Veille CVE

Recherche « Apache Software Foundation Apache Camel Platform HTTP Main »

6 CVE

Critique 2 Élevée 2 Moyenne 2 Faible 0 Non évaluée 0 Exploitées (KEV) Tri : plus récentes « Apache Software Foundation Apache Camel Platform HTTP Main » ✕
  1. CVE-2026-85313 4.3 Moyenne

    Apache Software Foundation Apache Camel

    Permissive Cross-domain Policy with Untrusted Domains vulnerability in Apache Camel Jetty component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. Setting enableCORS on a Jetty endpoint installed Jetty's CrossOriginFilter with its stock defaults, which accept every origin and allow credentials. An operator asking for CORS therefore obtained a policy that lets a page on any origin make credentialed cross-origin requests to the endpoint and read the responses, without any indication that turning the option on had chosen an allow-all policy rather than an empty one to be filled in. This is the same defect class as the platform-http-vertx advisory published alongside it, in a different component. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. enableCORS no longer grants credentials to an origin the operator did not name. A deployment that relied on any origin being accepted must now list its origins explicitly. For deployments that cannot upgrade immediately, configure the CrossOriginFilter parameters explicitly rather than relying on what enableCORS installs, naming the allowed origins.

  2. CVE-2026-84176 6.5 Moyenne

    Apache Software Foundation Apache Camel

    Permissive Cross-domain Policy with Untrusted Domains vulnerability in Apache Camel Platform HTTP Vertx component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. createCorsHandler() set Access-Control-Allow-Credentials: true outside the origin check, so the header went out on every response to a request carrying an Origin header, including responses to origins the handler had just decided not to allow. When camel.server.cors.origins is unset, the handler treats every origin as allowed and echoes the caller's own Origin back as Access-Control-Allow-Origin. Together those produce the credentialed any-origin configuration that the fetch specification refuses to express as a literal wildcard, which is precisely why reflecting the origin is the usual way around that rule. A page on any origin could therefore make credentialed cross-origin requests to the Camel endpoint and read the responses. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Access-Control-Allow-Credentials is now sent only when the request origin matched an origin the operator actually configured. With no origin list the origin is still reflected, as before, but credentials are not granted, and Vary: Origin is now set whenever the origin is reflected so that a shared cache cannot serve one origin's response to another. For deployments that cannot upgrade immediately, set camel.server.cors.origins to the explicit list of origins that need access rather than leaving it unset.

  3. CVE-2026-66908 7.5 Élevée

    Apache Software Foundation Apache Camel · Apache camel

    Improper Authentication vulnerability in Apache Camel Platform HTTP Main component. This issue affects Apache Camel: from 4.8.0 before 4.22.0. The camel-main embedded HTTP server can protect its endpoints with JWT authentication, configured through authenticationEnabled together with the JWT keystore properties. JWTAuthenticationConfigurer.buildJwtOptions returned null when neither jwtIssuer nor jwtAudience was configured, and the caller then skipped the JWTAuthOptions.setJWTOptions call entirely, so the Vert.x JWTAuth instance was built from the keystore alone. The result was that inbound tokens were checked only for signature and expiry: the iss and aud claims were not validated at all. Nothing signalled this - the server started normally and reported no warning - so a deployment configured the documented way silently enforced less than the operator believed it had enabled, and the component documentation itself presented signature and expiry checking as the default with issuer and audience as an optional extra. Both the application server and the management server were affected, because the omission was in each of the two configureAuthentication paths. Any unexpired token signed by any key the configured keystore trusts was therefore accepted, regardless of which issuer minted it or which audience it was intended for. How far that reaches depends on the trust set of the keystore: where the signing key belongs to a shared or multi-tenant identity provider, a token legitimately issued for an entirely different audience is accepted, while a keystore holding a dedicated signer narrows it to reuse of tokens minted for other services within the same trust domain. The jwtIssuer and jwtAudience options did not exist before 4.21.0, so on earlier releases there was no supported way to have these claims enforced at all. Users are recommended to upgrade to version 4.22.0, which fixes the issue. From 4.22.0 the server refuses to start when a JWT keystore is configured but neither jwtIssuer nor jwtAudience is set, naming the properties involved, and a deployment that genuinely wants signature and expiry validation only must say so explicitly with the new jwtAllowMissingIssuerAndAudience option, which defaults to false. This behaviour is fixed only on 4.22.0. The 4.14.9 and 4.18.4 releases do not change the default: they add the jwtIssuer and jwtAudience options so that operators on those maintenance lines can enforce the claims by configuration, and an installation that upgrades to 4.14.9 or 4.18.4 without also setting at least one of those two properties is still accepting any unexpired token signed by a trusted key. Users on 4.14.x or 4.18.x should therefore upgrade to 4.14.9 or 4.18.4 and then set jwtIssuer, jwtAudience, or both. Releases from 4.8.0 up to and including 4.21.x offer no way to enforce these claims and should be moved to a version that does. Independently of version, restrict the JWT keystore to the smallest possible trust set - ideally a signer dedicated to this service rather than a shared identity-provider key - and where a gateway already validates issuer and audience in front of the server, ensure it cannot be bypassed. Notes: The JIRA ticket:  https://issues.apache.org/jira/browse/CAMEL-24281  refers to the various commits that resolved the issue, and has more details. The fail-closed guard could not be backported. The jwtIssuer and jwtAudience options were themselves only introduced in 4.21.0 by CAMEL-23525, so on camel-4.18.x and camel-4.14.x there was nothing an operator could set to satisfy the requirement and the guard would have broken every JWT deployment on those branches with no remedy available.

  4. CVE-2026-48205 9.1 Critique

    Apache Software Foundation Apache Camel DNS · Apache camel

    Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel DNS component. The camel-dns producers read DNS operation parameters - the resolver to query, the name or domain to look up, the record type and class, and the search term - from Exchange message headers whose constant values (DnsConstants.DNS_SERVER, DNS_NAME, DNS_DOMAIN, DNS_TYPE, DNS_CLASS, TERM) were the plain strings dns.server, dns.name, dns.domain, dns.type, dns.class and term. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a dns: producer, any HTTP client could therefore set the dns.server header to make the dig producer build a SimpleResolver pointing at an attacker-controlled DNS server - a server-side request forgery via DNS, through which the attacker observes the queried name and can return poisoned responses - and set the dns.name / dns.domain headers to resolve arbitrary internal hostnames, disclosing whether they exist (internal network reconnaissance). No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive DNS operations via the raw header names must use CamelDnsServer / CamelDnsName / CamelDnsDomain / CamelDnsType / CamelDnsClass / CamelDnsTerm instead of the dns.* / term names. For deployments that cannot upgrade immediately, strip the dns.* and term headers from any untrusted ingress before the dns: producer, and set the DNS server and lookup parameters from a trusted source in the route.

  5. CVE-2026-40682 9.1 Critique

    Apache Software Foundation Apache OpenNLP · Red Hat build of Apache Camel for Spring Boot 4 · Red Hat Data Grid 8 · Red Hat Fuse 7

    XML External Entity (XXE) via Unsanitized Dictionary Parsing in Apache OpenNLP DictionaryEntryPersistor Versions Affected: before 2.5.9, before 3.0.0-M3 Description: The DictionaryEntryPersistor class initializes a static SAXParserFactory at class-load time without enabling FEATURE_SECURE_PROCESSING or disabling DTD processing. When create(InputStream, EntryInserter) is invoked, the only feature set on the XMLReader is namespace support — external entity resolution and DOCTYPE declarations remain fully enabled. An attacker who can supply a crafted dictionary file (e.g., a stop-word list or domain dictionary) containing a malicious DOCTYPE declaration can trigger local file disclosure via file:// entity references or server-side request forgery via http:// entity references during SAX parsing, before the application processes a single dictionary entry. This is inconsistent with the project's own XmlUtil.createSaxParser() helper, which correctly sets FEATURE_SECURE_PROCESSING and disallow-doctype-decl and is used by all other XML parsing paths in the codebase. The public Dictionary(InputStream) constructor delegates directly to this method and is the documented API for loading user-supplied dictionaries, making untrusted input a realistic scenario. Mitigation: 2.x users should upgrade to 2.5.9. 3.x users should upgrade to 3.0.0-M3. Users who cannot upgrade immediately should ensure that all dictionary files are sourced from trusted origins and should consider wrapping the Dictionary(InputStream) constructor with input validation that rejects any XML containing a DOCTYPE declaration before it reaches the parser.

  6. CVE-2026-40022 8.2 Élevée

    Apache Software Foundation Apache Camel Platform HTTP Main · Red Hat build of Apache Camel 4.18.1 for Spring Boot 3.5.14 · Red Hat OpenShift Serverless · Red Hat build of Apache Camel 4 for Quarkus 3

    When authentication is enabled on the Apache Camel embedded HTTP server or embedded management server (camel-platform-http-main) and a non-root context path such as /api or /admin is configured via camel.server.path or camel.management.path, the BasicAuthenticationConfigurer and JWTAuthenticationConfigurer classes derive the authentication path from properties.getPath() when camel.server.authenticationPath / camel.management.authenticationPath is not explicitly set. Combined with the Vert.x sub-router mounting model - the sub-router is mounted at _path_* and the authentication handler is registered inside the sub-router at the resolved path - this causes the authentication handler to match only the exact configured context path, not its subpaths. Unauthenticated requests to subpaths such as /api/_route_ or /admin/observe/info therefore reach protected business routes and management endpoints without being challenged for credentials. The /observe/info endpoint can disclose runtime metadata such as the user, working directory, home directory, process ID, JVM and operating system information. This issue affects Apache Camel: from 4.14.1 before 4.14.6, from 4.18.0 before 4.18.2. Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, they are suggested to upgrade to 4.14.6. If users are on the 4.18.x LTS releases stream, they are suggested to upgrade to 4.18.2.