Jeudi 24 septembre 2026

Linux

In the Linux kernel, the following vulnerability has been resolved: genirq/proc: Size interrupt directory names for 10-digit interrupt numbers /proc/irq/<n>/ directory names are built in `char name[10]` buffers with `sprintf(name, "%u", irq)`. Ten-digit IRQ numbers already need 11 bytes including the trailing NUL, and current sparse-IRQ configurations allow interrupt numbers in that range. Size the temporary name buffer for the current decimal form and switch to bounded formatting when creating or removing the proc entry.

Linux

In the Linux kernel, the following vulnerability has been resolved: mmc: davinci: avoid NULL deref of host->data in IRQ handler mmc_davinci_irq() returns early only when both host->cmd and host->data are NULL: if (host->cmd == NULL && host->data == NULL) { ... return IRQ_NONE; } So we may legitimately reach the rest of the handler with host->data == NULL (and therefore data == NULL). The DATDNE branch already guards against this with an explicit "if (data != NULL)" check, but the subsequent TOUTRD ("read data timeout") and CRCWR/CRCRD ("data CRC error") branches dereference data unconditionally: if (qstatus & MMCST0_TOUTRD) { data->error = -ETIMEDOUT; <-- NULL deref ... davinci_abort_data(host, data); } if (qstatus & (MMCST0_CRCWR | MMCST0_CRCRD)) { data->error = -EILSEQ; <-- NULL deref ... } If either bit is set in qstatus while host->data is NULL, the kernel will crash inside the IRQ handler. smatch flags this: drivers/mmc/host/davinci_mmc.c:933 mmc_davinci_irq() error: we previously assumed 'data' could be null (see line 914) Gate both branches on a non-NULL data, matching the existing pattern used by the DATDNE branch. No functional change for callers where data is non-NULL, which is the only case in which these branches did meaningful work before this change.

Linux

In the Linux kernel, the following vulnerability has been resolved: tty: serial: 8250: protect against NULL uart->port.dev in register serial8250_register_8250_port() conditionally copies uart->port.dev from up->port.dev only when up->port.dev is non-NULL: if (up->port.dev) { uart->port.dev = up->port.dev; ... } So if both the existing uart slot and up have a NULL ->dev, uart->port.dev remains NULL. The very next ACPI companion check then dereferences it unconditionally: if (!has_acpi_companion(uart->port.dev)) { has_acpi_companion() reads dev->fwnode without a NULL guard (include/linux/acpi.h), so this NULL-derefs the kernel for the remaining no-dev case rather than just skipping the mctrl_gpio_init() initialisation as intended. smatch flags the inconsistency: drivers/tty/serial/8250/8250_core.c:767 serial8250_register_8250_port() error: 'uart->port.dev' could be null (see line 719) Guard the call with a NULL check so register continues to work for callers that legitimately have no parent device (legacy non-OF/non-ACPI registrations). No functional change for callers that pass a non-NULL ->dev.

Linux

In the Linux kernel, the following vulnerability has been resolved: driver core: Avoid warning when removing a device while its supplier is unbinding During driver removal, the following warning can appear: WARNING: CPU: 1 PID: 139 at drivers/base/core.c:1497 __device_links_no_driver+0xcc/0xfc ... Call trace: __device_links_no_driver+0xcc/0xfc (P) device_links_driver_cleanup+0xa8/0xf0 device_release_driver_internal+0x208/0x23c device_links_unbind_consumers+0xe0/0x108 device_release_driver_internal+0xec/0x23c device_links_unbind_consumers+0xe0/0x108 device_release_driver_internal+0xec/0x23c device_links_unbind_consumers+0xe0/0x108 device_release_driver_internal+0xec/0x23c driver_detach+0xa0/0x12c bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 pci_unregister_driver+0x20/0x9c lan966x_pci_driver_exit+0x18/0xa90 [lan966x_pci] This warning is triggered when a consumer is removed because the links status of its supplier is not DL_DEV_DRIVER_BOUND and the link flag DL_FLAG_SYNC_STATE_ONLY is not set. The topology in terms of consumers/suppliers used was the following (consumer ---> supplier): i2c -----------> OIC ----> PCI device | ^ | | +---> pinctrl ---+ When the PCI device is removed, the OIC (interrupt controller) has to be removed. In order to remove the OIC, pinctrl and i2c need to be removed and to remove pinctrl, i2c need to be removed. The removal order is: 1) i2c 2) pinctrl 3) OIC 4) PCI device In details, the removal sequence is the following (with 0000:01:00.0 the PCI device): driver_detach: call device_release_driver_internal(0000:01:00.0)... device_links_busy(0000:01:00.0): links->status = DL_DEV_UNBINDING device_links_unbind_consumers(0000:01:00.0): 0000:01:00.0--oic link->status = DL_STATE_SUPPLIER_UNBIND call device_release_driver_internal(oic)... device_links_busy(oic): links->status = DL_DEV_UNBINDING device_links_unbind_consumers(oic): oic--pinctrl link->status = DL_STATE_SUPPLIER_UNBIND call device_release_driver_internal(pinctrl)... device_links_busy(pinctrl): links->status = DL_DEV_UNBINDING device_links_unbind_consumers(pinctrl): pinctrl--i2c link->status = DL_STATE_SUPPLIER_UNBIND call device_release_driver_internal(i2c)... device_links_busy(i2c): links->status = DL_DEV_UNBINDING __device_links_no_driver(i2c)... pinctrl--i2c link->status is DL_STATE_SUPPLIER_UNBIND oic--i2c link->status is DL_STATE_ACTIVE oic--i2c link->supplier->links.status is DL_DEV_UNBINDING The warning is triggered by the i2c removal because the OIC (supplier) links status is not DL_DEV_DRIVER_BOUND. Its links status is indeed set to DL_DEV_UNBINDING. It is perfectly legit to have the links status set to DL_DEV_UNBINDING in that case. Indeed we had started to unbind the OIC which triggered the consumer unbinding and didn't finish yet when the i2c is unbound. Avoid the warning when the supplier links status is set to DL_DEV_UNBINDING and thus support this removal sequence without any warnings.

Linux

In the Linux kernel, the following vulnerability has been resolved: rds: filter RDS_INFO_* getsockopt by caller's netns The RDS_INFO_* family of getsockopt(2) options reads several file-scope global lists that are not per-netns: rds_sock_info / rds6_sock_info, rds_sock_inc_info / rds6_sock_inc_info -> rds_sock_list rds_tcp_tc_info / rds6_tcp_tc_info -> rds_tcp_tc_list rds_conn_info / rds6_conn_info, rds_conn_message_info_cmn (for the *_SEND_MESSAGES and *_RETRANS_MESSAGES variants), rds_for_each_conn_info (for RDS_INFO_IB_CONNECTIONS) -> rds_conn_hash[] The handlers do not filter by the caller's network namespace. rds_info_getsockopt() has no netns or capable() check, and rds_create() has no capable() check, so AF_RDS is reachable from an unprivileged user namespace. As a result, an unprivileged caller in a fresh user_ns plus netns can read the bound address and sock inode of every RDS socket on the host, the peer address of incoming messages on every RDS socket on the host, the peer address and TCP sequence numbers of every rds-tcp connection on the host, and the peer address and RDS sequence numbers of every RDS connection on the host. The rds-tcp transport is reachable from a non-initial netns (see rds_set_transport()), so a one-shot init_net gate at rds_info_getsockopt() would deny legitimate per-netns visibility to rds-tcp callers. Instead, filter at each handler by comparing the netns of the caller's socket to the netns of the list entry, or to rds_conn_net(conn) for connection paths. Only copy entries whose netns matches the caller. Counters (RDS_INFO_COUNTERS) are aggregate statistics and remain global. Reproducer (KASAN VM, rds and rds_tcp loaded): an AF_RDS socket binds 127.0.0.1:4242 in init_net as root. A child process enters a fresh user_ns plus netns and opens AF_RDS there, then calls getsockopt(SOL_RDS, RDS_INFO_SOCKETS). Before this change, the child sees the init_net socket. After this change, the child sees zero entries. Drop the rds_sock_count, rds_tcp_tc_count, and rds6_tcp_tc_count globals. v2 used them for the size precheck and lens->nr; v3 replaced the precheck with a per-ns count from a first pass over the list, so the globals have no remaining readers. The matching increments and decrements in rds_create()/rds_destroy_sock() and rds_tcp_set_callbacks()/rds_tcp_restore_callbacks() go away with them. Reported by the kernel test robot under clang W=1.

Linux

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix response queue over-consumption in __qla_consume_iocb() qla24xx_process_response_queue() advances ring_ptr past the head IOCB before dispatching, so by the time __qla_consume_iocb() runs, ring_ptr already points at the first continuation IOCB. The function however looped purex->entry_count times starting at ring_ptr. As entry_count includes the head, this consumed one entry too many: it stamped RESPONSE_PROCESSED on the next, unrelated IOCB and advanced the ring past it, silently dropping a legitimate firmware response. The head IOCB's signature was also never marked. Mark the head processed and account for it, then consume only the entry_count - 1 continuation IOCBs, matching __qla_copy_purex_to_buffer().

Linux

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to zero post-EOF data when extending file size generic/794 4s ... - output mismatch (see /share/git/fstests/results//generic/794.out.bad) --- tests/generic/794.out 2026-06-12 08:46:32.766426241 +0800 +++ /share/git/fstests/results//generic/794.out.bad 2026-07-05 18:32:55.000000000 +0800 @@ -1,4 +1,16 @@ QA output created by 794 append_write +FAIL: non-zero data in gap [4080,4096) after shutdown+remount +000000 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a >ZZZZZZZZZZZZZZZZ< +* +001000 truncate_up ... (Run 'diff -u /share/git/fstests/tests/generic/794.out /share/git/fstests/results//generic/794.out.bad' to see the entire diff) Ran: generic/794 Failures: generic/794 Failed 1 of 1 tests Steps of generic/794: 1. write 4096 bytes to file w/ 0x5a 2. use fiemap to get PBA of first block in file 3. truncate file to 4080 4. umount; write 4096 bytes to file w/ 0x5a directly via PBA; mount 5. extend filesize via a) append 4096 from offset 4096, or b) truncate 8192, or c) fallocate 4096 from offset 4096 6. verify the gap is zeroed in memory [4080,4096) 7. sync range 4096 from offset 4096; shutdown -f (flush meta before shutdown) 8. umount; mount; verify [4080,4096) is zeroed or not. When extending file size (e.g. via truncate, fallocate, or write) across an unaligned EOF boundary, we need to ensure that post-EOF data in the partial page is zeroed out in pagecache and marked dirty, then writeback the cache to persist zeroed data before committing inode w/ updated i_size. This help to prevent stale disk data beyond the previous EOF from being exposed after remounting or crash recovery. Since f2fs is a LFS filesystem, we only support direct write via PBA in pinfile, and pinfile has section-aligned filesize, so in Android, there should no problem, but for other usage in different environment, let's fix this w/ fsync_mode=strict mount option.

Linux

In the Linux kernel, the following vulnerability has been resolved: of: fix out-of-bounds read in of_alias_scan() stem parser The stem parser tests isdigit(*(end - 1)) before checking end > start and so reads one byte before the property name when the name is empty or all digits. Check the bound first.