Semaine du 21 septembre au 27 septembre 2026

netty

Netty's HTTP/3 codec (io.netty:netty-codec-http3) versions 4.2.0.Final through 4.2.17.Final contain an uncontrolled resource consumption vulnerability in the QPACK encoder-stream instruction decoder (QpackEncoderHandler, installed on the peer-initiated unidirectional QPACK encoder stream, type 0x02). The handler accepts an attacker-declared string-literal length of up to Integer.MAX_VALUE (~2 GiB) for the Name Length and Value Length fields of the "Insert With Literal Name" instruction (RFC 9204 §4.3.3), with no per-instruction or per-literal length cap and no cumulation-size limit; the existing HTTP/3 limits (maxHeaderListSize, maxUnknownFramePayloadLength, DEFAULT_MAX_FIELD_SECTION_SIZE) are not applied to this handler. A remote, unauthenticated peer with an established HTTP/3 connection to a default Netty HTTP/3 server can declare a very large literal length and then trickle fewer bytes than declared, causing the ByteToMessageDecoder MERGE cumulator to retain and grow the per-connection buffer, and ultimately triggering a large byte-array allocation. This leads to unbounded per-connection heap growth and OutOfMemoryError, resulting in denial of service. Fixed in 4.2.18.Final.

netty

Netty's HTTP/3 codec (io.netty:netty-codec-http3) versions 4.2.0.Final through 4.2.17.Final contain a denial-of-service vulnerability in the QPACK prefixed-integer decoder (QpackUtil.decodePrefixedInteger), which does not bound the number of continuation bytes it will process. A remote, unauthenticated peer can open a QPACK unidirectional stream (type 0x02 encoder or 0x03 decoder) and send a first byte with all prefix bits set (e.g. 0xFF for a 7-bit prefix or 0x3F for a 5-bit prefix) followed by an endless run of 0x80 continuation bytes. The decoder returns -1 ('need more bytes'), so callers never consume the input, the ByteToMessageDecoder cumulator grows without bound, and each decode() invocation re-scans the whole accumulated buffer, yielding O(N^2) CPU cost. The result is unbounded per-connection heap growth (OutOfMemoryError) and event-loop CPU starvation, reachable in every configuration. Fixed in 4.2.18.Final.

netty

Netty's HTTP/3 codec (io.netty:netty-codec-http3) from 4.2.0.Final through 4.2.17.Final retains unbounded per-stream QPACK encoder state. QpackEncoder stores a queue and a dynamic-table index tracker for every encoded field section that references the QPACK dynamic table, keyed by the peer-controlled QUIC stream ID, and these entries are released only when the remote decoder sends a Section Acknowledgment or Stream Cancellation instruction — not when the HTTP/3 stream completes. There is no limit on the number of tracked streams, field sections, or retained bytes. A remote, unauthenticated HTTP/3 client can advertise a non-zero QPACK dynamic-table capacity, acknowledge the table insertion so the server reuses a dynamically indexed response header, and then omit all mandatory Section Acknowledgments while issuing sequential requests over a single QUIC connection, bypassing concurrent-stream limits and causing unbounded heap growth until the server exhausts memory (denial of service). Fixed in 4.2.18.Final.

PHP Group PHP

cleanup_xml_node() in the SOAP XML parser recurses once per XML nesting level with no depth limit. An unauthenticated attacker can post a SOAP request containing tens of thousands of nested elements to any SoapServer endpoint, exhaust the stack and crash the process. The same unbounded recursion exists in the SOAP value decoder and in the WSDL node search helper.

Linux

In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: rockchip: reject AV1 frames exceeding the tile capacity rockchip_vpu981_av1_dec_set_tile_info() indexes the tile group entry array by tile1 * tile_cols + tile0, reading up to tile_cols * tile_rows entries, lays out one descriptor per tile in the AV1_MAX_TILES tile_info buffer, and programs the real tile_cols / tile_rows into the hardware. The tile group entry control is a dynamic array sized to the number of entries userspace submitted, independent of tile_cols / tile_rows, so a frame that claims more tiles than entries reads past the array. A frame that claims more than AV1_MAX_TILES tiles also leaves the hardware programmed for more tiles than the descriptor buffer holds. Reject both in prepare_run(): tile_cols * tile_rows must not exceed the submitted entry count or AV1_MAX_TILES. The entry count is read via v4l2_ctrl_find() (ctrl->elems). This mirrors the bound the mediatek AV1 decoder already enforces.

Linux

In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate HEVC tile counts The stateless HEVC decoders read num_tile_columns_minus1 + 1 entries from column_width_minus1[] and num_tile_rows_minus1 + 1 from row_height_minus1[] and use them as tile-loop bounds, but std_validate_compound() does not bound these u8 counts. Reject a V4L2_CTRL_TYPE_HEVC_PPS with tiling enabled whose tile counts exceed the uAPI array capacity, mirroring the existing compound-control range checks.

Linux

In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate AV1 tile counts The stateless AV1 decoders use tile_info.tile_cols and tile_rows as loop bounds and as indices into the mi_*_starts[] and *_in_sbs_minus_1[] arrays, as the divisor for context_update_tile_id, and their product bounds the per-tile descriptor buffers, but std_validate_compound() does not bound these u8 fields. Reject a V4L2_CTRL_TYPE_AV1_FRAME whose tile_cols or tile_rows exceeds V4L2_AV1_MAX_TILE_COLS / _ROWS, or whose product exceeds V4L2_AV1_MAX_TILE_COUNT. A zero tile count is left to the consuming driver so the zero-initialised control that existing userspace submits is still accepted.

Apache Software Foundation Apache Qpid Broker-J · Apache qpid broker-j

Improper handling of property-encoding exceptions in AMQP 1.0-to-AMQP 0-10 message conversion allows authenticated message producers to disrupt delivery to AMQP 0-10 consumers via message properties that the target encoder does not handle correctly. This issue affects Apache Qpid Broker-J: through 10.1.0. Users are recommended to upgrade to version 10.1.1, which fixes the issue.

YunaiV ruoyi-vue-pro · zhijiantianya ruoyi-vue-pro

A vulnerability was identified in YunaiV/zhijiantianya ruoyi-vue-pro up to 2026.08. Affected is the function updateDemoOrderPaid of the file yudao-module-pay/src/main/java/cn/iocoder/yudao/module/pay/controller/admin/demo/PayDemoOrderController.java of the component Demo-order Payment Callback Handler. The manipulation of the argument ID leads to improper authorization. The attack can be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

square wire

Wire provides gRPC and protocol buffers for Android, Kotlin, Swift, and Java. Prior to 6.4.1 and 7.0.0-alpha04, Wire's Swift runtime ProtoReader.skipGroup(expectedEndTag:unknownFieldsWriter:) accepts a negative length for a LENGTH_DELIMITED field inside an unknown START_GROUP field. ProtoReader.readData() forwards the negative count to ReadBuffer.readData(count:), whose upper-bound-only check permits the value to reach Foundation Data(bytes:count:) and trigger an unrecoverable process trap instead of a catchable ProtoDecoder.Error. Any Swift process decoding untrusted protobuf bytes can be crashed without authentication, user interaction, or knowledge of the target schema. This issue is fixed in versions 6.4.1 and 7.0.0-alpha04.

Plex Media Server

Plex Media Server before 1.43.3.10861 allows an admin user to write arbitrary files that may be executed on load. The preference TranscoderH264Options is appended verbatim to x264's option string on every transcode. At startup, all .so files are run without signature, execute bit, or symbol checks.

vectordotdev vector

Vector is a high-performance observability data pipeline. From 0.15.0 until 0.57.0, the logstash source feeds each decompressed frame back into its decoder without limiting nested compression depth. An unauthenticated remote peer that can reach the default 0.0.0.0:5044 listener can send many nested compressed frames, causing recursive decoding that exhausts the worker thread stack and aborts the process. The same nested construction amplifies decompressed input, and process termination can halt log ingestion for every tenant on a shared pipeline. This issue is fixed in version 0.57.0.

Erlang OTP

Inefficient algorithmic complexity in the Erlang/OTP asn1 OBJECT IDENTIFIER decoder allows a remote unauthenticated attacker to cause denial of service by sending a crafted OID during the TLS handshake. The BER OID decoder asn1rtt_ber:dec_subidentifiers/3 in lib/asn1/src/asn1rtt_ber.erl and the equivalent PER helper asn1rtt_per_common:dec_subidentifiers/3 in lib/asn1/src/asn1rtt_per_common.erl accumulate a base-128 subidentifier into an unbounded integer using (Av bsl 7) + H per continuation byte. Each shift and addition on the growing accumulator is linear in the number of bits already accumulated, giving quadratic total work in the size of a single subidentifier. The JER helper asn1rtt_jer:json2oid/1 in lib/asn1/src/asn1rtt_jer.erl exhibits the same class of unbounded-integer parsing when decoding a dot-separated OID from JSON. A DER-encoded OBJECT IDENTIFIER with one very large arc (approximately 262 KB of continuation bytes) consumes roughly 13 seconds of CPU on typical hardware. The vulnerable decoder is generated into every ASN.1 module that contains an OBJECT IDENTIFIER, including OTP-PUB-KEY which is reached during X.509 certificate parsing via public_key:pkix_decode_cert/2. This decoder runs before any signature or trust chain verification, so any Erlang service that parses peer TLS certificates is exposed: the default for TLS clients (which always parse the server certificate) and for mutual-TLS servers (which parse client certificates). This vulnerability is associated with program files lib/asn1/src/asn1rtt_ber.erl, lib/asn1/src/asn1rtt_per_common.erl and lib/asn1/src/asn1rtt_jer.erl and program routines asn1rtt_ber:dec_subidentifiers/3, asn1rtt_per_common:dec_subidentifiers/3 and asn1rtt_jer:json2oid/1. This issue affects OTP from OTP 17.0 before OTP 27.3.4.18, OTP 28.5.0.7, and OTP 29.1.1, corresponding to asn1 from 3.0 before 5.3.4.3, 5.4.3.1, and 5.5.2. Whether OTP before OTP 17.0, corresponding to asn1 before 3.0, is affected is unknown.

Net::IDN::Punycode versions before 2.590 for Perl hang, crash or return a wrong label via unvalidated malformed UTF-8 in encode_punycode. Neither backend checks that its input is well-formed UTF-8, so a string with the UTF-8 flag set over malformed bytes, as the :utf8 PerlIO layer produces from any malformed input, reaches the encoder unchecked. On perl 5.32 and later the XS backend reports a malformed sequence with a length of `(STRLEN)-1`, so the scan steps back one byte instead of forward and never ends. On earlier perls the XS returns a valid label for a different name. The pure-Perl backend runs a regex over the flagged string. Depending on the bytes, it aborts with SIGBUS on perl 5.28 and later, dies with a panic, or returns a wrong label. The documented conversion functions match the label against Unicode properties first and that match dies on such a string, so only a direct call to encode_punycode reaches the defect. The decoder is not affected. A direct caller encoding attacker-supplied bytes hangs, crashes or gets a label for a name the input never held.

Net::IDN::Punycode versions before 2.590 for Perl allow CPU exhaustion via quadratic insertion cost when decoding a long label in decode_punycode. The XS backend inserts each decoded code point into a UTF-8 buffer and finds the insertion point by scanning that buffer from the start, one character at a time. The scan runs once per code point over the output built so far, so the cost is quadratic in the label length. The pure-Perl backend downgrades its input to bytes so that substr can index it directly, but takes its working copy before the downgrade, so when the input carries the UTF-8 flag every substr on the copy scans from the start, with the same quadratic cost. Nothing bounds the label length in the to-Unicode direction. The 63-byte DNS limit is checked only when converting to ASCII, so domain_to_unicode and uts46_to_unicode pass an attacker-supplied label of any length to the decoder.

kap-sh zapros

Zapros, a Python HTTP client, prior to version 0.14.0 is vulnerable to denial of service via memory exhaustion. The issue affects all callers who streamed compressed responses relying on the chunk size — explicit (`iter_bytes(chunk_size=...)`) or the default — to bound memory. The decoder ignored that bound, so a chunk could be far larger than requested and a single compressed response could overflow memory. Version 0.14.0 contains a patch. Some workarounds are available. Read the still-compressed body with `Response.iter_raw()` / `Response.async_iter_raw()`, which bypass the built-in decoders, and decompress it yourself with an explicit output-size bound (e.g. `zlib`'s `max_length`), aborting once a configured limit is exceeded. Where feasible, send `Accept-Encoding: identity` to disable response compression so bodies are not decompressed client-side. Avoid decoding response bodies from untrusted servers.

envoyproxy envoy

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's optional oghttp2 upstream HTTP/2 codec accepts a response trailer HEADERS frame without END_STREAM. Envoy completes and deferred-deletes the ActiveRequest while oghttp2 keeps the stream open, leaving ClientStreamImpl with a dangling response_decoder_ reference. A later frame on the stream can dispatch through the freed object and crash the process. The relevant scope boundary is that the default nghttp2 codec rejects the malformed trailers, and the trigger is upstream-only with oghttp2 enabled. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1.

envoyproxy envoy

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's HttpDatagramHandler caches the current RequestDecoder when Capsule Protocol is enabled. Stream recreation, including an internal redirect, replaces the ActiveStream and updates EnvoyQuicServerStream but does not update the handler's cached pointer. A subsequent HTTP/3 datagram can call decodeData through the freed decoder, causing invalid virtual dispatch and a process crash. The relevant scope boundary is that hTTP/3 datagrams and Capsule Protocol must be enabled, and the request must enter a stream-recreation path such as an internal redirect. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1.