Octobre 2026

astral-sh uv

Astral uv before 0.8.22 contains a path traversal vulnerability in source distribution (sdist) tar extraction that allows a specially crafted sequence of symlinks to redirect file writes outside the intended extraction prefix. Attackers can publish a malicious sdist that, when installed by a victim, writes arbitrary files to filesystem locations outside the installation prefix.

Oracle Corporation PeopleSoft Enterprise PeopleTools

Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Report Distribution). Supported versions that are affected are 8.61-8.63. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N).

Oracle Corporation PeopleSoft Enterprise PeopleTools

Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Report Distribution). Supported versions that are affected are 8.61-8.63. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 5.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:N/A:N).

Oracle Corporation PeopleSoft Enterprise PeopleTools

Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Report Distribution). Supported versions that are affected are 8.61-8.63. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. While the vulnerability is in PeopleSoft Enterprise PeopleTools, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 6.8 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:C/C:H/I:N/A:N).

Oracle Corporation PeopleSoft Enterprise PeopleTools

Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Report Distribution). Supported versions that are affected are 8.61-8.63. Difficult to exploit vulnerability allows high privileged attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. While the vulnerability is in PeopleSoft Enterprise PeopleTools, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 5.8 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:H/I:N/A:N).

Oracle Corporation PeopleSoft Enterprise PeopleTools

Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Report Distribution). Supported versions that are affected are 8.61-8.63. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized read access to a subset of PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 4.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N).

Oracle Corporation PeopleSoft Enterprise PeopleTools

Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Report Distribution). Supported versions that are affected are 8.61-8.63. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N).

pypa virtualenv

virtualenv is a tool for creating isolated virtual python environments. Prior to 21.14.9, PipInstall._uninstall_previous_version() accepts existing seed-package metadata and _uninstall_dist() joins entries from top_level.txt and RECORD to site-packages without checking containment. When a reused destination contains distribution metadata influenced by another account, relative traversal, absolute entries, or linked parents can cause app-data reseeding to delete files outside the environment or the environment root with the invoking user's permissions, provided that user has deletion rights over the named paths. The deletion occurs during environment creation before any later use of the environment. Fresh environments without existing package metadata and creation with --clear do not enter this cleanup path. This issue is fixed in version 21.14.9.

distribution

Distribution is a toolkit to pack, ship, store, and deliver container content. Prior to 3.1.2, registry/client.(*manifests).Get() reads a manifest returned for a digest-pinned request and passes it to distribution.UnmarshalManifest without hashing the body against the requested digest, allowing a malicious or intercepted registry response to substitute attacker-chosen manifest content even when Docker-Content-Digest claims the requested value. The bundled pull-through proxy in registry/proxy/proxymanifeststore.go can cache and re-serve the substituted manifest. This issue is fixed in version 3.1.2.

Microsoft Windows 10 Version 1607 · Microsoft Windows 10 Version 1809 · Microsoft Windows 11 Version 24H2 · Microsoft Windows 11 Version 25H2

Incorrect authorization in Windows Key Distribution Center allows an authorized attacker to bypass a security feature over a network.

quasarframework quasar · @quasar app-vite

Quasar Framework is a framework for building high-performance Vue.js user interfaces. From 3.1.0 until 3.3.0, @quasar/app-vite SSG page definitions returned by getSsgPages() could supply dir and filename values that were joined to build.distDir without verifying the final destination. Parent traversal or an existing symlink below the distribution directory could create new HTML files or directories outside the output tree with the build user's permissions. Application configuration and SSG page definitions are trusted by default, so exploitation requires a build process that derives them from external or otherwise less-trusted content; existing files remain protected by the renderer's no-overwrite behavior. This issue is fixed in version 3.3.0.

zephyrproject zephyr

The Bluetooth host's ATT transmit path releases a buffer it does not own when signing fails. chan_send() in subsys/bluetooth/host/att.c documents (and every other error exit implements) the contract that on failure the caller retains ownership of the net_buf; the BT_ATT_OP_SIGNED_WRITE_CMD branch instead called net_buf_unref(buf) when bt_smp_sign() returned an error and then returned that error to the caller. The callers act on the contract: process_queue() re-queues the buffer with k_queue_prepend(), bt_att_chan_send_rsp() puts it back on chan->tx_queue, bt_att_chan_req_send() restores it into the request, and att_req_retry() unreferences it — so the already-freed buffer was re-queued, later dereferenced, and eventually freed again. An ATT Signed Write Command is produced when an application calls bt_gatt_write_without_response_cb() with sign set on an unencrypted connection. bt_smp_sign() fails whenever no local CSRK exists for the peer (-ENOENT), and whether one exists is negotiated with the peer: smp_distribute_keys() stores a local CSRK only when the peer's pairing key-distribution field requests the signing key and bonding was agreed. A peer can therefore pair without accepting the CSRK, pair with No Bonding, remain unpaired, or keep the link unencrypted, and the victim's next signed write takes the failing path. Because struct net_buf's node field is simultaneously the linkage word for the ATT TX FIFO, for the deferred-destroy list used by the att_pool destroy callback att_tx_destroy(), and for the pool free list, the mishandled buffer corrupts these lists and can be re-issued by bt_att_create_pdu() to a new PDU while the ATT TX path still holds it. The same branch also saved the net_buf_simple_state only after signing, so a buffer restored after a bt_l2cap_send_pdu() failure kept its 12-octet signature; a subsequent retry re-signed it and appended a second signature with net_buf_add(buf, 12) to a buffer that bt_att_create_pdu() sized for exactly one, writing past the end of the pooled buffer in builds where the net_buf tailroom assertion is compiled out. Impact is host-side memory corruption in the Bluetooth stack: list corruption, a pooled ATT buffer with two owners (wrong PDU contents transmitted, or a double free when the queues are drained at disconnect), and a bounded out-of-bounds write on the retry path — typically observed as a crash or assertion failure. Exposure requires the deprecated CONFIG_BT_SIGNING to be enabled and an application that actually issues signed writes; in that configuration the triggering condition is under the remote peer's control.

illumos-gate · OmniOS

A stack-based buffer overflow in the illumos reparse point daemon (reparsed) allows a local user to crash the daemon. get_fs_locations() in usr/src/cmd/fs.d/nfs/rp_basic/libnfs_basic.c, part of the nfs-basic reparse plugin, copies the host and path components of a reparse string into a fixed 1024-byte stack buffer without checking their length. The reparsed door at /var/run/reparsed_door is readable by all users and the door server does not check the caller's credentials, so an unprivileged local user can send an nfs-basic request with an overlong host or path component to overflow the buffer. On systems built with stack protection, which is the default, this causes reparsed to abort; repeated requests place the svc:/system/filesystem/reparse service into maintenance. The service is disabled by default. The flaw has existed since 2009 (illumos-gate commit 2f172c55), and affects any illumos distribution prior to illumos-gate commit 6a2df4aa.

illumos-gate · OmniOS

A NULL pointer dereference in the illumos Network Auto-Magic daemon (nwamd) allows a local user to crash the daemon. nwamd_door_switch() in usr/src/cmd/cmd-inet/lib/nwamd/door_if.c writes to the caller's request structure before checking that a request was supplied, and before checking the caller's credentials. Because the nwamd door at /etc/svc/volatile/nwam/nwam_door is accessible to all local users, an unprivileged user can issue a door_call() with no argument data to crash nwamd; repeated calls place the svc:/network/physical:nwam service into maintenance, stopping automatic network configuration. nwamd runs only when svc:/network/physical:nwam is enabled, which is not the default. The flaw has existed since 2010 (illumos-gate commit 6ba597c5), and affects any illumos distribution prior to illumos-gate commit 0f1064d9.

illumos-gate · OmniOS

A missing release of resources in the illumos name service cache daemon (nscd) allows a local user to exhaust kernel memory. The nscd door server procedure, switcher() in usr/src/cmd/nscd/nscd_frontend.c, does not close file descriptors that are passed with a door call but not used by the request, and the main nscd door at /var/run/name_service_door accepts passed descriptors from any user in its zone. Because nscd also runs with an unlimited file descriptor limit, an unprivileged local user, including one in a non-global zone, can repeatedly pass a descriptor to its zone's nscd in a door_call() loop, causing the file descriptor table of nscd to grow without bound in kernel memory. This causes a denial of service of nscd and can render processes in all zones on the host unresponsive. The flaw has existed since 2006 (illumos-gate commit cb5caa98), and affects any illumos distribution prior to illumos-gate commit af810a72.

illumos-gate · OmniOS

A reachable assertion in the illumos bhyve instruction emulator allows a guest to panic the host. When emulating a REP-prefixed MOVS or STOS instruction that accesses guest MMIO, vie_emulate_movs() and vie_emulate_stos() in usr/src/uts/intel/io/vmm/vmm_instruction_emul.c do not clear the VIES_REPEAT status flag on the final iteration. For MMIO regions emulated in the kernel (the local APIC, I/O APIC and HPET), the stale flag causes a VERIFY assertion in vie_advance_pc() to fail, and the host panics. A privileged user within a guest VM can issue a REP MOVS or REP STOS instruction against the local APIC page to cause a denial of service of the host and every other guest running on it. The flaw has existed since 2020 (illumos-gate commit e0c0d44e), and affects any illumos distribution prior to illumos-gate commit 696ecf8d.

MISP

MISP contains a defect in its event save workflow that prevents the correlation engine from recalculating correlations when an event's distribution level or sharing group is modified. When a user edits an existing event and changes its distribution or sharing_group_id, the internal before-save hook stored the incoming (new) data rather than the previously persisted values. As a result, the after-save comparison that determines whether a correlation refresh is needed never detected the change, and stale correlations persisted. Security impact: - Stale correlations may continue to expose event data to users in a broader sharing group after the event has been moved to a more restrictive group, resulting in unintended information disclosure. - Conversely, newly relevant correlations may not appear after a distribution widening, degrading the completeness of threat intelligence sharing. Preconditions: - An authenticated user with write access to at least one MISP event. - The user modifies the event's distribution or sharing_group_id field. Affected versions: <2.5.48

Red Hat Satellite 6 · Red Hat Update Infrastructure 4 for Cloud Providers · Red Hat Update Infrastructure 5

A flaw was found in pulp-rpm when it publishes a distribution tree. Addon and variant ids from .treeinfo are used as directory names. A user who can sync or upload that tree can make the publish task create a new directory outside the task work area and write that tree's repository metadata and packages there, as the Pulp worker user. An existing file or directory is not replaced. The flaw does not disclose data and does not stop the service.

MISP

MISP contains an authorization bypass in the related events listing functionality. When a user requests the list of events correlated to a given event, the system retrieved related event metadata directly from the correlation table without re-validating the caller's access rights against each related event. The correlation table stores a snapshot of the event's distribution level and sharing group at the time the correlation was created, and does not carry the published flag. As a result, events that the caller is not permitted to open—because they are unpublished, or because their distribution or sharing group has changed since the correlation was recorded—were still returned with their metadata (title, date, correlating value counts). Preconditions: - An authenticated user with access to at least one event in MISP. - The existence of correlation entries linking that event to other events the user should not be able to view. Impact: - Unauthorized disclosure of event metadata (titles, dates, correlation counts) for events the user has no right to access. - Potential reconnaissance of threat-intelligence event names and timelines across sharing groups. Affected: MISP versions prior to the fix commit (2ffa97f05).

Red Hat Build of Keycloak · Red Hat Single Sign-On 7

A flaw was found in the X.509 client certificate authenticator of Keycloak. When CRL Distribution Point checking is enabled, the server fails to properly validate the file paths provided in a client certificate. An attacker can provide a specially crafted certificate that causes the server to attempt to read sensitive files from the local system or exhaust memory by loading extremely large files, potentially leading to information disclosure or a system crash.

MISP

MISP contains an incomplete authorization check in the discussion posting functionality. When a user submits a post to a thread or replies to an existing post, the application only verified whether the target thread was restricted to a single organization (org-only distribution). It did not enforce the full thread access control list, including sharing-group membership and event-level visibility. As a result, an authenticated user who is outside the relevant sharing group or who does not have visibility on the associated event could: - Read the thread title and the content of the quoted post - Submit a new post into the discussion thread This constitutes both an information disclosure (reading restricted thread and post content) and an integrity issue (injecting content into a thread the user is not authorized to participate in). Affected: <2.5.48