Toutes les dates

Nous Research Hermes Agent

The webhook platform gateway in Nous Research Hermes Agent versions builds the session chat_id as webhook:{route_name}:{delivery_id} and re-derives the authorizing route by splitting that string, so a route name containing a ":" resolves toolset authorization to a different, higher-privileged prefix route than the one authenticated, which allows a remote attacker with the target HMAC to gain that higher-privileged route's toolsets.

Rejected reason: This CVE has been rejected because it was issued to a development-only issue with no affected distributed version identified.

A heap use-after-free in the gf_odf_ac4_cfg_clean_list function (/odf/descriptors.c) of GPAC Project/MP4Box before 2.5 allows attackers to cause a Denial of Service (DoS) via supplying a crafted AC4 file.

A NULL pointer dereference in the gf_ac4_presentation_ch_mode function (/media_tools/av_parsers.c) of GPAC Project/MP4Box before 2.5 allows attackers to cause a Denial of Service (DoS) via supplying a crafted AC4 file.

Linux

In the Linux kernel, the following vulnerability has been resolved: bpf: Infer zext_dst based on static register liveness analysis As reported in the thread [1], the verifier's 32-bit operations zero extension logic is broken. This logic is responsible for correct semantics of 32-bit operations on s390 architecture. According to BPF semantics, operation `w1 += 1` is supposed to zero extend the upper half of the register `r1`. On s390 the JIT relies on the verifier emitting explicit zero extension before such operations. The verifier attempts to minimize the amount of zero extensions inserted by tracking whether upper halves of the 64-bit registers are ever used. Previously such tracking worked as follows: - bpf_reg_state->subreg_def field was set by do_check_insn() for each operation defining lower but not the upper halves of the register. - Whenever an operation reading the whole register was verified, the verifier checked register's subreg_def and set bpf_insn_aux_data->zext_dst flag as true via a call to mark_insn_zext() function. - After the verification was complete, a special pass bpf_opt_subreg_zext_lo32_rnd_hi32() extended 32-bit operations with bpf_insn_aux_data->zext_dst set as true by adding explicit zero extension. Note that the logic above relies on bpf_reg_state->subreg_def, which is a property of a current verifier state. Before the commit [2] two additional steps happened: - The verifier tracked upper and lower register halves' liveness as flags REG_LIVE_READ{32,64} in bpf_reg_state->live. - The function propagate_liveness() called mark_insn_zext() in order to transfer the knowledge about which registers have their upper halves alive (and thus might require zero extension). The commit [2] removed the two steps described above, hence making possible a situation like below: - The register's upper half is set and is used on some verification path P1 and the register happens not to be marked as precise. - The checkpoint C is created while processing some instruction between register initialization and usage. - On some other verification path P2 the register's upper half is not initialized and that path ends hitting the checkpoint C. - In such a case the register's initialization on path P2 would lack zext_dst mark, making it possible for the program to inject an arbitrary value in the register's upper half. This commit replaces subreg_def based logic with computing zext_dst statically, as a part of the bpf_compute_live_registers() analysis: - The analysis now tracks usage of upper and lower halves of the registers separately. - If some instruction defines a 32-bit subregister, but not the whole register, *and* the upper half of the register is alive after that instruction, the instruction is marked as zext_dst. There is one notable drop in precision: whenever a BPF subprogram is called, all 64 bits of parameter registers are presumed to be used. The assumption is that such a drop in precision would not inflict a noticeable performance penalty. [1] https://lore.kernel.org/bpf/CAGKGUv=sOuqQtA1Ub-5JXfA4FPosJFYKAQE4B79cK+P1erxqtg@mail.gmail.com/ [2] commit 107e16979905 ("bpf: disable and remove registers chain based liveness")

A segmentation violation in the check_media_profile function (/mp4box/mp4box.c) of GPAC Project/MP4Box before 2.5 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file.

A heap use-after-free in the dasher_flush_segment function (/filters/dasher.c) of GPAC Project/MP4Box before 2.5 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file.

A heap use-after-free in the gf_filter_pid_send_event_downstream function (/filter_core/filter_pid.c) of GPAC Project/MP4Box before 2.5 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file.

A segmentation violation in the gf_isom_get_esd function (/isomedia/isom_read.c) of GPAC Project/MP4Box before 2.5 allows attackers to cause a Denial of Service (DoS) via supplying a crafted XML file.

A use-after-free in the gf_filter_packet_destroy function (/filter_core/filter_pck.c) of GPAC Project/MP4Box before 2.5 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MPEG-2 file.

Linux

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID Copy the content of a Periodic Advertisement Report to BASE only if the service UUID is Basic Audio Announcement Service UUID.

An out-of-bounds read in gf_odf_ac4_cfg_dsi_v1 (/odf/descriptors.c) in GPAC Project/MP4Box before v26.07.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted AC4 file.

A NULL pointer dereference in the dasher_insert_timeline_entry function (/filters/dasher.c) of GPAC Project/MP4Box before 2.5 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file.

A NULL pointer dereference in the StatSFVec2f function (/scene_manager/scene_stats.c) of GPAC Project/MP4Box before 2.5 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MPEG-4 file.

WSO2 Identity Server · WSO2 Carbon OAuth

The system fails to invalidate existing access tokens associated with sub-organization users during sensitive account management operations such as password reset, role change, or sub-organization disablement. This oversight allows previously issued tokens to remain active even after the user's access context has been modified or revoked through administrative actions. The identified issue could lead to unauthorized access by a malicious actor, but only when all of the following conditions are met: previously issued access tokens remain active, and these tokens have been exposed to malicious actors.

Apache Software Foundation Apache bRPC

The MySQL client response parser in Apache bRPC dereferences a null pointer when the server peer sends a zero-payload-length response packet. A response packet whose declared payload length is zero is accepted by the frame-length check (is_full_package), after which the parser reads the response type byte via an unbounded 5-byte fetch that returns nullptr, and type = p[4] dereferences it, crashing the client process. Root Cause: In brpc::policy::MysqlReply::ConsumePartialIOBuf, buf.fetch(header, 5) returns nullptr when the buffered data only holds the 4-byte header of a zero-length packet, then the code reads p[4] (and, in the fast-auth path, p2[4]) without checking for a null or zero-length packet. Affected Scenarios: A brpc MySQL client connecting to a malicious or compromised MySQL server (or a MITM) can be crashed by a zero-length server response packet, resulting in denial of service of the client. Fix: The fix rejects zero-length response packets (returning PARSE_ERROR_ABSOLUTELY_WRONG) both for the initial response type determination and after a fast-auth marker, before reading the type byte. Upgrade to the Apache bRPC version 1.18.0 or apply the PR patch at https://github.com/apache/brpc/pull/3536.

Apache Software Foundation Apache bRPC

The Discovery naming-service reply parser in Apache bRPC (versions < 1.18.0) calls RapidJSON object-only accessors (FindMember) on JSON values without first validating that those values are objects. A malformed Discovery response whose data/service members or instances list contain non-object entries (e.g. a bare integer) triggers the RapidJSON object-access precondition on the client, reading memory out of bounds and potentially crashing the bRPC client. Root Cause: In src/brpc/policy/discovery_naming_service.cpp, DiscoveryNamingService::GetServers() and DiscoveryNames::ListDiscoveryNodes() access JSON values with member functions on non-object values. RapidJSON only defines these operations for object types; invoking them on a non-object violates the class invariant and results in undefined behavior (out-of-bounds read), commonly crashing the process. Affected Scenarios: An operator-configured (or compromised) Discovery backend returns a malformed /discovery/nodes or /discovery/fetchs response whose data/service/instance entries are not JSON objects, crashing any bRPC client that refreshes its server list. How to Fix: 1. Upgrade bRPC to version 1.18.0 or later, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3533 The fix validates that the Discovery response data, per-service data, and instance entries are JSON objects (and skips non-object node/instance entries and rejects non-object data/service values) before calling member accessors.

Apache Software Foundation Apache bRPC

On a brpc::Server that sets both ServerOptions.auth and ServerOptions.internal_port, the HTTP built-in service exemption on internal_port can be abused to bypass authentication entirely. VerifyHttpRequest() returns true without checking any credential when a built-in service is requested on internal_port, and this verdict is not per - request: verification runs only for the first message of a connection and the result latches the connection. Sending a request such as GET /status to internal_port first authenticates the whole connection, after which every subsequent request dispatched on the same connection is handled without ever calling VerifyHttpRequest(). This lets a remote attacker reach ordinary (non-built-in, non-tabbed) authenticated services without supplying valid credentials whenever the server uses ServerOptions.internal_port together with an Authenticator. The fix restricts internal_port so that it carries only built-in and Tabbed services; requests for ordinary services sent to internal_port are rejected with EPREM / HTTP 403.  Mitigation / Fix: upgrade to 1.18.0 or apply PR https://github.com/apache/brpc/pull/3525 .  Users who rely on serving normal services on internal_port must move those requests to the port passed to Server::Start().

Apache Software Foundation Apache bRPC

External control of file name or path and uncontrolled resource consumption in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers who can reach the builtin service port to create directories and truncate/overwrite files with the privileges of the server process, or to hold the process-wide CPU/contention profiler for an arbitrarily long time. Root Cause: 1. The builtin /flags service allows gflags carrying a validator to be modified at runtime via ?setvalue=. The bvar/mbvar dump path gflags (bvar_dump_file, bvar_dump_tabs, mbvar_dump_file) were registered with an accept-anything validator whose only purpose was to wake the dumping thread. A remote attacker could therefore repoint the dump path (e.g. GET /flags/bvar_dump_file?setvalue=/victim/dir/target followed by GET /flags/bvar_dump?setvalue=true, or the equivalent for mbvar_dump_file, which is used verbatim without a forced suffix), making the dumping thread recursively create directories and open/truncate files at attacker-chosen locations. Tab names in bvar_dump_tabs were appended to the path without sanitization, allowing '..' to escape the configured directory. 2. The /pprof builtin service did not clamp the ?seconds= parameter to FLAGS_max_profiling_seconds (a limit that /hotspots enforced). A single request such as ?seconds=2147483647 made the handler sleep for decades while holding the process-wide gperftools CPU profiler or bthread contention profiler, so /hotspots/cpu and /hotspots/contention returned 503 for everyone else during that time. Affected Scenarios: Any Apache bRPC server exposing the builtin services (enabled by default on the same port as normal RPC traffic) to untrusted networks. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3523 Note: After the fix, bvar_dump_file, bvar_dump_tabs and mbvar_dump_file can no longer be modified at runtime through the /flags builtin service. They can still be changed programmatically via google::SetCommandLineOption(), taking effect on the next dump cycle. The profiling duration of /pprof is now capped by the -max_profiling_seconds gflag (default 300 seconds), which can be adjusted by the server owner.

Apache Software Foundation Apache bRPC

Inconsistent interpretation of HTTP requests (HTTP request/response smuggling) in the bundled HTTP/1.1 parser of Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to smuggle requests and inject headers when bRPC is deployed behind a proxy or load balancer that parses the same bytes differently. Root Cause: The bRPC fork of http-parser accepts and acts on several HTTP/1.1 header forms that a conforming front-end either rejects or interprets differently, so the framing or the header set of a message can differ between the front-end and bRPC: 1. A space before the colon of framing headers (e.g. Content-Length : 5) is accepted; the value still drives bRPC's framing while the reported field name contains the trailing space. 2. Interior spaces inside a Content-Length value (e.g. Content-Length: 1 3) are skipped, so bRPC reads 13 where a front-end reads 1 or rejects the message (same class as CVE-2022-32213 in Node.js). 3. Obsolete line folding (obs-fold, RFC 7230 3.2.4) of Content-Length and Transfer-Encoding values is accepted, so a folded framing value drives bRPC's framing while a front-end that does not unfold sees a different message. 4. Chunked trailer fields are fed to the same header callbacks as the header section and are merged into the header map like real headers. A front-end only inspects the header section, so any chunked request can smuggle fields such as Authorization or X-Forwarded-For past it. 5. Transfer-Encoding lists with optional whitespace after a comma (e.g. Transfer-Encoding: gzip, chunked) are not recognized as chunked: such requests are rejected, and responses are read until connection close instead of as chunked, causing response desync. Affected Scenarios: bRPC server or client communicating over HTTP/1.1 with a front proxy, load balancer, or any peer that parses the message independently. An attacker able to send requests through the front-end can desynchronize the two parsers to smuggle requests, forge headers (e.g. Authorization, X-Forwarded-For) via chunked trailers, or desynchronize responses. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3521 Note: After applying the fix, the four header forms above are rejected by default and chunked trailers are dropped instead of merged into the header map. Two gflags are provided for compatibility: http_allow_obs_fold=true restores acceptance of folded Content-Length/Transfer-Encoding values, and http_strict_header_token=true additionally rejects spaces inside any header field name (not only the ones that decide framing). Legitimate clients that do not use these obsolete forms are unaffected.

Apache Software Foundation Apache bRPC

Improper authorization in Apache bRPC (versions < 1.18.0) on all platforms allows remote attackers to access builtin services through the public port. Root Cause: ServerOptions.internal_port is documented to make builtin services (and Tabbed services) reachable only from the internal port, and the HTTP/h2 dispatch path enforced this. However, all protobuf-based protocol dispatch paths (baidu_std, hulu_pbrpc, sofa_pbrpc, and the nshead-based protocols public_pbrpc, nshead_mcpack, nova_pbrpc and ubrpc2pb) computed the security_mode flag but never enforced it between method resolution and method invocation. Since builtin services share the method map with user services, a client able to reach the public port could invoke builtin services such as brpc.vars or hotspots by name over these pb protocols and disclose sensitive runtime information (metrics, flags, profiler data) that the operator intended to expose only via the internal port. Affected Scenarios: Use a bRPC server with ServerOptions.internal_port configured (or with builtin/Tabbed services otherwise expected to be gated by it) while the public port is reachable from an untrusted network and any pb-based protocol is enabled. How to Fix: (Choose one of the following options)  1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3511

Apache Software Foundation Apache bRPC

Interpretation conflict in the HTTP protocol implementation in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to bypass access control rules enforced by a front proxy. Root Cause: The method dispatch function FindMethodPropertyByURI() in bRPC's HTTP protocol splits the request path with a string splitter that skips empty fields, so paths containing empty path segments (consecutive slashes), such as //flags, /flags// and /flags//port, are dispatched to the same method as their collapsed form /flags. Per RFC 3986 these are distinct paths. A front proxy that enforces an ACL (e.g. blocking access to builtin services such as /flags) matches the collapsed form only, and therefore forwards the padded literal to the bRPC server, where it is dispatched as if it were the collapsed form. This differential allows //flags?setvalue= to reach a builtin service that /flags is not allowed to reach. Additionally, the HTTP/2 implementation never validated the :path pseudo-header, so requests without a :path, or with a :path that neither begins with '/' nor is the asterisk-form '*', contrary to RFC 9113 section 8.3.1, were not rejected. Affected Scenarios: Deployments of Apache bRPC behind a front proxy or gateway that performs access control (ACL) decisions on the literal request path, where the bRPC server accepts HTTP or HTTP/2 traffic from that proxy. In such deployments an attacker can send a path containing empty path segments to reach a resource that the front proxy intended to block. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3512 Note: After applying the fix, HTTP and HTTP/2 request paths containing empty path segments (consecutive slashes) are rejected by default, and HTTP/2 :path values that are empty or neither begin with '/' nor equal '*' are rejected. Deployments that depend on the previous lenient behavior can restore it by turning on the gflag -http_allow_empty_path_segments, which is not recommended for servers exposed to untrusted traffic.

Apache Software Foundation Apache bRPC

NULL pointer dereference in the RTMP protocol implementation in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to crash the server (denial of service) via a crafted createStream command. Root Cause: When an RTMP service rejects a createStream request by returning a null stream from RtmpService::NewStream(), the server sends an error response to the client. If writing this rejection response fails (for example, because the client closes the connection immediately after sending the createStream command), the error-handling path in RtmpChunkStream::OnCreateStream() dereferences the null stream pointer to access stream->_onfail_id, causing the process to crash. Affected Scenarios: Run an Apache bRPC RTMP server whose RtmpService::NewStream() may return null (i.e., the service rejects createStream requests). A remote client that sends a createStream command and then closes the connection before the rejection response is written can crash the server. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3508

Apache Software Foundation Apache bRPC

A data race in the RDMA transport of Apache bRPC (versions < 1.18.0) allows a remote client to crash the server process (denial of service) when RDMA is enabled at build time and runtime. Root Cause: When a bRPC server negotiates RDMA with a client, the handshake completes on the TCP fd, but the server kept parsing that fd afterwards as if it were still an RPC channel. The TCP-fd input stream and the RDMA QP input stream (driven by CQ events) shared the same Socket::_read_buf, preferred_index and parsing_context without synchronization. In addition, CQ event processing could start while the handshake parsing was still in progress, and the handshake ACK phase could consume bytes belonging to the next protocol. A remote, unauthenticated client that has completed the RDMA handshake can send data on the TCP fd at the same time RDMA messages are being processed, corrupting the shared input buffer and parser state and crashing the server process (CWE-362, availability impact). Affected Scenarios: Use a bRPC server with RDMA support enabled (built with BRPC_WITH_RDMA and serving rdma:// / SOCKET_MODE_RDMA sockets) and accept connections from untrusted clients. Deployments without RDMA are not affected. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3505

Apache Software Foundation Apache bRPC

A reachable assertion in Apache bRPC (version < 1.18.0) on all platforms allows a malicious remote peer to crash the process, resulting in denial of service. Root Cause: When a Socket with health checking enabled fails, Socket::WaitAndReset closes its file descriptor while the event dispatcher may still be delivering an input event (EPOLLIN/EVFILT_READ) that was fetched for the just-closed fd. If the health check then succeeds and revives the Socket, Socket::Address succeeds again while the fd is still -1 (the next write reconnects on demand). In that window, Socket::OnInputEvent hits CHECK(!(events & EPOLLIN)) (or the kqueue equivalent) because the Socket is addressable but has no fd. CHECK failures terminate the process when bRPC is built with glog or when the gflag -crash_on_fatal_log is enabled (CHECK always terminates in OFFICIAL_BUILD/NDEBUG builds as well). Affected Scenarios: Applications using bRPC clients with health check enabled (-health_check_interval). A malicious remote peer that the client connects to can deliberately abort connections and immediately accept the health check probes, racing connection teardown against health check revival to trigger the assertion and abort the process. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3510 Note: After applying the fix, stale input events on a Socket revived without an fd are silently dropped instead of triggering the assertion. No user-visible interface or wire protocol is changed.

Apache Software Foundation Apache bRPC

A Thrift client in Apache bRPC (version < 1.18.0, built with WITH_THRIFT which is off by default) can be crashed by the server peer it talks to. When the server returns a T_EXCEPTION reply whose exception struct is malformed, the client decodes it without catching what Apache Thrift throws (TProtocolException, TTransportException or std::length_error). The exception unwinds out of the bthread task function and the process calls std::terminate(), terminating the whole process along with every other in-flight RPC. This is the client response path, so the adversary is the server peer, which THREAT_MODEL.md treats as untrusted. It requires a WITH_THRIFT build (off by default). How to Fix: 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3500

Apache Software Foundation Apache bRPC

Enforceable assertion in the streaming feature of Apache bRPC (version < 1.18.0) on all platforms allows a remote attacker to crash the server process by sending a malformed stream feedback frame. Root Cause: When handling FRAME_TYPE_FEEDBACK frames, bRPC calls Stream::SetRemoteConsumed() which contains CHECK(_cur_buf_size > 0) and unconditionally asserts CHECK(buf.IsEmpty()) on the frame payload. A feedback frame that carries an unexpected payload, or a feedback frame received on a stream where flow control is disabled (cur_buf_size == 0), reaches these assertions. On failure, CHECK failures abort the process, allowing an unauthenticated single client (once a stream is established) to terminate the server and cause a denial of service. Affected Scenarios: Use bRPC server with the streaming control feature (Stream API) served from untrusted network. How to Fix: 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3494 The fix rejects malformed feedback frames with EPROTO and closes only the affected stream instead of crashing the whole process, and it bounds buffer shrinking so cur_buf_size never drops to 0 while flow control is enabled.

Apache Software Foundation Apache bRPC

Uncontrolled resource consumption in the streaming RPC component of Apache bRPC (version < 1.18.0) allows a remote attacker to exhaust server memory and cause denial of service by sending a single RPC request that declares an excessive number of streams. Root Cause: In the streaming RPC feature, a client can declare multiple streams in one RPC request by putting extra stream identifiers into the repeated field `stream_settings.extra_stream_ids` of the RPC meta. On the server side, `StreamAccept` creates one response stream for every stream identifier declared by the request, without limiting the number of streams accepted in a single RPC. The request body size is only bounded by `max_body_size` (default 64MB), which is enough to carry millions of stream identifiers. Each accepted stream allocates its own bthread execution queue and associated resources, so a single crafted request can make the server create a huge number of streams and exhaust memory, leading to denial of service. Affected Scenarios: Use a bRPC server that serves streaming RPC and calls `StreamAccept` to accept streams from untrusted clients. How to Fix: (Choose one of the following options)  1. Upgrade bRPC to the 1.18.0 version. 2. Apply this patch: https://github.com/apache/brpc/pull/3493 Note: The fix adds a new gflag `stream_max_streams_per_request` with a default value of 64. Requests declaring more streams than the limit are rejected before any response stream is created. Applications that legitimately need to accept more than 64 streams in one RPC must raise this flag; otherwise such requests will fail after applying the fix.

Apache Software Foundation Apache bRPC

Unbounded memory accumulation in the stream message reassembly path of Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to exhaust the memory of a server (denial of service) by sending an endless sequence of continuation data frames. Root Cause: The streaming RPC protocol bounds every single data frame by max_body_size, but a fragmented stream message accumulates continuation frames into one buffer (_pending_buf) without any limit on the accumulated size. A malicious peer that can open a stream can therefore keep sending continuation frames to make the receiver accumulate an arbitrarily large in-memory message. Since the default flow-control settings (socket_max_streams_unconsumed_bytes=0) do not throttle the sending rate, the receiver's memory grows until the process runs out of memory and crashes or becomes unavailable. Affected Scenarios: Services that accept streams from untrusted clients (for example using brpc::StreamAccept or brpc::StreamCreate with the built-in streaming protocol) are affected. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3489 Note: The fix limits the accumulated payload of a fragmented stream message to max_body_size (default 64MB). When the accumulated payload exceeds the limit, the pending fragments are released and the stream is closed with error EMSGSIZE. After applying the fix, legitimate fragmented stream messages larger than max_body_size will be rejected; you can adjust the gflag max_body_size to change the limit.

Apache Software Foundation Apache bRPC

An out-of-bounds read vulnerability exists in the streaming RPC client of Apache bRPC (versions 1.11.0 through  1.17.0) on all platforms. A client that creates multiple streams in a single RPC expects the server response to carry exactly one extra_stream_id for every additional stream. The response handling path indexed the returned identifiers using the locally created stream count without first validating the size of the returned list, so a malicious or compromised server (or an on-path attacker) can trigger an out-of-bounds read in the client by returning a malformed StreamSettings response with fewer extra_stream_ids than expected. This may crash the client process (denial of service) or leak unintended memory contents into subsequent stream handling; surplus identifiers have no valid client-stream mapping and are processed inconsistently. Root Cause: Since bRPC 1.11.0, a client can create multiple streams in one RPC via batch StreamCreate. The expected behavior is that the server response must return exactly (N-1) extra_stream_ids, where N is the number of locally created streams. In Controller::HandleStreamConnection, the response path reads extra_stream_ids[i-1] for each additional local stream without first comparing the returned list size with (N-1). If the server returns fewer identifiers, the read runs past the end of the returned list (out-of-bounds read); if it returns more, the surplus identifiers have no corresponding client-side stream. Affected Scenarios: A bRPC client using multi-stream RPC (creating more than one stream in a single RPC) that connects to an untrusted, malicious, or compromised server or to a server reached through an untrusted network path. The server sends a malformed StreamSettings response to trigger the issue. How to Fix: (Choose one of the following options)  1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3485 Note: The fix makes the client reject responses whose extra_stream_ids count does not exactly match the number of additional client streams. Such mismatched responses now fail the RPC with ERESPONSE and go through the existing stream cleanup path, instead of being partially processed.

Apache Software Foundation Apache bRPC

Missing authentication in the streaming RPC path of Apache bRPC (version < 1.18.0) on all platforms allows a remote attacker to bypass server authentication and inject or deliver streaming frames, when a server is configured with an Authenticator. Root Cause: When authentication is configured, streaming RPC frames are consumed directly by the streaming parser (ParseStreamingMessage) and never pass through InputMessenger's authentication hook, so an unauthenticated peer can exchange frames without being authenticated. In addition, a server-accepted stream is bound lazily to the first frame that happens to carry its id, so a stream could accept a frame carrying its id from a socket other than the socket that created the stream. Affected Scenarios: A bRPC server configured with authentication that serves streaming RPC from an untrusted network, or a deployment where a foreign connection can impersonate a stream by id, can be made to accept unauthorized streaming frames. How to Fix: Upgrade bRPC to 1.18.0, which fixes this issue, or apply the patch in PR https://github.com/apache/brpc/pull/3481. Note: The fix rejects streaming frames on server sockets when configured authentication has not completed, and keeps server-accepted streams bound to the socket of their creating RPC and rejects frames arriving from another socket. Authenticated streaming RPC behavior and the wire format are unchanged; only unauthenticated or foreign-socket frames are now rejected.

Apache Software Foundation Apache bRPC

Resource exhaustion in Apache bRPC (version < 1.18.0) on all platforms: multiple parsers that accept wire-controlled input bound no limit on the sizes declared by the client or on decompressed output, which attackers can use to drive disproportionate memory use and crash the process. Root Cause: 1) The gzip/zlib/snappy decompressors enforce no output limit: -max_body_size is checked against the compressed bytes only, so a cap-compliant body (e.g. 64 MiB) can decompress to tens of GiB. 2) The AMF string readers allocate the declared length before the bytes are actually available. 3) RTMP chunk headers may re-declare a message length mid-stream; the declared length was never bounded and the partial reassembly buffer kept growing. 4) The sofa-pbrpc parser does not bound meta_size. 5) mcpack2pb trusts wire-declared item counts for Reserve() and a string value_size of 0 underflows the buffer size, aborting the process. Affected Scenarios: Any bRPC service accepting gzip/zlib/snappy-compressed bodies or rtmp, sofa-pbrpc, or mcpack2pb messages from untrusted clients. How to Fix:(Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3476 Note: After the fix, requests whose decompressed size, RTMP message length, or mcpack declared count exceed the new limits are rejected. Operators who legitimately need larger values can raise the corresponding flag (-max_decompressed_body_size, max_body_size).

Apache Software Foundation Apache bRPC

Uncontrolled resource consumption in the HTTP/2 (h2) receive path of Apache bRPC (version < 1.18.0) on all platforms allows a remote unauthenticated attacker to crash the server or grow its memory without bound by sending crafted HTTP/2 frames. Root Cause: The h2 parser, enabled by default on every bRPC server port and used by h2/gRPC clients, trusts the peer to respect receive-side limits that bRPC advertises but never enforces: 1. SETTINGS_MAX_CONCURRENT_STREAMS defaulted to unlimited and was never checked on the server, letting a peer pin an unbounded number of pending streams per connection (~100x memory amplification). 2. SETTINGS_MAX_HEADER_LIST_SIZE defaulted to unlimited and was never enforced; 1-byte HPACK indexed references amplify a small HEADERS frame ~4000x into an unbounded decoded header list ("HPACK bomb"), and a never-completed HEADERS/CONTINUATION block accumulates memory without limit. 3. Control-frame acks (PING/SETTINGS acks, RST_STREAM, GOAWAY, WINDOW_UPDATE) unconditionally bypassed the -socket_max_unwritten_bytes write cap, so a PING flood combined with withheld TCP reads grew the connection buffer without the documented bound. 4. The HPACK dynamic table size update was validated against the protocol default (4096) instead of the advertised SETTINGS_HEADER_TABLE_SIZE, which together with the dynamic-table queue/accounting issue can desynchronize the decoder and dereference NULL (crash). Affected scenarios: Any bRPC server serving HTTP/h2/gRPC to an untrusted network, and any bRPC h2/gRPC client connecting to an untrusted backend. The h2 parser runs before any Authenticator check on the shared port. How to fix: Upgrade bRPC, or apply the patch in https://github.com/apache/brpc/pull/3474. Note: After applying the fix the following limits are enforced by default: - max_concurrent_streams: 1024 per connection (4294967295 restores unlimited). - max_header_list_size: 1 MiB decoded size per stream (4294967295 restores unlimited; -h2_client_max_header_list_size for clients). - h2 control-frame acks respect -socket_max_unwritten_bytes (-h2_ack_ignore_eovercrowded restores the old behavior). Requests exceeding these limits are rejected (RST_STREAM(REFUSED_STREAM) or a connection error).

Apache Software Foundation Apache bRPC

A reachable-assertion flaw in the HPACK header-compression decoder of the HTTP/2 (h2/gRPC) stack in Apache bRPC (version < 1.18.0) on all platforms allows a remote attacker to crash the server process by sending a crafted sequence of HPACK headers, resulting in a denial of service. Root Cause: In src/brpc/details/hpack.cpp, IndexTable::Init sizes the dynamic-table ring buffer as num_headers = max_size / (32 + 2), i.e. it assumes a minimum table entry of 34 bytes (name >= 1 byte + value >= 1 byte + 32 bytes of overhead). However, RFC 7541 section 4.1 specifies that the minimum entry size is 33 bytes, because the value may be empty (name >= 1 byte + value == 0 + 32 bytes). For the default 4096-byte table this allocates only 120 slots (4096/34). Eviction in AddHeader is driven by byte usage (_max_size), not by slot count, so a peer can add 121 minimal 33-byte entries (121*33 = 3993 <= 4096) without triggering eviction. The 121st AddHeader then hits CHECK(!_header_queue.full()), which aborts the process. Affected Scenarios: Use a bRPC server that serves HTTP/2 or gRPC requests (e.g. via the h2 protocol) from an untrusted network. The malicious header block is processed during HPACK decoding of incoming requests without authentication. How to Fix: (Choose one of the following options)  1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3462 Note: The fix sizes the dynamic table for the 33-byte minimum entry (max_size / (32 + 1)) and ensures at least one ring-buffer slot is kept when max_size is smaller than the minimum entry, so that initialization cannot fail on malloc(0).

Apache Software Foundation Apache bRPC

A heap use-after-free in the RTMP protocol component of Apache bRPC (versions < 1.18.0) allows a remote attacker to crash a bRPC RTMP server by sending a crafted Abort control message. No authentication or application-level request is required. Root Cause: When an RTMP Abort control message names the chunk stream that is currently being parsed (the chunk stream carrying the message itself), RtmpChunkStream::OnAbortMessage calls RtmpContext::ClearChunkStream, which deletes the RtmpChunkStream while its Feed() is still running. After the message handler returns, Feed() continues to access members of the deleted object, resulting in a heap-use-after-free. Affected Scenarios: bRPC servers that enable RTMP support (ServerOptions.rtmp_service set) and accept connections from untrusted networks. How to Fix: 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch:  https://github.com/apache/brpc/pull/3452 The fix skips clearing the chunk stream when the Abort message targets the chunk stream that is currently being parsed.