Veille CVE

Mercredi 16 septembre 2026

39 CVE

  1. CVE-2026-92802 4.3 Moyenne

    kanbn kan

    kan through 0.6.0 fails to properly validate board creation permissions in the GitHub project import endpoint, allowing guests to create boards despite lacking board:create permission. Attackers can bypass authorization checks by using the importProjects mutation to create boards while remaining blocked on direct creation paths.

  2. CVE-2026-92783 8.1 Élevée

    yeti-platform yeti

    Yeti through 2.11.0 fails to validate caller permissions in the DELETE /api/v2/rbac/{id} endpoint, allowing users with read access to delete access control relationships. Attackers can revoke the owner's grant and permanently lock legitimate owners out of objects.

  3. CVE-2026-92773 7.1 Élevée

    triggerdotdev trigger.dev

    Trigger.dev before 4.6.0 fails to verify that an authenticated user controls a GitHub App installation before binding it to their organization. Attackers can claim another user's GitHub App installation by replaying state cookies and supplying sequential installation identifiers, gaining unauthorized access to the victim's repositories.

  4. CVE-2026-76413 8.2 Élevée

    Cisco Secure Firewall Management Center (FMC)

    A vulnerability in Cisco Adaptive Security Device Manager (ASDM) single sign-on (SSO) handler for Cisco Secure FMC Software could allow an unauthenticated, remote attacker to log in as the Cisco ASDM administrator user. This vulnerability is due to improper management of the Cisco ASDM SSO token. An attacker could exploit this vulnerability by performing session token forgery techniques. A successful exploit could allow the attacker to log in as the administrator user and, by repeating this action, keep legitimate administrators locked out of the ASDM indefinitely.

  5. CVE-2026-20071 3.8 Faible

    Cisco Identity Services Engine Software

    A vulnerability in the SSID bring-your-own-device (BYOD) onboarding workflow of Cisco ISE could allow an unauthenticated, adjacent attacker to hijack the onboarding session of another user and access protected 802.1X networks.   This vulnerability is due to insufficient authentication checks that are performed while a user is being onboarded. An attacker could exploit this vulnerability by spoofing the legitimate user and triggering a redirection to the guest web portal. A successful exploit could allow the attacker to take over the user session and gain access to the protected 802.1X network.

  6. CVE-2026-86071 3.7 Faible

    junrar

    Junrar is an open source Java RAR archive library. Prior to version 7.6.1, LocalFolderExtractor in src/main/java/com/github/junrar/LocalFolderExtractor.java can create directories outside the intended extraction root when processing a crafted archive entry. LocalFolderExtractor.createFile() validates only the final canonical file path, while LocalFolderExtractor.makeFile() creates intermediate path segments with unchecked mkdir() calls. An entry can therefore make the final path resolve inside the destination while causing intermediate directory creation outside it, enabling filesystem pollution or file-versus-directory squatting that can make later security-sensitive writes fail. The demonstrated impact is directory creation, not unconditional arbitrary file-content write. This issue is fixed in version 7.6.1.

  7. CVE-2026-73443 4.7 Moyenne

    Arista Networks EOS

    On affected platforms running Arista EOS with VRRPv2 IP-AH authentication configured, an unauthenticated attacker within the same layer 2 network segment on which VRRP is running can capture a legitimate authenticated VRRP advertisement and replay it indefinitely. Replayed advertisements can be used to advertise stale VRRP state, for example to prevent a backup router from taking over the virtual gateway after the original master has gone down, resulting in a denial of service for hosts using the virtual gateway address.

  8. CVE-2026-42784 7.4 Élevée

    Red Hat Ansible Automation Platform 2.6 for RHEL 9 · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 9 · Red Hat Cost Management On-Premise 1

    A flaw was found in sequoia-openpgp. The library incorrectly infers key flags for older certificates when a key flags subpacket is missing, leading to a discrepancy in how key capabilities are viewed. This key flag confusion allows an attacker to bypass the back-signature check. Consequently, an attacker can illegitimately bind an arbitrary subkey to their own certificate and forge signatures, completely compromising cryptographic integrity.

  9. CVE-2026-92615 6.6 Moyenne

    Red Hat Advanced Cluster Management for Kubernetes 2 · Red Hat Edge Manager 1

    A flaw was found in flightctl. The configureRepoHTTPSClient() function in the device-render worker builds a per-repository tls.Config (which may include InsecureSkipVerify, a custom CA bundle, or tenant-supplied mTLS client certificates) and installs it into go-git's process-global client.Protocols map via gitclient.InstallProtocol("https", ...). Because the worker renders devices for multiple organizations concurrently from a shared goroutine pool, whichever tenant's repository configuration is written last wins for all in-flight git.Clone calls. This race condition can cause one tenant's TLS settings, including InsecureSkipVerify or mTLS client credentials, to leak into another tenant's git operations.

  10. CVE-2026-19607 5.3 Moyenne

    Red Hat build of Keycloak 26.4 · Red Hat build of Keycloak 26.4.16 · Red Hat build of Keycloak 26.6 · Red Hat build of Keycloak 26.6.7

    A flaw was found in the first-broker-login flow of the keycloak-services component. This component handles the initial authentication and account linking when a user logs in via an external identity provider. The issue allows an attacker to register a matching username on an external provider to trigger a collision in Keycloak, which results in the legitimate user being locked out of their account.

  11. CVE-2026-92381 3.5 Faible

    PbootCMS

    A weakness has been identified in PbootCMS up to 3.2.22. This affects the function decode_string of the file apps/admin/controller/content/ContentController.php of the component Template Rendering. This manipulation of the argument Title causes cross site scripting. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. The reported GitHub issue was closed with the reason "completed".

  12. CVE-2026-82964 8.8 Élevée

    Gen Digital Avast Free Antivirus, Avast One, Avast Premium Security, Avast Ultimate, Avast Business Security · Gen Digital AVG Antivirus Free, AVG Internet Security, AVG Ultimate · Gen Digital Norton Antivirus Plus, Norton 360 Standard, Norton 360 Deluxe, Norton 360 Advanced

    Improper preservation of permissions in the Avast sandbox minifilter driver (aswSnx.sys) on Windows allows a local, low-privileged attacker executing inside the sandbox to escape file isolation and escalate to SYSTEM. When the sandbox virtualizes a file it copies the original security descriptor, but the driver opened the virtualization target object with GENERIC_WRITE and FILE_WRITE_ATTRIBUTES only, omitting WRITE_DAC. Every attempt to apply the original DACL therefore failed, and the failure was discarded silently, leaving virtualized copies of sensitive files with permissive permissions. Because the IRP_MJ_CREATE callback additionally did not strip WRITE_DAC for sensitive directories, a sandboxed process could rewrite the security descriptor of a virtualized object, read the virtualized copy of the SAM database, extract local NTLM password hashes and execute code as SYSTEM. The absence of an IRP_MJ_SET_SECURITY callback in the driver's operation registration table is a related defense-in-depth gap, but it is not the control that prevents this attack.

  13. CVE-2026-63128 7.5 Élevée

    modelcontextprotocol rust-sdk

    RMCP is an official Rust SDK for the Model Context Protocol. Prior to 2.0.0, the rmcp crate's stateful Streamable HTTP server in crates/rmcp/src/transport/streamable_http_server/tower.rs allows an unauthenticated client to send a well-formed JSON-RPC POST that is not an initialization request, or an initialization request with a mismatched protocol header, causing StreamableHttpService::handle_post to call LocalSessionManager.create_session before validating the message. An early validation failure returns without removing the inserted LocalSessionHandle from LocalSessionManager.sessions, permanently retaining session and channel state for the server process lifetime. Repeated requests can grow the shared session table without bound, degrade legitimate-client latency through lock contention, exhaust memory, and terminate the server. This issue is fixed in version 2.0.0.

  14. CVE-2026-63127 8.2 Élevée

    modelcontextprotocol rust-sdk

    RMCP is an official Rust SDK for the Model Context Protocol. Prior to 2.0.0, the rmcp crate's OAuth implementation in crates/rmcp/src/transport/auth.rs omits the RFC 9728 resource field from ResourceServerMetadata and allows discover_oauth_server_via_resource_metadata to use protected-resource metadata without confirming that the returned resource identifier exactly matches the configured MCP server. A malicious MCP server can publish metadata for a different legitimate MCP resource and its authorization server, causing a victim who connects and completes the authorization flow to obtain a legitimate access token that the client subsequently sends to the malicious server. The attacker can capture the token and impersonate the victim against the legitimate MCP resource within the token's granted scopes. This issue is fixed in version 2.0.0.

  15. CVE-2026-92140 6.8 Moyenne

    Jenkins Project Jenkins Gitee Plugin

    Jenkins Gitee Plugin 1301.v8957053c7902 and earlier does not escape the sender name from Gitee push webhook payloads in build causes, resulting in a stored cross-site scripting (XSS) vulnerability exploitable by attackers able to trigger builds via the Jenkins Gitee Plugin webhook endpoint.

  16. CVE-2026-92133 5.4 Moyenne

    Jenkins Project Jenkins GitLab Plugin

    Jenkins GitLab Plugin 1.2149.vcfc32c82b_f7f and earlier caches the GitLab API client built for alternative GitLab API token credentials under a cache key derived from the credentials ID alone, omitting the folder in which the credentials are resolved, allowing attackers with Item/Configure permission to access GitLab API token credentials they are not entitled to use.

  17. CVE-2026-73175 7.1 Élevée

    Advantech EKI-1242IEIMS · Advantech EKI-1242EIMS

    Nozomi Networks Labs identified a CWE-400: Uncontrolled Resource Consumption vulnerability in the OPC UA gateway component of Advantech EKI-1242EIMS in firmware version V1.06.01 that allows an adjacent unauthenticated attacker to exhaust the server session pool and cause a complete denial of service to all legitimate OPC UA clients by opening multiple anonymous sessions.

  18. CVE-2026-90015 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: xhci: fix lost bounce buffers on TDs spanning several ring segments When a TD reaches a link TRB with data that is not aligned to the endpoint's wMaxPacketSize, xhci_align_td() stages the unalignable tail through the bounce buffer of the ring segment holding that link TRB. xhci_unmap_td_bounce_buffer() later unmaps it and, for IN transfers, copies the data back into the URB's buffer. The enqueue path records the segment that was bounced in td->bounce_seg, under the assumption that a TD never spans more than two ring segments. That assumption does not hold: a TD large enough to span three or more segments crosses several link TRBs and can be bounced at each of them. Only the last one survives in td->bounce_seg, so every earlier bounce buffer is neither copied back nor DMA unmapped. The URB still completes with actual_length equal to the requested length and no error, so the transfer looks successful while a wMaxPacketSize sized hole in the destination buffer silently keeps its previous contents. It also leaks a DMA mapping per dropped bounce. Any sufficiently large and fragmented bulk transfer can hit this. It was found with a USB mass storage device behind xHCI backing a dm-verity target with 512 byte hash blocks, where the stale data is detected rather than silently consumed. The device enumerates as SuperSpeed, so wMaxPacketSize is 1024, while dm-bufio issues one 512 byte bio per hash block. verity_prefetch_io() makes the block layer merge hundreds of them into a single request of up to 512 scatterlist entries of 512 bytes each. At 256 TRBs per ring segment such a TD spans three segments, and every segment boundary falls on an odd multiple of 512, i.e. unaligned to wMaxPacketSize. dm-bufio then caches a hash block holding stale data and dm-verity declares the metadata block corrupted: device-mapper: verity: 8:2: metadata block 10850 is corrupted A reproducer running this under qemu is available at https://github.com/baloo/xhci-verity The bounce state (bounce_buf, bounce_dma, bounce_len, bounce_offs) already lives on the ring segment, so there is nothing extra to track. Keep recording the last bounced segment in td->bounce_seg and, on completion, walk the segments from td->start_seg up to it, unmapping every segment that still has a pending bounce. Stopping at td->bounce_seg rather than td->end_seg matters: a bounce implies the TD continues past that segment's link TRB, so bounce_seg is always strictly before end_seg, and a later TD may already have started in end_seg and been bounced there. Walking that far would copy a foreign bounce buffer into this URB and unmap it twice. It also keeps the walk correct if a TD ever wraps the whole ring so that end_seg == start_seg. [mn: Add ring->num_segs check to prevent unlikely infinite for loop.]

  19. CVE-2026-90001 7.8 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: HID: bpf: serialize device reference release in struct_ops destroy path __hid_bpf_ops_destroy_device() and hid_bpf_unreg() can race on the same registration reference, double-putting struct hid_device and freeing it while hid_destroy_device() still uses it. Serialize the remove/NULL decision under hdev->bpf.prog_list_lock so exactly one path releases each registration reference: unreg re-checks ops->hdev under the lock and returns without putting when the destroy path already cleared it; all put_device() calls happen after the lock is dropped, which is safe because a concurrent unreg then observes ops->hdev == NULL under the lock. Background: each successful attach (hid_bpf_ops_reg) acquires one device reference (hid_get_device()). Two paths can release it: - device destruction: hid_destroy_device() -> hid_bpf_destroy_device() -> __hid_bpf_ops_destroy_device(), which walks hdev->bpf.prog_list under rcu_read_lock() and drops one reference per attached program; - BPF link release: bpf map delete (no BPF_F_LINK) synchronously calls st_ops->unreg() -> hid_bpf_unreg(), which drops the reference for its own registration. The coordination handshake (e->hdev = NULL on the destroy side vs "if (!hdev) return" on the unreg side) is a TOCTOU check: the two paths run under different lock domains (rcu_read_lock vs prog_list_lock), so a concurrent unreg can read ops->hdev as non-NULL, block on prog_list_lock, and then proceed while the destroy traversal executes - both paths then drop the same reference. The refcount reaches zero legitimately (each decrement is individually valid), so no refcount_t saturation fires: the device is simply freed while the transport is still inside hid_destroy_device(), and subsequent teardown touches freed memory. The fix serializes the remove/NULL decision under prog_list_lock on both sides and moves the destroy-side puts outside the lock. With the lock held, plain reads/writes of ops->hdev are sufficient; no READ_ONCE/WRITE_ONCE are added, keeping the patch minimal. Unlocked-read safety: the unlocked read of ops->hdev at the top of hid_bpf_unreg() cannot touch a freed device, because the unreg path itself still holds this registration's reference (released only by its own hid_put_device() after the lock is dropped), and a destroy traversal that already cleared ops->hdev makes the lock-internal re-check return early without any put. At most one of the two paths releases each registration reference.

  20. CVE-2026-89960 8.8 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: fix stale pqap_hook pointer on error in vfio_ap_mdev_set_kvm() In vfio_ap_mdev_set_kvm(), kvm->arch.crypto.pqap_hook is set to &matrix_mdev->pqap_hook before the update locks are acquired and the mdev list is checked for a conflicting assignment. If another mdev is already attached to the same KVM instance, the function returns -EPERM without restoring the hook pointer, leaving kvm->arch.crypto.pqap_hook pointing at the failing matrix_mdev instead of the mdev that legitimately owns the KVM. Since matrix_mdev->kvm is never set on this error path, vfio_ap_mdev_unset_kvm() will not clean up the hook when matrix_mdev is later closed. If matrix_mdev is subsequently freed, any PQAP instruction executed by the guest will dereference the stale pointer through pqap_hook_rwsem, resulting in a use-after-free. Since kvm->arch.crypto.pqap_hook is only set in the vfio_ap_mdev_set_kvm() function and is cleared in the vfio_ap_mdev_unset_kvm() function, a check for 'kvm->arch.crypto.pqap_hook != NULL' is all that is needed to determine whether it belongs to another mdev. This will alleviate the need to iterate the matrix_dev->mdev_list list to see if the kvm object is assigned to another mdev.This was introduced in v3 to alleviate the need to take the mdevs_lock while iterating the list; however, this did not prevent a potential race condition. The pqap_hook_rwsem(write) is now performed inside get_update_locks_for_kvm(), which is updated to acquire pqap_hook_rwsem(write) between kvm->lock and mdevs_lock. This ordering is consistent with the PQAP intercept path, which acquires pqap_hook_rwsem in read mode while srcu is held under vcpu->mutex, establishing the dependency: kvm->lock -> vcpu->mutex -> srcu -> pqap_hook_rwsem(read). The pqap_hook_rwsem is now released inside the release_update_locks_for_kvm(), which is updated to release pqap_hook_rwsem(write) between mdevs_lock and kvm->lock. Additionally, kvm_put_kvm() in vfio_ap_mdev_unset_kvm() is moved after release_update_locks_for_kvm(). Previously it was called while kvm->lock was held; if it were ever the last reference, kvm_destroy_vm() would run under kvm->lock, which would deadlock.

  21. CVE-2026-89903 7.8 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: LoongArch: Do not save/restore percpu base register in rethook trampoline The rethook trampoline saves $r21 ($u0), the percpu base, into its frame at entry and restores it at exit. Inbetween rethook_trampoline_handler() may schedule via preempt_enable_notrace(). If the task migrates to another CPU, the frame's $r21 holds the old CPU's percpu base, and restoring it poisons $r21 on the new CPU. Until the next user->kernel transition heals $r21, all this_cpu_*() accesses (runqueues, RCU per-CPU data, timer tick programming, FPU ownership) hit the wrong CPU's percpu area. Under kretprobe-heavy preemptible load this can corrupt scheduler and timer state: scheduling-while-atomic splats, wrong-CPU RCU warnings, WARN_ON_ONCE(rq != this_rq()) in nohz_balance_exit_idle(), and CPUs parking in the idle loop with the constant timer never re-armed (hard lockup). Reproduces on a Loongson-3A6000 with kretprobes on VFS paths plus heavy file churn (OS install / unsquashfs). By convention $r21 always holds the current CPU's percpu base in kernel mode: SAVE_SOME() at exception entry reloads it only when coming from user mode, and RESTORE_SOME() restores it only when returning to user mode; the context-switch path never writes it. Therefore the live $r21 at trampoline exit is already correct, and nothing inbetween can change it legitimately (kernel C code cannot write a global register variable). The same flaw existed even in the pre-rethook kretprobe trampoline since v6.3; it was carried over when rethook replaced it. Drop both the save and the restore here. Drop the restore is enough to solve the issue, and drop the save is to keep the code tidy and no need to clear it.

  22. CVE-2026-89826 7.1 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: drm/panthor: harden firmware build-info bounds checks panthor_fw_read_build_info() checks whether the metadata range fits in the firmware image with hdr.meta_start + hdr.meta_size. Both fields are u32, so the addition can wrap and let an out-of-bounds range pass validation. The function also reads the "git_sha: " prefix without first checking that the metadata is long enough, and meta_size == 0 can underflow the NULL terminator index. Use subtraction-based bounds checking and reject metadata that is too short to contain the expected prefix and trailing NULL byte.

  23. CVE-2026-89807 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: guard against NULL restore_mqd in CRIU queue restore Both create_queue_cpsch() and create_queue_nocpsch() unconditionally call mqd_mgr->restore_mqd() when a CRIU restore is in progress (qd != NULL), with no NULL guard. On any system where restore_mqd is not implemented for the given queue type, a user holding CAP_CHECKPOINT_RESTORE can trigger a kernel NULL pointer dereference and panic the machine by issuing KFD_IOC_CRIU_OP_RESTORE with a crafted queue restore object. Note that checkpoint_mqd is likewise unimplemented on GFX12, so no legitimate CRIU image can reach this path — only a hand-crafted restore payload. Add a NULL guard for restore_mqd immediately after mqd_mgr is resolved, unwinding via the existing error labels and returning -EOPNOTSUPP if the callback is not implemented. This mirrors the existing checkpoint_mqd guard in checkpoint_mqd().

  24. CVE-2026-84439 5.3 Moyenne

    Apache Software Foundation Apache ZooKeeper · Apache zookeeper

    When audit logging is enabled (zookeeper.audit.enable=true), an unauthenticated attacker can inject arbitrary fields into Apache ZooKeeper's audit log by sending a digest authentication request with tab characters (\t) embedded in the username. Because the audit log uses tab-separated key=value format, the injected tabs are parsed as legitimate field separators, allowing the attacker to spoof audit results (e.g., injecting result=success), forge operation types, and corrupt forensic evidence. A log injection vulnerability in Apache ZooKeeper allows a client that can call setACL to inject forged key-value fields into zookeeper_audit.log. When audit logging is enabled, the server serializes attacker-controlled digest ACL ids into the acl= audit field without escaping tab characters. Because audit events are emitted as tab-separated key=value records, a crafted ACL id can make one successful setAcl event appear to contain forged fields such as operation=delete and znode=/forged. This undermines the integrity of downstream audit parsing, alerting, and incident response. This issue affects Apache ZooKeeper: from 3.9.0 through 3.9.5, from 3.8.0 through 3.8.6. Users are recommended to upgrade to version 3.9.6 or 3.8.7, which fixes the issue.

  25. CVE-2026-82310 7.2 Élevée

    Apache Software Foundation Apache Airflow FAB provider · Apache apache-airflow-providers-fab

    Apache Airflow FAB provider: deactivating a user account does not stop tokens issued to that account before deactivation. Password authentication correctly rejects the disabled account, but the Core API continues to accept an existing, unexpired token naming it, and lets that token mint a replacement — so the account keeps its role-scoped access indefinitely after an administrator has disabled it. The user replays their own legitimate credential; no signature forgery or privilege escalation is involved, and the access stays within the roles the account already held. Affects deployments using Airflow 3 with the FAB auth manager and Core API token authentication, where an administrator deactivates an account whose row remains in the database and whose previously issued token has not expired. The trigger is administrative deactivation as a containment action, which silently fails to contain. Users of apache-airflow-providers-fab are recommended to upgrade to version 3.9.0 or later, which rejects tokens naming a deactivated account.

  26. CVE-2026-86341 4.4 Moyenne

    GitLab · Gitlab gitlab

    GitLab has remediated an issue in GitLab EE affecting all versions from 17.1 before 19.1.8, 19.2 before 19.2.6, and 19.3 before 19.3.2 that, under certain conditions, an authenticated user with Owner or Maintainer permissions could have silently disabled protected environment deployment approval requirements, allowing unapproved deployments to reach production, due to improper access control checks performed after the protected resource was modified.

  27. CVE-2026-8030 4.3 Moyenne

    GitLab · Gitlab gitlab

    GitLab has remediated an issue in GitLab CE/EE affecting all versions from 13.0 before 19.1.8, 19.2 before 19.2.6, and 19.3 before 19.3.2 that under certain conditions could have allowed an authenticated user to prevent another user from modifying their group settings due to improper validation of group URL slugs during namespace transfers.

  28. CVE-2026-79708 8.5 Élevée

    GitLab · Gitlab gitlab

    GitLab has remediated an issue in GitLab EE affecting all versions from 19.0 before 19.1.8, 19.2 before 19.2.6, and 19.3 before 19.3.2 that, under certain conditions could have allowed an authenticated user with developer permissions to execute a policy test pipeline on projects within their group and access protected CI/CD variables restricted to higher-privileged roles, due to insufficient scope validation.

  29. CVE-2026-78252 6.1 Moyenne

    GitLab · Gitlab gitlab

    GitLab has remediated an issue in GitLab CE/EE affecting all versions from 15.3 before 19.1.8, 19.2 before 19.2.6, and 19.3 before 19.3.2 that, under certain conditions, an authenticated user could have induced a targeted user to perform unintended state-changing HTTP requests due to improper sanitization of user-controlled data in the Markdown JSON table renderer.

  30. CVE-2026-7514 4.3 Moyenne

    GitLab · Gitlab gitlab

    GitLab has remediated an issue in GitLab CE/EE affecting all versions from 13.9 before 19.1.8, 19.2 before 19.2.6, and 19.3 before 19.3.2 that an authenticated user with developer-role permissions could substitute package file content and hide packages from their owners due to improper authorization checks in the Generic Package Registry.

  31. CVE-2026-3855 6.8 Moyenne

    GitLab · Gitlab gitlab

    GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.2.7 before 19.1.8, 19.2 before 19.2.6, and 19.3 before 19.3.2 that under certain conditions could have allowed an authenticated user with project-level permissions to access restricted file contents on the server or cause denial of service due to improper validation of parameters in the Terraform state upload functionality.

  32. CVE-2026-19619 4.7 Moyenne

    GitLab · Gitlab gitlab

    GitLab has remediated an issue in GitLab CE/EE affecting all versions from 19.0 before 19.1.8, 19.2 before 19.2.6, and 19.3 before 19.3.2 that under certain conditions could have allowed an unauthenticated user to execute arbitrary JavaScript in the context of a targeted user's session due to improper sanitization of pasted HTML content in the Content Editor.

  33. CVE-2026-1168 7.5 Élevée

    GitLab · Gitlab gitlab

    GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.4.6 before 19.1.8, 19.2 before 19.2.6, and 19.3 before 19.3.2 that under certain conditions could have allowed an unauthenticated user to cause denial of service due to improper resource allocation limits in the GraphQL complexity calculation logic.

  34. CVE-2026-16794 4.3 Moyenne

    GitLab · Gitlab gitlab

    GitLab has remediated an issue in GitLab EE affecting all versions from 18.11 before 19.1.8, 19.2 before 19.2.6, and 19.3 before 19.3.2 that under certain conditions could have allowed an authenticated user with the Security Manager role to execute arbitrary CI/CD jobs and access protected variables within group projects due to improper authorization controls on compliance framework management.

  35. CVE-2025-14871 7.5 Élevée

    GitLab · Gitlab gitlab

    GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.4.6 before 19.1.8, 19.2 before 19.2.6, and 19.3 before 19.3.2 that under certain conditions could have allowed an unauthenticated user to cause denial of service due to improper resource allocation limits in the GraphQL complexity calculation logic.

  36. CVE-2024-11222 6.4 Moyenne

    GitLab · Gitlab gitlab

    GitLab has remediated an issue in GitLab CE/EE affecting all versions from 13.0 before 19.1.8, 19.2 before 19.2.6, and 19.3 before 19.3.2 that under certain conditions could have allowed a developer user to perform actions in the context of another user's merge request commit due to a race condition issue in pipeline creation.

  37. CVE-2026-73459 7.4 Élevée

    Arista Networks EOS

    On affected platforms running Arista EOS with IS-IS configured, an unauthenticated attacker who can inject a specially crafted IS-IS LSP PDU can cause the legitimate LSP to be unexpectedly purged from the IS-IS link-state database. This may result in traffic loss.

  38. CVE-2026-15639 9.3 Critique

    Delinea Secret Server (On-Prem)

    An attacker can craft a malicious link that, if used by a legitimate user, may cause the user's browser to run JavaScript supplied by the attacker.

  39. CVE-2026-61560 9.8 Critique

    zereight gitlab-mcp

    `@zereight/mcp-gitlab` is a Model Context Protocol server for GitLab. Prior to version 2.1.27, the SSE transport mode (`SSE=true`) exposes all MCP tools without any authentication. The `upload_markdown` tool reads arbitrary files from the server's local filesystem via an unsanitized `file_path` parameter and uploads them to a GitLab project. Combined, any unauthenticated network-reachable attacker can read `/proc/self/environ` to steal the server's `GITLAB_PERSONAL_ACCESS_TOKEN` and achieve full GitLab account takeover. This is the default configuration for Docker deployments. Version 2.1.27 contains a patch.