Veille CVE

Semaine du 19 octobre au 25 octobre 2026

8 CVE

Critique 0 Élevée 1 Moyenne 4 Faible 1 Non évaluée 2 Exploitées (KEV) Tri : plus récentes « cursor » ✕
  1. CVE-2026-115774 4.9 Moyenne

    twisted

    Twisted is an event-based framework for internet applications, supporting Python 3.6+. Prior to 26.10.0rc1, twisted.mail.imap4.IMAP4Server reaches twisted.mail.imap4.parseNestedParens with a negative literal size in an authenticated SEARCH command after the client enters the selected mailbox state. The negative size moves the parser cursor below zero, and Python's negative indexing prevents the synchronous scanning loop from terminating. The loop freezes the single-threaded reactor, stopping other IMAP connections and any SMTP or POP3 services hosted in the same process until restart. This issue is fixed in version 26.10.0rc1.

  2. CVE-2026-99025 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: openvswitch: fix soft lockup in the netlink flow dump A production compute node carrying a few thousand datapath flows hit a soft lockup inside a single netlink flow dump and panicked. ovs_flow_cmd_dump() calls ovs_flow_stats_get() for every flow it emits, and that releases stats->lock with spin_unlock_bh() once per CPU that has touched the flow. Every release is a local_bh_enable(), and each one runs the pending softirq backlog in the dumping thread's own context. The skb bounds the flows one callback emits, but not the softirq work it absorbs. On a CPU that carries the box's packet load the backlog refills as fast as it drains, so the dumping thread becomes that CPU's softirq engine. It never sleeps and it has no reschedule point, so under voluntary preemption nothing can take the CPU away from it: neither the ksoftirqd the kernel woke to take the work over, nor the stopper thread the softlockup detector dispatches to refresh its timestamp. Hold BH off across the whole callback instead, the way ctnetlink_dump_table() does, so the nested spin_unlock_bh() stop draining softirqs. The loop already runs under rcu_read_lock() and cannot sleep. What it gives up is preemption under CONFIG_PREEMPT, since a BH-off region is not preemptible outside PREEMPT_RT. The region stays short: the skb caps the flows one callback emits, and empty buckets cost no skb space but are each visited once per dump, as the cursor only moves forward. The table grows on insert and shrinks only on flush, so the walk is bounded by the largest flow count the datapath has held. The softirq backlog the callback used to absorb has no bound at all.

  3. CVE-2026-99002 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: validate pitch coming from userspace Validate the pitch, alongside the box dimensions before trying to copy data from the underlying surface. Fixes possible out of bounds reads with cursor snooping.

  4. CVE-2026-115509 4.2 Moyenne

    jitsucom jitsu

    Jitsu console before 2.14.0-beta.41 contains an incorrect authorization vulnerability in sources/state.ts handlers that call findFirst without await, so the syncId ownership check never fails. Authenticated users knowing another workspace's sync ID can read, overwrite or delete its stream cursors, causing data re-ingestion or skipped data.

  5. CVE-2026-105938 2.3 Faible

    Apache Software Foundation Apache Pulsar

    Apache Pulsar namespaces can restrict which roles may use a subscription, either with the Prefix subscription authentication mode, which requires a subscription name to start with the role name, or by granting permission on a subscription to specific roles. Topic-level subscription operations, such as consuming, skipping messages, resetting a cursor or deleting a subscription, apply these subscription policies. Several admin REST API operations that act on subscriptions did not apply them: - the namespace-level and bundle-level clear backlog operations, both for a named subscription and for all subscriptions; - the namespace-level and bundle-level unsubscribe operations; - the topic-level operation that expires messages for all subscriptions of a topic. With the default authorization provider, the namespace-level operations require only consume permission granted on the namespace, and the expire-all operation requires only consume permission on the topic. As a result, when authentication and authorization are enabled and a namespace uses the Prefix subscription authentication mode or subscription permissions, an authenticated user with such consume permission can clear the backlog of, expire messages of, or delete a subscription that the policies would deny to that user. Tenant admin or superuser access is not required. The clear backlog operations can also be applied to the cursors used for geo-replication, so that messages not yet replicated to a remote cluster are skipped. Deployments that do not configure the Prefix subscription authentication mode or subscription permissions (the defaults) are not affected by this bypass, because consume permission on the namespace or topic already allows these operations there. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be different. The impact is on the integrity of subscription state. Clearing or expiring the backlog moves the subscription's cursor forward, so unacknowledged messages are no longer delivered to the subscription's consumers. The unsubscribe operation deletes a subscription that has no connected consumers. Skipped messages can be permanently deleted once no other subscription or the namespace's retention policy keeps them. The issue does not allow reading message contents, changing permissions or policies, or accessing other namespaces, and it does not affect the availability of the broker. In fixed versions, the namespace-level and bundle-level operations for a named subscription apply the subscription policies to that subscription, and the operations for all subscriptions, when requested by a user who is not a tenant admin or superuser, only act on the subscriptions that the user may access. Clearing the backlog of geo-replication cursors requires tenant admin or superuser access. Topic-level subscription operations apply the subscription policies for all types of authentication data, including that of the anonymous user role. This issue affects Apache Pulsar versions from 2.8.0 before 4.0.14 and from 4.1.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. All brokers in a cluster must be upgraded before relying on the namespace-level restrictions, because brokers that have not been upgraded do not apply them when they receive the internal per-bundle requests. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. Users who cannot upgrade immediately can reduce exposure by restricting network access to the broker's admin REST API to trusted administrative clients.

  6. CVE-2026-105934 7.2 Élevée

    Apache Software Foundation Apache Pulsar

    The Apache Pulsar broker admin REST API provides a truncate operation for persistent topics (DELETE /admin/v2/persistent/{tenant}/{namespace}/{topic}/truncate). Truncating a topic moves all subscription cursors of the topic to the end of the topic and deletes the topic's inactive ledgers. Truncating a non-partitioned topic, or a single partition addressed by its partition name, correctly requires the tenant admin role or the superuser role. When the operation is requested for the name of a partitioned topic, the broker does not apply this tenant admin check to the caller. Instead, it truncates each partition using the broker's own internal admin client, which authenticates with the broker's configured client credentials rather than the caller's identity. Each per-partition truncate request is still checked for the tenant admin role or the superuser role, but against the broker's internal identity instead of the caller. The partitions are therefore truncated only when the broker's configured client role is a superuser or an admin of the target tenant, which is the usual configuration when authorization is enabled. As a result, when that condition holds, an authenticated user who is not a tenant admin can truncate any partitioned topic on which the user has lookup permission. Caller authentication and lookup permission alone are not sufficient: if the broker's internal identity lacks tenant admin or superuser authorization for the target tenant, the per-partition requests are rejected. With the default authorization provider, lookup permission is granted by produce or consume permission on the topic or its namespace. A user with no permissions on the topic cannot trigger the issue. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be different. Truncating a partitioned topic this way moves the cursors of all subscriptions on every partition to the end of the topic, so any unacknowledged backlog is skipped and is no longer delivered to consumers. It also deletes eligible older ledgers of each partition regardless of the namespace's configured retention policy, so messages stored in those ledgers can be permanently lost. The ledger currently being written is not deleted by the truncate operation. The issue does not allow reading message contents or changing permissions or configuration, and it does not give access to topics on which the user has no lookup permission. This issue affects Apache Pulsar versions from 2.8.0 before 4.0.14 and from 4.1.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. Users who cannot upgrade immediately can reduce exposure by restricting network access to the broker's admin REST API (/admin/v2) to trusted administrative clients.

  7. CVE-2026-96406 4.9 Moyenne

    Eclipse Foundation Eclipse ThreadX - USBX

    A VideoStreaming interface reports the size of its whole class-specific descriptor block in the `wTotalLength` field of its input header. The USBX host recorded that figure and used it as the budget for walking the format, frame and frame-interval descriptors, without holding it against the configuration descriptor actually received. A device that reports a `wTotalLength` larger than the descriptors it supplies therefore had its own claim believed. Once the real bytes ran out the walk kept going, dereferencing the cursor past the end of the configuration buffer, in the host's context, whenever the application queried format or frame data.

  8. CVE-2026-112272 5.5 Moyenne

    emersion libdisplay-info

    Libdisplay-info 0.4.0 contains a heap out-of-bounds read vulnerability in the DisplayID v2 section parser in displayid2.c that allows attackers to read past the EDID buffer via oversized data block lengths. Attackers can supply a crafted EDID from a malicious monitor, KVM, capture device, or file to over-advance the parse cursor and crash applications.