Veille CVE

Mardi 6 octobre 2026

13 CVE

Critique 0 Élevée 6 Moyenne 5 Faible 1 Non évaluée 1 Exploitées (KEV) Tri : plus récentes « Coder coder » ✕
  1. CVE-2026-19029 6.8 Moyenne

    The HDF Group HDF5

    A heap-based buffer over-read in H5Z__filter_scaleoffset() in src/H5Zscaleoffset.c in HDF5 through 2.2.0 lets an attacker cause a denial of service (application crash) with a crafted HDF5 file. When the stored minimum bits equal the full precision of the datatype, the decoder copies d_nelmts * size bytes from the compressed chunk without checking that the chunk holds that many bytes. Both values come from attacker-controlled scale-offset filter parameters in the dataset's filter pipeline message.

  2. CVE-2026-106582 3.7 Faible

    OpenBSD OpenSSH

    In sshd and ssh in OpenSSH before 10.6, an LZ77 dictionary coder can be used even though this is contraindicated by the arXiv 2609.07709 "Crossing the Streams" findings.

  3. CVE-2026-106447 8.7 Élevée

    stablelib

    StableLib is a stable library of useful TypeScript and JavaScript code. Prior to 2.0.4, the @stablelib/cbor decoder recursively processes nested CBOR arrays, maps, and tags through _decodeValue() without enforcing a maximum nesting depth. A sufficiently deep structure exhausts the JavaScript call stack, causing a decoding exception and potentially terminating an uncaught request worker or process. This issue is fixed in version 2.0.4.

  4. CVE-2026-106118 7.5 Élevée

    SixLabors ImageSharp

    ImageSharp is a 2D graphics library. From 3.0.0 until 4.1.1, tiled TIFF decoding allocates a destination buffer using TileWidth but TiffDecompressorsFactory.Create constructs T4, T6, and Modified Huffman decompressors using the full frame width. TiffDecoderCore.DecodeTilesChunky can therefore direct frame-width fax scanlines into a tile-width buffer when TileWidth is smaller than ImageWidth. The mismatch causes attacker-controlled out-of-bounds writes, heap corruption, and process termination even with legal per-row run codes. This tiled-path vulnerability is distinct from oversized CCITT runs in strip decoding. This issue is fixed in version 4.1.1.

  5. CVE-2026-106116 5.3 Moyenne

    SixLabors ImageSharp

    ImageSharp is a 2D graphics library. From 2.0.0 until 4.1.2, ExifReader.ReadValues64 trusts the 64-bit BigTIFF IFD entry count and iterates once per declared entry. When fewer than 20 bytes remain, ExifReader.ReadValue64 returns without advancing the stream or terminating the outer loop, so a small malformed BigTIFF can keep one decoder thread executing for an attacker-controlled duration. This report does not claim worker-pool exhaustion. This issue is fixed in version 4.1.2.

  6. CVE-2026-106115 7.5 Élevée

    SixLabors ImageSharp

    ImageSharp is a 2D graphics library. From 2.1.0 until 4.1.2, the TIFF CCITT Group 4 encoder allocates Width times rowsPerStrip bytes even though T6BitCompressor.CompressStrip can emit encoded row data and two 12-bit end-of-facsimile-block codes beyond that capacity. TiffCcittCompressor.WriteCode performs unchecked writes, and a decode-and-re-encode flow can inherit TiffCompression.CcittGroup4Fax and one-bit metadata from attacker-supplied input. The resulting out-of-bounds writes can corrupt memory and terminate the process. This issue is fixed in version 4.1.2.

  7. CVE-2026-106114 5.3 Moyenne

    SixLabors ImageSharp

    ImageSharp is a 2D graphics library. From 1.0.0-beta0001 until 4.1.2, ICC CLUT parsing calculates allocation sizes from attacker-declared channel and grid dimensions before confirming that the profile contains the declared values. IccDataReader.ReadClutF32 can request a large float array, and earlier public IccProfile.Entries parsing paths can allocate a large jagged representation, from a short truncated profile. In version 4, automatic image conversion reaches the parser when DecoderOptions.ColorProfileHandling is Convert; the default Preserve mode avoids that conversion path. The demonstrated impact is memory pressure and input-validation failure, not unhandled process termination. This issue is fixed in version 4.1.2.

  8. CVE-2026-106112 7.5 Élevée

    SixLabors ImageSharp

    ImageSharp is a 2D graphics library. From 4.0.0 until 4.1.2, ICC LUT16 conversion accepts more than four output channels even though ClutCalculator.Calculate and LutEntryCalculator.CalculateLut store intermediate and output values in Vector4. When DecoderOptions.ColorProfileHandling is set to Convert, a malformed embedded profile can direct interpolation and output-LUT operations to write one float per declared channel beyond the four-float destination. This can corrupt memory and terminate the process; the default Preserve mode does not run ICC conversion. This issue is fixed in version 4.1.2.

  9. CVE-2026-106111 5.9 Moyenne

    SixLabors ImageSharp

    ImageSharp is a 2D graphics library. From 4.0.0 until 4.1.2, ExrBaseDecompressor.UndoZipCompression accepts a nonempty ZIP or ZIPS inflate result that is shorter than the EXR block's required size. ZipExrCompression.Decompress reconstructs the returned prefix while ExrDecoderCore processes the full expected block from a buffer obtained through Configuration.Default, allowing bytes retained from a completed prior ImageSharp operation to appear in decoded pixels. Applications that expose pixels or output from the later attacker-controlled EXR decode can disclose process-local image data. This issue is fixed in version 4.1.2.

  10. CVE-2026-106110 7.5 Élevée

    SixLabors ImageSharp

    ImageSharp is a 2D graphics library. From 2.0.0 until 4.1.2, the TIFF CCITT Group 3 encoder allocates an undersized compressed-data buffer for narrow 1-bit images. TiffCcittCompressor.Initialize does not reserve enough space for the row data and T4 end-of-line codes, and T4BitCompressor.CompressStrip reaches unchecked writes when TiffCompression.CcittGroup3Fax is selected directly or inherited from decoded TIFF metadata. An attacker-controlled encode or decode-and-re-encode flow can write beyond the logical output span, corrupt process memory, and terminate the process. This issue is fixed in version 4.1.2.

  11. CVE-2026-98273 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: x86/kprobes: Fix crash when probing CS CALL instructions When using eBPF to probe CS CALL instructions within a function, a crash can be triggered. The eBPF tool probes offset 257 of the __hrtimer_run_queues() function: <__hrtimer_run_queues+249>: nopl 0x0(%rax,%rax,1) <__hrtimer_run_queues+254>: mov %r14,%rdi <__hrtimer_run_queues+257>: cs call <__x86_indirect_thunk_r12> <__hrtimer_run_queues+263>: mov %eax,%r12d <__hrtimer_run_queues+266>: xchg %ax,%ax <__hrtimer_run_queues+268>: mov %r13,%rdi Which triggers this crash: BUG: unable to handle page fault for address: 00000000000f41c9 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P RIP: 0010:__hrtimer_run_queues+0x106/0x230 Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is at the 6th byte of the above CS CALL instruction. Since the CS CALL instruction occupies 6 bytes, the exception occurred in the middle of that call instruction. The root cause is that when using eBPF tools to probe in the middle of a function, a kprobe with INT3 is used as the underlying implementation. During single-step emulation of the original CALL instruction, int3_emulate_call() assumes that the probed CALL instruction is 5 bytes long. However, the actual CS-prefixed CALL instruction occupies 6 bytes, so it constructs an incorrect exception return address. When the CPU returns from the kprobe handler, the next instruction to be executed is at the address of the last byte of that CS CALL instruction. Coincidentally, starting from that address, the CPU fetches and decodes a completely different instruction, which ultimately triggers a kernel crash. Fix the issue by using the actual instruction length obtained from the instruction decoder when constructing the exception return address, rather than relying on the hardcoded CALL_INSN_SIZE macro. [ mingo: Refined the changelog ]

  12. CVE-2026-105764 7.7 Élevée

    immich-app immich

    Immich is a high-performance self-hosted photo and video management solution. Prior to 3.2.4, an authenticated non-admin user could upload SVG files that thumbnail-generation code in server/src/repositories/media.repository.ts passed to libvips. Files that bypassed libvips' native SVG loader fell through to ImageMagick, where attacker-controlled &lt;image href&gt; values reached unrestricted MSL and VIDEO coder operations. By storing one crafted asset and referencing its path from a second delayed-marker SVG, an attacker could execute code in the immich-server container when thumbnail processing ran. This issue is fixed in version 3.2.4.

  13. CVE-2026-105754 6.5 Moyenne

    vllm-project vllm · Vllm vllm

    vLLM is an inference and serving engine for large language models. Prior to 0.30.0, the /inference/v1/generate endpoint in the disaggregated scale-out path accepts caller-supplied tensors in the features.kwargs_data field, cache identifiers in the features.mm_hashes field, ranges in the features.mm_placeholders field, and wire-selected multimodal field processors without rebinding them to the active model renderer contract. Forged grid geometry, field types, or non-positive placeholder lengths can terminate the shared EngineCore; when an attacker knows or can induce a victim's content hash, forged cache hashes can poison or retrieve cross-request encoder-cache state; and dropped sparse placeholder masks can alter replayed transport semantics. This issue is fixed in version 0.30.0.