Vendredi 25 septembre 2026
28 CVE
-
CVE-2026-91766 5.9 Moyenne
PHP Group PHP · Php php
When the http:// stream wrapper follows a redirect it forwards the user-supplied Authorization, Cookie and Proxy-Authorization headers unchanged, even when the redirect target is a different host, a different port, or a downgrade from HTTPS to HTTP. A server that can steer a redirect therefore receives credentials that were only meant for the original origin. This is the same class of issue that libcurl fixed in 7.58.0 ( CVE-2018-1000007 https://github.com/advisories/GHSA-g7x2-hrfp-pv5f ).
-
CVE-2026-6103 3.3 Faible
PHP Group PHP · Php php
phar_tar_number() parses the octal size field of a TAR header into a uint32_t with no overflow check. The field is 11 octal digits wide and holds values up to 0x1FFFFFFFF, so a size above 0xFFFFFFFF silently wraps. The parser then skips the wrong number of data blocks and interprets attacker-controlled file content as the next TAR header, which lets a crafted archive inject entries that PharData reports and extracts as if they were genuine.
-
CVE-2026-84465 7.1 Élevée
zammad
Zammad is a web based open source helpdesk/customer support system. Prior to 7.1.2, when Zammad checks the digital signature on an incoming S/MIME-signed email, it does not verify that the signing certificate is genuinely trusted, it only checks whether a certificate with a matching name is already stored in the system. An attacker can create their own certificate using the name of a real, previously trusted sender and use it to send a forged email. Zammad will display that email with the same "validly signed" indicator as a genuine message from the real sender, even though the attacker never had access to that sender's actual certificate or private key. This issue is fixed in version 7.1.2.
-
CVE-2026-56726 5.1 Moyenne
zammad
Zammad is a web based open source helpdesk/customer support system. Prior to 7.0.2, this vulnerability breaks normal ticket isolation boundaries between agents. Any authenticated agent, even one with no active tickets assigned to them, can view the titles, status, labels, and URL links of GitHub/GitLab issues attached to any ticket in the system. This allows an internal user to systematically view GitHub/GitLab issue data linked by other agents or administrators across the organization by simply querying random or sequential ticket IDs. This vulnerability is fixed in 7.0.2.
-
CVE-2026-67409 6.5 Moyenne
rabbitmq-server · Broadcom rabbitmq server
RabbitMQ is a messaging and streaming broker. From 3.13.0 until 4.3.3, 4.2.9, 4.1.14, 4.0.23, and 3.13.18, JWKS Fetch Ignores HTTP Response Status Code - Signing Key Destruction Causes Authentication DoS (CWE-252). the JWKS key fetching mechanism in uaajwt.erl does not validate the HTTP response status code when downloading signing keys from the OAuth2 provider's JWKS endpoint. Non-200 responses (including 4xx and 5xx errors) are processed identically to successful responses. When the JWKS endpoint returns an error response with a valid-JSON body that lacks a keys field, all previously cached signing keys are destroyed, causing a persistent authentication denial of Files: deps/rabbitmqauthbackendoauth2/src/uaajwt.erl, lines 50-63 deps/rabbitmqauthbackendoauth2/src/uaajwks.erl, lines 5-7 deps/rabbitmqauthbackendoauth2/src/rabbitoauth2provider.erl, lines 98-107 Bug 1: HTTP status code ignored (uaajwt.erl:50-63): The Erlang httpc module returns {ok, {{HttpVersion, StatusCode, ReasonPhrase}, Headers, Body}}. The pattern {ok, {, , JwksBody}} matches ANY successful HTTP transaction Persistent authentication DoS: Once keys are destroyed, ALL OAuth2/JWT authentication fails for all users until a new successful JWKS refresh occurs Amplification: A single attacker can deny access to all legitimate OAuth2 users across the entire RabbitMQ. This issue is fixed in versions 4.3.3, 4.2.9, 4.1.14, 4.0.23, and 3.13.18.
-
CVE-2026-92161 9.8 Critique
FriendsOfFlarum oauth
FriendsOfFlarum OAuth allows users to log in to Flarum with GitHub, Twitter, Facebook, and other providers. Prior to 1.7.4 and 2.0.0-beta.4, the Discord OAuth provider does not check the verified field returned for an OAuth email before passing the address to Flarum core as trusted through provideTrustedEmail(). When Discord sign-in is enabled, an unauthenticated attacker who knows the email address of a Flarum user can configure a Discord account with that unverified address and a verified phone number, then sign in to cause Flarum to match the trusted address, link the attacker-controlled Discord identity to the existing user, and authenticate as the victim without a password or victim interaction. Exploitation requires that the victim's email address is not already associated with a Discord account, and it can compromise administrator accounts. Other bundled providers were not confirmed to be practically exploitable by this method because their relevant authentication flows return only verified or confirmed email addresses. This issue is fixed in versions 1.7.4 and 2.0.0-beta.4.
-
CVE-2026-100187 6.9 Moyenne
ail project ail framework
The Onion module in AIL Framework contained a performance shortcut in its URL extraction logic that accepted URLs as valid .onion targets based solely on a length check (exactly 69 characters) and a suffix check (ending in ".onion"), without performing proper hostname parsing or onion-domain validation. An unauthenticated attacker who could publish or control web content crawled by the framework could embed a crafted URL containing an IP address or non-onion hostname with a path ending in ".onion" that satisfied the length and suffix conditions. Such a URL would be extracted, its domain naively sliced from the string, and queued as a legitimate onion crawler task. This allowed unauthenticated content publishers to inject arbitrary non-onion targets into the crawler's task queue, influencing crawler behavior and potentially directing it toward unintended network resources. The vulnerability required no authentication, no user interaction, and only the ability to place crafted content in a location the framework would crawl. The security impact is a loss of integrity in the crawler's target selection: the framework processes and acts upon URLs that do not correspond to legitimate .onion services.
-
CVE-2026-98122 7.8 Élevée
Linux · Linux linux kernel
In the Linux kernel, the following vulnerability has been resolved: vxlan: mdb: Fix use-after-free in vxlan_mdb_remote_src_del() vxlan_mdb_is_valid_source(), which validates MDBE_ATTR_SOURCE and every MDBE_ATTR_SRC_LIST member, accepts the all-zeros address. A source list is only accepted on a (*, G) entry, whose source is the all-zeros address, and for each member of the list an (S, G) entry is derived from it by substituting the source. Entries are keyed by a plain memcmp() of struct vxlan_mdb_entry_key, so if MDBE_ATTR_SOURCE is present and holds the all-zeros address and the source list holds it as well, the derived (S, G) key is byte-identical to the (*, G) key and resolves to the same entry. Omitting MDBE_ATTR_SOURCE is not equivalent, as the key is then left with a zero address family. vxlan_mdb_remote_src_del() removes the forwarding entry of a source before freeing the source entry: vxlan_mdb_remote_src_fwd_del(vxlan, group, remote, &ent->addr); vxlan_mdb_remote_src_entry_del(ent); With the keys aliased, the first call deletes the remote of the entry that owns 'ent' instead of a separate (S, G) entry, and frees 'ent'. The second call then runs on the freed entry, and its hlist_del() reads ->pprev and ->next out of it and writes through them. Adding the (*, G) entry with NLM_F_REPLACE and no source list marks the all-zeros source for deletion and reaches this from the sweep at the end of vxlan_mdb_remote_srcs_replace(). BUG: KASAN: slab-use-after-free in __vxlan_mdb_add+0x1cd/0xd70 Read of size 8 at addr ffff888102852500 by task poc/84 __vxlan_mdb_add+0x1cd/0xd70 vxlan_mdb_add+0xc0/0x140 rtnl_mdb_add+0x157/0x2a0 rtnetlink_rcv_msg+0x207/0x5a0 Allocated by task 84: __kmalloc_cache_noprof+0x153/0x360 vxlan_mdb_remote_srcs_add+0x2eb/0x440 __vxlan_mdb_add+0x803/0xd70 Freed by task 84: kfree+0x14c/0x3b0 vxlan_mdb_remote_del+0x129/0x1a0 __vxlan_mdb_del+0x4f/0xe0 vxlan_mdb_remote_src_fwd_del.isra.0+0x162/0x1b0 __vxlan_mdb_add+0x1c5/0xd70 The MDB operations are netns-scoped, so an unprivileged user can perform them in a new user and network namespace. Reject the all-zeros address in vxlan_mdb_is_valid_source(), which covers both call sites. A (*, G) entry is expressed by omitting the source, so nothing legitimate is refused. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
-
CVE-2026-98104 – Non évaluée
Linux
In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: fix duplicate handle when node ID pool is exhausted gen_new_kid() falls back to returning max (htid | 0xFFF) when both idr_alloc_u32() ranges are full, instead of reporting an error. u32_change() trusts that value and inserts a new knode with a handle that is already live in the hash table, breaking handle uniqueness within the table's node ID space. The handle was never reserved in ht->handle_idr, so every later error path that does idr_remove(&ht->handle_idr, handle) removes the reservation of a different, live knode, which is then reused — one failed add compounds into further duplicates. The 4095 limit is per (table, bucket) — ht->handle_idr is per hash table and the range is derived from htid (bucketid), so a table with divisor 256 can legitimately hold 256*4095 knodes. The sibling helper gen_new_htid() has the same silent in-band failure: it returns 0 when the tp_c handle pool (1..0x7FF) is full, and u32_init() publishes the root hash table with handle 0 without checking. Two root tables with handle 0 alias in u32_lookup_ht(), allowing cross-tcf_proto knode add/lookup/delete. Add the same exhaustion check that the divisor path already has. Return an error so u32_change() fails with ENOSPC/ENOMEM when the node ID space is exhausted, and so u32_init() fails with -ENOMEM when the hash table ID space is exhausted. The extack message distinguishes pool exhaustion (-ENOSPC) from a transient allocation failure (-ENOMEM). Conditions to recreate the bug: - CONFIG_NET_SCHED=y, CONFIG_CLS_U32=y (or =m with module loaded) - Create a clsact qdisc on a device, then add 4095 u32 filters with auto-generated handles to fill the node ID space for the root hash table (single bucket). The 4096th auto-handle filter add triggers the duplicate handle (fh 800::fff reused). Reachable at Level 2 (unshare -Urn, namespace-local CAP_NET_ADMIN). - For gen_new_htid: create 2047 u32 proto entries on the same block to fill the tp_c handle pool, then create one more. The root table gets handle 0 and aliases with other handle-0 root tables.
-
CVE-2026-98070 8.1 Élevée
Linux
In the Linux kernel, the following vulnerability has been resolved: net/rds: acquire RDS_IN_XMIT in rds_tcp_reset_callbacks() rds_tcp_reset_callbacks() quiesces the transmit path by setting the path state to RDS_CONN_RESETTING and then waiting for RDS_IN_XMIT to be sampled clear before swapping the underlying socket and calling rds_send_path_reset(). Sampling the bit clear is not the same as owning it: rds_send_xmit() can re-acquire RDS_IN_XMIT right after the wait_event() returns. Its state recheck after taking the lock is a store-buffering pattern (the resetter writes the state and reads the bit, the sender writes the bit and reads the state) and acquire_in_xmit() is only an acquire operation, so on weakly ordered architectures both sides can miss each other's write and the transmit path then runs concurrently with rds_send_path_reset() rewriting cp_xmit_* state - which is exactly what the comment above rds_send_path_reset() tells its callers to prevent. Take the lock instead, hold it across the socket swap and rds_send_path_reset(), and release it with a wake-up at the end. The lock-ordering constraint documented above the wait still holds: the lock is acquired before lock_sock(), so a sender inside tcp_sendmsg() can never be waited on while we hold the socket lock. Two details of the old code go away with the same change: - t_sock is now read only after the lock is acquired. The old code cached it before waiting; the teardown in rds_conn_shutdown() releases that socket and clears t_sock, so a pointer cached before the wait can be stale by the time the accept path resumes. Reading it under RDS_IN_XMIT is what makes the exclusion complete once the teardown owns the same lock, which the next patch arranges; until then the teardown still only samples the bit, and the two paths remain as exposed to each other as they are today. - The old !osock early path called rds_send_path_reset() with no serialization at all. It now runs under the lock like the normal path. The conditional RDS_CONN_RESETTING transition of the previous patch happens before the socket check either way: a path found without a socket is either still connecting (its reconnect worker blocked on t_conn_path_lock) and legitimately goes RESETTING -> UP on the new socket, or it has been torn down meanwhile and is dropped. The in-function comment describing the old wait-based quiesce is rewritten to describe the lock-based one, and the stale block comment above the function (which still described a return value and an incomplete list of t_sock writers) is refreshed to name all four writers - the connect, accept, teardown and swap paths - and what serializes each of them.
-
CVE-2026-98022 – Non évaluée
Linux
In the Linux kernel, the following vulnerability has been resolved: net: cap tx_queue_len at S16_MAX to prevent oversized ring allocations Several subsystems allocate ring buffers sized by dev->tx_queue_len with no upper bound. An unprivileged user (via unshare -Urn) can set a huge tx_queue_len and exhaust global memory with ring allocations: - pfifo_fast: pfifo_fast_init() and pfifo_fast_change_tx_queue_len() allocate 3 skb_array rings of tx_queue_len entries each. - tun: tun_queue_resize() and the queue-attach path resize ptr_rings to tx_queue_len on the NETDEV_CHANGE_TX_QUEUE_LEN notifier. - tap (macvtap/ipvtap): tap_queue_resize() and tap_init() resize/init ptr_rings to tx_queue_len on the same notifier. netif_change_tx_queue_len() is the single entry point for IFLA_TXQLEN, sysfs, and the SIOCSIFTXQLEN ioctl. Cap new_len at S16_MAX (32767) there so the oversized value is rejected at set time. This takes effect whether the device is up or down, before dev->tx_queue_len is written, before any notifier fires, and before any ring is allocated. The "> S16_MAX" check also subsumes the previous unsigned-long truncation test, and a negative ifr_qlen from the ioctl lands far above the cap after conversion, so both old failure modes are covered by the one comparison. tx_queue_len is ambigious: both a per-ring sizing multiplier and a default queue-length/limit knob for consumers that allocate nothing at set time (pfifo/bfifo/gred/plug/sfb limits, htb direct_qlen, qfq max_classes, teql). 32767 is chosen as the largest value NLA_POLICY_FULL_RANGE can express for the u32 IFLA_TXQLEN policy in patch 2/3 while staying a legitimate queue length on high-BDP paths; the ring-memory trade-off of a shared knob is disclosed below. Conditions to recreate the bug: - CONFIG_NET_SCHED=y, CONFIG_VETH=y, CONFIG_USER_NS=y, CONFIG_NET_NS=y. - Unprivileged user in a fresh user+net namespace (unshare -Urn). - pfifo_fast: create veth pairs, set tx_queue_len to 500000, attach mq+pfifo_fast. ~28 iterations OOMs a 2GB guest. - tun: create 50 tun devices with IFF_MULTI_QUEUE, set tx_queue_len to 500000, open 8 queues each. ~1.6GB of ptr_ring allocations OOMs a 512MB guest. - tap: same as tun with IFF_TAP. ~960MB OOMs a 512MB guest. - On the fixed kernel the oversized tx_queue_len is rejected with -ERANGE at set time (all four paths: RTM_SETLINK, RTM_NEWLINK create, sysfs, ioctl - the latter two via this check, the former two via this check and the 2/3 parse policy respectively).
-
CVE-2026-97988 – Non évaluée
Linux
In the Linux kernel, the following vulnerability has been resolved: vhost: invalidate vring access on IOTLB transitions When VIRTIO_F_ACCESS_PLATFORM changes, cached vring pointers and IOTLB metadata are interpreted in a different address space. Keeping them across the transition can leave stale ring mappings in use. Clearing d->iotlb before taking the VQ locks also lets a worker observe a transient NULL d->iotlb and fall back to d->umem while translating a descriptor. Add a common vhost_clear_device_iotlb() helper for vhost-net and vhost-vsock. Take all VQ mutexes in index order before dropping the device-wide IOTLB, invalidate each VQ's cached ring access and metadata, clear pending IOTLB messages, and free the old table after the handoff. This serializes the transition with workers and prevents mixed address space mappings. On the first direct-to-IOTLB transition, invalidate the cached vring addresses. When an existing device IOTLB is replaced, preserve the GIOVA ring addresses and reset only the metadata cache. After clearing ACCESS_PLATFORM, userspace must configure the vring addresses for the new address mode. vhost_vq_invalidate_access() clears desc, avail, and used together. Treat the VQ as invalidated only when all three are NULL, since a single GIOVA address may legitimately be zero.
-
CVE-2026-97984 – Non évaluée
Linux
In the Linux kernel, the following vulnerability has been resolved: net: ipv6: Fix UDP length overflow with PMTU discover and big MTU This commit bounds cork->base.fragsize to IP6_MAX_MTU for UDP sockets to avoid a possible overflow of UDP length that triggers a WARN in udp_set_len_short when setsockopt IPV6_MTU_DISCOVER is set to IPV6_PMTUDISC_DO or IPV6_PMTUDISC_PROBE, and a large packet is sent over a netdev with an unusually large MTU. Steps to reproduce (included in the new selftest): 1. Set device MTU bigger than IP6_MAX_MTU. cork->base.fragsize will be set to that MTU in ip6_setup_cork. 2. Set IPV6_MTU_DISCOVER to IPV6_PMTUDISC_PROBE or IPV6_PMTUDISC_DO. It lets maxnonfragsize be set to device MTU (cork->fragsize) in __ip6_append_data, rather than to IP6_MAX_MTU. 3. Send 65528 bytes of payload (+8 bytes of UDP header, +40 bytes of IPv6 header). Device MTU allows it (it's only one byte bigger than IP6_MAX_MTU, and the device MTU is bigger than that). 4. The UDP length in the built packet is 65536, which overflows the 16-bit length field and triggers the WARN in udp_set_len_short. To avoid breaking sending UDP jumbograms over raw IPv6 sockets, limit the change to UDP sockets only. The original overflow bug with IPv6 and IPV6_PMTUDISC_DO seems to predate git history (verified reproduction on 2.6.21), was fixed later, and then reappeared in commit 427faee167bc ("net: ipv6: introduce ip6_dst_mtu_maybe_forward"), which is chosen as the Fixes tag here. The overflow with IPV6_PMTUDISC_PROBE reproduces since its introduction in commit 628a5c561890 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE").
-
CVE-2026-97974 – Non évaluée
Linux
In the Linux kernel, the following vulnerability has been resolved: ipv6: null-check fib6_node before accessing in __ip6_del_rt_siblings() syzbot reported a null-ptr-deref in __ip6_del_rt_siblings() [0]. The stack trace hinted towards a null dereference of rt->fib6_node when fn->leaf is accessed in __ip6_del_rt_siblings(). With RTNL_FLAG_DOIT_UNLOCKED set, inet6_rtm_delroute() operations run concurrently without acquiring the RTNL lock. In ip6_route_del(), the route lookup happens under rcu_read_lock() without acquiring table->tb6_lock. Between ip6_route_del() looking up the route and __ip6_del_rt_siblings() acquiring table->tb6_lock, another thread can modify the routing table. For example, when an ECMP route is replaced via RTM_NEWROUTE with NLM_F_REPLACE, fib6_add_rt2node() unlinks all old siblings and sets iter->fib6_node = NULL. A reproducer was found that triggers this [1]. Add a check to ensure rt->fib6_node is non-null before accessing it. [0] KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] RIP: 0010:__ip6_del_rt_siblings+0x31e/0x7c0 net/ipv6/route.c:4056 Call Trace: <TASK> ip6_route_del+0x1054/0x1110 net/ipv6/route.c:4232 inet6_rtm_delroute+0x5d7/0x6d0 net/ipv6/route.c:5669 rtnetlink_rcv_msg+0x802/0xc00 net/core/rtnetlink.c:7132 netlink_rcv_skb+0x226/0x4a0 net/netlink/af_netlink.c:2556 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x7f5/0x990 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1900 sock_sendmsg_nosec+0x13a/0x180 net/socket.c:800 __sock_sendmsg net/socket.c:815 [inline] ____sys_sendmsg+0x565/0x870 net/socket.c:2713 ___sys_sendmsg+0x2a5/0x360 net/socket.c:2767 __sys_sendmsg net/socket.c:2799 [inline] __do_sys_sendmsg net/socket.c:2804 [inline] __se_sys_sendmsg net/socket.c:2802 [inline] __x64_sys_sendmsg+0x1b7/0x290 net/socket.c:2802 do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline] do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> [1] https://gist.github.com/NamanGulati/0766a1159b6ca61928faaf87425ff899
-
CVE-2026-97971 7.8 Élevée
Linux
In the Linux kernel, the following vulnerability has been resolved: nstree: check listing permission before taking a namespace reference legitimize_ns() takes a reference on the candidate namespace before may_list_ns() has decided whether the caller may see it. The __free(ns_put) cleanup on the denied path can drop the last reference to a mount namespace while we still hold the rcu read lock, and put_mnt_ns() may sleep there. This is the same problem commit 2ec2aff3c8e2 ("ns: make sure reference are dropped outside of rcu lock") fixed for the put_user() path. Neither ns_requested() nor may_list_ns() needs a reference, both only look at the namespace type and at the caller's own namespaces, so do the checks first and take the reference last. Splat: Voluntary context switch within RCU read-side critical section! WARNING: kernel/rcu/tree_plugin.h:332 at rcu_note_context_switch+0x238/0x2a0, CPU#5: a/3442 CPU: 5 UID: 1000 PID: 3442 Comm: a Not tainted 7.0.0-30-generic #30-Ubuntu PREEMPT(lazy) RIP: 0010:rcu_note_context_switch+0x238/0x2a0 Call Trace: <TASK> __schedule+0xcf/0x650 schedule+0x27/0x90 schedule_preempt_disabled+0x15/0x30 __mutex_lock.constprop.0+0x550/0xaf0 __mutex_lock_slowpath+0x13/0x20 mutex_lock+0x3b/0x50 exp_funnel_lock+0xb2/0x260 synchronize_rcu_expedited+0xe7/0x220 namespace_unlock+0x26a/0x320 put_mnt_ns+0xd3/0x120 mntns_put+0xe/0x20 do_listns+0x13e/0x560 __do_sys_listns+0x126/0x2d0 __x64_sys_listns+0x20/0x30 x64_sys_call+0x2366/0x2390 do_syscall_64+0x105/0x5a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK>
-
CVE-2026-97618 – Non évaluée
Linux
In the Linux kernel, the following vulnerability has been resolved: io_uring/net: don't overconsume buffers when using MSG_TRUNC When a recv/recvmsg is issued with MSG_TRUNC and the incoming packet is larger than the provided buffer, the net layer returns the full length of the packet rather than the number of bytes actually copied into the buffer. As a result, io_uring advances more of the provided buffer ring than was actually filled. Use the actual filled region size to consume the buffer, but still return the full size to preserve MSG_TRUNC semantics. Take care with multishot, because that seems to already truncate the consumption based on the available payload size. This was reported in https://github.com/axboe/liburing/issues/1619. [axboe: fold in size_t unsigned fix]
-
CVE-2026-97535 – Non évaluée
Linux
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Bound VP index against VP_CTRL IOCB bitmap size The VP control IOCB selects its target virtual port by setting one bit in vp_idx_map, a fixed 16-byte (128-bit) array in both vp_ctrl_entry_24xx and vp_ctrl_entry_24xx_ext. qla25xx_ctrlvp_iocb() computes map = (vp_index - 1) / 8 and writes vce->vp_idx_map[map] without checking that map stays within the array. max_npiv_vports is taken from firmware and only sanitized to a MIN_MULTI_ID_FABRIC-aligned boundary, so it can legitimately be 191 or 255, and qla24xx_control_vp() only rejects vp_index >= max_npiv_vports. A vp_index above 128 therefore yields map >= 16 and an out-of-bounds write of up to 16 bytes past vp_idx_map, corrupting the trailing IOCB fields (or the adjacent request-ring slot on the 64-byte layout). Reject a vp_index that cannot be represented in the IOCB bitmap in qla24xx_control_vp(), and add a defensive ARRAY_SIZE() guard in qla25xx_ctrlvp_iocb() before the write. Adapters that report the usual 63 or 127 NPIV vports are unaffected.
-
CVE-2026-6088 5.1 Moyenne
Novadigits technologies StockAgile
Stored Cross-Site Scripting (XSS) vulnerability in StockAgile API and management panel. The vulnerability is present on the server side in REST endpoint '/inventory/configuration/categories' that allow the injection and persistence of malicious JavaScript code through parameters such as ‘code’, ‘name’, and other text fields. The scripts that are entered are not filtered or validated correctly before being displayed on the web panel that authenticated users can access. Exploiting this vulnerability could allow a remote, previously authenticated attacker to execute arbitrary JavaScript code.
-
CVE-2026-6087 5.1 Moyenne
Novadigits technologies StockAgile
Stored Cross-Site Scripting (XSS) vulnerability in StockAgile API and management panel. The vulnerability is present on the server side in REST endpoint '/inventory/configuration/categories' that allow the injection and persistence of malicious JavaScript code through parameters such as ‘code’, ‘name’, and other text fields. The scripts that are entered are not filtered or validated correctly before being displayed on the web panel that authenticated users can access. Exploiting this vulnerability could allow a remote, previously authenticated attacker to execute arbitrary JavaScript code.
-
CVE-2026-6086 5.1 Moyenne
Novadigits technologies StockAgile
Stored Cross-Site Scripting (XSS) vulnerability in StockAgile API and management panel. The vulnerability is present on the server side in REST endpoint '/inventory/configuration/serial-number-types' that allow the injection and persistence of malicious JavaScript code through parameters such as ‘code’, ‘name’, and other text fields. The scripts that are entered are not filtered or validated correctly before being displayed on the web panel that authenticated users can access. Exploiting this vulnerability could allow a remote, previously authenticated attacker to execute arbitrary JavaScript code.
-
CVE-2026-6085 5.1 Moyenne
Novadigits technologies StockAgile
Stored Cross-Site Scripting (XSS) vulnerability in StockAgile API and management panel. The vulnerability is present on the server side in REST endpoint '/inventory/configuration/serial-number-types' that allow the injection and persistence of malicious JavaScript code through parameters such as ‘code’, ‘name’, and other text fields. The scripts that are entered are not filtered or validated correctly before being displayed on the web panel that authenticated users can access. Exploiting this vulnerability could allow a remote, previously authenticated attacker to execute arbitrary JavaScript code.
-
CVE-2026-6084 5.1 Moyenne
Novadigits technologies StockAgile
Stored Cross-Site Scripting (XSS) vulnerability in StockAgile API and management panel. The vulnerability is present on the server side in REST endpoint '/inventory/configuration/variants' that allow the injection and persistence of malicious JavaScript code through parameters such as ‘code’, ‘name’, and other text fields. The scripts that are entered are not filtered or validated correctly before being displayed on the web panel that authenticated users can access. Exploiting this vulnerability could allow a remote, previously authenticated attacker to execute arbitrary JavaScript code.
-
CVE-2026-6083 5.1 Moyenne
Novadigits technologies StockAgile
Stored Cross-Site Scripting (XSS) vulnerability in StockAgile API and management panel. The vulnerability is present on the server side in REST endpoint ' /inventory/configuration/pricing-tiers' that allow the injection and persistence of malicious JavaScript code through parameters such as ‘code’, ‘name’, and other text fields. The scripts that are entered are not filtered or validated correctly before being displayed on the web panel that authenticated users can access. Exploiting this vulnerability could allow a remote, previously authenticated attacker to execute arbitrary JavaScript code.
-
CVE-2026-6082 5.1 Moyenne
Novadigits technologies StockAgile
Stored Cross-Site Scripting (XSS) vulnerability in StockAgile API and management panel. The vulnerability is present on the server side in REST endpoint '/inventory/configuration/payment-methods' that allow the injection and persistence of malicious JavaScript code through parameters such as ‘code’, ‘name’, and other text fields. The scripts that are entered are not filtered or validated correctly before being displayed on the web panel that authenticated users can access. Exploiting this vulnerability could allow a remote, previously authenticated attacker to execute arbitrary JavaScript code.
-
CVE-2026-93654 7.2 Élevée
codename065 Premium Packages – Sell Digital Products Securely
The Premium Packages – Sell Digital Products Securely plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'cart_items[][product_name]' Parameter in all versions up to, and including, 7.2.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The checkout REST route uses permission_callback set to __return_true and the invoice loader performs no order ownership check, meaning an unauthenticated attacker can both persist the payload and ensure it is renderable to any logged-in user who accesses the invoice.
-
CVE-2026-97846 6.8 Moyenne
Red Hat Build of Keycloak · Red Hat Single Sign-On 7
Keycloak provides a feature called mTLS holder-of-key binding which ensures that a token can only be used by the client that originally requested it by binding it to their digital certificate. A flaw was discovered where the new Standard Token Exchange V2 feature does not check for this certificate. This allows an attacker with stolen client credentials to obtain a standard, unrestricted token that bypasses these security protections.
-
CVE-2026-97731 7.1 Élevée
MinIO
MinIO through 7aac2a2 does not verify that every x-amz-* header present on a request also appears in the client-supplied X-Amz-SignedHeaders list. extractSignedHeaders() in cmd/signature-v4-utils.go iterates only the claimed list and never enumerates the headers that actually arrived, and thus a header that arrives unsigned is neither hashed into the canonical request nor rejected. Because cmd/api-router.go dispatches CopyObject on the presence of x-amz-copy-source alone, the holder of a presigned PUT URL scoped to a single object can add that header to the unmodified URL and cause a server-side copy, executed as the signer, of any object the signing key can read. A grant to write one object becomes a read of every bucket that key can reach. Amazon S3 rejects the equivalent request with HTTP 403 AccessDenied. The minio/minio GitHub repository was archived in April 2026; pgsty/silo before 1233254 is also affected.
-
CVE-2026-87720 7.6 Élevée
Gerrit
Incorrect Authorization (CWE-863) in project name normalization (ProjectUtil.stripGitSuffix) and ProjectCache eviction logic (ProjectCacheImpl) in Gerrit Code Review versions 2.16.0 through 3.12.9, 3.13.0 through 3.13.8, and 3.14.0 through 3.14.2 allows an authenticated user (or an unauthenticated user if the repository was previously public) to cause unauthorized disclosure of private repository content and durable restoration of revoked project-owner administrative privileges via crafted requests using repeated .git suffixes (such as project.git.git) across REST APIs, Gitiles, or SSH Git commands. Because Gerrit strips only a single terminal .git suffix when constructing the logical ProjectCache key while JGit (FileKey.lenient) resolves the suffixed alias to the same canonical bare repository on disk, revoking read access or removing owner rules on the canonical project name fails to evict the cached alias ProjectState during the cache validity window, enabling reads of newly created private commits or writes to refs/meta/config. This issue is fixed in Gerrit Code Review versions 3.12.10, 3.13.9, and 3.14.3.