Dimanche 18 octobre 2026

Gitea

Gitea resolved the principals of an SSH certificate by searching the content of all stored public keys instead of only principal keys. When Gitea trusts a user certificate authority (`SSH_TRUSTED_USER_CA_KEYS`) and accepts arbitrary principals (`SSH_AUTHORIZED_PRINCIPALS_ALLOW=anything`), a user could register another user's public key line as their own principal, or a holder of a certificate signed by that authority could list it, and then authenticate as the owner of that key through the HTTP signature API and the built-in SSH server. Instances that do not trust a user certificate authority are not affected.

Linux

In the Linux kernel, the following vulnerability has been resolved: llc: fix skb UAF and leaks on llc_mac_hdr_init() failure In llc_conn_ac_resend_i_xxx_x_set_0_or_send_rr(), if llc_mac_hdr_init() fails, kfree_skb(skb) is called instead of kfree_skb(nskb). This leaks the newly allocated nskb, reads from the freed skb via LLC_I_GET_NR(pdu), and double-frees skb when llc_conn_state_process() drops its reference. In llc_sap_action_send_xid_r() and llc_sap_action_send_test_r(), nskb is leaked if llc_mac_hdr_init() returns an error. Free nskb in all three error paths.

Linux

In the Linux kernel, the following vulnerability has been resolved: tipc: reject invalid and unexpected GRP_ACK_MSG to prevent bc_ackers underflow Commit 48a5fe38772b ("tipc: fix bc_ackers underflow on duplicate GRP_ACK_MSG") rejected duplicate/stale ACKs in tipc_group_proto_rcv() by returning early when less_eq(acked, m->bc_acked). However, that check remains incomplete in two ways: 1. When grp->bc_ackers is zero (e.g. on a quiet group, when replicast ACKs were not requested, or after all expected members have already acknowledged), an unexpected GRP_ACK_MSG with acked > m->bc_acked passes less_eq() and unconditionally decrements grp->bc_ackers. Because bc_ackers is a u16, this wraps to 65535, causing tipc_group_bc_cong() to permanently report congestion and blocking all future group broadcasts on the socket. 2. During an active broadcast round (grp->bc_ackers > 0), the sender transmits packet S and advances grp->bc_snd_nxt to S + 1. Receivers increment their expected counter to S + 1 upon consuming packet S, so the only valid ACK value for the current round is strictly acked == grp->bc_snd_nxt. However, tipc_group_update_bc_members() initializes each member's m->bc_acked to prev = grp->bc_snd_nxt - 1 (S - 1 before increment). This leaves a 2-sequence gap (S - 1 to S + 1) in sequence space. An incoming ACK is therefore neither rejected as duplicate nor prevented from decrementing grp->bc_ackers if an unexpected or stale value (such as S) is received. A member sending acked = S followed by acked = S + 1 could decrement grp->bc_ackers twice in the same round, prematurely clearing bc_ackers or underflowing it. Fix this by: - Dropping GRP_ACK_MSG immediately if grp->bc_ackers is zero. - Requiring acked == grp->bc_snd_nxt and rejecting duplicates where m->bc_acked == acked. Because replicast broadcast rounds are strictly sequential, only grp->bc_snd_nxt can be acknowledged, and each member can acknowledge at most once per round. Note that a related pre-existing issue in tipc_group_delete_member() (where grp->bc_ackers decrementing to zero upon member departure does not restore *grp->open or trigger a socket wakeup) will be addressed in a separate patch.

Linux

In the Linux kernel, the following vulnerability has been resolved: bpf: fs/xattr: don't assume the inode is locked in path_unlink/path_rmdir bpf_lsm_has_d_inode_locked() makes the verifier rewrite bpf_[set|remove]_dentry_xattr() to the _locked variants, which assume that the caller already holds the inode's i_rwsem. The path_unlink and path_rmdir hooks are listed, but security_path_unlink() and security_path_rmdir() run before vfs_unlink()/vfs_rmdir() take the victim inode's i_rwsem, so a sleepable BPF LSM program attached to either hook mutates the victim's xattrs without the lock held. Drop the two path hooks from d_inode_locked_hooks so that the verifier keeps the locking bpf_[set|remove]_dentry_xattr() variants, which take the lock themselves.

Linux

In the Linux kernel, the following vulnerability has been resolved: ipv6: do not let ipv6_find_hdr() return an offset past the packet end ipv6_find_hdr() walks the extension header chain, skipping each header by the length that header itself declares. ipv6_optlen() returns up to 2048, and the skip is never checked against skb->len, so the offset stored in *offset can point past the end of the packet. openvswitch installs that offset as the transport header, and update_ipv6_checksum() then reads and writes the transport checksum field out of bounds: BUG: KASAN: slab-use-after-free in inet_proto_csum_replace16+0x445/0x470 Read of size 2 at addr ffff88810b754b06 by task ovs_ipv6_oob/629 CPU: 4 UID: 1000 PID: 629 Comm: ovs_ipv6_oob Tainted: G N 7.3.0-rc3+ #348 Call Trace: inet_proto_csum_replace16+0x445/0x470 set_ipv6_addr+0x3dd/0x460 do_execute_actions+0x6a3d/0x7c40 ovs_execute_actions+0xfd/0x480 ovs_packet_cmd_execute+0xc38/0xf20 genl_rcv_msg+0x59e/0x870 netlink_rcv_skb+0x18b/0x450 genl_rcv+0x2d/0x40 netlink_unicast+0x6bc/0xa20 The buggy address belongs to the object at ffff88810b754980 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 390 bytes inside of freed 704-byte region [ffff88810b754980, ffff88810b754c40) Other callers use that offset too, so bound it here rather than in one caller. Reject a header whose declared length does not fit in the packet. ipv6_find_hdr() already fails with -EBADMSG on a malformed chain, so this adds no new failure mode.

Linux

In the Linux kernel, the following vulnerability has been resolved: rds: ib: Clear the sg list when mapping an MR fails rds_ib_map_frmr() stores the caller's scatterlist in the MR before DMA mapping and registration can fail. On failure, __rds_rdma_map() unpins the pages and frees the scatterlist, but rds_ib_free_frmr() can still return the MR to the pool with the stale pointer set. This leaves the pool with a dangling scatterlist and can lead to local privilege escalation. KASAN detects the resulting use-after-free when the MR is later torn down: BUG: KASAN: slab-use-after-free in __rds_ib_teardown_mr Read of size 8 Call Trace: __rds_ib_teardown_mr rds_ib_unreg_frmr rds_ib_flush_mr_pool rds_ib_flush_mrs rds_free_mr rds_setsockopt Store the scatterlist in the MR only after DMA mapping succeeds. If DMA mapping fails, return directly while the MR fields remain clear; the caller keeps ownership of the scatterlist and its pinned pages. If a later registration step fails, unmap the scatterlist and clear the MR fields before returning.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix use-after-free and multi-container gap in kfd_dev_mapping kfd_dev_mapping caches the address_space of the first /dev/kfd opener so that the GPU reset path can call unmap_mapping_range() to zap all userspace mappings of doorbell and MMIO ranges. This design has two bugs that both manifest under SRIOV with multiple containers: 1. Use-after-free / rwsem deadlock. The cached pointer refers to an inode owned by the first opener's container. When that container exits and its inode is released, kfd_dev_mapping becomes a dangling pointer. A subsequent GPU reset dereferences it inside unmap_mapping_range(), which takes i_mmap_rwsem on the freed inode, causing a hard hang observable as an uninterruptible rwsem wait. 2. Multi-container gap. Only the first opener's address_space is cached; VMAs created by later openers live in a different address_space and are never reached by unmap_mapping_range(). After a GPU reset those stale mappings keep doorbell and MMIO pages accessible to guest userspace with no GPU behind them, risking PCIe transaction timeouts and NMI panics. Fix both bugs with the same approach used by DRM core (drm_drv.c): create a private pseudo-filesystem at module init time and allocate one anonymous inode from it. In kfd_open() redirect every opener's file->f_mapping to that inode's address_space. The inode is module-owned, lives exactly as long as the amdgpu module, and collects VMAs from all openers in one address_space. A single unmap_mapping_range() call in the reset path then correctly reaches every container's mappings with no dangling pointer risk. The hang manifests as an NMI backtrace on the GPU reset workqueue stuck spinning in rwsem_down_read_slowpath() with a corrupted i_mmap_rwsem: Workqueue: amdgpu-reset-dev xgpu_ai_mailbox_flr_work [amdgpu] Call Trace: <TASK> kvm_wait+0x1f/0x40 __pv_queued_spin_lock_slowpath+0x31d/0x3a0 _raw_spin_lock_irq+0x51/0x80 rwsem_down_read_slowpath+0xb3/0x550 down_read+0x48/0xd0 unmap_mapping_range+0x71/0x140 kfd_dev_unmap_mapping_range+0x5b/0x140 [amdgpu] amdgpu_amdkfd_clear_kfd_mapping+0xd8/0x190 [amdgpu] amdgpu_device_gpu_recover+0x232/0x450 [amdgpu] xgpu_ai_mailbox_flr_work+0xb5/0xc0 [amdgpu] process_one_work+0x18e/0x3e0 worker_thread+0x2e3/0x420 kthread+0x10a/0x230 (cherry picked from commit 1128b4a52de1572e87431de837fd9850cb99542c)

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/dmem: pin VRAM for the whole registered range Commit c32287471077 ("gpu/drm/nouveau: enable THP support for GPU memory migration") grew the device-private region that nouveau_dmem_chunk_alloc() registers from DMEM_CHUNK_SIZE to DMEM_CHUNK_SIZE * NR_CHUNKS, but left the VRAM buffer object backing that region at DMEM_CHUNK_SIZE. nouveau_dmem_page_addr() returns chunk->bo->offset plus the page's offset within the registered region, so every page past the first chunk resolves to VRAM outside the buffer object. Size the buffer object to the region it backs.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/uvmm: fix UAF in nouveau_uvmm_sm when BO is in TTM_PL_SYSTEM nouveau_uvmm_sm() calls op_map(), which passes bo->resource through nouveau_mem() to nouveau_uvma_map(). nouveau_uvmm_vmm_map() then reads mem->mem.type. But this is only valid when bo->resource is backed by struct nouveau_mem, as is the case for VRAM and TT resources. If the BO is left in TTM_PL_SYSTEM, bo->resource is only a struct ttm_resource. Treating it as struct nouveau_mem makes the mem->mem.type read past the end of the resource, causing a KASAN: slab-use-after-free Read in nouveau_uvmm_sm report: BUG: KASAN: slab-use-after-free in nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline] BUG: KASAN: slab-use-after-free in nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline] BUG: KASAN: slab-use-after-free in op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline] BUG: KASAN: slab-use-after-free in nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903 Read of size 1 at addr ffff888127d3e3a0 by task kworker/0:1/11 CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0 #5 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: nouveau_sched_wq_2224 drm_sched_run_job_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x95/0xe0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcb/0x5a0 mm/kasan/report.c:482 kasan_report+0xca/0x100 mm/kasan/report.c:595 nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline] nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline] op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline] nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903 nouveau_uvmm_sm_unmap drivers/gpu/drm/nouveau/nouveau_uvmm.c:932 [inline] nouveau_uvmm_bind_job_run+0xd6/0x250 drivers/gpu/drm/nouveau/nouveau_uvmm.c:1532 nouveau_job_run drivers/gpu/drm/nouveau/nouveau_sched.c:350 [inline] nouveau_sched_run_job+0x62/0xd0 drivers/gpu/drm/nouveau/nouveau_sched.c:364 drm_sched_run_job_work+0x356/0xa10 drivers/gpu/drm/scheduler/sched_main.c:1061 process_one_work+0x8a5/0x1900 kernel/workqueue.c:3322 process_scheduled_works kernel/workqueue.c:3405 [inline] worker_thread+0x5dd/0xd80 kernel/workqueue.c:3486 kthread+0x31d/0x420 kernel/kthread.c:436 ret_from_fork+0x662/0x940 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 2224 on cpu 0 at 66.550027s: kasan_save_stack+0x24/0x50 mm/kasan/common.c:57 kasan_save_track+0x17/0x60 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __do_kmalloc_node mm/slub.c:5334 [inline] __kmalloc_noprof+0x304/0x7c0 mm/slub.c:5359 _kmalloc_noprof include/linux/slab.h:992 [inline] dma_resv_list_alloc+0x27/0x90 drivers/dma-buf/dma-resv.c:106 dma_resv_reserve_fences+0x60e/0xa30 drivers/dma-buf/dma-resv.c:205 ttm_bo_alloc_resource+0x12c/0xbd0 drivers/gpu/drm/ttm/ttm_bo.c:721 ttm_bo_validate+0x1bc/0x4a0 drivers/gpu/drm/ttm/ttm_bo.c:856 ttm_bo_init_reserved+0x2c3/0x570 drivers/gpu/drm/ttm/ttm_bo.c:970 nouveau_bo_init+0x159/0x2c0 drivers/gpu/drm/nouveau/nouveau_bo.c:359 nouveau_gem_new+0x234/0x5f0 drivers/gpu/drm/nouveau/nouveau_gem.c:272 nouveau_gem_ioctl_new+0x1eb/0x420 drivers/gpu/drm/nouveau/nouveau_gem.c:352 drm_ioctl_kernel+0x192/0x350 drivers/gpu/drm/drm_ioctl.c:817 drm_ioctl+0x4f8/0xb40 drivers/gpu/drm/drm_ioctl.c:914 nouveau_drm_ioctl+0xea/0x2c0 drivers/gpu/drm/nouveau/nouveau_drm.c:1338 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x180/0x1d0 fs/ioctl.c:583 do_syscall_x64 ar ---truncated---

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix double-free in nvif_vmm_dtor On failure, nouveau_cli_init() calls nouveau_cli_fini() to tear the client down. Then, nouveau_drm_open() also enters into its cleanup path and calls nouveau_cli_fini() AGAIN. nouveau_cli_fini() calls nouveau_vmm_fini(): void nouveau_vmm_fini(struct nouveau_vmm *vmm) { nouveau_svmm_fini(&vmm->svmm); nvif_vmm_dtor(&vmm->vmm); vmm->cli = NULL; } Inside nvif_vmm_dtor(), vmm->page is freed unconditionally: void nvif_vmm_dtor(struct nvif_vmm *vmm) { kfree(vmm->page); nvif_object_dtor(&vmm->object); } vmm->page is never cleared after being freed, so the second call of nvif_vmm_dtor() will cause a double-free. Found by fuzzing the nouveau driver with a modified Syzkaller: BUG: KASAN: double-free in nvif_vmm_dtor+0x31/0x50 drivers/gpu/drm/nouveau/nvif/vmm.c:194 Free of addr ffff888010fcdc30 by task syz.0.173/2567 CPU: 1 UID: 0 PID: 2567 Comm: syz.0.173 Not tainted 7.2.0 #24 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x95/0xe0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcb/0x5a0 mm/kasan/report.c:482 kasan_report_invalid_free+0xaa/0xd0 mm/kasan/report.c:557 check_slab_allocation+0xe4/0x110 mm/kasan/common.c:235 kasan_slab_pre_free include/linux/kasan.h:199 [inline] slab_free_hook mm/slub.c:2622 [inline] slab_free mm/slub.c:6377 [inline] kfree+0x192/0x590 mm/slub.c:6692 nvif_vmm_dtor+0x31/0x50 drivers/gpu/drm/nouveau/nvif/vmm.c:194 nouveau_vmm_fini+0x16/0x50 drivers/gpu/drm/nouveau/nouveau_vmm.c:127 nouveau_cli_fini+0x10e/0x210 drivers/gpu/drm/nouveau/nouveau_drm.c:225 nouveau_drm_open+0x24e/0x740 drivers/gpu/drm/nouveau/nouveau_drm.c:1255 drm_file_alloc+0x5f2/0xad0 drivers/gpu/drm/drm_file.c:176 drm_open_helper+0x1d7/0x4a0 drivers/gpu/drm/drm_file.c:335 drm_open+0x190/0x3d0 drivers/gpu/drm/drm_file.c:388 drm_stub_open+0x1f2/0x460 drivers/gpu/drm/drm_drv.c:1211 chrdev_open+0x21c/0x660 fs/char_dev.c:411 do_dentry_open+0x59d/0x12b0 fs/open.c:947 vfs_open+0x82/0x390 fs/open.c:1052 do_open fs/namei.c:4700 [inline] path_openat+0x2345/0x3420 fs/namei.c:4863 do_file_open+0x207/0x460 fs/namei.c:4892 do_sys_openat2+0xd1/0x1d0 fs/open.c:1368 do_sys_open fs/open.c:1374 [inline] __do_sys_openat fs/open.c:1390 [inline] __se_sys_openat fs/open.c:1385 [inline] __x64_sys_openat+0x144/0x200 fs/open.c:1385 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x115/0x690 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fc6d687594d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fc6d5295008 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 00007fc6d6b06180 RCX: 00007fc6d687594d RDX: 0000000000022501 RSI: 0000200000000000 RDI: ffffffffffffff9c RBP: 00007fc6d691c303 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fc6d6b06218 R14: 00007fc6d6b06180 R15: 00007ffd9451d760 </TASK> Allocated by task 2567 on cpu 1 at 163.593900s: kasan_save_stack+0x24/0x50 mm/kasan/common.c:57 kasan_save_track+0x17/0x60 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __do_kmalloc_node mm/slub.c:5334 [inline] __kmalloc_noprof+0x304/0x7c0 mm/slub.c:5359 _kmalloc_noprof include/linux/slab.h:992 [inline] nvif_vmm_ctor+0x3c0/0x7e0 drivers/gpu/drm/nouveau/nvif/vmm.c:237 nouveau_vmm_init+0x40/0x90 drivers/gpu/drm/nouveau/nouveau_vmm.c:134 nouveau_cli_init+0x7b9/0 ---truncated---

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: RCU-free the scheduler-containing nouveau_sched struct nouveau_sched embeds a struct drm_gpu_scheduler (base). nouveau_sched_destroy() calls nouveau_sched_fini() (which does drm_sched_fini(&sched->base)) and then frees the object with plain kfree(sched). drm_sched_fence_get_timeline_name() returns fence->sched->name, and the scheduler fence keeps a .release callback so it is not ops-detached on signalling. A finished fence exported to userspace via drm_syncobj / sync_file therefore keeps pointing at &sched->base after nouveau_sched_destroy(), and a later get_timeline_name() -- reachable unprivileged through SYNC_IOC_FILE_INFO -- dereferences freed memory (KASAN slab-use-after-free read). Per the dma-fence lifetime contract the exporter must keep the data backing a signalled fence alive for an RCU grace period. Free the scheduler-containing object with kfree_rcu() instead of kfree().

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: nuke PTs only after unlinking contested VMAs In xe_vm_close_and_put(), external-BO VMAs are queued on the contested list for deferred destruction via xe_vma_destroy_unlocked(). However, xe_vm_pt_destroy() was previously invoked before processing contested VMAs, destroying vm->pt_root while those VMAs were still linked to their respective buffer objects (vm_bo->list.gpuva). If a concurrent thread evicts one of those shared buffer objects, xe_bo_trigger_rebind() holding only bo->resv walks the BO's VMAs and, in fault mode, calls xe_vm_invalidate_vma() -> xe_pt_zap_ptes(). Because vm->pt_root[tile->id] is already NULL, dereferencing pt->level causes a NULL ptr deref. Fix this by deferring xe_vm_free_scratch() and xe_vm_pt_destroy() until after all contested VMAs have been unlinked and destroyed. User is reporting hitting a NULL ptr deref in xe_pt_zap_ptes(), which could be explained by this race. (cherry picked from commit c2863648959489767f08892fd6e90577d2ea0b6a)

Linux

In the Linux kernel, the following vulnerability has been resolved: mm/rmap: fix missing barrier between anon_vma init and vma->anon_vma publish On arm64 server, we find that a task trying to grab the anon_vma lock triggers hungtask. INFO: task main:2354726 blocked for more than 120 seconds. Tainted: G E 5.10.0-0021.aarch64 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:main state:D stack: 0 pid:2354726 ppid:2350673 flags:0x00000a01 Call trace: __switch_to+0x7c/0xbc __schedule+0x3b4/0x8a0 schedule+0x50/0xe0 rwsem_down_write_slowpath+0x3cc/0x6cc down_write+0x60/0x260 __anon_vma_prepare+0x6c/0x210 do_anonymous_page+0x258/0x660 handle_pte_fault+0x188/0x214 __handle_mm_fault+0x1b0/0x380 handle_mm_fault+0xf4/0x284 do_page_fault+0x19c/0x494 do_translation_fault+0xcc/0xf8 do_mem_abort+0x48/0xac el0_da+0x44/0x80 el0_sync_handler+0x88/0xb4 el0_sync+0x160/0x180 After analyzing the vmcore, we found the anon_vma->root->rwsem.count is -1. There is another anon_vma whose anon_vma->root->rwsem.count is 1, the anon_vma->root->rwsem.owner shows the lock is held, but the stack of the task shows the task doesn't hold the anon_vma lock. After adding more debugging info, we found __anon_vma_prepare() reuses anon_vma and triggers the UAF of anon_vma->root due to missing memory barrier, leading to locking and unlocking two different anon_vma->root, thus leading to an anon_vma will never be unlocked, and another anon_vma couldn't be locked anymore. This race requires two adjacent VMAs that are not merged but are anon_vma-compatible (e.g., they differ in VMA_ACCESS_FLAGS that can be changed by mprotect()). Two threads fault on each VMA concurrently, both calling __anon_vma_prepare() with only mmap_lock held for reading. THREAD A THREAD B __anon_vma_prepare __anon_vma_prepare find_mergeable_anon_vma() -> NULL anon_vma = anon_vma_alloc(); anon_vma->root = anon_vma; // the two stores may be reordered vma->anon_vma = anon_vma; // finds A's anon_vma anon_vma = find_mergeable_anon_vma(vma); anon_vma_lock_write(anon_vma); // may still see the old root down_write(&anon_vma->root->rwsem); anon_vma_unlock_write(anon_vma); // see the new root, never unlock old up_write(&anon_vma->root->rwsem); thread A triggers page fault and calls __anon_vma_prepare() to prepare anon_vma for the faulting vma. __anon_vma_prepare() allocates and initializes a new anon_vma, and then publishes it to the vma with a plain store. anon_vma_prepare() only requires the mmap_lock to be held for reading, so two threads can fault on adjacent VMAs at the same time. While thread A publishes a new anon_vma, thread B could find the anon_vma via find_mergeable_anon_vma() and then locks anon_vma->root->rwsem. The store to anon_vma->root in anon_vma_alloc() and the store to vma->anon_vma can be reordered. The anon_vma_lock_write() and spin_lock() only provide acquire semantics, which do not prevent prior stores from being reordered after them. The release semantics of the corresponding spin_unlock() and anon_vma_unlock_write() come too late, the store to vma->anon_vma is already published before they take effect. As a result, thread B can observe the following order: vma->anon_vma = anon_vma; anon_vma->root = anon_vma; The anon_vma slab is SLAB_TYPESAFE_BY_RCU, so a newly allocated anon_vma may reuse memory from a previously freed one. The constructor (anon_vma_ctor) does not reset anon_vma->root, and __put_anon_vma() doesn't clear it either, so the old root value persists until anon_vma_alloc() overwrites it. If that store isn't v ---truncated---

Linux

In the Linux kernel, the following vulnerability has been resolved: HID: alps: fix use-after-free on input2 registration failure alps_input_configured() stores data->input2 before calling input_register_device(). If registration fails, input_free_device() frees the input device but data->input2 still points to the freed memory. alps_input_configured() calls hid_hw_open() before allocating input2, so URBs are already active and raw_event can fire during the failure window. A U1_SP_ABSOLUTE_REPORT_ID report arriving then causes u1_raw_event() to dereference the freed data->input2 -> use-after-free. Fix by only storing input2 into drvdata after successful registration and adding a NULL guard in the raw_event path.

Linux

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix OOB read in wacom_wac_pen_serial_enforce() The 'wacom_wac_pen_serial_enforce()' function may calculate and pass an invalid offset to hid_field_extract(), resulting in memory reads at incorrect addresses -- possibly beyond the end of the report. If a field in the HID descriptor lists more usages than its Report Count actually reserves space for, the function's inner 'j' will walk past the end of the field: for (i = 0; i < report->maxfield; i++) { for (j = 0; j < report->field[i]->maxusage; j++) { ... value = hid_field_extract(hdev, raw_data + 1, offset + j * size, size); A descriptor listing 12288 usages against Report Count 1 has the loop extract the usage at index 12287 from bit offset 98296 -- about 12 KB past a 2-byte received report. The value is stored in wacom_wac->serial[0] and can reach userspace as an MSC_SERIAL event, making this an information disclosure. Clamp the loop to field->report_count, the number of value slots the report holds. Value slots past the last declared usage are still scanned; they reuse that usage (HID 1.11, 6.2.2.8). Verified on v6.12.105 with a UHID reproducer: a 2-byte report from such a descriptor trips KASAN before the patch and not after it.

Linux

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: fix swapped IPv6 IPsec policy masks IPv6 XFRM policies may use different source and destination prefix lengths. mlx5e_ipsec_policy_mask() builds the corresponding masks independently, but setup_fte_addr6() installs each mask in the opposite address field. When the prefix lengths differ, this makes the source match use the destination prefix and the destination match use the source prefix. The resulting hardware rule can both miss traffic covered by the policy and match traffic outside it. Install each mask in its corresponding match field.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: conntrack: avoid modifying shared unconfirmed ct entry In a case where skb with an unconfirmed ct entry gets cloned, we may end up committing both but with different sets of extensions. The series of events: 1. The first clone wants to commit and runs the helpers wiring up the extension pointer into the expectation list. 2. Then it looses the confirmation keeping the entry unconfirmed. 3. Second clone now wants to commit labels and adds the new extension for that breaking the pointer in the expectation list causing UAF on the destruction path later. While this is possible to trigger, there should be no practical network pipeline where committing both clones without modifications into the same zone is needed. So, let's just reset the entry in case for some reason we got an skb with a shared one during commit. This doesn't affect any known use cases, but avoids any potential problems with sharing and modification of the unconfirmed ct entry. The fixes tag points to the introduction of helpers, since that's the main UAF trigger for the sharing.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: bridge: mdb: restart port group walk after deletion br_mdb_flush_pgs() keeps a pointer-to-pointer cursor while walking mp->ports. br_multicast_del_pg() can re-enter the same MDB entry through br_multicast_sg_del_exclude_ports() and unlink other port groups. If the cursor points into one of those groups, the next iteration dereferences a stale cursor and can leave mp->ports pointing at freed memory. A following RTM_GETMDB exposes the dangling pointer: BUG: KASAN: slab-use-after-free in br_mdb_dump Read of size 8 br_mdb_dump rtnl_mdb_dump rtnl_dumpit netlink_dump Reset the cursor to mp->ports after every deletion. The deletion removes at least the selected group, so the restarted walk always makes progress.

Linux

In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6t_rt: fix zero-address non-strict match out-of-bounds read rt_mt6_check() permits rules to be configured with rtinfo->addrnr == 0 even when address matching (IP6T_RT_FST_MASK) is requested. In the IP6T_RT_FST_NSTRICT path, rt_mt6() evaluates packet routing addresses against rtinfo->addrs[i] and terminates backwards at the bottom of the loop: if (ipv6_addr_equal(ap, &rtinfo->addrs[i])) { i++; } if (i == rtinfo->addrnr) break; When addrnr is 0, if the first packet address matches rtinfo->addrs[0], i is incremented to 1. Because i is now strictly greater than addrnr (0), the loop termination condition (i == rtinfo->addrnr) is bypassed and will never be satisfied. If a crafted IPv6 packet contains matching routing addresses, i will advance past IP6T_RT_HOPS (16). The subsequent call to ipv6_addr_equal() reads beyond struct ip6t_rt, triggering UBSAN/KASAN out-of-bounds warnings or kernel panics. Fix this by: 1. Rejecting rules in rt_mt6_check() where IP6T_RT_FST_MASK is set but rtinfo->addrnr is zero. 2. In rt_mt6(), moving the termination condition (i < rtinfo->addrnr) into the for-loop header condition and removing the backwards break at the end of the loop body.

Linux

In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi_tcp: Check the data direction of a Data-In PDU The Data-In branch of iscsi_tcp_hdr_dissect() resolves the ITT to a task and copies the PDU's data segment into that command's scatterlist without asking whether the command was reading. iscsi_tcp_r2t_rsp() in the same file does ask, and rejects an R2T for a command that is not DMA_TO_DEVICE. A target that answers a WRITE command's ITT with a Data-In therefore has the initiator write target-supplied bytes into the pages that write was about to send. Those are the caller's own pinned pages for an O_DIRECT write, and page cache pages for a buffered one. Observed against a test target that emits one 512-byte Data-In naming a 128 KB write's ITT, after the R2T for that write. With O_DIRECT the caller's buffer ends up holding 512 bytes of the target's data while pwrite() returns 131072. Buffered is quieter: pwrite() and fsync() both succeed, nothing is logged, and reading those blocks back returns the target's bytes out of the page cache without a command going on the wire. Check the direction before using the scatterlist, the way the R2T path already does.

Linux

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Do cache maintenance on the source VM during intra-host migration Manually perform cache maintenance on the source VM during intra-host migration to ensure no stale data is left in CPU caches after the VM is destroyed. Because the source VM is "converted" to a non-SEV VM, KVM's memory reclaim flows won't trigger cache maintenance, e.g. when all guest memory is reclaimed in response to detaching from the mmu_notifier. Note, relying on the destination VM to do cache maintenance isn't an option as KVM doesn't require identical guest memory configurations, i.e. the source VM may have access to memory that the destination VM does not. Enforcing equivalent memory configurations is infeasible, as it would require a *deep* comparison of memslots, e.g. to verify that not only are the memslot identical, but what the memslots point at is also identical.

Linux

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix AArch32 DBGBXVR<n> handling The consolidation of the breakpoint and watchpoint register accessors switched DBGBXVR<n> from trap_bvr() to trap_dbg_wb_reg(). The latter selects backing storage with demux_wb_reg(), which only handles Op2 values 4 through 7. Since DBGBXVR<n> uses Op2 1, an AArch32 guest access hits KVM_BUG_ON() and marks the VM dead. DBGBXVR<n> aliases DBGBVR<n>_EL1[63:32], and its AA32(HI) descriptor already selects the upper half. Map Op2 1 to dbg_bvr[] alongside Op2 4, restoring the pre-regression behavior.

Linux

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Transfer the hyp stack pages out of the host stage-2 fix_host_ownership() walks only the linear-map alias of each memblock region, and the per-CPU hyp stack, mapped in the private VA range for its guard page, has none. Walk each stack's VA range with the same walker.

Linux

In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Serialize IMSIC attributes with vCPU migration KVM device ioctls are not serialized against KVM_RUN. As a result, kvm_riscv_aia_imsic_rw_attr() can snapshot the physical CPU and HGEI of an IMSIC VS-file before a concurrent vCPU migration releases it. The HGEI can then be allocated to another vCPU before imsic_vsfile_rw() uses the stale tuple. A GET or SET attribute may consequently access the new owner's interrupt file. Serialize the entire IMSIC attribute operation with the target vCPU mutex. This prevents the VS-file from being migrated and recycled until the attribute access completes. Acquire the mutex killably so that the device ioctl remains interruptible while waiting for KVM_RUN to finish.

Linux

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: fix race in read_unconf_index_list() read_unconf_index_list() counts unconfigured controllers before allocating its response, then checks the device flags again while filling it. hci_dev_list_lock stabilizes list membership, but it does not serialize the per-device flags. During asynchronous controller setup, the worker can set HCI_UNCONFIGURED and clear HCI_SETUP between the two passes. A controller omitted from the allocation count can then become eligible for the fill pass, causing an out-of-bounds write to rp->index[]. Allocate space for every device on hci_dev_list. Since list membership cannot change while hci_dev_list_lock is held, the response remains large enough regardless of flag transitions. The reported count and response length still include only eligible unconfigured controllers.

Linux

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix create context out-of-bounds reads smb2_parse_contexts() validates the complete create-context area but does not limit each record to its Next field before dispatching it. A malformed chain can therefore expose bytes beyond the current context to a handler. The QFid handler also used a full response-structure cast although it only reads DiskFileId. The SMB2/SMB3 lease parsers made the same layout assumption: they read LeaseState and LeaseFlags at canonical offsets rather than at DataOffset. A valid non-canonical DataOffset could therefore yield unrelated in-bounds data, while a short DataLength was still accepted. Limit each context to its Next value, reject offsets before the context header, and reject malformed chains. Bound the name range by the current context and do not dispatch a known handler when DataLength is zero. Read the QFid DiskFileId only when the context data covers that field. Parse the lease context from DataOffset and require DataLength to match the v1 or v2 lease_context size used by ksmbd. A size mismatch skips lease parsing without failing the open.

Linux

In the Linux kernel, the following vulnerability has been resolved: smb: client: use finish_no_open() for non-regular inodes An O_CREAT open can find an existing symlink or another non-regular inode. cifs_atomic_open() calls finish_open() on it and attaches a cifsFileInfo. Symlink inodes have no CIFS release operation, so the dentry reference held by cifsFileInfo is leaked. FMODE_OPENED also prevents the VFS from following the symlink. Track whether cifs_do_create() returned an open server handle. For non-regular inodes, close the handle if present, remove the pending open, and call finish_no_open() so the VFS can continue the lookup. Do not set FMODE_CREATED unless a regular file was opened. For O_NOFOLLOW with __O_REGULAR, return -ELOOP before the VFS's -EFTYPE check. Defer closing a legacy POSIX handle on a non-regular inode until after inode lookup. This avoids closing it again if lookup fails.

Linux

In the Linux kernel, the following vulnerability has been resolved: xfs: fix cursor and pointer handling when recovering iunlink buckets LOLLM pointed out a bug in xlog_recover_iunlink_bucket: 1. We don't null out prev_ip after releasing it, which can lead to UAF problems if the inodegc flush call in the loop fails. at which point I noticed even more bugs: 2. If the inodegc flush inside the loop fails, we also leak @ip. 3. We set prev_agino to agino having already advanced agino, which results in inodes with i_prev_unlinked set to itself. 4. If we exit the bottom of the loop with prev_ip set, then prev_ip aliases ip and we also set its i_prev_unlinked to itself. Bugs 3 and 4 introduce loops into the unlinked list, though these loops don't surface because we immediately flush each unlinked inode after loading it. Fix all of these issues.

Linux

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: fix helper UAF due to extensions realloc While calling the helpers, a raw pointer to the extensions area is wired into expectations list: -> nf_ct_helper() -> helper->help() -> nf_ct_expect_related_report() -> nf_ct_expect_insert() -> hlist_add_head_rcu(&exp->lnode, &master_help->expectations) In case the connection is not confirmed yet, more extensions can be added afterwards with *_ext_add() calls reallocating the extension space and leaving the now invalid pointer in the expectations list that is later accessed while removing the expectation. Make sure that helpers are called at the end after all the other extensions are already added. Note that the helper rejection now leaves the mark and labels set, but that's not different from how the NAT was handled before or how the mark and the labels were handled on confirmation failure. And there are no atomicity guarantees provided by the API anyway.

Linux

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: avoid modifying shared unconfirmed ct entry In a case where skb with an unconfirmed ct entry gets cloned, we may end up processing both again but with different sets of extensions. The series of events: 1. The first clone wants to commit and runs the helpers wiring up the extension pointer into the expectation list. 2. Then it looses the confirmation keeping the entry unconfirmed. 3. Second clone now wants to commit labels or run NAT and adds the new extension for that breaking the pointer in the expectation list causing UAF on the destruction path later. While this is possible to trigger, there should be no practical network pipeline where we need to process both clones without modifications in the same zone. So, let's just reset the entry in case for some reason we got an skb with a shared one. This doesn't affect any known use cases, but avoids any potential problems with sharing and modification of the unconfirmed ct entry. Unlike openvswitch module, act_ct allows for NAT without commit. Changing that would be a uAPI break. So, act_ct needs to reset on NAT regardless of the commit flag to avoid reallocation of the extension space. This, however, doesn't really change the picture for sensible networking cases as there should be no need to run the same packet twice (before and after the clone) through conntrack without packet header or zone changes and without commit. The fixes tag points to the introduction of helpers, since that's the main UAF trigger for the sharing.

Linux

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Delay freeing of shadow S2 structures until VM destruction We free the shadow S2 structures from kvm_arch_flush_shadow_all(), which is a Bad Idea(tm). Freeing the page tables is fair game (this is what this callback is for), but freeing the container that could still be referenced by another part of the system is not great. Instead, grow separate destructors that gets called when we tear the VM down for good. From there, we can nuke both the individual MMUs as well as the global array that points to them, safe in the knowledge that the vcpus themselves have been destroyed already.

Linux

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Disable device buffer exporting Device buffers are never intended to be exported. Disable exporting support explicitly.

kishan0725 Hospital Management System

A weakness has been identified in kishan0725 Hospital Management System up to 777fda46b77a820977a5ba616283dbfbc40bf7e1. This affects the function mysqli_query of the file admin-panel.php of the component Appointment Cancellation Handler. Executing a manipulation of the argument ID can lead to sql injection. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.

JQ::Lite versions before 2.51 for Perl execute Perl code embedded in a query's regular expression by compiling it with string eval. The pattern given to test(), match(), or the match and =~ conditions of select() is placed in a `qr'...'` literal and compiled as source text, so a `(?{ ... })` code block in it runs without `use re 'eval'`. Single quotes in the pattern are escaped, but a code block runs in place and needs none. An attacker who supplies a query, or text that an application inserts into the pattern of one, can execute arbitrary Perl code in the calling process.

grunfink snac2

snac2 before 2.93 contains a heap-based buffer overflow vulnerability in _xs_json_load_lexer() that allows unauthenticated remote attackers to corrupt heap memory by sending JSON strings containing a \u0000 escape. Attackers can send a single crafted application/activity+json POST to activitypub_post_handler(), which parses it before signature checks, overflowing heap allocations and crashing the server.

jkuhlmann cgltf

cgltf through 1.15 contains a heap out-of-bounds write vulnerability in cgltf_accessor_unpack_floats() that allows attackers to write outside the output buffer via unchecked sparse accessor indices. Attackers can supply a crafted glTF or GLB file with large sparse indices to corrupt heap memory, crash applications, and potentially execute code when cgltf_validate() is not called.

omnigent-ai omnigent

Omnigent 0.3.0 before 0.14.0 contains a path traversal vulnerability that allows authenticated users to escape the workspace by setting os_env.cwd on nested sub-agents. Attackers can upload a bundle whose sub-agent uses an absolute or parent-traversing working directory, bypassing root-only validation in bundles.py, to read and write host files as the runner user.

clidey whodb

WhoDB 0.104.0 before 0.135.0 contains a path traversal vulnerability that allows remote attackers to read and write arbitrary host files by running DuckDB filesystem functions through the query editor. Attackers can log in to a DuckDB file without credentials and use read_text, read_blob, COPY ... TO or ATTACH to steal session.key and stored database credentials or overwrite files.

ProjectSend

ProjectSend 2.0.0 before 2.7.0 contains an incorrect authorization vulnerability that allows restricted API token holders to change the token owner's credentials via PATCH /api/v1/users/{user}. Attackers with a token limited to manage_users and edit_users can set a new owner password, clear two-factor authentication, and sign in interactively with the owner's full role permissions.

vanus-labs vanus

Vanus 0.8.0 through 0.9.0 contains a missing authorization vulnerability in the gateway that allows any authenticated user to call Subscribe, Ack, and unregistered methods without permission checks. Attackers can supply another tenant's subscription ID to Subscribe to hijack it, read and acknowledge its events, starve the legitimate consumer, and enumerate cluster users via ListUser.

vanus-labs vanus

Vanus 0.8.0 through 0.9.0 contains a missing authentication vulnerability that allows unauthenticated remote attackers to publish events to any eventbus through the gateway CloudEvents HTTP receiver. Attackers can send forged CloudEvents to the /namespaces/{ns}/eventbus/{name}/events or legacy /gateway/{name} paths, bypassing token authentication and authPublish checks, so they are stored and delivered to subscription sinks.

IdeaBox Creations PowerPack Lite for Beaver Builder

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in IdeaBox Creations PowerPack Lite for Beaver Builder powerpack-addon-for-beaver-builder allows Stored XSS.This issue affects PowerPack Lite for Beaver Builder: from n/a through 1.3.1.

DevItems Support Genix

Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in DevItems Support Genix support-genix-lite allows SQL Injection.This issue affects Support Genix: from n/a through 1.4.54.

WP E-Signature Electronic Signature Add-on for Fluent Forms

Authorization Bypass Through User-Controlled Key vulnerability in WP E-Signature Electronic Signature Add-on for Fluent Forms signature-fluent-contract-forms-add-on allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Electronic Signature Add-on for Fluent Forms: from n/a through 2.0.5.

NSquared Simply Schedule Appointments

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in NSquared Simply Schedule Appointments simply-schedule-appointments allows Stored XSS.This issue affects Simply Schedule Appointments: from n/a through 1.6.12.35.

Hamid Alinia Login with phone number

Incorrect Privilege Assignment vulnerability in Hamid Alinia Login with phone number login-with-phone-number allows Privilege Escalation.This issue affects Login with phone number: from n/a through 1.8.77.

Arraytics Booktics

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Arraytics Booktics booktics allows DOM-Based XSS.This issue affects Booktics: from n/a through 1.0.29.

ThemeGrill eStore

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in ThemeGrill eStore estore allows Reflected XSS.This issue affects eStore: from n/a through 1.6.13.

WP Chill Strong Testimonials

Deserialization of Untrusted Data vulnerability in WP Chill Strong Testimonials strong-testimonials allows Object Injection.This issue affects Strong Testimonials: from n/a through 3.3.12.

Unknown Modern Events Calendar Lite · Unknown Modern Event Calendar Pro

The Modern Events Calendar Lite WordPress plugin before 7.37.0, Modern Event Calendar Pro WordPress plugin before 7.37.0 does not sanitise and escape a parameter before using it in a SQL statement, allowing authenticated users with minimal privileges (Subscriber and above) to perform SQL injection attacks.

Unknown WP Photo Album Plus

The WP Photo Album Plus WordPress plugin before 9.2.11.002 does not properly escape a category navigation value before reflecting it into a JavaScript event handler on its gallery breadcrumb links, allowing unauthenticated attackers to inject arbitrary script that executes in the browser of anyone who follows a crafted gallery link and clicks the breadcrumb, including a logged-in administrator.

Unknown Salon Booking System

The Salon Booking System WordPress plugin before 10.31.11 does not prevent users holding its custom salon staff role from assigning arbitrary capabilities to other accounts when editing a customer, allowing them to escalate any account to administrator and take over the site.

itsmeravitejak Online-Examination-System

A vulnerability was detected in itsmeravitejak Online-Examination-System up to e6208e630b14657999bbfe4c9912302d2a1e2449. This impacts the function MySQLDB::topicslist of the file exammanger.php of the component AJAX Endpoint. The manipulation of the argument subject results in sql injection. The attack may be launched remotely. The exploit is now public and may be used. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. The project was informed of the problem early through an issue report but has not responded yet.

itsmeravitejak Online-Examination-System

A security vulnerability has been detected in itsmeravitejak Online-Examination-System up to e6208e630b14657999bbfe4c9912302d2a1e2449. This affects the function MySQLDB::valid/MySQLDB::getresults/MySQLDB::noresults/MySQLDB::getExams/MySQLDB::latestExamID/MySQLDB::getreport of the file results.php/include/database.php. The manipulation of the argument id/user/topic leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The project was informed of the problem early through an issue report but has not responded yet.

itsmeravitejak Online-Examination-System

A weakness has been identified in itsmeravitejak Online-Examination-System up to e6208e630b14657999bbfe4c9912302d2a1e2449. The impacted element is an unknown function of the file qsdb/usersdb/brandb/topicsdb/subjectsdb.php. Executing a manipulation of the argument query/qtype/sortname/sortorder can lead to sql injection. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The project was informed of the problem early through an issue report but has not responded yet.

nemoTyrant manong

A weakness has been identified in nemoTyrant manong up to 7c9e5228e133b9267ad3a415833bc9bb53193bb4. This impacts the function cache/del_cache/arr2sql of the file func.php. This manipulation causes sql injection. The attack may be initiated remotely. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The reported GitHub issue was closed with the reason "completed". However, it was not possible to determine the PR or commit which could have fixed this issue.