-M1 to 3.0.0-M5. Apache MINA SSHD is a Java library for client-side and server-side SSH. Component org.apache.sshd:sshd-git provides though class GitPgmCommandFactory a way to configure an Apache MINA SSHD server such that authenticated SSH clients can remotely execute git commands via the JGit library on git repositories stored on the server. In CVE-2026-58624 this mechanism was restricted to only a few git commands, including "git archive" without "--output" or "-o" options such that the resulting archive would not be written on the server but instead sent back to the client over the SSH connection. The fix done for CVE-2026-58624 was insufficient as it missed removing the single-argument "-o=file.zip" version of the command parameter from the "archive" command. Users are recommended to upgrade to version 2.20.0 or 3.0.0-M6, which fix this issue.

  18. CVE-2026-93994 8.1 Élevée

    Apache Software Foundation Apache MINA SSHD

    Apache MINA SSHD is a Java library for client-side and server-side SSH. SSH servers can be configured to require multi-authentication schemes, for instance two different public keys, not just one. In OpenSSH, this would be done by setting in sshd_config AuthenticationMethods "publickey,publickey". Apache MINA SSHD provides an equivalent configuration mechanism. In Apache MINA SSHD versions up to 2.19.0 and 3.0.0-M1 to 3.0.0-M5 the server code in component sshd-core does not enforce that the two public keys presented are different. A user can thus successfully authenticate with only one of the two key pairs required by presenting this single key twice. This is a partial authentication bypass. Users are recommended to upgrade to version 2.20.0 or 3.0.0-M6, which fix this issue.

  19. CVE-2026-77185 9.1 Critique

    Apache Software Foundation Apache MINA SSHD

    Authentication bypass in sshd-core in Apache MINA SSHD versions 2.0.0 to 2.19.0 and 3.0.0-M1 to 3.0.0-M5 for a certain (presumed rare) way to implement an SSH server. Apache MINA SSHD is a Java library for client- and server-side SSH. In the server part of the library, a mechanism to perform "asynchronous authentication" exists. A server implemented with Apache MINA SSHD must contain explicit code to make use of this feature. The implementation of this feature was flawed and could potentially lead to skipping checking the signature in public-key or hostbased authentication, or returning a wrong result. Users are recommended to upgrade to Apache MINA SSHD 2.20.0 or 3.0.0-M6, which fix the logic error and which additionally forbid the use of this "asynchronous authentication" mechanism with the public-key or hostbased authentication schemes: if used, the SSH session will be closed and the server will log an entry indicating that asynchronous authentication may be used only with password or keyboard-interactive authentication.

  20. CVE-2026-81914 4.3 Moyenne

    Apache Software Foundation Apache Airflow Google provider · Apache apache-airflow-providers-google

    Apache Airflow's Google provider built Google Drive search expressions by interpolating file and folder names directly into single-quoted string literals, without escaping the quote character that delimits them. A name containing an apostrophe therefore terminated the literal early and appended clauses of the attacker's choosing to the query. The names are frequently not written by the Dag author. In a wildcard `gcs_to_gdrive` transfer they come from the source bucket listing, so anyone able to create objects in that bucket controls them — typically an external data producer or an ingest-only service account, a different trust principal from the Dag author. An injected clause can broaden the match and so steer which file or folder the hook resolves: an upload can be directed into a folder the attacker named, and, because downloads select the most recently modified match, a download can return a file they placed rather than the one the Dag asked for. Affects deployments passing externally-sourced names to the Google Drive hook, including wildcard `gcs_to_gdrive` transfers from buckets writable by less-trusted principals. Users are advised to upgrade to `apache-airflow-providers-google` `22.6.0` or later, which escapes quote and backslash characters in every value interpolated into a Drive query.

  21. CVE-2026-94301 9.8 Critique

    Apache Software Foundation Apache MINA

    The fix for CVE-2026-47065/ZDRES-232 ("resolveProxyClass Not Overridden - acceptMatchers Filter Bypass via java.lang.reflect.Proxy"), released on 2026-06-02 and announced as "Fully addressed" in MINA 2.2.8, 2.1.13 and 2.0.29, was committed to the  2.2.X branch only. The 2.0.X and 2.1.X maintenance branches never received the resolveProxyClass() override, so the 2.0.29 and 2.1.13 artifacts listed as fixed -- and every later release on those lines, up to and including the current 2.0.30 and 2.1.14 -- remain vulnerable to the exact allow-list bypass that CVE-2026-47065 was meant to close.

  22. CVE-2026-47321 7.5 Élevée

    Apache Software Foundation Apache MINA

    The CompressionFilter class uses ZLib to deflate and inflate data sent and received. When we inflate incoming data, the filter does not control the resulting size, and create a buffer no matter what. Some compressed data may have a compression ration greater than 1 thousand, leading to an exhaustion of the application memory, as we don't control the deflated size. The fix adds such a control by allowing the application developer to provide a fixed size limit, which when reached throws an exception. It also allows the user to provide a compression ratio that should not be exceeded, protected the application from small inflated files that inflate in gigantic files, but with a grace limit for the resulting size (1Mb) to avoid false positive (like a very small file inflating with a high ratio, but resulting with a acceptable size, like a few thousands bytes) For application using this feature, it is highly recommended to create the CompressionFilter and to pass the maximum limit as a forth constructor parameter, maxDecompressedSize: public CompressionFilter(final boolean compressInbound, final boolean compressOutbound, final int compressionLevel, final int maxDecompressedSize)Optionally one can also provide a maxDecompressRatio fifth parameter, and a decompressRatioMinSize sixth parameter to allow small inflated files with a high compression ratio to still be accepted. Here are the additional constructor: public CompressionFilter(final boolean compressInbound, final boolean compressOutbound, final int compressionLevel, final int maxDecompressedSize, final long maxDecompressRatio, final long decompressRatioMinSize) Also note that a fluent API has been added to spare the users the pain to call a constructor with that many parameters:  CompressionFilter compressionFilter = new CompressionFilter()     .setCompressionLevel(Zlib.COMPRESSION_MAX)   .setMaxDecompressedSize(1_000_000)   .setMaxDecompressRatio(100).   .setDecompressRatioMinSize(100_000);  Applications using Apache MINA are advised to upgrade and configure their CompressionFilter instance.

  23. CVE-2026-82617 9.8 Critique

    Apache Software Foundation Apache OpenNLP · Apache opennlp

    The two built-in name-finder patterns exposed by opennlp.tools.namefind.RegexNameFinderFactory - DEFAULT_REGEX_NAME_FINDER.EMAIL and DEFAULT_REGEX_NAME_FINDER.URL - contain ambiguous nested quantifiers. An application that obtains these finders through RegexNameFinderFactory.getDefaultRegexNameFinders(...) and then applies them to untrusted text through RegexNameFinder.find(String[]) or RegexNameFinder.find(String) can be driven into super-linear backtracking or into unbounded matcher recursion by a small crafted input. For the EMAIL pattern, a long run of local-part characters that is never followed by an @ forces the matcher to re-scan to end-of-input from every starting offset. Cost grows quadratically with input length: an input of approximately 32 KB consumes several seconds of CPU in a single find() call and returns no match, and each doubling of the input multiplies the cost roughly four-fold. For the URL pattern, the query-string sub-expression nests a capturing repetition inside an outer repetition. The JDK matcher recurses once per query token, so an input of approximately 4 KB containing many &-separated tokens exhausts the thread stack and causes java.lang.StackOverflowError to propagate out of find(), terminating the calling thread. On a thread created with a smaller stack (for example -Xss512k, typical of server worker pools) approximately 1 KB is sufficient. In both cases an attacker who can supply text for analysis can convert a single request into seconds to minutes of pinned CPU, or into an abrupt thread death, denying service to the embedding application. No authentication, special configuration, or model file is required beyond the application having selected one of the two built-in finders. This issue affects Apache OpenNLP: from 2.0.0 through 2.5.11; from 3.0.0-M1 through 3.0.0-M5. Users are recommended to upgrade to version 2.5.12, or to 3.0.0-M6 for users tracking the 3.0.0 milestone line, which fix the issue.

  24. CVE-2026-66907 7.5 Élevée

    Apache Software Foundation Apache Camel · Apache camel

    Relative path traversal vulnerability in Apache Camel Google Storage component. This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-google-storage consumer downloads Google Cloud Storage objects to the local filesystem when the downloadFileName option is set. That option is documented as a folder or a filename, and when its value contains no expression token the consumer builds the local destination by appending the object name to it: evaluateFileExpression sets the Exchange file-name header to the remote object name and evaluates downloadFileName + "/${file:name}". The ${file:name} token returns the file-name header verbatim, unlike ${file:onlyname}, which applies FileUtil.stripPath to it. The resulting string was passed directly to new File(result) and blob.downloadTo(file.toPath()) with no lexical normalization and no check that the destination stayed inside the configured directory. The object name is not route-controlled data: the consumer lists the bucket, iterates every returned blob and creates one exchange per object from blob.getBlobId().getName() verbatim, and the filter option that could restrict those names is not applied at all unless it has been explicitly set. Google Cloud Storage object names are opaque UTF-8 keys that the service stores and lists exactly as written, with no server-side canonicalization, and a forward slash is only a display convention for pseudo-directories, so a key containing parent-directory segments survives round-tripping intact. An object name containing such segments therefore resolved to a location outside the configured downloadFileName directory, letting anyone able to influence the names present in the consumed bucket cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. The downloadFileName option is an ordinary consumer parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. The defect is consumer-only; the producer has no download-to-file sink. Camel's other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp, camel-azure-files and the Azure Storage download paths - already constrained their local downloads to the configured directory using a path-segment boundary check; camel-google-storage was the remaining object-store download sink not covered by that work. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, set the filter option to a regular expression that accepts only simple single-segment object names, so that any name carrying a path separator or a parent-directory segment is excluded before an exchange is created; note that no filtering whatsoever is applied when the option is left unset, and that the expression is matched against the whole object name. Alternatively, give downloadFileName an explicit expression that does not carry the remote path through, for example one built on ${file:onlyname} rather than the implicit ${file:name}, keeping in mind that a downloadFileName containing an expression is treated as route-author-controlled and is not covered by the containment check added in the fix. As defence in depth, treat the object names in any externally writable bucket as untrusted input and do not derive local filesystem paths from them.

  25. CVE-2026-66906 9.1 Critique

    Apache Software Foundation Apache Camel · Apache camel

    Relative path traversal vulnerability in Apache Camel Azure Storage Blob component. This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-azure-storage-blob component can download an Azure Storage blob to the local filesystem through its downloadBlobToFile operation, writing into the directory named by the fileDir endpoint option, which is documented as usable from both the producer and the consumer. BlobOperations.downloadBlobToFile built the local target by joining fileDir with the remote blob name exactly as the Azure SDK reported it (new File(fileDir, client.getBlobName())) and passed the result straight to the SDK download call, with no lexical normalization and no check that the resolved location stayed inside fileDir. The blob name is not route-controlled data: the consumer enumerates the container in BlobConsumer.createBatchExchangesFromContainer, which lists blobs and creates one exchange per entry from BlobItem.getName() verbatim, applying no name filtering by default. A blob name containing parent-directory segments therefore resolved to a location outside the configured fileDir, letting anyone able to influence the names present in the consumed container cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. Azure Storage blob containers use a flat namespace in which the blob name is an opaque key, so a name carrying such segments is stored and listed as given. The fileDir option is an ordinary common-group configuration parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. Camel's other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp and camel-azure-files - already constrained their local downloads to the configured directory using a path-segment boundary check; the camel-azure-storage-blob download path was not covered by that work. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, constrain the names the consumer will act on using the regex endpoint option, which is applied to each listed blob name as a full-string match, so that only simple single-segment names are accepted and any name carrying a path separator or a parent-directory segment is filtered out before an exchange is created; the prefix option can additionally narrow the listing server-side, noting that when both are set regex takes priority and prefix is ignored. Alternatively, avoid the downloadBlobToFile operation on untrusted containers and write the payload from the route under a file name the route itself controls, rather than one taken from the remote listing. As defence in depth, treat the blob names in any externally writable container as untrusted input and do not derive local filesystem paths from them.

  26. CVE-2026-60093 5.5 Moyenne

    Apache Software Foundation Apache Camel · Apache camel

    Relative path traversal vulnerability in Apache Camel Azure-Storage Datalake component This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-azure-storage-datalake component can download an Azure Data Lake Storage Gen2 file to the local filesystem through its downloadToFile operation, writing into the directory named by the fileDir endpoint option. DataLakeFileOperations.downloadToFile built the local target by joining fileDir with the remote path name exactly as the Azure SDK reported it (new File(fileDir, fileClientWrapper.getFileName())) and passed the result straight to the SDK download call, with no lexical normalization and no check that the resolved location stayed inside fileDir. The remote name is not route-controlled data: the consumer enumerates the filesystem in DataLakeConsumer.createBatchExchangesFromPath, which lists paths and creates one exchange per entry from PathItem.getName() verbatim, applying no name filtering by default. A path name containing parent-directory segments therefore resolved to a location outside the configured fileDir, letting anyone able to influence the names present in the consumed Data Lake filesystem cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. The fileDir option is an ordinary common-group configuration parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. Camel's other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp and camel-azure-files - already constrained their local downloads to the configured directory using a path-segment boundary check; the camel-azure-storage-datalake download path was not covered by that work. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, constrain the names the consumer will act on using the regex endpoint option, which is applied to each listed path name as a full-string match, so that only simple single-segment names are accepted and any name carrying a path separator or a parent-directory segment is filtered out before an exchange is created. Alternatively, avoid the downloadToFile operation on untrusted filesystems and write the payload from the route under a file name the route itself controls, rather than one taken from the remote listing. As defence in depth, treat the object names in any externally writable Data Lake filesystem as untrusted input and do not derive local filesystem paths from them.

  27. CVE-2026-67260 7.3 Élevée

    Apache Software Foundation Apache Airflow · Apache airflow

    Apache Airflow 3.3.0 moved human-in-the-loop tasks from the triggerer to a new `awaiting_input` task state swept by the scheduler. That sweep deserializes the task instance's `next_kwargs` without an allow-list, so a Dag author — who controls that value through the task execution API — can cause an arbitrary module import and object instantiation inside the scheduler process, or terminate the scheduler job. No non-default configuration is required: the sweep runs unconditionally every 15 seconds, and the default `allowed_deserialization_classes` setting does not cover this code path. Versions before 3.3.0 are not affected, because human-in-the-loop tasks deferred onto the triggerer instead. This is a different code path from CVE-2026-58076, which covers the same unguarded exception-node deserialization reached elsewhere — deployments that applied that fix must upgrade for this issue as well. Users are advised to upgrade to apache-airflow 3.3.1 or later.

  28. CVE-2026-58624 5.4 Moyenne

    Apache Software Foundation Apache MINA SSHD · Apache mina sshd

    Improper input validation in sshd-git in Apache MINA SSHD. Apache MINA SSHD is a Java library for client-side and server-side SSH. Component org.apache.sshd:sshd-git provides though its GitPgmCommandFactory a way to configure an Apache MINA SSHD server such that SSH clients can remotely execute git commands via the JGit library on git repositories stored on the server. This GitPgmCommandFactory allowed a user authenticated via SSH to run any JGit command available, including commands that could write files at arbitrary places such as git archive with the --output option. Affected are SSH servers implemented with Apache MINA SSHD and using the GitPgmCommandFactory. If the GitPgmCommandFactory is not configured on the server, the server is not affected. It is recommended to upgrade affected servers to Apache MINA SSHD 2.19.0 or 3.0.0-M5, which fix this issue. The issue is fixed by restricting the available commands to a small whitelist of uncritical commands (such as git log). git archive is also allowed, but its --output argument is ignored and the archive is always sent through the SSH channel to the client.

  29. CVE-2026-56624 7.3 Élevée

    Apache Software Foundation Apache MINA SSHD · Apache mina sshd

    Improper certificate validation in Apache MINA SSHD (server-side). Apache MINA SSHD is a Java library for client-side and server-side SSH. Server-side OpenSSH user certificate validation during user authentication in an Apache MINA SSHD server did not check for the unsupported force-command or verify-required options that could be embedded in the certificate, nor did it validate these options. As a result it was possible that a user could authenticate with such a certificate that included a force-command option but still was able to execute other commands. What other command exactly would be available to the user depends on the implementation of the server. This issue is fixed in Apache MINA SSHD 2.19.0 and 3.0.0-M5. Applications are advised to upgrade to these versions. The fix rejects OpenSSH user certificates that include these options, since Apache MINA SSHD implements neither force-command nor sk-*-cert-v01@openssh.com user certificates (which are the only ones for which verify-required would make sense).

  30. CVE-2026-56623 7.1 Élevée

    Apache Software Foundation Apache MINA SSHD · Apache mina sshd

    Path traversal on Windows in Apache MINA SSHD component sshd-git. Apache MINA SSHD is a Java library for client-side and server-side SSH. A git server implemented with Apache MINA SSHD component sshd-git and running on Windows could allow an authenticated remote user access to git repositories outside of the configured server-side root directory. The path validation applied for CVE-2026-48827 in Apache MINA SSHD 2.18.0 and 3.0.0-M4 was partly ineffective for Servers running on Windows. Applications are affected if they use org.apache.sshd:sshd-git to implement a git server and run on Windows. Applications not using sshd-git or not running on Windows are not affected. Users are advised to upgrade affected applications to Apache MINA SSHD 2.19.0, which fixes the issue. The issue also is present in the pre-release milestones 3.0.0-M1 to 3.0.0-M4 for a new upcoming new major version 3.0.0. Again, applications are affected only if they use sshd-git and run on Windows. Upgrade affected applications to 3.0.0-M5.

  31. CVE-2026-56452 7.5 Élevée

    Apache Software Foundation Apache MINA SSHD · Apache mina sshd

    Path traversal in the sshd-scp component of Apache MINA SSHD. Apache MINA SSHD is a Java library for client-side and server-side SSH. The implementation of receiving files or directories via SCP did not validate filenames in SCP "C" or "D" commands. A malicious sender could send filenames containing paths, resulting in files to be written in attacker-controlled places. The issue affects only * applications that use no longer supported Apache MINA SSHD versions < 2.0.0 and use the SCP functions to receive files, * or applications using sshd-scp in Apache MINA SSHD >= 2.0.0 to receive files. Applications using Apache MINA SSHD >= 2.0.0 not using sshd-scp are not affected. The issue is fixed in Apache MINA 2.19.0 and 3.0.0-M5. Affected applications are advised to upgrade to these versions.

  32. CVE-2026-42527 8.1 Élevée

    Apache Software Foundation Apache Camel · Apache camel

    Deserialization of Untrusted Data vulnerability in Apache Camel. The default ObjectInputFilter pattern shipped with several Apache Camel components for defense-in-depth deserialization filtering ('java.**;javax.**;org.apache.camel.**;!*', or the no-'javax.**' variant in the aggregation-repository components) uses a recursive 'java.**' glob that admits classes whose hashCode/equals/readObject methods perform network I/O, notably java.net.URL and java.net.InetAddress. When an attacker can deliver a Java-serialized payload to an affected Camel consumer, deserialization of a HashMap (or any collection that calls hashCode on its elements) containing java.net.URL keys causes the JVM to issue DNS queries to the attacker-supplied host during the deserialization side-effect. The class-level filter check passes because the resulting object's class (HashMap) is allow-listed; the DNS query is observable on an attacker-controlled DNS server, providing an out-of-band side channel. The exposure is highest on the camel-jms family because JmsBinding.extractBodyFromJms invokes ObjectMessage.getObject() unconditionally when mapJmsMessage=true (default). Affected components: camel-jms, camel-sjms, camel-amqp, camel-mina, camel-netty, camel-netty-http, camel-vertx-http, camel-infinispan, and the aggregation repository components camel-leveldb, camel-cassandraql, camel-consul, camel-sql (JDBC aggregation repository). This issue affects Apache Camel: from 4.14.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to a version that contains the CAMEL-23372 fix once available: 4.21.0 for the 4.21.x line, 4.18.3 for the 4.18.x line, and 4.14.8 for the 4.14.x line. For deployments that cannot upgrade immediately, configure a JMS-provider-side allow-list (Apache ActiveMQ Artemis 'deserializationAllowList' / 'deserializationDenyList', Apache ActiveMQ Classic 'org.apache.activemq.SERIALIZABLE_PACKAGES') as the primary mitigation, and/or override the in-code default via the endpoint-level 'deserializationFilter' option or the JVM-wide '-Djdk.serialFilter' system property with an explicit deny: '!java.net.**;java.**;javax.**;org.apache.camel.**;!*' (or '!java.net.**;java.**;org.apache.camel.**;!*' for the aggregation-repository components, which do not include javax.**).

  33. CVE-2026-53916 7.5 Élevée

    Apache Software Foundation Apache ActiveMQ · Apache Software Foundation Apache ActiveMQ All · Apache Software Foundation Apache ActiveMQ Stomp · Apache activemq

    Memory Allocation with Excessive Size Value vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ Stomp. An unauthenticated client that opens a STOMP NIO connection can send header bytes that never terminate which makes the broker buffer them without limit, exhausting the JVM heap. This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Stomp: before 5.19.8, from 6.0.0 before 6.2.7. Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.

  34. CVE-2026-47065 9.8 Critique

    Apache Software Foundation Apache MINA · Apache mina

    ZDRES-232: resolveProxyClass Not Overridden - acceptMatchers Filter Bypass via java.lang.reflect.Proxy Assessment: Fully addressed. When the serialised stream contains a TC_PROXYCLASSDESC (the marker for a java.lang.reflect.Proxy ), JDK’s ObjectInputStream.readProxyDesc() is dispatched. JDK then calls the default ObjectInputStream.resolveProxyClass(interfaces) implementation, which performs Class.forName(intf, false, latestUserDefinedLoader()) for EACH interface name and constructs the proxy class — bypassing the accepted classes list . ZDRES-233: Class.forName(name, initialize=true, classLoader) in readClassDescriptor Triggers Static Initialiser of Allow-Listed Classes Assessment: Fully addressed. For ANY class on the allow-list, deserialising a stream that names it triggers the class’s (static initialiser) BEFORE any instance is constructed. This means an attacker who supplies a class name on the allow-list (e.g., the developer wrote accept(“com.myapp.*") , attacker supplies com.myapp.SomeClass ) causes <clinit> of SomeClass — and many real-world classes have side-effecting static initialisers Both issues have been fixed.

  35. CVE-2026-48827 7.1 Élevée

    Apache Software Foundation Apache MINA SSHD · Apache mina sshd

    Path traversal vulnerability in Apache MINA SSHD bundle sshd-git. Lack of path validation in git-upload-pack, git-receive-pack, and other git operations allows users authenticated over SSH access to git repositories outside the configured git server root directory. Applications are affected if they use org.apache.sshd:sshd-git. Applications not using sshd-git are not affected. Users are advised to upgrade affected applications to Apche MINA SSHD 2.18.0, which fixes the issue. The issue also is present in the pre-release milestones 3.0.0-M1 to 3.0.0-M3 for a new upcoming new major version 3.0.0. Again, applications are affected only if they use sshd-git. Upgrade affected applications to 3.0.0-M4. We would like to point out that a professional git server should not rely solely on file system layout and permissions, but should implement additional security controls to govern access to git repositories and operations allowed on particular git repositories.

  36. CVE-2026-41017 5.9 Moyenne

    Apache Software Foundation Apache Airflow · Apache airflow

    Apache Airflow's `JWTRefreshMiddleware` set the JWT auth cookie without the `Secure` flag, so deployments running the Airflow API server behind an HTTPS-terminating reverse proxy (e.g. nginx / Envoy / a managed load balancer that terminates TLS and forwards plaintext to the API server, the default cloud-native topology) would have the user's session JWT replayed over any cleartext HTTP request to the same host. A network-positioned attacker (Wi-Fi MITM, hostile LAN, captive-portal proxy) could induce a logged-in user's browser to issue an HTTP request to the deployment's hostname and capture the JWT cookie out of that request, then replay it against the authenticated API. Affects deployments where the Airflow API server is reached through a TLS-terminating proxy and the cookie's secure-by-default protection is load-bearing for session integrity. Users are advised to upgrade to `apache-airflow` 3.2.2 or later.

  37. CVE-2026-34032 5.3 Moyenne

    Apache Software Foundation Apache HTTP Server · Apache http server

    Improper Null Termination, Out-of-bounds Read vulnerability in Apache HTTP Server. This issue affects Apache HTTP Server: through 2.4.66. Users are recommended to upgrade to version 2.4.67, which fixes the issue.

  38. CVE-2026-42779 9.8 Critique

    Apache Software Foundation Apache MINA · Apache mina

    The fix for CVE-2026-41635 was not applied to the 2.1.X and 2.2.X branches. Here was the original issue description: Apache MINA's AbstractIoBuffer.resolveClass() contains two branches, one of them (for static classes or primitive types) does not check the class at all, bypassing the classname allowlist and allowing arbitrary code to be executed. The fix checks if the class is present in the accepted class filter before calling Class.forName(). Affected versions are Apache MINA 2.1.0 <= 2.1.11, and 2.2.0 <= 2.2.6. The problem is resolved in Apache MINA 2.1.12, and 2.2.7 by applying the classname allowlist earlier. Affected are applications using Apache MINA that call IoBuffer.getObject(). Applications using Apache MINA are advised to upgrade.

  39. CVE-2026-42778 9.8 Critique

    Apache Software Foundation Apache MINA · Apache mina

    The fix for CVE-2026-41409 was not applied to the 2.1.X and 2.2.X branches. Here was the original issue description: The fix for CVE-2024-52046 in Apache MINA AbstractIoBuffer.getObject() was incomplete. The classname allowlist of classes allowed to be deserialized was applied too late after a static initializer in a class to be read might already have been executed. Affected versions are Apache MINA 2.1.0 <= 2.1.11, and 2.2.0 <= 2.2.6. The problem is resolved in Apache MINA 2.1.12, and 2.2.7 by applying the classname allowlist earlier. Affected are applications using Apache MINA that call IoBuffer.getObject(). Applications using Apache MINA are advised to upgrade The fix for CVE-2024-52046 in Apache MINA AbstractIoBuffer.getObject() was incomplete. The classname allowlist of classes allowed to be deserialized was applied too late after a static initializer in a class to be read might already have been executed. Affected versions are Apache MINA 2.1.0 <= 2.1.110, and 2.2.0 <= 2.2.6. The problem is resolved in Apache MINA 2.1.12, and 2.2.7 by applying the classname allowlist earlier. Affected are applications using Apache MINA that call IoBuffer.getObject(). Applications using Apache MINA are advised to upgrade

  40. CVE-2026-41409 9.8 Critique

    Apache Software Foundation Apache MINA · Apache mina

    The fix for CVE-2024-52046 in Apache MINA AbstractIoBuffer.getObject() was incomplete. The classname allowlist of classes allowed to be deserialized was applied too late after a static initializer in a class to be read might already have been executed. Affected versions are Apache MINA 2.0.0 <= 2.0.27, 2.1.0 <= 2.1.10, and 2.2.0 <= 2.2.5. The problem is resolved in Apache MINA 2.0.28, 2.1.11, and 2.2.6 by applying the classname allowlist earlier. Affected are applications using Apache MINA that call IoBuffer.getObject(). Applications using Apache MINA are advised to upgrade

  41. CVE-2026-41635 9.8 Critique

    Apache Software Foundation Apache MINA · Apache mina

    Apache MINA's AbstractIoBuffer.resolveClass() contains two branches, one of them (for static classes or primitive types) does not check the class at all, bypassing the classname allowlist and allowing arbitrary code to be executed. The fix checks if the class is present in the accepted class filter before calling Class.forName().  Affected versions are Apache MINA 2.0.0 <= 2.0.27, 2.1.0 <= 2.1.10, and 2.2.0 <= 2.2.5. The problem is resolved in Apache MINA 2.0.28, 2.1.11, and 2.2.6 by applying the classname allowlist earlier. Affected are applications using Apache MINA that call  IoBuffer.getObject(). Applications using Apache MINA are advised to upgrade.

  42. CVE-2026-40473 8.8 Élevée

    Apache Software Foundation Apache Camel Mina · Red Hat build of Apache Camel for Spring Boot 4 · Red Hat Fuse 7 · Apache camel

    The camel-mina component's MinaConverter.toObjectInput(IoBuffer) type converter wraps an IoBuffer in a java.io.ObjectInputStream without applying any ObjectInputFilter or class-loading restrictions. When a Camel route uses camel-mina as a TCP or UDP consumer and requests conversion to ObjectInput (for example via getBody(ObjectInput.class) or @Body ObjectInput), an attacker sending a crafted serialized Java object over the network to the MINA consumer port can trigger arbitrary code execution in the context of the application during readObject(). This issue affects Apache Camel: from 3.0.0 before 4.14.6, from 4.15.0 before 4.18.2, from 4.19.0 before 4.20.0. Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.6. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.2.