Vendredi 23 octobre 2026

Linux

In the Linux kernel, the following vulnerability has been resolved: perf/core: Check kernel access when kernel callchains are requested perf_event_open() currently gates perf_allow_kernel() only on !attr.exclude_kernel. However, users can still request kernel callchain collection with attr.exclude_callchain_kernel == 0 even when attr.exclude_kernel == 1. That still requires kernel profiling privilege, but the existing check does not enforce it. Update the permission check to call perf_allow_kernel() when either kernel sampling is requested or kernel callchains are requested. This keeps permission checks aligned with requested data and prevents unprivileged use of kernel callchain capture.

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: reset ar->num_stations on hardware start When (multiple) hw restart occurs, we end up in a situation where we cannot accept new stations / mesh peers. This seems to be the 'num_stations' in 'struct ath11k' that did not get reset properly in this case. In ath11k_mac_op_start(), it was indeed the only accounting var that did not get reset so let's clear it too. This avoids problems like those: [1248828.088023] WARNING: CPU: 0 PID: 12281 at net/mac80211/util.c:1682 ieee80211_reconfig_stations+0x98/0xc0 [1248828.088115] Call trace: [1248828.088116] ieee80211_reconfig_stations+0x98/0xc0 (P) [1248828.088119] ieee80211_reconfig+0x774/0x1438 [1248828.088123] ieee80211_restart_work+0x10c/0x178 [1248828.088127] process_one_work+0x178/0x3c0 [1248828.088130] worker_thread+0x280/0x440 [1248828.088133] kthread+0xe0/0xf8 [1248828.088137] ret_from_fork+0x10/0x20 [1248828.088141] ---[ end trace 0000000000000000 ]--- [1248836.686604] ath11k_pci 0000:04:00.0: refusing to associate station: too many connected already (128) [1248836.686609] ath11k_pci 0000:04:00.0: Failed to add station: xx:xx:xx:xx:xx:xx for VDEV: 1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1

Linux

In the Linux kernel, the following vulnerability has been resolved: rtc: dev: zero-initialize struct rtc_wkalrm to prevent information leak The struct rtc_wkalrm has padding holes after the 'pending' member. When returned to userspace via the RTC_WKALRM_RD ioctl, uninitialized kernel stack data residing in these holes may be leaked. Zero-initialize the struct at declaration to eliminate this information leak risk. Fixes smatch warnings: - drivers/rtc/dev.c:392 rtc_dev_ioctl() warn: check that 'alarm' doesn't leak information (struct has a hole after 'pending')

Linux

In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: use skb_get_hash_net() in seg6_make_flowlabel() Since commit d58e468b1112 ("flow_dissector: implements flow dissector BPF hook") __skb_flow_dissect() needs a net pointer, either from skb->dev, skb->sk, or since commit 3cbf4ffba5ee ("net: plumb network namespace into __skb_flow_dissect") a caller provided pointer. syzbot was able to reach seg6_make_flowlabel() with an skb having neither skb->dev nor skb->sk set: a TIPC UDP bearer sends a discovery message through an IPv4 route using seg6 encap, while net.ipv6.seg6_flowlabel is set to 1. seg6_make_flowlabel() already has a net pointer, use skb_get_hash_net(). WARNING: net/core/flow_dissector.c:1131 at __skb_flow_dissect+0x910/0x5368 net/core/flow_dissector.c:1126, CPU#0: syz.0.17/4930 Call trace: __skb_flow_dissect+0x910/0x5368 net/core/flow_dissector.c:1126 (P) __skb_get_hash_net+0xe0/0x29c net/core/flow_dissector.c:1903 skb_get_hash include/linux/skbuff.h:1663 [inline] seg6_make_flowlabel+0xcc/0x1ec net/ipv6/seg6_iptunnel.c:132 __seg6_do_srh_encap+0x320/0xbf4 net/ipv6/seg6_iptunnel.c:161 seg6_do_srh+0x4b4/0xa44 net/ipv6/seg6_iptunnel.c:431 seg6_output_core+0x164/0x688 net/ipv6/seg6_iptunnel.c:681 seg6_output+0x44/0x1ac net/ipv6/seg6_iptunnel.c:744 lwtunnel_output+0x3d0/0x664 net/core/lwtunnel.c:356 dst_output include/net/dst.h:470 [inline] ip_local_out+0x110/0x148 net/ipv4/ip_output.c:131 iptunnel_xmit+0x50c/0xd38 net/ipv4/ip_tunnel_core.c:97 udp_tunnel_xmit_skb+0x220/0x348 net/ipv4/udp_tunnel_core.c:187 tipc_udp_xmit+0x75c/0x9c0 net/tipc/udp_media.c:202 tipc_udp_send_msg+0x214/0x374 net/tipc/udp_media.c:274 tipc_bearer_xmit_skb+0x260/0x3b0 net/tipc/bearer.c:576 tipc_enable_bearer net/tipc/bearer.c:366 [inline] __tipc_nl_bearer_enable+0xc90/0xfb0 net/tipc/bearer.c:1048 tipc_nl_bearer_enable+0x2c/0x48 net/tipc/bearer.c:1057 genl_family_rcv_msg_doit+0x1e4/0x2d4 net/netlink/genetlink.c:1114

Linux

In the Linux kernel, the following vulnerability has been resolved: usb: hub: use shorter 120ms post resume hold for SS root hubs Holding a USB3 hub PM runtime reference for 200ms at hub resume triggers an AMD platform issue. Users running Android adb report crashes after adb has been polling and waking up the USB subsystem once a second for some time. Vendors are working on a solution. Disabling USB runtime PM is one way to prevent this issue, but it is also proven that reducing the hold time to 120ms in resume also mitigates it. See Link for more details. Reducing the hold time to 120ms for the USB3 roothub is in itself a valid change and optimization, as the current 200ms is excessive: a root hub has no upstream suspended hub whose wake propagation needs to be accounted for, but still need some time for USB3 link training to complete. Keep the 200ms hold for external hubs that commit 8f5b7e2bec1c ("usb: hub: fix detection of high tier USB3 devices behind suspended hubs") is intended for.

Linux

In the Linux kernel, the following vulnerability has been resolved: EDAC/altera: Fix use-after-free in error paths In both altr_edac_a10_device_add() and altr_portb_setup(), the error path freed the dci structure before releasing the devres group. Since the managed single and double bit IRQ handlers use altdev(dci->pvt_info) as their data, an IRQ firing between freeing dci and unregistering the IRQs could dereference the freed memory. Release the devres group first so the managed IRQs are unregistered before the dci structure is freed.

Linux

In the Linux kernel, the following vulnerability has been resolved: mtd: spinand: fix NULL pointer dereference with no ECC engine When "nand-no-ecc-engine" is set in DT, nanddev_get_ecc_engine() takes the NAND_ECC_ENGINE_TYPE_NONE path and returns success while leaving nand->ecc.engine NULL. The SPI-NAND code nevertheless dereferences it unconditionally to test for a pipelined engine, so probing such a device oopses immediately. Rather than open-coding the test three times, add a nand_ecc_is_pipelined() helper to the NAND core that folds the NULL check into the integration comparison, and use it everywhere. Future callers then cannot reintroduce the problem.

Linux

In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix IRQ injection with SIGP Stop and Store Status When __inject_sigp_stop() is called for a Stop and Store Status operation, if the vCPU is running, the interrupt is marked as pending and the status is stored by the thread performing the KVM_RUN IOCTL. If the vCPU is already stopped, the status is stored immediately. Storing the status means writing into userspace, which might fault, and __inject_sigp_stop() is called from do_inject_vcpu() which in turn is always called holding a spinlock, which is obviously an issue. Fix this by returning -EWOULDBLOCK from __inject_sigp_stop(), and adding a bool flag to indicate whether a store status is needed. The callers of do_inject_vcpu() are modified to pass the pointer to the bool flag; whenever a Store Status operation is needed, the callers can now perform it outside the spinlock. Opportunistically refactor kvm_s390_set_irq_state() to use scoped_guard() and __free(). [ Added Fixes tag while picking -- Claudio ]

Linux

In the Linux kernel, the following vulnerability has been resolved: macsec: initialize SecY before registering the netdevice Creating a MACsec device with MAC offload over an LRO-capable lower device triggers a warning in rtmsg_ifinfo_build_skb() when IPv4 forwarding is enabled by default. register_netdevice() invokes inetdev_init(), which disables LRO and emits a NETDEV_FEAT_CHANGE notification. This reaches macsec_fill_info() before macsec_add_dev() initializes the SecY. key_len is still zero, so macsec_fill_info() returns -EMSGSIZE and trips the WARN_ON in rtmsg_ifinfo_build_skb(), even though the skb has enough space. Even without the warning, notifications during registration can report uninitialized SecY attributes, including the SCI. This ordering has existed since the driver was introduced. Initialize the SecY and apply the new-link attributes before registration. Move MAC address inheritance into macsec_newlink() so the SCI can also be initialized before registration-time notifications report it. Move the per-CPU statistics and metadata destination allocation into ndo_init(), and release partial allocations on failure.

Linux

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Derive GUEST_HAS_SVE from the SVE feature bit at EL2 pkvm_init_features_from_host() takes KVM_ARCH_FLAG_GUEST_HAS_SVE and KVM_ARM_VCPU_SVE from the host separately, but pkvm_vcpu_init_sve() tests the bit while vcpu_has_sve() reads the flag. A host that sets the flag without the bit gets a vCPU with a NULL sve_state that the world switch loads the guest's SVE state from. Derive the flag from the bit, and drop the protected path's copy of the host's flag, which is dead code since protected VMs are not allowed SVE.

Linux

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Fix life cycle of the nested_mmus array The nested_mmus array holds the shadow page tables that are used when a guest is running a nested context. These structures are allocated on VCPU_INIT for whole guest, which implies that they may have to be relocated as the array grows. Should a VCPU_INIT occur whilst a vcpu is actively running an L2 and that the allocation requires relocation, that vcpu will still be running with a pointer to the previous structure, which will have been freed. Fix this by turning the array of structures to an array of pointers, which is now allocated at VM creation, sized to the absolute maximum that KVM can handle. In turn, each VCPU_INIT contributes S2_MMU_PER_VCPU to the pool. No reallocation is ever performed, and the life cycle of each object is much clearer: - the nested_mmus array is allocated in kvm_init_nested(), and freed in kvm_arch_destroy_vm() - s2_mmu structures are allocated in kvm_vcpu_init_nested(), and freed on kvm_arch_flush_shadow_all() Finally, the freeing of vcpu->arch.vncr_array is made consistent rather than being done on some failure paths, but not others.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Remove sink usage from DPMS [Why] stream->sink is optional and can be null, so should always be checked before dereference. Additionally, most of its usage in DPMS sequences is for stream->sink->link, which can be replaced with stream->link, as the two should always be the same. [How] * Replace stream->sink->link in DPMS on/off * Add assert to USB4 BW allocation where sink is required * Avoid inconsistencies in resource access, e.g. don't repeat stream->link after it was already saved to a local variable * Pull out effective VPG calculation to helper getter * Formatting fixes

Linux

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix self-redirect copied_seq double-counting When a BPF stream_verdict program redirects an skb back to the same socket (self-redirect with BPF_F_INGRESS), sk_psock_verdict_apply() calls tcp_eat_skb() which advances tcp_sk->copied_seq. However, the skb is then delivered to the socket's psock ingress queue and later read by tcp_bpf_recvmsg_parser(), which also advances copied_seq via the copied_from_self accounting path. This double-counting causes copied_seq to advance by 2x the actual data length, triggering: TCP recvmsg seq # bug 2: copied BF2E806, seq BF2E7FD, \ rcvnxt BF2E806, fl 0 WARNING: net/ipv4/tcp.c:2745 at tcp_recvmsg_locked+0x72b/0x2640 Call Trace: tcp_recvmsg+0x10a/0x500 sock_recvmsg+0x168/0x1d0 __sys_recvfrom+0x19a/0x2a0 __x64_sys_recvfrom+0xe4/0x1f0 do_syscall_64+0xf7/0x530 entry_SYSCALL_64_after_hwframe+0x77/0x7f cleanup rbuf bug: copied BF2E806 seq BF2E806 rcvnxt BF2E806 WARNING: net/ipv4/tcp.c:1609 at tcp_cleanup_rbuf+0xf2/0x1c0 Call Trace: tcp_recvmsg_locked+0x8d1/0x2640 tcp_recvmsg+0x10a/0x500 sock_recvmsg+0x168/0x1d0 __sys_recvfrom+0x19a/0x2a0 __x64_sys_recvfrom+0xe4/0x1f0 do_syscall_64+0xf7/0x530 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by converting self-redirect verdict to __SK_PASS at the beginning of sk_psock_verdict_apply(). This bypasses the __SK_REDIRECT case entirely (which calls sk_psock_eat_skb), letting the __SK_PASS path queue the skb to the psock ingress queue. The data is then read via tcp_bpf_recvmsg_parser(), which advances copied_seq exactly once through copied_from_self. Cross-socket redirects continue through __SK_REDIRECT with sk_psock_eat_skb() unchanged.

Linux

In the Linux kernel, the following vulnerability has been resolved: fs: avoid repeated scans in evict_inodes() We observed hung tasks when users attempted to unmount a filesystem after its disk had been removed while still in use. During device removal, fs_bdev_mark_dead() calls evict_inodes() while holding s_umount. Each time evict_inodes() drops s_inode_list_lock to reschedule, it restarts the walk from the head of s_inodes. With many referenced inodes at the head of the list, these restarts repeatedly scan the same inodes without reclaiming them. This can keep s_umount held for a long time, blocking concurrent umount attempts and triggering hung-task reports. Keep the current inode, already marked I_FREEING, out of the disposal batch until s_inode_list_lock is reacquired. Resume the walk from this inode and dispose of it in a later batch or at the end of the walk. The zero-refcount and state checks under i_lock allow this walker to claim the inode by setting I_FREEING and removing it from the LRU. Other reclaimers skip the inode, leaving this walker responsible for eviction. Only evict() removes it from s_inodes, so keeping it out of the disposal batch ensures that it remains on the list while the lock is dropped. After reacquiring the lock, reading its current next pointer accounts for concurrent removal of following inodes. The existing inode lifetime rules prohibit acquiring a reference to an inode marked I_FREEING or I_WILL_FREE. __iget() requires its caller to hold i_lock and establish that taking a reference is valid. Inode lookup and igrab() check these flags under i_lock when acquiring a reference from zero. ihold() requires an existing reference, which would keep i_count nonzero and prevent this walker from claiming the inode. These rules already allow iput_final() and the inode shrinker to release i_lock after setting I_FREEING and before eviction completes. A temporary __iget() reference would also keep the inode on the list, but its release must preserve last-reference handling. Another user can acquire a reference, update lazy timestamps and drop its reference while the pin is held. If the pin becomes the last reference, dropping it with atomic_dec_and_test() and evicting directly bypasses iput()'s lazytime handling and can lose those timestamp updates. Releasing the pin with iput() preserves that handling, but does not guarantee eviction. fs_bdev_mark_dead() runs with SB_ACTIVE set, so iput() may retain the inode in cache, whereas evict_inodes() must evict eligible zero-reference inodes. The inode may also have been freed when iput() returns, so the walker cannot then use it to force eviction. Using I_FREEING preserves the existing eviction behavior without introducing an additional last-reference transition. The xfstests auto group passed on ext4 and XFS with known unrelated failures excluded. No new issues were observed, and the previously reproducible hung task no longer occurs with this patch.

Linux

In the Linux kernel, the following vulnerability has been resolved: arm64: io: Reject non-user protection in ioremap_prot() Mapping a stack-top page via /dev/mem with PROT_NONE and then reading that process's /proc/<pid>/cmdline triggers a spurious WARN in ioremap_prot() through generic_access_phys(): WARNING: ./arch/arm64/include/asm/io.h:275 at generic_access_phys Call trace: generic_access_phys+0x1c8/0x228 (P) __access_remote_vm+0x2b4/0x398 access_remote_vm+0x14/0x30 get_mm_cmdline+0xf8/0x2a0 proc_pid_cmdline_read+0x68/0x120 generic_access_phys() passes the protection derived from the user PTE to ioremap_prot(). On arm64, a PROT_NONE mapping is represented by a present-invalid PTE, so pte_present() still returns true and the protection reaches ioremap_prot(). A PROT_NONE mapping does not have PTE_USER, causing the existing WARN_ON_ONCE() in ioremap_prot() to fire even though this is a valid user mapping. Execute-only mappings have the same issue and must not be readable through this path either. ioremap_prot() should therefore reject protection values without PTE_USER without warning. This makes the access fail cleanly for PROT_NONE and execute-only mappings while retaining the existing user-protection contract.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: emac: move setting of netops to fix crash fixes the following crash on driver initialization: |BUG: Kernel NULL pointer dereference on read at 0x00000158 |Faulting instruction address: 0xc0566b40 |Oops: Kernel access of bad area, sig: 11 [#1] |BE PAGE_SIZE=4K PowerPC 44x Platform |Modules linked in: |CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: GW 7.3.0-rc3+ #1 |Tainted: [W]=WARN |Hardware name: MyBook Live APM821XX 0x12c41c83 PowerPC 44x Platform |NIP: c0566b40 LR: c05648f8 CTR: c04c1e9c |REGS: c1053a20 TRAP: 0300 Tainted: GW (7.3.0-rc3+) |MSR: 0002b000 <CE,EE,FP,ME> CR: 24008808 XER: 00000000 |DEAR: 00000158 ESR: 00000000 |GPR00: c05648f8 c1053b10 c1063600 c1030000 c5ab3000 00000000 [...] |GPR08: 00000002 00000000 00000000 c1053b40 84002808 00000000 [...] |GPR16: cfffd210 00000002 c0beafcc cfffc960 00000000 c1030644 [...] |GPR24: c0beafbc c1037000 00000000 0000000a 00000000 c1030000 [...] |NIP [c0566b40] phy_link_topo_add_phy+0x2c/0x1d0 |LR [c05648f8] phy_attach_direct+0x1a4/0x368 |Call Trace: |[c1053b10] [c0811e04] klist_put+0x54/0xb4 (unreliable) |[c1053b40] [c05648f8] phy_attach_direct+0x1a4/0x368 |[c1053b70] [c0564ae8] phy_connect_direct+0x2c/0x60 |[c1053b90] [c056c7a8] of_phy_connect+0x50/0x74 |[c1053bc0] [c0572a88] emac_probe+0xd50/0x119c |[c1053c90] [c04cb770] platform_probe+0x74/0xa4 |[c1053cb0] [c04c8f08] really_probe+0x120/0x2b0 |[c1053cd0] [c04c9254] __driver_probe_device+0x1bc/0x1fc |[c1053d00] [c04c9334] driver_probe_device+0x38/0xa8 |[c1053d30] [c04c9560] __driver_attach+0xf4/0x10c |[c1053d50] [c04c6af8] bus_for_each_dev+0x68/0xd0 |[c1053d90] [c04c7c34] bus_add_driver+0xcc/0x1ec |[c1053dc0] [c04c9f6c] driver_register+0xcc/0x110 |[c1053de0] [c0aa3f40] emac_init+0x1c4/0x200 This bug showed up starting with v7.3-rc1. At the NIP in phy_link_topo_add_phy() is a netdev_need_ops_lock() check. This was added by the following commit ded86da4bbb7 ("net: ethtool: relax ethnl_req_get_phydev() locking assertion") The bug shows up because at the time of_phy_connect() was called, the netdev_ops were *not yet* determined. My fix is to move the code that sets netdev_ops+commac.ops+ethtool_ops further up as emac_init_config() derives that by looking at the device-tree and sets the required dev->phy_mode accordingly. During review, the Sashiko bot's AI stated that the commac assignment became a dead store. Great catch! To keep the original behavior as-is, one mentioned option "set dev->commac.ops = &emac_commac_ops only in the non-gige case?" sounded like a great plan. So the dev->commac.ops assignment for the non-gige-case moves into the else block. This patch was tested on a WD MyBook Live (RGMII). the device now works again.

Linux

In the Linux kernel, the following vulnerability has been resolved: ovl: fix UAF in ovl_do_mkdir() debug print ovl_do_mkdir() prints the input dentry with %pd after vfs_mkdir(). Since commit fe497f0759e0 ("VFS: change vfs_mkdir() to unlock on failure."), vfs_mkdir() calls end_creating() on the input dentry on failure and may replace it on success, so the post-call %pd can use-after-free the dentry when CONFIG_OVERLAY_FS_DEBUG is enabled. Print the dentry before the call and only the result afterward.

Linux

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix missing alloc tagging of direct mempool allocations Commit 1d78d56c43ef ("netfs: Fix folio_queue ENOMEM in writeback by adding a mempool") added a mempool for the folio_queues and made the request, subrequest and folio_queue allocations distinguish between writeback and everything else. Writeback is part of memory reclaim and must not fail due to ENOMEM, so it allocates under GFP_NOFS through mempool_alloc(), which may dip into the pool's reserve and, if that runs empty, wait for elements to be returned. The GFP_KERNEL paths, which can return -ENOMEM to their callers, invoke the pool's ->alloc() callback directly instead. The direct call, however, skips the alloc_hooks() wrapper that the mempool_alloc() macro provides. The pool callbacks, mempool_alloc_slab() and mempool_kmalloc(), call kmem_cache_alloc_noprof() and kmalloc_noprof() and rely on current->alloc_tag having been set by the caller. With CONFIG_MEM_ALLOC_PROFILING_DEBUG=y this leads to current->alloc_tag not set WARNING: ./include/linux/alloc_tag.h:161 at __alloc_tagging_slab_alloc_hook alloc_tag was not set WARNING: ./include/linux/alloc_tag.h:166 at __alloc_tagging_slab_free_hook at allocation and free time respectively, as reported when reading files on a CIFS mount. The allocations are also missing from /proc/allocinfo. Wrap the direct ->alloc() invocations in alloc_hooks() with a new mempool_alloc_noreserve() helper in include/linux/mempool.h, next to the other alloc_hooks()-wrapped macros such as mempool_alloc(). The GFP_KERNEL paths keep their failable allocation semantics, they just get tagged now.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/xe: harden adjust_idledly() against divide-by-zero and overflow adjust_idledly() has several corner-case issues flagged during review: 1. If xe_gt_clock_init() failed to recognise the crystal clock, gt->info.timestamp_base is 0, which makes idledly_units_ps also 0. The subsequent DIV_ROUND_CLOSEST(..., idledly_units_ps) is then a divide-by-zero and panics the kernel. 2. The tick-to-ns conversions are done in u32: idledly * idledly_units_ps, (maxcnt - 1) * 1000 Both overflow u32 before DIV_ROUND_CLOSEST() sees them. 3. If IDLE_WAIT_TIME reads back as 0, maxcnt evaluates to 0 and the maxcnt - 1 clamp wraps to 0xFFFFFFFF in u32. 4. The register only stores whole ticks, so the clamped ns value has to be converted to ticks and back. DIV_ROUND_CLOSEST() can round that conversion up past maxcnt: maxcnt = 640 ns, one tick = 666664 ps clamp: maxcnt - 1 = 639 ns ns -> ticks: 639000 / 666664 = 0.958 -> rounds to 1 tick tick -> ns: 1 * 666664 / 1000 = 667 ns 667 ns is programmed into RING_IDLEDLY, but 667 >= maxcnt (640), so xe_gt_WARN_ON() fires again on every subsequent init. Return early if timestamp_base is 0 (the unknown-crystal path). Do the conversions in u64 via the *_ULL() helpers so they cannot wrap. Clamp with a floor (DIV_ROUND_DOWN_ULL) so the programmed delay stays strictly below maxcnt, and guard the maxcnt == 0 case with a zero delay while still writing RING_IDLEDLY so INHIBIT_SWITCH_UNTIL_PREEMPTED is cleared. v2: Drop the redundant warn on the timestamp_base == 0 path; xe_gt_clock_init() already warns on an unrecognised crystal clock. Keep the early return to avoid the divide-by-zero. - Vinay v3: Field-mask the RING_IDLEDLY write with REG_FIELD_PREP(IDLE_DELAY, ...) instead of writing the raw tick count, which could clobber INHIBIT_SWITCH_UNTIL_PREEMPTED and reserved bits. Split the inhibit-switch clear from the maxcnt clamp so a set inhibit bit no longer forces a needless delay overwrite when the delay itself is already valid. Use gt_to_xe(gt) instead of gt_to_xe(hwe->gt). (cherry picked from commit d864065ea25e9d12897c175de9176ce46677e176)

Linux

In the Linux kernel, the following vulnerability has been resolved: mm/damon/ops-common: use a page-aligned address in damon_ptep_mkold() __damon_va_prepare_access_check() picks a random byte address within the region and stores it in r->sampling_addr. damon_va_mkold() passes it into a page table walk, which hands it to damon_ptep_mkold() as the address of the page to sample: damon_va_mkold(mm, r->sampling_addr) damon_va_walk_page_range(mm, addr, addr + 1) damon_mkold_pmd_entry() damon_ptep_mkold(pte, vma, addr) ptep_test_and_clear_young(vma, addr, pte) mmu_notifier_clear_young(mm, addr, addr + PAGE_SIZE) For arm64, before commit 6f0e1142173a ("arm64: mm: support batch clearing of the young flag for large folios"), the contpte helper walked exactly CONT_PTES entries from the aligned-down page table pointer and used @addr only to pass down to each entry, so an unaligned value was harmless: ptep = contpte_align_down(ptep); addr = ALIGN_DOWN(addr, CONT_PTE_SIZE); for (i = 0; i < CONT_PTES; i++, ptep++, addr += PAGE_SIZE) Now the range to walk is derived from @addr instead: end = addr + nr * PAGE_SIZE, rounded up to CONT_PTE_SIZE. For a sample in the last page of a contpte block, the sub-page offset puts end just past the block boundary, so the round-up lands a whole block further and the walk clears PTE_AF in CONT_PTES entries beyond the sampled block. For the last block in a page table page, those entries are past the end of that page, so the walk writes into the page that follows. Triggered by the full 7.1/7.2 kernel selftest suite on arm64 (EC2 c/m6g.4xlarge). The kernel sometimes crashes at or shortly after the DAMON test. What the overrun does depends on the page that happens to follow the page table, so there is no single signature. If that page is read-only, the write faults in the sampling path itself: Unable to handle kernel write to read-only memory at virtual address ffff0003c5d2d000 FSC = 0x0f: level 3 permission fault CM = 0, WnR = 1, TnD = 0, TagAccess = 0 CPU: 10 UID: 0 PID: 3487 Comm: kdamond.2 pc : contpte_test_and_clear_young_ptes+0x70/0xc0 lr : damon_ptep_mkold+0x1e8/0x1f8 Call trace: contpte_test_and_clear_young_ptes+0x70/0xc0 (P) damon_mkold_pmd_entry+0x150/0x170 walk_pmd_range+0x110/0x2b0 walk_pud_range+0x10c/0x208 walk_pgd_range+0x134/0x258 __walk_page_range+0x98/0x1b0 walk_page_range_vma_unsafe+0x90/0x148 walk_page_range_vma+0x28/0x40 damon_va_walk_page_range+0x114/0x2b8 damon_va_prepare_access_checks+0xec/0x1a8 kdamond_fn+0x534/0x770 kthread+0x128/0x138 ret_from_fork+0x10/0x20 Otherwise the page is writable, the PTE_AF clearing succeeds silently and the damage only surfaces later, in whatever happened to own the page, so the backtrace is unrelated to DAMON and differs between runs. Pass a page-aligned address to the ptep_test_and_clear_young() call in damon_ptep_mkold(), which is the only place DAMON can reach contpte_test_and_clear_young_ptes() from. Nothing else sees the aligned address, and r->sampling_addr itself is left as is, so the sampling and region bookkeeping semantics are unchanged.

Linux

In the Linux kernel, the following vulnerability has been resolved: parisc: Increase kernel stack size to 32kb For 64-bit Linux kernels, increase the default kernel stack size (THREAD_SIZE_ORDER) to 32 kB, in order to avoid kernel crashes which have been triggered recently when building the debian vtk9 package with gcc 17: stackcheck: kworker/u128:0 will most likely overflow kernel stack (sp:179a83af0, stk bottom-top:179a80000-179a84000) Kernel panic - not syncing: low stack detected by irq handler - check messages CPU: 2 UID: 0 PID: 30760 Comm: kworker/u128:0 Tainted: G W 6.18.46-dirty #1 NONE Tainted: [W]=WARN Hardware name: 9000/800/rp3440 Workqueue: writeback wb_workfn (flush-259:0) Backtrace: [<000000004022f050>] show_stack+0x70/0x90 [<000000004022378c>] dump_stack_lvl+0x124/0x190 [<000000004022382c>] dump_stack+0x34/0x48 [<000000004020212c>] vpanic+0x204/0x648 [<00000000402025c4>] panic+0x54/0x58 [<0000000040232230>] do_cpu_irq_mask+0x3f8/0x440 [<0000000040227070>] intr_return+0x0/0xc

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: check link is beaconing for color change When trying to do a color change, validate that the link is beaconing first, to avoid calling the driver with an invalid link.

Linux

In the Linux kernel, the following vulnerability has been resolved: media: video-i2c: use vb2_video_unregister_device on driver removal The driver uses vb2_fop_release() as its file release operation, so vb2_video_unregister_device() should be used instead of video_unregister_device() during driver removal. This ensures that the vb2 queue is properly disconnected before the video device is unregistered.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: cap ATOM command table nesting depth Cap nesting at 32 levels with execute_depth and return -ELOOP when exceeded.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: thunderx: fix PTP device ref leak in nicvf_probe() cavium_ptp_get() acquires a reference to the PTP PCI device through pci_get_device(). If any initialization step fails after cavium_ptp_get(), the PTP PCI device reference is leaked. Add a common error path to release the PTP reference before returning from probe failures.

Linux

In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: oss: Reject reads that cannot fit the next event snd_seq_oss_read() checks whether the next queued OSS sequencer event fits in the remaining userspace buffer before removing it from the read queue. The check is inverted. It currently stops when the event is smaller than the remaining buffer, so a normal 4-byte event is not copied for an 8-byte read buffer. Conversely, an 8-byte event can be copied for a smaller read count. Break only when the remaining userspace buffer is smaller than the next event, and report -EINVAL if no complete event has been copied. This prevents an undersized read from looking like end-of-file while leaving the event queued for a later read with a large enough buffer.

Linux

In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: fix the error path in dpaa2_switch_rx() In case of an error in dpaa2_switch_rx(), the dpaa2_switch_free_fd() function is called in order to free the FD. This is incorrect since the dpaa2_switch_free_fd() is intended to be used on Tx frame descriptors, meaning that it expects in the software annotation area of the FD data to find a valid skb pointer on which to call dev_kfree_skb(). Fix this by extracting the dma_unmap_page() from dpaa2_switch_build_linear_skb() directly into the dpaa2_switch_rx() function. This allows us to directly use free_pages() in case of an error before an SKB was created and kfree_skb() afterwards.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Unwind debug trap enable on copy_to_user failure If kfd_dbg_trap_enable() fails while copying runtime_info to userspace, it had already activated the trap, set debug_trap_enabled, taken an extra process reference, and opened the debug event file. Return -EFAULT without unwinding that state, leaving inconsistent trap state and a refcount imbalance that could break later DISABLE/ENABLE. On copy_to_user failure, deactivate the trap and undo the rest of the enable setup before returning.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: cpsw_new: unregister devlink on port registration failure cpsw_probe() registers devlink before registering the CPSW ports. If cpsw_register_ports() fails, the error path only unregisters the notifiers and then releases the lower level resources. It does not undo the successful cpsw_register_devlink() call, leaving the devlink instance and its parameters registered after probe has failed. Add a devlink cleanup label for the path where devlink registration has already succeeded, and use it when port registration fails.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: microchip: sparx5: clean up PSFP resources on flower setup failure sparx5_tc_flower_psfp_setup() allocates PSFP stream gate, flow meter and stream filter resources before adding VCAP actions. If a later step fails, the resources allocated earlier in the function are not unwound. Add error paths to release the stream filter, flow meter and stream gate when setup fails after they have been acquired. Also make sparx5_psfp_fm_add() return the acquired flow-meter id before the existing-flow-meter early return. When an existing flow meter is reused, sparx5_psfp_fm_get() increments its pool reference count, but the caller previously kept psfp_fmid as 0. If a later setup step failed, the error path could try to delete flow-meter id 0 instead of the reused flow meter, leaving the incremented reference behind.

Linux

In the Linux kernel, the following vulnerability has been resolved: btrfs: protect sb_write_pointer() with invalidate lock sb_write_pointer() reads the super block from the block device page cache using read_cache_page_gfp(). This has the same race with BLKBSZSET as the one fixed by commit 3f29d661e568 ("btrfs: sync read disk super and set block size"). Take the mapping invalidate lock around read_cache_page_gfp() to serialize the read against block size changes.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: lan966x: restore RX state on reload failure lan966x_fdma_reload() backs up rx->page_pool and rx->fdma before reallocating the RX resources for the new MTU. If the allocation fails, the restore path puts these fields back before restarting RX. However, the reload path also updates rx->page_order and rx->max_mtu before calling lan966x_fdma_rx_alloc(). These fields are not restored on failure, so RX can be restarted with the old pages, old FDMA state and old page pool, but with the page geometry from the failed new MTU. This can make the XDP path advertise a frame size derived from the new page_order while the actual RX pages still come from the old allocation. For example, after a failed reload to a jumbo MTU, xdp_init_buff() may be called with a frame size larger than the restored RX pages. lan966x_fdma_rx_alloc_page_pool() also registers the newly allocated page pool with each port's XDP RXQ before fdma_alloc_coherent() is called. If fdma_alloc_coherent() fails, the new page pool is destroyed, but the rollback path does not restore the per-port XDP RXQ mem model registration either. Save and restore rx->page_order and rx->max_mtu, and restore the old page pool registration for each port's XDP RXQ before RX is started again. This keeps the restored RX state consistent after a failed reload.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Properly acquire queue buffers in CRIU restore When kfd_queue_acquire_buffers() was split off from set_queue_properties_from_user(), set_queue_properties_from_criu() was missed. Thus, set_queue_properties_from_criu() is not filling out the buffer fields of queue_properties, which can come up when subsequent code expects them to be non-null. Add the proper call to kfd_queue_acquire_buffers(), and also use the right cast types in set_queue_properties_from_criu() (which were missed at the same time) (cherry picked from commit 88ed96abbbe27b70193544fbc1ee06448c274714)

Linux

In the Linux kernel, the following vulnerability has been resolved: mailbox: imx: Use devm_pm_runtime_enable() sashiko complained about early usage of the device while probe isn't completed. This can be mitigated by delaying the pm_runtime_enable() into the removal path instead doing it early. This ensures that in an error case the device is removed (and imx_mu_shutdown()) before pm_runtime_disable() so we don't have to do this manually. For the order to work, lets move devm_mbox_controller_register() until after the pm-runtime part. So the reverse order will be mbox-controller removal followed by disabling pm runtime. Use devm_pm_runtime_enable(), remove manual pm_runtime_disable() invocations and move the pm_runtime handling in probe before devm_mbox_controller_register().

Linux

In the Linux kernel, the following vulnerability has been resolved: mailbox: imx: Add a channel shutdown field sashiko complained about possible teardown problem. The scenario CPU 0 CPU 1 imx_mu_isr() imx_mu_shutdown() imx_mu_xcr_rmw(priv, IMX_MU_RCR, 0, IMX_MU_xCR_RIEn(priv->dcfg->type, cp->idx)); imx_mu_specific_rx() imx_mu_xcr_rmw(priv, IMX_MU_RCR, IMX_MU_xCR_RIEn(priv->dcfg->type, 0), 0); free_irq() The RX event remains enabled because in this short window the RX event was disabled in ->shutdown() while the interrupt was active and then enabled again by the ISR while ->shutdown waited in free_irq(). This race requires timing and if happens can be problematic on shared handlers if the "removed" channel triggers an interrupt. In this case the irq-core will shutdown the interrupt with the "nobody cared" message. Introduce imx_mu_con_priv::shutdown to signal that the channel is shutting down. This flag is set with the lock held (by imx_mu_xcr_clr_shut()). The unmask side uses imx_mu_xcr_set_act() which only enables the event if the channel has not been shutdown and serialises on the same lock.

Linux

In the Linux kernel, the following vulnerability has been resolved: md/raid5: let stripe batch bm_seq comparison wrap-safe Once the 32-bit seq wraps, a newer bm_seq can look smaller than old, so .. covert to wrap-safe calculate way.

Linux

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix lease break and ack state handling Do not skip valid lease states containing WRITE_CACHING when breaking level-II/read leases for writes and truncates. Handle lease break acknowledgments according to the SMB2 rule that the acknowledged state must be a subset of the server's break target. Apply the acknowledged state directly and keep the break pending on failed ACKs.

Linux

In the Linux kernel, the following vulnerability has been resolved: xen/gntalloc: validate grant count before allocation gntalloc_ioctl_alloc() allocates the grant-id array before checking whether the requested count fits within the global grant limit. Counts above that limit cannot succeed, so reject them before the user-controlled allocation reaches kcalloc(). Use a subtraction-based check while holding gref_mutex so adding the requested count cannot wrap. Also cast the count before advancing the per-file index so the page-size multiplication is performed in 64-bit arithmetic.

Linux

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: mark the rcu locked areas properly When we bump the uref counter, there's no need to keep the rcu lock because the referred hash table can't disappear. Also, from the same reason in mtype_gc we need the rcu lock and not a spinlock.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm/si: Don't schedule thermal work when queue isn't initialized When DPM is turned off with the amdgpu.dpm=0 module parameter, the thermal work queue isn't initialized so we shouldn't schedule any work on it. (cherry picked from commit bd018d36171a695952c6d391471c279c9e05c8b2)

Linux

In the Linux kernel, the following vulnerability has been resolved: ksmbd: don't hold ci->m_lock while waiting for a lease break ack When a cifs.ko client caches a read-handle (RH) lease via deferred close and a conflicting open arrives, ksmbd breaks the lease and waits for the acknowledgment in wait_for_break_ack() for up to OPLOCK_WAIT_TIME (35s). __smb_break_all_levII_oplock() runs that wait while holding ci->m_lock for read. cifs.ko reacts to a handle-lease break by closing the deferred handle rather than sending a lease break acknowledgment. That close path (close_id_del_oplock() -> opinfo_del()) takes ci->m_lock for write and is exactly what would wake the waiter, but it blocks on the read lock held by the waiting thread. The break is then resolved only by the 35s timeout, so xfstests generic/001 takes ~78s with leases enabled versus ~4s with oplocks only. Collect the target opinfos (each pinned with a reference) while holding ci->m_lock, then break them after releasing it, matching how smb_grant_oplock() already breaks a conflicting lease using only a reference. The reference keeps the opinfo (and its conn and lease) alive across the unlocked window, and a close racing the break is handled by the existing OPLOCK_CLOSING state check. Apply the same fix to the parent lease break paths.

Linux

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Keep the domain reference while processing hotplug We process hotplug events in a workqueue that may run after the domain has been removed by tb_domain_remove(). For example if user unloads the driver while at the same time plugging a device router we may have scheduled tb_handle_hotplug() to run. Avoid possible UAF in this case by taking the domain reference before scheduling the hotplug handler in tb_queue_hotplug().

Linux

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, Handle destroying table that has a miss table If a table has a miss table that was created by 'mlx5hws_table_set_default_miss' API function, its miss_tbl keeps the table that points to it in a list. If such table is deleted, we need to also remove it from the miss_tbl list, otherwise the node in miss_tbl list will contain garbage.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amd/ras: reset CPER ring on corrupt entry size When CPER ring overflow handling advances the read pointer, it trusts the parsed entry size from the current ring contents. Corrupt CPER data can produce an entry size that does not advance rptr after dword conversion and pointer masking. In that case the recovery loop keeps testing the same location while holding the CPER ring mutex. This can hang the worker that is writing the next CPER record. Detect a no-progress rptr update and reset the CPER ring to an empty state instead. This drops the corrupt contents and lets the writer leave the recovery path without spinning.

Linux

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Validate SENSOR_UPDATE payload size SENSOR_UPDATE carries one or more sensor readings after the fixed notification header. The parser derives the expected reading count from the sensor description, but it did not verify that the received payload contains those entries before parsing them. Reject truncated update notifications before reading the variable array.

Linux

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Validate BASE_ERROR_EVENT payload size BASE_ERROR_EVENT carries a variable number of message reports, with the count encoded in error_status. The notification parser used that count without checking whether the received payload contained all reported entries. Reject truncated payloads before copying the report array.

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate deauth frame length before reason access ieee80211_rx_mgmt_deauth() reads the deauth reason code before checking that the fixed field is actually present in the received frame. Validate the deauth frame length first and only then read the reason code.

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: reject short monitor TX frames In monitor mode, lbs_hard_start_xmit() casts skb->data to a radiotap TX header, skips that header, and then copies the 802.11 destination address from offset 4 in the remaining frame. The generic length check only rejects zero-length and oversized skbs, so a short monitor frame can be read past the end of the skb data. Require enough bytes for the radiotap TX header and the destination address field before using the monitor-mode header layout.

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix sched scan IE sizing Scheduled scan built the probe request before iwl_mvm_scan_fits(), so oversized IEs could be copied into the fixed preq buffer before length validation. Move iwl_mvm_build_scan_probe() after the fits check. Also advertise max_sched_scan_ie_len using iwl_mvm_max_scan_ie_len() so userspace limits account for driver-inserted DS/TPC bytes.

Linux

In the Linux kernel, the following vulnerability has been resolved: arm64: kprobes: Allow reentering kprobes while single-stepping A kprobe can be hit while another kprobe is in KPROBE_HIT_SS state. This can happen when tracing or perf code runs from the debug exception path while the first kprobe is preparing or executing its out-of-line single-step instruction. Currently arm64 treats a kprobe hit in KPROBE_HIT_SS as unrecoverable, the same as a hit in KPROBE_REENTER. This is too strict. A hit in KPROBE_HIT_SS is still a one-level reentry and can be handled by saving the current kprobe state and setting up single-step for the new probe, just like reentry from KPROBE_HIT_ACTIVE or KPROBE_HIT_SSDONE. The truly unrecoverable case is hitting another kprobe while already in KPROBE_REENTER, because the reentry save area has already been consumed. Move KPROBE_HIT_SS to the recoverable reentry cases and leave KPROBE_REENTER as the unrecoverable nested reentry case. This change also requires saving saved_irqflag in struct prev_kprobe. When a nested kprobe calls kprobes_save_local_irqflag(), it overwrites kcb->saved_irqflag with the currently masked DAIF value, losing the outer kprobe's original DAIF state. Without this fix, when the outer kprobe's single-step finishes, kprobes_restore_local_irqflag() applies the wrong DAIF mask and leaves interrupts permanently disabled. Extend struct prev_kprobe with a saved_irqflag field and save/restore it alongside kp and status. This ensures the outer kprobe's original interrupt state is preserved across reentry. This mirrors the x86 fix in commit 6a5022a56ac3 ("kprobes/x86: Allow to handle reentered kprobe on single-stepping").

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: reject undersized HWSIM_ATTR_TX_INFO hwsim_tx_info_frame_received_nl() casts the HWSIM_ATTR_TX_INFO payload to a struct hwsim_tx_rate * and unconditionally reads IEEE80211_TX_MAX_RATES entries (8 bytes) from it. The policy only bounds the attribute from above (NLA_BINARY .len is a maximum) and the op sets GENL_DONT_VALIDATE_STRICT, so a short or zero-length attribute is accepted and the loop reads past the payload. Require the exact length in the policy, so a malformed attribute is rejected before the handler runs.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/gma500: return errors from Oaktrail HDMI I2C reads xfer_read() waits for the HDMI I2C transaction to reach I2C_TRANSACTION_DONE, but it ignores both timeout and signal returns from wait_for_completion_interruptible_timeout(). If the interrupt never advances the transaction state, the loop can wait forever. Return -ETIMEDOUT when the completion wait expires, propagate interrupted waits, and make the I2C master_xfer callback return the first transfer error instead of reporting a successful message count.

Linux

In the Linux kernel, the following vulnerability has been resolved: ima: return error early if file xattr cannot be changed During early boot, the filesystem is read-only and any changes to xattrs are not allowed. This fails in case of ext4 because changing xattr starts an ext4 transaction which fails with the following warning. WARNING: fs/ext4/ext4_jbd2.c:75 at ext4_journal_check_start+0x63/0xa0 [ext4], CPU#1: systemd-sysroot/561 CPU: 1 UID: 0 PID: 561 Comm: systemd-sysroot Not tainted 6.19.12-1-default #1 PREEMPT(voluntary) openSUSE Tumbleweed c2dfc3c9d9f6f1233251c5d4410574fe82a348ee Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:ext4_journal_check_start+0x63/0xa0 [ext4] Call Trace: __ext4_journal_start_sb+0x3e/0x180 [ext4 6d025f3bc52c89a957b89a89d211fadf5e9434e1] ext4_xattr_set+0x104/0x150 [ext4 6d025f3bc52c89a957b89a89d211fadf5e9434e1] __vfs_setxattr+0x9a/0xd0 __vfs_setxattr_noperm+0x76/0x1f0 ima_appraise_measurement+0x23e/0xe40 ima_d_path+0x5a/0xd0 process_measurement+0xb29/0xc40 ? copy_from_kernel_nofault+0x21/0xe0 ? fscrypt_file_open+0xc0/0xe0 ? ext4_file_open+0x60/0x490 [ext4 6d025f3bc52c89a957b89a89d211fadf5e9434e1] ? bpf_prog_31efb7c56239148b_restrict_filesystems+0xab/0x126 ? __bpf_prog_exit+0x23/0xd0 ? __bpf_tramp_exit+0xd/0x50 ? bpf_trampoline_6442530367+0x9f/0xea ima_file_check+0x57/0x80 security_file_post_open+0x50/0xf0 path_openat+0x493/0x1650 do_filp_open+0xc7/0x170 Detect the state of the file early and return the error.

Linux

In the Linux kernel, the following vulnerability has been resolved: mmc: core: Add validation for host-provided max_segs The max_segs field is of type unsigned short, and if a host driver sets an excessively large value, it may be truncated to zero. This can cause mmc_alloc_sg() to call kmalloc_objs() with a zero size allocation request, which leads to undefined behavior. Under the SLUB allocator, kmalloc(0) returns a special pointer (ZERO_SIZE_PTR). The subsequent 'if (sg)' check will evaluate to true, and sg_init_table() will then attempt to access invalid memory, resulting in a crash: dwmmc_rockchip 2a310000.mmc: Successfully tuned phase to 133 mmc1: new UHS-I speed SDR104 SDHC card at address aaaa Unable to handle kernel paging request at virtual address 0000001ffffffff0 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000102c88000 [0000001ffffffff0] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 2 UID: 0 PID: 102 Comm: kworker/2:1 Not tainted 7.0.0-rc6-next-20260331-00013-g4d93c25963c5-dirty #80 PREEMPT Hardware name: Rockchip RK3576 EVB V10 Board (DT) Workqueue: events_freezable mmc_rescan pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : sg_init_table+0x2c/0x50 lr : sg_init_table+0x24/0x50 sp : ffff8000837db710 x29: ffff8000837db710 x28: 000000000000c000 x27: 0000000000000300 x26: 0000000000000000 x25: 0000000000000040 x24: ffff0000c46a0000 x23: 0000000000000000 x22: ffff0000c0c73c00 x21: 0000000000000010 x20: 0000000000000010 x19: 0000000000000000 x18: 000000000000002c x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000000 x14: 0000000000000400 x13: ffff8000837dc000 x12: 0000000000000000 x11: ffff0000c0c73ca0 x10: 0000000000000040 x9 : 459ec1f0abbdbb00 x8 : 0000001fffffffe0 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000035579 x4 : 0000000000000901 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000010 Call trace: sg_init_table+0x2c/0x50 (P) mmc_mq_init_request+0x64/0x90 blk_mq_alloc_map_and_rqs+0x3ac/0x480 blk_mq_alloc_set_map_and_rqs+0x98/0x1e0 blk_mq_alloc_tag_set+0x1c0/0x290 mmc_init_queue+0x120/0x370 mmc_blk_alloc_req+0x150/0x420 To prevent this, add a validation check in mmc_mq_init_request() to detect when sg_len (derived from max_segs) is zero. If sg_len is zero, we return an error and print an error message, allowing host driver developers to identify and fix incorrect max_segs configuration. This is a defensive measure that ensures the MMC core fails gracefully when host drivers provide invalid max_segs values, rather than crashing with a page fault.

Linux

In the Linux kernel, the following vulnerability has been resolved: serial: 8250_port: recognize UPIO_AU My MIPS Alchemy systems generate the following warning during probe of the 8250 driver: WARNING: drivers/tty/serial/8250/8250_port.c:462 at set_io_from_upio+0xfc/0x124, CPU#0: swapper/0/1 Unsupported UART type 4 [...] [<80521d40>] set_io_from_upio+0xfc/0x124 [<80521dfc>] serial8250_set_defaults+0x94/0xe0 [<80520fb4>] serial8250_register_8250_port+0x288/0x51c [<805214ec>] serial8250_probe+0x160/0x1e8 [<8053b5f0>] platform_probe+0x64/0x90 The least invasive fix is to recognize UPIO_AU (type 4) in set_io_from_upio() and do nothing, since all parameters have already been set up in 8250_rt288x.c::au_platform_setup(). Run-tested on Alchemy Au1300 platform.

Linux

In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Add range checks for dec_output_info If the driver's dec_output_info contains invalid data the driver can write in invalid memory. Add a range check for that. This fixes this smatch error: drivers/media/platform/chips-media/wave5/wave5-vpuapi.c:588 wave5_vpu_dec_get_output_info() error: buffer overflow 'inst->frame_buf' 64 <= 127

Linux

In the Linux kernel, the following vulnerability has been resolved: net: bridge: remove stale rcu_barrier() in br_multicast_dev_del() This rcu_barrier() came from a time call_rcu() calls were used in net/bridge/br_multicast.c. Now kfree_rcu() is there, we can remove this problematic rcu_barrier() which causes extreme RTNL pressure in many syzbot reports. INFO: task syz-executor:77945 is blocked on a mutex likely owned by task kworker/u1024:5:36537. task:kworker/u1024:5 state:D stack:24616 pid:36537 tgid:36537 ppid:2 task_flags:0x4208060 flags:0x00080000 last_sleep:612797637337 Workqueue: netns cleanup_net Call Trace: <TASK> [<ffffffff81914eaa>] context_switch+0xf2a/0x1730 kernel/sched/core.c:6483 [<ffffffff81201143>] __schedule+0x1133/0x43a0 kernel/sched/core.c:8411 [<ffffffff8120446b>] __schedule_loop kernel/sched/core.c:8514 [inline] [<ffffffff8120446b>] schedule+0xab/0x260 kernel/sched/core.c:8529 [<ffffffff8121a093>] schedule_timeout+0xc3/0x2b0 kernel/time/sleep_timeout.c:75 [<ffffffff81205347>] do_wait_for_common kernel/sched/completion.c:100 [inline] [<ffffffff81205347>] __wait_for_common kernel/sched/completion.c:121 [inline] [<ffffffff81205347>] wait_for_common kernel/sched/completion.c:132 [inline] [<ffffffff81205347>] wait_for_completion+0x2c7/0x5d0 kernel/sched/completion.c:153 [<ffffffff81b8f27f>] rcu_barrier+0x49f/0x620 kernel/rcu/tree.c:3888 [<ffffffff860091b3>] br_multicast_dev_del+0x303/0x350 net/bridge/br_multicast.c:4459 [<ffffffff85fb5dbc>] br_dev_uninit+0x1c/0x40 net/bridge/br_device.c:157 [<ffffffff8568058c>] unregister_netdevice_many_notify+0x1c1c/0x2300 net/core/dev.c:12599 [<ffffffff8562be43>] ops_exit_rtnl_list net/core/net_namespace.c:187 [inline] [<ffffffff8562be43>] ops_undo_list+0x3d3/0x940 net/core/net_namespace.c:248

Linux

In the Linux kernel, the following vulnerability has been resolved: ntfs3: handle set_blocksize failures ntfs3 uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting we will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call.

Linux

In the Linux kernel, the following vulnerability has been resolved: isofs: handle set_blocksize failures isofs uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting we will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call.

Linux

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Immediately exec priority drop following activate With GICv5 an interrupt of equal or lower priority cannot be signalled until there has been a priority drop. This is done via the GIC CDEOI system instruction. Once this has been executed, the hardware is able to signal the next interrupt if there is one. As all interrupts are programmed to have the same priority, no new interrupts can be signalled until the priority drop has happened. This can cause issues when, for example, an interrupt remains active while a long running process takes place, such as when injecting a physical interrupt into a guest VM in software. The GICv5 driver has so far done the priority drop as part of irq_eoi(), i.e., at the same time as deactivating the interrupt. This means that any long running process (or VM) could block incoming interrupts, effectively causing a denial of service for all other interrupts. Rather than doing the EOI as part of irq_eoi() (which the name would suggest would be a good place for it), move it to happen immediately after acknowledging an interrupt in the main GICv5 interrupt handler. The deactivation of interrupts (GIC CDDI) remains implemented as part of irq_eoi(), which means that the same interrupt cannot be signalled a second time until deactivated by software.

Linux

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v4: Don't advertise VLPIs if no ITS is probed When accidentally setting “kvm-arm.vgic_v4_enable=1” on a system that has no MSI controller device tree node and GICv4, it results a panic as “gic_domain” is NULL and the kernel attempts to access it. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 Mem abort info: ESR = 0x0000000096000006 CPU: 1 UID: 0 PID: 295 Comm: lkvm-static Not tainted 7.1.0-rc4-ge3f15ad3970e #5 PREEMPT Hardware name: linux,dummy-virt (DT) pstate: 81402005 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : __irq_domain_instantiate+0x1d4/0x578 lr : __irq_domain_instantiate+0x1cc/0x578 Set vLPI support to false at init time if the host has no ITS, so it propagates properly to kvm_vgic_global_state.has_gicv4.

Linux

In the Linux kernel, the following vulnerability has been resolved: host1x: bus: Fix missing ops null check in error teardown In host1x_device_init(), the error teardown paths do not check client->ops before dereferencing it, unlike the forward init paths which correctly guard with 'client->ops &&'. This can result in a NULL pointer dereference if client->ops is NULL. Fix by adding the missing client->ops check in both the teardown and teardown_late labels.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/gsp: add SEC2 to GA100 chip table The booter-load and booter-unload firmware run on the SEC2 falcon. During tu102_gsp_oneinit(), the booter constructor needs device->sec2 to access the SEC2 falcon. Without the .sec2 entry, device->sec2 is NULL and this dereference crashes during GSP-RM boot.

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: don't WARN on WoWLAN suspend w/o netdetect Clearly, from a user perspective, it must be valid to configure WoWLAN and then suspend while not connected to a network. Since mac80211 doesn't distinguish these cases and simply calls the driver to suspend whenever WoWLAN is configured, the driver has to cleanly handle the case where it's called for WoWLAN, it's not connected but there's also no netdetect configured. Remove the WARN_ON() and keep returning 1 to disconnect and then suspend.

Linux

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: zero at allocation time There are occasional LLM hints wrt. leaking uninitialized data to userspace via ctnetlink. Just zero at allocation time, expectations are not frequently used these days. Intentionally keeps _init as-is because we could theoretically support re-init, so add the missing exp->dir there.

Linux

In the Linux kernel, the following vulnerability has been resolved: freevxfs: don't BUG() on unknown typed-extent type vxfs_bmap_typed() handles four typed-extent types and calls BUG() in its default case, so an on-disk typed extent with any other type value crashes the kernel. It is reachable from ioctl(FIBMAP) on a regular file: kernel BUG at fs/freevxfs/vxfs_bmap.c:230! RIP: vxfs_bmap_typed fs/freevxfs/vxfs_bmap.c:230 [inline] vxfs_bmap1+0x128a/0x12d0 fs/freevxfs/vxfs_bmap.c:257 Replace the BUG() with WARN_ON_ONCE() and return 0 -- the value vxfs_bmap_typed() already returns on failure (and from the DEV4 case above); vxfs_getblk() maps 0 to -EIO, so the ioctl fails cleanly.

Linux

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix possible deadlock in SEV init failure path __sev_platform_init_handle_init_ex_path() calls rmp_mark_pages_firmware() with locked=false while the parent function of init_ex_path already acquired the sev_cmd_mutex. In the case of an RMPUPDATE failure for any page after the first, the cleanup path would invoke reclaim pages which would result in a deadlock in sev_do_cmd. Pass locked=true to honor the lock status of the parent function.

Linux

In the Linux kernel, the following vulnerability has been resolved: ksmbd: remove stale channels from all sessions on teardown ksmbd_sessions_deregister() removes a connection's channels from other sessions' channel lists only while conn->binding is still set: if (conn->binding) { hash_for_each_safe(sessions_table, ...) ksmbd_chann_del(conn, sess); } conn->binding is a transient flag: it is cleared once a binding SESSION_SETUP completes, and also by a subsequent non-binding SESSION_SETUP on the same connection (a reauthentication on a bound channel, or a new SessionId==0 setup). A connection that has bound a channel into another session's ksmbd_chann_list and then clears conn->binding leaves that channel behind when it disconnects: the channel, whose chann->conn points at the now freed struct ksmbd_conn, stays on the owner session's list. When the owning connection later tears down, the second loop dereferences the stale channel: xa_for_each(&sess->ksmbd_chann_list, chann_id, chann) if (chann->conn != conn) ksmbd_conn_set_exiting(chann->conn); /* freed */ which is a use-after-free write into the freed ksmbd_conn (the same stale channel is also walked by show_proc_session() through /proc). The session is leaked as well, because its channel list never empties. Remove the conn->binding gate so a connection always removes its channels from every session on teardown.