Veille CVE

Semaine du 14 septembre au 20 septembre 2026

22 CVE

Critique 2 Élevée 9 Moyenne 9 Faible 0 Non évaluée 2 Exploitées (KEV) Tri : plus récentes « Isc bind » ✕
  1. CVE-2026-93202 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: i3c: master: Fix recursive locking during device registration i3c_master_register_new_i3c_devs() registers newly discovered devices while holding i3c_bus_normaluse_lock(), a down_read(). device_register() can immediately probe the device, and probe callbacks typically invoke I3C helpers that take i3c_bus_normaluse_lock() again, leading to a recursive acquisition of the same rwsem. rwsems do not support recursive read locking and can deadlock when a writer is waiting. See the "Recursive read locks" section of Documentation/locking/lockdep-design.rst. For example, with Intel LPSS I3C, LOCKDEP generates a WARNING like: # echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/unbind # echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/bind WARNING: possible recursive locking detected kworker/5:1/94 is trying to acquire lock: ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_device_match_id+0x45/0x370 but task is already holding lock: ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_master_reg_work_fn+0x21/0x5f0 Fix this by separating device creation from device registration. Populate desc->dev under the maintenance lock, collect the devices that still need registration into a local list, then release the lock before calling device_register(). Finally retake the lock and clean up any devices that failed to register. Use the maintenance lock rather than the normal-use lock while adding device objects. A write-side maintenance lock prevents readers from observing a partially initialized desc->dev during initial device population, or desc->dev disappearing if registration fails. The local list requires a list node, so add a list node member to struct i3c_device.

  2. CVE-2026-90169 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: free preauth sessions on connection teardown SMB3.1.1 multichannel binding preserves the preauthentication hash in a preauth_session between the NTLM negotiate and authenticate requests. The binding NTLM negotiate allocates this object and returns STATUS_MORE_PROCESSING_REQUIRED. If the client disconnects before it sends the authenticate request, neither the authenticate nor error cleanup paths free the object. Release any remaining preauthentication sessions when tearing down the connection. Initialize the list when allocating the connection so that this cleanup is safe regardless of the negotiated dialect.

  3. CVE-2026-80218 7.6 Élevée

    team-alembic ash_authentication

    Improper Authentication vulnerability in team-alembic AshAuthentication allows an attacker holding a sign-in token for one authenticated resource to be signed in as a user of a different resource. AshAuthentication.Strategy.Password.SignInWithTokenPreparation.extract_primary_keys_from_subject/2 parses the JWT sub claim (for example user?id=1) with URI.parse/1 and keeps only its query string, discarding the path segment that names the subject the token was issued for. Nothing else restores that binding: AshAuthentication.Jwt.verify/3 checks the signature, exp, nbf, jti and the library-version claims, the purpose check only requires sign_in, and the remaining comparison is over primary-key field names, which are identical across resources. The WebAuthn sign-in and remember-me preparations carry copies of the same helper and drop the path in the same way. The magic link sign-in path pins the subject name against the resource and is not affected. This issue affects ash_authentication: from 3.10.5 before 4.15.0 and from 5.0.0-rc.0 before 5.0.0-rc.14.

  4. CVE-2026-42784 7.4 Élevée

    Red Hat Ansible Automation Platform 2.6 for RHEL 9 · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 9 · Red Hat Cost Management On-Premise 1

    A flaw was found in sequoia-openpgp. The library incorrectly infers key flags for older certificates when a key flags subpacket is missing, leading to a discrepancy in how key capabilities are viewed. This key flag confusion allows an attacker to bypass the back-signature check. Consequently, an attacker can illegitimately bind an arbitrary subkey to their own certificate and forge signatures, completely compromising cryptographic integrity.

  5. CVE-2026-80274 7.5 Élevée

    ISC BIND 9

    If a BIND resolver sends a query for a DNSSEC-signed authoritative zone, and the authoritative server replies with a valid wildcard answer and signed NSEC3 proof, followed by an unsigned NSEC at the same owner name, it will trigger an unexpected program exit. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

  6. CVE-2026-77119 5.9 Moyenne

    ISC BIND 9

    A validly signed NSEC3 from an unrelated sibling zone may be accepted as an insecurity proof, downgrading a secure delegation and letting a forged unsigned answer through. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

  7. CVE-2026-76163 7.5 Élevée

    ISC BIND 9

    If BIND is loaded with a "`named.conf`" file that contains no global "`options`" block, an attacker can send a query of QTYPE TKEY which may cause an assertion failure and subsequent unexpected program exit. This issue affects BIND 9 versions 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, and 9.20.9-S1 through 9.20.27-S1.

  8. CVE-2026-75029 5.3 Moyenne

    ISC BIND 9

    In a query response, an attacker may send `named` multiple copies of a record that should only exist once (such as an SOA record). If the RDATA is the same on all the copies, the record is appended to the in-memory RDATA set, which can cause increased memory usage of the negative cache and possibly lead to other memory attack vectors. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

  9. CVE-2026-19668 5.3 Moyenne

    ISC BIND 9

    A BIND recursive resolver may experience excessive resource consumption if it encounters large numbers of a particular kind of invalid DNSSEC record. Default limits on "max-records-per-type" and "max-types-per-name" help mitigate the exposure. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

  10. CVE-2026-19666 7.5 Élevée

    ISC BIND 9

    On a resolver configured to use ``dns64``, if an applicable answer from the authoritative server is malformed in a specific way, the resolver `named` process will exit unexpectedly. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

  11. CVE-2026-19033 6.5 Moyenne

    ISC BIND 9

    For a secondary zone with transfers restricted by TSIG, `named` may start to serve the data provided in a zone transfer before the final message with the TSIG signature arrives. This could allow an attacker that does not actually possess a valid TSIG signature to send unauthorized zone contents to a secondary server. Although no TSIG signature ever arrives, `named` does not rollback to the pre-transfer state. To exploit the vulnerability, the transfer must be a multi-message TCP IXFR, as described by RFC 8945. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

  12. CVE-2026-81736 7.5 Élevée

    ISC BIND 9

    If a BIND resolver has cached a tree of SVCB/HTTPS AliasMode records, and is then queried for the root of that tree, the resolver will spend disproportionate CPU time constructing the response. This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.18.11-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

  13. CVE-2026-81563 7.5 Élevée

    ISC BIND 9

    A BIND resolver encountering an SVCB/HTTPS AliasMode record referencing 14 or more SVCB/HTTPS ServiceMode records may fail to properly deallocate internal resources. If this happens repeatedly, resource exhaustion will eventually prevent the resolver from performing new recursive lookups. This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.18.11-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

  14. CVE-2026-78301 5.8 Moyenne

    ISC BIND 9

    A malformed zone may contain an NS or DNAME node above its origin, which `named` treats as a zone cut. If an attacker inserts a malformed zone into a BIND authoritative server (e.g., via zone transfer), queries for names inside the configured zone then lose authoritative status and return an out-of-zone delegation. On a server that also provides recursion BIND can follow this locally sourced cut and cache attacker-supplied data, affecting names outside the configured zone. This situation persists as long as the malformed zone remains in the zone database. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

  15. CVE-2026-77692 7.5 Élevée

    ISC BIND 9

    An attacker can cause `named` to abort by sending a crafted DNS-over-HTTPS request with a cryptographically invalid SIG(0) record, and then closing the transport connection prematurely. This issue affects BIND 9 versions 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, and 9.20.9-S1 through 9.20.27-S1.

  16. CVE-2026-19941 5.9 Moyenne

    ISC BIND 9

    An inapplicable NSEC record may be accepted by a `named` resolver as proof that no wildcard exists, which could allow an attacker at the same or an upstream level of the zone name to mask the existence of a victim's wildcard record. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

  17. CVE-2026-19667 7.5 Élevée

    ISC BIND 9

    If an attacker-controlled authoritative server can produce a negative answer that is exactly 65536 bytes, then a flaw in `named` results in a negative cache entry of 0 bytes. When this entry is subsequently read, `named` aborts. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

  18. CVE-2026-19662 5.9 Moyenne

    ISC BIND 9

    An attacker may be able to cause a `named` resolver to abort. The attack requires inducing the victim resolver to send multiple queries for a DNSSEC-signed zone hosted by an authoritative server under the control of the attacker. If the auth responds with a particular sequence of crafted answers, and those answers arrive in a particular order with particular timing, the `named` resolver will encounter a use-after-free bug, and abort. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

  19. CVE-2026-59971 10.0 Critique

    designcomputer mysql_mcp_server

    MySQL MCP Server is a Model Context Protocol server that enables secure interaction with MySQL databases. Prior to 0.4.2, setting MCP_TRANSPORT=sse causes src/mysql_mcp_server/server.py to construct SseServerTransport without security_settings or enable_dns_rebinding_protection, while the Starlette routes /, /sse, and /messages/ have no authentication and the service binds to 0.0.0.0 by default. A network attacker can directly reach execute_sql, or can use DNS rebinding to make a victim's browser relay same-origin requests to a locally bound service, and supply a query that reaches cursor.execute(query). This allows unauthenticated disclosure and modification of the configured database; when the MySQL account has FILE privileges, the same access can read or write server files and may enable code execution. The default stdio transport is not affected. This issue is fixed in 0.4.2.

  20. CVE-2026-57139 9.8 Critique

    MervinPraison PraisonAI

    PraisonAI is a multi-agent teams system. From 1.5.0 until 1.7.2, MCPServer.startHttp() in src/praisonai-ts/src/mcp/server.ts binds without a host restriction and forwards every HTTP POST request to handleRequest() without authentication or authorization. Any network client that can reach the port can call tools/list, tools/call, resources/read, or prompts/get, causing registered handlers to run with server-side credentials and process privileges or disclose registered data. An initial remediation was released in version 1.7.2.

  21. CVE-2026-55846 6.2 Moyenne

    allure-framework allure2

    Allure 2 is the version 2.x branch of Allure Report, a multi-language test reporting tool. Prior to 2.39.0, the HTTP server started by allure serve and allure open uses URI.getPath() in Commands.setUpServer() in allure-commandline/src/main/java/io/qameta/allure/Commands.java and passes the percent-decoded request path to reportDirectory.resolve() without normalizing the result or confirming that it remains inside that directory. An unauthenticated client that can reach the server can submit parent-directory segments, including percent-encoded segments, and cause serveFile() to return any regular file readable by the Allure process. The server binds to localhost by default, but the --host option can expose it to other systems, and local users, adjacent containers, or browser-origin attacks may reach a local listener. This can disclose credentials, configuration, source code, build secrets, and other CI/CD data. This issue is fixed in version 2.39.0.

  22. CVE-2026-53708 6.6 Moyenne

    IBM mcp-context-forge · IBM mcp-contextforge-gateway

    ContextForge is an AI gateway, registry, and proxy that provides centralized discovery, guardrails, and management for MCP, A2A, and REST or gRPC APIs. Prior to 1.0.3, the /admin/gateways/test call site in mcpgateway/admin.py calls validate_gateway_test_url() in mcpgateway/common/validators.py to resolve and reject private, loopback, link-local, and cloud-metadata addresses, but ResilientHttpClient later resolves the original hostname again without binding the validated address. When MCPGATEWAY_ADMIN_API_ENABLED is enabled, an attacker with a database-backed role containing explicit gateways.read permission can use DNS rebinding to return a public address during validation and a private or metadata address during connection, bypassing ssrf_blocked_networks and ssrf_dns_fail_closed because those controls apply only to the validation-time result. The endpoint's allow_admin_bypass=False setting means a bootstrap-only virtual platform-admin identity without a database role is not sufficient. Successful exploitation can reach internal services and cloud metadata, expose cloud credentials, access internal APIs, or probe internal network ports. This issue is fixed in version 1.0.3.