Semaine du 7 septembre au 13 septembre 2026

Linux

In the Linux kernel, the following vulnerability has been resolved: ubifs: fix out-of-bounds read in signature length check ubifs_sb_verify_signature() bounds the on-disk ubifs_sig_node->len field before handing the signature payload to verify_pkcs7_signature(), but the check has the wrong sign: if (le32_to_cpu(signode->len) > snod->len + sizeof(struct ubifs_sig_node)) The signature bytes start sizeof(struct ubifs_sig_node) (UBIFS_SIG_NODE_SZ, 64 bytes) into the node, so the payload is at most snod->len - sizeof(struct ubifs_sig_node) bytes long. Adding the header size instead of subtracting it accepts a declared length up to 2 * UBIFS_SIG_NODE_SZ larger than the node actually holds -- past the end of c->sbuf, which is vmalloc(c->leb_size). verify_pkcs7_signature() -> pkcs7_parse_message() -> asn1_ber_decoder() is then handed that inflated length and reads beyond the allocation while walking the DER headers. The node length comes straight from the mounted image, so a crafted signed UBIFS image reaches this via ubifs_read_superblock() before the signature is cryptographically checked. snod->len is guaranteed to be >= UBIFS_SIG_NODE_SZ by the node scanner (c->ranges[UBIFS_SIG_NODE].min_len == UBIFS_SIG_NODE_SZ), so the corrected subtraction cannot underflow. Legitimately signed images are unaffected: a correct superblock never declares a signature longer than the node it is embedded in.

Linux

In the Linux kernel, the following vulnerability has been resolved: ceph: cap delegated inode count in ceph_parse_deleg_inos() ceph_parse_deleg_inos() decodes interval sets of delegated inode numbers from an MDS create-with-delegation reply. For each set it reads a 64-bit start and a 64-bit len with ceph_decode_64_safe(), which only validates that the eight bytes are present in the message, not the value, and then loops over len while inserting entries into s_delegated_inos. len is fully attacker controlled. A malicious or compromised MDS can send one huge interval, many intervals in one reply, duplicate intervals, or repeated replies that accumulate delegated inodes on the same session. The original code bounded none of these and could spin the insert loop or grow the xarray without limit. Bound both dimensions with a single enforcement point. Track the number of delegated inodes held by each MDS session in an atomic counter and grow it only in ceph_insert_deleg_ino(), which uses atomic_add_unless() to refuse to push the count past CEPH_MAX_DELEG_INOS. Because that helper is the only place the counter grows, the per-session population can never exceed the cap, so no separate per-session pre-check is needed. The counter is decremented when async create consumes a delegated inode or when an insert fails, incremented when a delegated inode is restored, initialized with the session xarray, and reset when reconnect destroys the xarray. A per-session cap alone still lets one reply spin the insert loop on duplicate ranges without growing the counter, so also cap the aggregate interval length accepted from a single reply. Together these bound both the loop trip count per reply and the xarray population across replies. The cap is a fixed, client-chosen constant rather than a value derived from the MDS. mds_client_prealloc_inos is a userspace MDS configuration option; it is never sent to the kernel client on the wire, and a server-supplied bound could not be trusted for a defensive limit in any case. The constant is set well above that option's documented default of 1000 (a generous multiple), so legitimate refill behavior is unaffected while the CPU and xarray memory a malformed delegation stream can consume stays bounded. Impact: a malicious or compromised Ceph MDS can no longer make a client spin through an unbounded delegated-inode interval or grow one session's delegated-inode xarray without limit.

Apache Software Foundation Apache OpenNLP · Apache opennlp

OOM Denial of Service via Unbounded Map Pre-Sizing in Apache OpenNLP SymSpellModelSerializer Versions Affected: - 3.0.0-M4 - 3.0.0-M5 (The opennlp-spellcheck extension was introduced in 3.0.0-M4. Releases 1.x and 2.x do not contain the affected code.) Description: The SymSpellModelSerializer.create() method reads two 32-bit signed integer count fields (unigramCount and bigramCount) from a binary SymSpell model stream and passes each value directly to LinkedHashMap.newLinkedHashMap() after validating only that it is non-negative. No upper bound is applied, so the count is fully attacker-controlled when the model file originates from an untrusted source. A crafted .bin model file in which either count field is set to Integer.MAX_VALUE (or any value large enough to exhaust the available heap) causes the map to be pre-sized to a capacity of 2^30 entries. The oversized backing array is allocated on the first put() into that map, requesting 4–8 GB depending on whether compressed oops are in effect, and the load fails with an OutOfMemoryError. Because the count fields sit immediately after a fixed-size header (magic, format version, three UTF strings, the configuration fields, and the edit-distance identifier) the attacker pays no meaningful size cost to weaponize a payload: a file of well under 100 bytes plus a single real entry is sufficient to crash a JVM that loads it. Any code path that deserializes a SymSpell model is affected, including SymSpellModels.deserialize(InputStream), SymSpellModels.fromBytes(byte[]), classpath model loading via SymSpellModelResolver.resolveByLanguage(String), the CorrectTextTool command-line tool, and model-archive loading through the registered ArtifactSerializer. The opennlp-spellcheck extension ships in the official OpenNLP binary distribution. The practical impact is denial of service against processes that load SymSpell model files from untrusted or semi-trusted origins. Mitigation: - 3.x users should upgrade to 3.0.0-M6. Note: The fix applies an upper bound to both count fields, checked before the map is pre-sized; counts that are negative or exceed the bound cause an IOException to be thrown and the read to fail fast with no large allocation. The bound is the existing AbstractModelReader.MAX_ENTRIES limit introduced earlie, which the current change promotes to public visibility so that serializers implementing their own binary format can share it. The default bound is 10,000,000, which is well above the entry counts of legitimate SymSpell dictionaries but far below any value that would threaten heap exhaustion. Deployments that legitimately need to load larger dictionaries can raise the limit at JVM startup by setting the OPENNLP_MAX_ENTRIES system property to the desired positive integer (e.g. -DOPENNLP_MAX_ENTRIES=50000000); invalid or non-positive values fall back to the default. Note that this property is shared with the model-reader limit and raising it relaxes both. Users who cannot upgrade immediately should treat all SymSpell .bin model files as untrusted input unless their provenance is verified, and should avoid loading models supplied by end users or fetched from third-party repositories without integrity checks.

FasterXML jackson-databind

jackson-databind binds a JSON string to a javax.xml.datatype.Duration or javax.xml.datatype.XMLGregorianCalendar field by passing the raw string verbatim to DatatypeFactory.newDuration(value) or newXMLGregorianCalendar(value) in CoreXMLDeserializers.Std._deserialize. These deserializers are registered by default with no opt-in, so a plain ObjectMapper or JsonMapper with no polymorphic typing and no special configuration reaches this path. The XML Schema lexical grammar permits numeric components of arbitrary length, which the JDK materializes through the native BigInteger(String) and BigDecimal(String) constructors, both quadratic in digit count. Because the digits sit inside a JSON string token rather than a JSON number token, jackson-core's StreamReadConstraints.maxNumberLength guard never applies; jackson's own NumberDeserializers call validateIntegerLength or validateFPLength before parsing a stringified number, but the XML datatype deserializer omits that pre-check. An unauthenticated attacker can therefore submit a single request of a few megabytes, such as a Duration value consisting of the letter P followed by several million digits and the letter Y, and force tens of seconds to several minutes of single-threaded CPU work; a handful of concurrent requests can saturate a server's worker threads. This affects com.fasterxml.jackson.core:jackson-databind from 2.0.0 before 2.18.10, from 2.19.0 before 2.21.6, and from 2.22.0 before 2.22.2, and tools.jackson.core:jackson-databind from 3.0.0 before 3.1.6 and from 3.2.0 before 3.2.2. Users should upgrade to 2.18.10, 2.21.6, 2.22.2, 3.1.6, or 3.2.2.

isomorphic-git

isomorphic-git before 1.42.0 contains a prototype pollution vulnerability in the getRemoteInfo function that allows a malicious Git server operator to pollute Object.prototype by advertising crafted ref names containing '__proto__' path segments during ref negotiation. Attackers controlling a Git server can advertise a specially crafted ref such as '__proto__/corsProxy' to reroute all subsequent network operations through an attacker-controlled proxy, causing isomorphic-git to invoke the victim's onAuth callback and transmit credentials to the attacker when the victim calls getRemoteInfo with an attacker-supplied URL.

renovatebot renovate · mend renovate-ce · mend renovate-ee-server · mend renovate-ee-worker

Renovate, a dependency update tool, follows pagination links supplied by the GitHub server in the HTTP `Link` header when interacting with GitHub.com, GitHub Enterprise Cloud, or GitHub Enterprise Server, and sends the credentials configured for that host to the URL given as the 'next' page. Because the pagination URL is not validated against the host originally contacted, a malicious or compromised GitHub server can return a `Link` header pointing to an attacker-controlled host and cause Renovate to disclose those credentials to it. Exploitation requires that the GitHub server Renovate talks to (as the repository host or as a datasource such as github-releases, github-tags, or git-refs) is already malicious or compromised. The issue is fixed in renovate 44.11.3 (npm and renovate/renovate container images), Mend Renovate CE/EE images and the mend-renovate-ce helm chart 15.4.0, and the mend-renovate-enterprise-edition helm chart 10.4.0. There is no workaround; the pre-existing RENOVATE_X_REBASE_PAGINATION_LINKS option disables the new host check and should only be used with servers that intentionally use different pagination hosts.

renovatebot renovate · mend renovate-ce · mend renovate-ee-server · mend renovate-ee-worker

Renovate before 44.11.3 fails to validate Link header destinations when following GitLab server pagination, allowing malicious servers to redirect credential-bearing requests. Attackers controlling a compromised GitLab server can specify a Link header pointing to attacker-controlled infrastructure to exfiltrate authentication credentials.

Unknown Registration Form for WooCommerce

The Registration Form for WooCommerce WordPress plugin before 1.1.3 does not validate that the form referenced during registration is a legitimate registration form, reading the permitted-role allow-list from an arbitrary attacker-controlled post instead. A user able to create a post (Contributor and above) can therefore register a new account with an arbitrary role, including Administrator, leading to full site takeover. This is an incomplete fix of CVE-2026-54807.

gitpython-developers GitPython · Gitpython project gitpython

GitPython before 3.1.60 contains a regular expression denial of service vulnerability in Actor.name_email_regex that processes commit author and committer fields. Attackers can craft a commit object with a malformed author field containing an unterminated angle bracket to cause quadratic backtracking, exhausting CPU resources for over two minutes per commit access.

gitpython-developers GitPython · Gitpython project gitpython

GitPython before 3.1.60 fails to properly validate the git directory location, allowing attackers to impersonate the git directory using tracked files like gitdir, commondir, and HEAD. Attackers can execute arbitrary code by placing a malicious pre-commit hook in the tracked hooks directory that executes when a victim calls index.commit() on a cloned or opened repository.

macropay-solutions maravel-framework

Maravel, a PHP framework oriented towards dependency injection, prior to version 10.74.0 has a high-severity Token Replay Vulnerability arising from a structural lifecycle mismatch between stateless token validation engines and high-performance relational caching layers. Any application with low cache memory that causes premature eviction to free up memory and applications running macropay-solutions/maravel-framework that utilize tymon/jwt-auth for API token authentication and blacklist management or any other package that does the same may be affected. This architectural risk might also impact native Laravel applications utilizing cache tags under specific volatile or eviction-capped environments. tymon/jwt-auth automatically probes for cache tag support. If found, it forcefully wraps 14-day token blacklist entries (jti) inside a relational tymon.jwt tag. In environments where the O(1) Atomic Lazy Eviction model is active — either natively inside Maravel-Framework v20.x or manually backported into v10.x via the explicit DI container singletons provided in PR #104 (App\Cache\TaggedCache and App\Cache\TagSet) — a strict global tracking ceiling (Container::TAGGED_CACHE_TTL_CAP_SECONDS) of 7,200 seconds (2 hours) is enforced to secure the system against memory index bloat. This ceiling forcefully truncates the 14-day blacklist lifespan down to a maximum of 2 hours, after which individual tracking keys naturally expire and disappear from the active cache window. Furthermore, because the optimized engine implements a generational version matrix to achieve O(1) flush speeds, any programmatic or manual invocation of a tag flush or reset (e.g., Cache::tags([...])->flush()) instantly bumps the internal atomic master version pointer. This shifts the computed cryptographic composite hash (sha1($this->tags->getNamespace())) for all overlapping components, rendering the entire existing index immediately unreachable. Consequently, through either natural 2-hour expiration or an intervening tag flush execution (like the cache naturally cleaning old values to free up memory), the invalidation state records are entirely wiped out. Because the tokens' physical cryptographic signatures remain structurally valid for up to 14 days, stolen, hijacked, or legitimately logged-out tokens are instantly and silently resurrected across the entire API gateway, leaving the application critically vulnerable to widespread Token Replay Attacks. Because this issue is caused by an upstream architectural assumption within the tymon/jwt-auth package rather than a core defect inside the framework, there is no direct framework version upgrade that can safely bypass this lifecycle collision without breaking business cache recycling bounds. Maravel version 10.74.0 introduced a way to backport the new fixed tagged cache from 20.x into 10.x by resolving TagSet and TaggedCache from DI, which is how this latent architectural lifecycle vulnerability was discovered. Users must apply the decoupled configuration workaround outlined below. As a workaround, make sure that cache memory size does not generate early natural evictions from cache to free up space, deleting blacklisted jwt ids before they expire. Applications must decouple flat authentication vectors from the relational tagging subsystem. This forces token identifiers to write directly to the primary cache keyspace as flat, un-tagged key-value pairs where they securely retain their unclipped 14-day lifecycle.

n8n-io n8n

n8n is an open source workflow automation platform. Prior to 1.123.76, 2.37.7, and 2.38.2, the Git node clone operation matched an attacker-controlled destination path against the default N8N_BLOCK_FILE_PATTERNS regular expression. The pattern ^(./).git(/.)$ allowed catastrophic backtracking and ran synchronously in the main n8n process. An authenticated workflow editor could therefore freeze the instance with one workflow execution; the affected default is declared in packages/@n8n/config/src/configs/security.config.ts. This issue is fixed in versions 1.123.76, 2.37.7 and 2.38.2.

Microsoft Visual Studio Code

Insufficiently protected credentials in GitHub Copilot and Visual Studio Code allows an unauthorized attacker to disclose information over a network.

MongoDB Server · Mongodb mongodb

An uncontrolled resource consumption weakness exists in the request-handling path of the MongoDB sharded-cluster router process. A client that has network access to a router port and has not authenticated can supply connection-monitoring parameters that cause the server to expend CPU resources without any rate limiting, degrading or denying service to legitimate clients. No authentication, elevated privileges, or user interaction is required. Only availability is affected; data confidentiality and integrity are not impacted.

PixelYourSite EDD Product Catalog Feed by PixelYourSite

The EDD Product Catalog Feed by PixelYourSite plugin for WordPress is vulnerable to unauthorized modification of data that can lead to a denial of service due to a missing capability check on the wpeddpcf_delete_feed function in all versions up to, and including, 1.0.2. This makes it possible for authenticated attackers, with subscriber-level access and above, to delete arbitrary option values on the WordPress site. This can be leveraged to delete an option that would create an error on the site and deny service to legitimate users.

Siemens Reyrolle 7SR5

A vulnerability has been identified in Reyrolle 7SR5 (All versions < V2.70). A random number generator is used to generate security-relevant values (such as session identifiers used for authentication purposes) that is not initialized with a True Random Number Generator (TRNG), resulting in a predictable sequence of generated values. This could allow an unauthenticated remote attacker to more easily predict the generated values and impersonate a legitimate authenticated user, potentially gaining unauthorized access to the device.

JetBrains YouTrack

In JetBrains YouTrack before 2026.2.18634 a shared token cache allowed cross-tenant theft of GitHub App installation tokens

thephpleague commonmark

league/commonmark versions before 2.9.1 contain multiple denial of service vulnerabilities in fenced code block detection, reference link label lookup, and emphasis delimiter processing that perform super-linear work on crafted input. Attackers can submit specially crafted Markdown with long backtick runs, nested brackets, or delimiter sequences to consume disproportionate CPU time and prevent legitimate requests from completing.

thephpleague commonmark

The league/commonmark (thephpleague/commonmark) library in versions >= 1.5.0 and < 2.9.1 contains quadratic parsing complexity in its SmartPunctExtension and AttributesExtension. When either extension is explicitly registered on the Environment (they are not enabled by default and are excluded from the standard CommonMark and GitHub-Flavored Markdown converters), an unauthenticated attacker can submit small, specially crafted Markdown documents — such as text alternating with unpaired quotes, contiguous runs of block-level attribute blocks, or repeated class attributes — to trigger disproportionate CPU consumption and cause a denial of service. Fixed in 2.9.1.

thephpleague commonmark

commonmark versions from 1.5.0 before 2.10.0 contain a denial of service vulnerability in the AttributesExtension when processing distinctly-named attributes. Attackers can submit Markdown with numerous distinct attribute names to cause quadratic-time attribute merging and filtering, consuming disproportionate CPU resources and preventing legitimate requests from completing.