Veille CVE

Mercredi 21 octobre 2026

10 CVE

Critique 0 Élevée 6 Moyenne 2 Faible 0 Non évaluée 2 Exploitées (KEV) Tri : plus récentes « kernel » ✕
  1. CVE-2026-114406 6.8 Moyenne

    Red Hat Hardened Images · Red Hat Assisted Installer for Red Hat OpenShift Container Platform 2 · Red Hat cert-manager Operator for Red Hat OpenShift · Red Hat Confidential Compute Attestation

    The system certificate authority (CA) store in Red Hat products, distributed via ca-certificates RPM packages, included multiple root CA certificates of authorities, which signed intermediate CA certificates with weak private keys issued by the eMudhra certificate authority. A man-in-the-middle attacker could use this flaw to issue certificates for arbitrary host names signed by the weak intermediate CA certificates, which would be considered trusted by a TLS/SSL client using system CA store and cause such clients to connect to malicious sites. Due to inability to only distrust specific intermediate certificates in all clients using the system CA store, root CA certificates of authorities that signed weak intermediate CA certificates are being removed.

  2. CVE-2026-114135 8.8 Élevée

    jupyter-server jupyter_server

    Jupyter Server is the backend for Jupyter web applications. From 2.0.0 until 2.6.0, enabling GatewayClient.url replaced the normal KernelWebsocketHandler with WebSocketChannelsHandler, which authenticated the user but did not call authorizer.is_authorized(...) for the execute action on the kernels resource. A restricted authenticated user could therefore open an upstream kernel channel and obtain kernel execution despite the configured Authorizer denying that action, exposing data and credentials available to the kernel and permitting modification or disruption of the kernel environment. The default gateway configuration is fixed in version 2.6.0. In 2.6.0 and later, the same authorization bypass remains possible when a deployment manually registers the deprecated jupyter_server.gateway.handlers module, because its handler still omits the configured kernel-execute authorization decision.

  3. CVE-2026-78118 7.0 Élevée

    zephyrproject zephyr

    The kernel helper z_waitq_head() (kernel/include/wait_q.h) reads the head of a thread wait queue, but on SMP systems it was called from several places without holding the scheduler spinlock _sched_spinlock that serializes wait-queue mutation. The consequential call site is z_timer_expiration_handler() in kernel/timer.c, which held only the timer subsystem lock timer_lock while reading timer->wait_q and then unpending, setting the return value of, and readying the thread it obtained. halt_thread() in kernel/sched.c removes an aborted thread from its wait queue while holding only _sched_spinlock, so the two paths are not mutually exclusive. When the last waiter is removed on another CPU inside that window, sys_dlist_peek_head() can return the list sentinel — a pointer into the k_timer object itself — typed as a struct k_thread * (with CONFIG_WAITQ_SCALABLE, rb_get_min() can return an arbitrary node of a tree being restructured), or it can return a pointer to a thread that has already been unpended and, for dynamically allocated threads, freed. The handler then calls unpend_thread_no_timeout(), which performs a sys_dlist_remove() through pointers read from that object, and arch_thread_return_value_set(), which writes unconditionally through the pointer. The result is out-of-bounds and use-after-free writes in supervisor context, plus scheduler state corruption; a milder outcome is a thread that has re-pended elsewhere being woken with a success return value from an unrelated blocking call. All of the primitives needed to drive the interleaving — k_timer_start(), k_timer_status_sync(), k_thread_create() and k_thread_abort() — are system calls, so with CONFIG_USERSPACE enabled an unprivileged user-mode thread can attempt the race against kernel-owned data. Exploitation requires a multi-CPU build (CONFIG_MP_MAX_NUM_CPUS greater than one; the affected region is a no-op on uniprocessor targets), local code execution, and winning a narrow timing window, so the practical outcome is most often a kernel crash rather than controlled corruption. The fix splits the helper into z_waitq_head_locked() for callers that already hold the scheduler spinlock and a z_waitq_head() that acquires it, and brings the timer expiration handler's head read, unpend and ready under a single LOCK_SCHED_SPINLOCK region.

  4. CVE-2026-19947 5.3 Moyenne

    zephyrproject zephyr

    The device multiplexer pseudo-driver in drivers/misc/devmux/devmux.c exposes two system calls, devmux_select_get() and devmux_select_set(). When CONFIG_USERSPACE is enabled, their user-mode verifiers z_vrfy_devmux_select_get() and z_vrfy_devmux_select_set() forwarded directly to the kernel implementations without performing any kernel-object validation — no k_object_access_check() and no driver object check. Compounding this, DEVICE_DT_INST_DEFINE() registered devmux instances with a NULL driver API pointer, which causes scripts/build/gen_kobject_list.py to skip them entirely, so a devmux device had no struct k_object and no permission on it could be granted or withheld in the first place. Any thread running in user mode can reach the defect: device pointers such as DEVICE_DT_GET(DT_NODELABEL(devmux0)) are compile-time constants available to application code, and the syscall accepted them from a thread that had never been granted access to the device. The kernel implementations do validate the pointer against the static devmux instance table and bounds-check the selection index, so this is not a memory-safety issue; the failure is purely one of authorization. Exposure requires CONFIG_USERSPACE=y together with the experimental CONFIG_DEVMUX=y (which depends on CONFIG_DEVICE_MUTABLE) and a zephyr,devmux devicetree node. An unprivileged user-mode thread can read and change which downstream device a multiplexer forwards to, bypassing the userspace object-permission model. Because a devmux forwards the data, configuration and API of the selected device — its documented use being zephyr,console and zephyr,shell-uart switching — an attacker can suppress console, log and shell output, redirect that output to a downstream device it is able to observe, or flip the selection underneath another thread that is legitimately using the multiplexer. The impact is bounded to the devicetree-fixed set of downstream devices; no out-of-bounds access or arbitrary pointer dereference is reachable. The fix declares __subsystem struct devmux_driver_api and attaches a DEVICE_API(devmux, devmux_api) instance to each devmux device so that it becomes a tracked K_OBJ_DRIVER_DEVMUX kernel object, and adds K_OOPS(devmux_inst_get(dev) == SIZE_MAX) plus K_OOPS(k_object_access_check(dev) != 0) to both verifiers.

  5. CVE-2026-19676 7.8 Élevée

    zephyrproject zephyr

    The user-mode verifier for the peci_transfer() system call, z_vrfy_peci_transfer() in drivers/peci/peci_handlers.c, checked only the device object permission and copied the caller-supplied struct peci_msg with k_usermode_from_copy(). That copy validates the outer structure only; the buf pointers and len values inside the embedded struct peci_buf members tx_buffer and rx_buffer remained fully caller-controlled and were passed unchecked to the driver. Every in-tree PECI driver dereferences those pointers in supervisor mode: peci_npcx_transfer() in drivers/peci/peci_npcx.c and peci_it8xxx2_transfer() in drivers/peci/peci_ite_it8xxx2.c copy hardware bytes into rx_buffer.buf[i] and read command bytes out of tx_buffer.buf[i], and peci_xec_read()/peci_xec_write() in drivers/peci/peci_mchp_xec.c do the same with no bound on rx_buffer.len at all. A user-mode thread that has been granted the PECI device object — the normal way an application exposes a device under CONFIG_USERSPACE — could therefore point rx_buffer.buf at kernel data structures and have the driver write hardware-supplied bytes there, or point tx_buffer.buf at kernel memory and have its contents pushed onto the PECI/eSPI out-of-band bus. The impact is a full user-mode-to-kernel escape: an arbitrary kernel write primitive (integrity and, through it, code execution at supervisor privilege), an arbitrary kernel read disclosed to a PECI bus observer, and a trivially reachable supervisor-mode fault if an unmapped address is supplied. Exploitation requires CONFIG_USERSPACE=y, one of the PECI drivers enabled (CONFIG_PECI_NPCX, CONFIG_PECI_XEC or CONFIG_PECI_ITE_IT8XXX2), and local code execution in a user-mode thread holding the PECI device. The fix adds K_SYSCALL_MEMORY_READ() and K_SYSCALL_MEMORY_WRITE() checks over the two embedded buffers, with a size_add_overflow() guard on the frame-check-sequence byte accounted for in the RX length.

  6. CVE-2026-98869 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: bpf: Infer zext_dst based on static register liveness analysis As reported in the thread [1], the verifier's 32-bit operations zero extension logic is broken. This logic is responsible for correct semantics of 32-bit operations on s390 architecture. According to BPF semantics, operation `w1 += 1` is supposed to zero extend the upper half of the register `r1`. On s390 the JIT relies on the verifier emitting explicit zero extension before such operations. The verifier attempts to minimize the amount of zero extensions inserted by tracking whether upper halves of the 64-bit registers are ever used. Previously such tracking worked as follows: - bpf_reg_state->subreg_def field was set by do_check_insn() for each operation defining lower but not the upper halves of the register. - Whenever an operation reading the whole register was verified, the verifier checked register's subreg_def and set bpf_insn_aux_data->zext_dst flag as true via a call to mark_insn_zext() function. - After the verification was complete, a special pass bpf_opt_subreg_zext_lo32_rnd_hi32() extended 32-bit operations with bpf_insn_aux_data->zext_dst set as true by adding explicit zero extension. Note that the logic above relies on bpf_reg_state->subreg_def, which is a property of a current verifier state. Before the commit [2] two additional steps happened: - The verifier tracked upper and lower register halves' liveness as flags REG_LIVE_READ{32,64} in bpf_reg_state->live. - The function propagate_liveness() called mark_insn_zext() in order to transfer the knowledge about which registers have their upper halves alive (and thus might require zero extension). The commit [2] removed the two steps described above, hence making possible a situation like below: - The register's upper half is set and is used on some verification path P1 and the register happens not to be marked as precise. - The checkpoint C is created while processing some instruction between register initialization and usage. - On some other verification path P2 the register's upper half is not initialized and that path ends hitting the checkpoint C. - In such a case the register's initialization on path P2 would lack zext_dst mark, making it possible for the program to inject an arbitrary value in the register's upper half. This commit replaces subreg_def based logic with computing zext_dst statically, as a part of the bpf_compute_live_registers() analysis: - The analysis now tracks usage of upper and lower halves of the registers separately. - If some instruction defines a 32-bit subregister, but not the whole register, *and* the upper half of the register is alive after that instruction, the instruction is marked as zext_dst. There is one notable drop in precision: whenever a BPF subprogram is called, all 64 bits of parameter registers are presumed to be used. The assumption is that such a drop in precision would not inflict a noticeable performance penalty. [1] https://lore.kernel.org/bpf/CAGKGUv=sOuqQtA1Ub-5JXfA4FPosJFYKAQE4B79cK+P1erxqtg@mail.gmail.com/ [2] commit 107e16979905 ("bpf: disable and remove registers chain based liveness")

  7. CVE-2023-7356 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID Copy the content of a Periodic Advertisement Report to BASE only if the service UUID is Basic Audio Announcement Service UUID.

  8. CVE-2026-91255 7.5 Élevée

    Oracle Corporation Oracle Solaris

    Vulnerability in the Oracle Solaris product of Oracle Systems (component: Kernel). The supported version that is affected is 11.4. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Solaris. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Solaris. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H).

  9. CVE-2026-91254 7.5 Élevée

    Oracle Corporation Oracle Solaris

    Vulnerability in the Oracle Solaris product of Oracle Systems (component: Kernel). The supported version that is affected is 11.4. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Solaris. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Solaris. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H).

  10. CVE-2026-91253 7.8 Élevée

    Oracle Corporation Oracle Solaris

    Vulnerability in the Oracle Solaris product of Oracle Systems (component: Kernel). The supported version that is affected is 11.4. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle Solaris executes to compromise Oracle Solaris. Successful attacks of this vulnerability can result in takeover of Oracle Solaris. CVSS 3.1 Base Score 7.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H).