Semaine du 12 octobre au 18 octobre 2026

Linux

In the Linux kernel, the following vulnerability has been resolved: nfc: nfcmrvl: validate helper command length before pull The firmware download receive path removes the NCI data header and reads the helper command before validating the remaining packet length. A short frame can therefore reach the data access before the malformed packet is rejected. Validate the complete helper command length before stripping the NCI data header.

Linux

In the Linux kernel, the following vulnerability has been resolved: nfc: st21nfca: validate received frame size st21nfca_hci_i2c_repack() trims a received frame at its EOF marker before removing byte stuffing. It then assumes the truncated frame contains the LLC header and two CRC bytes, and it unconditionally reads the byte after an escape marker. A malformed frame can place EOF immediately after the start marker or can end its data portion with an escape marker. The former leaves too few bytes for check_crc(), while the latter makes the unstuffing loop read past the current skb length. Require the minimum framing bytes both before and after unstuffing. Use separate input and output cursors while removing byte stuffing, and reject an escape marker without its encoded byte. This keeps malformed frames within the received frame boundary before CRC processing.

Linux

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix list corruption / refcount desync in nfc_llcp_recv_dm() nfc_llcp_recv_dm() handles DM(NOBOUND)/DM(REJ) for a socket that is still linked on local->connecting_sockets: it looks the socket up with nfc_llcp_connecting_sock_get(), sets sk->sk_state = LLCP_CLOSED and returns, without taking the socket lock and without unlinking the socket from the connecting_sockets list. llcp_sock_release() selects the list to unlink from by sk_state: a socket in LLCP_CONNECTING is unlinked from connecting_sockets, otherwise from the sockets list. Because recv_dm left the socket physically on connecting_sockets but in the LLCP_CLOSED state, release() takes the else branch and calls nfc_llcp_sock_unlink(&local->sockets, sk). That runs sk_del_node_init() while holding sockets.lock, i.e. it removes the socket from the connecting_sockets hlist under the wrong lock. A concurrent connect() linking another socket onto connecting_sockets under connecting_sockets.lock then mutates the same hlist unserialized, which corrupts the list and desyncs the sk_add_node()/sk_del_node_init() sock_hold()/__sock_put() pairing. An unprivileged local process holding LLCP sockets, with the DM supplied by the remote peer over an established LLCP link, can drive this to leak kernel sockets without bound (the mis-decrement goes through the non-freeing __sock_put() path, so the object is never released), leading to memory exhaustion / DoS. This is the same class of bug that was fixed in the sibling handler nfc_llcp_recv_cc() by commit b493ea2765cc ("nfc: llcp: Fix use-after-free race in nfc_llcp_recv_cc()"); recv_dm did not receive the equivalent fix. Fix it the same way: take lock_sock(), re-check that the socket is still hashed (release() may have won the race), and for the NOBOUND/REJ case unlink it from connecting_sockets before moving it to LLCP_CLOSED. The unlink drops the connecting_sockets membership reference via sk_del_node_init(), leaving the socket unhashed, so the later nfc_llcp_sock_unlink() in llcp_sock_release() becomes a no-op and no double put occurs.

Linux

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix race condition in accept_queue lifecycle In nfc_llcp_socket_release(), sockets and listener accept queues are walked under the local sockets rwlock and bh_lock_sock(). However, bh_lock_sock() does not synchronise against process-context lock_sock() held by nfc_llcp_accept_dequeue() during accept(). Because socket_release() does not check sock_owned_by_user(), both paths can concurrently unlink and release the same child socket, resulting in use-after-free or a NULL pointer dereference of child->parent in nfc_llcp_accept_unlink(). Fix this synchronisation race by having nfc_llcp_socket_release() use process-context lock_sock() instead of bh_lock_sock(): 1. Pop sockets from the local sockets list under the write lock using nfc_llcp_sock_list_pop() so lock_sock() can be acquired without holding the rwlock. 2. Because lock_sock() can sleep, defer the final release of the nfc_llcp_local structure to a workqueue (release_work). This avoids a sleeping-in-atomic bug when the last local reference is dropped from softirq context. Additionally, hold a single device reference on local from registration until final destruction. 3. In nfc_llcp_local_get(), use kref_get_unless_zero() to prevent resurrecting a local object whose teardown has been scheduled. 4. In llcp_sock_accept(), verify that the listener socket state is still LLCP_LISTEN after waking from schedule_timeout() to prevent hangs if the listener is closed concurrently. 5. When unlinking unaccepted child sockets during listener release, unlink them from local->sockets, call sock_orphan(), and drop their initial sk_alloc creation reference via sock_put(). 6. Make nfc_llcp_accept_unlink() idempotent by guarding parent access with a NULL check.

Linux

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: fix sdreq TLV list leak on parse/alloc/send failure nfc_genl_llc_sdreq() builds a list of TLV nodes while walking nested netlink attrs, but 3 error paths (nested-attr parse failure, TLV alloc ENOMEM, nfc_llcp_send_snl_sdreq() failure) all skip freeing what was already queued. Route them through a new free_list label, mirroring the SDRES path in the same file which already does this. Harmless on the success path too -- send_snl_sdreq() drains the list as it moves nodes, so it's already empty by the time free_list runs.

Linux

In the Linux kernel, the following vulnerability has been resolved: nfc: st21nfca: validate ISO15693 inventory length The ISO15693 inventory helper removes a two-byte prefix without checking that it exists, then accepts a one-byte remainder before reading data[1] as the DSFID. Require the prefix and at least two remaining bytes before copying the UID data and reading the DSFID.

Linux

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: fix WKS SAP hijacking via prefix match in nfc_llcp_wks_sap() nfc_llcp_wks_sap() compares only service_name_len bytes, so a short service_name like "u" matches longer WKS strings like "urn:nfc:sn:snep". Fix by requiring exact length match before strncmp().

Linux

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: fix slab-out-of-bounds reads when logging service names nfc_llcp_wks_sap() and nfc_llcp_build_sdreq_tlv() pass non-null- terminated strings to pr_debug() using the %s format specifier. The buffers are allocated via kmemdup() or come from netlink attributes and are not guaranteed to be null-terminated, causing __dynamic_pr_debug() to read beyond the allocated region: KASAN: slab-out-of-bounds Read in __dynamic_pr_debug Fix both call sites by using %.*s with the explicit length to limit the output to the actual length of the string.

Linux

In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: fix OOB read in pn533_acr122_is_rx_frame_valid() frame->ccid.datalen is read directly from the USB response frame and used, unchecked, as an index into frame->data[]. A malicious or malfunctioning device can set this field to an arbitrary value, causing the driver to read far outside the received buffer. Bound ccid.datalen against the maximum possible ACR122 frame size before using it. This replaces the existing datalen == 0 check, since datalen < 2 already covers that case and additionally rejects datalen == 1, which would still underflow the "datalen - 2" offset used below.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: stop Tx NAPI before disabling the queues bcmgenet_netif_stop() and the Wake-on-LAN branch of bcmgenet_suspend() both disable the Tx queues first and stop Tx NAPI several steps later. A completion in flight calls netif_tx_wake_queue() in between, and nothing stops the queue again, so a transmit can reach the rings after they have been freed. Close is safe because dev_deactivate_many() stops the qdisc first. bcmgenet_suspend() does not, so stop Tx NAPI before the queues on both paths. KASAN on a Raspberry Pi CM4, driven from an MTU change because suspend freezes user space before the callback runs: BUG: KASAN: use-after-free in bcmgenet_xmit+0x17f8/0x2258 Write of size 8 at addr ffffff8055844a68 by task ksoftirqd/0/14 bcmgenet_xmit+0x17f8/0x2258 dev_hard_start_xmit+0x13c/0x588 sch_direct_xmit+0x108/0x340 __dev_queue_xmit+0x1190/0x3848

Linux

In the Linux kernel, the following vulnerability has been resolved: net: skbuff: fix pull-bound underflow in skb_checksum_setup_ipv6() skb_maybe_pull_tail() subtracts skb_headlen(skb) from the unsigned max argument and passes the result to __pskb_pull_tail() as a signed int. The function does not ensure that max is at least skb_headlen(skb). This can happen while parsing IPv6 extension headers when an skb already has a linear area larger than MAX_IPV6_HDR_LEN. Once the parser needs data beyond the linear area, max - skb_headlen(skb) wraps and is converted to a negative delta. __pskb_pull_tail() then passes that negative length to skb_copy_bits(), where it can become a very large copy length. Pass the requested length itself as the pull bound at the three extension-header call sites, so the delta can no longer go negative.

Linux

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix immediate JMP JEQ/JNE on MIPS32 An addu instruction was emitted instead of addiu, causing the immediate value 1 to be interpreted as register $at. This made the comparison result invalid when the immediate operand was negative. Note that $at is mapped to BPF_REG_AX, which is used for constant blinding. Fix the instruction to use the immediate form. Found with test_bpf on MIPS32r1 emulated by QEMU.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: clear stale buf->page after recycling on skb build failure In stmmac_rx(), when napi_build_skb() fails the descriptor page is recycled back to the page pool with page_pool_recycle_direct(), but buf->page is left pointing at the recycled page, unlike every other consumption site in the function which clears the pointer after handing the page away. With the stale pointer stmmac_rx_refill() skips the replacement allocation and programs the already-recycled page back into the RX descriptor. Clear buf->page on the napi_build_skb() failure path to keep the buffer lifecycle consistent with the other consumption sites.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: ipv6: keep room for the mac header in dst_dev_overhead() The seg6, ioam6 and rpl lwtunnels size their skb_cow_head() request as the length they are about to push plus dst_dev_overhead(), then push the new headers and rebuild the mac header below them with skb_mac_header_rebuild(). That rebuild needs skb->mac_len of headroom, but dst_dev_overhead() leaves LL_RESERVED_SPACE() of the egress device, 16 bytes for plain Ethernet. Where the mac header is longer than that, as it is on ingress through a VLAN device with reorder_hdr off, the rebuild runs out of room: skb_set_mac_header(skb, -skb->mac_len) computes a negative offset, stores it unchecked in the u16 skb->mac_header, and the memmove that follows writes skb->mac_len bytes about 64 KB past skb->head. Forwarding plain ping6 traffic through such a device reproduces it on all five seg6 encapsulation modes and on the rpl and ioam6 inline paths; skb->mac_header comes back as 65534 on a 704-byte head. Return the larger of the two. The helper already returns skb->mac_len when it has no dst, so this only makes the other branch agree, and it covers every caller rather than each call site in turn.

Linux

In the Linux kernel, the following vulnerability has been resolved: ip_gre: Reject enabling collect metadata through changelink ipgre_netlink_parms() can enable collect_md on an existing GRE, GRETAP or ERSPAN device. Unlike newlink, changelink does not enforce metadata tunnel uniqueness. Converting a non-metadata device can therefore replace the metadata receive entry for another device of the same type in the same netns. Deleting either device then clears the shared entry, breaking metadata receive lookup for the surviving device. If parameter validation fails after collect_md is set, deleting the modified device can also clear an entry it never owned. Reject enabling metadata mode in both changelink callbacks before any encapsulation or tunnel parameters are modified. Allow requests that repeat the metadata attribute on an existing metadata device.

Linux

In the Linux kernel, the following vulnerability has been resolved: vxlan: use one headroom snapshot for neighbour replies vxlan_na_create() samples LL_RESERVED_SPACE() to size the reply skb and then samples it again to reserve headroom. A concurrent vxlan_changelink() can update needed_headroom between the two reads, creating a TOCTOU race. The second value can exceed the allocation and make the Ethernet header write out of bounds. The race is reproducible on the unpatched kernel. It occurred when vxlan_na_create() generated a neighbour reply while vxlan_changelink() changed the link headroom. KASAN caught a four-byte write two bytes beyond a 704-byte skbuff_small_head allocation. Snapshot the headroom once and use that value for both allocation and reservation.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: xps: reject an out of range traffic class Only the entries below dev->num_tc are valid in dev->tc_to_txq[], and dev->prio_tc_map[] may only name classes below it. netdev_set_num_tc() lowers dev->num_tc without touching either array. netdev_txq_to_tc() walks all TC_MAX_QUEUE slots and netdev_get_prio_tc_map() returns the entry as it stands, so a leftover entry is handed out as a traffic class >= dev->num_tc. Taking that class from netdev_txq_to_tc(), __netif_set_xps_queue() rejects only a negative one and indexes an XPS map sized for dev->num_tc classes: tci = j * num_tc + tc; RCU_INIT_POINTER(new_dev_maps->attr_map[tci], map); attr_map[] holds nr_ids * num_tc entries and j runs over the ids named in the mask, so a class that is not below num_tc pushes tci past the end of the map for the last ids and the store overruns it. Any caller that lowers num_tc leaves such entries behind, and mqprio_destroy() tears down with netdev_set_num_tc(dev, 0) rather than netdev_reset_tc(). After mqprio with 8 classes then 1, tc_to_txq[1..7] still describe txq 1..7. The splat is from an XPS write to txq 2 on a veth with 8 rx queues: attr_map[] has 8 * 1 entries, tci = j + 2, and j == 6 stores one past the end of the 88-byte map: BUG: KASAN: slab-out-of-bounds in __netif_set_xps_queue (net/core/dev.c:2954) Write of size 8 at addr ffff88813016bc58 by task xps_oob/634 __netif_set_xps_queue (net/core/dev.c:2954) xps_rxqs_store (net/core/net-sysfs.c:1880) netdev_queue_attr_store (net/core/net-sysfs.c:1390) Allocated by task 634: __kmalloc_noprof (mm/slub.c:5439) __netif_set_xps_queue (net/core/dev.c:2937) The buggy address is located 0 bytes to the right of allocated 88-byte region [ffff88813016bc00, ffff88813016bc58) Reject a class the map has no room for.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/imagination: clamp freelist reconstruction requests The firmware reconstruction count controls accesses to the request's fixed freelist ID array and the copy into the fixed response array. Neither access currently bounds the count to those protocol arrays. Clamp the count to the request capacity, which is shared by the response layout, and use that count consistently for reconstruction and response publication. Keep the firmware recovery exchange instead of dropping an oversized request without a response, as discussed with the firmware maintainer. The issue was found by our static-analysis tool.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: dsa: mt7530: fix NULL dereference on unbind of MT7531 and MT7621 The core and io supplies are only requested for ID_MT7530: both the devm_regulator_get() in probe and the regulator_enable() in mt7530_setup() are guarded by the switch id, but mt7530_remove() disables them unconditionally. On an MT7621 or an MT7531 both pointers are still NULL from devm_kzalloc(), so rmmod or a sysfs unbind calls regulator_disable() on NULL.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: dsa: mt7530: leave the MDIO IRQ mappings to regmap-irq mt7530_remove_common() disposes the per-PHY interrupt mappings from .remove, but the regmap-irq chip that owns the domain is devm-registered, so its parent interrupt is only freed once .remove has returned. The switch's own regmap-irq thread can therefore still dispatch on a mapping that is already gone: irq_find_mapping() returns 0, irq_to_desc() returns NULL and handle_nested_irq() locks desc->lock without checking it. The attached PHYs have not given those interrupts back yet either, which the kernel warns about a moment before the fault. regmap_del_irq_chip() disposes the same mappings itself, after freeing the parent interrupt and before removing the domain, so there is nothing left for the driver to do here. Until it runs the descriptors stay alive, and a late dispatch on one of them is harmless: dsa_unregister_switch() has freed the PHY handlers by then, so handle_nested_irq() finds no action and returns.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: phylink: record the PHY only once bringup cannot fail phylink_bringup_phy() stores the PHY in pl->phydev before its last fallible step: on a MAC whose phylink ops implement LPI, phy_eee_rx_clock_stop() can fail with a real MDIO error. The callers unwind with phy_detach(), which knows nothing about pl->phydev, so a pointer to a PHY that is no longer attached outlives the failed connect. What that costs depends on how the caller got here. phylink_connect_phy() goes through phylink_attach_phy(), which refuses to attach while pl->phydev is set, turning a transient MDIO error into a permanent -EBUSY. The SFP path is worse than that: sfp_sm_probe_phy() answers the failure with phy_device_remove() and phy_device_free(), and it assigns sfp->mod_phy only past that error return, so nothing clears pl->phydev and it is left pointing at a freed phy_device that phylink_resolve() and the ethtool helpers go on reading. phylink_fwnode_phy_connect() has no such check, so a later connect overwrites the stale pointer and hides the problem. A disconnect does not: phylink_disconnect_phy() hands that pointer to phy_disconnect(), and the second phy_detach() on the same PHY drops references the first one already released. Found while making a DSA port survive a PHY whose driver arrives after the switch probes: keeping the port across a failed connect and retrying is what makes this window reachable. Publish the pointer after the last call that can fail instead of unwinding it afterwards. Nothing between the two points reads pl->phydev, and the registration that follows cannot fail: phy_request_interrupt() falls back to polling on its own. The PHY-side state keeps the order it had, so no MDIO operation moves relative to another.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: libwx: fix races in Tx timestamp handling wx->ptp_tx_skb is shared between the Tx path, the PTP auxiliary worker and the timestamp cleanup paths. The WX_STATE_PTP_TX_IN_PROGRESS bit prevents multiple Tx paths from submitting timestamp requests, but does not serialize the worker against cleanup. As a result, wx_ptp_clear_tx_timestamp() can free an skb after wx_ptp_tx_hwtstamp_work() has obtained its pointer. The worker may then pass the freed skb to skb_tstamp_tx() and release the same reference again. The cleanup path may also clear the in-progress bit while the worker is still processing the old skb. This allows the Tx path to publish a new skb which the worker can subsequently overwrite with NULL, leaking its reference. Add a dedicated spinlock to protect publication and consumption of the Tx timestamp skb. Detach the skb and clear the in-progress bit while holding the lock, then deliver the timestamp and release the skb after dropping it. Use the same locked cleanup in the quiesce path, but keep the detach there free of register accesses: quiesce runs during PCIe error recovery, where MMIO is not reliable, and it deliberately did not touch the device before. The lock is taken with interrupts disabled, because netpoll can call ndo_start_xmit() with hard interrupts already off. When handling a Tx DMA mapping failure, keep the transmit path reference until after comparing the skb under the lock. This prevents skb address reuse from making the error path mistake a newer timestamp request for the failed one.

Linux

In the Linux kernel, the following vulnerability has been resolved: nfp: hold IPsec RX state under the XArray lock nfp_net_ipsec_rx() drops the XArray lock before taking a reference to the xfrm_state it found. The delete path can erase the entry and drop the last state reference in that interval. RX can then try to increment a zero refcount after the state has been queued for destruction. The driver queues firmware invalidation asynchronously; the delete path does not wait for the command to complete or drain pending RX processing. The XFRM garbage collector waits for an RCU grace period before freeing the state. That delays reclamation but does not make acquiring a reference from zero valid. Take the xfrm_state reference before releasing the XArray lock so xa_erase() cannot run between lookup and reference acquisition.

Linux

In the Linux kernel, the following vulnerability has been resolved: net/rds: size a connection's path set by the transport it ends up with __rds_conn_create() computes npaths from the caller's transport before it decides whether a connection to one of the host's own addresses is to be handled by the loopback transport instead. That substitution is what an RDS/TCP socket sending to a local address gets, and after it the path init loop still runs for the TCP transport's RDS_MPATH_WORKERS paths and allocates an ordered workqueue for each, while rds_loop_conn_alloc() only ever provides transport data for path 0. rds_conn_destroy() sizes its teardown from c_trans, by then the loopback transport, so it visits path 0 only - and rds_conn_path_destroy() would skip the other paths anyway, since it returns before destroy_workqueue() for a path without transport data. kfree(c_path) then drops the last pointers to seven workqueues. That repeats for every such connection, on every netns teardown or module unload, and every distinct local destination address is a separate connection. Recompute npaths once the transport is final, so that creation and destruction agree on the set of paths. The c_path array stays sized for the caller's transport; the unused entries are freed with it.

Linux

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix UAF on lgr list traversal in smcr_port_err() smcr_port_err() traverses smc_lgr_list.list without holding smc_lgr_list.lock, allowing a concurrent smc_lgr_terminate_sched() to free an lgr while it is still being dereferenced. Hold smc_lgr_list.lock across the traversal. Update smc_ib_gid_check() to call smcr_port_err() after releasing the lock.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: flush skb_defer_nodes in dev_cpu_dead() When a CPU goes offline, dev_cpu_dead() drains its softnet queues (completion_queue, output_queue, poll_list, process_queue, and input_pkt_queue), but leaves net_hotdata.skb_defer_nodes untouched. If oldcpu goes offline while holding pending skbs in its skb_defer_nodes lists (e.g. below the sysctl_skb_defer_max >> 1 IPI threshold, or if the IPI races with CPU teardown), those skbs remain stranded until oldcpu is brought back online. If any of these skbs hold page_pool fragments, page_pool_destroy() will stall indefinitely waiting for inflight pages to be returned when a netdev or driver is torn down while oldcpu is offline. Additionally, if smp_call_function_single_async() fails in kick_defer_list_purge() because the target CPU went offline, reset defer_ipi_scheduled to 0 so future IPI kicks are not blocked when the CPU comes back online. Also, if oldcpu was the last online CPU on its NUMA node, drain that node's slot across all CPUs so no skbs deferred from that node remain stranded on idle remote CPUs (or if the node itself is subsequently offlined). Finally, in skb_attempt_defer_free(), re-check cpu_online(cpu) and whether the caller migrated CPUs after llist_add(), flushing the node list if so, to close the preemption TOCTOU race against CPU/node teardown.

Linux

In the Linux kernel, the following vulnerability has been resolved: gve: DQO: fix header length used by gve_can_send_tso() for UDP GSO gve_can_send_tso() computes how many buffers each segment of a GSO packet would span, and for this it needs the length of the headers that the device replicates in front of every segment. It unconditionally uses skb_tcp_all_headers(), which reads the doff field of the TCP header. SKB_GSO_UDP_L4 packets have no TCP header: tcp_hdrlen() then reads one byte of the UDP payload, and header_len can be anything in [0, 60] instead of the transport offset plus the eight bytes of the UDP header that gve_prep_tso() programs into the TSO context descriptor. A wrong header length shifts all the segment boundaries computed in the loop, so the number of buffers per segment can be over or under estimated. In the first case, GSO is needlessly disabled for this packet by gve_features_check_dqo() and the stack has to segment it. In the second case, the driver hands the device a packet whose segments span more than GVE_TX_MAX_DATA_DESCS buffers. Use the UDP header length for SKB_GSO_UDP_L4 packets, matching what gve_prep_tso() does.

Linux

In the Linux kernel, the following vulnerability has been resolved: gve: DQO: reject TSO packets with an out of range MSS gve_prep_tso() notes that the device requires the MSS to be <= 9728, but does not enforce it, assuming the 9K MTU enforced by the hypervisor and the 64KB limit on TSO sizes are enough. This does not hold for packets that were not generated locally. A guest behind a tap, or any packet socket user, can provide an arbitrary gso_size in virtio_net_hdr. Layer 2 forwarding does not check the MTU for GSO packets (is_skb_forwardable()), and gso_features_check() only bounds skb->len and gso_segs, never gso_size. Such a packet reaches gve_tx_fill_tso_ctx_desc(), which puts gso_size into the mss field of the TSO context descriptor. This field is 14 bits wide, so a gso_size of 16384 is silently turned into an MSS of zero. Drop these packets from gve_prep_tso(), and make sure that gve_features_check_dqo() leaves their GSO bits alone: skb_segment() splits at gso_size regardless of the MTU, so falling back to software segmentation would give the device non TSO packets bigger than the 9728 bytes it supports. Note that the device can still be given oversized non TSO packets when the stack segments in software for other reasons, for instance after TSO has been disabled with ethtool. This is a generic issue, because the MTU check is skipped for GSO packets in the forwarding path, and is addressed separately.

Linux

In the Linux kernel, the following vulnerability has been resolved: llc: fix skb UAF and leaks on llc_mac_hdr_init() failure In llc_conn_ac_resend_i_xxx_x_set_0_or_send_rr(), if llc_mac_hdr_init() fails, kfree_skb(skb) is called instead of kfree_skb(nskb). This leaks the newly allocated nskb, reads from the freed skb via LLC_I_GET_NR(pdu), and double-frees skb when llc_conn_state_process() drops its reference. In llc_sap_action_send_xid_r() and llc_sap_action_send_test_r(), nskb is leaked if llc_mac_hdr_init() returns an error. Free nskb in all three error paths.

Linux

In the Linux kernel, the following vulnerability has been resolved: vlan: ensure sufficient headroom in vlan_dev_hard_header() Callers that only reserve ETH_HLEN or less (such as llc_alloc_frame()), or skbs allocated before dynamic device/headroom changes (e.g. toggling VLAN_FLAG_REORDER_HDR or bonding/team switching slaves), can reach vlan_dev_hard_header() with insufficient headroom and trigger skb_under_panic(). Use skb_cow_head() in vlan_dev_hard_header() when VLAN_FLAG_REORDER_HDR is not set to ensure sufficient headroom for the VLAN header(s) and the underlying device hard header. Use READ_ONCE() to read dev->hard_header_len and dev->needed_headroom as they can be updated concurrently under RTNL (e.g. in vlan_transfer_features()) while vlan_dev_hard_header() runs locklessly on the transmit path. Also avoid LL_RESERVED_SPACE(dev) here so that the extra HH_DATA_MOD alignment padding does not trigger unnecessary pskb_expand_head() reallocations on inner stacked VLAN devices after the outer VLAN header has been pushed.

Linux

In the Linux kernel, the following vulnerability has been resolved: autofs: fix sbi->pipe file reference leak in autofs_kill_sb() When autofs_fill_super() fails before clearing AUTOFS_SBI_CATATONIC (for example, when find_get_pid() fails on an invalid pgrp mount option, or when an fs_context is closed before mounting), deactivate_locked_super() invokes autofs_kill_sb() -> autofs_catatonic_mode(sbi). Because AUTOFS_SBI_CATATONIC is still set in sbi->flags, autofs_catatonic_mode() returns early without calling fput(sbi->pipe), permanently leaking the pipe struct file reference. Explicitly release sbi->pipe in autofs_kill_sb() if it is still non-NULL after autofs_catatonic_mode().

Linux

In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix a refcount leak in attach_perf_ctx_data() The attach_perf_ctx_data() can race on global and !global cases. The global case is protected by global_ctx_data_rwsem and shares a single reference count using perf_ctx_data.global field. But when it races with !global case, it may miss to set the global field and result in a reference count leak. CPU1 CPU2 ---------------------------------------------------------------- attach_task_ctx_data(.global=1) attach_task_ctx_data(.global=0) cd1 = alloc_perf_ctx_data(); cd2 = alloc_perf_ctx_data(); // { .global = 0, .refcount = 1 }; try_cmpxchg(); // success, // task->perf_ctx_data = cd2 try_cmpxhg(); // fail; old = cd2 refcount_inc_not_zero(&old->refcount); // success // old.refcount = 2 free_perf_ctx_data(cd1); Then later detach_global_ctx_data() will see the data but it's not marked as global, so it won't call detach_task_ctx_data().

Linux

In the Linux kernel, the following vulnerability has been resolved: perf/core: Fill branch entries with a single assignment perf_clear_branch_entry_bitfields() clears the bitfields of struct perf_branch_entry one by one and leaves from/to alone, since callers overwrite those straight away. The list has to be kept in sync with the struct by hand and has already fallen behind: new_type and priv were added to perf_branch_entry and never added here. Only BRBE writes those two, and neither for every record. brbe_set_perf_entry_type() leaves new_type alone for a branch type it does not recognise, and priv is not set for source-only records. arm_pmuv3.c allocates the per-CPU branch stack with kmalloc(), so such a record reaches userspace with whatever the slot held: uninitialised kmalloc() data on the first pass over the buffer, the previous record's values after that. Nothing under arch/x86/events/ writes either field, so only arm64 is affected. Assign the whole entry at each site instead. Everything not named is then zero, and there is no list to keep in sync. The bitfields add up to exactly 64 bits, so the struct has no padding to leave undefined. perf_clear_branch_entry_bitfields() has no callers left, so remove it. perf_entry_from_brbe_regset() assigns an empty literal instead, since it fills from/to conditionally. PERF_BR_SPEC_NA is 0, so dropping the explicit spec assignment changes nothing.

Linux

In the Linux kernel, the following vulnerability has been resolved: tipc: reject invalid and unexpected GRP_ACK_MSG to prevent bc_ackers underflow Commit 48a5fe38772b ("tipc: fix bc_ackers underflow on duplicate GRP_ACK_MSG") rejected duplicate/stale ACKs in tipc_group_proto_rcv() by returning early when less_eq(acked, m->bc_acked). However, that check remains incomplete in two ways: 1. When grp->bc_ackers is zero (e.g. on a quiet group, when replicast ACKs were not requested, or after all expected members have already acknowledged), an unexpected GRP_ACK_MSG with acked > m->bc_acked passes less_eq() and unconditionally decrements grp->bc_ackers. Because bc_ackers is a u16, this wraps to 65535, causing tipc_group_bc_cong() to permanently report congestion and blocking all future group broadcasts on the socket. 2. During an active broadcast round (grp->bc_ackers > 0), the sender transmits packet S and advances grp->bc_snd_nxt to S + 1. Receivers increment their expected counter to S + 1 upon consuming packet S, so the only valid ACK value for the current round is strictly acked == grp->bc_snd_nxt. However, tipc_group_update_bc_members() initializes each member's m->bc_acked to prev = grp->bc_snd_nxt - 1 (S - 1 before increment). This leaves a 2-sequence gap (S - 1 to S + 1) in sequence space. An incoming ACK is therefore neither rejected as duplicate nor prevented from decrementing grp->bc_ackers if an unexpected or stale value (such as S) is received. A member sending acked = S followed by acked = S + 1 could decrement grp->bc_ackers twice in the same round, prematurely clearing bc_ackers or underflowing it. Fix this by: - Dropping GRP_ACK_MSG immediately if grp->bc_ackers is zero. - Requiring acked == grp->bc_snd_nxt and rejecting duplicates where m->bc_acked == acked. Because replicast broadcast rounds are strictly sequential, only grp->bc_snd_nxt can be acknowledged, and each member can acknowledge at most once per round. Note that a related pre-existing issue in tipc_group_delete_member() (where grp->bc_ackers decrementing to zero upon member departure does not restore *grp->open or trigger a socket wakeup) will be addressed in a separate patch.

Linux

In the Linux kernel, the following vulnerability has been resolved: tcp: prevent collapsing skbs across boundary in rtx queue tcp_write_collapse_fence() sets TCP_SKB_CB(skb)->eor = 1 on tcp_write_queue_tail(sk) to prevent skbs queued after a switch to device encryption from being collapsed into earlier skbs. The fence is a no-op if all earlier data has already been transmitted when the switch happens: sk->sk_write_queue is empty. The not yet acknowledged earlier skbs wait in sk->tcp_rtx_queue with eor 0. On a subsequent retransmit or SACK shift, tcp_retrans_try_collapse() or tcp_shift_skb_data() can then merge an skb queued after the switch into one queued before it. Both users of the fence are affected: - psp: devices only encrypt skbs with skb->decrypted set. The merged skb keeps decrypted = 0 from the earlier skb, so merged data sent after psp_sock_assoc_set_tx() is retransmitted in cleartext. - tls device offload: the merged skb straddles the start marker set in tls_set_device_offload(). The software fallback (fill_sg_in() returns -EINVAL) and the mlx5, nfp and funeth drivers cannot handle such an skb and drop it. Every retransmit rebuilds the same skb, so the connection stalls. Fix this in two places, for defense in depth: 1. Fall back to tcp_rtx_queue_tail(sk) in tcp_write_collapse_fence() when tcp_write_queue_tail(sk) is NULL. 2. Check !skb_cmp_decrypted(to, from) in tcp_skb_can_collapse(), as tcp_skb_can_collapse_rx() does on receive. skb_shift(), which both collapse paths call, already has a DEBUG_NET_WARN_ON_ONCE() for this condition.

Linux

In the Linux kernel, the following vulnerability has been resolved: sctp: discard the rest of the packet on a stale-cookie error When an association is in COOKIE-ECHOED state and the peer sends a bundled [ERROR(Stale Cookie)][DATA] packet from one of its non-primary addresses, processing the ERROR chunk takes the non-fatal stale-cookie retry path sctp_sf_do_5_2_6_stale(), which queues SCTP_CMD_DEL_NON_PRIMARY while keeping the association alive. sctp_cmd_del_non_primary() removes every non-primary transport - including the very transport this packet arrived on, which is still referenced by the receive lookup and shared by all chunks of the packet via chunk->transport. sctp_assoc_rm_peer() does redirect asoc->peer.last_data_from away from the removed transport, but right afterwards the bundled DATA chunk makes sctp_assoc_bh_rcv() re-register asoc->peer.last_data_from = chunk->transport unconditionally, undoing the redirection with the just-removed transport. Once the packet is done, the receive reference is dropped and the transport is RCU-freed, while the surviving association keeps the dangling last_data_from. A later FWD-TSN (or the delayed SACK timer) makes sctp_gen_sack() dereference it (->param_flags and friends), and sctp_make_sack()/sctp_outq_select_transport() may write to the freed object and link it into the live transport list. This is a use-after-free triggerable by any malicious SCTP peer (or a local unprivileged user acting as one) with no capabilities required: BUG: KASAN: slab-use-after-free in sctp_do_sm+0x498a/0x5660 Read of size 4 at addr ffff88800e1e356c by task poc/115 Call Trace: sctp_do_sm <- sctp_assoc_bh_rcv <- sctp_inq_push <- sctp_rcv <- ip_protocol_deliver_rcu <- ip_rcv Allocated: sctp_transport_new <- sctp_assoc_add_peer <- sctp_process_init (INIT-ACK processing) Freed: kfree <- sctp_transport_destroy_rcu <- rcu_core (call_rcu queued by sctp_transport_put at end of sctp_rcv) The buggy address is located 364 bytes inside of freed 1024-byte region [ffff88800e1e3400, ffff88800e1e3800), cache kmalloc-1k Note that commit 03a9d10ecf71 ("sctp: drop a chunk if its transport was removed") only covers the window between the receive lookup and the chunk processing (e.g. an ASCONF DEL-IP racing the socket backlog); here the transport is removed *while* the packet is being processed, by an earlier chunk of the same packet, so the drop in sctp_inq_push() does not reach this path. Verified with the bundled [ERROR(Stale Cookie)][DATA] + FWD-TSN reproducer: the KASAN report above still fires with that commit applied, and is gone with this patch on top. Fix it by discarding the rest of the packet on this path, as suggested by Xin. After the stale-cookie ERROR has sent the association back to COOKIE-WAIT and removed the non-primary transports, the remaining chunks of the packet can only run against the restarted handshake while referencing the removed arrival transport through chunk->transport: besides the last_data_from registration above, sctp_cmd_setup_t2() and the sctp_make_*() reply builders would also copy that pointer into association-lifetime state that sctp_assoc_rm_peer() has already sanitized. Let the peer retransmit them, in line with what sctp_inq_push() does for chunks whose transport was removed before processing.

Linux

In the Linux kernel, the following vulnerability has been resolved: af_packet: fix integer overflow in prb_calc_retire_blk_tmo() prb_calc_retire_blk_tmo() computes in 32-bit int arithmetic: mbits = (blk_size_in_bytes * 8) / (1024 * 1024); If I'm reading the validation right, tp_block_size is user controlled and packet_set_ring() only rejects values that are <= 0 as int or not page aligned, so a 256MiB block goes right through (and alloc_one_pg_vec_page() even has a vzalloc fallback for it). 0x10000000 * 8 wraps to INT_MIN, and on a NIC reporting 1 Gbps (div == 1) the function ends up returning -2047. The condition is actually (8 * size) mod 2^32 >= 2^31 && div == 1, so the trigger set is [256,512), [768,1024), [1280,1536) and [1792,2048) MiB. Other sizes wrap to non-negative values and faster links divide the unsigned value back below 2^31, which is why this doesn't blow up for everyone. What makes it fatal is what happens next in init_prb_bdqc(): p1->interval_ktime = ms_to_ktime(prb_calc_retire_blk_tmo(...)); hrtimer_start(&p1->retire_blk_timer, p1->interval_ktime, HRTIMER_MODE_REL_SOFT); A negative relative timeout expires immediately. The callback unconditionally returns HRTIMER_RESTART, and hrtimer_forward() turns the negative interval into hrtimer_resolution: if (interval < hrtimer_resolution) interval = hrtimer_resolution; So the SOFT timer re-fires at the maximum rate forever, holding sk_receive_queue.lock each pass. One CPU spins in softirq until the socket is closed. Repeat with more rings and the machine is gone. The overflow itself is ancient - it was introduced together with TPACKET_V3 in f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation."). Its effect prior to f7460d2989fa ("net: af_packet: Use hrtimer to do the retire operation", v6.18) was not as clear-cut, though: the return value was stored into an unsigned short retire_blk_tov, so a negative result was truncated, and a 0-jiffy delay loop could be programmed as well. Neither is nearly as detrimental as the immediate maximum-rate spin the hrtimer conversion turned it into. (Unrelated to CVE-2019-20812 - that one was the ethtool failure path returning 0, which now returns DEFAULT_PRB_RETIRE_TOV.) Reproducer, needs CAP_NET_RAW (a --network host container has it by default) and a 1 Gbps NIC (QEMU e1000 works): int fd = socket(AF_PACKET, SOCK_RAW, htons(ETH_P_ALL)); bind(fd, ...); int v = TPACKET_V3; setsockopt(fd, SOL_PACKET, PACKET_VERSION, &v, sizeof(v)); struct tpacket_req3 req = { .tp_block_size = 0x10000000, .tp_block_nr = 1, .tp_frame_size = 2048, .tp_frame_nr = 0x10000000 / 2048, .tp_retire_blk_tov = 0, }; setsockopt(fd, SOL_PACKET, PACKET_RX_RING, &req, sizeof(req)); Compute in 64 bits instead. The operands are already bounded by the existing validation, so nothing else changes. If you'd prefer a different fix, just say so and I'll respin.

Linux

In the Linux kernel, the following vulnerability has been resolved: arm64/boot: Disable trapping of PMZR_EL0 writes to EL2 __init_el2_fgt2() writes one mask to both HDFGRTR2_EL2 and HDFGWTR2_EL2. PMZR_EL0 is write-only, so its trap bit, nPMZR_EL0, exists only in HDFGWTR2_EL2 and is therefore never set: a PMZR_EL0 write from the host traps to EL2, where the nVHE hypervisor has no handler and BUG()s. The kernel never writes PMZR_EL0, but kernel.perf_user_access=1 has the PMU driver set PMUSERENR_EL0.UEN for a task with a user-read event, so a write from EL0 reaches the trap and takes the host down without a panic message. Accumulate the HDFGWTR2_EL2 bits separately, as __init_el2_fgt() already does for HDFGWTR_EL2, and set nPMZR_EL0 with the other FEAT_PMUv3p9 bits.

Linux

In the Linux kernel, the following vulnerability has been resolved: ata: libata-scsi: bound the ATA passthru sense descriptor writes When an ATA PASS-THROUGH command to an ATAPI device fails, the sense buffer holds the device's REQUEST SENSE reply, and ata_scsi_set_passthru_sense_fields() trusts its additional length byte, sb[7], when adding the ATA Status Return descriptor. A faulty or malicious device can use that to make the kernel read and write past the 96-byte buffer in three ways: - scsi_sense_desc_find() is passed sb[7] + 8 as the buffer length, so its clamp against sb[7] does nothing and the walk runs off the end. - A type-9 descriptor found near the end is filled in unchecked. - A new descriptor at sb[8 + len] needs len + 22 bytes, not len + 14, so len 75..82 writes up to 8 bytes past the end. Reproduced with KASAN under qemu, with the emulated ATAPI REQUEST SENSE reply patched: BUG: KASAN: slab-out-of-bounds in scsi_sense_desc_find+0x1a5/0x210 BUG: KASAN: slab-out-of-bounds in ata_scsi_qc_complete+0x1a15/0x1a50 Both are gone with this patch, and a valid descriptor is still filled in.

Linux

In the Linux kernel, the following vulnerability has been resolved: bna: prevent IOC timer rearm during teardown bna: prevent IOC timer rearm during teardown bnad_pci_remove() and the probe disable_ioceth path call timer_delete_sync() for ioc_timer, sem_timer and hb_timer, but not for iocpf_timer. bnad_iocpf_timeout() then takes bnad->bna_lock after free_netdev() has freed the struct bnad. Deleting iocpf_timer last does not fix this. sem_timer and iocpf_timer rearm each other: bnad_iocpf_sem_timeout() can arm iocpf_timer, and bnad_iocpf_timeout() arms sem_timer from bfa_ioc_hw_sem_get() when the semaphore is busy. timer_delete_sync() only waits out its own callback. bnad_ioceth_disable() can time out and leave that callback live. Shut all four IOC timers down with timer_shutdown_sync() on both paths, so a later mod_timer() is ignored. This issue was identified during our ongoing static-analysis research while reviewing kernel code.

Linux

In the Linux kernel, the following vulnerability has been resolved: bpf: fs/xattr: don't assume the inode is locked in path_unlink/path_rmdir bpf_lsm_has_d_inode_locked() makes the verifier rewrite bpf_[set|remove]_dentry_xattr() to the _locked variants, which assume that the caller already holds the inode's i_rwsem. The path_unlink and path_rmdir hooks are listed, but security_path_unlink() and security_path_rmdir() run before vfs_unlink()/vfs_rmdir() take the victim inode's i_rwsem, so a sleepable BPF LSM program attached to either hook mutates the victim's xattrs without the lock held. Drop the two path hooks from d_inode_locked_hooks so that the verifier keeps the locking bpf_[set|remove]_dentry_xattr() variants, which take the lock themselves.

Linux

In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Return PERR_NOCPUS in remote_partition_enable() on subpartitions_cpus conflict When a remote partition is created underneath an existing local partition via a non-partition (PRS_MEMBER) intermediate cgroup, update_prstate() sees parent->partition_root_state == PRS_MEMBER and calls remote_partition_enable(). Commit 86888c7bd117 ("cgroup/cpuset: Add warnings to catch inconsistency in exclusive CPUs") replaced the cpumask_intersects(tmp->new_cpus, subpartitions_cpus) error check in remote_partition_enable() with WARN_ON_ONCE(). As a result, remote_partition_enable() emits a warning and proceeds to enable the remote partition on CPUs that are already owned by the ancestor local partition in subpartitions_cpus. This can be reproduced on Linux 7.3.0-rc3 with: mkdir -p /tmp/cg1 mount -t cgroup2 none /tmp/cg1 echo "+cpuset" > /tmp/cg1/cgroup.subtree_control mkdir /tmp/cg1/A echo 1 > /tmp/cg1/A/cpuset.cpus echo 1 > /tmp/cg1/A/cpuset.cpus.exclusive echo root > /tmp/cg1/A/cpuset.cpus.partition echo "+cpuset" > /tmp/cg1/A/cgroup.subtree_control mkdir /tmp/cg1/A/B echo 1 > /tmp/cg1/A/B/cpuset.cpus echo 1 > /tmp/cg1/A/B/cpuset.cpus.exclusive echo "+cpuset" > /tmp/cg1/A/B/cgroup.subtree_control mkdir /tmp/cg1/A/B/D echo 1 > /tmp/cg1/A/B/D/cpuset.cpus echo 1 > /tmp/cg1/A/B/D/cpuset.cpus.exclusive echo root > /tmp/cg1/A/B/D/cpuset.cpus.partition which triggers: WARNING: kernel/cgroup/cpuset.c:1594 at remote_partition_enable+0x1c1/0x300 and leaves both /tmp/cg1/A and /tmp/cg1/A/B/D as active root partitions claiming exclusive CPU 1. Fix this by returning PERR_NOCPUS when tmp->new_cpus intersects subpartitions_cpus in remote_partition_enable(), matching the error code used by remote_cpus_update() for the same subpartitions_cpus conflict, and add a regression test case to tools/testing/selftests/cgroup/test_cpuset_prs.sh. Tested in QEMU on Linux 7.3.0-rc3 using the reproducer above and tools/testing/selftests/cgroup/test_cpuset_prs.sh.

Linux

In the Linux kernel, the following vulnerability has been resolved: fou: reject omitted FOU_ATTR_IPPROTO on FOU_ENCAP_DIRECT Commit 7a9bc9e3f423 ("fou: Don't allow 0 for FOU_ATTR_IPPROTO.") added NLA_POLICY_MIN(NLA_U8, 1) to fou_nl_policy[FOU_ATTR_IPPROTO], which rejects an explicitly supplied FOU_ATTR_IPPROTO == 0 attribute with -ERANGE. However, FOU_ATTR_IPPROTO is an optional netlink attribute. When a user sends FOU_CMD_ADD with FOU_ATTR_TYPE set to FOU_ENCAP_DIRECT and omits FOU_ATTR_IPPROTO entirely, nla_policy validation succeeds and parse_nl_config() leaves cfg->protocol as 0 (from memset(cfg, 0, sizeof(*cfg))). fou_create() then creates a FOU_ENCAP_DIRECT socket with fou->protocol == 0. In fou_udp_recv(), returning -fou->protocol to udp_queue_rcv_one_skb() triggers IP protocol resubmission when fou->protocol > 0, whereas returning 0 tells the UDP tunnel layer that the skb was consumed without freeing it. When fou->protocol == 0, every packet received on the socket returns 0 from fou_udp_recv() and leaks the sk_buff. Reject FOU_ENCAP_DIRECT when !cfg->protocol in fou_create() so that creating a direct encapsulation port without FOU_ATTR_IPPROTO fails with -EINVAL while leaving FOU_CMD_DEL and FOU_CMD_GET (which share parse_nl_config()) unaffected. Tested in QEMU against Linux 7.3.0-rc3 by sending a FOU_CMD_ADD Generic Netlink request with FOU_ATTR_PORT = 5555 and FOU_ATTR_TYPE = FOU_ENCAP_DIRECT while omitting FOU_ATTR_IPPROTO. On the unfixed kernel, FOU_CMD_ADD succeeds (err = 0), FOU_CMD_GET reports fou->type = 1 and fou->protocol = 0, and sending 4000 UDP packets to 127.0.0.1:5555 leaks all 4000 sk_buffs (SUnreclaim in /proc/meminfo grows from 41456 kB to 59008 kB, +17552 kB); with this patch applied, FOU_CMD_ADD is rejected with -EINVAL (-22).

Linux

In the Linux kernel, the following vulnerability has been resolved: fprobe: Terminate the fgraph_data list when the reservation is not filled fprobe_fgraph_entry() reserves shadow stack space for every fprobe with an exit handler, but only fills it for those whose entry handler returns 0. fgraph_reserve_data() does not clear the area, so fprobe_return() parses the unused tail as headers left over from an earlier call, and an exit handler can run twice or despite its entry handler asking to skip it. Write a zero word after the last entry to terminate the walk. A zeroed slot does not decode to a NULL fprobe on the arches that encode the header into one unsigned long, since arch_decode_fprobe_header_fp() ORs in FPROBE_HEADER_MSB_PATTERN, so make read_fprobe_header() return NULL for a zeroed slot.

Linux

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: use d_instantiate_new() in ntfs_create_inode() and murder syzbot's "WARNING in do_new_mount" saga ntfs_create_inode() creates a new inode via ntfs_new_inode(). It hashes it with insert_inode_locked() and so it's marked as I_NEW until unlock_new_inode(). ntfs 3 calls d_instantiate() in between though... Since the dentry was already hashed by the lookup before the create any path walk finds it without touching the parent's i_rwsem and so can lock the inode. If the inode is a directory unlock_new_inode() calls lockdep_annotate_inode_mutex_key() and marks i_rwsem with the i_mutex_dir_key class. That resets the count and the owner of a lock somebody else may already hold by now... syzbot has been spamming us with the same godforsaken bug "WARNING in do_new_mount" since 2023. I can't take it anymore so I went looking. Afaict, syzbot's executor chdirs into a freshly mounted ntfs3 image, creates a directory and then mounts some pseudofs on it. Everytime the mkdir() takes longer than syzbot waits mount() runs concurrently: mkdir("./sys") mount(NULL, "./sys", "sysfs") ntfs_create_inode() d_instantiate() user_path_at() finds the dentry do_lock_mount() inode_lock(inode) namespace_lock() unlock_new_inode() lockdep_annotate_inode_mutex_key() init_rwsem(&inode->i_rwsem) unlock_mount() inode_unlock(inode) The mount side then releases a lock that according to the rwsem nobody holds: DEBUG_RWSEMS_WARN_ON((rwsem_owner(sem) != current) && ...): count = 0x0, magic = 0xffff888043a854e8, owner = 0x0, curr 0xffff888000244880, list empty WARNING: CPU: 0 PID: 5346 at kernel/locking/rwsem.c:1368 __up_write Call Trace: inode_unlock include/linux/fs.h:877 [inline] unlock_mount fs/namespace.c:2892 [inline] do_new_mount_fc fs/namespace.c:3828 [inline] do_new_mount+0x777/0xa40 fs/namespace.c:3887 On PREEMPT_RT the same thing shows up as DEBUG_LOCKS_WARN_ON(rt_mutex_owner(lock) != current) WARNING: kernel/locking/rtmutex_common.h:193 at rt_mutex_slowunlock The up_write() underflows the reset count. A following inode_lock() on that directory then never returns. A path walk into the new directory racing with the mkdir() corrupts the lock the same way via inode_lock_shared() in lookup_slow(). Switch to d_instantiate_new() and drop the trailing unlock_new_inode(). All error paths bail out before that point with I_NEW still set and keep using discard_new_inode(). May we never see this fscking bug report again.

Linux

In the Linux kernel, the following vulnerability has been resolved: writeback: bound cleanup_offline_cgwb() rescans by rotating scanned inodes cleanup_offline_cgwb() prepares at most WB_MAX_INODES_PER_ISW inodes per call and is called again until the dying wb is drained, but every call walks wb->b_attached and then wb->b_dirty_time from the same end. Inodes already prepared (they stay on the list with I_WB_SWITCH set until the switch worker runs) and inodes that cannot be switched (I_FREEING, I_WILL_FREE, !SB_ACTIVE, DAX, already on the target wb) stay where they are, so each pass rescans a growing run of them under wb->list_lock and a full drain is quadratic in the number of inodes on the list. With ~17M inodes attached to one dying cgwb we saw this end in soft lockups, with CPUs reported stuck for 21-48s. Walk both lists from the oldest end and move every scanned inode to the newest end, so the next pass starts where the previous one stopped and the drain becomes linear. b_attached is unordered, so nobody sees the reorder there. b_dirty_time is ordered by dirtied_when, but the oldest unscanned inode stays at the end move_expired_inodes() picks from, sync takes the whole list regardless of order, and prepared inodes leave the list as soon as the switch work runs and get a new dirtied_time_when on the new wb anyway, so the only inodes left out of order are the ones that can never switch (DAX), and only on the dying wb.

Linux

In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix NULL current_pwq deref in flush dependency check check_flush_dependency() uses current_wq_worker() to determine whether the caller is a workqueue worker and then dereferences worker->current_pwq to test whether the current workqueue is WQ_MEM_RECLAIM. current_wq_worker() only means that %current has PF_WQ_WORKER set. A kworker can reach check_flush_dependency() while it is not executing a work item. One such path is worker_thread() acting as the pool manager, where create_worker() does GFP_KERNEL allocation and the allocation path invokes the OOM notifier. In that state worker->current_pwq is NULL because current_pwq is set only by process_one_work() and cleared again after the work function returns. [ 416.760634][ T375] Call trace: [ 416.760638][ T375] check_flush_dependency+0x80/0x120 (P) [ 416.760648][ T375] __flush_work+0x98/0x224 [ 416.760657][ T375] flush_work+0x30/0x44 [ 416.760665][ T375] ... [ 416.760710][ T375] blocking_notifier_call_chain+0x58/0xa0 [ 416.760719][ T375] out_of_memory+0xb4/0x458 [ 416.760730][ T375] __alloc_pages_may_oom+0x11c/0x1a8 [ 416.760739][ T375] __alloc_pages_slowpath+0x314/0x46c [ 416.760746][ T375] __alloc_frozen_pages_noprof+0x110/0x1a4 [ 416.760753][ T375] new_slab+0x12c/0x484 [ 416.760759][ T375] ___slab_alloc+0x7a8/0xc7c [ 416.760765][ T375] __slab_alloc+0x74/0xd8 [ 416.760772][ T375] __kmalloc_cache_node_noprof+0x2ac/0x304 [ 416.760779][ T375] alloc_worker+0x28/0x60 [ 416.760785][ T375] create_worker+0x4c/0x20c [ 416.760790][ T375] worker_thread+0xe8/0x2b8 [ 416.760796][ T375] kthread+0x1a8/0x200 [ 416.760805][ T375] ret_from_fork+0x10/0x20 Guard the WQ_MEM_RECLAIM-worker warning with worker->current_pwq. If the kworker is not currently executing a work item, there is no current workqueue to diagnose with that warning. The PF_MEMALLOC warning is left unchanged so explicit reclaim context flushing a !WQ_MEM_RECLAIM target is still reported.

Linux

In the Linux kernel, the following vulnerability has been resolved: writeback: report a Tasks-RCU quiescent state per cgwb drain pass cleanup_offline_cgwbs_workfn() drains a dying cgwb by calling cleanup_offline_cgwb() until it returns false, with a cond_resched() between passes. On a CONFIG_PREEMPTION kernel that cond_resched() does nothing: _cond_resched() is a plain "return 0", and under PREEMPT_DYNAMIC the full and lazy modes disable it. Since commit 7dadeaa6e851 ("sched: Further restrict the preemption modes") those are the only two models on the architectures with PREEMPT_LAZY support, arm64 and x86 among them, so the drain loop never reports a Tasks-RCU quiescent state. A worker draining a cgwb with millions of attached inodes runs for minutes. On a 6.18 arm64 host in lazy mode the cgwb worker drained one dying cgroup's writeback domain for over 11 minutes. A BPF program unlink (bpf_trampoline_unlink_prog -> bpf_trampoline_update -> unregister_ftrace_direct -> ftrace_shutdown -> synchronize_rcu_tasks()) waited on that grace period while holding the trampoline mutex, 42 tasks queued behind it in D state, and the hung task detector fired at 614 s and panicked the host. Any BPF or ftrace detach during a long drain inherits the drain's length. Fix this by calling cond_resched_tasks_rcu_qs() so we do not stall out anybody who calls sycnrhonize_rcu_tasks(). We put this in a do { } while loop because if we have many small cgroups cleanup_offline_cgwb() will return false and we will never call cond_resched_tasks_rcu_qs(), creating the same problem.

Linux

In the Linux kernel, the following vulnerability has been resolved: fsl/fman: Fix clk reference leak in read_dts_node() of_clk_get() returns a clock with its reference count incremented, but read_dts_node() only uses it to read the rate and never calls clk_put(). The clock is not stored anywhere, so the reference cannot be released later either. Release the clock once its rate has been read, which also covers the error path taken when the rate is zero.

Linux

In the Linux kernel, the following vulnerability has been resolved: ipe: fix use-after-free when auditing a newly loaded policy new_policy() audits the policy after ipe_new_policyfs_node() publishes it and drops the new directory's inode lock. A concurrent delete can free the policy while ipe_audit_policy_load() is still using it. Audit the successful load under that lock. [FW: remove model name according to latest guideline]

Linux

In the Linux kernel, the following vulnerability has been resolved: ipe: protect the dm-verity root hash with RCU ipe_bdev_setintegrity() frees the old root hash when dm-verity publishes a new one on ->preresume, while policy evaluation can still be dereferencing it. Protect the root hash with RCU. The evaluation path already runs under rcu_read_lock(). [FW: remove model name according to latest guideline]

Linux

In the Linux kernel, the following vulnerability has been resolved: ipv6: do not let ipv6_find_hdr() return an offset past the packet end ipv6_find_hdr() walks the extension header chain, skipping each header by the length that header itself declares. ipv6_optlen() returns up to 2048, and the skip is never checked against skb->len, so the offset stored in *offset can point past the end of the packet. openvswitch installs that offset as the transport header, and update_ipv6_checksum() then reads and writes the transport checksum field out of bounds: BUG: KASAN: slab-use-after-free in inet_proto_csum_replace16+0x445/0x470 Read of size 2 at addr ffff88810b754b06 by task ovs_ipv6_oob/629 CPU: 4 UID: 1000 PID: 629 Comm: ovs_ipv6_oob Tainted: G N 7.3.0-rc3+ #348 Call Trace: inet_proto_csum_replace16+0x445/0x470 set_ipv6_addr+0x3dd/0x460 do_execute_actions+0x6a3d/0x7c40 ovs_execute_actions+0xfd/0x480 ovs_packet_cmd_execute+0xc38/0xf20 genl_rcv_msg+0x59e/0x870 netlink_rcv_skb+0x18b/0x450 genl_rcv+0x2d/0x40 netlink_unicast+0x6bc/0xa20 The buggy address belongs to the object at ffff88810b754980 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 390 bytes inside of freed 704-byte region [ffff88810b754980, ffff88810b754c40) Other callers use that offset too, so bound it here rather than in one caller. Reject a header whose declared length does not fit in the packet. ipv6_find_hdr() already fails with -EBADMSG on a malformed chain, so this adds no new failure mode.

Linux

In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: enforce exact attribute length for SEG6_ATTR_DST In seg6_genl_policy, SEG6_ATTR_DST is defined with .type = NLA_BINARY and .len = sizeof(struct in6_addr). For NLA_BINARY, .len only enforces the maximum payload length and permits shorter payloads (e.g., 0 bytes). When seg6_genl_set_tunsrc() copies sizeof(struct in6_addr) bytes via kmemdup(val, sizeof(*val), GFP_KERNEL), a short SEG6_ATTR_DST attribute triggers a 16-byte out-of-bounds read past skb->tail into uninitialized skb->head memory, which is stored in sdata->tun_src and leaked back to userspace via SEG6_CMD_GET_TUNSRC. Switch SEG6_ATTR_DST in seg6_genl_policy to NLA_POLICY_EXACT_LEN(sizeof(struct in6_addr)) so that generic netlink validation rejects any attribute whose length is not exactly sizeof(struct in6_addr) with -ERANGE. Tested in QEMU against Linux 7.3.0-rc3 by sending a SEG6_CMD_SET_TUNSRC Generic Netlink message with a 0-byte SEG6_ATTR_DST attribute followed by SEG6_CMD_GET_TUNSRC. On the unfixed kernel, SEG6_CMD_SET_TUNSRC succeeds (err = 0) and SEG6_CMD_GET_TUNSRC leaks 16 bytes of uninitialized kernel heap memory (tun_src = 836a61ecc4d25a1042a8d60411cfb378); with this patch applied, SEG6_CMD_SET_TUNSRC is rejected by netlink policy validation with -ERANGE (-34) and tun_src remains zeroed.

Linux

In the Linux kernel, the following vulnerability has been resolved: kprobes: Fix permanent hang when flushing the kprobe optimizer Writing 0 to /proc/sys/debug/kprobes-optimization while a kprobe is jump-optimized never returns. The writer sleeps in D state forever with kprobe_sysctl_mutex held, so any later read or write of that sysctl hangs as well. For example, with vfs_read+9 as an optimizable address in this build: # cd /sys/kernel/tracing # echo 'p:myprobe vfs_read+9' >> kprobe_events # echo 1 > events/kprobes/myprobe/enable # # wait until /sys/kernel/debug/kprobes/list shows [OPTIMIZED] # echo 0 > /proc/sys/debug/kprobes-optimization INFO: task sh:246 blocked for more than 10 seconds. Call Trace: <TASK> __schedule+0x1176/0x4f70 schedule+0xdc/0x2c0 schedule_timeout+0x17b/0x260 wait_for_completion+0x173/0x3c0 wait_for_kprobe_optimizer_locked+0xbc/0x130 proc_kprobes_optimization_handler+0x156/0x1b0 proc_sys_call_handler+0x324/0x490 vfs_write+0x52d/0xfe0 ksys_write+0xff/0x200 do_syscall_64+0x106/0x630 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> ... INFO: task cat:265 is blocked on a mutex likely owned by task sh:246. wait_for_kprobe_optimizer_locked() reinitializes optimizer_completion, asks the optimizer thread to flush and sleeps in wait_for_completion(). The thread drains the (un)optimizing lists, but calls complete() only if completion_done() is true, i.e. if the completion is already done, which never happens while someone waits. disarm_all_kprobes() and kprobe_trace_self_tests_init() wait the same way. Calling complete() unconditionally would not be enough: the waiter drops kprobe_mutex while it sleeps, and nothing else serializes the sysctl handler against the debugfs "enabled" file. A second flusher that still finds the lists non-empty, e.g. because a disabled probe is queued for unoptimizing, reinitializes the completion under the first: sysctl write debugfs "enabled" write unoptimize_all_kprobes() wait_for_kprobe_optimizer_locked() init_completion(c) mutex_unlock(&kprobe_mutex) wait_for_completion(c) disarm_all_kprobes() wait_for_kprobe_optimizer_locked() init_completion(c) // c->wait is reset, the first // waiter is off the queue mutex_unlock(&kprobe_mutex) wait_for_completion(c) kprobe_optimizer() complete(c) // wakes the debugfs writer only where c is &optimizer_completion. Lining up the two writes during an optimizer pass loses the sysctl writer this way. Replace the completion with a counter of optimizer passes, bumped at the end of each pass and signalled with wake_up_var_locked(), both under kprobe_mutex. A flusher samples the count and waits with wait_var_event_mutex(), which drops kprobe_mutex only while sleeping, so a new count means a whole pass ran in the meantime. Nothing is reinitialized, so several flushers can sleep in the wait at once.

Linux

In the Linux kernel, the following vulnerability has been resolved: gpio: arizona: Fix runtime PM leak in arizona_gpio_direction_out() Switching a persistent GPIO line from input to output acquires a runtime PM reference on the parent device, but if the subsequent regmap_update_bits() fails the reference is never dropped and no later direction_in() can balance it since the direction was never changed. Drop the reference on the update failure path.

Linux

In the Linux kernel, the following vulnerability has been resolved: gpio: cdev: fix kernel stack leak to user-space in error path If we fail to acquire the GPIO chip guard in gpio_desc_to_lineinfo(), we return immediately before zeroing the info struct we'll end up passing to the user-space later in lineinfo_get_v1(). This may leak the kernel stack contents. Make gpio_desc_to_lineinfo() return int so that the -ENODEV returned on failure to acquire the guard can be propagated to the callers. While not strictly necessary: move the memset() before trying to acquire the SRCU read lock too for good measure.

Linux

In the Linux kernel, the following vulnerability has been resolved: gpio: zynq: fix runtime PM leak on request error path pm_runtime_get_sync() leaves the usage counter incremented even when it fails, and zynq_gpio_request() returns the error without dropping it. gpiolib does not call ->free() when ->request() fails, so zynq_gpio_free(), which holds the only matching pm_runtime_put(), never runs. The reference is leaked and the controller can no longer runtime-suspend, so its clock stays enabled. Switch to pm_runtime_resume_and_get(), which only increments the usage counter on success.

Linux

In the Linux kernel, the following vulnerability has been resolved: llc: reserve device headroom for allocated frames llc_alloc_frame() reserves link-layer headroom using the device type. This is insufficient for stacked Ethernet devices such as VLAN devices, where vlan_dev_hard_header() pushes a VLAN header before the lower device's Ethernet header. An LLC response on such a device can therefore underflow skb headroom in eth_header(). Use LL_RESERVED_SPACE() to account for the device's actual required headroom while preserving the existing LLC device-type check.

Linux

In the Linux kernel, the following vulnerability has been resolved: mctp: route: iterate socket tag list in mctp_lookup_prealloc_tag() When a socket transmits a packet with MCTP_TAG_PREALLOC set, mctp_lookup_prealloc_tag() iterates over the per-netns &mns->keys list and matches netid, req_tag, peer_addr, and manual_alloc, without checking whether tmp->sk == &msk->sk. This allows any MCTP socket in the same network namespace to use and consume another socket's preallocated tag. Iterate the socket's own tag list (&msk->keys via sklist) instead of the namespace-wide &mns->keys list in mctp_lookup_prealloc_tag(), ensuring that only tags allocated by msk are matched. Tested in QEMU against Linux 7.3.0-rc3 by allocating a manual tag (0x18) on socket A via SIOCMCTPALLOCTAG for peer EID 9 and sending a 4-byte message with MCTP_TAG_PREALLOC from socket B in the same network namespace. On the unfixed kernel, sendto(sock_b) using socket A's preallocated tag succeeds (ret = 4); with this patch applied, sendto(sock_b) fails with -ENOENT (errno = 2) while sendto(sock_a) succeeds (ret = 4).

Linux

In the Linux kernel, the following vulnerability has been resolved: rds: ib: Clear the sg list when mapping an MR fails rds_ib_map_frmr() stores the caller's scatterlist in the MR before DMA mapping and registration can fail. On failure, __rds_rdma_map() unpins the pages and frees the scatterlist, but rds_ib_free_frmr() can still return the MR to the pool with the stale pointer set. This leaves the pool with a dangling scatterlist and can lead to local privilege escalation. KASAN detects the resulting use-after-free when the MR is later torn down: BUG: KASAN: slab-use-after-free in __rds_ib_teardown_mr Read of size 8 Call Trace: __rds_ib_teardown_mr rds_ib_unreg_frmr rds_ib_flush_mr_pool rds_ib_flush_mrs rds_free_mr rds_setsockopt Store the scatterlist in the MR only after DMA mapping succeeds. If DMA mapping fails, return directly while the MR fields remain clear; the caller keeps ownership of the scatterlist and its pinned pages. If a later registration step fails, unmap the scatterlist and clear the MR fields before returning.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/client: fix restore of partially initialized client I got a null-ptr-deref report when closing a DRM file descriptor: WARNING: drivers/gpu/drm/drm_atomic.c:2031 at __drm_atomic_helper_set_config+0x18e/0x1b0 [drm] Call Trace: drm_client_modeset_commit_atomic+0x16b/0x220 [drm] drm_client_modeset_commit_locked+0x56/0x160 [drm] drm_client_modeset_commit+0x21/0x40 [drm] __drm_fb_helper_restore_fbdev_mode_unlocked.part.0+0x7b/0x80 drm_fbdev_client_restore+0xe/0x20 [drm_client_lib] drm_client_dev_restore+0x9f/0xc0 [drm] drm_release+0xc5/0xe0 [drm] The warning is followed by a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: __drm_fb_helper_restore_fbdev_mode_unlocked.part.0+0x41/0x80 [drm_kms_helper] Call Trace: drm_fbdev_client_restore+0xe/0x20 [drm_client_lib] drm_client_dev_restore+0x9f/0xc0 [drm] drm_release+0xc5/0xe0 [drm] __fput+0xdc/0x2b0 __x64_sys_close+0x39/0x80 do_syscall_64+0x8d/0x460 entry_SYSCALL_64_after_hwframe+0x76/0x7e drm_client_register() adds the DRM client to the device client list before invoking the initial hotplug callback. If the hotplug callback fails, the client remains registered. For the fbdev client, a failure during drm_fb_helper_initial_config() causes the partially initialized fbdev helper to be cleaned up. drm_fb_helper_fini() releases fb_helper->info and leaves it NULL. The fbdev client therefore remains registered even though there is no fully initialized framebuffer device. Later, when userspace closes the DRM file descriptor, drm_release() can invoke the restore callbacks of registered DRM clients: drm_release() drm_client_dev_restore() drm_fbdev_client_restore() drm_fb_helper_restore_fbdev_mode_unlocked() drm_fbdev_client_restore() currently restores the fbdev state unconditionally. For a partially initialized fbdev client this can submit an incomplete modeset state and subsequently access fbdev state which has not been initialized, resulting in the warning and NULL pointer dereference above. drm_fbdev_client_unregister() already uses fb_helper->info to distinguish a fully probed framebuffer device from a partially initialized client. Use the same condition in drm_fbdev_client_restore() and skip restore if no framebuffer device has been successfully initialized.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Propagate map failures correctly from pvr_mmu_map_sgl() Map failure from pvr_mmu_map_sgl() interface was not returned correctly to pvr_mmu_map() interface. This resulted in pvr_mmu_map() interface to continue instead of returning an error to caller. Fix it by returning a proper error code from pvr_mmu_map_sgl() interface. Call stack for crash: [ 1179.286237] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [ 1179.295067] Mem abort info: [ 1179.297877] ESR = 0x0000000096000004 [ 1179.301656] EC = 0x25: DABT (current EL), IL = 32 bits [ 1179.306987] SET = 0, FnV = 0 [ 1179.310048] EA = 0, S1PTW = 0 [ 1179.313198] FSC = 0x04: level 0 translation fault [ 1179.318096] Data abort info: [ 1179.320993] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 1179.326483] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 1179.331546] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 1179.336895] user pgtable: 4k pages, 48-bit VAs, pgdp=000000009822a000 [ 1179.343402] [0000000000000008] pgd=0000000000000000, p4d=0000000000000000 [ 1179.350243] Internal error: Oops: 0000000096000004 [#2] SMP [ 1179.355908] Modules linked in: powervr gpu_sched drm_shmem_helper drm_gpuvm drm_exec xhci_plat_hcd xhci_hcd dwc3 usbcore usb_common snd_soc_simple_card snd_soc_simple_card_utils dwc3_am62 at24 sa2ul sha512 libsha512 sha256 authenc sch_fq_codel fuse dm_mod ipv6 [ 1179.378992] CPU: 1 UID: 1000 PID: 680 Comm: deqp-vk Tainted: G D 6.17.0 #1 PREEMPT [ 1179.388120] Tainted: [D]=DIE [ 1179.390994] Hardware name: Texas Instruments AM625 SK (DT) [ 1179.396467] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1179.403415] pc : pvr_mmu_op_context_unmap_curr_page+0x6c/0x134 [powervr] [ 1179.410140] lr : pvr_mmu_op_context_unmap_curr_page+0x58/0x134 [powervr] [ 1179.416848] sp : ffff8000839ab8c0 [ 1179.420153] x29: ffff8000839ab8c0 x28: 0000000000000001 x27: 000000008f386000 [ 1179.427283] x26: ffff000016d1df98 x25: 0000000000247000 x24: 00000000000001e6 [ 1179.434413] x23: 0000000000000002 x22: 000000000000ffff x21: 0000000000000247 [ 1179.441540] x20: 0000000000000245 x19: ffff000016d1df60 x18: 0000000000000002 [ 1179.448668] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000001 [ 1179.455793] x14: 0000000000060810 x13: ffff80007fffffff x12: ffff000004190480 [ 1179.462921] x11: ffff8000853f7000 x10: ffff8000811ae000 x9 : ffff0000041900b8 [ 1179.470051] x8 : 0000000000000000 x7 : 00000000990c4001 x6 : 0000000000000007 [ 1179.477177] x5 : ffff000016d1df60 x4 : 0000000000000000 x3 : ffff00000a7d8000 [ 1179.484306] x2 : 00000000000001ff x1 : 0000000000000000 x0 : 0000000000000000 [ 1179.491433] Call trace: [ 1179.493872] pvr_mmu_op_context_unmap_curr_page+0x6c/0x134 [powervr] (P) [ 1179.500582] pvr_mmu_map+0x31c/0x388 [powervr] [ 1179.505027] pvr_vm_gpuva_map+0x40/0x88 [powervr] [ 1179.509732] __drm_gpuvm_sm_map+0x250/0x44c [drm_gpuvm] [ 1179.514952] drm_gpuvm_sm_map+0x48/0x5c [drm_gpuvm] [ 1179.519822] pvr_vm_bind_op_exec+0x64/0x70 [powervr] [ 1179.524785] pvr_vm_map+0x1f8/0x2a8 [powervr] [ 1179.529142] pvr_ioctl_vm_map+0x12c/0x188 [powervr] [ 1179.534018] drm_ioctl_kernel+0xb8/0x128 [ 1179.537941] drm_ioctl+0x21c/0x4ec [ 1179.541337] __arm64_sys_ioctl+0xac/0x108 [ 1179.545344] invoke_syscall+0x44/0x100 [ 1179.549091] el0_svc_common.constprop.0+0x40/0xe0 [ 1179.553790] do_el0_svc+0x1c/0x28 [ 1179.557106] el0_svc+0x34/0xf0 [ 1179.560159] el0t_64_sync_handler+0xd0/0xe4 [ 1179.564334] el0t_64_sync+0x198/0x19c [ 1179.567996] Code: 54000300 35000360 f9402261 79409a62 (f9400421) [ 1179.574081] ---[ end trace 0000000000000000 ]---

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/i915: fix incorrect RCU teardown order i915_gem_busy_ioctl uses dma_resv_for_each_fence_unlocked() to iterate over the fences in an GEM object without holding a reference but only the RCU read side lock. What can happen here is that the GEM object is destroyed concurrently while i915_gem_busy_ioctl is still running. This won't free the GEM objects memory, but still drops all the dma_fence references. Now when dma_resv_for_each_fence_unlocked() sees a destroyed dma_fence it assumes that a new fence list was installed and re-starts the loop. But in the case of a destroyed GEM object a new fence list is never installed, only the old one freed and therefore the iteration never finishes resulting in an endless loop. The solution is to drop the fence references only after the RCU grace period. The fixes tag is not necessary the patch introducing the problem, but the one making it so worse that we need to address it. This problem was pointed out by Sashiko-bot. (cherry picked from commit 5113479556025093bf8133bb2dcaa33be2d50921)

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix use-after-free and multi-container gap in kfd_dev_mapping kfd_dev_mapping caches the address_space of the first /dev/kfd opener so that the GPU reset path can call unmap_mapping_range() to zap all userspace mappings of doorbell and MMIO ranges. This design has two bugs that both manifest under SRIOV with multiple containers: 1. Use-after-free / rwsem deadlock. The cached pointer refers to an inode owned by the first opener's container. When that container exits and its inode is released, kfd_dev_mapping becomes a dangling pointer. A subsequent GPU reset dereferences it inside unmap_mapping_range(), which takes i_mmap_rwsem on the freed inode, causing a hard hang observable as an uninterruptible rwsem wait. 2. Multi-container gap. Only the first opener's address_space is cached; VMAs created by later openers live in a different address_space and are never reached by unmap_mapping_range(). After a GPU reset those stale mappings keep doorbell and MMIO pages accessible to guest userspace with no GPU behind them, risking PCIe transaction timeouts and NMI panics. Fix both bugs with the same approach used by DRM core (drm_drv.c): create a private pseudo-filesystem at module init time and allocate one anonymous inode from it. In kfd_open() redirect every opener's file->f_mapping to that inode's address_space. The inode is module-owned, lives exactly as long as the amdgpu module, and collects VMAs from all openers in one address_space. A single unmap_mapping_range() call in the reset path then correctly reaches every container's mappings with no dangling pointer risk. The hang manifests as an NMI backtrace on the GPU reset workqueue stuck spinning in rwsem_down_read_slowpath() with a corrupted i_mmap_rwsem: Workqueue: amdgpu-reset-dev xgpu_ai_mailbox_flr_work [amdgpu] Call Trace: <TASK> kvm_wait+0x1f/0x40 __pv_queued_spin_lock_slowpath+0x31d/0x3a0 _raw_spin_lock_irq+0x51/0x80 rwsem_down_read_slowpath+0xb3/0x550 down_read+0x48/0xd0 unmap_mapping_range+0x71/0x140 kfd_dev_unmap_mapping_range+0x5b/0x140 [amdgpu] amdgpu_amdkfd_clear_kfd_mapping+0xd8/0x190 [amdgpu] amdgpu_device_gpu_recover+0x232/0x450 [amdgpu] xgpu_ai_mailbox_flr_work+0xb5/0xc0 [amdgpu] process_one_work+0x18e/0x3e0 worker_thread+0x2e3/0x420 kthread+0x10a/0x230 (cherry picked from commit 1128b4a52de1572e87431de837fd9850cb99542c)

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix runtime PM leak in amdgpu_debugfs_test_ib_show() amdgpu_debugfs_test_ib_show() resumes the device with pm_runtime_get_sync() before taking the reset domain semaphore with down_write_killable(). If the write lock acquisition is interrupted, the function returns without calling pm_runtime_put_autosuspend(), leaking the runtime PM reference acquired for the device and keeping the GPU awake. Drop the runtime PM reference on the interrupted down_write_killable() error path before returning. (cherry picked from commit ec30a576c2d4c0364549e6c04218f50704ef56c8)

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/dmem: pin VRAM for the whole registered range Commit c32287471077 ("gpu/drm/nouveau: enable THP support for GPU memory migration") grew the device-private region that nouveau_dmem_chunk_alloc() registers from DMEM_CHUNK_SIZE to DMEM_CHUNK_SIZE * NR_CHUNKS, but left the VRAM buffer object backing that region at DMEM_CHUNK_SIZE. nouveau_dmem_page_addr() returns chunk->bo->offset plus the page's offset within the registered region, so every page past the first chunk resolves to VRAM outside the buffer object. Size the buffer object to the region it backs.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/uvmm: fix UAF in nouveau_uvmm_sm when BO is in TTM_PL_SYSTEM nouveau_uvmm_sm() calls op_map(), which passes bo->resource through nouveau_mem() to nouveau_uvma_map(). nouveau_uvmm_vmm_map() then reads mem->mem.type. But this is only valid when bo->resource is backed by struct nouveau_mem, as is the case for VRAM and TT resources. If the BO is left in TTM_PL_SYSTEM, bo->resource is only a struct ttm_resource. Treating it as struct nouveau_mem makes the mem->mem.type read past the end of the resource, causing a KASAN: slab-use-after-free Read in nouveau_uvmm_sm report: BUG: KASAN: slab-use-after-free in nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline] BUG: KASAN: slab-use-after-free in nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline] BUG: KASAN: slab-use-after-free in op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline] BUG: KASAN: slab-use-after-free in nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903 Read of size 1 at addr ffff888127d3e3a0 by task kworker/0:1/11 CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0 #5 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: nouveau_sched_wq_2224 drm_sched_run_job_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x95/0xe0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcb/0x5a0 mm/kasan/report.c:482 kasan_report+0xca/0x100 mm/kasan/report.c:595 nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline] nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline] op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline] nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903 nouveau_uvmm_sm_unmap drivers/gpu/drm/nouveau/nouveau_uvmm.c:932 [inline] nouveau_uvmm_bind_job_run+0xd6/0x250 drivers/gpu/drm/nouveau/nouveau_uvmm.c:1532 nouveau_job_run drivers/gpu/drm/nouveau/nouveau_sched.c:350 [inline] nouveau_sched_run_job+0x62/0xd0 drivers/gpu/drm/nouveau/nouveau_sched.c:364 drm_sched_run_job_work+0x356/0xa10 drivers/gpu/drm/scheduler/sched_main.c:1061 process_one_work+0x8a5/0x1900 kernel/workqueue.c:3322 process_scheduled_works kernel/workqueue.c:3405 [inline] worker_thread+0x5dd/0xd80 kernel/workqueue.c:3486 kthread+0x31d/0x420 kernel/kthread.c:436 ret_from_fork+0x662/0x940 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 2224 on cpu 0 at 66.550027s: kasan_save_stack+0x24/0x50 mm/kasan/common.c:57 kasan_save_track+0x17/0x60 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __do_kmalloc_node mm/slub.c:5334 [inline] __kmalloc_noprof+0x304/0x7c0 mm/slub.c:5359 _kmalloc_noprof include/linux/slab.h:992 [inline] dma_resv_list_alloc+0x27/0x90 drivers/dma-buf/dma-resv.c:106 dma_resv_reserve_fences+0x60e/0xa30 drivers/dma-buf/dma-resv.c:205 ttm_bo_alloc_resource+0x12c/0xbd0 drivers/gpu/drm/ttm/ttm_bo.c:721 ttm_bo_validate+0x1bc/0x4a0 drivers/gpu/drm/ttm/ttm_bo.c:856 ttm_bo_init_reserved+0x2c3/0x570 drivers/gpu/drm/ttm/ttm_bo.c:970 nouveau_bo_init+0x159/0x2c0 drivers/gpu/drm/nouveau/nouveau_bo.c:359 nouveau_gem_new+0x234/0x5f0 drivers/gpu/drm/nouveau/nouveau_gem.c:272 nouveau_gem_ioctl_new+0x1eb/0x420 drivers/gpu/drm/nouveau/nouveau_gem.c:352 drm_ioctl_kernel+0x192/0x350 drivers/gpu/drm/drm_ioctl.c:817 drm_ioctl+0x4f8/0xb40 drivers/gpu/drm/drm_ioctl.c:914 nouveau_drm_ioctl+0xea/0x2c0 drivers/gpu/drm/nouveau/nouveau_drm.c:1338 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x180/0x1d0 fs/ioctl.c:583 do_syscall_x64 ar ---truncated---

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: Fix bridge reference leak in nv1a_ram_new() pci_get_domain_bus_and_slot() takes a reference to the PCI device, which is never released once the memory size has been read from its config space. Drop the reference before returning.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix double-free in nvif_vmm_dtor On failure, nouveau_cli_init() calls nouveau_cli_fini() to tear the client down. Then, nouveau_drm_open() also enters into its cleanup path and calls nouveau_cli_fini() AGAIN. nouveau_cli_fini() calls nouveau_vmm_fini(): void nouveau_vmm_fini(struct nouveau_vmm *vmm) { nouveau_svmm_fini(&vmm->svmm); nvif_vmm_dtor(&vmm->vmm); vmm->cli = NULL; } Inside nvif_vmm_dtor(), vmm->page is freed unconditionally: void nvif_vmm_dtor(struct nvif_vmm *vmm) { kfree(vmm->page); nvif_object_dtor(&vmm->object); } vmm->page is never cleared after being freed, so the second call of nvif_vmm_dtor() will cause a double-free. Found by fuzzing the nouveau driver with a modified Syzkaller: BUG: KASAN: double-free in nvif_vmm_dtor+0x31/0x50 drivers/gpu/drm/nouveau/nvif/vmm.c:194 Free of addr ffff888010fcdc30 by task syz.0.173/2567 CPU: 1 UID: 0 PID: 2567 Comm: syz.0.173 Not tainted 7.2.0 #24 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x95/0xe0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcb/0x5a0 mm/kasan/report.c:482 kasan_report_invalid_free+0xaa/0xd0 mm/kasan/report.c:557 check_slab_allocation+0xe4/0x110 mm/kasan/common.c:235 kasan_slab_pre_free include/linux/kasan.h:199 [inline] slab_free_hook mm/slub.c:2622 [inline] slab_free mm/slub.c:6377 [inline] kfree+0x192/0x590 mm/slub.c:6692 nvif_vmm_dtor+0x31/0x50 drivers/gpu/drm/nouveau/nvif/vmm.c:194 nouveau_vmm_fini+0x16/0x50 drivers/gpu/drm/nouveau/nouveau_vmm.c:127 nouveau_cli_fini+0x10e/0x210 drivers/gpu/drm/nouveau/nouveau_drm.c:225 nouveau_drm_open+0x24e/0x740 drivers/gpu/drm/nouveau/nouveau_drm.c:1255 drm_file_alloc+0x5f2/0xad0 drivers/gpu/drm/drm_file.c:176 drm_open_helper+0x1d7/0x4a0 drivers/gpu/drm/drm_file.c:335 drm_open+0x190/0x3d0 drivers/gpu/drm/drm_file.c:388 drm_stub_open+0x1f2/0x460 drivers/gpu/drm/drm_drv.c:1211 chrdev_open+0x21c/0x660 fs/char_dev.c:411 do_dentry_open+0x59d/0x12b0 fs/open.c:947 vfs_open+0x82/0x390 fs/open.c:1052 do_open fs/namei.c:4700 [inline] path_openat+0x2345/0x3420 fs/namei.c:4863 do_file_open+0x207/0x460 fs/namei.c:4892 do_sys_openat2+0xd1/0x1d0 fs/open.c:1368 do_sys_open fs/open.c:1374 [inline] __do_sys_openat fs/open.c:1390 [inline] __se_sys_openat fs/open.c:1385 [inline] __x64_sys_openat+0x144/0x200 fs/open.c:1385 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x115/0x690 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fc6d687594d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fc6d5295008 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 00007fc6d6b06180 RCX: 00007fc6d687594d RDX: 0000000000022501 RSI: 0000200000000000 RDI: ffffffffffffff9c RBP: 00007fc6d691c303 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fc6d6b06218 R14: 00007fc6d6b06180 R15: 00007ffd9451d760 </TASK> Allocated by task 2567 on cpu 1 at 163.593900s: kasan_save_stack+0x24/0x50 mm/kasan/common.c:57 kasan_save_track+0x17/0x60 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __do_kmalloc_node mm/slub.c:5334 [inline] __kmalloc_noprof+0x304/0x7c0 mm/slub.c:5359 _kmalloc_noprof include/linux/slab.h:992 [inline] nvif_vmm_ctor+0x3c0/0x7e0 drivers/gpu/drm/nouveau/nvif/vmm.c:237 nouveau_vmm_init+0x40/0x90 drivers/gpu/drm/nouveau/nouveau_vmm.c:134 nouveau_cli_init+0x7b9/0 ---truncated---

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: Fix gem reference leak in validate_init() On the ttm_bo_reserve() failure and "vma not found" error paths, the loop breaks without adding the looked-up object to any validate list, so the reference taken by drm_gem_object_lookup() is never released; validate_fini() only walks the spliced lists. Drop the reference before breaking out on both paths.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: Fix runtime PM leak in nouveau_connector_detect() If nvif_outp_edid_get() fails, nouveau_connector_detect() returns early without dropping the runtime PM reference taken at the start of the function, keeping the device powered on until the next successful detect. Balance the reference on the error path like the other exit paths do.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: RCU-free the scheduler-containing nouveau_sched struct nouveau_sched embeds a struct drm_gpu_scheduler (base). nouveau_sched_destroy() calls nouveau_sched_fini() (which does drm_sched_fini(&sched->base)) and then frees the object with plain kfree(sched). drm_sched_fence_get_timeline_name() returns fence->sched->name, and the scheduler fence keeps a .release callback so it is not ops-detached on signalling. A finished fence exported to userspace via drm_syncobj / sync_file therefore keeps pointing at &sched->base after nouveau_sched_destroy(), and a later get_timeline_name() -- reachable unprivileged through SYNC_IOC_FILE_INFO -- dereferences freed memory (KASAN slab-use-after-free read). Per the dma-fence lifetime contract the exporter must keep the data backing a signalled fence alive for an RCU grace period. Free the scheduler-containing object with kfree_rcu() instead of kfree().

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: don't bump pin count on failed re-pin in nouveau_bo_pin_locked() nouveau_bo_pin_locked() checks whether an already pinned BO is in a memory domain compatible with a new pin request. When the domains are incompatible, it sets -EBUSY but still calls ttm_bo_pin() before returning. Callers treat a failed nouveau_bo_pin() as not having acquired a new pin, so the extra pin count is never decreased by a matching unpin. This triggers the warning in ttm_bo_release(): WARN_ON_ONCE(bo->pin_count); Found when fuzzing the nouveau driver with a modified Syzkaller: WARNING: drivers/gpu/drm/ttm/ttm_bo.c:256 at ttm_bo_release+0x827/0x9e0 drivers/gpu/drm/ttm/ttm_bo.c:256, CPU#1: syz.3.24/2212 Modules linked in: CPU: 1 UID: 0 PID: 2212 Comm: syz.3.24 Not tainted 7.2.0 #24 PREEMPT(lazy) nouveau 0000:01:00.0: gsp:msg fn:103 len:0x40/0x20 res:0x19 resp:0x19 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:ttm_bo_release+0x827/0x9e0 drivers/gpu/drm/ttm/ttm_bo.c:256 Code: 02 00 0f 85 51 01 00 00 48 8b 7b 08 e8 d2 20 01 00 e9 80 fd ff ff e8 d8 15 c0 fe 90 0f 0b 90 e9 e1 f8 ff ff e8 ca 15 c0 fe 90 <0f> 0b 90 e9 a4 f8 ff ff e8 bc 15 c0 fe be 03 00 00 00 4c 89 e7 e8 msg: 00000000: 05 00 d0 c1 04 00 f0 f1 01 30 00 00 2d 90 00 00 .........0..-... RSP: 0018:ffffc9000f5cf710 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff888018e5d2a8 RCX: ffffffff82bb1b36 RDX: ffff888017b68000 RSI: 0000000000000004 RDI: ffff888018e5d2a8 msg: 00000010: 19 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ RBP: ffff88801261c720 R08: 0000000000000001 R09: ffffed10031cba55 R10: ffff888018e5d2ab R11: 00000000000000f3 R12: ffff888018e5d290 R13: ffff888018e5d2d4 R14: ffff88801b219c18 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880e0f6f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b31223ffc CR3: 0000000028e00005 CR4: 0000000000770ef0 PKRU: 80000000 Call Trace: <TASK> kref_put include/linux/kref.h:65 [inline] ttm_bo_put drivers/gpu/drm/ttm/ttm_bo.c:325 [inline] ttm_bo_fini+0x55/0x80 drivers/gpu/drm/ttm/ttm_bo.c:330 nouveau_gem_object_del+0xb2/0x1b0 drivers/gpu/drm/nouveau/nouveau_gem.c:90 drm_gem_object_free+0x5f/0x90 drivers/gpu/drm/drm_gem.c:1165 kref_put include/linux/kref.h:65 [inline] __drm_gem_object_put include/drm/drm_gem.h:562 [inline] drm_gem_object_put include/drm/drm_gem.h:575 [inline] nouveau_abi16_chan_fini.constprop.0+0x44f/0x5a0 drivers/gpu/drm/nouveau/nouveau_abi16.c:195 nouveau 0000:01:00.0: syz.2.23[2209]: Unknown handle 0x00000000 nouveau_abi16_fini+0x1d0/0x340 drivers/gpu/drm/nouveau/nouveau_abi16.c:225 nouveau_drm_postclose+0x18b/0x3e0 drivers/gpu/drm/nouveau/nouveau_drm.c:1284 nouveau 0000:01:00.0: syz.2.23[2209]: validate_init drm_file_free.part.0+0x6d6/0xb60 drivers/gpu/drm/drm_file.c:267 drm_file_free drivers/gpu/drm/drm_file.c:237 [inline] drm_close_helper.isra.0+0x11a/0x160 drivers/gpu/drm/drm_file.c:290 drm_release+0x1ab/0x330 drivers/gpu/drm/drm_file.c:438 __fput+0x39c/0xa60 fs/file_table.c:512 nouveau 0000:01:00.0: syz.2.23[2209]: validate: -2 task_work_run+0x15a/0x230 kernel/task_work.c:233 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0x82b/0x25a0 kernel/exit.c:1009 do_group_exit+0xc2/0x280 kernel/exit.c:1152 get_signal+0x1d6e/0x1f30 kernel/signal.c:3046 arch_do_signal_or_restart+0x7d/0x6e0 arch/x86/kernel/signal.c:337 __exit_to_user_mode_loop kernel/entry/common.c:66 [inline] exit_to_user_mode_loop+0xdf/0x440 kernel/entry/common.c:101 __exit_to_user_mode_prepare include/linux/irq-entry-common.h:207 [inline] syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:230 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:318 [inline] do_syscall_64+0x4f8/0x690 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RI ---truncated---

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: nuke PTs only after unlinking contested VMAs In xe_vm_close_and_put(), external-BO VMAs are queued on the contested list for deferred destruction via xe_vma_destroy_unlocked(). However, xe_vm_pt_destroy() was previously invoked before processing contested VMAs, destroying vm->pt_root while those VMAs were still linked to their respective buffer objects (vm_bo->list.gpuva). If a concurrent thread evicts one of those shared buffer objects, xe_bo_trigger_rebind() holding only bo->resv walks the BO's VMAs and, in fault mode, calls xe_vm_invalidate_vma() -> xe_pt_zap_ptes(). Because vm->pt_root[tile->id] is already NULL, dereferencing pt->level causes a NULL ptr deref. Fix this by deferring xe_vm_free_scratch() and xe_vm_pt_destroy() until after all contested VMAs have been unlinked and destroyed. User is reporting hitting a NULL ptr deref in xe_pt_zap_ptes(), which could be explained by this race. (cherry picked from commit c2863648959489767f08892fd6e90577d2ea0b6a)

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix memory leak of fence event on execbuffer failure virtio_gpu_execbuffer_ioctl() reserves a DRM event with drm_event_reserve_init() when VIRTGPU_EXECBUF_RING_IDX selects a ring that userspace has enabled polling for. virtio_gpu_init_submit() does this before the BO handles, the command buffer, the syncobj arrays and the in-fence are processed, so every later error path runs with the event already pending, including plain argument validation failures such as an invalid bo_handle or an in-syncobj that carries no fence. On those paths, virtio_gpu_cleanup_submit() drops the out-fence without cancelling the event. The fence is freed without ever having been emitted, taking the only driver-side pointer to the event with it. Closing the DRM file does not help. drm_events_release() unlinks pending events but deliberately leaves the freeing to the driver's later drm_send_event(), which never runs for an orphaned event, so the allocation is leaked permanently. Found when fuzzing the virtio driver with Syzkaller: BUG: memory leak unreferenced object 0xffff88802c176e80 (size 96): comm "syz.1.367", pid 10561, jiffies 4294960122 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ c8 6e 17 2c 80 88 ff ff 00 00 00 00 00 00 00 00 .n.,............ backtrace (crc e1973c6b): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4597 [inline] slab_alloc_node mm/slub.c:4917 [inline] __kmalloc_cache_noprof+0x49d/0x6f0 mm/slub.c:5485 _kmalloc_noprof include/linux/slab.h:988 [inline] _kzalloc_noprof include/linux/slab.h:1309 [inline] virtio_gpu_fence_event_create drivers/gpu/drm/virtio/virtgpu_submit.c:282 [inline] virtio_gpu_init_submit drivers/gpu/drm/virtio/virtgpu_submit.c:398 [inline] virtio_gpu_execbuffer_ioctl+0xbbf/0x1aa0 drivers/gpu/drm/virtio/virtgpu_submit.c:505 drm_ioctl_kernel+0x1f4/0x3e0 drivers/gpu/drm/drm_ioctl.c:817 drm_ioctl+0x5f4/0xc70 drivers/gpu/drm/drm_ioctl.c:914 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix by cancelling and freeing the DRM event on the execbuffer error path before dropping the fence. Clear the fence's event pointer after cancellation so it does not retain a dangling pointer.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix NULL pointer dereference on fence allocation failure virtio_gpu_fence_alloc() can fail due to memory pressure and return NULL, but its caller like virtio_gpu_init_submit() never checks it. Later, virtio_gpu_init_submit() passes the NULL fence to virtio_gpu_fence_event_create(), which unconditionally dereferences it. Found when fuzzing the virtio driver with Syzkaller: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000012: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] CPU: 1 UID: 0 PID: 9991 Comm: syz.0.121 Not tainted 7.2.0 #4 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 RIP: 0010:virtio_gpu_fence_event_create drivers/gpu/drm/virtio/virtgpu_submit.c:295 [inline] RIP: 0010:virtio_gpu_init_submit drivers/gpu/drm/virtio/virtgpu_submit.c:398 [inline] RIP: 0010:virtio_gpu_execbuffer_ioctl+0xc78/0x1aa0 drivers/gpu/drm/virtio/virtgpu_submit.c:505 Code: 85 ed 0f 85 21 09 00 00 e8 05 5a c9 fb 48 8b 44 24 10 48 8d b8 90 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9a 0d 00 00 48 8b 44 24 10 4c 89 b0 90 00 00 00 RSP: 0018:ffffc900039dfad0 EFLAGS: 00010216 RAX: dffffc0000000000 RBX: ffffc900039dfdd8 RCX: ffffffff85f6fd3d RDX: 0000000000000012 RSI: ffffffff85f6fd4b RDI: 0000000000000090 RBP: 0000000000000000 R0virtio_gpu_virgl_process_cmd: ctrl 0x102, error 0x1203 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880132c4000 R13: 0000000000000000 R14: ffff888073b6c700 R15: 000000000000003b FS: 00007fab480b96c0(0000) GS:ffff8880eb6e9000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007effbf5e55a8 CR3: 0000000048d19000 CR4: 0000000000350ef0 Call Trace: <TASK> drm_ioctl_kernel+0x1f4/0x3e0 drivers/gpu/drm/drm_ioctl.c:817 drm_ioctl+0x5f4/0xc70 drivers/gpu/drm/drm_ioctl.c:914 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fab471a82bd Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fab480b9018 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fab47435fa0 RCX: 00007fab471a82bd RDX: 00002000000000c0 RSI: 00000000c0406442 RDI: 0000000000000003 RBP: 00007fab480b9080 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00007fab47436038 R14: 00007fab47435fa0 R15: 00007ffe85ab0740 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:virtio_gpu_fence_event_create drivers/gpu/drm/virtio/virtgpu_submit.c:295 [inline] RIP: 0010:virtio_gpu_init_submit drivers/gpu/drm/virtio/virtgpu_submit.c:398 [inline] RIP: 0010:virtio_gpu_execbuffer_ioctl+0xc78/0x1aa0 drivers/gpu/drm/virtio/virtgpu_submit.c:505 Code: 85 ed 0f 85 21 09 00 00 e8 05 5a c9 fb 48 8b 44 24 10 48 8d b8 90 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9a 0d 00 00 48 8b 44 24 10 4c 89 b0 90 00 00 00 RSP: 0018:ffffc900039dfad0 EFLAGS: 00010216 RAX: dffffc0000000000 RBX: ffffc900039dfdd8 RCX: ffffffff85f6fd3d RDX: 0000000000000012 RSI: ffffffff85f6fd4b RDI: 0000000000000090 RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880132c4000 R13: 0000000000000000 R14: ffff888073b6c700 R15: 000000000000003b FS: 00007fab480b96c0(0000) GS:ffff888098ae9000(0000) knlGS:00000000 ---truncated---

Linux

In the Linux kernel, the following vulnerability has been resolved: mm/rmap: fix missing barrier between anon_vma init and vma->anon_vma publish On arm64 server, we find that a task trying to grab the anon_vma lock triggers hungtask. INFO: task main:2354726 blocked for more than 120 seconds. Tainted: G E 5.10.0-0021.aarch64 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:main state:D stack: 0 pid:2354726 ppid:2350673 flags:0x00000a01 Call trace: __switch_to+0x7c/0xbc __schedule+0x3b4/0x8a0 schedule+0x50/0xe0 rwsem_down_write_slowpath+0x3cc/0x6cc down_write+0x60/0x260 __anon_vma_prepare+0x6c/0x210 do_anonymous_page+0x258/0x660 handle_pte_fault+0x188/0x214 __handle_mm_fault+0x1b0/0x380 handle_mm_fault+0xf4/0x284 do_page_fault+0x19c/0x494 do_translation_fault+0xcc/0xf8 do_mem_abort+0x48/0xac el0_da+0x44/0x80 el0_sync_handler+0x88/0xb4 el0_sync+0x160/0x180 After analyzing the vmcore, we found the anon_vma->root->rwsem.count is -1. There is another anon_vma whose anon_vma->root->rwsem.count is 1, the anon_vma->root->rwsem.owner shows the lock is held, but the stack of the task shows the task doesn't hold the anon_vma lock. After adding more debugging info, we found __anon_vma_prepare() reuses anon_vma and triggers the UAF of anon_vma->root due to missing memory barrier, leading to locking and unlocking two different anon_vma->root, thus leading to an anon_vma will never be unlocked, and another anon_vma couldn't be locked anymore. This race requires two adjacent VMAs that are not merged but are anon_vma-compatible (e.g., they differ in VMA_ACCESS_FLAGS that can be changed by mprotect()). Two threads fault on each VMA concurrently, both calling __anon_vma_prepare() with only mmap_lock held for reading. THREAD A THREAD B __anon_vma_prepare __anon_vma_prepare find_mergeable_anon_vma() -> NULL anon_vma = anon_vma_alloc(); anon_vma->root = anon_vma; // the two stores may be reordered vma->anon_vma = anon_vma; // finds A's anon_vma anon_vma = find_mergeable_anon_vma(vma); anon_vma_lock_write(anon_vma); // may still see the old root down_write(&anon_vma->root->rwsem); anon_vma_unlock_write(anon_vma); // see the new root, never unlock old up_write(&anon_vma->root->rwsem); thread A triggers page fault and calls __anon_vma_prepare() to prepare anon_vma for the faulting vma. __anon_vma_prepare() allocates and initializes a new anon_vma, and then publishes it to the vma with a plain store. anon_vma_prepare() only requires the mmap_lock to be held for reading, so two threads can fault on adjacent VMAs at the same time. While thread A publishes a new anon_vma, thread B could find the anon_vma via find_mergeable_anon_vma() and then locks anon_vma->root->rwsem. The store to anon_vma->root in anon_vma_alloc() and the store to vma->anon_vma can be reordered. The anon_vma_lock_write() and spin_lock() only provide acquire semantics, which do not prevent prior stores from being reordered after them. The release semantics of the corresponding spin_unlock() and anon_vma_unlock_write() come too late, the store to vma->anon_vma is already published before they take effect. As a result, thread B can observe the following order: vma->anon_vma = anon_vma; anon_vma->root = anon_vma; The anon_vma slab is SLAB_TYPESAFE_BY_RCU, so a newly allocated anon_vma may reuse memory from a previously freed one. The constructor (anon_vma_ctor) does not reset anon_vma->root, and __put_anon_vma() doesn't clear it either, so the old root value persists until anon_vma_alloc() overwrites it. If that store isn't v ---truncated---

Linux

In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: do not dissolve gigantic pages without runtime support dissolve_free_hugetlb_folio() doesn't check hstate_is_gigantic_no_runtime(h) though remove_hugetlb_folio()/ update_and_free_hugetlb_folio() silently bail for such folios, so it frees a still-listed folio and, on vmemmap restore failure, the add_hugetlb_folio() rollback corrupts the free list.

Linux

In the Linux kernel, the following vulnerability has been resolved: mm/damon/vaddr: avoid hw-driven pte updates during damon_hugetlb_mkold() damon_hugetlb_mkold() reads the page table entry into a local variable, unsets the accessed bit in the variable, and updates the page table entry with the updated variable value. If hardware updates the same page table entry in parallel, the hw updates could be lost. For example, hardware-updated dirty bits might be lost. Avoid the parallel updates by clearing the page table entry when reading it together, using huge_ptep_get_and_clear(). If a parallel write to the memory is made after the clearing, the hw will see the page table entry is cleared, trigger page fault and wait until it is handled. The page fault handling will wait for damon_hugetlb_mkold() due to the page table lock. Because hugetlbfs is an in-memory file system and hugetlb pages cannot be reclaimed, no critical issue is expected to my best knowledge. But definitely this is a nasty bug that should be fixed sooner rather than later. The issue was discovered [1] by Sashiko.

Linux

In the Linux kernel, the following vulnerability has been resolved: PCI: of_property: Omit bus properties without a subordinate bus A bridge (a device with a Type 1 header) may not have a secondary bus allocated (pdev->subordinate), e.g., if there are no available bus numbers or the bridge secondary/subordinate bus numbers are not writable. The dynamic OF helpers of_pci_prop_bus_range() and of_pci_prop_intr_map() dereference pdev->subordinate without checking it. When CONFIG_PCI_DYNAMIC_OF_NODES is enabled, this can cause a NULL pointer dereference and early boot hang. Generate 'bus-range' and 'interrupt-map' properties only when a subordinate bus exists. Keep the node and its remaining properties for bridges without one. The problem was latent since 407d1a51921e ("PCI: Create device tree node for bridge"), but wasn't reachable until 1f340724419e ("PCI: of: Create device tree PCI host bridge node"), which appeared in v6.15. Before 1f340724419e, of_pci_make_dev_node() returned early because the parent OF node was missing. [bhelgaas: move pdev->subordinate test to callees, commit log]

Linux

In the Linux kernel, the following vulnerability has been resolved: packet: use ubuf_info completion for TX_RING packets tpacket_snd sends skbs with frags pointing into its ring slots. Slots are released when skb->destructor is called. A call to skb_orphan calls skb->destructor before the skb is freed. This can cause the slot to be reused while still linked into the skb. Switch to standard zerocopy completion (ubuf_info) so the slot is only released once all references to the payload are freed or copied. Restore skb->destructor to standard sock_wfree. The ubuf_info completion callback can be called with a NULL skb, but only from net_zcopy_put and related API, used by zerocopy implementations that hold their own reference on the uarg, such as MSG_ZEROCOPY. This uarg is only ever completed from skb_zcopy_clear, so skb is always set. To prevent userspace from aliasing in-flight state on shared ring slots, allocate tpacket_uarg per packet, rather than per slot. This adds a small allocation to the transmit path. Use standard kmalloc to allow backporting to stable kernels. The uarg holds an sk_wmem_alloc reference, rather than an sk_refcnt reference. packet_free_tx_ring waits on sk_wmem_alloc before freeing the ring pages. Always allocate vec->deferred for tx_ring so page-backed rings also wait on sk_wmem_alloc when skb_copy_ubufs drops page refs before calling tpacket_ubuf_complete. Drop the tx_ring.pg_vec test that tpacket_destruct_skb performed before accessing the slot. The sk_wmem_alloc reference now guarantees that the slot is valid. The test is also not sufficient by itself, as it reads pg_vec without pg_vec_lock, so it can race with packet_set_ring. As a result a slot is released when its payload is copied, which can be before transmission (e.g., in skb_orphan_frags_rx). If copied before skb_tx_timestamp() is called, no slot timestamp is recorded, similar to when skb_orphan() was called early in the datapath before this patch. Revert the now unused previous skb_zcopy_.._nouarg infra. Depends on commit 992cc9f94ca9 ("net/packet: defer vmalloc TX_RING free until skbs finish").

Linux

In the Linux kernel, the following vulnerability has been resolved: HID: alps: unregister DualPoint Stick input device on remove alps_input_configured() allocates a second input device ("DualPoint Stick") with input_allocate_device() and registers it, but the alps_driver struct has no .remove handler and input2 is not tracked in hdev->inputs. The default remove path (hid_hw_stop -> hidinput_disconnect) only iterates hdev->inputs, so input2 is never unregistered and leaks on every device removal. Add a .remove handler that stops the device first (preventing URB callbacks from touching input2 during teardown) and then unregisters input2.

Linux

In the Linux kernel, the following vulnerability has been resolved: HID: alps: fix use-after-free on input2 registration failure alps_input_configured() stores data->input2 before calling input_register_device(). If registration fails, input_free_device() frees the input device but data->input2 still points to the freed memory. alps_input_configured() calls hid_hw_open() before allocating input2, so URBs are already active and raw_event can fire during the failure window. A U1_SP_ABSOLUTE_REPORT_ID report arriving then causes u1_raw_event() to dereference the freed data->input2 -> use-after-free. Fix by only storing input2 into drvdata after successful registration and adding a NULL guard in the raw_event path.

Linux

In the Linux kernel, the following vulnerability has been resolved: HID: hid-oxp: use cancel_delayed_work_sync() in remove oxp_hid_remove() uses cancel_delayed_work() for all three delayed work items. cancel_delayed_work() only dequeues a pending work item without waiting for a currently executing callback to finish. If any of the work callbacks (oxp_rgb_queue_fn, oxp_btn_queue_fn, oxp_mcu_init_fn) is running at the time of removal, the callback continues executing concurrently with hid_hw_close() and hid_hw_stop(), accessing the HID device after it has been closed and stopped. Use cancel_delayed_work_sync() instead to ensure that any in-progress work callback completes before device teardown proceeds.

Linux

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix OOB read in wacom_wac_pen_serial_enforce() The 'wacom_wac_pen_serial_enforce()' function may calculate and pass an invalid offset to hid_field_extract(), resulting in memory reads at incorrect addresses -- possibly beyond the end of the report. If a field in the HID descriptor lists more usages than its Report Count actually reserves space for, the function's inner 'j' will walk past the end of the field: for (i = 0; i < report->maxfield; i++) { for (j = 0; j < report->field[i]->maxusage; j++) { ... value = hid_field_extract(hdev, raw_data + 1, offset + j * size, size); A descriptor listing 12288 usages against Report Count 1 has the loop extract the usage at index 12287 from bit offset 98296 -- about 12 KB past a 2-byte received report. The value is stored in wacom_wac->serial[0] and can reach userspace as an MSC_SERIAL event, making this an information disclosure. Clamp the loop to field->report_count, the number of value slots the report holds. Value slots past the last declared usage are still scanned; they reuse that usage (HID 1.11, 6.2.2.8). Verified on v6.12.105 with a UHID reproducer: a 2-byte report from such a descriptor trips KASAN before the patch and not after it.

Linux

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix rev_entry reference leak in mlx5_tc_ct_shared_counter_get() When the reverse entry is found but its counter is already being released, refcount_inc_not_zero() fails and the reference taken by mlx5_tc_ct_entry_get() is never dropped before falling through to create_counter. Drop it so the reverse entry is not kept alive forever by a shared counter lookup that did not use it.

Linux

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: fix swapped IPv6 IPsec policy masks IPv6 XFRM policies may use different source and destination prefix lengths. mlx5e_ipsec_policy_mask() builds the corresponding masks independently, but setup_fte_addr6() installs each mask in the opposite address field. When the prefix lengths differ, this makes the source match use the destination prefix and the destination match use the source prefix. The resulting hardware rule can both miss traffic covered by the policy and match traffic outside it. Install each mask in its corresponding match field.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: airoha: npu: cancel wdt_work after releasing the WDT IRQ airoha_npu_remove() calls cancel_work_sync() on each core's wdt_work, but the watchdog IRQ that queues it is requested with devm_request_irq() and is freed only after .remove() returns. airoha_npu_wdt_handler() can therefore schedule_work() again once the cancel has returned. struct airoha_npu, which contains the work, is devm_kzalloc()'d and is freed in that same unwind, so the late work dereferences freed memory. Register the work with devm_work_autocancel() before devm_request_irq() and drop .remove(). Devres runs in reverse order, so the IRQ is freed before cancel_work_sync(), including when probe fails. A cancel left in .remove() cannot get that order. Initializing the work first also stops a pending watchdog interrupt from queuing an uninitialized work item. Probe currently calls INIT_WORK() only after devm_request_irq(). This issue was identified during our ongoing static-analysis research while reviewing kernel code.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: arp: terminate device name before lookup The ARP ioctl copies a user-provided struct arpreq into a stack object. Its arp_dev field may contain IFNAMSIZ bytes without a NUL terminator. Such input is passed to dev_get_by_name_rcu() or __dev_get_by_name(), where strcmp() can read past the end of the stack object when a matching alternative interface name exists. Terminate the field before the lookup to prevent the out-of-bounds read.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: atl1: fix soft lockup on out-of-range cmb_tpd_next_to_clean read Same issue as atl1c (see the first commit in this series, "net: atl1c: fix soft lockup on out-of-range tpd_cons read"): the hardware can report an out-of-range cmb_tpd_next_to_clean (seen as 0xffff) while the PCIe link/MAC is resetting. An out-of-range value can never be reached and the loop below would spin forever. Treat it as "nothing new to clean" instead.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: ipconfig: bound DHCP option construction ic_dhcp_init_options() appends the hostname (option 12), vendor-class (option 60) and client-ID (option 61) options into the fixed 312-byte bootp_pkt.exten[] buffer. Only the client-ID branch checked the remaining space; the hostname and vendor-class writes were unbounded. A 64-byte hostname together with the maximum 252-byte dhcpclass= identifier needs 18 + (2 + 64) + (2 + 252) = 338 of the 312 available bytes even before the terminating END marker, so the vendor-class memcpy runs past the end of exten[]. With CONFIG_FORTIFY_SOURCE this is reported as a field-spanning write and, when the kernel is booted with panic_on_warn=1, aborts boot with a panic. Route the optional options through a common helper that makes sure the option, its 2-byte header and the END marker all fit and drops an option that would not. Configurations with short options keep sending exactly the same bytes as before.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: macb: fix dma_alloc_coherent() leak on macb_alloc() error paths Fix 3 leaks in macb_alloc() error paths: - Tx buffer allocated but crossing a 4G boundary: Tx leaked. - Rx buffer allocation fails: Tx leaked. - Rx buffer allocated but crossing a 4G boundary: Tx & Rx leaked. This is because our error handling calls macb_free(bp) which in turn frees the buffers stored in bp->queues[0], but nothing has been stored in there. Fix by storing allocated buffers into bp->queues[0] ASAP.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: conntrack: avoid modifying shared unconfirmed ct entry In a case where skb with an unconfirmed ct entry gets cloned, we may end up committing both but with different sets of extensions. The series of events: 1. The first clone wants to commit and runs the helpers wiring up the extension pointer into the expectation list. 2. Then it looses the confirmation keeping the entry unconfirmed. 3. Second clone now wants to commit labels and adds the new extension for that breaking the pointer in the expectation list causing UAF on the destruction path later. While this is possible to trigger, there should be no practical network pipeline where committing both clones without modifications into the same zone is needed. So, let's just reset the entry in case for some reason we got an skb with a shared one during commit. This doesn't affect any known use cases, but avoids any potential problems with sharing and modification of the unconfirmed ct entry. The fixes tag points to the introduction of helpers, since that's the main UAF trigger for the sharing.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: conntrack: fix helper UAF due to extensions realloc While calling the helpers, a raw pointer to the extensions area is wired into expectations list: -> nf_ct_helper() -> helper->help() -> nf_ct_expect_related_report() -> nf_ct_expect_insert() -> hlist_add_head_rcu(&exp->lnode, &master_help->expectations) In case the connection is not confirmed yet, more extensions can be added afterwards with *_ext_add() calls reallocating the extension space and leaving the now invalid pointer in the expectations list that is later accessed while removing the expectation. Make sure that helpers are called at the end after all the other extensions are already added. Note that the helper rejection now leaves the mark and labels set, but that's not different from how the NAT was handled before or how the mark and the labels were handled on confirmation failure. And there are no atomicity guarantees provided by the API anyway.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: atl1c: fix soft lockup on out-of-range tpd_cons read The hardware can report an out-of-range tpd_cons (seen as 0xffff) while the PCIe link/MAC is resetting. An out-of-range value can never be reached and the loop below would spin forever. To avoid a soft lockup treat it as "nothing new to clean" instead. Reproduced on two machines, same NIC (Qualcomm Atheros AR8151 v2.0, 4-port), triggered by rebooting a Mikrotik CCR2004 PCIe card that the ports are directly linked to: - Ubuntu 26.04.1 LTS, kernel 7.0.0-31-generic. The link-flap precursor, before the lockup was captured with a full trace elsewhere: atl1c 0000:05:00.0 enp5s0f0: NETDEV WATCHDOG: CPU: 4: transmit queue 2 timed out 489984 ms atl1c 0000:05:00.0: MAC state machine can't be idle since disabled for 10ms second atl1c 0000:05:00.0: atl1c: enp5s0f0 NIC Link is Up<65535 Mbps Full Duplex> 65535 (0xffff) here is the same value tpd_cons reads back once the loop below gets stuck. - Proxmox VE, kernel 7.0.14-11-pve. Same NIC/trigger, this time caught by the soft lockup watchdog with a full stack trace: watchdog: BUG: soft lockup - CPU#12 stuck for 354s! [napi/eth%d-0:329] CPU: 12 UID: 0 PID: 329 Comm: napi/eth%d-0 Tainted: P O L 7.0.14-11-pve #1 PREEMPT(lazy) RIP: 0010:atl1c_clean_tx+0x142/0x2d0 [atl1c] Call Trace: <TASK> __napi_poll+0x32/0x1e0 napi_threaded_poll_loop+0x286/0x2e0 napi_threaded_poll+0xfd/0x140 kthread+0xf7/0x130 ret_from_fork+0x2da/0x3a0 ret_from_fork_asm+0x1a/0x30 </TASK>

Linux

In the Linux kernel, the following vulnerability has been resolved: net: atl1e: fix soft lockup on out-of-range hw_next_to_clean read Same issue as atl1c (see the first commit in this series, "net: atl1c: fix soft lockup on out-of-range tpd_cons read"): the hardware can report an out-of-range hw_next_to_clean (seen as 0xffff) while the PCIe link/MAC is resetting. An out-of-range value can never be reached and the loop below would spin forever. Treat it as "nothing new to clean" instead.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: bridge: mdb: restart port group walk after deletion br_mdb_flush_pgs() keeps a pointer-to-pointer cursor while walking mp->ports. br_multicast_del_pg() can re-enter the same MDB entry through br_multicast_sg_del_exclude_ports() and unlink other port groups. If the cursor points into one of those groups, the next iteration dereferences a stale cursor and can leave mp->ports pointing at freed memory. A following RTM_GETMDB exposes the dangling pointer: BUG: KASAN: slab-use-after-free in br_mdb_dump Read of size 8 br_mdb_dump rtnl_mdb_dump rtnl_dumpit netlink_dump Reset the cursor to mp->ports after every deletion. The deletion removes at least the selected group, so the restarted walk always makes progress.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: ena: fix MMIO read buffer leak on probe failure ena_device_init() initializes the MMIO read mechanism with ena_com_mmio_reg_read_request_init(), which allocates a coherent DMA buffer for MMIO read responses. The normal removal path releases this buffer through ena_com_mmio_reg_read_request_destroy(). However, if ena_probe() fails after ena_device_init() succeeds, the error path destroys the admin resources and eventually frees ena_dev without destroying the MMIO read request, leaving the coherent DMA buffer allocated. Call ena_com_mmio_reg_read_request_destroy() in the probe error path before releasing the remaining device resources. This issue was found by manual code inspection.

Linux

In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6t_rt: fix zero-address non-strict match out-of-bounds read rt_mt6_check() permits rules to be configured with rtinfo->addrnr == 0 even when address matching (IP6T_RT_FST_MASK) is requested. In the IP6T_RT_FST_NSTRICT path, rt_mt6() evaluates packet routing addresses against rtinfo->addrs[i] and terminates backwards at the bottom of the loop: if (ipv6_addr_equal(ap, &rtinfo->addrs[i])) { i++; } if (i == rtinfo->addrnr) break; When addrnr is 0, if the first packet address matches rtinfo->addrs[0], i is incremented to 1. Because i is now strictly greater than addrnr (0), the loop termination condition (i == rtinfo->addrnr) is bypassed and will never be satisfied. If a crafted IPv6 packet contains matching routing addresses, i will advance past IP6T_RT_HOPS (16). The subsequent call to ipv6_addr_equal() reads beyond struct ip6t_rt, triggering UBSAN/KASAN out-of-bounds warnings or kernel panics. Fix this by: 1. Rejecting rules in rt_mt6_check() where IP6T_RT_FST_MASK is set but rtinfo->addrnr is zero. 2. In rt_mt6(), moving the termination condition (i < rtinfo->addrnr) into the for-loop header condition and removing the backwards break at the end of the loop body.

Linux

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: skip expired catchall elements on insert and delete nft_setelem_catchall_insert() looks up duplicates with nft_set_elem_active() only, while nft_set_catchall_lookup() and the dump path additionally skip expired elements. Once a catchall element with a timeout expires, this predicate drift makes it invisible to userspace dumps, yet it still blocks re-insertion: with NLM_F_EXCL the request fails with -EEXIST, and without it the request reports success but silently inserts nothing. The stale entry only goes away when the (user-tunable) gc interval elapses, so the catchall rule may silently stop matching for an arbitrarily long time after its first expiration. The delete path shows the same drift: nft_setelem_catchall_deactivate() picks the first active-next entry in the catchall list, so with an expired entry still pending GC it retires the stale entry instead of the fresh one, and it deactivates an element that userspace no longer sees instead of failing with -ENOENT. Align both walks with the lookup and dump predicates: only an element that is active and not expired counts as a duplicate or delete candidate, using the per-netns timestamp taken at transaction start, in line with the set backend .insert/.deactivate and catchall GC sync paths.

Linux

In the Linux kernel, the following vulnerability has been resolved: nfc: fix use-after-free in nfc_get_local_general_bytes Commit 6709d4b7bc2e ("net: nfc: Fix use-after-free caused by nfc_llcp_find_local") attempted to fix a use-after-free (UAF) issue by invoking nfc_llcp_local_put(local) after accessing local->gb. However, if the reference count drops to zero, local is freed immediately, leading to a use-after-free when callers access the returned pointer. Alternative approaches using dynamic allocation (e.g. kmemdup) introduced memory leaks because callers consistently treat the returned pointer as borrowed memory. Fix this properly by refactoring nfc_llcp_general_bytes() and nfc_get_local_general_bytes() to accept a caller-provided output buffer (out_gb) and its maximum length (gb_max_len). The general bytes are safely copied into out_gb before calling nfc_llcp_local_put(local), ensuring safe lifetime management without ownership transfer complications. Update all callers across drivers (microread, pn533, pn544, st21nfca, digital_dep, and nci) to provide their own destination buffers and pass them to nfc_get_local_general_bytes().

Linux

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: drop truncated I/RR/RNR PDUs in nfc_llcp_recv_hdlc() nfc_llcp_recv_hdlc() reads the sequence byte skb->data[2], via nfc_llcp_ns()/nfc_llcp_nr(), before any length check. The receive path only guarantees the two-byte LLCP header -- __nfc_llcp_recv() checks it with pskb_may_pull() and nfc_llcp_recv_agf() admits two-byte inner PDUs -- so a two-byte I, RR or RNR PDU reads one byte of uninitialised skb tailroom. The byte becomes N(R)/N(S); a peer can already set those with a well-formed PDU, so this is acting on uninitialised memory, not new peer control. Guard the read with pskb_may_pull(), as commit 95674f506c63 ("nfc: llcp: reject PDUs shorter than the LLCP header") did for the two-byte header, so the sequence byte is present and linear before it is read. RR and RNR PDUs are LLCP_HEADER_SIZE + LLCP_SEQUENCE_SIZE bytes and an I PDU is longer, so no valid frame is rejected; a truncated PDU is malformed, so return without a DM reply.

Linux

In the Linux kernel, the following vulnerability has been resolved: nfc: port100: reject frames whose declared length exceeds the received data port100_recv_response() passes the URB transfer buffer to port100_rx_frame_is_valid(), which checksums le16_to_cpu(frame->datalen) bytes of frame->data. datalen is a 16-bit field supplied by the device and is never checked against the number of bytes actually received (urb->actual_length), so a device reporting a datalen larger than the received frame makes port100_data_checksum() read out of bounds past the transfer buffer. Reject a response whose declared frame size does not fit the received length before validating it. Found by 0sec (https://0sec.ai) using automated source analysis; the missing bound is evident from source. Compile-tested.

Linux

In the Linux kernel, the following vulnerability has been resolved: nfc: trf7970a: power down on startup RX gain failure trf7970a_startup() powers up the device before applying the optional RX gain reduction. If the register read or write fails, it returns without undoing that power-up. Probe's unwind only drops the separate regulator references acquired by probe, leaving the additional VIN enable from startup unbalanced. The system resume caller also has no power-down on this error. Call trf7970a_power_down() before returning the RX gain error to deassert the enable GPIOs, release the startup VIN reference and restore the powered-off state. Runtime PM has not been enabled yet, so the full shutdown helper is not appropriate here. Preserve the original SPI error. This issue was identified during our ongoing static-analysis research while reviewing kernel code.

Linux

In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi_tcp: Check the data direction of a Data-In PDU The Data-In branch of iscsi_tcp_hdr_dissect() resolves the ITT to a task and copies the PDU's data segment into that command's scatterlist without asking whether the command was reading. iscsi_tcp_r2t_rsp() in the same file does ask, and rejects an R2T for a command that is not DMA_TO_DEVICE. A target that answers a WRITE command's ITT with a Data-In therefore has the initiator write target-supplied bytes into the pages that write was about to send. Those are the caller's own pinned pages for an O_DIRECT write, and page cache pages for a buffered one. Observed against a test target that emits one 512-byte Data-In naming a 128 KB write's ITT, after the R2T for that write. With O_DIRECT the caller's buffer ends up holding 512 bytes of the target's data while pwrite() returns 131072. Buffered is quieter: pwrite() and fsync() both succeed, nothing is logged, and reading those blocks back returns the target's bytes out of the page cache without a command going on the wire. Check the direction before using the scatterlist, the way the R2T path already does.

Linux

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Keep internal commands dispatchable during error handling Commit 08b12cda6c44 ("scsi: ufs: core: Switch to scsi_get_internal_cmd()") switched UFS internal commands to allocate requests on hba->host->pseudo_sdev->request_queue, which shares the host tagset with regular LUNs. During error recovery, ufshcd_err_handling_prepare() calls blk_mq_quiesce_tagset(&hba->host->tag_set), marking all queues in the tagset as quiesced, including pseudo_sdev->request_queue. When ufshcd_verify_dev_init() subsequently issues internal commands (e.g. NOP OUT UPIU) via blk_execute_rq(), blk_mq_run_hw_queue() skips running the quiesced queue, resulting in an unrecoverable circular wait deadlock. Keep quiescing the tagset and unquiesce the pseudo SCSI device on top of that, so internal commands stay dispatchable while the logical units remain quiesced. Re-quiesce the pseudo device before unquiescing the tagset so that quiesce_depth stays balanced. Clock scaling and ufshcd_pause_command_processing() are unaffected: they keep quiescing the whole tagset, internal commands included.

Linux

In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix NULL pmu_ctx passed to pmu->sched_task() perf_pmu_sched_task() returns early when cpuctx->task_ctx is set, and cpc->task_epc is only non-NULL while a task context is scheduled in on this CPU. __perf_pmu_sched_task() therefore always passes NULL: Unable to handle kernel NULL pointer dereference at virtual address 00 pc : armv8pmu_sched_task+0x14/0x50 Call trace: armv8pmu_sched_task+0x14/0x50 (P) perf_pmu_sched_task+0xac/0x108 __perf_event_task_sched_out+0x6c/0xe0 Pass &cpc->epc instead, the CPU-wide context for this PMU, which the function already dereferences a few lines up to find pmu. armv8pmu_sched_task() is the only in-tree implementation that dereferences the argument, and it only reads ->pmu, so the oops needs BRBE, added in v6.17.

Linux

In the Linux kernel, the following vulnerability has been resolved: s390/cio: Fix NULL pointer dereference in ccw_device_get_util_str() The channel path registry entry associated with a CHPID may be removed while the subchannel's PMCW still references that CHPID. In this case, chpid_to_chp() can return NULL, leading to a NULL pointer dereference. Add the missing NULL check before dereferencing the returned pointer.

Linux

In the Linux kernel, the following vulnerability has been resolved: s390/cmf: Fix virtual vs physical address confusion The measurement block address is an absolute address. Define the associated schib_config and schib fields as dma64_t to enable automatic detection of incorrect assignments. Also add the missing virt_to_dma64() translation. Without this fix, a wrong address will be used by firmware when storing extended format channel measurement data on kernels built with CONFIG_RANDOMIZE_IDENTITY_BASE=y.

Linux

In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix missing device lock in zpci_report_status() When pdev is non-NULL, zpci_report_status() accesses the device's driver. To get a consistent state matching the recovery, the device lock needs to be held. Do so by expanding the existing device lock critical section. The lock only needs to be held when the pdev is non-NULL, so extract the pdev-specific reporting into a helper function which also adds a lockdep assertion to detect calls without the device lock held.

Linux

In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: fix KVM GISC and page leak when queue removed from host config Three related problems exist in the handling of KVM interrupt and page resources when a queue is removed from the host's AP configuration while assigned to a mediated device (mdev). Problem 1: ~~~~~~~~~ AP_RESPONSE_Q_NOT_AVAIL not handled in vfio_ap_mdev_reset_queue() When the AP bus removes a queue device whose adapter or domain has been removed from the host's AP configuration, vfio_ap_mdev_remove_queue() is called. If the queue is still in the host's AP configuration at that point, it calls vfio_ap_mdev_reset_queue(), which issues a PQAP(ZAPQ). Since the adapter is already gone from the host configuration, ap_zapq() returns AP_RESPONSE_Q_NOT_AVAIL (0x01). This response code is not handled in vfio_ap_mdev_reset_queue()'s switch statement and falls through to the default case, which issues a WARN but does not call vfio_ap_free_aqic_resources(). As a result, if IRQ handling was enabled for the queue by the guest, the KVM GISC registration and the pinned guest page holding the notification indicator byte (NIB) are both leaked. This is fixed by adding AP_RESPONSE_Q_NOT_AVAIL to the same case as AP_RESPONSE_DECONFIGURED and AP_RESPONSE_CHECKSTOPPED in vfio_ap_mdev_reset_queue(). Like those response codes, Q_NOT_AVAIL indicates the queue is not operational and no further reset attempts are possible; the correct action is to free the IRQ resources immediately. Problem 2: ~~~~~~~~~ AP_RESPONSE_Q_NOT_AVAIL not handled in apq_status_check() In vfio_ap_mdev_reset_queue(), there are four cases that indicate a queue reset has not yet completed, in which case apq_reset_check() is queued to a work queue to verify completion of the reset operation. This function uses the PQAP(TAPQ) function to get the queue's status and calls apq_status_check() to verify whether the reset has completed, failed or needs to be executed again. As described in Problem #1 above, apq_reset_check() does not specifically check for AP_RESPONSE_Q_NOT_AVAIL, thereby potentially leaking KVM GISC registration and the pinned guest page holding the NIB. This is fixed by adding a case statement for AP_RESPONSE_Q_NOT_AVAIL to apq_status_check() and returning -ENODEV for that case. The caller, apq_reset_check() will then check for this return code and call vfio_ap_free_aqic_resources() to prevent the leak. Problem 3: ~~~~~~~~~ vfio_ap_free_aqic_resources() leaks saved_isc when kvm is NULL vfio_ap_free_aqic_resources() guards the call to kvm_s390_gisc_unregister() with: if (q->saved_isc != VFIO_AP_ISC_INVALID && !WARN_ON(!(q->matrix_mdev && q->matrix_mdev->kvm))) If matrix_mdev->kvm is NULL -- which can happen when vfio_ap_mdev_unset_kvm() has already run and cleared kvm before a subsequent cleanup path reaches this function -- the WARN_ON fires and the entire block is skipped. This leaves q->saved_isc set to a non-invalid value, creating a potential double-free on any subsequent call to this function. When kvm is NULL the KVM guest is already torn down, so kvm_s390_gisc_unregister() need not and cannot be called; however, q->saved_isc must always be cleared. Fix this by separating the kvm_s390_gisc_unregister() call from the q->saved_isc reset. The WARN_ON now guards only the genuinely impossible case of matrix_mdev being NULL. A NULL kvm is handled gracefully by skipping only the unregister call, and q->saved_isc = VFIO_AP_ISC_INVALID is set unconditionally whenever saved_isc was not already invalid. Additionally, add an else clause to the host-config check in vfio_ap_mdev_remove_queue() to call vfio_ap_free_aqic_resources() directly when the queue is not in the host's AP configuration. This serves as a backstop: when the AP bus fires the driver .remove callback after an adapter is removed from the host config, the queue is by definition no longer addressable, so vfio_ap_mdev_reset_queue ---truncated---

Linux

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Free have_run_cpus during VM destruction even if VM is no longer SEV Unconditionally free SEV's "have run CPUs" cpumask in the VM destroy path, i.e. even for what appear to be non-SEV VMs, as an SEV VM becomes a non-SEV VM if its state is intra-host migrated. Alternatively, the mask could be freed in sev_migrate_from() when "converting" the source VM, but that gets annoying because ideally KVM would nullify the mask to guard against UAF, and nullifying the mask would need be conditioned on CPUMASK_OFFSTACK=y. Freeing the mask during sev_migrate_from() is also not robust against other KVM bugs, though that's kind of a moot point since any such bugs would show up even if sev->active is never set. I.e. KVM must get that side of things correct. But, that's not a great reason to add more code just to make things marginally less robust.

Linux

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Do cache maintenance on the source VM during intra-host migration Manually perform cache maintenance on the source VM during intra-host migration to ensure no stale data is left in CPU caches after the VM is destroyed. Because the source VM is "converted" to a non-SEV VM, KVM's memory reclaim flows won't trigger cache maintenance, e.g. when all guest memory is reclaimed in response to detaching from the mmu_notifier. Note, relying on the destination VM to do cache maintenance isn't an option as KVM doesn't require identical guest memory configurations, i.e. the source VM may have access to memory that the destination VM does not. Enforcing equivalent memory configurations is infeasible, as it would require a *deep* comparison of memslots, e.g. to verify that not only are the memslot identical, but what the memslots point at is also identical.

Linux

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Don't WARN on an unknown VM ioctl in protected mode kvm_pkvm_ioctl_allowed() WARNs when kvm_get_cap_for_kvm_ioctl() doesn't find the ioctl number in vm_ioctl_caps[], and kvm_arch_vm_ioctl() calls it for every number the generic code doesn't handle, so ioctl(vm_fd, 0xdeadbeef) from userspace taints a pKVM host and panics it under panic_on_warn. The lookup is fed userspace input: return false, and userspace gets the -EINVAL kvm_arch_vm_ioctl() returns for that number on a host without pKVM.

Linux

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix AArch32 DBGBXVR<n> handling The consolidation of the breakpoint and watchpoint register accessors switched DBGBXVR<n> from trap_bvr() to trap_dbg_wb_reg(). The latter selects backing storage with demux_wb_reg(), which only handles Op2 values 4 through 7. Since DBGBXVR<n> uses Op2 1, an AArch32 guest access hits KVM_BUG_ON() and marks the VM dead. DBGBXVR<n> aliases DBGBVR<n>_EL1[63:32], and its AA32(HI) descriptor already selects the upper half. Map Op2 1 to dbg_bvr[] alongside Op2 4, restoring the pre-regression behavior.

Linux

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix spurious warning for benign stage 2 teardown race kvmtool was used to establish an L1 guest with 8 CPUs and 8 GiB of RAM, an L2 guest with 4 CPUs and 4 GiB of RAM and an L3 guest with 2 CPUs and 2 GiB of RAM, all of which was then exited. Under memory pressure in the L0 host warnings were observed due to migration triggered by compaction: WARNING: arch/arm64/kvm/mmu.c:336 at __unmap_stage2_range+0x64/0x80, CPU#5: kcompactd0/66 Which was, in turn, triggered by an MMU notifier for the host invalidation: mmu_notifier_invalidate_range_start() -> ... -> kvm_mmu_notifier_invalidate_range_start() -> kvm_mmu_unmap_gfn_range() -> kvm_unmap_gfn_range() -> kvm_nested_s2_unmap() -> kvm_stage2_unmap_range() -> __unmap_stage2_range() -> stage2_apply_range() <- -EINVAL, triggering a WARN_ON() Racing with L0's teardown of stage 2 page tables: exit_mm() -> mmput() -> __mmput() -> exit_mmap() -> mmu_notifier_release() -> ... -> kvm_mmu_notifier_release() -> kvm_flush_shadow_all() -> kvm_arch_flush_shadow_all() -> kvm_free_stage2_pgd() -> [ acquire kvm->mmu_lock for write ] -> mmu->pgt = NULL [ among other tasks ] -> [ release kvm->mmu_lock for write ] It turns out there is a benign race resulting in a spurious warning: Thread A - notify: migration | Thread B - notify: release -------------------------------|--------------------------------- < kvm->mmu_lock held > | stage2_apply_range() | get mmu->pgt, check !NULL | ... | kvm_arch_flush_shadow_all() cond_resched_rwlock_write(); | < contend, sleep kvm->mmu_lock > < drop kvm->mmu_lock > | < acquire kvm->mmu_lock> | ... | kvm_free_stage2_pgd() | mmu->pgt = NULL | < invalidate MMU > | ... | < release kvm->mmu_lock > [ scheduled ] | stage2_apply_range() | < loop to next > | get, mmu->pgt, check !NULL | is NULL, return -EINVAL | __unmap_stage2_range() | WARN_ON(-EINVAL) <--- entirely spurious - the race was handled correctly. Fix the spurious warning by updating stage2_apply_range() to no longer treat concurrent PGT teardown on lock release as an error - whether the walker is tearing down page tables or doing something else this is a legitimate reason to abort the operation without error. This keeps the warning in place for all other circumstances. In practice only __unmap_stage2_range() actually does anything with the error so this only impacts that.

Linux

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Fix null ptr deref on nested wp/unmap, teardown race Commit 7270cc9157f4 ("KVM: arm64: nv: Handle VNCR_EL2 invalidation from MMU notifiers") introduced VNCR_EL2 invalidation in both kvm_nested_s2_unmap() and kvm_nested_s2_wp(). However at the point of this being performed concurrent stage 2 teardown of a nested guest can cause kvm->arch.mmu.pgt to be set to NULL. This happens in kvm_flush_shadow_all() -> kvm_arch_flush_shadow_all() -> kvm_free_stage2_pgd() and is performed under the kvm->mmu_lock. Commit ec14c272408a ("KVM: arm64: nv: Unmap/flush shadow stage 2 page tables") introduced the teardown of the entire nested MMU range, which then invokes stage2_apply_range() with resched=true: mmu_notifier_invalidate_range_start() -> ... -> kvm_mmu_notifier_invalidate_range_start() -> kvm_mmu_unmap_gfn_range() -> kvm_unmap_gfn_range() -> kvm_nested_s2_unmap() -> kvm_stage2_unmap_range() -> __unmap_stage2_range() -> stage2_apply_range() This means that stage2_apply_range() can drop the kvm->mmu_lock and thus concurrent progress can be made in lockstep with kvm_arch_flush_shadow_all(). If kvm_arch_flush_shadow_all() advances ahead of stage2_apply_range() and completes its operation it guarantees a NULL pointer deref. Since kvm_free_stage2_pgd() is performed under the kvm->mmu_lock this will either be observed NULL or not and serialised against kvm_free_stage2_pgd(). Resolve the issue by abstracting the invalidation to a new function, kvm_invalidate_vncr_ipa_all(), and check that the pgt is non-NULL before dereferencing it.

Linux

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Transfer the hyp stack pages out of the host stage-2 fix_host_ownership() walks only the linear-map alias of each memblock region, and the per-CPU hyp stack, mapped in the private VA range for its guard page, has none. Walk each stack's VA range with the same walker.

Linux

In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Serialize IMSIC attributes with vCPU migration KVM device ioctls are not serialized against KVM_RUN. As a result, kvm_riscv_aia_imsic_rw_attr() can snapshot the physical CPU and HGEI of an IMSIC VS-file before a concurrent vCPU migration releases it. The HGEI can then be allocated to another vCPU before imsic_vsfile_rw() uses the stale tuple. A GET or SET attribute may consequently access the new owner's interrupt file. Serialize the entire IMSIC attribute operation with the target vCPU mutex. This prevents the VS-file from being migrated and recycled until the attribute access completes. Acquire the mutex killably so that the device ioctl remains interruptible while waiting for KVM_RUN to finish.

Linux

In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Synchronize hrtimer callback during teardown The non-Sstc hrtimer callback clears next_set before its final uses of the enclosing vCPU. If teardown observes next_set as false while the callback is still running, kvm_riscv_vcpu_timer_cancel() skips hrtimer_cancel() and kvm_destroy_vcpus() can free the vCPU before the callback enters kvm_riscv_vcpu_set_interrupt(). A guest can arm the timer with SBI TIME and request shutdown with SBI legacy shutdown or SRST. A VMM that honors KVM_EXIT_SYSTEM_EVENT and destroys the VM supplies the teardown side of the race; no post-launch host ioctl is needed to arm or request teardown. On upstream master 62cc90241548, generic KASAN reported: BUG: KASAN: slab-use-after-free in do_raw_spin_lock Write of size 4 at addr ff60000005e58898 kvm_riscv_vcpu_set_interrupt kvm_riscv_vcpu_hrtimer_expired __hrtimer_run_queues hrtimer_interrupt The object was allocated by KVM_CREATE_VCPU and freed concurrently by: kvm_destroy_vcpus kvm_arch_destroy_vm kvm_destroy_vm __fput For deterministic validation, I added mdelay(1000) immediately after the existing next_set = false assignment. This only widens the existing post-clear callback window. A no-delay trace build naturally reached the callback-after-teardown-start/before-deinit ordering in 12 of 200 runs, but 1,500 stock-kernel stress iterations did not produce a KASAN report, so natural reproduction is timing-sensitive. Always invoke hrtimer_cancel() for an initialized timer. Preserve the existing -EINVAL result when the timer is no longer set, but only after synchronizing with a running callback. With this patch, hrtimer_cancel() blocked for the full widened callback window before vCPU destruction. KASAN reported no error in 100 fixed-and-widened runs or 200 fix-only timing-sweep runs.

Linux

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Derive SCX_RQ_IN_WAKEUP from the core enqueue flags schedule_deferred_locked() skips scheduling a deferred action while SCX_RQ_IN_WAKEUP is set and relies on the task_woken_scx() call that follows a wakeup enqueue to run it. enqueue_task_scx() sets the flag from the merged enqueue flags, which include the flags stashed for a remote activation. move_remote_task_to_local_dsq() thus sets SCX_RQ_IN_WAKEUP on the destination rq when the moved task was woken up, although no task_woken_scx() follows that activation. An IMMED insert into a busy destination requests a local reenqueue during that enqueue. The request gets linked but not scheduled and stays pending until an unrelated wakeup or preemption on that CPU runs the deferred actions. The IMMED task sits behind the running task in the meantime. If nothing runs them before the scheduler is disabled, the request outlives the scheduler and points into its freed per-cpu area, which the next scheduler dereferences from run_deferred(). Test the core enqueue flags for the wakeup bit. Only the core's wakeup path is followed by task_woken_scx().

Linux

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: fix CIS hold ownership on reuse Commit 69997d50ec57 ("Bluetooth: ISO: handle bound CIS cleanup via hci_conn") made hci_bind_cis() and hci_connect_cis() return a connection with one hold for the ISO layer. hci_bind_cis() currently takes that hold only after configuring a CIS, so its BT_CONNECTED and matching BT_BOUND paths return a bare lookup result. Its configuration failure path can likewise call hci_conn_drop() before taking a hold. Take the hold before any state-dependent return or configuration error so every successful return follows the documented ownership contract and every error drop is balanced. hci_connect_cis() also assumes hci_conn_link() always takes a new CIS hold before dropping the one returned by hci_bind_cis(). However, the helper returns an existing link without taking another hold. In that case, preserve the CIS hold for the caller and drop the redundant LE hold because the existing link already owns its parent hold. Returning early also avoids changing an existing CIS back to BT_CONNECT.

Linux

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: validate event length before filtering is_filtered_packet() reads the event code from skb->data[0] without first checking that the skb is nonempty. When an opcode filter is configured, it also reads the command opcode at offsets 3 or 4 without checking that a Command Complete or Command Status event is long enough. hci_send_to_sock() invokes the filter before hci_event_packet() validates the event header. A malformed event supplied by a controller or a vhci device can therefore cause an out-of-bounds read. Keep the unmasked event code for the opcode checks. The masked value is needed for the 64-bit event bitmap, but using it to identify command events aliases event codes above 0x3f. In particular, Synchronous Train Complete (0x4f) was treated as Command Status (0x0f) even though its payload has no opcode. Reject actual command events that are too short for the field being inspected. A truncated command event cannot match a configured opcode.

Linux

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: reject out-of-range OCF values The raw HCI socket security filter has 128 OCF bits per supported OGF, but masks the 10-bit OCF with 127 before looking up the command. An unprivileged socket can therefore submit a reserved OCF that aliases an allowlisted command modulo 128. A conforming controller should reject reserved opcodes. Nevertheless, the security decision must apply to the opcode that will actually be sent, especially since controller-specific behavior is outside the host stack's control. Reject OCF values that cannot be represented by the security filter instead of aliasing them onto an unrelated command.

Linux

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: balance the parent hold in hci_bind_bis() hci_conn_link() takes a lifetime reference to its parent with hci_conn_get(), but only takes an operational hold on the child. hci_conn_unlink() later balances both a hold and a reference on the parent. The SCO and CIS paths pass a parent acquired from a connect helper, so it already has a hold. For an additional BIS, hci_bind_bis() obtains the parent from hci_conn_hash_lookup_big(), which returns a bare pointer. Unlinking the child then drops the parent's existing hold and can schedule it for disconnection while its socket is still using it. Take a hold on the parent before linking it and drop that hold if linking fails. A successful link transfers the hold to hci_conn_unlink().

Linux

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: release unused CIS holds after channel attach hci_bind_cis() and hci_connect_cis() return one hci_conn hold for the ISO layer. A new channel association consumes that hold, which is eventually released by iso_conn_free(). There are two cases where iso_chan_add() does not create an association: it returns success when the socket is already attached to the same iso_conn, and it returns -EBUSY when another socket is attached. The hold returned for the current call is unused in both cases. This occurs when deferred setup calls iso_connect_cis() again for its existing socket, or when another socket attempts to reuse the CIS. Detect the idempotent case while the connection is locked and release the unused hold after iso_chan_add(). Also release it on -EBUSY. Do not drop it for other errors: a newly allocated iso_conn releases the transferred hold when its last temporary reference is put.

Linux

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: validate frame length before control and FCS access l2cap_data_rcv() unpacks either a two-byte or four-byte control field without first ensuring that it is present. A short ERTM or streaming-mode frame can therefore cause an out-of-bounds read. There is a second short-frame case when CRC16 is enabled. After the control field is pulled, l2cap_check_fcs() subtracts two from skb->len without checking it. If fewer than two bytes remain, the subtraction wraps; skb_trim() leaves the buffer unchanged and the subsequent FCS load reads past the logical end of the frame. Validate that the frame contains both its control field and, when enabled, its FCS before either field is accessed.

Linux

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: fix race in read_unconf_index_list() read_unconf_index_list() counts unconfigured controllers before allocating its response, then checks the device flags again while filling it. hci_dev_list_lock stabilizes list membership, but it does not serialize the per-device flags. During asynchronous controller setup, the worker can set HCI_UNCONFIGURED and clear HCI_SETUP between the two passes. A controller omitted from the allocation count can then become eligible for the fill pass, causing an out-of-bounds write to rp->index[]. Allocate space for every device on hci_dev_list. Since list membership cannot change while hci_dev_list_lock is held, the response remains large enough regardless of flag transitions. The reported count and response length still include only eligible unconfigured controllers.

Linux

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: fix NULL dereference of dlc->session in RFCOMM_CONNINFO The RFCOMM_CONNINFO getsockopt handler accepts a socket that is not connected as long as deferred setup is enabled: if (sk->sk_state != BT_CONNECTED && !rfcomm_pi(sk)->dlc->defer_setup) { err = -ENOTCONN; break; } l2cap_sk = rfcomm_pi(sk)->dlc->session->sock->sk; dlc->defer_setup is set in rfcomm_sock_init() when rfcomm_connect_ind() creates a child socket for an incoming connection on a listening socket that has BT_DEFER_SETUP enabled. It is never cleared afterwards. The session, however, can go away underneath it. rfcomm_recv_disc() forces the dlc state before tearing it down: d->state = BT_CLOSED; __rfcomm_dlc_close(d, err); The RFCOMM_DEFER_SETUP early return in __rfcomm_dlc_close() only covers BT_CONNECT, BT_CONFIG, BT_OPEN and BT_CONNECT2, so with the state already BT_CLOSED that switch does not match and the function falls through to rfcomm_dlc_unlink(), which sets d->session = NULL, while d->defer_setup stays 1. A getsockopt(SOL_RFCOMM, RFCOMM_CONNINFO) on the accepted socket after that point therefore skips the -ENOTCONN path -- sk->sk_state is BT_CLOSED, but dlc->defer_setup is still set -- and dereferences the NULL session. No race is needed: once the DISC has been processed, the dereference is unconditional. Reproduced on a KASAN kernel under QEMU with a BR/EDR peer emulated over /dev/vhci: the peer brings up an ACL link, opens L2CAP on the RFCOMM PSM, starts a session and sends SABM for a channel bound with BT_DEFER_SETUP, and sends DISC for that dlci after the socket has been accepted. getsockopt(SOL_RFCOMM, RFCOMM_CONNINFO) on the accepted socket then hits: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 UID: 0 PID: 150 Comm: init Tainted: G B 7.3.0-rc3-g5dd1818b15d9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:rfcomm_sock_getsockopt+0x529/0x780 Call Trace: <TASK> do_sock_getsockopt+0x3ad/0x7d0 __sys_getsockopt+0x10e/0x1b0 __x64_sys_getsockopt+0xc2/0x160 do_syscall_64+0xda/0x4b0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> 0x10 is the offset of sock in struct rfcomm_session; rfcomm_sock_getsockopt_old() is inlined into rfcomm_sock_getsockopt(). Commit 43a556b2fd43 ("Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept") fixed the same "a remote DISC clears the session while deferred setup is still flagged" problem in rfcomm_dlc_accept(); this is the remaining instance of it, in the getsockopt path. Deferred setup only leaves a socket usable here once it has reached BT_CONNECT2, so restrict the exception to that state and check that a session is actually present before following it.

Linux

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix create context out-of-bounds reads smb2_parse_contexts() validates the complete create-context area but does not limit each record to its Next field before dispatching it. A malformed chain can therefore expose bytes beyond the current context to a handler. The QFid handler also used a full response-structure cast although it only reads DiskFileId. The SMB2/SMB3 lease parsers made the same layout assumption: they read LeaseState and LeaseFlags at canonical offsets rather than at DataOffset. A valid non-canonical DataOffset could therefore yield unrelated in-bounds data, while a short DataLength was still accepted. Limit each context to its Next value, reject offsets before the context header, and reject malformed chains. Bound the name range by the current context and do not dispatch a known handler when DataLength is zero. Read the QFid DiskFileId only when the context data covers that field. Parse the lease context from DataOffset and require DataLength to match the v1 or v2 lease_context size used by ksmbd. A size mismatch skips lease parsing without failing the open.

Linux

In the Linux kernel, the following vulnerability has been resolved: smb: client: close handle after create-context parsing failure SMB2_open() accounts a successful CREATE response as a remote open before parsing its create contexts. If smb2_parse_contexts() rejects malformed context data, SMB2_open() returns without closing the handle, leaving the server-side handle open and num_remote_opens elevated. Close the handle after a post-CREATE context parsing failure so the error path releases the remote resource and balances the open count.

Linux

In the Linux kernel, the following vulnerability has been resolved: smb: client: clean up failed cached directory opens open_cached_dir() sends CREATE and QUERY_INFO as a compound request. If the CREATE succeeds but a later command returns an error, the function must retain the CREATE FID so common cleanup can issue SMB2_close(). It also must not treat a response error as a valid CREATE. Validate the CREATE response before using its fields, record the FIDs, and mark the handle open before handling errors from later compound commands. Move the -EREMCHG reconnect handling before response validation so a missing response does not hide the reconnect request. Count the handle when it is marked open; confirmed close responses decrement the counter, while existing close retry behavior remains best effort on transport failures.

Linux

In the Linux kernel, the following vulnerability has been resolved: smb: client: use finish_no_open() for non-regular inodes An O_CREAT open can find an existing symlink or another non-regular inode. cifs_atomic_open() calls finish_open() on it and attaches a cifsFileInfo. Symlink inodes have no CIFS release operation, so the dentry reference held by cifsFileInfo is leaked. FMODE_OPENED also prevents the VFS from following the symlink. Track whether cifs_do_create() returned an open server handle. For non-regular inodes, close the handle if present, remove the pending open, and call finish_no_open() so the VFS can continue the lookup. Do not set FMODE_CREATED unless a regular file was opened. For O_NOFOLLOW with __O_REGULAR, return -ELOOP before the VFS's -EFTYPE check. Defer closing a legacy POSIX handle on a non-regular inode until after inode lookup. This avoids closing it again if lookup fails.

Linux

In the Linux kernel, the following vulnerability has been resolved: smb: client: close completed creates on compound wait errors compound_send_recv() waits for responses in order. If a later wait is interrupted, or if a later MID fails during response synchronization, an earlier CREATE may already have opened a remote handle. The earlier mid is then released without invoking handle_cancelled_mid(), leaving the remote handle open because no FID was copied to the caller. Mark completed earlier mids as cancelled when a compound wait or MID synchronization aborts. Keep their response buffers attached while the MIDs are synchronized, and transfer them only after synchronization of the processed responses, so the release path can inspect successful CREATE responses and queue SMB2_close() after a later failure. Account for a remote open only after the close work is allocated and before it is queued, since the caller has not yet updated num_remote_opens. Mark the create+close compound used by smb2_unlink() so it is not closed again. Non-CREATE responses and compounds that already include a close keep their existing behavior.

Linux

In the Linux kernel, the following vulnerability has been resolved: smb: client: delete compound mids on send failure before unlock When sending a compound request fails, smb_send_rqst() kicks off a reconnect. compound_send_recv() still has those mids on pending_mid_q, but it unlocks the server without removing them first. During reconnect, cifs_abort_connection() walks pending_mid_q and runs each mid callback. With no response yet, those callbacks return credits and drop in_flight. Then compound_send_recv()'s send-error path returns the same credits again. in_flight ends up decremented twice and smb2_add_credits() WARNs. syzbot hits this during SMB2_negotiate when the socket send fails. cifs_call_async() already calls delete_mid() before unlock on send failure. Do the same for compound chains and set cancelled_mid[] so the out: path does not delete them again.

Linux

In the Linux kernel, the following vulnerability has been resolved: xfs: release orphanage dir inode if chown fails LOLLM points out that we leak the igrab'd reference to the orphanage directory inode if chowning it fails. Fix that.

Linux

In the Linux kernel, the following vulnerability has been resolved: xfs: fix wild memcpy access when formatting ondisk rtrefcount btree roots LOLLM noticed that the inode btree root formatting methods copy too many bytes -- there's only one set of keys in node blocks, not two. This causes memory corruption of whatever's beyond the buffers.

Linux

In the Linux kernel, the following vulnerability has been resolved: xfs: don't let hidden_space go negative in xfs_metafile_resv_init LOLLM points out that if the amount of fdblocks that we can reserve for a metadata btree file goes below the space already used by that file, then the hidden_space subtraction can underflow, causing xfs_dec_fdblocks to subtract a huge amount of space. We never want the target to be less than the used sapce, so fix the logic that adjusts dblocks_avail downwards. Also fix an error in the adjacent comment.

Linux

In the Linux kernel, the following vulnerability has been resolved: xfs: don't let memory failures leak blocks and kill repairs LOLLM complains that a memory allocation failure in xrep_newbt_add_blocks results in online repair leaking blocks that were previously allocated to write a new btree, but the problem is worse than that -- a limitation of the codebase is that the callers cannot undo the transaction /and/ return the error -- either you undo all changes and commit the transaction, or you error out and the filesystem goes down. However, the new btree space reservation object isn't that big (~48 bytes). Let's just do a NOFAIL allocation and the problem goes away.

Linux

In the Linux kernel, the following vulnerability has been resolved: xfs: drop dquot flush lock when we can't find a buffer to flush LOLLM noticed that xfs_qm_flush_one fails to drop the dquot flush lock if it can't grab the buffer associated with the dquot. Since there's no buffer, nobody else is going to drop the dqflock, so we need to do it ourselves.

Linux

In the Linux kernel, the following vulnerability has been resolved: xfs: fix cursor and pointer handling when recovering iunlink buckets LOLLM pointed out a bug in xlog_recover_iunlink_bucket: 1. We don't null out prev_ip after releasing it, which can lead to UAF problems if the inodegc flush call in the loop fails. at which point I noticed even more bugs: 2. If the inodegc flush inside the loop fails, we also leak @ip. 3. We set prev_agino to agino having already advanced agino, which results in inodes with i_prev_unlinked set to itself. 4. If we exit the bottom of the loop with prev_ip set, then prev_ip aliases ip and we also set its i_prev_unlinked to itself. Bugs 3 and 4 introduce loops into the unlinked list, though these loops don't surface because we immediately flush each unlinked inode after loading it. Fix all of these issues.

Linux

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: fix helper UAF due to extensions realloc While calling the helpers, a raw pointer to the extensions area is wired into expectations list: -> nf_ct_helper() -> helper->help() -> nf_ct_expect_related_report() -> nf_ct_expect_insert() -> hlist_add_head_rcu(&exp->lnode, &master_help->expectations) In case the connection is not confirmed yet, more extensions can be added afterwards with *_ext_add() calls reallocating the extension space and leaving the now invalid pointer in the expectations list that is later accessed while removing the expectation. Make sure that helpers are called at the end after all the other extensions are already added. Note that the helper rejection now leaves the mark and labels set, but that's not different from how the NAT was handled before or how the mark and the labels were handled on confirmation failure. And there are no atomicity guarantees provided by the API anyway.

Linux

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: avoid modifying shared unconfirmed ct entry In a case where skb with an unconfirmed ct entry gets cloned, we may end up processing both again but with different sets of extensions. The series of events: 1. The first clone wants to commit and runs the helpers wiring up the extension pointer into the expectation list. 2. Then it looses the confirmation keeping the entry unconfirmed. 3. Second clone now wants to commit labels or run NAT and adds the new extension for that breaking the pointer in the expectation list causing UAF on the destruction path later. While this is possible to trigger, there should be no practical network pipeline where we need to process both clones without modifications in the same zone. So, let's just reset the entry in case for some reason we got an skb with a shared one. This doesn't affect any known use cases, but avoids any potential problems with sharing and modification of the unconfirmed ct entry. Unlike openvswitch module, act_ct allows for NAT without commit. Changing that would be a uAPI break. So, act_ct needs to reset on NAT regardless of the commit flag to avoid reallocation of the extension space. This, however, doesn't really change the picture for sensible networking cases as there should be no need to run the same packet twice (before and after the clone) through conntrack without packet header or zone changes and without commit. The fixes tag points to the introduction of helpers, since that's the main UAF trigger for the sharing.

Linux

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Delay freeing of shadow S2 structures until VM destruction We free the shadow S2 structures from kvm_arch_flush_shadow_all(), which is a Bad Idea(tm). Freeing the page tables is fair game (this is what this callback is for), but freeing the container that could still be referenced by another part of the system is not great. Instead, grow separate destructors that gets called when we tear the VM down for good. From there, we can nuke both the individual MMUs as well as the global array that points to them, safe in the knowledge that the vcpus themselves have been destroyed already.

Linux

In the Linux kernel, the following vulnerability has been resolved: smb/server: cancel async requests when closing connection An async request may still be waiting when a connection is closed. This can stop the connection from closing. Cancel active async requests before waiting for them to finish.

Linux

In the Linux kernel, the following vulnerability has been resolved: mptcp: options: fix uninit-value in mptcp_write_data_fin When sending a DATA_FIN without data, and because the DATA_FIN occupies 1 octet of the connection-level sequence space [1], it is then required to add a DSS mapping with specific values. If the checksum has been negotiated, it also needs to be computed, and included in the outgoing packet, and thus the initial csum data needs to be reset to 0 as well. This is no longer the case since commit cfcceb7a39fc ("tcp: shrink per-packet memset in __tcp_transmit_skb()"), because the whole ext_copy structure is no longer zeroed by default. This seems to be the only case where use_map is changed and set afterwards, so initialising the csum field only in this case, along with other fields for this specific case.

Linux

In the Linux kernel, the following vulnerability has been resolved: media: qcom: iris: fix runtime PM reference leaks Use pm_runtime_resume_and_get() in iris_enable_power_domains() to avoid leaking a runtime PM usage count on failure. Also ensure pm_runtime_put_sync() is always called in iris_disable_power_domains(), even when iris_opp_set_rate() fails, so runtime PM references remain balanced.

Linux

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Disable device buffer exporting Device buffers are never intended to be exported. Disable exporting support explicitly.

Linux

In the Linux kernel, the following vulnerability has been resolved: EDAC/altera: Use parent device for devres in altr_portb_setup() Anchor the devres group and the devm-managed IRQ requests in altr_portb_setup() to the actual parent device (device->edac->dev) instead of the embedded struct device inside the copied per-port altr_edac_device_dev. This keeps devres_open_group(), devm_request_irq(), devres_remove_group() and devres_release_group() all referring to the same long-lived device so the group and the resources allocated inside it are torn down together.

Linux

In the Linux kernel, the following vulnerability has been resolved: sysctl: Check range in proc_dointvec_ms_jiffies_minmax Add the range check to do_proc_int_conv_ms_jiffies_minmax that commit d174174c6776 ("sysctl: replace SYSCTL_INT_CONV_CUSTOM macro with functions") incorrectly removed.