Recherche « ISC BIND 9 »

CVE-2026-79980 5.6 Moyenne 23/10/2026 22:17

zephyrproject zephyr

The DHCPv4 client in subsys/net/lib/dhcpv4/dhcpv4.c maintained its transaction identifier (iface->config.dhcpv4.xid) as a counter rather than as a per-transaction random value. It was seeded once with sys_rand32_get() in dhcpv4_start_internal(), incremented by one in dhcpv4_send_discover() and dhcpv4_send_decline(), and never changed by dhcpv4_send_request() — so every RENEWING and REBINDING exchange reused, unchanged, the identifier that had already appeared on the wire in the broadcast DHCPDISCOVER at boot, and where the identifier did move it moved predictably by one. RFC 2131 4.1 requires a single identifier per transaction, chosen so that clients are unlikely to collide. This identifier is the client's only unpredictable reply-validation token. net_dhcpv4_input() accepts a BOOTP reply on op, a matching xid, and a matching chaddr (the interface MAC, which is public); the UDP callback is registered with a wildcard remote address and port, and no server-identifier or source-address check is applied. An attacker who learns one identifier — for example any host on the same segment that sees the broadcast DHCPDISCOVER, or a DHCP server or relay on a network the device previously joined — therefore retains a valid token for the device's whole uptime, and can predict the identifiers of later exchanges, without having to observe the unicast renew traffic or race the legitimate server. A forged reply that passes those checks has effect regardless of client state, because dhcpv4_parse_options() applies its side effects before the state machine gate in dhcpv4_handle_reply(): the router option calls net_if_ipv4_set_gw() and the DNS option calls dns_resolve_reconfigure(). A single accepted datagram can thus repoint the device's default gateway and resolvers at attacker-controlled addresses, redirecting its traffic; during RENEWING or REBINDING a forged DHCPACK re-binds the lease with attacker-chosen parameters and a forged DHCPNAK removes the address and restarts configuration. The fix draws a fresh sys_rand32_get() value at each point where a transaction begins — entering SELECTING, RENEWING and REBINDING, and at the INIT/INIT-REBOOT entry taken when an interface with a lease goes down — while REQUESTING and DECLINE keep the identifier of the exchange they belong to, as RFC 2131 requires. As a side effect the client also no longer discards a slow server's offer after retransmitting a discover, and the initial-discover backoff now draws its own randomness instead of deriving it from the identifier.

CVE-2026-93631 7.1 Élevée 23/10/2026 16:17

Zimbra Collaboration Suite

A cross-site request forgery vulnerability in the OAuth extension of Zimbra Collaboration Suite (ZCS) Network Edition allows an attacker to link an attacker-controlled external account to a victim's mailbox. The OAuth callback does not bind its state value or authorization code to the initiating Zimbra session and instead selects the destination mailbox from the browser's current authentication cookie. On a deployment with the provider configured, an attacker can induce a signed-in victim to load a callback containing a fresh code for the attacker's provider account. This creates a persistent data source that imports attacker-controlled contacts or events. With bidirectional CalDAV synchronization, appointments subsequently created or edited in the linked calendar are also disclosed to the attacker. ZCS 10.1.16 and 10.1.20 are affected.

CVE-2026-98993 7.8 Élevée 23/10/2026 15:17

Linux

In the Linux kernel, the following vulnerability has been resolved: namespace: don't inherit MNT_UMOUNT in clone_mnt() MNT_UMOUNT gets raised on a mount that umount_tree() or umount_one() has taken out of its namespace. It's never cleared. __detach_mounts() unhooks a mount that carries it instead of unmounting it. disconnect_mount() lets an unmounted child stay attached only if its parent carries it. propagate_umount() takes it as the sign that a mount is going to be unmounted when it decides what else can be unmounted, where a chain of locked mounts ends and where a for reparenting an overmount. clone_mnt() copies the flags of the source and only masks MNT_INTERNAL_FLAGS which doesn't include MNT_UMOUNT. A mount that was lazily unmounted but is kept alive by a file descriptor can still be copied when its root is an nsfs or pidfs file because may_copy_tree() accepts those before checking whether the source is mounted at all: mount --bind /proc/self/ns/net /tmp/x exec 3< /tmp/x umount -l /tmp/x mount --bind /proc/self/fd/3 /tmp/y The mount on /tmp/y is attached to the caller's namespace with MNT_UMOUNT already set and every copy of it inherits the flag again. That causes a number of bugs: - Unlink its mountpoint from a mount namespace where it isn't one. __detach_mounts() takes it for a mount that was unmounted earlier, unhooks it from its parent and drops the reference the namespace holds on it. It stays in the namespace with one reference too few and as its own parent, so it can't be unmounted through the file descriptor anymore and the namespace never finds it again. When the namespace goes away it's leaked and points to a freed struct mnt_namespace that may_change_propagation() and anon_ns_root() read on the next propagation change or mount_setattr() through the file descriptor. - Make it shared and unmount a peer. trace_transfers() follows the flag from the peer into it and strips it from its peer group. - Let a propagated umount reach it. gather_candidates() marks it with T_UMOUNT_CANDIDATE but never puts it on the candidate list, so the mark is never cleared and every later propagated umount skips it. If it's the parent of a locked mount handle_locked() takes it as the cutoff and commits the locked child that should have stayed and disconnect_mount() leaves that child attached to it, unmounted under a mounted parent, which is what disconnect_mount() exists to prevent. When the namespace goes away umount_tree() visits the child a second time. And once __detach_mounts() has made it its own parent reparent() never finds the end of the chain of unmounted parents. A clone is a new mount that has never been unmounted. Add MNT_UMOUNT to MNT_INTERNAL_FLAGS so clone_mnt() never copies it. And warn when umount_tree() reaches a mount that already has it set.

CVE-2026-98870 8.8 Élevée 23/10/2026 14:18

Linux

In the Linux kernel, the following vulnerability has been resolved: ksmbd: remove stale channels from all sessions on teardown ksmbd_sessions_deregister() removes a connection's channels from other sessions' channel lists only while conn->binding is still set: if (conn->binding) { hash_for_each_safe(sessions_table, ...) ksmbd_chann_del(conn, sess); } conn->binding is a transient flag: it is cleared once a binding SESSION_SETUP completes, and also by a subsequent non-binding SESSION_SETUP on the same connection (a reauthentication on a bound channel, or a new SessionId==0 setup). A connection that has bound a channel into another session's ksmbd_chann_list and then clears conn->binding leaves that channel behind when it disconnects: the channel, whose chann->conn points at the now freed struct ksmbd_conn, stays on the owner session's list. When the owning connection later tears down, the second loop dereferences the stale channel: xa_for_each(&sess->ksmbd_chann_list, chann_id, chann) if (chann->conn != conn) ksmbd_conn_set_exiting(chann->conn); /* freed */ which is a use-after-free write into the freed ksmbd_conn (the same stale channel is also walked by show_proc_session() through /proc). The session is leaked as well, because its channel list never empties. Remove the conn->binding gate so a connection always removes its channels from every session on teardown.

CVE-2026-97313 7.5 Élevée 21/10/2026 15:21

ISC BIND 9

A recursive BIND server that receives a query with recursion desired (RD=1) followed by a non-recursive query (RD=0) may exit with an assertion failure, resulting in a denial of service. To be vulnerable, the BIND server must allow recursive queries and have at least two RPZ zones configured: one with the default setting of "recursive-only yes", and the other with "recursive-only no". This issue affects BIND 9 versions 9.16.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1.

CVE-2026-96888 7.5 Élevée 21/10/2026 15:21

ISC BIND 9

A BIND resolver that is configured with both a "redirect" zone and "qname-minimization strict" may abort with an assertion failure while processing the redirect. This issue affects BIND 9 versions 9.16.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.16.8-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1.

CVE-2026-94300 8.1 Élevée 21/10/2026 15:21

ISC BIND 9

Replaying GSS-TSIG signed UDP messages can result in memory corruption in "`named`". An attacker who can capture a previously signed UDP message can replay it while the negotiated TSIG key is still valid. By also sending crafted queries to a zone the attacker controls, the attacker may potentially achieve remote code execution. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1.

CVE-2026-19630 7.5 Élevée 21/10/2026 15:18

ISC BIND 9

In a BIND resolver, inbound DNS protocol messages with a particular structure will result in additional processing, with no limit imposed by BIND. A DNS message with a maliciously large number of such structures will cause BIND to consume disproportionate amounts of CPU time and memory during processing. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1.

CVE-2026-111761 5.8 Moyenne 20/10/2026 17:17

a2aproject a2a-java

A2A Java SDK is the official Java SDK for the Agent2Agent (A2A) Protocol. Prior to 1.3.0.Final, BasePushNotificationSender in server-common sends task data to the URL in TaskPushNotificationConfig without destination validation, scheme restrictions, or bounds on redirects. InMemoryPushNotificationConfigStore.setInfo stores the URL verbatim, and onCreateTaskPushNotificationConfig does not validate the destination. In the default deployment with push notifications enabled, an unauthenticated caller can register a destination through an inline SendMessage configuration or CreateTaskPushNotificationConfig for an existing task, causing task status and artifact updates to send requests from the server's network position to loopback, private, link-local cloud-metadata, IPv6 unique-local, unspecified, or multicast destinations where routing permits. JdkA2AHttpClient and VertxA2AHttpClient follow redirects, allowing a webhook redirect to bypass creation-time destination checks and convert a POST into a GET; hostname-only checks also do not prevent DNS rebinding. Direct POST delivery can push attacker-influenced task data into internal services, whereas a redirected POST-to-GET request drops the body. The sender discards the fetched response and does not expose delivery success or failure, so the demonstrated behavior does not provide response read-back. No credentials or user interaction are required. This issue is fixed in version 1.3.0.Final.

CVE-2026-86467 – Non évaluée 20/10/2026 05:17

Apache Software Foundation Apache Airflow Amazon provider

Apache Airflow Amazon provider: the AWS auth manager's SAML login flow does not bind the authentication response to the browser that began it. The login handler discards the AuthnRequest ID and the callback validates the assertion without requiring a matching InResponseTo, so an unauthenticated attacker who can cause a victim to load a page can complete a SAML login in the victim's browser using the attacker's own assertion, silently logging the victim into the attacker's Airflow account. Subsequent work the victim performs lands in a session the attacker controls. Affects deployments using the AWS auth manager with SAML authentication. The victim needs only to visit an attacker-controlled page; no Airflow account or credential is required of the attacker. This is the same login-CSRF class fixed in the Keycloak auth manager as CVE-2026-40948. Users of apache-airflow-providers-amazon are recommended to upgrade to version 9.38.0, which fixes the issue.

CVE-2026-103091 9.3 Critique 19/10/2026 05:16

Google SAM

Missing Authorization (CWE-862) and Initialization of a Resource with an Insecure Default (CWE-1188) in the MCP proxy (HandleStreamPassThrough in mcp_service.go) and OIDC registration flow (GET /info and POST /register in internal/controlplane/server.go) in Google OSS Agent Mesh (SAM) versions 0.1.0-alpha.1 through 0.1.0-alpha.8 allow a remote attacker to self-enroll into the mesh and invoke arbitrary tools across all connected MCP backend nodes. Because GET /info publicly discloses OIDC configuration, POST /register auto-enrolls any valid OIDC token holder without claim filtering or ban checks, and the default policy binds sam:system:authenticated to wildcard services and targets, an attacker can obtain a mesh credential with full read, write, and execution access on backend services. Users should upgrade to version 0.1.0-alpha.9 or later, which enforces a fail-closed default policy, explicit policy-binding requirements on enrollment, and ban checks.

CVE-2026-98734 – Non évaluée 18/10/2026 18:17

Linux

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize SCO and ISO scheduling with teardown hci_low_sent() selects a connection under RCU but drops the read lock before calculating its quota and returning it to the scheduler. The connection is then used without lifetime protection by hci_sched_iso() and hci_sched_sco(). After the TX worker drops the RCU read lock, hci_abort_conn_sync() on hdev->req_workqueue can remove the connection from the hash, complete synchronize_rcu(), purge its queues and release it. The TX worker on hdev->workqueue can then access the freed connection in hci_quote_sent() or while dequeuing packets and updating conn->sent. KASAN reported: BUG: KASAN: slab-use-after-free in hci_low_sent+0x730/0x840 Workqueue: hci0 hci_tx_work Call Trace: hci_low_sent+0x730/0x840 hci_sched_iso+0x25e/0x4d0 hci_tx_work+0x239/0xcb0 Allocated by task 93: __hci_conn_add+0x16f/0x1b40 hci_bind_bis+0x782/0x17b0 hci_connect_bis+0xa0/0x510 iso_sock_connect+0x589/0x1050 Freed by task 88: kfree+0x131/0x3c0 device_release+0xc8/0x240 kobject_put+0x14d/0x280 hci_conn_del+0x55a/0xe80 hci_disconnect_sync+0x156/0x180 hci_abort_conn_sync+0x3e7/0x940 hci_cmd_sync_work+0x13c/0x290 Hold hci_dev_lock() across connection selection and transmission in both SCO and ISO scheduling, serializing them with connection teardown. This also prevents queuing completion timestamps after the connection queues have been purged. Extending RCU across transmission would be unsafe because the transmit path can sleep. Keep the ISO timeout check outside the mutex since hci_link_tx_to() takes it itself. The preceding channel fix already holds this mutex in the ACL and LE schedulers, which call the SCO scheduler between packets. Move the SCO body to __hci_sched_sco(), assert that its caller holds the mutex, and use it directly from these locked paths. Keep a locking hci_sched_sco() wrapper for the direct calls from hci_tx_work(). This avoids recursively acquiring the device mutex while preserving the scheduling order. Remove the obsolete claim that connection removal disables TX.

CVE-2026-98616 – Non évaluée 18/10/2026 18:17

Linux

In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: reset num_napi when the napi vectors are freed fbn->num_napi is the count of live napi vectors, each of which owns an IRQ. The PM path had freed them without clearing the count. fbnic_pm_suspend() tears the datapath down via ndo_stop() and frees the IRQs, but leaves netif_running() true so resume knows to re-open. Resume rebuilds the datapath in __fbnic_pm_resume() and fbnic_reset_queues() sets num_napi and __fbnic_open() re-allocates the vectors. When the datapath is torn down but never rebuilt, num_napi is left pointing at freed vectors under 2 different scenarios: - a PCIe error recovery that fails (fbnic_err_slot_reset() -> __fbnic_pm_resume() returns an error -> PCI_ERS_RESULT_DISCONNECT), so .resume never runs; or - an __fbnic_open() that fails partway on resume and unwinds, freeing the vectors after fbnic_reset_queues() has already set num_napi. The netdev is then running with num_napi > 0 but napi[] freed, and the eventual remove/unbind close re-enters fbnic_down() -> fbnic_dbg_down() and dereferences the freed vectors: BUG: kernel NULL pointer dereference, address: 0000000000000210 RIP: fbnic_dbg_down+0x28 Clear num_napi when the vectors are freed: in the suspend teardown (a good resume re-establishes it before __fbnic_open()) and on the resume open failure. A redundant ndo_stop() then walks an empty napi[]. The normal ndo_stop() down/up cycle is untouched and keeps num_napi for the next ndo_open().

CVE-2026-98610 – Non évaluée 18/10/2026 18:17

Linux

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_hfsc: bound the classify inner-filter walk with a drift budget hfsc_classify() applies the "filter may only point downwards" level check only when the filter result carries no bound class. A filter created with a flowid gets res.class set once at bind time, so the check never runs for it during classification. hfsc_adjust_levels() can later raise a class's level without revalidating existing bindings, leaving two binds that were each legal at bind time pointing at each other; the classify walk then bounces between two interior classes forever with the qdisc lock held and BH disabled — a soft lockup from a single packet. The stuck walk trips the watchdog: watchdog: BUG: soft lockup - CPU#3 stuck for 13s! [ping:444] RIP: 0010:u32_classify+0x542/0x17f0 ... tcf_classify+0x66/0xa0 hfsc_enqueue+0x166/0xdf0 Bound the traversal with a budget of non-descending hops, the only way a configured walk can move without descending the class tree once levels drift after bind time. The budget is cumulative over the whole walk and is deliberately not reset on a descending hop: a chain that alternates a descent with a lateral hop would return the budget every lap and never trip. Descending hops never decrement it, so legitimately deep trees are unaffected and a terminating lateral chain still classifies normally. Drop the packet with a rate-limited warning once the budget is exhausted, mirroring the merged HTB fix. This is a follow-up to commit 729c4896ab82 ("net/sched: sch_htb: limit htb_classify inner-class filter hops"), which bounded the same classify loop on the HTB side but left the HFSC walk unbounded. Conditions to recreate the bug: - CONFIG_NET_SCHED, CONFIG_NET_SCH_HFSC, CONFIG_NET_CLS_U32, CONFIG_LOCKUP_DETECTOR. - Build a cycle with two legal-at-bind-time flowid binds and a level drift: class X 1:1 (child of root) with leaf child 1:10; class Y 1:2 (sibling of X) with children 1:20 and 1:200; root u32 filter flowid 1:1; filter on X flowid 1:2 (legal when Y is a leaf); after Y's level rises to 2, filter on Y flowid 1:1 (legal then). Send one packet (ping on the device). Unfixed kernel: classify spins with the qdisc lock held; with softlockup_panic=1 it panics. - Reachable from unprivileged user via unshare -Urn (CAP_NET_ADMIN).

CVE-2026-98595 – Non évaluée 18/10/2026 18:17

Linux

In the Linux kernel, the following vulnerability has been resolved: udp: remove a disconnected socket from the 4-tuple hash table A UDP socket bound to a specific address and port keeps its entry in the 4-tuple hash table after it is disconnected: sk binds to 127.0.0.1:21001 sk connects to 127.0.0.2:20001 // filed in the 4-tuple table sk disconnects, connect(AF_UNSPEC) // still filed, peer now 0.0.0.0:0 __udp_disconnect() takes a socket out of that table only as a side effect of ->rehash() or ->unhash(), and it skips ->rehash() when SOCK_BINDADDR_LOCK is set and ->unhash() when SOCK_BINDPORT_LOCK is set. commit 6996a2d2d0a6 ("udp: Unhash auto-bound connected sk from 4-tuple hash table when disconnected.") fixed the same end state for a wildcard-bound socket, by a path this one does not take. The entry is counted whether or not anything hits it. hash4_cnt on the hash2 slot stays raised for as long as the socket lives, so udp_has_hash4() keeps sending every packet for that address and port through the 4-tuple lookup first. On IPv6 it can also be hit. __udp_disconnect() does not clear sk_v6_daddr, so udp_v6_rehash() files the entry under the peer the socket was connected to with a zero dport, and inet6_match() compares that same field: a datagram from the former peer with a zero source port matches, and source port zero is accepted on receive. On IPv4 the peer is cleared, so a match would need a zero source address as well, which the routing layer rejects as martian. The stale sk_v6_daddr is a separate defect, not addressed here; removing the entry closes this path either way. The entry can also be relocated. __udp_disconnect() clears sk_bound_dev_if, so a subsequent SO_BINDTODEVICE calls ->rehash(), and because the receive address is still specific udp_lib_rehash() moves the entry instead of removing it, into the bucket that (rcv_saddr, num, 0, 0) hashes to -- a pure function of the address and port, so every socket reaching this state on one address and port collects in one bucket. The bucket cannot be chosen from outside, as udp_ehashfn() is seeded with a per-boot secret. This last one became reachable only with commit 644f9108f3a5 ("udp: Make rehash4 independent in udp_lib_rehash()"), which moved the hash4 handling out of a branch a disconnected socket does not take; the stale entry itself dates from the commit in Fixes. Take the socket out of the table before __udp_disconnect() runs, while it still matches how it was filed. This also reaches the wildcard case ahead of udp_lib_rehash()'s udp_unhash4() branch, leaving that branch unreachable from udp_disconnect(); removing it belongs in net-next. udp_disconnect() and udp_abort() are the only UDP entries into __udp_disconnect(), which is shared with raw, ping and l2tp sockets that are not struct udp_sock: ping_prot.obj_size is sizeof(struct inet_sock), so udp_hashed4() on one would read past the allocation.

CVE-2026-98459 – Non évaluée 18/10/2026 18:16

Linux

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: balance the parent hold in hci_bind_bis() hci_conn_link() takes a lifetime reference to its parent with hci_conn_get(), but only takes an operational hold on the child. hci_conn_unlink() later balances both a hold and a reference on the parent. The SCO and CIS paths pass a parent acquired from a connect helper, so it already has a hold. For an additional BIS, hci_bind_bis() obtains the parent from hci_conn_hash_lookup_big(), which returns a bare pointer. Unlinking the child then drops the parent's existing hold and can schedule it for disconnection while its socket is still using it. Take a hold on the parent before linking it and drop that hold if linking fails. A successful link transfers the hold to hci_conn_unlink().

CVE-2026-19601 4.9 Moyenne 16/10/2026 09:17

Mattermost

Mattermost versions 11.9.x <= 11.9.1, 11.8.x <= 11.8.5, 11.7.x <= 11.7.10, 11.10.x <= 11.10.1 fail to invalidate the stored AD/LDAP bind password when other connection settings (such as the server address) are changed, which allows a System Console administrator to disclose the plaintext bind password to an attacker-controlled server via the Test Connection / diagnostics feature. Mattermost Advisory ID: MMSA-2026-00764

CVE-2026-55239 8.8 Élevée 15/10/2026 21:17

msgbyte tianji

Tianji is an open source analytics, uptime monitoring, and server status platform. Prior to 1.31.29, the getDateQuery() function in src/server/utils/prisma.ts constructs raw SQL through Prisma.sql() by interpolating the timezone request value without parameter binding. The timezone value can reach affected analytics queries through request data or the timezone HTTP header, and workspaceProcedure permits any authenticated workspace member, including a read-only viewer, to reach those queries. An attacker can execute arbitrary SQL against the shared PostgreSQL database, which can disclose or modify credentials, API keys, and tenant data or make the service unavailable. This issue is fixed in version 1.31.29.

CVE-2026-89140 6.0 Moyenne 12/10/2026 21:16

Temporal Technologies, Inc. Temporal Server

Temporal Server does not bind internal completion callbacks to the namespace that attached them, which allows an authenticated caller with write permission in one namespace to alter Scheduler V2 schedule state in another namespace. The callback address temporal://internal is reserved for callbacks that Scheduler V2 attaches to the Workflows it starts. In affected releases, any authenticated caller could attach a callback with that address to a Workflow start request, the address was exempt from the component.callbacks.allowedAddresses allowlist, and the History service delivered the callback to the component its token named, in whatever namespace that was, without authorizing the original caller there. When the forged completion matches an action a target schedule is running, the schedule records the action as completed while its Workflow still runs, which can defeat an overlap policy such as SKIP, and passes caller-controlled data to the next scheduled Workflow as its last completion result. A forged failure may also pause a schedule configured to pause on failure. A forgery requires the target namespace identifier, the schedule identifier, and the identity and timing of a running action. No disclosure of Workflow payloads or history was identified. Only namespaces that hold Scheduler V2 schedules can be targeted; Scheduler V2 is off by default, and existing Scheduler V2 schedules remain targets after the settings that create them are turned off.

CVE-2026-109239 5.3 Moyenne 12/10/2026 19:17

unclecode crawl4ai

Crawl4AI before 0.9.4 contains a blind server-side request forgery vulnerability in RobotsParser.can_fetch that lets unauthenticated attackers bypass Docker server egress controls. Attackers can enable check_robots_txt and use redirects or DNS rebinding to reach internal, loopback, or cloud-metadata addresses for service discovery.

CVE-2026-107292 6.4 Moyenne 08/10/2026 19:17

pydantic-ai · pydantic-ai-slim · Pydantic pydantic ai

Pydantic AI is a Python agent framework for building applications and workflows with Generative AI. From 1.34.0 until 2.30.0, the Agent.to_web() and clai web development chat server does not validate the Host header, allowing a website visited by a developer to use DNS rebinding to reach a loopback-hosted agent as a same-origin service. The hostile page can read the served UI and submit chat requests that execute agent tools with the local process's privileges and credentials, causing data disclosure or unwanted side effects. Binding to localhost, Origin checks, and CSRF tokens do not prevent the same-origin DNS rebinding path. This issue is fixed in versions 1.107.5 and 2.30.0.

CVE-2026-98276 7.8 Élevée 06/10/2026 11:18

Linux

In the Linux kernel, the following vulnerability has been resolved: net: lock the socket in sock_gettstamp() sk->sk_flags must only be changed while holding the socket lock, because sock_set_flag() and sock_reset_flag() use non atomic operations (__set_bit() and __clear_bit()). sock_gettstamp() is one of the last places where a bit of sk->sk_flags is changed from a syscall without owning the socket lock, through sock_enable_timestamp(sk, SOCK_TIMESTAMP). sk_set_memalloc() and sk_clear_memalloc() also change sk->sk_flags without the socket lock, but their callers (nbd, iscsi_tcp, nvme-tcp, sunrpc, wireguard) need a careful audit, this will be addressed in a separate patch. Jungwoo Lee and Wongi Lee reported an UDP socket use-after-free caused by this bug: a SIOCGSTAMPNS_NEW ioctl racing with bind() can cancel the SOCK_RCU_FREE bit that udp_lib_get_port() just set, because both threads perform a read-modify-write on the same word. CPU 0 (bind) CPU 1 (SIOCGSTAMPNS_NEW) -------------------------------- ---------------------------- read sk_flags = F read sk_flags = F compute F | BIT(SOCK_RCU_FREE) compute F | BIT(SOCK_TIMESTAMP) store F | BIT(SOCK_RCU_FREE) sk_add_node_rcu(sk, ...) store F | BIT(SOCK_TIMESTAMP) After the lost update, SOCK_RCU_FREE is clear while the socket is visible to lockless UDP receive lookups. sk_destruct() then frees the socket immediately instead of waiting for a RCU grace period, while the receive path still holds a reference-less pointer to it: BUG: KASAN: slab-use-after-free in ipv4_pktinfo_prepare+0x30/0x410 Read of size 8 at addr ffff888008806610 by task exploit/207 CPU: 0 UID: 1000 PID: 207 Comm: exploit Not tainted 6.12.95+ #1 ipv4_pktinfo_prepare+0x30/0x410 udp_queue_rcv_one_skb+0x51c/0x1180 udp_unicast_rcv_skb+0x109/0x350 ip_protocol_deliver_rcu+0x14b/0x310 ip_local_deliver_finish+0x29d/0x390 ip_local_deliver+0x24d/0x2a0 Only grab the socket lock when SOCK_TIMESTAMP has to be set, to keep the common case lockless.

CVE-2026-86345 9.0 Critique 02/10/2026 02:17

Red Hat Directory Server 11 · Red Hat Directory Server 12 · Red Hat Directory Server 13 · Red Hat Enterprise Linux 10

A flaw was found in 389-ds-base. The server does not discard plaintext bytes already buffered from a client connection when negotiating StartTLS, allowing an on-path attacker to inject a crafted LDAP message that is processed after the TLS upgrade and whose response is delivered to the client in place of the client's own pending operation's response, due to messageID collision. This can cause a client application to treat a failed authentication (bind) attempt as successful.

CVE-2026-104059 8.1 Élevée 01/10/2026 21:17

lektor

Lektor 3.3.14 and 3.4.0b15 contains a cross-site request forgery vulnerability in the admin API blueprint that allows unauthenticated attackers to perform state-changing actions by sending cross-origin requests without CSRF tokens, Origin/Referer validation, CORS configuration, or Host allowlisting. Attackers can exploit the newattachment, deleterecord, build, clean, and publish endpoints from a malicious web page to write arbitrary files, delete pages, wipe build output, trigger deployment publication, and via DNS rebinding reach read endpoints to disclose data.

CVE-2026-104056 9.8 Critique 01/10/2026 21:17

Authlib

Authlib version 1.7.2 and below contains a vulnerability where discovery JSON metadata is cached without validation or issuer-origin binding. This allows a poisoned discovery response to replace all endpoint values with attacker-controlled values rather than endpoint URLs that share the origin of the configured server metadata URL.

CVE-2026-103237 8.3 Élevée 30/09/2026 12:17

MISP

MISP contains an improper input validation vulnerability in its ORM save path. When a user submits data through various endpoints (attribute add/edit, event edit, free-text import, sighting capture, shadow attribute proposal, event report creation, object reference add, user admin edit), the application sanitizes the flat record by stripping the primary key and pinning the event_id or object_id to the caller's context. However, the underlying ORM's set() method gives priority to a nested key whose name matches the model alias and discards the outer scalar fields. An authenticated user with basic write permissions can exploit this by embedding a nested block under the model alias key inside their request. The sanitization logic (id removal, event_id pinning) is applied to the outer record, but the ORM binds to the inner record instead, which carries an attacker-chosen id and event_id. This allows the attacker to overwrite, re-parent, or soft-delete rows belonging to other organizations or events they have no read access to. Impact: - Cross-tenant data integrity compromise (attribute values rewritten, objects re-parented to attacker events, rows soft-deleted) - Affects multiple entity types: Attribute, Object, EventReport, Sighting, AttributeTag, ShadowAttribute - Requires only a low-privilege authenticated account with perm_add Affected versions: <2.5.48

CVE-2026-79537 9.1 Critique 29/09/2026 22:17

metatool-ai MetaMCP through 2.4.22 contains an insecure direct object reference (IDOR) in the MCP transport session dispatch. The session store (getSession in session-lifetime-manager.ts) is keyed only by the client-supplied mcp-session-id header with no owner, namespace, or endpoint binding, and the per-endpoint authorization middleware validates only the URL endpoint's owner, never the session. An attacker who supplies another tenant's session id " obtained without authentication from GET /metamcp/health/sessions, which discloses active session IDs and namespace UUIDs " can list and execute the victim tenant's private MCP tools and exfiltrate their data using the victim's forwarded credentials.

CVE-2026-100601 5.3 Moyenne 26/09/2026 16:16

openclaw clawhub

ClawHub (openclaw/clawhub) application/backend contains a server-side request forgery vulnerability in the public profile preview's image fetching. The preview accepts a user-supplied image URL and checks the textual hostname against private-address patterns, but does not validate or pin the resolved network destination, so a public-looking hostname can resolve to an internal address or change resolution between validation and connection (DNS rebinding). A maintainer-run local harness demonstrated an outbound connection to an owner-controlled loopback listener; access to production internal services, credential disclosure, and code execution were not demonstrated. The issue was confirmed at revision cbfee7343ddc867316dd9b3de6fa8856730f9f41; the complete historical affected range was not established. Fixed by PR #3683, included in revision 8c2de6c506bb4efabe3f0c2ffb8370b9e23d4650, which was deployed to clawhub.ai on 2026-09-11; self-hosted deployments should update to that revision or a later descendant. The npm CLI and OpenClaw runtime are separate products and are not affected.

CVE-2026-100567 8.2 Élevée 26/09/2026 05:17

OpenClaw

OpenClaw is an agent gateway distributed as the npm package 'openclaw'. In versions >= 2026.4.5 and < 2026.8.1, the Gateway validated a single DNS resolution result for a configured remote Chrome DevTools Protocol (CDP) hostname, but the raw WebSocket and Playwright transports performed a later, independent DNS resolution, discarding the DNS pinning enforced at validation time. An attacker who controls an approved CDP hostname or its DNS answers can exploit this check-then-use gap via DNS rebinding to make the Gateway connect to a loopback, private, link-local, cloud metadata, or other SSRF-policy-denied address. The impact depends on the remote CDP configuration, DNS timing, and the services reachable from the Gateway host. The issue is fixed in 2026.8.1; as a mitigation, disable hostname-based remote CDP endpoints or restrict them to trusted, stable infrastructure.

CVE-2026-98017 7.8 Élevée 25/09/2026 13:17

Linux

In the Linux kernel, the following vulnerability has been resolved: net/sched: defer qdisc freeing after failed creation An RTM_NEWQDISC request can make clsact bind a populated shared ingress block during ->init(), publishing an embedded mini_Qdisc to lockless readers. If the same request has an invalid TCA_RATE, estimator setup fails after ->init(); the unwind removes the pointer but synchronously frees its containing qdisc while tc_run() may still hold it. Retire failed qdiscs through the same RCU helper as normal destruction. Inline the synchronous free into the callback now that no direct callers remain.

CVE-2026-97846 6.8 Moyenne 25/09/2026 09:16

Red Hat Build of Keycloak · Red Hat Single Sign-On 7

Keycloak provides a feature called mTLS holder-of-key binding which ensures that a token can only be used by the client that originally requested it by binding it to their digital certificate. A flaw was discovered where the new Standard Token Exchange V2 feature does not check for this certificate. This allows an attacker with stolen client credentials to obtain a standard, unrestricted token that bypasses these security protections.

CVE-2026-92829 4.3 Moyenne 25/09/2026 09:16

pr-gateway Blog2Social: Social Media Auto Post & Scheduler

The Blog2Social: Social Media Auto Post & Scheduler plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 9.1.0. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with contributor-level access and above, to view, modify, or delete other users' Blog2Social records, including disclosing another user's network authentication IDs and scheduled post content, overwriting Open Graph and Twitter Card post metadata on posts they do not own, rebinding another user's social-network authorization, and mass-hiding all users' scheduled posts sitewide. The plugin's b2s_security_nonce is emitted on the post-edit meta box, which Contributors can render, making the nonce available to any authenticated user at that role level or above.

CVE-2026-77426 7.1 Élevée 22/09/2026 23:17

unleash

Unleash is an open-source feature management platform. Prior to 8.0.3, the Unleash admin API contains five authorization vulnerabilities. POST /api/admin/segments/strategies assigns the Promise returned by hasPermission without awaiting it, allowing authenticated users to modify segment assignments without UPDATE_FEATURE_STRATEGY permission for the target project and environment. GET /api/admin/projects/:projectId/features/:featureName/environments/:environment/variants does not bind the requested feature to projectId, allowing cross-project variant configuration disclosure. GET .../strategies/:strategyId uses strategyId without validating the project and feature context, allowing cross-project strategy configuration disclosure. getEnvironmentInfo does not validate that the requested feature belongs to the supplied project, allowing cross-project environment information disclosure. PUT /:projectId/tags accepts feature identifiers without verifying that they belong to the URL project, allowing cross-project tag modification. This issue is fixed in version 8.0.3.

CVE-2026-65980 7.9 Élevée 22/09/2026 00:16

chartbrew

Chartbrew is an open-source web application that can connect directly to databases and APIs and use the data to create charts. Prior to 5.2.3, Chartbrew's ClickHouse protocol in server/sources/plugins/clickhouse/clickhouse.protocol.js calls applySqlVariables() from server/sources/shared/sql/sql.variables.js without enabling the escapeBackslash option. For a ClickHouse-backed chart with variable binding, an attacker can supply a backslash before a quote so quote doubling does not keep the value within its intended SQL string literal. Public dashboards can expose this path without authentication, and successful exploitation can execute arbitrary ClickHouse SQL to disclose data or, when the database configuration permits, access files or internal network resources. This issue is fixed in version 5.2.3.

CVE-2026-76898 7.7 Élevée 21/09/2026 19:18

jgraph drawio

draw.io is a configurable diagramming and whiteboarding application. Prior to version 30.3.8, src/main/java/com/mxgraph/online/Utils.java checks IPv6 Unique Local Addresses in Utils.sanitizeUrl() by comparing the text prefixes fc00:: and fd00::, but the JDK returns the expanded address form, so the fc00::/7 range, including the AWS metadata range fd00:ec2::/32, is not blocked. An unauthenticated request to /embed2.js?fetch= can therefore make src/main/java/com/mxgraph/online/EmbedServlet2.java fetch an IPv6 ULA internal resource and reflect the response to the requester. Utils.validatedAddress() uses the same private-address check for the separate ProxyServlet path, which requires ENABLE_DRAWIO_PROXY=1. The primary /embed2.js path requires no proxy feature flag or DNS rebinding, and it can disclose cloud metadata credentials or data from other IPv6-reachable internal services. This issue is fixed in version 30.3.8.

CVE-2026-93202 – Non évaluée 17/09/2026 19:18

Linux

In the Linux kernel, the following vulnerability has been resolved: i3c: master: Fix recursive locking during device registration i3c_master_register_new_i3c_devs() registers newly discovered devices while holding i3c_bus_normaluse_lock(), a down_read(). device_register() can immediately probe the device, and probe callbacks typically invoke I3C helpers that take i3c_bus_normaluse_lock() again, leading to a recursive acquisition of the same rwsem. rwsems do not support recursive read locking and can deadlock when a writer is waiting. See the "Recursive read locks" section of Documentation/locking/lockdep-design.rst. For example, with Intel LPSS I3C, LOCKDEP generates a WARNING like: # echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/unbind # echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/bind WARNING: possible recursive locking detected kworker/5:1/94 is trying to acquire lock: ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_device_match_id+0x45/0x370 but task is already holding lock: ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_master_reg_work_fn+0x21/0x5f0 Fix this by separating device creation from device registration. Populate desc->dev under the maintenance lock, collect the devices that still need registration into a local list, then release the lock before calling device_register(). Finally retake the lock and clean up any devices that failed to register. Use the maintenance lock rather than the normal-use lock while adding device objects. A write-side maintenance lock prevents readers from observing a partially initialized desc->dev during initial device population, or desc->dev disappearing if registration fails. The local list requires a list node, so add a list node member to struct i3c_device.

CVE-2026-90169 – Non évaluée 17/09/2026 19:17

Linux

In the Linux kernel, the following vulnerability has been resolved: ksmbd: free preauth sessions on connection teardown SMB3.1.1 multichannel binding preserves the preauthentication hash in a preauth_session between the NTLM negotiate and authenticate requests. The binding NTLM negotiate allocates this object and returns STATUS_MORE_PROCESSING_REQUIRED. If the client disconnects before it sends the authenticate request, neither the authenticate nor error cleanup paths free the object. Release any remaining preauthentication sessions when tearing down the connection. Initialize the list when allocating the connection so that this cleanup is safe regardless of the negotiated dialect.

CVE-2026-42784 7.4 Élevée 16/09/2026 19:17

Red Hat Ansible Automation Platform 2.6 for RHEL 9 · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 9 · Red Hat Cost Management On-Premise 1

A flaw was found in sequoia-openpgp. The library incorrectly infers key flags for older certificates when a key flags subpacket is missing, leading to a discrepancy in how key capabilities are viewed. This key flag confusion allows an attacker to bypass the back-signature check. Consequently, an attacker can illegitimately bind an arbitrary subkey to their own certificate and forge signatures, completely compromising cryptographic integrity.

CVE-2026-80274 7.5 Élevée 16/09/2026 17:17

ISC BIND 9

If a BIND resolver sends a query for a DNSSEC-signed authoritative zone, and the authoritative server replies with a valid wildcard answer and signed NSEC3 proof, followed by an unsigned NSEC at the same owner name, it will trigger an unexpected program exit. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

CVE-2026-77119 5.9 Moyenne 16/09/2026 17:17

ISC BIND 9

A validly signed NSEC3 from an unrelated sibling zone may be accepted as an insecurity proof, downgrading a secure delegation and letting a forged unsigned answer through. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

CVE-2026-76163 7.5 Élevée 16/09/2026 17:17

ISC BIND 9

If BIND is loaded with a "`named.conf`" file that contains no global "`options`" block, an attacker can send a query of QTYPE TKEY which may cause an assertion failure and subsequent unexpected program exit. This issue affects BIND 9 versions 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, and 9.20.9-S1 through 9.20.27-S1.

CVE-2026-75029 5.3 Moyenne 16/09/2026 17:17

ISC BIND 9

In a query response, an attacker may send `named` multiple copies of a record that should only exist once (such as an SOA record). If the RDATA is the same on all the copies, the record is appended to the in-memory RDATA set, which can cause increased memory usage of the negative cache and possibly lead to other memory attack vectors. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

CVE-2026-19668 5.3 Moyenne 16/09/2026 17:17

ISC BIND 9

A BIND recursive resolver may experience excessive resource consumption if it encounters large numbers of a particular kind of invalid DNSSEC record. Default limits on "max-records-per-type" and "max-types-per-name" help mitigate the exposure. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

CVE-2026-19666 7.5 Élevée 16/09/2026 17:17

ISC BIND 9

On a resolver configured to use ``dns64``, if an applicable answer from the authoritative server is malformed in a specific way, the resolver `named` process will exit unexpectedly. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

CVE-2026-19033 6.5 Moyenne 16/09/2026 17:17

ISC BIND 9

For a secondary zone with transfers restricted by TSIG, `named` may start to serve the data provided in a zone transfer before the final message with the TSIG signature arrives. This could allow an attacker that does not actually possess a valid TSIG signature to send unauthorized zone contents to a secondary server. Although no TSIG signature ever arrives, `named` does not rollback to the pre-transfer state. To exploit the vulnerability, the transfer must be a multi-message TCP IXFR, as described by RFC 8945. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

CVE-2026-81736 7.5 Élevée 16/09/2026 16:17

ISC BIND 9

If a BIND resolver has cached a tree of SVCB/HTTPS AliasMode records, and is then queried for the root of that tree, the resolver will spend disproportionate CPU time constructing the response. This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.18.11-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

CVE-2026-81563 7.5 Élevée 16/09/2026 16:17

ISC BIND 9

A BIND resolver encountering an SVCB/HTTPS AliasMode record referencing 14 or more SVCB/HTTPS ServiceMode records may fail to properly deallocate internal resources. If this happens repeatedly, resource exhaustion will eventually prevent the resolver from performing new recursive lookups. This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.18.11-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

CVE-2026-78301 5.8 Moyenne 16/09/2026 16:17

ISC BIND 9

A malformed zone may contain an NS or DNAME node above its origin, which `named` treats as a zone cut. If an attacker inserts a malformed zone into a BIND authoritative server (e.g., via zone transfer), queries for names inside the configured zone then lose authoritative status and return an out-of-zone delegation. On a server that also provides recursion BIND can follow this locally sourced cut and cache attacker-supplied data, affecting names outside the configured zone. This situation persists as long as the malformed zone remains in the zone database. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

CVE-2026-77692 7.5 Élevée 16/09/2026 16:17

ISC BIND 9

An attacker can cause `named` to abort by sending a crafted DNS-over-HTTPS request with a cryptographically invalid SIG(0) record, and then closing the transport connection prematurely. This issue affects BIND 9 versions 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, and 9.20.9-S1 through 9.20.27-S1.

CVE-2026-19941 5.9 Moyenne 16/09/2026 16:17

ISC BIND 9

An inapplicable NSEC record may be accepted by a `named` resolver as proof that no wildcard exists, which could allow an attacker at the same or an upstream level of the zone name to mask the existence of a victim's wildcard record. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

CVE-2026-19667 7.5 Élevée 16/09/2026 16:17

ISC BIND 9

If an attacker-controlled authoritative server can produce a negative answer that is exactly 65536 bytes, then a flaw in `named` results in a negative cache entry of 0 bytes. When this entry is subsequently read, `named` aborts. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

CVE-2026-19662 5.9 Moyenne 16/09/2026 16:17

ISC BIND 9

An attacker may be able to cause a `named` resolver to abort. The attack requires inducing the victim resolver to send multiple queries for a DNSSEC-signed zone hosted by an authoritative server under the control of the attacker. If the auth responds with a particular sequence of crafted answers, and those answers arrive in a particular order with particular timing, the `named` resolver will encounter a use-after-free bug, and abort. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

CVE-2026-59971 10.0 Critique 15/09/2026 17:17

designcomputer mysql_mcp_server

MySQL MCP Server is a Model Context Protocol server that enables secure interaction with MySQL databases. Prior to 0.4.2, setting MCP_TRANSPORT=sse causes src/mysql_mcp_server/server.py to construct SseServerTransport without security_settings or enable_dns_rebinding_protection, while the Starlette routes /, /sse, and /messages/ have no authentication and the service binds to 0.0.0.0 by default. A network attacker can directly reach execute_sql, or can use DNS rebinding to make a victim's browser relay same-origin requests to a locally bound service, and supply a query that reaches cursor.execute(query). This allows unauthenticated disclosure and modification of the configured database; when the MySQL account has FILE privileges, the same access can read or write server files and may enable code execution. The default stdio transport is not affected. This issue is fixed in 0.4.2.

CVE-2026-57139 9.8 Critique 15/09/2026 13:17

MervinPraison PraisonAI

PraisonAI is a multi-agent teams system. From 1.5.0 until 1.7.2, MCPServer.startHttp() in src/praisonai-ts/src/mcp/server.ts binds without a host restriction and forwards every HTTP POST request to handleRequest() without authentication or authorization. Any network client that can reach the port can call tools/list, tools/call, resources/read, or prompts/get, causing registered handlers to run with server-side credentials and process privileges or disclose registered data. An initial remediation was released in version 1.7.2.

CVE-2026-55846 6.2 Moyenne 14/09/2026 20:17

allure-framework allure2

Allure 2 is the version 2.x branch of Allure Report, a multi-language test reporting tool. Prior to 2.39.0, the HTTP server started by allure serve and allure open uses URI.getPath() in Commands.setUpServer() in allure-commandline/src/main/java/io/qameta/allure/Commands.java and passes the percent-decoded request path to reportDirectory.resolve() without normalizing the result or confirming that it remains inside that directory. An unauthenticated client that can reach the server can submit parent-directory segments, including percent-encoded segments, and cause serveFile() to return any regular file readable by the Allure process. The server binds to localhost by default, but the --host option can expose it to other systems, and local users, adjacent containers, or browser-origin attacks may reach a local listener. This can disclose credentials, configuration, source code, build secrets, and other CI/CD data. This issue is fixed in version 2.39.0.

CVE-2026-53708 6.6 Moyenne 14/09/2026 18:17

IBM mcp-context-forge · IBM mcp-contextforge-gateway

ContextForge is an AI gateway, registry, and proxy that provides centralized discovery, guardrails, and management for MCP, A2A, and REST or gRPC APIs. Prior to 1.0.3, the /admin/gateways/test call site in mcpgateway/admin.py calls validate_gateway_test_url() in mcpgateway/common/validators.py to resolve and reject private, loopback, link-local, and cloud-metadata addresses, but ResilientHttpClient later resolves the original hostname again without binding the validated address. When MCPGATEWAY_ADMIN_API_ENABLED is enabled, an attacker with a database-backed role containing explicit gateways.read permission can use DNS rebinding to return a public address during validation and a private or metadata address during connection, bypassing ssrf_blocked_networks and ssrf_dns_fail_closed because those controls apply only to the validation-time result. The endpoint's allow_admin_bypass=False setting means a bootstrap-only virtual platform-admin identity without a database role is not sufficient. Successful exploitation can reach internal services and cloud metadata, expose cloud credentials, access internal APIs, or probe internal network ports. This issue is fixed in version 1.0.3.

CVE-2026-90678 7.5 Élevée 13/09/2026 06:17

HAProxy

An issue was discovered in HAProxy 3.3.0 through 3.4.4 and in 3.5-dev1 through 3.5-dev5. Exploitation requires an HTTP/3 frontend: HAProxy must be built with QUIC support and configured with a QUIC bind listener, and the affected traffic must reach a backend over HTTP/1.1 using chunked transfer coding on a reused connection. Under those conditions, when an HTTP/3 request carries no Content-Length header, the HTTP/3 multiplexer credits the length declared in a DATA frame header to the stream endpoint's known-input-payload estimate at the moment the frame header is decoded, before the payload has been received, and that declared length is emitted verbatim as the HTTP/1.1 chunk size. A remote unauthenticated client that declares more payload than it delivers and then ends the stream causes HAProxy to announce a chunk larger than the bytes it writes and to return the connection to the idle pool in a desynchronized state. The result is potential HTTP request smuggling on reused backend connections: an attacker can place a request past a frontend rule such as a path-based http-request deny, so that the smuggled request is never seen by HAProxy's HTTP analysis, and can cause concurrent clients' requests, including their request lines and Authorization headers, to be consumed as the attacker's request body and lost. Exploitation is not deterministic; it depends on a race with backend connection pooling, succeeding in a majority of but not all trials during testing, and can be retried freely. The mechanism was introduced in 3.3-dev10; releases 3.2.x and earlier are unaffected.

CVE-2026-89635 9.8 Critique 11/09/2026 22:19

Linux

In the Linux kernel, the following vulnerability has been resolved: ksmbd: only rebind the reopened file's own oplock on durable reconnect ksmbd_reopen_durable_fd() walks the inode's m_op_list and rebinds every detached oplock to the reconnecting session: list_for_each_entry_rcu(op, &ci->m_op_list, op_entry, lockdep_is_held(&ci->m_lock)) { if (op->conn) continue; op->conn = ksmbd_conn_get(fp->conn); op->sess = work->sess; } The only key is op->conn == NULL, which every detached durable handle on that inode matches, not just the one owned by fp. When two sessions hold durable handles on the same file and both disconnect, reconnecting one of them adopts the other session's oplock: op->sess is overwritten with the reconnecting session without taking a reference on it, while op->conn pins the connection. The sibling teardown path, session_fd_check(), keys on the identity of the connection being torn down (op->conn == conn) rather than on shared state, and so does not have this problem. Once the adopting session is destroyed, ksmbd_session_destroy() frees it while the foreign oplock still points at it. The reader in ksmbd_close_fd_app_instance_id() validates only opinfo->conn, which is still live thanks to the reference taken above, and then dereferences the stale session: if (!opinfo->conn) { up_read(&fp->f_ci->m_lock); goto out; } ft = &opinfo->sess->file_table; write_lock(&ft->lock); BUG: KASAN: slab-use-after-free in _raw_write_lock+0x74/0xd0 Write of size 4 at addr ffff88810a970528 by task kworker/0:0/9 Workqueue: ksmbd-io handle_ksmbd_work Call Trace: _raw_write_lock+0x74/0xd0 ksmbd_close_fd_app_instance_id+0x183/0x410 smb2_open+0x1346/0x4430 handle_ksmbd_work+0x2bb/0x7b0 Reached from an authenticated session against a share with the default durable-handle and oplock configuration: two sessions open the same file with a durable-v2 handle and an RH lease under distinct AppInstanceIds, both log off, one reconnects with DH2C, and a later durable-v2 create carrying the other AppInstanceId walks into the freed session. Constrain the loop to the oplock owned by the file being reopened.

CVE-2026-89625 – Non évaluée 11/09/2026 22:19

Linux

In the Linux kernel, the following vulnerability has been resolved: HID: sony: fix UAF of ghl_poke_timer / ghl_urb at driver unbind For GHL (Guitar Hero Live) dongles, sony_probe() arms a periodic timer: ghl_magic_poke() (the timer callback) submits sc->ghl_urb, and the URB completion ghl_magic_poke_cb() re-arms the timer with mod_timer(). sony_remove() drained the timer with timer_delete_sync() and then freed the URB with usb_free_urb(): timer_delete_sync(&sc->ghl_poke_timer); usb_free_urb(sc->ghl_urb); timer_delete_sync() does not block re-arming, and while the URB is in flight the timer is not pending, so the sync delete is a no-op. A URB completion that runs after the delete re-arms the timer, and usb_free_urb() only drops a reference -- it does not kill an in-flight URB. sc is allocated with devm_kzalloc() and freed once sony_remove() returns, so the re-armed ghl_poke_timer (embedded in sc) then fires on freed memory, a use-after-free from timer softirq. This is a disconnect/rmmod race. Poison the URB first, then shut the timer down, before freeing the URB. usb_poison_urb() kills any in-flight URB and permanently rejects further submissions, so a poke timer that is still pending cannot re-submit the URB from ghl_magic_poke() in the window before timer_shutdown_sync() runs. usb_kill_urb() would not suffice: it only cancels the in-flight URB and leaves it submittable once it returns, so the pending timer could re-submit it and put a fresh URB in flight over the freed sc. timer_shutdown_sync() then drains any last callback and blocks re-arming. The probe error path is unaffected: it is only reached before the timer is armed. Reproduced under KASAN on next-20260710 via dummy_hcd + raw-gadget emulation of the GHL PS4 dongle (VID 0x1430 / PID 0x07bb): hid-sony binds and arms the poke timer, the poke URB is held in flight, the driver is unbound (freeing sc), then the URB is released. The completion re-arms the timer on the freed sc, and the re-armed timer fires ~8 s later: BUG: KASAN: slab-use-after-free in ghl_magic_poke+0x98/0xb0 Read of size 8 at addr ffff88810b02fd50 by task swapper/0/0 ghl_magic_poke+0x98/0xb0 call_timer_fn+0x35/0x2b0 __run_timers+0x69c/0x9a0 run_timer_softirq+0x173/0x2a0 Allocated by task 169: sony_probe Freed by task 338: devres_release_group <- hid_device_remove (sony_remove) Found by 0sec (https://0sec.ai) using automated source analysis.

CVE-2026-74739 7.8 Élevée 26/08/2026 17:16

Linux

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: skip hash tables in u32_bind_class() u32_walk() enumerates both struct tc_u_hnode and struct tc_u_knode through the walker callback. u32_bind_class() unconditionally casts the passed fh to tc_u_knode and accesses &n->res, so when fh is actually a tc_u_hnode, which has no tcf_result member, this results in a slab-out-of-bounds read of res->classid in tc_cls_bind_class(). The issue can be reproduced with the following commands: tc qdisc add dev lo root handle 1: hfsc tc class add dev lo parent 1: classid 1:1 hfsc sc rate 1000kbit tc filter add dev lo parent 1:1 protocol ip prio 1 u32 match u32 0 0 flowid 1:1 tc class add dev lo parent 1: classid 1:2 hfsc sc rate 2000kbit Fix this by skipping hash tables via the TC_U32_KEY(handle) check.

CVE-2026-71300 9.8 Critique 24/08/2026 19:18

Apache Software Foundation Apache Camel · Apache camel

Improper input validation vulnerability in Apache Camel Atmosphere Websocket component. This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-atmosphere-websocket producer selects which connected WebSocket peers a message is delivered to through Exchange headers, and the string values of those headers sat outside the Camel namespace: websocket.connectionKey and websocket.connectionKey.list, along with websocket.sendToAll, websocket.eventType and websocket.errorType. WebsocketEndpoint extends ServletEndpoint and so inherits HttpHeaderFilterStrategy, which filters only the Camel and camel prefixes; the dotted names therefore fell outside the filtered namespace and were admitted in both directions by every HTTP-family consumer. In a route bridging an HTTP consumer into an atmosphere-websocket producer, an external sender could supply the list header and take over the producer's dispatch decision. WebsocketProducer.process tests the list header before the single-key header, so an injected value discarded the recipient the route had selected: a notification intended for one connected client could be suppressed, or delivered instead to a different client whose connection key the sender knows. The header need not be a query parameter and need not be supplied as a list literally - Camel's HTTP binding promotes a repeated header name, and a bracketed value, to a List when mapping onto the Exchange - so an ordinary inbound HTTP header is sufficient to reach the list-valued branch. This is distinct from CVE-2026-55993, which concerns the consumer-side query-parameter path in the same component. The behaviour dates back to the introduction of these constants, first released in 2.17.0, and was unchanged until this fix. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, strip the dispatch headers at the trust boundary before the producer, for example with removeHeaders(“websocket.*”) placed between the HTTP consumer and the atmosphere-websocket producer. Note that the fix renames the header string values into the Camel namespace, which is a breaking change for routes that set them by literal string: routes referencing the WebsocketConstants fields symbolically are unaffected, and the change is documented in the upgrade guides. As defence in depth, do not bridge an untrusted HTTP consumer directly into a WebSocket producer whose dispatch is header-driven without stripping the dispatch namespace first.

CVE-2026-74667 7.8 Élevée 22/08/2026 18:16

Linux

In the Linux kernel, the following vulnerability has been resolved: net/packet: reset the MAC header on the packet-socket transmit path packet_parse_headers() resets the MAC header only for a SOCK_RAW frame whose socket did not bind a protocol. A protocol-bound SOCK_RAW socket, any SOCK_DGRAM frame, and the legacy SOCK_PACKET path therefore leave skb->mac_header unset here. For frames sent via __dev_queue_xmit() this is harmless: it resets the MAC header unconditionally. But the packet-socket PACKET_QDISC_BYPASS path uses dev_direct_xmit(), which does not, so the frame reaches ndo_start_xmit() with the MAC header unset. A driver that reads eth_hdr(skb) on transmit then dereferences skb->head + (u16)~0, an out-of-bounds access ~64 KiB past the head -- the same class fixed for one consumer in commit f5089008f90c ("macsec: do not read an unset MAC header in macsec_encrypt()"). packet_parse_headers() runs only on the transmit path, where skb->data points at the start of the L2 header for every packet-socket type regardless of its length: SOCK_RAW and SOCK_PACKET carry a user-supplied header and SOCK_DGRAM has one built by dev_hard_header(). Reset the MAC header unconditionally, mirroring __dev_queue_xmit(), so the frame is anchored on the bypass path too. Found by 0sec (https://0sec.ai) using automated source analysis; verified against source and matched to the macsec KASAN report in f5089008f90c. Compile-tested.

CVE-2026-74639 – Non évaluée 22/08/2026 18:16

Linux

In the Linux kernel, the following vulnerability has been resolved: ALSA: us144mkii: re-anchor capture URBs on resubmission capture_urb_complete() resubmits each capture URB without anchoring it: usb_get_urb(urb); ret = usb_submit_urb(urb, GFP_ATOMIC); Anchoring is a property of a submission, not of the URB. The giveback path calls usb_unanchor_urb() before urb->complete(), so an URB resubmitted from its own completion handler is off the anchor. The capture URBs are anchored once, at stream start, so from the first completion onward tascam->capture_anchor is empty. tascam_free_urbs(), tascam_disconnect(), tascam_suspend() and the stop-work path all call usb_kill_anchored_urbs(&tascam->capture_anchor) to reap the capture URBs before anything is freed. With the anchor empty those calls return immediately and the URBs stay queued on the host controller. tascam_free_urbs() then returns the capture transfer buffers with usb_free_coherent(), and snd_card_free() releases the snd_card allocation that embeds tascam (card->private_data). The controller completes the queued URBs afterwards, writing device-supplied data into the freed transfer buffer, and capture_urb_complete() dereferences the freed driver object. KASAN on 7.2.0-rc5 (arm64): BUG: KASAN: slab-use-after-free in dummy_timer Write of size 512 at addr ffff000015b62000 __asan_memcpy dummy_timer hrtimer_run_softirq Allocated by task 64: usb_alloc_coherent tascam_alloc_urbs tascam_probe Freed by task 170: usb_free_coherent tascam_free_urbs tascam_disconnect usb_unbind_interface BUG: KASAN: slab-use-after-free in capture_urb_complete Read of size 4 at addr ffff0000170ee878 Freed by task 170: release_card_device snd_card_free tascam_disconnect Restore the usb_anchor_urb() between the reference count bump and the resubmission. That also makes the handler's usb_unanchor_urb() failure arm meaningful again and restores usb_kill_anchored_urbs() as a barrier on the disconnect, suspend and stop-work paths. The anchoring was removed on the premise that the URB is already anchored from the initial submission, which does not hold once the first giveback has run. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>

CVE-2026-77775 8.6 Élevée 21/08/2026 14:16

Headroom Labs Headroom

Headroom's LLM proxy lets a client choose the upstream destination with the x-headroom-base-url request header. _resolve_openai_upstream_base in headroom/proxy/handlers/openai.py accepts the header value, requires only that it parse with an http or https scheme and a hostname, and returns it for use as the upstream base; _select_passthrough_base_url in headroom/providers/proxy_routes.py reads the same header for the passthrough routes. No check rejects loopback, link-local, or RFC 1918 destinations, and because the component is a proxy the upstream response is returned to the caller, so the request reaches internal services and cloud metadata addresses and their responses are disclosed. The Authorization header accompanying the request is forwarded unchanged to the caller-designated host. The pip console script binds 127.0.0.1 by default, but the reference docker-compose.yml ships --host 0.0.0.0 with published ports and no required HEADROOM_PROXY_TOKEN, which the server itself warns about at startup, so a deployment following the shipped compose exposes the affected data-plane routes to the network without authentication.

CVE-2026-71428 9.3 Critique 20/08/2026 19:19

Unstructured-IO unstructured

The unstructured library provides open-source components for ingesting and pre-processing images and text documents, such as PDFs, HTML, Word docs, and many more. From 0.4.7 until 0.24.0, the url argument of partition, partition_html, and partition_md is fetched without host validation in unstructured/partition/auto.py, unstructured/partition/html/partition.py, and unstructured/partition/md.py. An attacker who controls that URL can make a server-side ingestion service request loopback addresses, internal HTTP services, or cloud metadata endpoints through direct targets, redirects, or DNS rebinding. The response body is returned as Element text, allowing internal response disclosure, and side-effecting GET endpoints may also be triggered. This issue is fixed in version 0.24.0.

CVE-2026-77071 9.8 Critique 20/08/2026 14:16

n8n-io n8n · N8n n8n

n8n before 1.123.69, 2.33.4, and 2.34.1 contains a PostgREST filter injection vulnerability in the Supabase node's Row Get Many, Delete, and Update operations, which built filter queries by concatenating an expression-bindable value without escaping. An attacker could inject a condition that widened the filter to match every row, turning an intended single-row operation into full-table disclosure, deletion, or modification.

CVE-2026-75583 3.5 Faible 19/08/2026 19:21

ridafkih keeper.sh

keeper.sh's calendar module version prior to 2.18.14 contains a server-side request forgery (SSRF) guard bypass vulnerability that allows authenticated attackers to reach private network addresses by exploiting a DNS rebinding attack against the two-phase URL validation and connection flow. The SSRF guard validates a hostname's resolved IP addresses but discards them before the actual HTTP connection is opened, allowing an attacker who controls authoritative DNS to return a public address during validation and a private address during the subsequent independent socket-level DNS resolution, causing the guard to pass while the outbound connection reaches internal infrastructure such as cloud instance metadata endpoints.

CVE-2026-74496 7.8 Élevée 15/08/2026 15:17

Linux

In the Linux kernel, the following vulnerability has been resolved: fou: Fix use-after-free in fou_create() fou_create() publishes struct fou through sk_user_data before adding the new FOU port to the per-netns list. If fou_add_to_port_list() fails, the error path frees fou while it is still reachable through sk_user_data. A concurrent receive can then dereference the freed object in fou_from_sock(). This ordering issue was previously noted in the linked discussion. The failure is reachable when local port 0 is requested. Each socket binds to a different ephemeral port, but fou_cfg_cmp() compares the requested port 0 and reports -EALREADY once an entry already exists. Release the tunnel socket before freeing fou so sk_user_data is cleared first, and defer reclamation with kfree_rcu() to protect concurrent RCU readers. This matches the lifetime handling in fou_release().

CVE-2026-49282 5.1 Moyenne 14/08/2026 20:17

capstone-engine capstone

Capstone is a disassembly framework. Prior to version 6.0.0-Alpha9, Capstone's public `cs_insn_name()` API forwards caller-supplied instruction IDs directly to the selected architecture backend. Most backends validate the ID before indexing instruction-name tables, but the M68K and RISCV backends have missing or incomplete bounds checks. On a Capstone handle opened for M68K or RISCV, a caller-controlled invalid instruction ID can trigger an out-of-bounds read and crash the process. The demonstrated impact is availability loss in applications or bindings that expose instruction-name lookup to untrusted IDs. No code execution or data disclosure was demonstrated. Version 6.0.0-Alpha9 patches the issue.

CVE-2026-73068 5.9 Moyenne 11/08/2026 18:17

ToolJet

ToolJet is the open-source foundation am AI-native platform for building and deploying internal tools, workflows and AI agents. Prior to 3.20.207, the ToolJet Database HTTP API in server/src/modules/tooljet-db/controller.ts authorizes operations against the :organizationId URL path value without verifying that the caller belongs to that organization. JwtAuthGuard validates the tj-workspace-id header against the caller's memberships, while server/src/modules/tooljet-db/ability/index.ts grants VIEW_TABLES, VIEW_TABLE, and JOIN_TABLES without binding them to the path organization. An authenticated user can set tj-workspace-id to the user's own workspace and target another workspace through GET /api/tooljet-db/organizations/:organizationId/tables, GET /api/tooljet-db/organizations/:organizationId/table/:tableName, POST /api/tooljet-db/organizations/:organizationId/join, and the related table-management routes, allowing disclosure of table names, schemas, and rows and allowing tables to be created, altered, bulk populated, or dropped across tenant boundaries. This issue is fixed in version 3.20.207-lts.

CVE-2026-68398 7.8 Élevée 10/08/2026 15:20

Linux

In the Linux kernel, the following vulnerability has been resolved: ppp: defer channel free to an RCU grace period to fix pppol2tp RX UAF pppol2tp_recv() runs in the L2TP UDP-encap softirq RX path: l2tp_udp_encap_recv() -> l2tp_recv_common() -> pppol2tp_recv() -> ppp_input(&po->chan) It runs under rcu_read_lock() holding only an l2tp_session reference and takes NO reference on the internal PPP channel (struct channel, chan->ppp) that ppp_input() dereferences. The pppox socket is SOCK_RCU_FREE, so 'po' and the embedded ppp_channel are RCU-safe. But the internal struct channel is a separate allocation that ppp_release_channel() frees with a plain kfree(): close(data socket) -> pppol2tp_release() -> pppox_unbind_sock() -> ppp_unregister_channel() -> ppp_release_channel() -> kfree(pch) For a channel that is bound (PPPIOCGCHAN) but not attached to a ppp unit (no PPPIOCCONNECT, pch->ppp == NULL) and not bridged, teardown skips both ppp_disconnect_channel()'s synchronize_net() and ppp_unbridge_channels()'s synchronize_rcu(), so the kfree() has no grace period. rcu_read_lock() in pppol2tp_recv() does not protect against a plain kfree(), so an in-flight ppp_input() on one CPU can dereference the channel just freed by close() on another CPU. The bug is reachable by an unprivileged user. Defer the channel free to an RCU callback via call_rcu() so the grace period fences any in-flight ppp_input(). The disconnect and unbridge teardown paths already fence with synchronize_net()/synchronize_rcu(); call_rcu() does the same here without stalling the close() path.

CVE-2026-68372 – Non évaluée 10/08/2026 15:20

Linux

In the Linux kernel, the following vulnerability has been resolved: usb: core: port: Deattach Type-C connector on component unbind connector_unbind() is the mirror of connector_bind(), but it is missing the symmetric call to typec_deattach() that connector_bind() makes via: if (port_dev->child) typec_attach(port_dev->connector, &port_dev->child->dev); When a Thunderbolt dock is unplugged, two teardown paths race: 1. The component framework calls connector_unbind() first, which sets port_dev->connector = NULL without calling typec_deattach(). This leaves port->usb2_dev/port->usb3_dev in struct typec_port pointing at the USB device that is about to be freed. 2. usb_disconnect() then calls typec_deattach(port_dev->connector, ...), but port_dev->connector is already NULL, so the call is a no-op and port->usb2_dev is never cleared. 3. Concurrently, UCSI detects a PD partner-disconnect event and calls typec_unregister_partner(), which reads port->usb2_dev (now a dangling pointer to freed memory) and passes it to typec_partner_unlink_device() -> sysfs_remove_link() -> dev_name() on the freed device, corrupting the typec/UCSI partner state. This corruption leaves the Thunderbolt tunnel in an inconsistent state on the next dock hot-plug. On affected hardware the dock's I225/igc NIC fails to enumerate: AER fires a slot reset while the igc driver is still initialising ("PCIe link lost"), and the subsequent igc_reset attempt hits igc_rd32 on an already-detached device: igc 0000:2e:00.0 eth0: PCIe link lost, device now detached igc: Failed to read reg 0x0! WARNING: CPU: 9 PID: 129 at drivers/net/ethernet/intel/igc/igc_main.c:7005 igc_rd32+0xa4/0xc0 [igc] Call Trace: igc_disable_pcie_master+0x16/0xa0 [igc] igc_reset_hw_base+0x14/0x170 [igc] igc_reset+0x63/0x110 [igc] igc_io_slot_reset+0x9e/0xd0 [igc] report_slot_reset+0x5d/0xc0 pcie_do_recovery+0x209/0x400 aer_isr_one_error_type+0x235/0x430 aer_isr+0x4e/0x80 irq_thread+0xf4/0x1f0 4. UCSI later handles the PD partner-disconnect and calls typec_unregister_partner(), which still sees the stale port->usb2_dev and tries to remove its sysfs link a second time: kernfs: can not remove 'typec', no directory WARNING: CPU: 6 PID: 55 at fs/kernfs/dir.c:1706 kernfs_remove_by_name_ns+0xe9/0xf0 Workqueue: events ucsi_handle_connector_change [typec_ucsi] Call Trace: sysfs_remove_link+0x19/0x50 typec_unregister_partner+0x6e/0x120 [typec] ucsi_unregister_partner+0x107/0x150 [typec_ucsi] ucsi_handle_connector_change+0x3ec/0x490 [typec_ucsi] process_one_work+0x18e/0x3e0 worker_thread+0x2e3/0x420 kthread+0x10a/0x230 ret_from_fork+0x121/0x140 ret_from_fork_asm+0x1a/0x30 With worse timing the same stale pointer is dereferenced after the backing memory is freed, turning the warning into a use-after-free. Fix the asymmetry: call typec_deattach() before clearing port_dev->connector, matching what connector_bind() does on the bind side. typec_partner_deattach() is already protected by port->partner_link_lock, so it serialises safely with the concurrent typec_unregister_partner() path.

CVE-2026-68344 – Non évaluée 10/08/2026 15:20

Linux

In the Linux kernel, the following vulnerability has been resolved: usb: atm: ueagle-atm: reject descriptors that confuse probe and disconnect uea_probe() distinguishes a pre-firmware device from a post-firmware one using the USB id (UEA_IS_PREFIRM()), and stores a different object as the interface data in each case: a 'struct completion' for a pre-firmware device (to be waited on in .disconnect()), or a 'struct usbatm_data' for a post-firmware one. uea_disconnect() instead tells the two apart by the number of interfaces of the active configuration (a pre-firmware device exposes a single interface, ADI930 has 2 and eagle has 3), and casts the interface data accordingly. Because the two handlers use different criteria, a crafted device that advertises a pre-firmware id together with a multi-interface descriptor (or a post-firmware id with a single interface) makes them disagree: the small 'struct completion' stored by uea_probe() is then passed to usbatm_usb_disconnect(), which casts it to 'struct usbatm_data' and takes instance->serialize, reading past the end of the allocation: BUG: KASAN: slab-out-of-bounds in __mutex_lock+0x152a/0x1b80 Read of size 8 at addr ffff8880470e2c60 by task kworker/1:2/982 ... __mutex_lock+0x152a/0x1b80 usbatm_usb_disconnect+0x70/0x820 uea_disconnect+0x133/0x2c0 usb_unbind_interface+0x1dd/0x9e0 ... which belongs to the cache kmalloc-96 of size 96 The buggy address is located 0 bytes to the right of allocated 96-byte region [ffff8880470e2c00, ffff8880470e2c60) Reject such inconsistent descriptors in uea_probe() so that both handlers always make the same pre/post-firmware decision.

CVE-2026-71498 5.1 Moyenne 07/08/2026 00:18

uhop node-re2

node-re2 provides RE2 regular expression bindings for Node.js. Prior to version 1.26.1, passing a Buffer whose final bytes form a truncated (incomplete) multi-byte UTF-8 sequence could cause the native binding to read past the end of the allocated buffer while attempting to decode the final, incomplete code point. This could result in an out-of-bounds read and potential disclosure of adjacent memory contents. This issue is fixed in version 1.26.1.

CVE-2026-64590 – Non évaluée 06/08/2026 10:16

Linux

In the Linux kernel, the following vulnerability has been resolved: dma-buf/udmabuf: skip redundant cpu sync to fix cacheline EEXIST warning When CONFIG_DMA_API_DEBUG_SG is enabled, importing a udmabuf into a DRM driver (e.g. amdgpu for video playback in GNOME Videos / Showtime) triggers a spurious warning: DMA-API: amdgpu 0000:03:00.0: cacheline tracking EEXIST, \ overlapping mappings aren't supported WARNING: kernel/dma/debug.c:619 at add_dma_entry+0x473/0x5f0 The call chain is: amdgpu_cs_ioctl -> amdgpu_ttm_backend_bind -> dma_buf_map_attachment -> [udmabuf] map_udmabuf -> get_sg_table -> dma_map_sgtable(dev, sg, direction, 0) // attrs=0 -> debug_dma_map_sg -> add_dma_entry -> EEXIST This happens because udmabuf builds a per-page scatter-gather list via sg_set_folio(). When begin_cpu_udmabuf() has already created an sg table mapped for the misc device, and an importer such as amdgpu maps the same pages for its own device via map_udmabuf(), the DMA debug infrastructure sees two active mappings whose physical addresses share cacheline boundaries and warns about the overlap. The DMA_ATTR_SKIP_CPU_SYNC flag suppresses this check in add_dma_entry() because it signals that no CPU cache maintenance is performed at map/unmap time, making the cacheline overlap harmless. All other major dma-buf exporters already pass this flag: - drm_gem_map_dma_buf() passes DMA_ATTR_SKIP_CPU_SYNC - amdgpu_dma_buf_map() passes DMA_ATTR_SKIP_CPU_SYNC The CPU sync at map/unmap time is also redundant for udmabuf: begin_cpu_udmabuf() and end_cpu_udmabuf() already perform explicit cache synchronization via dma_sync_sgtable_for_cpu/device() when CPU access is requested through the dma-buf interface. Pass DMA_ATTR_SKIP_CPU_SYNC to dma_map_sgtable() and dma_unmap_sgtable() in udmabuf to suppress the spurious warning and skip the redundant sync.

CVE-2026-47617 7.5 Élevée 04/08/2026 20:16

NVIDIA Dynamo

NVIDIA Dynamo for Linux contains a vulnerability in the multimodal media fetcher where an attacker may cause server-side request forgery via DNS rebinding. A successful exploit of this vulnerability might lead to information disclosure.

CVE-2026-64465 – Non évaluée 25/07/2026 12:17

Linux

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix sleep in atomic context in xhci_free_streams() When a USB device with active stream endpoints is disconnected, xhci_free_streams() is called from the hub_event workqueue to free the stream resources. It calls xhci_free_stream_info() while holding xhci->lock with irqs disabled. xhci_free_stream_info() invokes xhci_free_stream_ctx(), which calls dma_free_coherent() for large stream context arrays. dma_free_coherent() can sleep (e.g. via vunmap), triggering a BUG when called from atomic context. Call trace: dma_free_attrs+0x174/0x220 xhci_free_stream_info+0xd0/0x11c xhci_free_streams+0x278/0x37c usb_free_streams+0x98/0xc0 usb_unbind_interface+0x1b8/0x2f8 device_release_driver_internal+0x1d4/0x2cc device_release_driver+0x18/0x28 bus_remove_device+0x160/0x1a4 device_del+0x1ec/0x350 usb_disable_device+0x98/0x214 usb_disconnect+0xf0/0x35c hub_event+0xab4/0x19ec process_one_work+0x278/0x63c Fix this by saving the stream_info pointers and clearing the ep references under the lock, then calling xhci_free_stream_info() outside the lock where sleeping is allowed.

CVE-2026-64453 7.8 Élevée 25/07/2026 12:17

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: fix disconnect UAF in client teardown usbio_disconnect() walks usbio->cli_list in reverse and uninitializes each auxiliary device. auxiliary_device_uninit() drops the device reference, and for an unbound child that can run usbio_auxdev_release() and free the containing struct usbio_client. list_for_each_entry_reverse() advances after the loop body by reading client->link.prev. If the current client is freed by auxiliary_device_uninit(), the iterator dereferences freed memory. Use list_for_each_entry_safe_reverse() so the previous client is cached before the body can drop the final reference. This preserves reverse teardown order while keeping the next iterator cursor independent of the current client's lifetime. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in usbio_disconnect+0x12e/0x150 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? usbio_disconnect+0x12e/0x150 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x188/0x320 ? usbio_disconnect+0x12e/0x150 kasan_report+0xe0/0x110 ? usbio_disconnect+0x12e/0x150 usbio_disconnect+0x12e/0x150 usb_unbind_interface+0xf3/0x400 really_probe+0x316/0x660 __driver_probe_device+0x106/0x240 driver_probe_device+0x4a/0x110 __device_attach_driver+0xf1/0x1a0 ? __pfx___device_attach_driver+0x10/0x10 bus_for_each_drv+0xf9/0x160 ? __pfx_bus_for_each_drv+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? trace_hardirqs_on+0x18/0x130 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __device_attach+0x133/0x2a0 ? __pfx___device_attach+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_raw_spin_unlock+0x9a/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 device_initial_probe+0x55/0x70 bus_probe_device+0x4a/0xd0 device_add+0x9b9/0xc10 ? __pfx_device_add+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x44/0x60 ? srso_alias_return_thunk+0x5/0xfbef5 ? lockdep_hardirqs_on_prepare+0xea/0x1a0 ? srso_alias_return_thunk+0x5/0xfbef5 ? usb_enable_lpm+0x3c/0x260 usb_set_configuration+0xb64/0xf20 usb_generic_driver_probe+0x5f/0x90 usb_probe_device+0x71/0x1b0 really_probe+0x46b/0x660 __driver_probe_device+0x106/0x240 driver_probe_device+0x4a/0x110 __device_attach_driver+0xf1/0x1a0 ? __pfx___device_attach_driver+0x10/0x10 bus_for_each_drv+0xf9/0x160 ? __pfx_bus_for_each_drv+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? trace_hardirqs_on+0x18/0x130 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __device_attach+0x133/0x2a0 ? __pfx___device_attach+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_raw_spin_unlock+0x9a/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 device_initial_probe+0x55/0x70 bus_probe_device+0x4a/0xd0 device_add+0x9b9/0xc10 ? __pfx_device_add+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? add_device_randomness+0xb7/0xf0 usb_new_device+0x492/0x870 hub_event+0x1b10/0x29c0 ? __pfx_hub_event+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0x187/0x300 ? process_one_work+0x475/0xb90 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 process_one_work+0x4d7/0xb90 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_hub_event+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>

CVE-2026-64294 5.5 Moyenne 25/07/2026 12:17

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: mm: do file ownership checks with the proper mount idmap Ever since idmapped mounts were introduced, inode ownership checks (for side-channel protection) in mincore() and madvise(MADV_PAGEOUT) were done against the nop_mnt_idmap, which completely ignores the file's mount's idmap. This results in odd edgecases like: 1) mount/bind-mount with an idmap userA:userB:1 2) userB runs an owner_or_capable() check on file that is owned by userA on-disk/in-memory, but owned by userB after idmap translation 3) owner_or_capable() mysteriously fails as the correct idmap wasn't supplied In the case of mincore/madvise MADV_PAGEOUT, this is usually benign, because file_permission(file, MAY_WRITE) will probably succeed, as it uses the proper idmap internally, but it does not need to be the case on e.g a 0444 file where even the owner itself doesn't have permissions to write to it. Since this is clearly not trivial to get right, introduce a file_owner_or_capable() that can carry the correct semantics, and switch the various users in mm to it. The issue was found by manual code inspection & an off-list discussion with Jan Kara.

CVE-2026-64283 7.0 Élevée 25/07/2026 12:17

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: KVM: guest_memfd: Treat memslot binding offset+size as unsigned values When binding a memslot to a guest_memfd file, treat the offset and size as unsigned values to fix a bug where the sum of the two can result in a false negative when checking for overflow against the size of the file. Passing unsigned values also avoids relying on somewhat obscure checks in other flows for safety, and tracks the offset and size as they are intended to be tracked, as unsigned values. On 64-bit kernels, the number of pages a memslot contains and thus the size (and offset) of its guest_memfd binding are unsigned 64-bit values. Taking the offset+size as an loff_t instead of a uoff_t inadvertently converts the unsigned value to a signed value if the offset and/or size is massive. Locally storing the offset and size as signed values is benign in and of itself (though even that is *extremely* difficult to discern), but operating on their sum is not. For the offset, KVM explicitly checks against a negative value, which might seem like a bug as KVM could incorrectly reject a legitimate binding, but that's not actually the case as KVM_CREATE_GUEST_MEMFD takes a signed value for its size, i.e. a would-be-negative offset is also greater than the maximum possible size of any guest_memfd file. Regarding the size, while KVM lacks an explicit check for a negative value, i.e. seemingly has a flawed overflow check, KVM restricts the number of pages in a single memslot to the largest positive signed 32-bit value: if (id < KVM_USER_MEM_SLOTS && (mem->memory_size >> PAGE_SHIFT) > KVM_MEM_MAX_NR_PAGES) return -EINVAL; and so that maximum "size" will ever be is 0x7fffffff000. The sum of the two is, however, problematic. While the size is restricted by KVM's memslot logic, the offset is not, i.e. the offset is completely unchecked until the "offset + size > i_size_read(inode)" check. If the offset is the (nearly) largest possible _positive_ value, then adding size to the offset can result in a signed, negative 64-bit value. When compared against the size of the file (guaranteed to be positive), the negative sum is always smaller, and KVM incorrectly allows the absurd offset. Opportunistically add missing includes in kvm_mm.h (instead of relying on its parents).

CVE-2026-66005 6.3 Moyenne 24/07/2026 17:19

janhq jan

Jan through 0.8.4, fixed in commit 3e1c1e7, contains a CORS misconfiguration vulnerability in its local API server that allows network-adjacent attackers to bypass trusted host restrictions by exploiting the server's replacement of user-configured trusted hosts with a wildcard that reflects arbitrary origins with credentials. Attackers on the local network or using DNS rebinding can reach the unauthenticated OpenAI-compatible API to perform inference, enumerate models, invoke MCP tools, and read cross-origin responses.

CVE-2026-13321 8.6 Élevée 22/07/2026 17:16

ISC BIND 9

The BIND resolver accepts validly-signed NSEC records where the "Next Domain Name" field points outside the signer's zone. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.

CVE-2026-13204 7.5 Élevée 22/07/2026 17:16

ISC BIND 9

If a provably insecure domain is covered by both an NSEC and NSEC3 record at the parent, and there exist an RRSIG for only one of these types, then BIND may exit unexpectedly with an assertion while validating this proof. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.

CVE-2026-12617 7.5 Élevée 22/07/2026 17:16

ISC BIND 9

The issue is unexpected program termination based on ordering and/or specific content in responses to queries for CNAME or DNAME, and A records. Specifically, if a client queries for a DNAME and A record below the DNAME to the resolver, and the authoritative server responds positively to the A query but delays the DNAME response and later responds negatively, `named` may quit unexpectedly. Or, if a client queries for a CNAME and A record for the same name to the resolver, and the authoritative server responds positively to the A query but delays the CNAME response and later responds with a self-referential CNAME, the same failure may occur. This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.24, 9.18.11-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.

CVE-2026-11721 7.5 Élevée 22/07/2026 17:16

ISC BIND 9

It is possible for an attacker's zone to respond to a query with an RRSIG that has a smaller number of labels than the zone in which the RRSIG is contained. This causes `named` to produce a wildcard name for a zone that is shorter than the attacker's zone, which can result in cache poisoning. For this attack to have any effect, the resolver under attack must have set `synth-from-dnssec yes;` (which is the default). This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.

CVE-2026-11622 7.5 Élevée 22/07/2026 17:16

ISC BIND 9

A DNSSEC validating resolver that is under a random subdomain attack against a DNSSEC-signed zone can suffer from runaway memory usage. The attacker needs to be able to send queries faster than the resolver can perform validation. The increased memory usage can be orders of magnitude beyond the limit configured in the `max-cache-size` parameter. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.

CVE-2026-11605 7.5 Élevée 22/07/2026 17:16

ISC BIND 9

The issue is a resource exhaustion vulnerability associated with DNSSEC validation. BIND always validates all RRSIG records in an answer, even if they are not strictly needed. A query to an authoritative server/zone which returns many valid but superfluous RRSIG records causes the validator to waste disproportionate CPU time. This issue affects BIND 9 versions 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, and 9.20.9-S1 through 9.20.24-S1.

CVE-2026-11331 7.5 Élevée 22/07/2026 17:16

ISC BIND 9

An attacker who knows (or guesses) that a resolver uses RPZ with wildcard CNAME policies can craft query names long enough to trigger a NAMETOOLONG error condition during RPZ processing. This is not handled correctly and may lead to defeating the RPZ rule. It also may lead to an unexpected exit of the BIND 9 software. This issue affects BIND 9 versions 9.16.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.16.8-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.

CVE-2026-10822 6.5 Moyenne 22/07/2026 17:16

ISC BIND 9

If BIND encounters a particular invalid data structure in a DNS record, it will accept the invalid data, and may subsequently abort and exit. BIND will first need to store a DNS record for a key (KEY, DNSKEY, etc.). That key must specify a PRIVATEDNS algorithm (253), and in the algorithm identifier, improperly give a length longer than the actual identifier data. The invalid identifier will be stored. If BIND later needs to render that record to text, it will use the invalid length during processing, leading to a consistency check failing. This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.18.11-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.

CVE-2026-10723 6.8 Moyenne 22/07/2026 17:16

ISC BIND 9

BIND may accept incorrect child-zone NSEC3 records as valid, which could allow an attacker to forge authenticated NXDOMAIN responses. This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.

CVE-2026-63877 – Non évaluée 19/07/2026 18:17

Linux

In the Linux kernel, the following vulnerability has been resolved: serial: dz: Convert to use a platform device Prevent a crash from happening as the first serial port is initialised: Console: switching to colour frame buffer device 160x64 tgafb: SFB+ detected, rev=0x02 fb0: Digital ZLX-E1 frame buffer device at 0x1e000000 DECstation DZ serial driver version 1.04 CPU 0 Unable to handle kernel paging request at virtual address 000000bc, epc == 8048b3a4, ra == 80470a78 Oops[#1]: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.19.0-dirty #35 NONE $ 0 : 00000000 1000ac00 00000004 804707ac $ 4 : 00000000 80e20850 80e20858 81000030 $ 8 : 00000000 8072c81c 00000008 fefefeff $12 : 6c616972 00000006 80c5917f 69726420 $16 : 80e20800 00000000 808f8968 80e20800 $20 : 00000000 807f5a90 808b0094 808d3bc8 $24 : 00000018 80479030 $28 : 80c2e000 80c2fd70 00000069 80470a78 Hi : 00000004 Lo : 00000000 epc : 8048b3a4 __dev_fwnode+0x0/0xc ra : 80470a78 serial_base_ctrl_add+0xa0/0x168 Status: 1000ac04 IEp Cause : 30000008 (ExcCode 02) BadVA : 000000bc PrId : 00000220 (R3000) Modules linked in: Process swapper/0 (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) Stack : 00400044 00400040 8046f4cc 00000000 808a6148 808a0000 808f8968 8086983c 808e0000 8046fc84 1000ac01 00000028 80e20700 802ba3f8 80e20700 80d34a94 80c1b900 80e20700 80e20700 80e20700 80e20700 80444650 00000000 00000000 00000000 807f5a90 808b0094 80447080 00400040 808e0000 80d34a94 808a6148 80d34a94 00000004 80e20700 00000000 8076974c 80469810 80c2fe3c 1000ac01 ... Call Trace: [<8048b3a4>] __dev_fwnode+0x0/0xc [<80470a78>] serial_base_ctrl_add+0xa0/0x168 [<8046fc84>] serial_core_register_port+0x1c8/0x974 [<808c6af0>] dz_init+0x74/0xc8 [<800470e0>] do_one_initcall+0x44/0x2d4 [<808b111c>] kernel_init_freeable+0x258/0x308 [<8072e434>] kernel_init+0x20/0x114 [<80049cd0>] ret_from_kernel_thread+0x14/0x1c Code: 27bd0018 03e00008 2402ffea <8c8200bc> 03e00008 00000000 27bdffc0 afbe0038 afb30024 ---[ end trace 0000000000000000 ]--- -- where a pointer is dereferenced that has been derived from a null pointer to the port's parent device. Since no device is available with legacy probing and it's not anymore a preferable way to discover devices anyway, switch the driver to using a platform device and use it as the port's parent device. Update resource handling accordingly and only request the actual span of addresses used within the slot, which will have had its resource already requested by generic platform device code. Use platform_driver_probe() not just because the DZ device is fixed with solder on board and not straightforward to remove, but foremost because the associated TTY's major device number is the same as used by the zs driver and the first driver to claim it will prevent the other one from using it. Either one DZ device or some SCC devices will be present in a given system but never both at a time, and therefore we want the major device number to be claimed by the first driver to actually successfully bind to its device and platform_driver_probe() is a way to fulfil that. An unfortunate consequence of the switch to a platform device is we now hand the console over from the bootconsole much later in the bootstrap. The firmware console handler appears good enough though to work so late and in particular with interrupts enabled. Conversely only starting the console port so late lets the reset code fully utilise our delay handlers, so switch from udelay() to fsleep() for transmitter draining so as to avoid busy-waiting for an excessive amount of time.

CVE-2026-63876 – Non évaluée 19/07/2026 18:17

Linux

In the Linux kernel, the following vulnerability has been resolved: serial: zs: Convert to use a platform device Prevent a crash from happening as the first serial port is initialised: Console: switching to mono frame buffer device 160x64 fb0: PMAG-AA frame buffer device at tc0 DECstation Z85C30 serial driver version 0.10 CPU 0 Unable to handle kernel paging request at virtual address 0000002c, epc == 803ab00c, ra == 803aafe0 Oops[#1]: CPU: 0 PID: 1 Comm: swapper Not tainted 6.4.0-rc3-00031-g84a9582fd203-dirty #57 $ 0 : 00000000 10012c00 803aaeb0 00000000 $ 4 : 80e12f60 80e12f50 80e12f58 81000030 $ 8 : 00000000 805ff37c 00000000 33433538 $12 : 65732030 00000006 80c2915d 6c616972 $16 : 80e12f00 807b7630 00000000 00000000 $20 : 00000004 00000348 000001a0 807623b8 $24 : 00000018 00000000 $28 : 80c24000 80c25d60 8078b148 803aafe0 Hi : 00000000 Lo : 00000000 epc : 803ab00c serial_base_ctrl_add+0x78/0xf4 ra : 803aafe0 serial_base_ctrl_add+0x4c/0xf4 Status: 10012c03 KERNEL EXL IE Cause : 00000008 (ExcCode 02) BadVA : 0000002c PrId : 00000440 (R4400SC) Modules linked in: Process swapper (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) Stack : 80760000 00000cc0 00400044 00400040 803aa02c 80d61ab8 00000000 807b7630 80760000 807623b8 807b7628 803aa644 80386998 00000000 80e17780 80220f68 80e17780 80d61ab8 80c17d80 80e17780 80e17780 8063c798 80e17780 80383fa0 00000010 80e17780 00000000 80386998 807a0000 00000000 00400040 8038f848 807623b8 80d61ab8 00000004 80e17780 00000000 803a68e4 80c25e2c 803bb884 ... Call Trace: [<803ab00c>] serial_base_ctrl_add+0x78/0xf4 [<803aa644>] serial_core_register_port+0x174/0x69c [<8077e9ac>] zs_init+0xc8/0xfc [<800404d4>] do_one_initcall+0x40/0x2ac [<8076cecc>] kernel_init_freeable+0x1e4/0x270 [<80605bec>] kernel_init+0x20/0x108 [<800431e8>] ret_from_kernel_thread+0x14/0x1c Code: 2442aeb0 ae120024 ae0200d0 <8c67002c> 50e00001 8c670000 3c06806e 3c05806e afb30010 ---[ end trace 0000000000000000 ]--- (report at the offending commit) -- where a pointer is dereferenced that has been derived from a null pointer to the port's parent device. Since no device is available with legacy probing and it's not anymore a preferable way to discover devices anyway, switch the driver to using a platform device and use it as the port's parent device. Update resource handling accordingly and only request the actual span of addresses used within the slot, which will have had its resource already requested by generic platform device code. Use platform_driver_probe() not just because SCC devices are fixed with solder on board and not straightforward to remove, but foremost because the associated TTY's major device number is the same as used by the dz driver and the first driver to claim it will prevent the other one from using it. Either one DZ device or some SCC devices will be present in a given system but never both at a time, and therefore we want the major device number to be claimed by the first driver to actually successfully bind to its device and platform_driver_probe() is a way to fulfil that. An unfortunate consequence of the switch to a platform device is we now hand the console over from the bootconsole much later in the bootstrap. The firmware console handler appears good enough though to work so late and in particular with interrupts enabled. Since there is one way only remaining to reach zs_reset() now, remove the port initialisation marker as no longer needed and go through the channel reset unconditionally.

CVE-2026-53961 6.5 Moyenne 10/07/2026 00:17

discourse · Discourse discourse

Discourse is an open-source discussion platform. Prior to 2026.6.0, 2026.5.1, 2026.4.2, and 2026.1.5, the AWS SES bounce webhook at POST /webhooks/aws verified that SNS messages were signed by Amazon but did not bind them to trusted TopicArn values, allowing any AWS account holder to publish validly signed forged Bounce notifications that revoke a targeted user email. This issue is fixed in versions 2026.6.0, 2026.5.1, 2026.4.2, and 2026.1.5.

CVE-2026-59215 3.1 Faible 09/07/2026 19:17

open-webui · Openwebui open webui

Open WebUI is an extensible, feature-rich, and user-friendly self-hosted AI platform. Prior to 0.10.0, channel thread parent and reply handling did not bind parent_id to the channel in the URL, allowing an authenticated user to reference a message from another private or DM channel and disclose thread context across channels. This issue is fixed in version 0.10.0.

CVE-2026-56139 5.3 Moyenne 06/07/2026 11:16

Apache Software Foundation Apache Camel Undertow · Apache camel

Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Undertow Component. The camel-undertow HTTP server consumer exposes a muteException option that controls what is returned to the client when a route processing error occurs. This option defaulted to false, whereas the other Camel HTTP server components (camel-http / camel-jetty / camel-servlet and camel-platform-http) default it to true. With muteException=false, when a request triggers an exception during route processing the consumer writes the full Throwable stack trace into the HTTP response body as text/plain instead of returning an empty body. Any unauthenticated client that can reach the endpoint and cause a processing error - for example by sending a malformed request body, an invalid parameter, or otherwise triggering a route-internal failure - therefore receives a complete Java stack trace. Such a stack trace can disclose sensitive internal information, including credentials embedded in exception messages, internal host names and IP addresses, filesystem paths, dependency and version details, database and class names, and the application's internal structure, which an attacker can use to plan further attacks. In addition, for Rest DSL consumers the muteException option was not honoured at all: the RestUndertowHttpBinding was created with a hard-coded false, so the stack trace was returned even when muteException=true had been configured. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, set muteException=true explicitly on the camel-undertow consumer (for example undertow: http://0.0.0.0:8080/api?muteException=true , or globally via the camel.component.undertow.mute-exception=true property), so that processing errors no longer return the stack trace to the client; note that on affected releases this workaround does not cover Rest DSL consumers, whose binding ignores the option until the fix is applied.

CVE-2026-49365 5.3 Moyenne 06/07/2026 11:16

Apache Software Foundation Apache Camel · Apache camel

Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Netty HTTP component. The camel-netty-http HTTP server consumer exposes a muteException option that controls what is returned to the client when a route processing error occurs. This option defaulted to false because the backing field was an uninitialised primitive boolean (Java's default of false), whereas the other Camel HTTP server components (camel-http / camel-jetty / camel-servlet and camel-platform-http) default it to true. With muteException=false, when a request triggers an exception during route processing the consumer writes the full Throwable stack trace into the HTTP response body as text/plain (via DefaultNettyHttpBinding) instead of returning an empty body. Any unauthenticated client that can reach the endpoint and cause a processing error - for example by sending a malformed request body, an invalid parameter, or otherwise triggering a route-internal failure - therefore receives a complete Java stack trace. Such a stack trace can disclose sensitive internal information, including credentials embedded in exception messages, internal host names and IP addresses, filesystem paths, dependency and version details, database and class names, and the application's internal structure, which an attacker can use to plan further attacks. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, set muteException=true explicitly on the camel-netty-http consumer (for example netty-http: http://0.0.0.0:8080/api?muteException=true , or globally via the camel.component.netty-http.configuration.mute-exception=true property), so that processing errors no longer return the stack trace to the client.

CVE-2026-56219 7.5 Élevée 01/07/2026 01:17

Capgo

Capgo before 12.128.2 contains a NULL-auth bypass vulnerability in the public.get_org_user_access_rbac function that allows unauthenticated attackers to retrieve RBAC role bindings and member email addresses. Attackers can exploit improper NULL comparison in the authorization gate to disclose organization membership, roles, and email addresses via the PostgREST RPC endpoint using only a public API key.

CVE-2026-13766 9.8 Critique 30/06/2026 14:16

EXODIST DBIx::QuickORM

DBIx::QuickORM versions before 0.000026 for Perl allow SQL injection via unquoted SQL identifiers. The default SQL builder, a SQL::Abstract subclass, sets bindtype in its constructor but never quote_char, so SQL::Abstract emits identifiers verbatim. Caller-supplied identifiers (order_by, where-clause column keys, field and returning lists, upsert columns, and join aliases) reach the SQL string raw, while values are placeholder-bound and unaffected. A caller that forwards untrusted input to an affected identifier position, such as a user-controlled order_by value, enables SQL injection: the row order can be made to depend on a sub-select over columns the query never selected, and the where and update identifier positions permit further data disclosure and tampering.

CVE-2026-50132 7.3 Élevée 26/06/2026 23:16

budibase · Budibase budibase

Budibase is an open-source low-code platform. Prior to 3.39.0, `GET /api/chat-links/:instance/:token/handoff` is a public endpoint (no auth required) that performs a permanent, state-changing operation: it binds an external chat identity (Slack/Discord/MS Teams) to an authenticated Budibase user account, with no consent UI and no CSRF protection. The session token in the URL is created by the attacker (from their own /link slash command) and embeds the attacker's externalUserId. When an authenticated Budibase victim visits the URL, their account is silently and permanently linked to the attacker's Slack/Discord identity. The server responds with "Authentication succeeded." — no indication of what was linked. This vulnerability is fixed in 3.39.0.

CVE-2026-52925 5.5 Moyenne 24/06/2026 10:16

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: vrf: Fix a potential NPD when removing a port from a VRF RCU readers that identified a net device as a VRF port using netif_is_l3_slave() assume that a subsequent call to netdev_master_upper_dev_get_rcu() will return a VRF device. They then continue to dereference its l3mdev operations. This assumption is not always correct and can result in a NPD [1]. There is no RCU synchronization when removing a port from a VRF, so it is possible for an RCU reader to see a new master device (e.g., a bridge) that does not have l3mdev operations. Fix by adding RCU synchronization after clearing the IFF_L3MDEV_SLAVE flag. Skip this synchronization when a net device is removed from a VRF as part of its deletion and when the VRF device itself is deleted. In the latter case an RCU grace period will pass by the time RTNL is released. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] RIP: 0010:l3mdev_fib_table_rcu (net/l3mdev/l3mdev.c:181) [...] Call Trace: <TASK> l3mdev_fib_table_by_index (net/l3mdev/l3mdev.c:201 net/l3mdev/l3mdev.c:189) __inet_bind (net/ipv4/af_inet.c:499 (discriminator 3)) inet_bind_sk (net/ipv4/af_inet.c:469) __sys_bind (./include/linux/file.h:62 (discriminator 1) ./include/linux/file.h:83 (discriminator 1) net/socket.c:1951 (discriminator 1)) __x64_sys_bind (net/socket.c:1969 (discriminator 1) net/socket.c:1967 (discriminator 1) net/socket.c:1967 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)

CVE-2026-48764 8.2 Élevée 18/06/2026 02:16

baptisteArno typebot.io

TypeBot is a chatbot builder tool. In versions prior to 3.17.2, SSRF validation is implemented by resolving a hostname once and checking whether the resolved IP belongs to a forbidden range allowing for DNS rebinding bypass. The root cause is a time-of-check to time-of-use gap in the SSRF guard. The validator resolves the hostname and approves it, but the later request path performs a fresh resolution and connects to whatever IP the hostname maps to at that moment. The actual outbound request is then performed later using the original hostname, without pinning the validated IP to the network connection. An attacker who can supply a URL to a public bot that performs a server-side HTTP Request block or server-side script fetch can use DNS rebinding to pass the initial validation and still force the server to connect to a private or metadata address during the real request. This enables server-side access to private network services, cloud metadata endpoints, and other internal HTTP targets that the validator was intended to block. The exact downstream impact depends on the reachable internal services. Concrete consequences include metadata disclosure, access to internal admin panels, credential theft from metadata services, and further compromise through internal-only HTTP interfaces. This issue has been fixed in version 3.17.2.

CVE-2026-12214 7.8 Élevée 15/06/2026 06:16

Qihoo 360 Total Security

A security flaw has been discovered in Qihoo 360 Total Security 6.0. This vulnerability affects the function RpcStringBindingComposeW of the component Nucleus Engine Monitoring Logic. Performing a manipulation of the argument NetworkAddr results in protection mechanism failure. The attack requires a local approach. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

CVE-2026-12208 5.3 Moyenne 15/06/2026 05:16

jsonata-js jsonata

A weakness has been identified in jsonata-js jsonata up to 2.2.0. The affected element is the function createFrame of the file src/jsonata.js of the component Function Binding Frame System. This manipulation causes improperly controlled modification of object prototype attributes. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

CVE-2026-54412 8.2 Élevée 14/06/2026 20:17

LiamBindle MQTT-C

LiamBindle MQTT-C through version 1.1.6 contains a heap-based out-of-bounds read and integer underflow in the mqtt_unpack_publish_response function in src/mqtt.c that allows a remote unauthenticated attacker controlling an MQTT broker - or able to inject MQTT traffic into an unencrypted session - to crash a subscribed MQTT-C client and potentially disclose adjacent heap memory by sending a single crafted PUBLISH packet.

CVE-2026-11769 8.8 Élevée 13/06/2026 08:16

Grafana Operator · Grafana grafana operator

We have released version 5.24.0 of the Grafana Operator. This patch includes a MEDIUM severity security fix for a path traversal/privilege escalation vulnerability in the Grafana Operator. ### Summary The Grafana Operator supports loading dashboards & library panels using the jsonnet data templating language. The jsonnet expression is evaluated in the context of the operator manager pod. ### Impact It is possible for a malicious user who can create Dashboard or LibraryPanel resources for a Grafana instance to obtain the Kubernetes service account token of the Grafana Operator manager. ### Affected versions All Grafana Operator versions <= 5.23 ### Solutions and mitigations All installations should be upgraded as soon as possible. As a workaround, the following ValidatingAdmissionPolicy prevent the creation or modification of jsonnet based resources: apiVersion: admissionregistration.k8s.io/v1 kind: ValidatingAdmissionPolicy metadata: name: "prevent-jsonnet-dashboards" spec: failurePolicy: Fail matchConstraints: resourceRules: - apiGroups: ["grafana.integreatly.org"] apiVersions: ["v1beta1"] operations: ["CREATE", "UPDATE"] resources: ["grafanadashboards", "grafanalibrarypanels"] validations: - expression: "!has(object.spec.jsonnetLib)" --- apiVersion: admissionregistration.k8s.io/v1 kind: ValidatingAdmissionPolicyBinding metadata: name: "prevent-jsonnet-dashboards-clusterwide" spec: policyName: "prevent-jsonnet-dashboards" validationActions: [Deny] ### Acknowledgement We would like to thank Artem Cherezov for responsibly disclosing the vulnerability.

CVE-2026-36819 7.5 Élevée 09/06/2026 21:17

Shenzhen Tenda Technology Co., Ltd Tenda W20E v15.11.0.6 was discovered to contain a buffer overflow in the bindMACAddr parameter of the fromSetDhcpRules function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.

CVE-2026-36797 7.5 Élevée 09/06/2026 21:17

Shenzhen Tenda Technology Co., Ltd Tenda G0 v15.11.0.5 was discovered to contain a stack overflow in the IPMacBindRuleIp parameter of the formIPMacBindModify function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.

CVE-2026-36618 4.3 Moyenne 03/06/2026 20:16

Mercusys AC12G (EU) V1 with firmware AC12G(EU)_V1_200909 responds to version.bind CHAOS TXT queries, disclosing the DNS resolver software version (unbound 1.22.0), aiding targeted attacks against known vulnerabilities.

CVE-2026-46055 7.1 Élevée 27/05/2026 16:17

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: apparmor: Fix string overrun due to missing termination When booting Ubuntu 26.04 with Linux 7.0-rc4 on an ARM64 Qualcomm Snapdragon X1 we see a string buffer overrun: BUG: KASAN: slab-out-of-bounds in aa_dfa_match (security/apparmor/match.c:535) Read of size 1 at addr ffff0008901cc000 by task snap-update-ns/2120 CPU: 5 UID: 60578 PID: 2120 Comm: snap-update-ns Not tainted 7.0.0-rc4+ #22 PREEMPTLAZY Hardware name: LENOVO 83ED/LNVNB161216, BIOS NHCN60WW 09/11/2025 Call trace: show_stack (arch/arm64/kernel/stacktrace.c:501) (C) dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:597) __asan_report_load1_noabort (mm/kasan/report_generic.c:378) aa_dfa_match (security/apparmor/match.c:535) match_mnt_path_str (security/apparmor/mount.c:244 security/apparmor/mount.c:336) match_mnt (security/apparmor/mount.c:371) aa_bind_mount (security/apparmor/mount.c:447 (discriminator 4)) apparmor_sb_mount (security/apparmor/lsm.c:719 (discriminator 1)) security_sb_mount (security/security.c:1062 (discriminator 31)) path_mount (fs/namespace.c:4101) __arm64_sys_mount (fs/namespace.c:4172 fs/namespace.c:4361 fs/namespace.c:4338 fs/namespace.c:4338) invoke_syscall.constprop.0 (arch/arm64/kernel/syscall.c:35 arch/arm64/kernel/syscall.c:49) el0_svc_common.constprop.0 (./include/linux/thread_info.h:142 (discriminator 2) arch/arm64/kernel/syscall.c:140 (discriminator 2)) do_el0_svc (arch/arm64/kernel/syscall.c:152) el0_svc (arch/arm64/kernel/entry-common.c:80 arch/arm64/kernel/entry-common.c:725) el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:744) el0t_64_sync (arch/arm64/kernel/entry.S:596) Allocated by task 2120: kasan_save_stack (mm/kasan/common.c:58) kasan_save_track (./arch/arm64/include/asm/current.h:19 mm/kasan/common.c:70 mm/kasan/common.c:79) kasan_save_alloc_info (mm/kasan/generic.c:571) __kasan_kmalloc (mm/kasan/common.c:419) __kmalloc_noprof (./include/linux/kasan.h:263 mm/slub.c:5260 mm/slub.c:5272) aa_get_buffer (security/apparmor/lsm.c:2201) aa_bind_mount (security/apparmor/mount.c:442) apparmor_sb_mount (security/apparmor/lsm.c:719 (discriminator 1)) security_sb_mount (security/security.c:1062 (discriminator 31)) path_mount (fs/namespace.c:4101) __arm64_sys_mount (fs/namespace.c:4172 fs/namespace.c:4361 fs/namespace.c:4338 fs/namespace.c:4338) invoke_syscall.constprop.0 (arch/arm64/kernel/syscall.c:35 arch/arm64/kernel/syscall.c:49) el0_svc_common.constprop.0 (./include/linux/thread_info.h:142 (discriminator 2) arch/arm64/kernel/syscall.c:140 (discriminator 2)) do_el0_svc (arch/arm64/kernel/syscall.c:152) el0_svc (arch/arm64/kernel/entry-common.c:80 arch/arm64/kernel/entry-common.c:725) el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:744) el0t_64_sync (arch/arm64/kernel/entry.S:596) The buggy address belongs to the object at ffff0008901ca000 which belongs to the cache kmalloc-rnd-06-8k of size 8192 The buggy address is located 0 bytes to the right of allocated 8192-byte region [ffff0008901ca000, ffff0008901cc000) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9101c8 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:-1 pincount:0 flags: 0x8000000000000040(head|zone=2) page_type: f5(slab) raw: 8000000000000040 ffff000800016c40 fffffdffe2d14e10 ffff000800015c70 raw: 0000000000000000 0000000800010001 00000000f5000000 0000000000000000 head: 8000000000000040 ffff000800016c40 fffffdffe2d14e10 ffff000800015c70 head: 0000000000000000 0000000800010001 00000000f5000000 0000000000000000 head: 8000000000000003 fffffdffe2407201 fffffdffffffffff 00000000ffffffff head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000008 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff0008901cbf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff0008 ---truncated---

CVE-2026-45866 7.8 Élevée 27/05/2026 16:16

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: serial: caif: fix use-after-free in caif_serial ldisc_close() There is a use-after-free bug in caif_serial where handle_tx() may access ser->tty after the tty has been freed. The race condition occurs between ldisc_close() and packet transmission: CPU 0 (close) CPU 1 (xmit) ------------- ------------ ldisc_close() tty_kref_put(ser->tty) [tty may be freed here] <-- race window --> caif_xmit() handle_tx() tty = ser->tty // dangling ptr tty->ops->write() // UAF! schedule_work() ser_release() unregister_netdevice() The root cause is that tty_kref_put() is called in ldisc_close() while the network device is still active and can receive packets. Since ser and tty have a 1:1 binding relationship with consistent lifecycles (ser is allocated in ldisc_open and freed in ser_release via unregister_netdevice, and each ser binds exactly one tty), we can safely defer the tty reference release to ser_release() where the network device is unregistered. Fix this by moving tty_kref_put() from ldisc_close() to ser_release(), after unregister_netdevice(). This ensures the tty reference is held as long as the network device exists, preventing the UAF. Note: We save ser->tty before unregister_netdevice() because ser is embedded in netdev's private data and will be freed along with netdev (needs_free_netdev = true). How to reproduce: Add mdelay(500) at the beginning of ldisc_close() to widen the race window, then run the reproducer program [1]. Note: There is a separate deadloop issue in handle_tx() when using PORT_UNKNOWN serial ports (e.g., /dev/ttyS3 in QEMU without proper serial backend). This deadloop exists even without this patch, and is likely caused by inconsistency between uart_write_room() and uart_write() in serial core. It has been addressed in a separate patch [2]. KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in handle_tx+0x5d1/0x620 Read of size 1 at addr ffff8881131e1490 by task caif_uaf_trigge/9929 Call Trace: <TASK> dump_stack_lvl+0x10e/0x1f0 print_report+0xd0/0x630 kasan_report+0xe4/0x120 handle_tx+0x5d1/0x620 dev_hard_start_xmit+0x9d/0x6c0 __dev_queue_xmit+0x6e2/0x4410 packet_xmit+0x243/0x360 packet_sendmsg+0x26cf/0x5500 __sys_sendto+0x4a3/0x520 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0xc9/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f615df2c0d7 Allocated by task 9930: Freed by task 64: Last potentially related work creation: The buggy address belongs to the object at ffff8881131e1000 which belongs to the cache kmalloc-cg-2k of size 2048 The buggy address is located 1168 bytes inside of freed 2048-byte region [ffff8881131e1000, ffff8881131e1800) The buggy address belongs to the physical page: page_owner tracks the page as allocated page last free pid 9778 tgid 9778 stack trace: Memory state around the buggy address: ffff8881131e1380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881131e1400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881131e1480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881131e1500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881131e1580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== [1]: https://gist.github.com/mrpre/f683f244544f7b11e7fa87df9e6c2eeb [2]: https://lore.kernel.org/linux-serial/20260204074327.226165-1-jiayuan.chen@linux.dev/T/#u

CVE-2026-9284 8.2 Élevée 23/05/2026 07:16

WooCommerce PayPal Payments

The WooCommerce PayPal Payments plugin for WordPress is vulnerable to unauthorized order manipulation and information disclosure due to missing authorization checks on the `ppc-create-order` and `ppc-get-order` WC-AJAX endpoints in all versions up to, and including, 4.0.1. The `ppc-create-order` endpoint accepts an arbitrary WooCommerce order ID in the `pay-now` context without validating order ownership, allowing attackers to create PayPal orders for any WC order and write PayPal metadata to it. The `ppc-get-order` endpoint returns full PayPal order details for any PayPal order ID without binding to the requester's session. This makes it possible for unauthenticated attackers to chain these endpoints to manipulate other customers' order payment flows and exfiltrate sensitive order details (payer information, shipping data) by creating a PayPal order for a victim's WC order and then retrieving the PayPal order data.

CVE-2026-5950 5.3 Moyenne 20/05/2026 15:16

ISC BIND 9 · Isc bind

An unbounded resend loop vulnerability exists in the BIND 9 resolver state machine during bad-server handling, enabling a remote unauthenticated attacker to cause severe resource exhaustion by sending queries that trigger specific retry conditions. This issue affects BIND 9 versions 9.18.36 through 9.18.48, 9.20.8 through 9.20.22, 9.21.7 through 9.21.21, 9.18.36-S1 through 9.18.48-S1, and 9.20.9-S1 through 9.20.22-S1.

CVE-2026-5947 5.9 Moyenne 20/05/2026 15:16

ISC BIND 9 · Red Hat Hardened Images · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6

Undefined behavior may result due to a race condition leading to a use-after-free violation. If BIND receives an incoming DNS message signed with SIG(0), it begins work to validate that signature. If, during that validation, the "recursive-clients" limit is reached (as would occur during a query flood), and that same DNS message is discarded per the limit, there is a brief window of time while the SIG(0) validation may attempt to read the now-discarded DNS message. This issue affects BIND 9 versions 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, and 9.20.9-S1 through 9.20.22-S1. BIND 9 versions 9.18.28 through 9.18.49 and 9.18.28-S1 through 9.18.49-S1 are NOT affected.

CVE-2026-5946 7.5 Élevée 20/05/2026 15:16

ISC BIND 9 · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 7 Extended Lifecycle Support · Red Hat Enterprise Linux 8

Multiple flaws have been identified in `named` related to the handling of DNS messages whose CLASS is not Internet (`IN`) — for example, `CHAOS` or `HESIOD`, or DNS messages that specify meta-classes (`ANY` or `NONE`) in the question section. Specially crafted requests reaching the affected code paths — recursion, dynamic updates (`UPDATE`), zone change notifications (`NOTIFY`), or processing of `IN`-specific record types in non-`IN` data — can cause assertion failures in `named`. This issue affects BIND 9 versions 9.11.0 through 9.16.50, 9.18.0 through 9.18.48, 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, 9.11.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.48-S1, and 9.20.9-S1 through 9.20.22-S1.

CVE-2026-3593 9.8 Critique 20/05/2026 15:16

ISC BIND 9 · Red Hat Hardened Images · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6

A use-after-free vulnerability exists within the DNS-over-HTTPS implementation. This issue affects BIND 9 versions 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, and 9.20.9-S1 through 9.20.22-S1. BIND 9 versions 9.18.0 through 9.18.48 and 9.18.11-S1 through 9.18.48-S1 are NOT affected.

CVE-2026-3592 5.3 Moyenne 20/05/2026 15:16

ISC BIND 9 · Isc bind

BIND resolvers are vulnerable to an amplified resource consumption/exhaustion attack. If a victim resolver makes a query to a specially crafted zone, the resolver will consume disproportionate resources. This issue affects BIND 9 versions 9.11.0 through 9.16.50, 9.18.0 through 9.18.48, 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, 9.11.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.48-S1, and 9.20.9-S1 through 9.20.22-S1.

CVE-2026-3039 7.5 Élevée 20/05/2026 15:16

ISC BIND 9 · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 7 Extended Lifecycle Support · Red Hat Enterprise Linux 8

BIND servers that are configured to use TKEY-based authentication via GSS-API tokens are vulnerable to excessive memory consumption when receiving and processing maliciously-constructed packets. Typically these servers will be found in Active Directory integrated DNS deployments and/or Kerberos-secured DNS environments. This issue affects BIND 9 versions 9.0.0 through 9.16.50, 9.18.0 through 9.18.48, 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, 9.9.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.48-S1, and 9.20.9-S1 through 9.20.22-S1.

CVE-2026-43479 5.5 Moyenne 13/05/2026 18:16

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: net: usb: lan78xx: fix WARN in __netif_napi_del_locked on disconnect Remove redundant netif_napi_del() call from disconnect path. A WARN may be triggered in __netif_napi_del_locked() during USB device disconnect: WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350 This happens because netif_napi_del() is called in the disconnect path while NAPI is still enabled. However, it is not necessary to call netif_napi_del() explicitly, since unregister_netdev() will handle NAPI teardown automatically and safely. Removing the redundant call avoids triggering the warning. Full trace: lan78xx 1-1:1.0 enu1: Failed to read register index 0x000000c4. ret = -ENODEV lan78xx 1-1:1.0 enu1: Failed to set MAC down with error -ENODEV lan78xx 1-1:1.0 enu1: Link is Down lan78xx 1-1:1.0 enu1: Failed to read register index 0x00000120. ret = -ENODEV ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350 Modules linked in: flexcan can_dev fuse CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 6.16.0-rc2-00624-ge926949dab03 #9 PREEMPT Hardware name: SKOV IMX8MP CPU revC - bd500 (DT) Workqueue: usb_hub_wq hub_event pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __netif_napi_del_locked+0x2b4/0x350 lr : __netif_napi_del_locked+0x7c/0x350 sp : ffffffc085b673c0 x29: ffffffc085b673c0 x28: ffffff800b7f2000 x27: ffffff800b7f20d8 x26: ffffff80110bcf58 x25: ffffff80110bd978 x24: 1ffffff0022179eb x23: ffffff80110bc000 x22: ffffff800b7f5000 x21: ffffff80110bc000 x20: ffffff80110bcf38 x19: ffffff80110bcf28 x18: dfffffc000000000 x17: ffffffc081578940 x16: ffffffc08284cee0 x15: 0000000000000028 x14: 0000000000000006 x13: 0000000000040000 x12: ffffffb0022179e8 x11: 1ffffff0022179e7 x10: ffffffb0022179e7 x9 : dfffffc000000000 x8 : 0000004ffdde8619 x7 : ffffff80110bcf3f x6 : 0000000000000001 x5 : ffffff80110bcf38 x4 : ffffff80110bcf38 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 1ffffff0022179e7 x0 : 0000000000000000 Call trace: __netif_napi_del_locked+0x2b4/0x350 (P) lan78xx_disconnect+0xf4/0x360 usb_unbind_interface+0x158/0x718 device_remove+0x100/0x150 device_release_driver_internal+0x308/0x478 device_release_driver+0x1c/0x30 bus_remove_device+0x1a8/0x368 device_del+0x2e0/0x7b0 usb_disable_device+0x244/0x540 usb_disconnect+0x220/0x758 hub_event+0x105c/0x35e0 process_one_work+0x760/0x17b0 worker_thread+0x768/0xce8 kthread+0x3bc/0x690 ret_from_fork+0x10/0x20 irq event stamp: 211604 hardirqs last enabled at (211603): [<ffffffc0828cc9ec>] _raw_spin_unlock_irqrestore+0x84/0x98 hardirqs last disabled at (211604): [<ffffffc0828a9a84>] el1_dbg+0x24/0x80 softirqs last enabled at (211296): [<ffffffc080095f10>] handle_softirqs+0x820/0xbc8 softirqs last disabled at (210993): [<ffffffc080010288>] __do_softirq+0x18/0x20 ---[ end trace 0000000000000000 ]--- lan78xx 1-1:1.0 enu1: failed to kill vid 0081/0

CVE-2026-45321 9.6 Critique Exploitée Rançongiciel 12/05/2026 03:16

@tanstack arktype-adapter · @tanstack eslint-plugin-router · @tanstack eslint-plugin-start · @tanstack history

On 2026-05-11, between approximately 19:20 and 19:26 UTC, 84 malicious versions across 42 @tanstack/* packages were published to the npm registry. The publishes were authenticated via the legitimate GitHub Actions OIDC trusted-publisher binding for TanStack/router, but the publish workflow itself was not modified. The attacker chained three known vulnerability classes — a pull_request_target "Pwn Request" misconfiguration, GitHub Actions cache poisoning across the fork↔base trust boundary, and runtime memory extraction of the OIDC token from the Actions runner process — to publish credential-stealing malware under a trusted identity. Each affected package received exactly two malicious versions, published a few minutes apart.

CVE-2026-43459 7.3 Élevée 08/05/2026 17:16

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-core: flush delayed work before removing DAIs and widgets When a sound card is unbound while a PCM stream is open, a use-after-free can occur in snd_soc_dapm_stream_event(), called from the close_delayed_work workqueue handler. During unbind, snd_soc_unbind_card() flushes delayed work and then calls soc_cleanup_card_resources(). Inside cleanup, snd_card_disconnect_sync() releases all PCM file descriptors, and the resulting PCM close path can call snd_soc_dapm_stream_stop() which schedules new delayed work with a pmdown_time timer delay. Since this happens after the flush in snd_soc_unbind_card(), the new work is not caught. soc_remove_link_components() then frees DAPM widgets before this work fires, leading to the use-after-free. The existing flush in soc_free_pcm_runtime() also cannot help as it runs after soc_remove_link_components() has already freed the widgets. Add a flush in soc_cleanup_card_resources() after snd_card_disconnect_sync() (after which no new PCM closes can schedule further delayed work) and before soc_remove_link_dais() and soc_remove_link_components() (which tear down the structures the delayed work accesses).

CVE-2026-43421 5.5 Moyenne 08/05/2026 17:16

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: Fix net_device lifecycle with device_move The network device outlived its parent gadget device during disconnection, resulting in dangling sysfs links and null pointer dereference problems. A prior attempt to solve this by removing SET_NETDEV_DEV entirely [1] was reverted due to power management ordering concerns and a NO-CARRIER regression. A subsequent attempt to defer net_device allocation to bind [2] broke 1:1 mapping between function instance and network device, making it impossible for configfs to report the resolved interface name. This results in a regression where the DHCP server fails on pmOS. Use device_move to reparent the net_device between the gadget device and /sys/devices/virtual/ across bind/unbind cycles. This preserves the network interface across USB reconnection, allowing the DHCP server to retain their binding. Introduce gether_attach_gadget()/gether_detach_gadget() helpers and use __free(detach_gadget) macro to undo attachment on bind failure. The bind_count ensures device_move executes only on the first bind. [1] https://lore.kernel.org/lkml/f2a4f9847617a0929d62025748384092e5f35cce.camel@crapouillou.net/ [2] https://lore.kernel.org/linux-usb/795ea759-7eaf-4f78-81f4-01ffbf2d7961@ixit.cz/

CVE-2026-43314 5.5 Moyenne 08/05/2026 16:16

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: dm: remove fake timeout to avoid leak request Since commit 15f73f5b3e59 ("blk-mq: move failure injection out of blk_mq_complete_request"), drivers are responsible for calling blk_should_fake_timeout() at appropriate code paths and opportunities. However, the dm driver does not implement its own timeout handler and relies on the timeout handling of its slave devices. If an io-timeout-fail error is injected to a dm device, the request will be leaked and never completed, causing tasks to hang indefinitely. Reproduce: 1. prepare dm which has iscsi slave device 2. inject io-timeout-fail to dm echo 1 >/sys/class/block/dm-0/io-timeout-fail echo 100 >/sys/kernel/debug/fail_io_timeout/probability echo 10 >/sys/kernel/debug/fail_io_timeout/times 3. read/write dm 4. iscsiadm -m node -u Result: hang task like below [ 862.243768] INFO: task kworker/u514:2:151 blocked for more than 122 seconds. [ 862.244133] Tainted: G E 6.19.0-rc1+ #51 [ 862.244337] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 862.244718] task:kworker/u514:2 state:D stack:0 pid:151 tgid:151 ppid:2 task_flags:0x4288060 flags:0x00080000 [ 862.245024] Workqueue: iscsi_ctrl_3:1 __iscsi_unbind_session [scsi_transport_iscsi] [ 862.245264] Call Trace: [ 862.245587] <TASK> [ 862.245814] __schedule+0x810/0x15c0 [ 862.246557] schedule+0x69/0x180 [ 862.246760] blk_mq_freeze_queue_wait+0xde/0x120 [ 862.247688] elevator_change+0x16d/0x460 [ 862.247893] elevator_set_none+0x87/0xf0 [ 862.248798] blk_unregister_queue+0x12e/0x2a0 [ 862.248995] __del_gendisk+0x231/0x7e0 [ 862.250143] del_gendisk+0x12f/0x1d0 [ 862.250339] sd_remove+0x85/0x130 [sd_mod] [ 862.250650] device_release_driver_internal+0x36d/0x530 [ 862.250849] bus_remove_device+0x1dd/0x3f0 [ 862.251042] device_del+0x38a/0x930 [ 862.252095] __scsi_remove_device+0x293/0x360 [ 862.252291] scsi_remove_target+0x486/0x760 [ 862.252654] __iscsi_unbind_session+0x18a/0x3e0 [scsi_transport_iscsi] [ 862.252886] process_one_work+0x633/0xe50 [ 862.253101] worker_thread+0x6df/0xf10 [ 862.253647] kthread+0x36d/0x720 [ 862.254533] ret_from_fork+0x2a6/0x470 [ 862.255852] ret_from_fork_asm+0x1a/0x30 [ 862.256037] </TASK> Remove the blk_should_fake_timeout() check from dm, as dm has no native timeout handling and should not attempt to fake timeouts.

CVE-2026-31726 5.5 Moyenne 01/05/2026 17:16

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: fix NULL pointer dereference during unbind race Commit b81ac4395bbe ("usb: gadget: uvc: allow for application to cleanly shutdown") introduced two stages of synchronization waits totaling 1500ms in uvc_function_unbind() to prevent several types of kernel panics. However, this timing-based approach is insufficient during power management (PM) transitions. When the PM subsystem starts freezing user space processes, the wait_event_interruptible_timeout() is aborted early, which allows the unbind thread to proceed and nullify the gadget pointer (cdev->gadget = NULL): [ 814.123447][ T947] configfs-gadget.g1 gadget.0: uvc: uvc_function_unbind() [ 814.178583][ T3173] PM: suspend entry (deep) [ 814.192487][ T3173] Freezing user space processes [ 814.197668][ T947] configfs-gadget.g1 gadget.0: uvc: uvc_function_unbind no clean disconnect, wait for release When the PM subsystem resumes or aborts the suspend and tasks are restarted, the V4L2 release path is executed and attempts to access the already nullified gadget pointer, triggering a kernel panic: [ 814.292597][ C0] PM: pm_system_irq_wakeup: 479 triggered dhdpcie_host_wake [ 814.386727][ T3173] Restarting tasks ... [ 814.403522][ T4558] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 [ 814.404021][ T4558] pc : usb_gadget_deactivate+0x14/0xf4 [ 814.404031][ T4558] lr : usb_function_deactivate+0x54/0x94 [ 814.404078][ T4558] Call trace: [ 814.404080][ T4558] usb_gadget_deactivate+0x14/0xf4 [ 814.404083][ T4558] usb_function_deactivate+0x54/0x94 [ 814.404087][ T4558] uvc_function_disconnect+0x1c/0x5c [ 814.404092][ T4558] uvc_v4l2_release+0x44/0xac [ 814.404095][ T4558] v4l2_release+0xcc/0x130 Address the race condition and NULL pointer dereference by: 1. State Synchronization (flag + mutex) Introduce a 'func_unbound' flag in struct uvc_device. This allows uvc_function_disconnect() to safely skip accessing the nullified cdev->gadget pointer. As suggested by Alan Stern, this flag is protected by a new mutex (uvc->lock) to ensure proper memory ordering and prevent instruction reordering or speculative loads. This mutex is also used to protect 'func_connected' for consistent state management. 2. Explicit Synchronization (completion) Use a completion to synchronize uvc_function_unbind() with the uvc_vdev_release() callback. This prevents Use-After-Free (UAF) by ensuring struct uvc_device is freed after all video device resources are released.

CVE-2026-40904 8.1 Élevée 30/04/2026 21:16

chartbrew

Chartbrew is an open-source web application that can connect directly to databases and APIs and use the data to create charts. In version 4.9.0, Chartbrew exposes multiple dataset and dataRequest endpoints that authorize low-privileged project members at the team level instead of binding the requested dataset_id, dataRequest id, and connection_id to the caller's allowed projects. An authenticated attacker who only has access to one project inside a team can read, execute, create, update, and delete datasets and data requests that belong to other projects in the same team. The issue is exploitable remotely with ordinary project-level credentials and leads to cross-project data disclosure and unauthorized use of victim-side database or API connections. This issue has been patched in version 5.0.0.

CVE-2026-7078 8.8 Élevée 27/04/2026 05:15

Tenda F456 · Tenda f456 firmware

A security flaw has been discovered in Tenda F456 1.0.0.5. The impacted element is the function fromSetIpBind of the file /goform/SetIpBind of the component httpd. The manipulation of the argument page results in buffer overflow. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks.

CVE-2022-22965 9.8 Critique Exploitée 02/04/2022 01:15

Spring Framework · Vmware spring framework · Cisco cx cloud agent · Oracle communications cloud native core automated test suite

A Spring MVC or Spring WebFlux application running on JDK 9+ may be vulnerable to remote code execution (RCE) via data binding. The specific exploit requires the application to run on Tomcat as a WAR deployment. If the application is deployed as a Spring Boot executable jar, i.e. the default, it is not vulnerable to the exploit. However, the nature of the vulnerability is more general, and there may be other ways to exploit it.

CVE-2015-5477 7.5 Élevée Exploitée 29/07/2015 16:59

Juniper junos · Fedoraproject fedora · Redhat enterprise linux · Redhat enterprise linux aus

named in ISC BIND 9.x before 9.9.7-P2 and 9.10.x before 9.10.2-P3 allows remote attackers to cause a denial of service (REQUIRE assertion failure and daemon exit) via TKEY queries.