Recherche « MariaDB server »

MariaDB server · Mariadb mariadb

MariaDB server is a community developed fork of MySQL server. From 10.6.1 until 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2, the CONNECT engine plugin file-access UDFs json_file(), bson_file(), jfile_make(), bfile_make(), and jbin_file() are affected because each does not enforce FILE privilege or the secure_file_priv setting. A low-privileged attacker can trigger the issue by calling a CONNECT file-access UDF with a filesystem path, then invoke a CONNECT file-access UDF to access a filesystem path and read or write files that the database account is not authorized to access, subject to operating-system permissions. This issue is fixed in versions 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2.

MariaDB server · Mariadb mariadb

MariaDB server is a community developed fork of MySQL server. From 10.6.1 until 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2, ST_Area reads beyond the allocated buffer when processing invalid WKB for a MultiPolygon because the multi-polygon parser advances past a nested geometry header without first verifying enough input remains. A low-privileged remote attacker can supply malformed spatial data to disclose memory useful for bypassing ASLR as part of a multi-vulnerability chain. This issue is fixed in versions 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2.

MariaDB server · Mariadb mariadb

MariaDB server is a community developed fork of MySQL server. From 10.6.1 until 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2, MariaDB's ACL cache could generate the same database-privilege cache key for role and localhost user names that matched because both used an empty IP component. An attacker with CREATE USER could create the colliding principal and, when the original principal's database privileges were cached, exercise privileges assigned to the other account. This issue is fixed in versions 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2.

MariaDB server

MariaDB Connector/C is a C and C++ client library for connecting applications to MariaDB and MySQL databases. From 3.4.1 until 3.4.10, the MariaDB Connector/C libmariadb Zero-Configuration SSL authentication-switch logic checked certificate trust failure but did not reject a TLS hostname verification mismatch before selecting a non-hashing authentication plugin. An active man-in-the-middle attacker with a valid certificate for another hostname could request mysql_clear_password and obtain the database password inside the attacker-controlled TLS connection. Other MariaDB connectors are not affected. This issue is fixed in version 3.4.10.

MariaDB server · Mariadb mariadb

MariaDB server is a community developed fork of MySQL server. From 10.6.1 until 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2, the mysql_json plugin assumed that imported MySQL tables contained valid MySQL binary JSON data. A specially prepared MySQL table containing invalid JSON data could cause out-of-bounds reads, information disclosure, or a server crash. This issue is fixed in versions 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2.

MariaDB server · Mariadb mariadb

MariaDB server is a community developed fork of MySQL server. From 10.6.1 until 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2, the qc_info plugin could be confused by a query containing embedded null bytes. Reading information_schema.query_cache_info after such a query was cached could access data beyond the end of a heap-allocated buffer, potentially disclosing adjacent memory or crashing the server. This issue is fixed in versions 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2.

mariadb-corporation mariadb-connector-nodejs

MariaDB Connector/Node.js is used to connect applications developed on Node.js to MariaDB and MySQL databases. From 3.3.0 until 3.5.4, the zero-configuration TLS fingerprint-validation path calls Ed25519PasswordAuth.hash() through Authentication.validateFingerPrint, but Ed25519PasswordAuth.hash() references a seed identifier that is not in scope. Exposure requires a MariaDB server reached over TCP, TLS enabled with ssl: true or an ssl object whose rejectUnauthorized value is not false, a password set, no ssl.ca configured, and client_ed25519 negotiated as the authentication plugin. Under those conditions, a legitimate server, malicious server, or network attacker presenting a self-signed certificate can reach this path and cause a synchronous ReferenceError to escape the socket data handler. Under Node.js default uncaught-exception behavior, the client process terminates, causing denial of service. Configurations using a provided CA, rejectUnauthorized: false, another authentication plugin, or a Unix socket do not reach this vulnerable path. This issue is fixed in version 3.5.4.

mariadb-corporation mariadb-connector-r2dbc · org.mariadb r2dbc-mariadb

MariaDB Connector/R2DBC is a non-blocking MariaDB and MySQL client implemented in Java. Prior to 1.4.1, org.mariadb:r2dbc-mariadb does not gate clear-text password authentication plugins on transport encryption because the AuthenticationPlugin interface has no capability for a plugin to require a secure connection. A hostile or man-in-the-middle MariaDB server can send an AuthSwitchRequest naming mysql_clear_password or dialog (PAM) over a plain-TCP unencrypted connection, and AuthenticationFlow permits ClearPasswordPluginFlow or PamPluginFlow to return the user's password as cleartext bytes on the wire. The disclosed credentials can subsequently be used to authenticate directly to the database server. This issue is fixed in version 1.4.1.

mariadb-corporation mariadb-connector-r2dbc · org.mariadb r2dbc-mariadb

MariaDB Connector/R2DBC is a non-blocking MariaDB and MySQL client implemented in Java. Prior to 1.4.1, org.mariadb:r2dbc-mariadb encodes and decodes all character data under the assumption that the connection character set is UTF-8. A server can announce a mid-session change to character_set_client through the OK-packet session-state-tracking mechanism, including through SET NAMES executed by a stored routine or trigger, server configuration, or a hostile or man-in-the-middle server. If the new character set is not UTF-8, the driver continues to exchange UTF-8 while the server interprets the same bytes under a different encoding, causing silent data corruption and a client/server charset-confusion mismatch that can defeat byte-wise quoting or escaping. The fix accepts only utf8, utf8mb3, or utf8mb4 after initialization; any other value raises R2dbcNonTransientResourceException with SQLState 08000 and closes the connection. This issue is fixed in version 1.4.1.

mariadb-corporation mariadb-connector-j

MariaDB Connector/J is used to connect applications developed in Java to MariaDB and MySQL databases. Prior to 2.7.14, 3.3.5, 3.4.3, and 3.5.9, the connector encodes and decodes protocol text and performs client-side escaping under the assumption that the connection character set is UTF-8. The server can report a mid-session change to character_set_client through OK-packet session-state tracking, including a change caused by SET NAMES, a stored routine or trigger, server configuration, or a hostile server. If character_set_client changes to a non-UTF-8 value, the driver continues to read and write UTF-8 while the server interprets the same bytes under another encoding, causing silent data corruption and a client/server charset-confusion mismatch that can defeat byte-wise quoting or escaping. The fix accepts only utf8, utf8mb3, or utf8mb4 after initialization; any other value causes SQLException with SQLState 08000 and closes the connection. This issue is fixed in versions 2.7.14, 3.3.5, 3.4.3, and 3.5.9.

mariadb-corporation mariadb-connector-j

MariaDB Connector/J is used to connect applications developed in Java to MariaDB and MySQL databases. Prior to 2.7.14, 3.3.5, 3.4.3, and 3.5.9, PAM dialog authentication can be coerced into transmitting the account password over an insecure connection. The mysql_clear_password plugin is gated behind a secure transport, but the sibling PAM handler SendPamAuthPacketFactory, named dialog by the server, does not declare that requirement and inherits the default secure-required value false; older branches implement the same affected behavior in SendPamAuthPacket. A hostile or man-in-the-middle server can send an Authentication Switch Request for dialog over plain TCP, causing the driver to return the user's password in cleartext when sslMode=DISABLE and restrictedAuth=null, which is the default configuration. Properly verified TLS and local Unix sockets are not exposed to this transport vector. This issue is fixed in versions 2.7.14, 3.3.5, 3.4.3, and 3.5.9.

mariadb-corporation mariadb-connector-j

MariaDB Connector/J is used to connect applications developed in Java to MariaDB and MySQL databases. Prior to 2.7.14, 3.3.5, 3.4.3, and 3.5.9, when a Java application connects with sslMode=verify-full or sslMode=verify-ca, supplies a password, and does not configure serverSslCert or trustStore, Connector/J can accept an untrusted self-signed certificate through the fallbackToSystemTrustStore=true ephemeral trust manager and record its certFingerprint for later identity binding. The OK-packet and authentication-switch paths enforce the certificate fingerprint, but the initial-handshake path does not. HandshakeResponse.encode() can therefore build and send a mysql_clear_password response before checking certFingerprint != null && !isMitMProof(), sslMode, or whether the authentication plugin is resistant to a man-in-the-middle, and the initial path also bypasses restrictedAuth. An active man-in-the-middle or hostile server can present a self-signed certificate, claim to be MariaDB, select mysql_clear_password as the initial authentication plugin, and receive the full database password before the connection is rejected. This issue is fixed in versions 2.7.14, 3.3.5, 3.4.3, and 3.5.9.

mariadb-corporation mariadb-connector-nodejs

MariaDB Connector/Node.js is used to connect applications developed on Node.js to MariaDB and MySQL databases. Prior to 3.2.4, 3.3.3, 3.4.6, and 3.5.3, MariaDB Connector/Node.js permits SQL injection when attacker-controlled Buffer parameters are escaped client-side under the big5, gbk, sjis, cp932, or gb18030 client character sets. PacketOutputStream.writeBufferEscape in lib/io/packet-output-stream.js escaped bytes without the charset-aware getMbRecognizer logic in lib/misc/charset-mb.js. The server SQL lexer runs my_ismbchar before escape processing, so an attacker-controlled lead byte can consume the inserted 0x5C backslash as a multibyte trail byte and leave the following 0x27 quote unescaped, terminating the string literal and allowing arbitrary SQL. The default utf8mb4 character set and parameters sent through the execute binary prepared-statement path are not affected. Successful exploitation can expose or modify data available to the database account. This issue is fixed in versions 3.2.4, 3.3.3, 3.4.6, and 3.5.3.

mariadb-corporation mariadb-connector-nodejs

MariaDB Connector/Node.js is used to connect applications developed on Node.js to MariaDB and MySQL databases. Prior to 3.2.4, 3.3.3, 3.4.6, and 3.5.3, MariaDB Connector/Node.js can disclose an account password when PAM dialog authentication is negotiated over an insecure transport. In lib/cmd/handshake/auth/pam-password-auth.js and lib/cmd/handshake/authentication.js, the SendPamAuthPacketFactory behavior for the server-side plugin dialog lacked the secure-transport gate applied to mysql_clear_password. With the default sslMode=DISABLE and restrictedAuth=null settings, a hostile or on-path server can send an Authentication Switch Request for dialog over plain TCP, causing the connector to return the account password in cleartext. Properly verified TLS and a local Unix socket prevent this path, while fingerprint-only server identity validation is not sufficient. This issue is fixed in versions 3.2.4, 3.3.3, 3.4.6, and 3.5.3.

typeorm

TypeORM is a TypeScript and JavaScript ORM for Node.js that supports PostgreSQL, MySQL, MariaDB, SQLite, SQL Server, Oracle, and other databases. Prior to versions 0.3.31 and 1.1.0, typeorm migration:generate embeds database schema metadata into JavaScript or TypeScript template literals in src/commands/MigrationGenerateCommand.ts, escaping backticks but not ${...} interpolation. An attacker with database schema write access can place a payload in column COMMENT or DEFAULT metadata, or another introspected schema string, and the JavaScript engine evaluates the payload when the generated migration is loaded through migration:run, import, or require. This issue is fixed in versions 0.3.31 and 1.1.0.