Semaine du 19 octobre au 25 octobre 2026

webpack-dev-server

webpack-dev-server is a development server that provides live reloading for webpack projects. In versions from 5.1.0 before 5.2.7 and in version 6.0.0, the unauthenticated open-editor endpoint validates the Host header with a regular expression meant for browser Origin schemes, so a Host value beginning with file: or with an extension scheme short-circuits the hostname and allowedHosts checks. A network peer that can reach the dev server can send a request with a malformed Host that passes validation and then causes the endpoint's URL construction to throw, and in the default non-production mode the server returns an HTTP 500 body containing the full exception stack trace, which discloses absolute filesystem paths, installed module locations, and internal source line numbers. The server keeps running, so there is no denial of service. The issue is fixed in webpack-dev-server 5.2.7 and 6.1.0, and users should upgrade to one of those versions or later.

OpenVPN 3 Core Library

Improper certificate validation in the OpenVPN 3 Core library version 3.4 through 3.11.7 allows attackers to circumvent extended key usage restrictions.

WatchGuard Agent

A cleartext storage of sensitive information vulnerability in WatchGuard Endpoint Security's Full Disk Encryption feature for macOS allows a local, unprivileged user or process to obtain a managed computer's FileVault Personal Recovery Key by reading a persistently written diagnostic log file left readable by all local users.

hupe13 Extensions for Leaflet Map

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in hupe13 Extensions for Leaflet Map extensions-leaflet-map allows Stored XSS.This issue affects Extensions for Leaflet Map: from n/a through 6.0.

nicdark ND Shortcodes For Visual Composer

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in nicdark ND Shortcodes For Visual Composer nd-shortcodes allows Stored XSS.This issue affects ND Shortcodes For Visual Composer: from n/a through 7.8.

xootix Waitlist Woocommerce ( Back in stock notifier )

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in xootix Waitlist Woocommerce ( Back in stock notifier ) waitlist-woocommerce allows Stored XSS.This issue affects Waitlist Woocommerce ( Back in stock notifier ): from n/a through 2.9.1.

Gloriafood Restaurant Menu – Food Ordering System – Table Reservation

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Gloriafood Restaurant Menu – Food Ordering System – Table Reservation menu-ordering-reservations allows Stored XSS.This issue affects Restaurant Menu – Food Ordering System – Table Reservation: from n/a through 2.4.4.

yoomoney ЮKassa для WooCommerce

Missing Authorization vulnerability in yoomoney ЮKassa для WooCommerce yookassa allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects ЮKassa для WooCommerce: from n/a through 2.17.3.

myCred

Authorization Bypass Through User-Controlled Key vulnerability in myCred myCred mycred allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects myCred: from n/a through 4.0.0-beta.1.

miniOrange Page Restriction WordPress (WP)

Missing Authorization vulnerability in miniOrange Page Restriction WordPress (WP) page-and-post-restriction allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Page Restriction WordPress (WP): from n/a through 1.6.0.

WP Desk ShopMagic

Insertion of Sensitive Information into Externally-Accessible File or Directory vulnerability in WP Desk ShopMagic shopmagic-for-woocommerce allows Retrieve Embedded Sensitive Data.This issue affects ShopMagic: from n/a through 4.9.1.

Jory Hogeveen Off-Canvas Sidebars & Menus (Slidebars)

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Jory Hogeveen Off-Canvas Sidebars & Menus (Slidebars) off-canvas-sidebars allows Stored XSS.This issue affects Off-Canvas Sidebars & Menus (Slidebars): from n/a through 0.5.9.

ACF Extended

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in ACF Extended ACF Extended acf-extended allows Path Traversal.This issue affects ACF Extended: from n/a through 0.9.2.7.

Ahmad Majestic Support

Missing Authorization vulnerability in Ahmad Majestic Support majestic-support allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Majestic Support: from n/a through 1.2.1.

WP Sunshine Sunshine Photo Cart

Missing Authorization vulnerability in WP Sunshine Sunshine Photo Cart sunshine-photo-cart allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Sunshine Photo Cart: from n/a through 3.7.5.

vaadin android-json

The org.json parser in com.vaadin.external.google:android-json recurses once per nesting level with no depth limit: JSONTokener.nextValue() calls readArray() and readObject(), which call nextValue() again. A deeply nested JSON document, around 20 KB of nested arrays with the default thread stack, makes the JSONArray and JSONObject constructors throw a raw java.lang.StackOverflowError instead of a JSONException. Any application that parses untrusted JSON with this library can be made to fail the thread doing the parsing. The artifact is a 2013 repackage of third-party org.json classes, published once and never maintained, and no fixed version will be released. Users of the affected version should apply the following mitigation. Product version com.vaadin.external.google:android-json 0.0.20131108.vaadin1 Mitigation No fixed version will be released. Replace the artifact with an org.json implementation that limits the nesting depth, such as org.json:json 20231013 or later. Artifacts Maven coordinates / Vulnerable versions / Fixed version com.vaadin.external.google:android-json / 0.0.20131108.vaadin1 / none

Brainstorm Force SureDash

Missing Authorization vulnerability in Brainstorm Force SureDash suredash allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects SureDash: from n/a through 1.12.2.

Brainstorm Force SureDash

Missing Authorization vulnerability in Brainstorm Force SureDash suredash allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects SureDash: from n/a through 1.12.2.

pbuchbinder mod_qos

A flaw was found in mod_qos. An off-by-one pointer calculation error occurs when merging request body parameters with an existing URL query, which truncates the query string during security evaluation while leaving the actual request unchanged. An unauthenticated remote attacker could exploit this vulnerability by submitting a crafted request that conceals prohibited values from inspection, resulting in a bypass of configured security rules.

pbuchbinder mod_qos

A flaw was found in mod_qos. An unauthenticated remote attacker can cause a Denial of Service (DoS) by maintaining numerous concurrent low-rate connections to a target server. When connection rate monitoring is active, the module fails to verify array boundaries when recording client IP addresses, allowing more connection records to be added than the allocated buffer can hold. This issue leads to heap memory corruption, which can crash the web server process.

WPVibes Elementor Addon Elements

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in WPVibes Elementor Addon Elements addon-elements-for-elementor-page-builder allows Stored XSS.This issue affects Elementor Addon Elements: from n/a through 1.14.4.

IdeaBox Creations PowerPack Addons for Elementor

Missing Authorization vulnerability in IdeaBox Creations PowerPack Addons for Elementor powerpack-lite-for-elementor allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects PowerPack Addons for Elementor: from n/a through 3.1.0.

Wpmet Metform

Missing Authorization vulnerability in Wpmet Metform metform allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Metform: from n/a through 4.3.2.

DigitalME eRoom

Missing Authorization vulnerability in DigitalME eRoom eroom-zoom-meetings-webinar allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects eRoom: from n/a through 1.7.1.

H5P

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in H5P H5P h5p allows Stored XSS.This issue affects H5P: from n/a through 1.17.9.

WP Chill Strong Testimonials

Missing Authorization vulnerability in WP Chill Strong Testimonials strong-testimonials allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Strong Testimonials: from n/a through 3.3.14.

eLightUp Falcon – WordPress Optimizations & Tweaks

Missing Authorization vulnerability in eLightUp Falcon – WordPress Optimizations & Tweaks falcon allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Falcon – WordPress Optimizations & Tweaks: from n/a through 2.12.0.

Kings Plugins MarketKing

Missing Authorization vulnerability in Kings Plugins MarketKing marketking-multivendor-marketplace-for-woocommerce allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects MarketKing: from n/a through 2.1.72.

Unknown Link Library

The Link Library WordPress plugin before 7.9.6 does not sanitise and escape a link field before outputting it inside an attribute of a link preview, allowing users with the Contributor role and above to perform Stored Cross-Site Scripting attacks. The preview is generated without authentication and without checking whether the link has been published, so an unapproved submission is enough to reach any visitor who opens it.

WordPress Foundation WordPress

WordPress Core is vulnerable to Stored Cross-Site Scripting via Quick Edit in all versions up to, and including, 7.0.2 due to insufficient escaping of user display names. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a higher privileged user accesses the affected administrative screens. This issue only affects sites with a large number of users.

Unknown Photo Engine (Media Organizer & Lightroom)

The Photo Engine (Media Organizer & Lightroom) WordPress plugin before 6.5.8 does not verify that a user is authorised to act on the targeted media attachment, allowing authenticated users with the author role and above to delete arbitrary media attachments, including those uploaded by other users and administrators.

Unknown Photo Engine (Media Organizer & Lightroom)

The Photo Engine (Media Organizer & Lightroom) WordPress plugin before 6.5.8 does not sanitise and escape collection and gallery names before storing them and outputting them in an administrative dashboard, allowing authenticated users with the author role and above to perform Stored Cross-Site Scripting attacks.

Unknown MB Custom Post Types & Custom Taxonomies

The MB Custom Post Types & Custom Taxonomies WordPress plugin before 2.12.3 does not perform any capability or authentication check before allowing an unauthenticated request to re-run a legacy data migration, letting anyone revert a custom post type or taxonomy definition on sites upgraded from a pre-2.0 release back to its pre-upgrade state. This discards configuration changes an administrator made after upgrading and, where those changes had restricted a definition's visibility, silently re-exposes the definition and its content to anonymous visitors.

Unknown WP Ultimate Review

The WP Ultimate Review WordPress plugin before 2.4.5 does not neutralise shortcodes in all of the review fields submitted through its public review form, which is available to unauthenticated visitors, allowing them to execute arbitrary shortcodes when the affected field is displayed, provided user reviews and that field's display are enabled.

Unknown FluentCart A New Era of eCommerce

The FluentCart A New Era of eCommerce WordPress plugin before 2.2.0 does not verify that a stored customer address selected during checkout belongs to the requester, allowing unauthenticated attackers to attach any customer's stored address to an order they place and read it back, disclosing customers' postal addresses, phone numbers and company details.

NewType Infortech NT OneAPP

NT OneAPP developed by NewType Infortech has an Exposure of Sensitive Information vulnerability. Unauthenticated local attackers can extract plaintext usernames and passwords from backup data after obtaining ADB backup access authorization and user confirmation of the backup, resulting in sensitive information disclosure.

NewType Infortech NT OneAPP

NT OneAPP developed by NewType Infortech has an Authentication Bypass vulnerability. Unauthenticated local attackers can bypass the App PIN lock mechanism via a Deep Link, thereby accessing protected resources of a logged-in user.

Roundcube Webmail

Roundcube Webmail before 1.6.20 and 1.7.x before 1.7.5 is affected by an improper authentication vulnerability in multi-host installations. When a user logs in with an alias address, rcube_user::query() matched the address against identity records without qualifying the lookup by IMAP host, so a login could be resolved to a user account belonging to a different IMAP host. Upstream fixed this in the commit “Fix bug where an alias login wasn’t qualified by IMAP host”.

Roundcube Webmail

Roundcube Webmail before 1.6.20 and 1.7.x before 1.7.5 is affected by an uncontrolled resource consumption vulnerability in the CSS proxy (the utils/modcss action). The fetched stylesheet was read into memory in full, with no size limit and no read timeout, so a stylesheet URL referencing an attacker-controlled host could be used to exhaust server memory. Upstream fixed this in the commit “Add a size limit to the CSS proxy content processing”, which caps the response at 5 MB, reads it as a stream and applies a read timeout.

Roundcube Webmail

Roundcube Webmail before 1.6.20 and 1.7.x before 1.7.5 is affected by a remote content blocking bypass. rcube_washtml inspected the SVG SMIL animation attributes `to`, `from` and values for URIs, but not `by`; so markup such as in an HTML message caused remote content to be loaded without the user's consent, disclosing the client IP address and confirming that the message was opened. Upstream fixed this in the commit “Fix remote-content blocker bypass via SVG SMIL `by` attribute”.

Roundcube Webmail

Roundcube Webmail before 1.6.20 and 1.7.x before 1.7.5 is affected by a remote content blocking bypass in the handling of FuncIRI attributes. rcube_washtml detected the CSS url() token with a pattern that enumerated only some of its escaped spellings, so values using other CSS escape sequences, for example \000075rl( or u\72 l(, were not recognized and remote content was loaded from an HTML message without the user's consent. Upstream fixed this in the commit “Fix remote content blocking bypass via CSS escapes in FuncIRI attributes (again)”, which resolves CSS escapes before matching and also inspects the `to`, `from` and `by` attributes.

Roundcube Webmail

Roundcube Webmail before 1.6.20 and 1.7.x before 1.7.5 is affected by a mail header injection vulnerability in the Bounce (resend) action. rcube_mime::decode_address_list() did not strip control characters from the decoded display name, so a received message whose From display-name carries CRLF sequences in an encoded word could inject arbitrary headers into the message emitted when the user bounces it. Upstream fixed this in the commit “Fix mail header injection via the From display-name in the Bounce (resend) action”.

Roundcube Webmail

Roundcube Webmail before 1.6.20 and 1.7.x before 1.7.5 is affected by a mail header injection vulnerability. rcmail_sendmail stripped newline characters only from the Subject and Organization headers, leaving other header values taken from request parameters unsanitized, so a remote authenticated attacker could inject arbitrary headers into an outgoing message via the References, In-Reply-To, Message-ID and From parameters. Upstream fixed this in the commit “Fix mail header injection via References/In-Reply-To/Message-ID/From parameters”, which normalizes whitespace in every string header value.

Roundcube Webmail

Roundcube Webmail before 1.6.20 and 1.7.x before 1.7.5 is affected by a CSS scoping bypass in HTML messages. rcube_utils::mod_css_styles() did not treat an at-rule prologue such as @layer a; as a selector boundary, and did not handle selectors beginning with ::, so selectors following an at-rule were left unscoped and applied to the whole Roundcube interface instead of being confined to the message body. This allows an HTML message to restyle application chrome for UI redressing and spoofing. Upstream fixed this in the commit “Fix CSS scoping bypass in HTML messages using at-rules”.

Roundcube Webmail

Roundcube Webmail before 1.6.20 and 1.7.x before 1.7.5 is affected by a cross-site scripting vulnerability in the password plugin. Error text returned by a password driver was concatenated into the message presented to the user without HTML escaping, so a backend able to influence that text, such as the DirectAdmin API, could inject script into the Roundcube interface. Upstream fixed this in the commit “Fix XSS issue in handling of password driver error responses”, which escapes the driver message before display.

Roundcube Webmail

Roundcube Webmail before 1.6.20 and 1.7.x before 1.7.5 is affected by a mail header injection vulnerability when a message is forwarded as an attachment. The subject of the forwarded message was used verbatim to generate the attachment name, so a received message whose subject contains CRLF sequences could inject arbitrary MIME part headers into the outgoing message. Upstream fixed this in the commit “Fix mail header injection via subject of a message forwarded as attachment”, which collapses whitespace in the generated name.

Roundcube Webmail

Roundcube Webmail before 1.6.20 and 1.7.x before 1.7.5 is affected by an incorrect authorization vulnerability in the Modoboa driver of the password plugin. The driver took the first entry of the account search result returned by the Modoboa API instead of matching the authenticated user, so a password change could be applied to a different account. Upstream fixed this in the commit “Fix bug where Password Modoboa driver could change password for another account”, which selects the account whose username matches and fails if none does.

getgrav grav

Grav from 2.0.0 before 2.2.5 contains an improper access control vulnerability in FlexDirectory::dynamicFlexField() that allows page authors to call arbitrary Flex object methods via flex-*@ directives in page frontmatter. When a user with page edit rights opens the page, directives calling setStorageKey() and delete() run in their session, deleting protected pages neither account may delete.

getgrav grav-plugin-flex-objects

Grav Flex Objects plugin 1.4.0 before 1.4.17 contains an authorization bypass because its generic /api/v1/flex-objects/pages API routes check only directory-level admin.pages permissions, without enforcing the Pages API's api.pages.read/write permissions or page-level permissions rules. Authenticated non-super users with api.access and admin.pages or admin.configuration.pages permissions can read page source and frontmatter, modify content, or delete pages they are denied.

getgrav grav

Grav from 2.0.0 before 2.2.5 contains an information disclosure vulnerability that allows page authors to capture visitors' HTTP Basic credentials through Twig page content. Authors can print the request Uri object, which embeds PHP_AUTH_USER and PHP_AUTH_PW, inside an inline style background image to exfiltrate administrators' credentials to an external host.

WWBN AVideo

WWBN AVideo before 29.4.0 contains a blind server-side request forgery vulnerability in getHeaderContentTypeFromURL() because get_headers() follows redirects without re-validating targets with isSSRFSafeURL(). Authenticated uploaders can store a videoLink pointing to a redirector, causing internal GET requests when visitors view the video, enabling internal port scanning via the embed-versus-video render oracle.

WWBN AVideo

WWBN AVideo before 29.4.0 contains an incorrect authorization vulnerability that allows delegated Users Admin accounts to delete or modify administrator accounts. Attackers can submit requests to confirmDeleteUser.json.php or userAddNew.json.php targeting administrators to delete their videos and accounts, or change and demote them.

GitLab

GitLab has remediated an issue in GitLab EE affecting all versions from 12.0 before 19.3.6, 19.4 before 19.4.3, and 19.5 before 19.5.1 that, when the instance-wide SAML or LDAP membership lock was enabled, an authenticated user could have granted or accepted project and group membership outside the identity provider's control, due to incomplete enforcement of the membership lock on requests created before the lock was enabled.

GitLab

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 15.10 before 19.3.6, 19.4 before 19.4.3, and 19.5 before 19.5.1 that, could have allowed an authenticated to read milestone metadata, including titles, descriptions, and full project paths, from arbitrary private projects across the instance without any project membership, due to missing authorization checks on a user-supplied project filter parameter in the group milestones API.

GitLab

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.2 before 19.3.6, 19.4 before 19.4.3, and 19.5 before 19.5.1 that, under certain conditions, could have allowed an authenticated user with a read_api-scoped token to retrieve a project's incoming email address and create work items, bypassing the token's restrictions, due to insufficient scope enforcement on a GraphQL field.

Roundcube Webmail

Roundcube Webmail before 1.6.20 and 1.7.x before 1.7.5 is affected by a path traversal vulnerability in the squirrelmail_usercopy plugin. With the file based backend, the source path was built from the login name without rejecting path separators, so a login name containing a slash could cause files outside the configured squirrelmail_data_dir to be read and imported. Upstream fixed this in the commit “Fix unsafe use of a login name in SquirrelMail import file path”, which rejects login names containing a slash.

massCodeIO massCode

A security vulnerability has been detected in massCodeIO massCode 5.10. Affected is an unknown function of the file src/main/api/index.ts of the component Local HTTP Service. Such manipulation leads to information disclosure. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. The name of the patch is d25d8fa3f5a1e34285c8634f18729650c0c05cda. It is advisable to implement a patch to correct this issue.

GitLab

GitLab has remediated an issue in GitLab EE affecting all versions from 17.8 before 19.3.6, 19.4 before 19.4.3, and 19.5 before 19.5.1 that under certain conditions could have allowed an authenticated user to access paid AI features without a valid subscription due to insufficient server-side validation in billing eligibility checks.

GitLab

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 17.6.5 before 19.3.6, 19.4 before 19.4.3, and 19.5 before 19.5.1 that, under certain conditions, an unauthenticated user could have retrieved sensitive internal server credentials due to improper filtering of internal response headers.

TP-Link Systems Inc. Archer C6 V2

A hardcoded cryptographic key management vulnerability exists in Archer C6 due to the use of a universal cryptographic key shared across devices. An attacker who obtains an encrypted configuration file or other protected credential data can recover plaintext credentials.  Successful exploitation may allow unauthorized disclosure of sensitive information, including administrative credentials.

Splunk SOAR

In Splunk SOAR versions below 8.7.0, an unauthenticated user with access to encrypted credential data from an affected Splunk SOAR instance could submit Basic authentication data to the Representational State Transfer (REST) API to expose and decrypt that encrypted credential data. The vulnerability is possible because Splunk SOAR decrypts encrypted Basic authentication values before completing authentication checks. The attack requires the unauthenticated user to have encrypted credential data from an affected Splunk SOAR instance. The unauthenticated user should not be able to exploit the vulnerability at will. For more information see Using the REST API reference for Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/rest-api-reference/8.5.0/using-the-splunk-soar-rest-api/using-the-rest-api-reference-for-splunk-soar-on-premises) in the Splunk documentation.

Splunk SOAR

In Splunk SOAR versions below 8.7.0, an authenticated user could change the Enterprise Security edition through the Representational State Transfer (REST) API and cause Splunk SOAR to apply the license change. The vulnerability is possible because Splunk SOAR authenticates requests to manage the Enterprise Security edition but does not authorize the caller before it applies the license change. For more information see Using the REST API reference for Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/rest-api-reference/8.7.0/using-the-splunk-soar-rest-api/using-the-rest-api-reference-for-splunk-soar-on-premises), Obtain and configure a Splunk SOAR (On-premises) license (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/8.7.0/configure-your-companys-settings-in-splunk-soar-on-premises/obtain-and-configure-a-splunk-soar-on-premises-license), and Integration of Splunk SOAR with Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/administer/8.7/automation-with-playbooks/integration-of-splunk-soar-with-splunk-enterprise-security) in the Splunk documentation.

Splunk SOAR

In Splunk SOAR versions below 8.7.0, an authenticated user who does not hold a role with permission to view apps could download an archive of an installed app. This could expose all data in the app archive, including proprietary source code and sensitive information. The vulnerability is possible because Splunk SOAR does not verify permission to view apps before it returns the app archive. For more information see Export or import an app (https://help.splunk.com/en/splunk-soar/soar-on-premises/develop-apps/8.4.0/develop-an-app-using-the-splunk-soar-app-wizard/export-or-import-an-app) and Manage roles and permissions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/8.5.0/manage-your-splunk-soar-on-premises-users-and-accounts/manage-roles-and-permissions-in-splunk-soar-on-premises) in the Splunk documentation.

Splunk SOAR

In Splunk SOAR versions below 8.7.0, an authenticated user who does not hold a role with permission to edit Automation Brokers could download the Splunk SOAR Automation Broker Docker Compose configuration file. The file contains the Uniform Resource Locator (URL) of the Splunk SOAR instance, the container image location, and the Splunk SOAR Automation Broker version. The vulnerability is possible because Splunk SOAR returns the configuration file without enforcing the Automation Broker edit permission. For more information see Install Splunk Automation Broker on a Docker host (https://help.splunk.com/en/splunk-soar/splunk-automation-broker/install-and-create-classic-splunk-soar-automation-brokers/install-splunk-automation-broker-on-a-docker-host) and Manage roles and permissions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/8.5.0/manage-your-splunk-soar-on-premises-users-and-accounts/manage-roles-and-permissions-in-splunk-soar-on-premises) in the Splunk documentation.

Splunk SOAR

In Splunk SOAR versions below 8.7.0, a user that holds a role with the install_apps capability could store attacker-controlled content that Splunk SOAR displays in app documentation by installing an app. If another user who holds a role with permission to view apps opens the app documentation, Splunk SOAR could run that content in the browser of the user who opened the app documentation. With this access, the first user could access data and make changes that the user who opened the app documentation could make. The vulnerability is possible because Splunk SOAR does not sanitize app documentation content before it displays that content. The vulnerability requires the attacker to phish the affected user by tricking them into initiating a request within their browser. The user that holds a role with the install_apps capability should not be able to exploit the vulnerability at will. For more information see Manage roles and permissions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/7.1.0/manage-your-splunk-soar-on-premises-users-and-accounts/manage-roles-and-permissions-in-splunk-soar-on-premises) and Add and configure apps and assets to provide actions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/8.6.0/manage-your-splunk-soar-on-premises-apps-and-assets/add-and-configure-apps-and-assets-to-provide-actions-in-splunk-soar-on-premises) in the Splunk documentation.

Splunk Enterprise

In Splunk Enterprise versions below 10.4.4, 10.2.8, 10.0.11, and 9.4.16, an unauthenticated user could trick a user that holds a role with the edit_federated_providers capability into turning off all federated search providers. Successful exploitation could temporarily prevent federated searches from retrieving data from remote datasets. The vulnerability is possible because the federated provider Representational State Transfer (REST) API accepts GET requests for actions that change provider state. The vulnerability requires the attacker to phish the affected user by tricking them into initiating a request within their browser. The unauthenticated user should not be able to exploit the vulnerability at will. For more information see Run federated searches over remote Splunk platform deployments (https://help.splunk.com/en/splunk-enterprise/search/federated-search/10.6/run-federated-searches-across-other-splunk-deployments/run-federated-searches-over-remote-splunk-platform-deployments) and Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) in the Splunk documentation.

Splunk Enterprise

In Splunk Enterprise versions below 10.4.4, 10.2.8, 10.0.11, and 9.4.16, a user who does not hold the "admin" or "power" Splunk roles could create, move, edit, or delete sourcetype renaming configurations that they own in apps that they do not have permission to access. The vulnerability is possible when Splunk Web is turned on because Splunk Web does not verify the required app permissions before it performs sourcetype renaming operations. For more information see Rename source types at search time (https://help.splunk.com/en/splunk-enterprise/get-started/get-data-in/10.6/configure-source-types/rename-source-types-at-search-time) in the Splunk documentation.

Splunk Enterprise · Splunk Secure Gateway

In Splunk Enterprise versions below 10.4.4, 10.2.8, 10.0.11, and 9.4.16, and Splunk Secure Gateway versions below 3.10.12, 3.9.26, and 3.8.73, a user who does not hold the "admin" or "power" Splunk roles could view dashboard and report listings beyond the requested filter scope while remaining within objects that the user can access. The vulnerability is possible because Splunk Secure Gateway does not neutralize special characters in values before it creates filters for dashboard and report requests. For more information see About configuring role-based user access (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.2/manage-splunk-platform-users-and-roles/about-configuring-role-based-user-access) in the Splunk documentation.

Splunk Enterprise

In Splunk Enterprise versions below 10.4.4, 10.2.8, 10.0.11, and 9.4.16, a user who does not hold the "admin" or "power" Splunk roles could move field extractions or field transformations to apps for which the user does not have read access. The vulnerability is possible because the Representational State Transfer (REST) API does not validate destination app access before it processes field extraction and field transformation move operations. For more information see Use the Field extractions page (https://help.splunk.com/en/splunk-enterprise/manage-knowledge-objects/knowledge-management-manual/10.6/use-the-settings-pages-for-field-extractions-in-splunk-web/use-the-field-extractions-page) and Manage knowledge object permissions (https://help.splunk.com/en/splunk-enterprise/manage-knowledge-objects/knowledge-management-manual/10.6/get-started-with-knowledge-objects/manage-knowledge-object-permissions) in the Splunk documentation.

Splunk Enterprise · Splunk Secure Gateway

In Splunk Enterprise versions below 10.4.4, 10.2.8, 10.0.11, and 9.4.16, and Splunk Secure Gateway versions below 3.10.12, 3.9.26, and 3.8.73, a low-privileged user that does not hold the "admin" Splunk role or the "sc_admin" Splunk Secure Gateway role could read mobile alert notification data for other users through Splunk Secure Gateway App Key Value Store (KV Store) Representational State Transfer (REST) API endpoints. The vulnerability is possible because the affected Splunk Secure Gateway App Key Value Store collections do not enforce user-level authorization for read requests. For more information see About the app key value store (https://help.splunk.com/en/splunk-enterprise/administer/admin-manual/10.2/administer-the-app-key-value-store/about-the-app-key-value-store) and About configuring role-based user access (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.2/manage-splunk-platform-users-and-roles/about-configuring-role-based-user-access) in the Splunk documentation.

Splunk Enterprise

In Splunk Enterprise versions below 10.4.4, 10.2.8, 10.0.11, and 9.4.16, a user who does not hold the "admin" or "power" Splunk roles could make the Splunk Enterprise instance unavailable to other users by sending a request to the Representational State Transfer (REST) API endpoint for lookup table files. The affected instance requires a restart to restore service. The vulnerability is possible because the endpoint does not limit resource use when it processes response field selections. For more information see Endpoints reference list (https://help.splunk.com/en/splunk-enterprise/rest-api-reference/10.4/introduction/endpoints-reference-list) and About configuring role-based user access (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/about-configuring-role-based-user-access) in the Splunk documentation.

Splunk Enterprise

In Splunk Enterprise versions below 10.4.4, a user that holds a role with the preview_data_management_pipeline capability or edit_data_management_pipeline_job capability could read or delete Data Management SPL2 preview jobs and results outside their ownership scope. The vulnerability is possible because the Data Management Representational State Transfer (REST) API verifies the required capability but does not verify that the requested preview job belongs to the requester. The affected Data Management REST API is available only when the Edge Processor feature is turned on. The Edge Processor feature is turned off by default. For more information see Set up a data management control plane (https://help.splunk.com/en/splunk-enterprise/process-data-at-the-edge/use-edge-processors-for-splunk-enterprise/10.4/getting-started/set-up-a-data-management-control-plane) and Getting sample data for previewing data transformations (https://help.splunk.com/en/splunk-enterprise/process-data-at-the-edge/use-edge-processors-for-splunk-enterprise/10.4/working-with-pipelines/getting-sample-data-for-previewing-data-transformations) in the Splunk documentation.

TP-Link Systems Inc. Deco BE63 V2.0

A sensitive information disclosure vulnerability in the cloud-client daemon of Deco BE63 allows authenticated attackers to retrieve the plaintext TP-Link ID account password.  Successful exploitation may allow attackers to compromise the associated cloud account and perform unauthorized actions on behalf of the affected user.

laravel framework

Laravel is a web application framework. From 12.45.0 until 12.68.0 and 13.27.0, crafted relationship inclusion on a read-only endpoint can trigger a destructive database operation on a related table instead of retrieving data. A user with read access but no write permission can empty related-table data, causing irreversible data loss, denial of service, and loss of data integrity. This issue is fixed in versions 12.68.0 and 13.27.0.

python-pillow Pillow

Pillow is a Python imaging library. From 11.2.1 until 13.0.0, Arrow export assumes that an image's rows are tightly contiguous and exports from im->blocks[0].ptr even when PILLOW_ALIGNMENT makes aligned_linesize include row padding or an aligned offset before the first row. The resulting Arrow buffer can include uninitialized padding, bytes preceding the first row, or stale heap contents from previously freed images. Applications that configure alignment and export images to Arrow can therefore disclose one user's pixels or other process memory to another user. This issue is fixed in version 13.0.0.

itsourcecode Online Cake Ordering System

A security vulnerability has been detected in itsourcecode Online Cake Ordering System 1.0. Affected is an unknown function of the file /transactionsave.php. Such manipulation of the argument del leads to sql injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used.

itsourcecode Online Cake Ordering System

A vulnerability was determined in itsourcecode Online Cake Ordering System 1.0. The affected element is an unknown function of the file /orderdetail.php. Executing a manipulation of the argument ID can lead to sql injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized.

python-pillow Pillow

Pillow is a Python imaging library. Prior to 13.0.0, PILfont text-width accumulation in src/_imaging.c checks positive glyph advances against INT_MAX but does not check negative advances against INT_MIN. Repeating a signed 16-bit advance of -32768 can therefore execute a signed C integer overflow in xsize += dx, producing a large positive width from a negative mathematical result. Applications that use getlength(), getsize(), or derived layout, quota, serialization, or allocation calculations can experience logic-integrity errors or resource consumption, while the high-level mask path commonly retains a decompression-bomb check. This issue is fixed in version 13.0.0.

python-pillow Pillow

Pillow is a Python imaging library. From 9.1.0 until 13.0.0, BmpRleDecoder.decode() in src/PIL/BmpImagePlugin.py permits crafted RLE BMP delta escapes and absolute-mode runs to append beyond the remaining dest_length without a per-branch cap. A delta can add roughly 255 image rows in one iteration, so a kilobyte-sized file with a large but permitted width can expand the data bytearray to hundreds of megabytes or more, causing memory-exhaustion denial of service. This issue is fixed in version 13.0.0.

python-pillow Pillow

Pillow is a Python imaging library. Prior to 13.0.0, MpoImageFile.seek() and DcxImageFile.seek() reparse later MPO or DCX frames and replace self._size without rerunning Image._decompression_bomb_check(). A crafted multi-frame image can use a tiny first frame to pass Image.open() and then declare an over-limit later frame. Normal frame iteration through seek(), load(), or ImageSequence.Iterator can decode that frame and commit hundreds of megabytes or more, causing memory-exhaustion denial of service. This issue is fixed in version 13.0.0.

Red Hat Hardened Images · Red Hat Assisted Installer for Red Hat OpenShift Container Platform 2 · Red Hat cert-manager Operator for Red Hat OpenShift · Red Hat Confidential Compute Attestation

The system certificate authority (CA) store in Red Hat products, distributed via ca-certificates RPM packages, included multiple root CA certificates of authorities, which signed intermediate CA certificates with weak private keys issued by the eMudhra certificate authority. A man-in-the-middle attacker could use this flaw to issue certificates for arbitrary host names signed by the weak intermediate CA certificates, which would be considered trusted by a TLS/SSL client using system CA store and cause such clients to connect to malicious sites. Due to inability to only distrust specific intermediate certificates in all clients using the system CA store, root CA certificates of authorities that signed weak intermediate CA certificates are being removed.

itsourcecode Online Cake Ordering System

A vulnerability was found in itsourcecode Online Cake Ordering System 1.0. Impacted is an unknown function of the file /inserttrans.php. Performing a manipulation of the argument prcd results in sql injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used.

EKKOLearnAI ekko-studio

A flaw has been found in EKKOLearnAI ekko-studio up to 1.0.6. This vulnerability affects the function saveGeneratedImages of the file packages/server/src/modules/studio/controllers/media.ts of the component Media Generation API. This manipulation of the argument output_path causes file inclusion. Remote exploitation of the attack is possible. Patch name: 1d42459c292f89e412f7f6243829e7fed2e85bf5. It is recommended to apply a patch to fix this issue.

itsourcecode Online Cake Ordering System

A vulnerability was detected in itsourcecode Online Cake Ordering System 1.0. This affects an unknown part of the file /deleteproduct.php. The manipulation of the argument ID results in sql injection. The attack may be launched remotely. The exploit is now public and may be used.

Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7 · Red Hat Enterprise Linux 8

A flaw was found in OpenSCAP. When decomposing a Source DataStream (SDS) file, the application does not properly validate relative file path attributes, leading to a path traversal vulnerability. An attacker can exploit this flaw by tricking a user or automated system into decomposing a crafted datastream containing directory traversal sequences. Successful exploitation allows unauthorized file creation or modification outside the intended target directory with the permissions of the executing process.

Red Hat Build of Keycloak · Red Hat Single Sign-On 7

A flaw was found in the Update User Locale required action of the Keycloak identity and access management solution. When this action is ordered before the Configure OTP action in a realm, the system may fail to enforce mandatory multi-factor authentication enrollment during the login process. This issue allows an attacker with a valid password to access an account without setting up the required one-time password (OTP) credential.

leomoon-studios wiki-go

A weakness has been identified in leomoon-studios wiki-go up to 1.9.1. Affected by this vulnerability is the function SaveHandler/SourceHandler of the file internal/handlers/editor.go of the component API. Executing a manipulation can lead to path traversal. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. Upgrading to version 1.9.2 addresses this issue. This patch is called 94f7e73ef8df7c58091d72d77a5e26e9fdad98b8. Upgrading the affected component is advised.

leomoon-studios wiki-go

A security flaw has been discovered in leomoon-studios wiki-go up to 1.9.1. Affected is the function RenameFileHandler of the file internal/handlers/files.go of the component Files Rename API. Performing a manipulation of the argument currentPath/newName results in path traversal. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. Upgrading to version 1.9.2 is able to address this issue. The patch is named 81cd12e248314a52605f0f39718c8a76272eac29. It is recommended to upgrade the affected component.

leomoon-studios wiki-go

A vulnerability was identified in leomoon-studios wiki-go up to 1.9.1. This impacts an unknown function of the file internal/handlers/metadata_api.go of the component fetch-metadata Endpoint. Such manipulation leads to server-side request forgery. It is possible to launch the attack remotely. The exploit is publicly available and might be used. Upgrading to version 1.9.2 will fix this issue. The name of the patch is 25498ebf5c012b870967e38eec2a1e5133fa1a83. Upgrading the affected component is recommended.

HarnessRouter

A flaw has been found in HarnessRouter up to 0.31.12. This impacts an unknown function of the file gateway/app.py of the component Targets Test Endpoint. Executing a manipulation of the argument base_url can lead to server-side request forgery. The attack may be performed from remote. Upgrading to version 0.31.13 will fix this issue. This patch is called 1c4b1fc1f89737dabd089ac1d1c174a57f764e28. It is suggested to upgrade the affected component.

Apache Software Foundation Apache Traffic Server

Apache Traffic Server can crash with a null pointer dereference when a client POST request is torn down via half-close while a chunked origin response is being reparsed from a reentrant write-ready callback, a timing-dependent race introduced by the CVE-2021-32564 flow-control backports. This issue affects Apache Traffic Server: 9.2.15, 10.1.4, 10.2.0. Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue.

Apache Software Foundation Apache Traffic Server

Apache Traffic Server can stall a chunked transfer that it passes through with its trailers removed (proxy.config.http.drop_chunked_trailers) until the connection times out, because it waits for the trailer bytes it has already dropped. Trailer dropping is on by default in 10.x. In 8.1.11 and 9.2.x it is off by default, and those versions are affected only if it is enabled. This issue affects Apache Traffic Server: 8.1.11, from 9.2.5 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0. Users are recommended to upgrade to version 10.1.5 or 10.2.1, which fix the issue.

zephyrproject zephyr

The Nuvoton NPCX eSPI driver parses Target-Attached-Flash (TAF) requests in espi_taf_parse() (drivers/espi/espi_npcx.c), taking the 12-bit length field directly out of the request header in the FLASHRXBUF FIFO. For write and RPMC OP1 requests it copied DIV_ROUND_UP(len, 4) words into struct espi_taf_pckt.src, a fixed 16-word (64-byte) member of a static structure, without ever comparing the length against that buffer or against the negotiated eSPI receive payload size (rx-plsize, 64 bytes on all in-tree NPCX/NPCK SoCs). Both the loop counter and the word count were uint8_t, so the copy ran up to 255 iterations. An eSPI controller that emits a flash request whose header claims a payload larger than the negotiated maximum therefore drives up to 239 32-bit stores past the end of the structure — roughly 956 bytes of out-of-bounds write into .bss — from the eSPI flash receive interrupt handler, while the source reads walk past the end of the 18-word FLASHRXBUF register array into neighbouring eSPI registers. The same unvalidated length was then passed on to flash_write() in espi_taf_npcx_flash_write() with the 64-byte src buffer as source, reading up to 4 KB of adjacent controller SRAM into SPI flash at a host-chosen address, where the host can read it back. A related fixed-size stack buffer in taf_npcx_completion_handler() was overflowed by four bytes on the maximum-size completion path on SoCs whose tx-plsize is 64. The defect is reachable only from the eSPI host side, and only by a request that violates the negotiated payload size, so it requires host firmware or bus-level control rather than ordinary host software; a compliant maximum-length write fits the buffer exactly and is handled correctly. Because TAF exists specifically so that the embedded controller arbitrates host access to shared flash (espi_taf_check_read_protect() / espi_taf_check_write_protect()), corrupting controller memory from a host-supplied field crosses the trust boundary the feature asserts; consequences range from controller crash or hang to corruption of driver state that gates the flash protection regions. The fix widens the counters, rejects any request whose word count exceeds both ARRAY_SIZE(FLASHRXBUF) - NPCX_ESPI_FLASH_HEADER_ADDRESS_LEN and NPCX_TAF_RX_PAYLOAD_WORDS (derived from the devicetree rx-plsize), marks such packets with a new invalid_flag so espi_taf_work() answers them with an unsuccessful completion instead of processing them, bounds the transmit payload against FLASHTXBUF, and adds a default case for unsupported cycle types. Only configurations with CONFIG_ESPI_TAF enabled on an NPCX/NPCK target are affected; no in-tree board enables it by default.

zephyrproject zephyr

The Infineon PSOC 6 BLESS HCI driver in drivers/bluetooth/hci/hci_infineon_psoc6_bless.c stored the outgoing HCI packet descriptor in a file-scope variable, static cy_stc_ble_hci_tx_packet_info_t hci_tx_pkt. psoc6_bless_send() cleared and populated that descriptor's packetType, dataLength and data fields before acquiring psoc6_bless_operation_sem, so the driver's serialising semaphore protected only the call into Cy_BLE_SoftHciSendAppPkt() and not the shared state that call reads. The Bluetooth host does not guarantee a single HCI sender. Most transmissions are funnelled through the cooperative TX-processor work queue, but bt_hci_cmd_send() deliberately bypasses bt_dev.cmd_tx_queue for BT_HCI_OP_HOST_NUM_COMPLETED_PACKETS and calls bt_send() directly from the caller's thread; that caller is bt_hci_host_num_completed_packets(), the acl_in_pool destroy callback, which runs on whichever thread drops the last reference to a received ACL buffer. CONFIG_BT_HCI_ACL_FLOW_CONTROL defaults to y on this driver's boards, and an application that returns -EINPROGRESS from its L2CAP recv callback and later calls bt_l2cap_chan_recv_complete() performs that unref from its own preemptible thread. A remote peer that generates Bluetooth traffic concurrently with the device's own transmissions raises the collision rate. When two senders interleave, the semaphore holder can hand the controller a descriptor whose dataLength comes from one net_buf and whose data pointer comes from another — or one whose buffer has already been returned to its pool. The controller then copies and transmits up to a full HCI/ACL payload starting at a shorter or recycled buffer, disclosing adjacent RAM contents to the connected peer; other interleavings duplicate one HCI packet and silently drop another, disrupting the link. The driver only reads through the shared descriptor, so no memory corruption or write primitive results, and the disclosed bytes are not attacker-chosen. The fix makes the descriptor a local variable in psoc6_bless_send(), removing the shared state; Cy_BLE_SoftHciSendAppPkt() copies the packet before returning, so it need not outlive the call.

zephyrproject zephyr

The Broadcom AFBR-S50 time-of-flight sensor driver double-completes an RTIO submission when sensor data evaluation fails. In data_ready_work_handler() (drivers/sensor/broadcom/afbr_s50/afbr_s50.c), a non-STATUS_OK return from Argus_EvaluateData() calls handle_error_on_result(), which finalises the request with rtio_iodev_sqe_err(), but execution then fell through to the tail of the function and finalised the very same struct rtio_iodev_sqe a second time with rtio_iodev_sqe_ok(). Unlike the other error branches in the same function, this one did not return. Both completion helpers reach rtio_executor_done() in subsys/rtio/rtio_executor.c, which returns the submission to the pool via rtio_sqe_pool_free() and, for streaming (multishot) submissions, also releases the RX buffer with rtio_release_buffer(). The second completion therefore reads a freed rtio_iodev_sqe, pushes the same mpsc node onto the submission queue while it is already on the pool free list — splicing the two lists together — and re-submits the freed request so the next measurement is written through an already-released buffer. For one-shot submissions it emits a spurious success completion carrying stale userdata and frees the same pool entry twice. The failure branch is driven by sensor conditions rather than by host software. The vendor API documents statuses such as ERROR_ARGUS_BIAS_VOLTAGE_REINIT and ERROR_ARGUS_LASER_MONITOR_INACTIVE as transient results of harsh ambient light, so a party in front of the optical sensor can provoke the invalid-data condition without any physical contact with the board or any software access; SPI transfer errors reach the same branch. In releases before the payload.Status check was dropped, ordinary sharp distance transitions in the sensor's field of view were sufficient. Impact is corruption of the RTIO submission pool and mempool bookkeeping: aliased submissions, writes through released buffers, and duplicate completions delivered to the application. The attacker does not control the corrupted content, so the practical consequence is memory corruption and loss of availability on devices that instantiate brcm,afbr-s50, rather than directed code execution. Only builds that enable this driver are affected.

zephyrproject zephyr

The device multiplexer pseudo-driver in drivers/misc/devmux/devmux.c exposes two system calls, devmux_select_get() and devmux_select_set(). When CONFIG_USERSPACE is enabled, their user-mode verifiers z_vrfy_devmux_select_get() and z_vrfy_devmux_select_set() forwarded directly to the kernel implementations without performing any kernel-object validation — no k_object_access_check() and no driver object check. Compounding this, DEVICE_DT_INST_DEFINE() registered devmux instances with a NULL driver API pointer, which causes scripts/build/gen_kobject_list.py to skip them entirely, so a devmux device had no struct k_object and no permission on it could be granted or withheld in the first place. Any thread running in user mode can reach the defect: device pointers such as DEVICE_DT_GET(DT_NODELABEL(devmux0)) are compile-time constants available to application code, and the syscall accepted them from a thread that had never been granted access to the device. The kernel implementations do validate the pointer against the static devmux instance table and bounds-check the selection index, so this is not a memory-safety issue; the failure is purely one of authorization. Exposure requires CONFIG_USERSPACE=y together with the experimental CONFIG_DEVMUX=y (which depends on CONFIG_DEVICE_MUTABLE) and a zephyr,devmux devicetree node. An unprivileged user-mode thread can read and change which downstream device a multiplexer forwards to, bypassing the userspace object-permission model. Because a devmux forwards the data, configuration and API of the selected device — its documented use being zephyr,console and zephyr,shell-uart switching — an attacker can suppress console, log and shell output, redirect that output to a downstream device it is able to observe, or flip the selection underneath another thread that is legitimately using the multiplexer. The impact is bounded to the devicetree-fixed set of downstream devices; no out-of-bounds access or arbitrary pointer dereference is reachable. The fix declares __subsystem struct devmux_driver_api and attaches a DEVICE_API(devmux, devmux_api) instance to each devmux device so that it becomes a tracked K_OBJ_DRIVER_DEVMUX kernel object, and adds K_OOPS(devmux_inst_get(dev) == SIZE_MAX) plus K_OOPS(k_object_access_check(dev) != 0) to both verifiers.

HarnessRouter

A vulnerability was detected in HarnessRouter up to 0.31.10. This affects an unknown function of the file gateway/app.py of the component Identity Mode. Performing a manipulation of the argument X-Harness-Org/X-Harness-Member results in improper authorization. The attack is possible to be carried out remotely. The attack is considered to have high complexity. The exploitability is reported as difficult. Upgrading to version 0.31.11 mitigates this issue. The patch is named 48a26cdf9c4544d2c88d1a07f0777f063f1d753f. The affected component should be upgraded.

ProjectWorlds Advanced Library Management System

A security vulnerability has been detected in ProjectWorlds Advanced Library Management System 1.0. This impacts the function mysqli_query of the file profile.php. The manipulation of the argument admin_id leads to sql injection. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used.

Checkmk GmbH Checkmk

Local privilege escalation in Checkmk 2.5.0p14 allows a local user with write access to the Oracle client library directory of an Oracle home listed in the 'oratab' file or to the 'oratab' file itself to execute code as root if an agent has the 'mk-oracle' plugin enabled.

Tailored Media Tailored Tools

Cross-Site Request Forgery (CSRF) vulnerability in Tailored Media Tailored Tools tailored-tools allows Cross Site Request Forgery.This issue affects Tailored Tools: from n/a through 3.0.3.

Apache Software Foundation Apache Pulsar

The Pulsar Functions worker REST API provides two endpoints that return the catalog of Pulsar IO connectors installed on the functions worker: the worker connectors endpoint (/admin/v2/worker/connectors) and the deprecated functions connectors endpoint (/admin/v2/functions/connectors and /admin/v3/functions/connectors). When authorization is enabled, the worker connectors endpoint requires super-user access. The functions connectors endpoint, served both by the functions worker and by a broker running the functions worker, returns the same catalog without this check. As a result, when authentication and authorization are enabled, any authenticated client can read the connector catalog through the functions connectors endpoint, regardless of the permissions granted to its role and without super-user access. Unauthenticated requests are rejected unless anonymous access is configured with an anonymous user role. The catalog contains the connector type definitions installed in the functions worker's connectors directory: the connector name, its description, and the source, sink and configuration class names. It does not contain configured source or sink instances, their configuration values or credentials, and an installed connector type does not indicate that a connector is configured or running. The impact is limited to disclosure of this metadata, which can include the names and descriptions of custom connectors installed by the operator. The issue does not allow modifying the catalog or managing connectors. Connector definitions that have a source or sink class are also returned by the built-in sources and sinks endpoints to authenticated clients. In fixed versions, the functions connectors endpoint applies the same checks as the worker connectors endpoint, so that it requires super-user access when authorization is enabled. Clients that are not super-users can use the built-in sources and sinks endpoints to list the available connector types. This issue affects Apache Pulsar versions from 2.4.1 before 4.0.14 and from 4.1.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.

Apache Software Foundation Apache Pulsar

The Pulsar Functions Worker provides a REST API endpoint for triggering a function, which publishes a caller-supplied value to one of the function's configured input topics. The Functions Worker performs this publish with its own broker client, which authenticates with the Worker's configured broker-client credentials rather than the credentials of the API caller. When authorization is enabled, in Apache Pulsar 2.4.0 and later versions, the trigger endpoint checks only that the caller is authorized to perform function operations in the function's namespace. It does not check that the caller is authorized to produce to the input topic that the message is published to. Versions before 2.4.0 do not perform a caller authorization check for the trigger endpoint at all. Function input topics are not restricted to the function's own tenant or namespace, and registering a function does not require produce permission on its input topics. As a result, an authenticated user who is authorized to manage functions in a namespace, for example a role granted the functions permission on that namespace, can cause the Functions Worker to publish messages with caller-controlled content to a topic that the user is not authorized to produce to, including topics in other tenants. These messages are published under the identity of the Functions Worker. The issue does not require any function instance to be running or any function code to be executed. It requires that the Functions Worker's broker-client identity is itself authorized to produce to the target topic and, in Apache Pulsar 2.3.0 and later versions, to list the subscriptions of the target topic, as is the case when that identity is a superuser. The impact is on the integrity of the data in the affected topics: consumers of those topics may receive messages from a user who is not permitted to publish them. This concerns the Functions Worker REST API as called by an external, authenticated client; it does not change the security model for function code, which must be fully trusted. In fixed versions, when authorization is enabled, triggering a function additionally requires the caller to be authorized to produce to the selected input topic before any message is published. This issue affects Apache Pulsar versions from 2.0.0-rc1-incubating before 4.0.14 and from 4.1.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. Users of Apache Pulsar 2.4.0 and later versions with authorization enabled who cannot upgrade immediately can limit the permission to manage functions to trusted roles. Users of versions before 2.4.0 should restrict access to the Functions Worker REST API to trusted callers, because in these versions the trigger endpoint does not check the caller's permission to manage functions.

BusyBox

BusyBox libarchive Symlink Directory Traversal Arbitrary File Creation Vulnerability. This vulnerability allows remote attackers to create arbitrary files on affected installations of BusyBox. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the libarchive component. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to create files in the context of the current user. Was ZDI-CAN-27556.

flipped-aurora gin-vue-admin

gin-vue-admin through 2.9.2 contains a path traversal vulnerability that allows authenticated administrators to recursively delete arbitrary directories by supplying traversal sequences in the pluginName parameter. Attackers can send a crafted POST request to /autoCode/removePlugin with '../' sequences, causing os.RemoveAll to delete any directory writable by the server process.

bpampuch pdfmake

pdfmake 0.3.8 before 0.3.12 fails to apply the setLocalAccessPolicy() restriction to images referenced inside SVG content, allowing attackers to read blocked local files. Attackers supplying a document definition can add an SVG image href pointing to a local path, embedding restricted file contents in the generated PDF.

ProjectWorlds Advanced Library Management System

A weakness has been identified in ProjectWorlds Advanced Library Management System 1.0. This affects the function mysqli_query of the file returned_book_search.php of the component Search Form. Executing a manipulation of the argument datefrom/dateto can lead to sql injection. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks.

ProjectWorlds Advanced Library Management System

A security flaw has been discovered in ProjectWorlds Advanced Library Management System 1.0. The impacted element is an unknown function of the file edit_member.php. Performing a manipulation of the argument firstname/middlename/lastname/address/branch/type results in sql injection. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks.

DigitalME eRoom

Missing Authorization vulnerability in DigitalME eRoom eroom-zoom-meetings-webinar allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects eRoom: from n/a through 1.7.1.

nuxt

Nuxt is an open-source web development framework for Vue.js. From 3.13.0 until 4.6.2, the server-island renderer serializes raw useHeadSafe entry input into the island response without preserving the safe-input marker, and NuxtIsland later inserts that input into the page head as an ordinary entry. An application that passes attacker-controlled data to useHeadSafe in a .server.vue component or page, or in a component rendered through NuxtIsland, can therefore render values normally removed by the allowlist, including event-handler attributes or executable script content, resulting in stored cross-site scripting in the application origin. This issue is fixed in version 4.6.2 .

nuxt

Nuxt is an open-source web development framework for Vue.js. Prior to 4.6.2, Nuxt resolves pages case-insensitively by default while Nitro matches server-side route-rule keys case-sensitively, allowing a request whose path differs only by letter case to render without the server rule intended for that page. The mismatch can skip redirect, headers, proxy, ssr: false, and noScripts, and can cause getRouteRules(event) and matchRouteRules to return no rule for the case variant. Applications that set router.options.sensitive: true in nuxt.config are not affected; setting sensitive only in app/router.options.ts does not establish this exclusion because the server follows the nuxt.config value. Access checks implemented in server middleware, page route middleware, or page data fetching remain independent of this matcher. This issue is fixed in version 4.6.2.

nuxt

Nuxt is an open-source web development framework for Vue.js. From 3.11.0 until 3.21.4 and 4.4.4, Nuxt compares route-rule keys with the raw request path while route resolution decodes dynamic and catch-all parameters, allowing a percent-encoded segment to resolve to a protected page without matching the routeRules entry intended for that path. As a result, appMiddleware can be skipped during server rendering and an unauthenticated requester can receive the gated page and its SSR data. The same mismatch affects app-manifest rules including redirect, appLayout, ssr, prerender, and payload flags derived from cache, isr, and swr. This vulnerability is fixed in 4.4.4 and 3.21.4.

uhop stream-json

stream-json is a micro-library of stream components for processing JSON and JSONC with a minimal memory footprint. From 2.0.0 until 3.7.0, FlexAssembler compiles string and regular-expression path filters into matchers that join the full key stack on every container start. Because the key stack grows with unbounded object or array nesting, a document nested to depth D causes D joins whose cost grows with the current depth, resulting in quadratic CPU consumption on the single-threaded event loop. The join occurs before the rule match decision, so the attacker does not need to know the target schema. Consumers using only function filters or no rules are not affected. A crafted nested document can stall all concurrent work in a process that feeds it to an affected FlexAssembler. This issue is fixed in 3.7.0, which adds a default maximum depth.

withastro astro

Astro is a web framework for content-driven websites. Prior to 7.3.2, Astro's JSX and MDX rendering pipeline treats string children of script and style elements as trusted HTML without distinguishing compiler-generated literal content from dynamic expression values. An application that passes attacker-controlled data directly as a dynamic child can allow a value containing a closing script or style tag to terminate the element and inject arbitrary HTML and JavaScript. Other JSX expression contexts escape dynamic strings automatically; the issue is limited to script and style children rendered through the astro:jsx renderer, including MDX components. Successful exploitation can produce reflected or stored cross-site scripting under the application's origin. This issue is fixed in 7.3.2.

H5P

Authorization Bypass Through User-Controlled Key vulnerability in H5P H5P h5p allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects H5P: from n/a through 1.17.9.

Apache Software Foundation Apache Pulsar

When package management is enabled, Pulsar Functions, Sources and Sinks can be registered or updated from a package stored in the Pulsar Packages Management Service by supplying a package URL. The Pulsar Functions worker authorized these requests only against the namespace in which the component was being registered or updated. It did not check whether the requesting user was permitted to access packages in the namespace that the package URL refers to, and it retrieved the package from the broker using the worker's own credentials. The permission check of the Packages Management Service was therefore applied to the worker's identity instead of the requesting user's. Package URLs of transform functions supplied when registering or updating a sink were handled in the same way. An authenticated user who is permitted to register or update functions, sources or sinks in any namespace of their own tenant could use this to obtain the contents of a package stored in a namespace of another tenant, without having the packages permission on that namespace. The impact is limited to disclosure of package contents, which may include application code, business logic or embedded credentials. The issue does not allow packages to be modified or deleted and does not affect availability. This issue only affects deployments that have authentication and authorization enabled and in which package management has been enabled: the broker setting enablePackagesManagement and, in current releases, the functions worker setting functionsWorkerEnablePackageManagement. Both settings are disabled by default. This issue affects Apache Pulsar versions from 2.8.0 before 4.0.14, from 4.1.0 through 4.1.3, and from 4.2.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.

Apache Software Foundation Apache Pulsar

The Pulsar broker serves two schema commands on its binary protocol: GetSchema, which returns the schema registered for a topic, and GetOrCreateSchema, which registers a new schema version for an existing topic. The broker handled both commands after checking only that the client connection was authenticated. Unlike the broker's other topic commands, such as those for creating producers and consumers or for looking up topics, these two commands did not check whether the authenticated client was authorized for the target topic. The Pulsar REST API endpoints for schemas were not affected. An authenticated client without any permission on the target topic, namespace or tenant could use these commands to: - read the schema registered for a topic in another namespace or tenant, disclosing the schema definition such as record field names and types. Message payloads are not disclosed. - register a new schema version on an existing topic in another namespace or tenant. The topic's schema compatibility and schema auto-update policies still apply. The issue does not allow message data to be read or modified, but a registered schema version can cause legitimate producers and consumers of that topic to fail with schema incompatibility errors until the schema is corrected by an administrator. The standard Pulsar client performs an authorized topic lookup before it sends these commands, so the missing check could not be observed when testing with the standard client. A client that implements the binary protocol directly is not required to perform that lookup first. This issue is relevant only to deployments that have authentication and authorization enabled. The GetSchema command is affected from Apache Pulsar 2.2.0, and the GetOrCreateSchema command from Apache Pulsar 2.5.0. After the fix, the broker requires the lookup permission on the topic for GetSchema and the produce permission on the topic for GetOrCreateSchema. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be slightly different. This issue affects Apache Pulsar versions from 2.2.0 before 4.0.14, from 4.1.0 through 4.1.3, and from 4.2.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.

Cisco TelePresence Video Communication Server (VCS) Expressway

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.   The vulnerabilities tracked by CVE-2026-76497 are related to issues concerning insecure temporary files that are grouped under the Common Weakness Enumeration (CWE) Base CWE-377.

Cisco Open Source Snort3 · Cisco Secure Firewall Threat Defense (FTD) Software

Multiple Cisco products are affected by a vulnerability in the memory management implementation of Snort 3 that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection. This vulnerability is due to incomplete error checking when Snort 3 processes files, which could cause unreleased memory. An attacker could exploit this vulnerability by sending a large number of files to be processed. A successful exploit could allow the attacker to cause the Snort 3 Detection Engine to restart unexpectedly, resulting in a DoS condition.

Cisco Unified Communications Manager

A vulnerability in Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an unauthenticated, remote attacker to conduct access control bypass attacks on an affected device. This vulnerability is due to improper input validation for specific HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to access parts of the network that are beyond the scope of their intended access.

Cisco Secure Client

A vulnerability in the interprocess communication (IPC) channel of the Secure Firewall Posture module in Cisco Secure Client could allow an authenticated, local attacker to elevate privileges on an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a series of crafted IPC messages to a local socket. A successful exploit could allow the attacker to perform limited file write operations on the filesystem with SYSTEM or root privileges. Although this vulnerability affects the Secure Firewall Posture module in Cisco Secure Client on Windows, macOS, and Linux operating systems, this vulnerability could be used to obtain full root privileges on macOS and Linux. For that reason Cisco has assigned this security advisory a Security Impact Rating (SIR) of High rather than Medium as the score indicates.

Cisco Open Source Snort3 · Cisco Secure Firewall Threat Defense (FTD) Software · Cisco UTD SNORT IPS Engine Software

Multiple Cisco products are affected by a vulnerability in the Snort 3 Detection Engine that could allow an unauthenticated, remote attacker to cause the detection engine to unexpectedly restart, resulting in a denial of service (DoS) condition. The vulnerability is due to a flaw in logic handling when General Packet Radio Service (GPRS) Tunneling Protocol (GTP) extension headers are processed within the codec. An attacker could exploit this vulnerability by sending a crafted, fragmented UDP datagram that contains these headers to the Snort 3 Detection Engine of an affected device. A successful exploit could allow the attacker to cause the detection engine to enter an infinite loop, resulting in a DoS condition.

Cisco TelePresence Video Communication Server (VCS) Expressway

A vulnerability in Cisco Expressway Series could allow an unauthenticated, remote attacker to obtain sensitive information from an affected device. This vulnerability is due to insufficient authorization checks of HTTP requests during Mobile and Remote Access (MRA) provisioning. An attacker could exploit this vulnerability by submitting a crafted URL request to an affected device. A successful exploit could allow the attacker to access sensitive information that they would otherwise not have authorization to access. Note: Cisco Expressway Series refers to Cisco Expressway Core (Expressway-C) devices and Cisco Expressway Edge (Expressway-E) devices.

Girafit camera app

Girafit camera app (Android and iOS) version 1.9.1 and earlier, and Girafit camera devices, contain a hardcoded credentials vulnerability that allows attackers to obtain the shared TURN relay username by decompiling the app or intercepting unencrypted network traffic during live view registration. Attackers can extract the static TURN username and session token, which are identical across all installs and not tied to any user or device, potentially enabling tracking, impersonation, or further exploitation if combined with the TURN relay password.

Cisco Cyber Vision · Cisco Open Source Snort3 · Cisco Secure Firewall Threat Defense (FTD) Software · Cisco Umbrella Insights Virtual Appliance

Multiple Cisco products are affected by a vulnerability in the generic routing encapsulation (GRE) tunnel decapsulation feature of the Snort 3 Detection Engine that could allow an unauthenticated, remote attacker to cause an unexpected restart of the Snort 3 Detection Engine. This vulnerability is due to improper handling of nested GRE traffic. An attacker could exploit this vulnerability by sending a crafted GRE payload through an affected device. A successful exploit could allow the attacker to trigger an unexpected reload of the Snort 3 Detection Engine, resulting in either a bypass or denial of service (DoS) condition, depending on device configuration. For more information, see the section of this advisory. The Snort 3 Detection Engine will restart automatically. No manual intervention is required.

Cisco Open Source Snort3 · Cisco Secure Firewall Threat Defense (FTD) Software · Cisco UTD SNORT IPS Engine Software

A vulnerability in the Snort 3 Visual Basic for Applications (VBA) Decompression Engine of multiple Cisco products could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to improper range checking when Snort 3 decompresses VBA data, which is user controlled. An attacker could exploit this vulnerability by sending crafted VBA data to the Snort 3 Detection Engine of a targeted device. A successful exploit could allow the attacker to cause an overflow of stack data, which could result in a DoS condition.

Cisco Open Source Snort3 · Cisco Secure Firewall Threat Defense (FTD) Software · Cisco UTD SNORT IPS Engine Software

Multiple Cisco products are affected by a vulnerability in the Snort 3 Teredo Detection Engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection. This vulnerability is due to incomplete error checking when Snort 3 parses Teredo packets. An attacker could exploit this vulnerability by sending a crafted Teredo packet to a targeted device to be parsed by Snort. A successful exploit could allow the attacker to cause the Snort 3 Detection Engine to restart unexpectedly, resulting in a DoS condition.

Cisco Open Source Snort3 · Cisco Secure Firewall Threat Defense (FTD) Software · Cisco UTD SNORT IPS Engine Software

Multiple Cisco products are affected by a vulnerability in the Snort 3 Generic Routing Encapsulation (GRE) Detection Engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection. This vulnerability is due to incomplete error checking when Snort 3 parses GRE packets. An attacker could exploit this vulnerability by sending a crafted GRE packet to a targeted device to be parsed by Snort. A successful exploit could allow the attacker to cause the Snort 3 Detection Engine to restart unexpectedly, resulting in a DoS condition.

Cisco Open Source Snort3 · Cisco Secure Firewall Threat Defense (FTD) Software · Cisco UTD SNORT IPS Engine Software

Multiple Cisco products are affected by a vulnerability in the Snort 3 NetFlow Detection Engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection. This vulnerability is due to incomplete error checking when Snort 3 parses UDP Netflow Protocol packets. An attacker could exploit this vulnerability by sending a single crafted Netflow packet through an established connection to be parsed by Snort 3. A successful exploit could allow the attacker to cause the Snort 3 Detection Engine to restart unexpectedly, resulting in a DoS condition.

Cisco Open Source Snort3 · Cisco Secure Firewall Threat Defense (FTD) Software · Cisco UTD SNORT IPS Engine Software

Multiple Cisco products are affected by a vulnerability in the Snort 3 SMTP MIME Decoder that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart. This vulnerability is due to a lack of error checking when the MIME fields of the SMTP header are parsed. An attacker could exploit this vulnerability by sending crafted SMTP packets through an established connection to be parsed by Snort 3. A successful exploit could allow the attacker to cause a denial of service (DoS) condition when the Snort 3 Detection Engine unexpectedly restarts.

oretnom23 file-management-system-php

A vulnerability has been found in oretnom23 file-management-system-php up to 2e3c1ebe60f121e8df4fb3f544f0e9591d9a01e4. This vulnerability affects the function delete_folder of the file ajax.php of the component AJAX Handler. The manipulation of the argument ID leads to missing authentication. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet.

electron

Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to versions 42.11.3, 43.7.0, 44.3.0, and 45.0.0-alpha.5, requests to open external protocol URLs could be attributed to a document other than the one that initiated them, causing the requestingUrl passed to session.setPermissionRequestHandler to identify trusted content for a launch requested by untrusted content. An application that grants openExternal based on the requesting origin and allows untrusted content to open or navigate windows could therefore allow that content to launch an OS-registered external application. This issue is fixed in versions 42.11.3, 43.7.0, 44.3.0, and 45.0.0-alpha.5.

electron

Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to versions 42.11.3, 43.7.0, 44.3.0, and 45.0.0-alpha.5, hid and usb permission checks made from an iframe caused setPermissionCheckHandler to receive the top-level frame's origin and details instead of the requesting frame's. An application that delegated hid or usb to a cross-origin untrusted iframe and allowed device access with origin-based logic could therefore grant that embedded frame access intended for the top-level page. This issue is fixed in versions 42.11.3, 43.7.0, 44.3.0, and 45.0.0-alpha.5.

abdolence slack-morphism-rust

Slack Morphism is a client library for Slack Web/Events API/Socket Mode and Block Kit. Versions 1.0.0 through 2.27.0 expose the correct Slack request HMAC when signature verification fails. For an invalid request, `slack-morphism` computes the correct signature for the attacker-controlled timestamp and request body and stores it in `SlackEventWrongSignatureError.generated_hash`. The error's `Debug` and `Display` representations expose that value, and the default Axum listener error handler logs it at error level. An attacker who can both reach the application's Slack callback endpoint and read its application/service logs can therefore use the verifier as a chosen-message HMAC oracle. The attacker can send an arbitrary request with an invalid signature, recover the correct signature from the resulting log entry, and resend the same request within the five-minute freshness window. The second request passes Slack Morphism's signature verification and reaches the protected application callback without the attacker knowing the Slack signing secret. Version 2.28.0 patches the issue.

electron

Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to versions 42.11.9, 43.7.6, 44.5.0, and 45.0.0-alpha.13, pointerLock permission requests from some cross-origin iframes caused session.setPermissionRequestHandler() to receive the top-level frame's requestingUrl and isMainFrame values instead of those of the requesting frame. An application that embeds untrusted iframe content and grants pointer lock based on the requesting origin could therefore grant the permission under the top-level page's identity. Applications that deny pointerLock for untrusted embedded content are not affected. This issue is fixed in versions 42.11.9, 43.7.6, 44.5.0, and 45.0.0-alpha.13.

electron

Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to versions 42.11.3, 43.7.0, 44.3.0, and 45.0.0-alpha.6, Electron treated pages opened into a new window from links as application-initiated navigations instead of preserving the page containing the link as the initiator. The resulting top-level request could be classified as same-site, causing SameSite=Strict cookies to be sent and Sec-Fetch-Site not to identify the initiating page. An application that loads untrusted content and permits it to open new windows could therefore allow that content to make a credentialed request to another site that relies on SameSite cookies for CSRF protection. This issue is fixed in versions 42.11.3, 43.7.0, 44.3.0, and 45.0.0-alpha.6.

Progressive Robot Ltd hMailServer

Not failing securely in the anti-virus attachment-stripping action of Progressive Robot hMailServer 6.0.0 through 6.3.6 allows a remote unauthenticated attacker to have a message that the server's virus scanner found infected delivered to the recipient's mailbox unchanged. With virus scanning enabled and its action set to remove attachments and deliver the text (the default action deletes the message), the server keeps one text part of an infected message and replaces every attachment with a note. A message whose single part is not text - a program or an archive sent as the whole message, a message carried whole, a file declared an attachment, or an S/MIME message signed as one part, whose content the recipient's mail client opens - had no part the action could pick out, and was delivered as it arrived, with the content the scanner had found and nothing but a line in the application log to show it. Any sender can write such a message.

Progressive Robot Ltd hMailServer

Insufficient preservation of the original sender in the forwarding of Progressive Robot hMailServer 6.0.0 through 6.3.6 allows a remote unauthenticated attacker to have mail they write, naming in its From an address at a domain the server hosts, delivered to other receivers as passing that domain's DMARC policy. When the server sent on a copy of mail that came from outside - an account's forward, a mail rule's forward, a Sieve redirect, a list's copy, or an alias or list expanding to an outside address - it could give the copy an SMTP identity in the organisation of the domain the copy's From names, whatever the message's origin: with the Sender Rewriting Scheme or the rewrite of the envelope sender on forwarding enabled (both off by default), an address at the forwarding domain; for a list, its bounce address; for a message with an empty envelope sender, none, under the server's own host name; and an envelope sender the message came with at a subdomain of a hosted domain was kept. Where that identity's SPF record authorises the server, other receivers' SPF check of the copy passed for a domain aligned with the From, and DMARC passed with it, although the message had not passed DMARC when the server received it. Exploitation needs a forward, redirect, alias or list that carries the hosted domain's mail to an outside address, and one of: SRS or the envelope rewrite enabled; a list whose bounce address is in the domain's organisation; an envelope sender at a subdomain whose SPF record authorises the server; or, for an empty envelope sender, an SPF record that authorises the server under its host name. The DKIM route to the same result is CVE-2026-107567.

Progressive Robot Ltd hMailServer

Missing authorization in the REST metrics route of Progressive Robot hMailServer 6.2.25 through 6.3.6 allows a remote authenticated user whose credential is confined to named domains to read the server-wide traffic history. GET /api/v1/metrics/history returns the server's traffic counters over the last 30 days; those counters are server-wide and carry no domain, which is why the report routes already refuse the same counters to a credential confined to named domains. The metrics route was not among the routes the server's authorization gate refuses a confined credential and its handler was not given the caller, so a domain administrator, an account given another role that holds view_configuration in named domains (the auditor role given a domain list among them), or an API key issued for named domains could read the whole server's traffic totals rather than its own domains'. The disclosure is of aggregate operational counters, not of any message or account.

Progressive Robot Ltd hMailServer

Missing authorization in the REST role-management routes of Progressive Robot hMailServer 6.3.4 through 6.3.6 allows a remote authenticated user whose credential is confined to named domains to modify a custom role that accounts in other domains hold, and to create custom roles and delete any that no account holds. The routes that create, update and delete a custom role require the manage_roles permission, which only the serveradmin role holds; but a full-scope API key issued for named domains, and serveradmin assigned with a domain list, are serveradmin confined to those domains and hold manage_roles. The server's authorization gate did not refuse the three role routes to a confined credential and the route named no domain, so a credential issued to one tenant could raise or lower the permissions of a custom role assigned across other tenants - granting another domain's role every permission over its mailboxes and settings, or removing what it needs. A custom role may not hold administer_server, administer_domain or manage_roles, so the confined credential cannot make itself or another a server administrator by creating or rewriting a custom role.

Progressive Robot Ltd hMailServer

Use of a less trusted source for the envelope sender in the external-account download of Progressive Robot hMailServer 6.0.0 through 6.3.6 allows a remote unauthenticated attacker to have mail they write in the name of a domain the server hosts sent on by the server with an envelope sender at that domain, so that it passes the domain's SPF and DMARC at other receivers. A message the server downloads from an external POP3 or IMAP account has no SMTP envelope of its own, and the server took the address in its From header as its envelope sender, whatever that address was. A forward or redirect of the downloaded message to an outside address then left with that address as its envelope sender, which the Sender Rewriting Scheme leaves alone for a hosted domain, so that the receiver's SPF check passed for the forged domain, aligned even under strict alignment, with no non-default setting, host name record or DMARC policy needed. An attacker needs to know a mailbox elsewhere that an account here collects and forwards to an outside address; an account holder who adds an external account of their own can collect from a server of their own, which matters where SmtpAuthenticatedSenderCheck holds signed-in senders to their own addresses.

Progressive Robot Ltd hMailServer

Incorrect authorization in the Sender Rewriting Scheme (SRS) of Progressive Robot hMailServer 6.2.1 through 6.3.6 allows a remote attacker to relay mail through the server to outside addresses. With SRS enabled, the server rewrites the envelope sender of mail it forwards to a signed SRS address at the forwarding domain, and passes a bounce to that address back to the original sender; but it took every message to a valid SRS address, whatever its sender, as delivery to a local recipient, so the relay rules and the SMTP authentication they require were not applied, and the message was delivered to the outside address the SRS address encodes. Anyone holding a valid SRS address of the server, such as the recipient of a forwarded message, could have the server relay mail to the address it encodes for 21 days, and an account holder whose account forwards to an outside mailbox could obtain one for any address. SRS is off by default.

Progressive Robot Ltd hMailServer

Insertion of sensitive information into a log file in the SMTP server of Progressive Robot hMailServer 6.0.0 through 6.3.6 allows a local user who can read the server's log, or anyone given a copy of it, to obtain credentials. With SMTP logging enabled, the server hid the credential of an AUTH PLAIN command only when it was sent after EHLO in one exact form, and wrote the rest of the SASL exchange as the client sent it: a PLAIN password sent before EHLO or with extra spacing, the OAuth 2.0 bearer token of AUTH XOAUTH2 and AUTH OAUTHBEARER (from 6.2.0), the SCRAM-SHA-256 client proof (from 6.2.0), which with the logged salt and iteration count allows offline password guessing, and the GSSAPI authenticator (from 6.3.2). SMTP logging is off by default; on Windows before 6.3.6 the log folder was readable by every local user.

Progressive Robot Ltd hMailServer

Cross-site request forgery in the REST API of Progressive Robot hMailServer 6.0.0 through 6.3.6 allows a remote attacker to make an authenticated user's browser perform a state-changing request. The REST API accepts HTTP Basic authentication and answers a browser with a Basic sign-in box; a browser caches the credential once the box is answered and sends it with later requests to that origin, including a top-level form post from another site, and the server reads a request body whatever its declared content type. The cross-site protection covered only the cookie session (a header a cross-site form cannot set, and a SameSite=Strict cookie); HTTP Basic was not held to it. A page under an attacker's control, visited by a user whose browser holds a cached Basic credential for the REST API - typically an administrator who signed in through the box - could therefore cause a state-changing request such as creating a domain, an account or an API key, or changing a setting, with the victim's credential. The attacker cannot read the cross-origin response, so the forgery is blind.

Velneo vServer

Improper link resolution before file access ('link following') vulnerability in Velneo vServer. This issue affects vServer: from 32.3 before 36.6 and from 37.1 before 37.2.

oretnom23 file-management-system-php

A vulnerability was determined in oretnom23 file-management-system-php up to 2e3c1ebe60f121e8df4fb3f544f0e9591d9a01e4. The impacted element is the function include of the file index.php. Executing a manipulation of the argument page can lead to file inclusion. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. The project was informed of the problem early through an issue report but has not responded yet.

py-pdf pypdf

pypdf is a free and open-source pure-python PDF library. Prior to 6.20.0, accessing a crafted PDF stream with a large number of filters or multiple filters that pass around large amounts of data can cause large memory consumption. This issue is fixed in version 6.20.0.

py-pdf pypdf

pypdf is a free and open-source pure-python PDF library. Prior to 6.20.0, an attacker can craft an incomplete PDF that ends inside a standard cross-reference table, causing pypdf to mishandle the unexpected end of file and enter an infinite loop. This issue is fixed in version 6.20.0.

py-pdf pypdf

pypdf is a free and open-source pure-python PDF library. Prior to 6.20.1, removing an object from a crafted cyclic PDF tree, such as an outline item, can enter an infinite loop and block the current process. This issue is fixed in version 6.20.1.

py-pdf pypdf

pypdf is a free and open-source pure-python PDF library. Prior to 6.20.1, calling PdfWriter.find_outline_item on a crafted PDF with a cyclic outline hierarchy can enter an infinite loop and block the current process. This issue is fixed in version 6.20.1.

py-pdf pypdf

pypdf is a free and open-source pure-python PDF library. Prior to 6.21.0, an attacker can craft a PDF containing a content stream with many small operations, causing parsing to consume large amounts of memory. This issue is fixed in version 6.21.0.