Lundi 21 septembre 2026

A session invalidation flaw exists in x-ui 0.3.2. The full user object is stored in a client-side signed cookie, and authentication only checks that a user object can be retrieved from the cookie without re-validating against the database or any session version. When an administrator changes the username or password, previously issued session cookies are not revoked, so an attacker who holds a pre-change admin cookie can continue accessing and operating the management interface after the credentials have been rotated.

envoyproxy envoy

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's URL normalization does not recognize dot and dotdot path segments when they carry semicolon parameters. A request such as /user/..;foo=bar/admin is therefore not canonicalized to /admin even when path normalization is enabled. If an upstream interprets the segment according to RFC 3986 while Envoy applies routing or RBAC to the uncollapsed path, a remote client can cause path confusion and bypass path-based security policy. The relevant scope boundary is that the security consequence depends on a downstream/upstream path interpretation mismatch or a path-based Envoy decision. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1.

envoyproxy envoy

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy normally matches the raw request path, while servlet backends such as Apache Tomcat strip semicolon matrix parameters from each path segment before resolving the resource. Envoy's ignore_path_parameters_in_path_matching option instead truncates at the first semicolon and still does not match per-segment backend behavior. A remote client can use a parameterized protected segment, or a parameter on an earlier segment, to make Envoy select an unprotected fallback while the backend resolves the protected resource. The relevant scope boundary is that the bypass requires both a path-based Envoy decision and a backend that strips semicolon parameters per segment. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1.

envoyproxy envoy

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's Utility::copyInternetAddressAndPort and QUIC client-address paths reconstruct scoped IPv6 addresses through addressAsString and Ipv6Instance. The string includes a percent scope identifier that inet_pton cannot parse, causing an exception or abort. Kernel-provided scoped IPv6 destinations in ORIGINAL_DST transparent-proxy deployments, and affected QUIC connection paths, can therefore terminate the process. The relevant scope boundary is that the HTTP use_http_header override rejects scoped addresses earlier; the advisory's crash path requires a kernel-provided original destination or the affected QUIC path. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1.

supabase realtime

Supabase Realtime provides Broadcast, Presence, and Postgres Changes via WebSockets. Prior to 2.111.2, Realtime authorization does not correctly honor the per-extension presence.read row-level security policy when a private-channel client is allowed presence.write but explicitly denied presence.read. Under that differential policy, the client can receive presence_diff messages containing other members' presence metadata, including application-defined location, online-status, roster, viewing, or typing information. Deployments with uniform presence visibility have no differential, and postgres_changes row data is unaffected. This issue is fixed in version 2.111.2.

Sync-in server

Sync-in Server is an open-source platform for file storage, sharing, collaboration, and syncing. Prior to version 2.4.0, `POST /api/app/sync/register` accepts credentials and a TOTP code to register a desktop sync client. On a failed TOTP, `SyncClientsManager.register()` calls `updateAccesses(user, ip, false)`, which hits a freeze branch that writes `passwordAttempts` back unchanged. The counter never reaches `USER_MAX_PASSWORD_ATTEMPTS` (10) and the lockout gate never fires. A successful guess returns a `{clientId, clientToken}` pair. The token can be exchanged via `POST /api/app/sync/auth/cookie` for a full JWT. While the code is valid, the attacker can also call `POST /api/auth/2fa/disable` to permanently remove MFA. Version 2.4.0 patches the issue.

envoyproxy envoy

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's HTTP external-authorization client can retain a stale request callback after a request is rejected. When RawHttpClientImpl::onSuccess later processes the authorization response, it can invoke callbacks_ after the callback owner has been destroyed, causing a use-after-free and process crash under production traffic. The relevant scope boundary is that the vulnerable path uses the HTTP ext_authz client; the advisory does not establish the same trigger for unrelated filters. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1.

envoyproxy envoy

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's ProdClusterManagerFactory::allocateConnPool dereferences transport_socket_options while selecting an HTTP/3 connection pool without first checking whether the pointer is null. LoadBalancerContext implementations used by synthetic, mirror, health-check, and async-client calls can return no transport-socket options. With auto_config and HTTP/3 enabled, routine traffic reaching one of those contexts can crash an Envoy worker. The relevant scope boundary is that the affected branch requires HTTP/3 in the protocol set and a context that supplies no transport-socket options. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1.

warp-tech warpgate

Warpgate is an open source SSH, HTTPS and MySQL bastion host for Linux. From 0.23.0 until 0.27.3, HTTP API token authentication resolves ConfigProvider::validate_api_token into RequestAuthorization::UserToken without enforcing the owning user's allowed_ip_ranges against the trusted client address in warpgate-protocol-http/src/common.rs. An attacker holding a leaked, phished, or exfiltrated X-Warpgate-Token can therefore use it from a prohibited network location. Deployments without allowed_ip_ranges are unaffected, and HTTP target proxying plus SSH, MySQL, PostgreSQL, RDP, VNC, and Kubernetes paths do not accept this vulnerable HTTP token flow. This issue is fixed in version 0.27.3.

warp-tech warpgate

Warpgate is an open source SSH, HTTPS and MySQL bastion host for Linux. Prior to 0.25.6, copy_server_request in warpgate-protocol-http/src/proxy.rs forwards a client-supplied x-warpgate-username header before inject_own_headers appends the authenticated username. Because the request builder preserves repeated values, a proxied backend that trusts the first x-warpgate-username value can authorize an authenticated attacker as another user. The same forwarding policy also accepts the reserved x-warpgate-authentication-type header, and warpgate-common/src/http_headers.rs does not exclude either reserved identity header. This issue is fixed in version 0.25.6.

fabiolb fabio

Fabio is an HTTP(S) and TCP router for deploying applications managed by consul. From 1.6.6 until 1.7.2, the CVE-2025-48865 fix in proxy/http_headers.go uses protectHeaders for a hardcoded set of forwarded headers but omits the operator-configured ClientIPHeader, TLSHeader, and RequestID names. In proxy/http_proxy.go, HTTPProxy.ServeHTTP calls addHeaders to set these trust headers before Go ReverseProxy processes the inbound Connection header, allowing an unauthenticated client to name and remove the configured headers before the request reaches the backend. Deployments that enable the corresponding proxy.header options can therefore lose client-IP, TLS-termination, or request-correlation signals used by backend authorization and auditing; the options are empty by default, and the hardcoded protected forwarded headers are unaffected. This issue is fixed in version 1.7.2.

zephyrproject zephyr

The experimental USB host stack allocates a per-device configuration-descriptor buffer, udev->cfg_desc, from the dedicated usb_device_heap in usbh_device_set_configuration() (subsys/usb/host/usbh_device.c). On three failure paths — a failed full-length GET_DESCRIPTOR(CONFIGURATION) read, a mismatch between the short and full descriptor reads, and a rejected descriptor in parse_configuration_descriptor() — the buffer was released with k_heap_free() but the pointer was left dangling. The cleanup in usbh_device_free() is guarded only by if (udev->cfg_desc != NULL), so it frees the same block a second time. The path is driven entirely by the attached peripheral: usbh_device_connect() calls usbh_device_init(), which ends in usbh_device_set_configuration(), and on failure usbh_device_connect() calls usbh_device_free(). On v4.4.x this happens during the same enumeration, with no unplug required; on v4.1.0–v4.3.x the second free instead arrives via dev_removed_handler()/dev_connected_handler() in subsys/usb/host/usbh_core.c, so it requires a removal or duplicate-connect event after the failed enumeration — a sequence the attached device fully controls. A malicious or malformed USB device only has to answer the first 9-byte configuration-descriptor request with a well-formed header and then fail any of the three checks, for example by returning a full descriptor whose interface count disagrees with bNumInterfaces, or by answering the second read with different bytes. The result is a double free on usb_device_heap. On builds where lib/heap hardening is active (the current default CONFIG_SYS_HEAP_HARDENING_BASIC), sys_heap_free() detects the already-free chunk and calls k_panic(), giving a deterministic, peripheral-triggered denial of service of the USB host. On builds without that detection — earlier releases, or CONFIG_SYS_HEAP_HARDENING_NONE — the second free manipulates a chunk already on the free list, corrupting the heap's free list so that later allocations can return overlapping or invalid blocks. Exploitation beyond denial of service is bounded by the fact that usb_device_heap is a small dedicated heap (CONFIG_USBH_USB_DEVICE_HEAP, default 1024 bytes) whose only client is this descriptor buffer, and by CONFIG_USB_HOST_STACK being marked experimental and disabled by default. The fix sets udev->cfg_desc = NULL after every k_heap_free(), making the cleanup guard sound.

CuteNews v.2.1.2 is vulnerable to Cross Site Scripting (XSS). Improper neutralization of the __referer value 2.0.1 allows a remote attacker to execute arbitrary JavaScript in the context of an authenticated user's session via a javascript: URI rendered as an unsanitized clickable link on the msg_info page.

Apache Software Foundation Apache Airflow · Apache airflow

When a request to the Airflow core API carries both a session cookie and an explicit `Authorization: Bearer` token, Airflow resolves the caller from the cookie and ignores the bearer token, inverting the intended precedence of bearer over cookie. The request then executes -- and is recorded in the audit log -- as the cookie's principal rather than the identity the client explicitly presented. Only Apache Airflow 3.3.0 and 3.3.1 are affected. Earlier releases do not contain the code path that caches the cookie-derived user, and are not vulnerable. Exploiting this requires an attacker to first place a valid session cookie of their own into the victim's browser or client: for example by cookie tossing from a sibling subdomain, through cross-site scripting in a separate application sharing a parent domain, or via a shared workstation. Deployments that host the Airflow UI on a domain shared with other applications are therefore the most exposed; a deployment on a dedicated domain with no co-hosted applications is not reachable this way. The consequence is principal confusion and misattributed audit records rather than a direct privilege escalation. Users of 3.3.0 or 3.3.1 should upgrade to Apache Airflow 3.3.2 or later, which resolves the caller from the explicitly supplied credential whenever one is present.

1millionbot AI Chatbot Platform (SaaS) de 1millionbot.

Cross-Site Scripting (XSS) vulnerability due to inadequate input sanitisation in the client-side rendering engine of the 1millionbot AI Chat Platform. An unauthenticated remote user could cause external hyperlinks to be rendered in the web interface by sending messages containing Markdown syntax and certain unsanitised content blocks. The impact is limited to the user’s own interactive session; no compromise of internal infrastructure, access to third-party data or impact on administrative panels has been identified.

Unknown RestroPress

The RestroPress WordPress plugin before 3.4.6 does not validate a client-supplied item add-on price on the server side when items are added to or updated in the cart, allowing unauthenticated users to set an arbitrary price and place orders for an attacker-chosen total, down to and including zero.

Red Hat Build of Keycloak · Red Hat Single Sign-On 7

A flaw was found in the Admin REST API of Keycloak, an open-source identity and access management solution. The issue occurs because the API uses a per-request in-memory cache to resolve clients by their unique identifier without verifying if the client belongs to the realm specified in the request path. This allows an administrator with limited privileges to read or modify sensitive client configurations in the master realm by accessing them through a realm they control. Successful exploitation could lead to the exposure of client credentials or the redirection of administrative login attempts to malicious sites.