Vendredi 11 septembre 2026

Linux

In the Linux kernel, the following vulnerability has been resolved: NFSD: check truncate permission under inode lock nfsd_setattr() checks whether a size update needs NFSD_MAY_TRUNC before it takes inode_lock(). The comparison uses the file size sampled by that unlocked read, but the actual ATTR_SIZE update is applied later under inode_lock() by notify_change(). This leaves a TOCTOU window for append-only files. If a client sends a SETATTR that does not shrink the file at the time of the unlocked sample, a concurrent append can extend the file before nfsd_setattr() takes inode_lock(). notify_change() then applies a real truncation without the NFSD_MAY_TRUNC check that rejects IS_APPEND(inode). The VFS truncate syscall paths perform their own append-only checks before calling notify_change(), so NFSD must make this decision against the locked size it is about to change. Split the write-count acquisition from the truncation permission check. Keep get_write_access() before the locked setattr work, then recheck whether the requested size is below i_size_read(inode) after inode_lock() has been acquired and before notify_change(ATTR_SIZE). This also avoids the plain unlocked inode->i_size load.

Linux

In the Linux kernel, the following vulnerability has been resolved: nfsd: RCU-protect cl_cb_session to fix use-after-free on session teardown After a DESTROY_SESSION the per-session teardown path can free a session while rpciod still holds an inflight callback rpc_task that dereferences clp->cl_cb_session. nfsd4_probe_callback_sync() flushes cl_callback_wq, but once nfsd4_run_cb_work() has called rpc_call_async() the rpc_task lives on rpciod; flushing the workqueue does not wait for it. rpc_shutdown_client() does drain rpciod tasks, but uses a 1-second wait_event_timeout — tasks stuck in rpc_delay() (e.g. 2-second NFS4ERR_DELAY retries) can outlive the drain. destroy path rpciod ------------ ------ unhash_session(ses) nfsd4_probe_callback_sync(clp) flush_workqueue(cl_callback_wq) /* returns; rpc_task still live */ nfsd4_put_session_locked(ses) free_session(ses) -> kfree(ses) nfsd4_cb_sequence_done() reads cb_clp->cl_cb_session /* freed slab */ A second window exists in nfsd4_process_cb_update(). When __nfsd4_find_backchannel() returns NULL because unhash_session() has already removed the destroyed session from cl_sessions, setup_callback_client() takes the v4.1 early return so clp->cl_cb_session = ses never fires and the field retains a pointer to the about-to-be-freed session. Fix both by converting cl_cb_session to an RCU-protected pointer: - Move the cl_cb_session = ses assignment in setup_callback_client() to after rpc_create() succeeds, so it is only published when a working backchannel exists. Clear cl_cb_session on the error return in nfsd4_process_cb_update(). Both stores use rcu_assign_pointer(). - Annotate cl_cb_session with __rcu. All rpciod-side readers use rcu_read_lock()/rcu_dereference() and check for NULL, bailing to the appropriate error or requeue path: encode_cb_sequence4args(), decode_cb_sequence4resok(), nfsd41_cb_get_slot(), nfsd41_cb_release_slot(), nfsd4_cb_prepare(), and nfsd4_cb_sequence_done(). - Switch __free_session() from kfree() to kfree_rcu() so the session slab is not reclaimed until after an RCU grace period, guaranteeing that rpciod readers inside rcu_read_lock() never dereference freed memory. - Pass the session pointer to the nfsd_cb_seq_status and nfsd_cb_free_slot tracepoints instead of having them re-read cl_cb_session. - nfsd4_cb_prepare() calls rpc_exit() when the session is NULL, routing through the done/release path to requeue the callback.

Linux

In the Linux kernel, the following vulnerability has been resolved: nfsd: set SC_STATUS_FREED in nfsd4_drop_revoked_stid for delegations nfsd4_drop_revoked_stid() handles FREE_STATEID for admin-revoked delegations but does not set SC_STATUS_FREED before releasing cl_lock. revoke_delegation() uses this flag to detect whether FREE_STATEID has already processed the delegation -- without it, the freed delegation is added to cl_revoked via list_add(), producing a use-after-free when cl_revoked is later traversed in __destroy_client(). The SC_STATUS_REVOKED path in nfsd4_free_stateid() (line 7983) already sets SC_STATUS_FREED correctly. Apply the same pattern to the SC_STATUS_ADMIN_REVOKED path in nfsd4_drop_revoked_stid().

Linux

In the Linux kernel, the following vulnerability has been resolved: nfsd: size fh_verify server sockaddr slot by xpt_locallen The nfsd_fh_verify and nfsd_fh_verify_err tracepoints declare the server sockaddr slot sized by xpt_remotelen but fill it from xpt_local using xpt_locallen: TP_STRUCT__entry( ... __sockaddr(server, rqstp->rq_xprt->xpt_remotelen) ... ) TP_fast_assign( ... __assign_sockaddr(server, &rqstp->rq_xprt->xpt_local, rqstp->rq_xprt->xpt_locallen); ... ) When xpt_locallen exceeds xpt_remotelen, __assign_sockaddr's memcpy writes past the reserved ring-buffer slot. In the reverse direction (xpt_locallen < xpt_remotelen) the slot is oversized and the unwritten tail leaks prior ring-buffer contents to trace consumers. The write-past-end case is reachable on NFS/UDP. svc_xprt_set_remote() is only called from svc_tcp_accept() (net/sunrpc/svcsock.c) and from the RDMA connect path; svc_create_socket() for UDP calls only svc_xprt_set_local(), so xpt_remotelen stays 0 for the xprt's lifetime. Every fh_verify trace for an NFSv2/v3-over-UDP request then copies 16 or 28 bytes from xpt_local into a zero-byte slot. The other NFSD tracepoints that record the server address (NFSD_TRACE_PROC_CALL_FIELDS, NFSD_TRACE_PROC_RES_FIELDS, SVC_RQST_ENDPOINT_FIELDS) already size the server slot by xpt_locallen; nfsd_fh_verify and nfsd_fh_verify_err were the only exceptions. Fix by sizing the server slot with xpt_locallen so the declared slot matches the copy length. The client slot and its assignment already agree on xpt_remotelen and are left untouched.

Linux

In the Linux kernel, the following vulnerability has been resolved: nfsd: don't free session slots that are still in use nfsd4_sequence() can free the very slot it is currently processing. When the session shrinker has reduced se_target_maxslots below se_fchannel.maxreqs, the shrink path checks three conditions before calling free_session_slots(): 1. se_target_maxslots < maxreqs (shrink was advertised) 2. slot->sl_generation == se_slot_gen (slot is up-to-date) 3. seq->maxslots <= se_target_maxslots (client acknowledges) However, seq->slotid is never checked against se_target_maxslots. A client using a slot in the range [se_target_maxslots, maxreqs) can satisfy all three conditions: its slot has the current generation (set by a prior SEQUENCE), and it sends sa_highest_slotid <= se_target_maxslots to acknowledge the reduction. free_session_slots() then kfrees every slot at index >= se_target_maxslots, including the caller's own slot. The function continues to write sl_seqid, sl_flags, sl_generation, and stores the dangling pointer in cstate->slot. Later, nfsd4_store_cache_entry() copies up to maxresp_cached bytes of the compound reply into the freed sl_data[] array, corrupting whatever slab object now occupies that address. Additionally, a concurrent thread processing SEQUENCE on a different high-numbered slot can have its slot freed out from under it. NFSD4_SLOT_INUSE is set under nn->client_lock before the lock is released, so any concurrent thread past SEQUENCE will have its slot marked. However, free_session_slots() does not check NFSD4_SLOT_INUSE before freeing. Fix both problems by: 1. Checking that the current request's slotid is below the shrink boundary. 2. Scanning slots in the to-be-freed range for NFSD4_SLOT_INUSE and deferring the shrink if any are active.

Linux

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix BUG_ON in nfsd4_alloc_layout_stateid on racing delegation revoke nfsd4_alloc_layout_stateid reads fp->fi_deleg_file without holding fi_lock when the parent stateid is a delegation. A concurrent delegation revoke via the laundromat can clear fi_deleg_file under fi_lock, causing nfsd_file_get() to return NULL and triggering the BUG_ON. This race is client-reachable: two NFS clients can trigger it by having one hold a delegation while another opens the same file to force a recall. When the first client doesn't respond to the recall, the laundromat revokes it. A concurrent LAYOUTGET from any client using the delegation stateid hits the race window. Fix this by taking fi_lock around the fi_deleg_file read in the SC_TYPE_DELEG path, matching the locking discipline of the find_any_file() arm, and replacing the BUG_ON with a graceful error return that cleans up the partially-initialized layout stateid.

Linux

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix UAF in async copy cancel and shutdown An async copy could be freed or used after free while a teardown caller (OFFLOAD_CANCEL, nfsd4_shutdown_copy, nfsd4_cancel_copy_by_sb) raced the copy kthread: - find_async_copy() bumped copy->refcount but left the copy on clp->async_copies, so the reaper's cleanup_async_copy() could run release_copy_files() concurrently with a cancel/shutdown caller. Both put and NULL nf_src/nf_dst without a common lock, double-putting the nfsd_file and freeing it early. - nfsd4_do_async_copy() set NFSD4_COPY_F_STOPPED before its final uses of the copy (nfsd_update_cmtime_attr() on copy->nf_dst, nfsd4_send_cb_offload()). nfsd4_stop_copy() treats a set STOPPED bit as "kthread done, skip kthread_stop()", so a teardown caller ran release_copy_files() -- which puts and NULLs nf_dst -- while the kthread still dereferenced it (NULL/UAF). - copy->copy_task was never pinned. The one-shot kthread self-reaps on return, so kthread_stop()'s get_task_struct() could touch a freed task_struct. - co_cb is embedded in the copy, but nfsd4_send_cb_offload() held a reference only on the client, so a concurrent teardown could free the copy while the CB_OFFLOAD callback was in flight. Fix the teardown lifetime as a whole: - find_async_copy() unlinks the copy (clear cp_clp, list_del_init) under async_lock; the cancel, shutdown, and sb-cancel paths drop the list-membership reference via nfs4_put_copy() after nfsd4_stop_copy(). Drop the now-redundant list_del fixup from cleanup_async_copy(). - Because unlinking hides the copy from the reaper, its cleanup_async_copy() can no longer remove the copy's s2s_cp_stateids entry; the cancel/shutdown/sb-cancel paths now call nfs4_free_copy_state() themselves (while cp_clp is still valid) so the entry does not dangle at freed memory for the laundromat and manage_cpntf_state() to dereference. - Give the kthread its own reference, taken in nfsd4_copy() before wake_up_process() and dropped at the end of nfsd4_do_async_copy(); call wake_up_process() before list_add(). - Pin the task_struct with get_task_struct() in nfsd4_copy(), released in nfs4_put_copy(), so kthread_stop() is safe whenever the kthread exits. Set NFSD4_COPY_F_STOPPED only in nfsd4_stop_copy(), which now always kthread_stop()s before release_copy_files(); completion is still reported via NFSD4_COPY_F_COMPLETED, so nfsd4_has_active_async_copies() is unaffected. Each teardown caller removes the copy from clp->async_copies first, so kthread_stop() runs exactly once. - Take a copy reference in nfsd4_send_cb_offload(), dropped in nfsd4_cb_offload_release(). The kthread still holds its own reference there, so the refcount_inc() cannot race the final free. - Read cp_clp with smp_load_acquire() to pair with the unordered set_bit()/clear_bit() writers (Documentation/atomic_bitops.rst).

Linux

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix XDR length calculation in nfsd4_ff_encode_layoutget The XDR buffer size calculation in nfsd4_ff_encode_layoutget() has multiple errors that can result in either an out-of-bounds write or leaking uninitialized kernel memory to the client: - fh_len doesn't account for XDR padding on the file handle data - uid and gid lengths use "8 + len" but xdr_encode_opaque() actually writes "4 + xdr_align_size(len)" bytes - ds_len omits the flags and stats_collect_hint fields (8 bytes), while len's header constant overestimates by 8 bytes -- these partially cancel but leave a net mismatch The worst case occurs with short strings (e.g. uid=0, gid=0 with an odd-sized file handle), where the function writes up to 5 bytes past the reserved XDR buffer. Conversely, when string lengths happen to be 4-byte aligned, the reservation is too large and stale buffer content is sent to the client. Fix this by breaking out every encoded field explicitly in the ds_len calculation, using xdr_align_size() for all variable-length opaque fields, and correcting the header constants.

Linux

In the Linux kernel, the following vulnerability has been resolved: nfsd: gate nfs3 setacl by argp->mask nfsd3_proc_setacl() calls set_posix_acl() unconditionally for both ACL_TYPE_ACCESS and ACL_TYPE_DEFAULT, passing argp->acl_access and argp->acl_default verbatim. The NFSv3 ACL decoder only populates those pointers when the corresponding mask bit is set: nfs3svc_decode_setaclargs() if (args->mask & NFS_ACL) decode into acl_access if (args->mask & NFS_DFACL) decode into acl_default /* otherwise the pointer stays NULL (pc_argzero) */ nfsd3_proc_setacl() set_posix_acl(.., ACL_TYPE_ACCESS, argp->acl_access) set_posix_acl(.., ACL_TYPE_DEFAULT, argp->acl_default) set_posix_acl(idmap, dentry, type, NULL) is the VFS "remove this ACL type" operation. A NULL pointer that means "the client did not send this arm" is therefore indistinguishable from "the client asked to remove this ACL". A SETACL with mask=NFS_ACL silently drops the directory's default ACL; mask=0 drops both. The sibling nfsd3_proc_getacl() already consults argp->mask before touching each arm; mirror that in setacl. Fix by wrapping each set_posix_acl() call in the matching mask bit check and initializing error to 0 before inode_lock so that a request with neither bit set leaves the on-disk ACLs untouched and returns nfs_ok. The out_drop_lock path and the unconditional posix_acl_release() at out: are preserved; both NULL-tolerate the skipped arms.

Linux

In the Linux kernel, the following vulnerability has been resolved: nfsd: initialize copy-notify stateid before publishing it nfsd4_copy_notify() finished initializing the cpntf state after nfs4_alloc_init_cpntf_state() had already linked it into the s2s_cp_stateids IDR and the parent's sc_cp_list, with cs_count == 1 (the membership reference) and none held for the caller. A racing OFFLOAD_CANCEL (crafted cl_id == nn->s2s_cp_cl_id plus the guessable so_id) could reach manage_cpntf_state() and free the entry, turning the caller's subsequent cpn_cnr_stateid read and cp_p_stateid/cp_p_clid writes into use-after-free. The owning clientid was also only recorded after publication, so it could not gate an ownership check in that window. Record cp_p_stateid and cp_p_clid inside nfs4_alloc_init_cpntf_state() before nfs4_init_cp_state() publishes the entry, and return it with an extra reference. The caller reads the stateid under that reference and drops it with nfs4_put_cpntf_state(); on a late error the laundromat reaps the entry.

Linux

In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent lock owner use-after-free during client teardown __destroy_client() releases a client's open owners, but a lock owner whose only reference is a blocked lock (nbl) stays on cl_ownerstr_hashtbl. client_has_state() does not count a bare owner, so DESTROY_CLIENTID can reach __destroy_client() with such owners present. __destroy_client() then walks the table, calling remove_blocked_locks() on each owner without a reference. Freeing a blocked lock drops the owner reference held via flc_owner. The per-net laundromat reaps blocked locks from nn->blocked_locks_lru independently of client state. The two paths share blocked_locks_lock only for the list splice, not the owner's lifetime. The laundromat therefore frees the owner as __destroy_client() dereferences it, a NULL dereference in remove_blocked_locks(). nfsd4_release_lockowner() holds a reference across the same call; __destroy_client() does not. Hold cl_lock across the walk, taking a reference and unhashing each owner, then drop it before remove_blocked_locks() and nfs4_put_stateowner(), which take blocked_locks_lock and cl_lock.

Linux

In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during admin state revocation A stateid holds only a bare pointer to its nfs4_client; a stateid reference does not pin it. The client survives only because __destroy_client() drains its stateids before free_client() runs. nfsd4_revoke_states() drops nn->client_lock across revoke_one_stid(), which dereferences the client to revoke a stateid and read clp->cl_minorversion. A teardown racing the dropped lock can free the client first. Pinning cl_rpc_users under client_lock blocks the DESTROY_CLIENTID and EXCHANGE_ID teardown, which refuses while cl_rpc_users is non-zero. force_expire_client() ignores it: once its wait for cl_rpc_users to reach zero has passed, a later pin goes unnoticed. Under client_lock, skip a client whose cl_time is already zero -- force_expire_client() clears it there before waiting -- otherwise pin cl_rpc_users before dropping the lock. The walk then either sees the expiry and skips, or pins in time for that wait to cover the revoke.

Linux

In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during delegation revoke A delegation stateid holds only a bare pointer to its owning nfs4_client and does not keep it alive. The client survives its stateids only because __destroy_client() drains cl_delegations and cl_revoked before free_client() runs. nfs4_laundromat() breaks that invariant: it unhashes an expired delegation from cl_delegations, drops deleg_lock, then revoke_delegation() relinks it onto cl_revoked under cl_lock. In that window the delegation is on neither list, so client_has_state() can report no remaining state. Every teardown path first requires cl_rpc_users to be zero, but the laundromat holds no such reference. A client whose recalled delegation has just timed out can therefore reach free_client() while revoke_delegation() is still about to dereference cl_lock, a use-after-free. Pin the client with cl_rpc_users across the revoke so teardown blocks until it completes, then reap the delegation from cl_revoked. A client already expiring reaps its own, so skip it and leave the delegation on del_recall_lru.

Linux

In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during NFSv4.0 revoked-state cleanup nfs40_clean_admin_revoked() takes a stateid reference under clp->cl_lock, drops nn->client_lock, and calls nfsd4_drop_revoked_stid(), which dereferences the stateid's client through s->sc_client->cl_lock. The stateid reference does not pin the client, so a teardown racing the dropped lock can free the client while nfsd4_drop_revoked_stid() is still using it. This cleanup runs from the laundromat, so a periodic sweep can race force_expire_client() driven by a write to the clients/<id>/ctl file. Skip a client that is already expiring and otherwise pin it with cl_rpc_users under client_lock before dropping the lock, matching nfsd4_revoke_states().

Linux

In the Linux kernel, the following vulnerability has been resolved: ceph: bound copied dentry name length in NFS export get_name ceph_get_name() copies the MDS-supplied name into the caller's NAME_MAX-sized buffer with memcpy(name, rinfo->dname, rinfo->dname_len) and then writes name[rinfo->dname_len] = 0, without checking dname_len against NAME_MAX. A malicious or buggy MDS that returns a LOOKUPNAME reply with dname_len > NAME_MAX overflows the buffer. __get_snap_name() copies rde->name / rde->name_len the same unchecked way. Impact: a malicious or compromised Ceph MDS overflows the NAME_MAX name buffer in a client's NFS-export get_name path, a slab out-of-bounds write reported by KASAN. Reachable when a CephFS mount is re-exported over NFS. Add ceph_export_copy_name(), which rejects lengths above NAME_MAX with -ENAMETOOLONG before the copy, and use it in both ceph_get_name() and __get_snap_name().

Linux

In the Linux kernel, the following vulnerability has been resolved: ceph: bound MDSCapAuth path and fs_name decode in handle_session() handle_session() decodes the MDSCapAuth records carried by a CEPH_SESSION_OPEN message (msg_version >= 6). For each record the match.path and match.fs_name byte strings are read by first decoding a 32-bit length and then copying that many bytes with the bare ceph_decode_copy(). Unlike the surrounding fields, which all use the _safe decode variants, these two copies are not preceded by a ceph_decode_need() bounds check, and the enclosing MDSCapAuth and MDSCapMatch struct_len fields are skipped rather than enforced as an upper bound. A length larger than the bytes remaining in the message front makes ceph_decode_copy() read past the end of the front buffer. The message front is a dedicated allocation (ceph_msg_new2() -> kvmalloc), so the over-read runs off that object. A malicious or compromised MDS can trigger this with the first post-connect message on mount, with no client-side user interaction; under KASAN it is reported as a slab-out-of-bounds read in handle_session(). Impact: a malicious MDS can force the kernel client to read up to 4 GiB past the message front allocation during session setup, crashing the client (out-of-bounds read). Switch both copies to ceph_decode_copy_safe(), which performs the ceph_decode_need() bounds check before the copy and branches to the existing bad label, matching the rest of the decoder and the error path that frees the partially decoded cap_auths array.

Linux

In the Linux kernel, the following vulnerability has been resolved: ceph: bound num_export_targets array for mds info v2/v3 ceph_mdsmap_decode() in fs/ceph/mdsmap.c reads num_export_targets from each per-mds info record and advances the decode cursor by num_export_targets * sizeof(u32) without first checking that many bytes remain. The only upper-bound check that catches a runaway cursor (*p > info_end) is gated on info_v >= 4, because info_end is left NULL for info_v 2 and 3. When the monitor sends an MDS map whose per-mds info version is 2 or 3 with an oversized num_export_targets, the cursor moves past the message front buffer and the later export-targets loop calls the unchecked ceph_decode_32() on out-of-bounds memory. A kernel client processes CEPH_MSG_MDS_MAP from its monitor session (net/ceph/mon_client.c dispatches it; fs/ceph/super.c routes it to ceph_mdsc_handle_mdsmap(), which sets end to the front buffer bound and calls ceph_mdsmap_decode()). A malicious or compromised monitor, or an on-path attacker on an unsigned/unencrypted messenger session, can therefore drive an out-of-bounds read in the client kernel; on x86_64 with KASAN it is reported as a slab-out-of-bounds read in ceph_mdsmap_decode(). The decoded values land in the internal info->export_targets[] array, so the consequence is a kernel out-of-bounds read, not an information leak to the attacker. Impact: a malicious or compromised Ceph monitor sending an MDS map with a per-mds info version of 2 or 3 and an oversized num_export_targets field triggers an out-of-bounds read in the CephFS client kernel. Add a ceph_decode_need() for the export-targets array before advancing the cursor, so the bound is enforced for every info_v >= 2, not only info_v >= 4. This mirrors the count-then-need idiom already used for m_data_pg_pools later in the same function. Compute the export-targets byte count with size_mul() and reuse that checked length when advancing the cursor, so the attacker-controlled num_export_targets multiplication fails closed on overflow rather than relying on the later kcalloc() guard.

Linux

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix UAF and buffer leak in cifs_check_trans2() for malformed secondary T2 When a valid primary TRANSACT2 response has been received (mid->resp_buf set, mid->multiRsp true) and a subsequent secondary response causes cifs_check_trans2() to return false -- either because the SMB header is invalid (malformed != 0) or because check2ndT2() rejects the PDU -- handle_mid() overwrites mid->resp_buf with the new buffer (leaking the primary buffer) and, because mid->multiRsp is set, skips the server->smallbuf/bigbuf NULL-out. When the user thread frees mid->resp_buf, server->smallbuf or server->bigbuf is left dangling; the demux thread reuses it for the next packet, resulting in a use-after-free. Combine both early-exit conditions and, when mid->multiRsp is already set, abort the pending transaction inline: set multiEnd, call dequeue_mid() with malformed=true, and return true so handle_mid() exits without touching mid->resp_buf or the server buffer pointers.

Linux

In the Linux kernel, the following vulnerability has been resolved: smb: client: clear ce->tgthint in free_tgts() When free_tgts() frees all structures in ce->tlist, ce->tgthint is left pointing to one of the freed cache_dfs_tgt structures. If ce->tgthint is not reset before it is used later, it results in a use-after-free. Set ce->tgthint to NULL in free_tgts() after the elements are freed to reflect that no elements remain.

Linux

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix ALIGN() overflow in symlink_data() error context loop The check added by commit 7d9a7f1f96cd ("smb/client: fix possible infinite loop and oob read in symlink_data()") compared the post-ALIGN length against the remaining buffer, but ALIGN() itself can overflow: for ErrorDataLength near UINT32_MAX (e.g. 0xFFFFFFF9), ALIGN(x, 8) wraps to 0, so the subsequent bounds check passes, and the loop advances by zero bytes leaving 'p' pointing into stale data. Fix by checking the raw ErrorDataLength against the remaining space before applying ALIGN(), then checking again after. Since raw_len is bounded by the buffer, raw_len + 7 cannot overflow, so the second check is an exact post-alignment bounds guard.

Linux

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read/write from unvalidated DataOffset in coalesce_t2() coalesce_t2() computes data pointers directly from server-supplied DataOffset fields with no validation against buffer bounds: data_area_of_tgt = (char *)&pSMBt->hdr.Protocol + get_unaligned_le16(&pSMBt->t2_rsp.DataOffset); data_area_of_src = (char *)&pSMBs->hdr.Protocol + get_unaligned_le16(&pSMBs->t2_rsp.DataOffset); data_area_of_tgt += total_in_tgt; ... memcpy(data_area_of_tgt, data_area_of_src, total_in_src); A small DataOffset can push a pointer below the actual byte area, overwriting header fields; a large one can push it past the buffer end, causing out-of-bounds heap reads (source) or writes (target). The BCC overflow guard does not prevent this: BCC reflects how much data is present, while DataOffset controls where in the buffer it starts. The "validate target area" comment present since the function was first written in 2005 was a placeholder that was never implemented. Add lower- and upper-bound checks for both data pointers before the memcpy, and before any target header fields are modified.

Linux

In the Linux kernel, the following vulnerability has been resolved: smb: client: reject a tree connect response whose byte count is too small CIFSTCon() bounds its strnlen() over the byte area with the server's ByteCount minus two, which for ByteCount 0 or 1 goes negative as an int and converts to a huge size_t. The later subtraction wraps the __u16 bytes_left, and that is what bounds cifs_strndup_from_utf16(): a bound of up to 65535 against a ~16 KB cifs_req_poolp object runs off the end of the slab object, and the bytes reach userspace through tcon->nativeFileSystem in /proc/fs/cifs/DebugData. Reject a byte area too small for what the parser consumes. Two bytes is the least it can consume, and no conformant response carries fewer. The new trace point is the 129th smb_eio_trace entry, which __mode(byte) cannot represent, so the attribute goes with it.

Linux

In the Linux kernel, the following vulnerability has been resolved: smb: client: restore the data_offset bound in is_valid_oplock_break() Commit 83bfbd0bb902 ("cifs: Remove the RFC1002 header from smb_hdr") changed the quantity this bound is measured against. It used to be srv->total_read minus the 4-byte RFC1002 preamble that total_read then included, so it was the SMB message length. The same commit stopped counting the preamble, and the mechanical substitution to srv->total_read - srv->pdu_size left an expression that is identically zero: standard_receive3() reads MID_HEADER_SIZE() bytes and then exactly pdu_length - MID_HEADER_SIZE() more, adding both to total_read. len is therefore 0, the subtraction below it wraps, and no __u32 DataOffset can exceed the result, so the check from commit 097f5863b1a0 ("cifs: read overflow in is_valid_oplock_break()") no longer rejects anything. Use total_read, which is now the message length on its own.

Linux

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: harden gss_unwrap_resp_priv length checks gss_unwrap_resp_priv() validates the RPCSEC_GSS opaque length with offset = (u8 *)(p) - (u8 *)head->iov_base; if (offset + opaque_len > rcv_buf->len) goto unwrap_failed; maj_stat = gss_unwrap(ctx->gc_gss_ctx, offset, offset + opaque_len, rcv_buf); Both operands are u32 and the sum is computed in u32. A reply with opaque_len near 0xffffffff makes offset + opaque_len wrap to a small value that is below rcv_buf->len, so the bound check passes and gss_unwrap() is called with end < begin. The check also lacks a lower bound, so any opaque_len in [0, GSS_KRB5_TOK_HDR_LEN) is accepted and forwarded to gss_krb5_unwrap_v2(), whose pre-decrypt header reads at ptr+4 and ptr+6 then run past the token. A krb5p NFS server returning a crafted RPCSEC_GSS reply can drive the client into out-of-bounds reads in gss_krb5_unwrap_v2() and the rotate_left() loop that follows. Fix by replacing the single combined check with three guards that are safe in u32 arithmetic and that enforce the RFC 4121 minimum outer token length: if (offset > rcv_buf->len) goto unwrap_failed; if (opaque_len > rcv_buf->len - offset) goto unwrap_failed; if (opaque_len < GSS_KRB5_TOK_HDR_LEN) goto unwrap_failed; The first guard makes the subtraction in the second guard unconditionally safe; offset is derived from a successful xdr_inline_decode() in the head kvec, so in practice it already satisfies the bound. The floor mirrors the server-side check added in commit 5b757c2e57a5 ("SUNRPC: svcauth_gss: enforce krb5 token minimum length").

Linux

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: wait for in-flight client TLS handshake callback xs_tls_handshake_sync() gives xs_tls_handshake_done() a reference to the lower transport before submitting the handshake request. On timeout or signal, the synchronous waiter drops that reference after calling tls_handshake_cancel(). handshake_req_cancel() returns false when handshake_complete() has already marked the request complete. In that case the completion callback can still be running, so dropping the callback-owned reference in the waiter can free the lower transport before xs_tls_handshake_done() stores xprt_err or drops its own reference. If cancellation loses to completion, wait until xs_tls_handshake_done() signals handshake_done and let the callback release its reference. This mirrors the server-side handshake lifetime handling and keeps the timeout or signal return value unchanged.

Linux

In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reject inline replies that overflow the pull-up buffer An RPC-over-RDMA client can request a reply, such as an NFS READ payload, without providing a Write list or a Reply chunk to carry it. When such a reply needs more scatter/gather entries than the device's Send Queue supports, svc_rdma_pull_up_needed() selects pull-up and svc_rdma_pull_up_reply_msg() linearizes the whole reply into sctxt->sc_xprt_buf. That buffer is only sc_max_req_size bytes, while the reply on this path is bounded only by the client's request, so svc_rdma_xb_linearize() copies past the end of the buffer and corrupts adjacent slab memory. The oversized length is then stored in sc_sges[0].length and posted, so the device also reads beyond the mapped region. The SGE-exhaustion branch is the only pull-up path that can exceed the buffer: the threshold branch pulls up only replies smaller than RPCRDMA_PULLUP_THRESH, and replies that fit the device's SGE budget are sent directly without linearization. Make svc_rdma_pull_up_needed() report -E2BIG when the reply it would pull up cannot fit sc_max_req_size, and fail the request with ERR_CHUNK as RFC 8166 Section 4.5.3 directs rather than dropping the connection. The helper no longer answers a simple yes/no question: it now reports pull-up, no pull-up, or -E2BIG for a reply too large to linearize. Rename svc_rdma_pull_up_needed() to svc_rdma_check_pull_up() so its name no longer implies a boolean predicate.

Linux

In the Linux kernel, the following vulnerability has been resolved: svcrdma: Validate Read chunk positions before reconstruction The RPC/RDMA Read chunk position field is supplied by the remote client and stored verbatim in the parsed chunk list. xdr_count_read_segments() checks only 4-byte alignment; it never compares the position against the received inline body length. In the single-chunk path, svc_rdma_read_complete_one() splits the head and tail kvecs at ch_position. A position past the inline body underflows the tail length, exposing adjacent slab memory to the upper XDR decoder. In the multi-chunk path, svc_rdma_read_multiple_chunks() computes gap lengths between chunks as unsigned subtractions from ch_position. Overlapping Read chunks cause these subtractions to underflow. A final position past the inline body likewise underflows the trailing gap length. svc_rdma_copy_inline_range() then copies past the receive buffer into request pages that are returned to the client through the Reply channel. Bound inline-range copies in svc_rdma_copy_inline_range() against the decoded inline RPC body saved in rc_saved_arg. Reject a single Read chunk positioned beyond that body, and reject multi-chunk lists where accumulated read bytes exceed the next chunk's position. Apply the same position and overlap checks in the call-chunk interleaving path.

Linux

In the Linux kernel, the following vulnerability has been resolved: net/smc: bound the peer rkey counts in SMC-Rv2 LLC messages On a link whose device has max_recv_sge == 1 there is no shared v2 receive buffer, and smc_llc_save_add_link_rkeys() takes the v2 extension from 44 bytes past the start of the queue entry's inline message: ext = (struct smc_llc_msg_add_link_v2_ext *)(llc_msg + SMC_WR_TX_SIZE); The entry is a 72-byte allocation and the extension starts at offset 68, so ext->num_rkeys at offset 94 is already past it. This happens on every SMC-Rv2 link addition, whatever the peer sends: [ 2.490065] BUG: KASAN: slab-out-of-bounds in smc_llc_save_add_link_rkeys+0x333/0x350 [ 2.490431] Read of size 2 at addr ffff8880056406de by task smctest/106 [ 2.490709] [ 2.490792] CPU: 0 UID: 0 PID: 106 Comm: smctest Not tainted 7.2.0-rc5-p1-g77a5d9d9c99f #32 PREEMPT(lazy) [ 2.490795] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 2.490798] Call Trace: [ 2.490803] <TASK> [ 2.490805] dump_stack_lvl+0x53/0x70 [ 2.490810] print_report+0xd0/0x630 [ 2.490828] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 2.490832] ? smc_llc_save_add_link_rkeys+0x333/0x350 [ 2.490834] kasan_report+0xce/0x100 [ 2.490836] ? smc_llc_save_add_link_rkeys+0x333/0x350 [ 2.490837] smc_llc_save_add_link_rkeys+0x333/0x350 [ 2.490839] ? smcr_buf_map_lgr+0x1bf/0x2b0 [ 2.490844] smc_llc_cli_add_link+0xca7/0x1e80 [ 2.490848] ? smc_llc_wait+0x355/0x810 [ 2.490850] ? __pfx_smc_llc_wait+0x10/0x10 [ 2.490851] ? __pfx_smc_llc_cli_add_link+0x10/0x10 [ 2.490853] ? __pfx_autoremove_wake_function+0x10/0x10 [ 2.490863] __smc_connect+0x3f5c/0x4980 [ 2.490873] ? __pfx_kernel_connect+0x10/0x10 [ 2.490888] ? __pfx___smc_connect+0x10/0x10 [ 2.490891] ? release_sock+0x148/0x1d0 [ 2.490894] smc_connect+0x42c/0x580 [ 2.490896] __sys_connect+0xfc/0x130 [ 2.490898] ? __pfx___sys_connect+0x10/0x10 [ 2.490900] ? handle_mm_fault+0x1a1/0x430 [ 2.490908] __x64_sys_connect+0x6d/0xb0 [ 2.490909] ? fpregs_assert_state_consistent+0x56/0xe0 [ 2.490917] do_syscall_64+0xf9/0x540 [ 2.490921] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 2.490924] RIP: 0033:0x421bb4 [ 2.490927] Code: ff f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d ad 34 09 00 00 74 13 b8 2a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 10 89 55 [ 2.490929] RSP: 002b:00007ffd473b01a8 EFLAGS: 00000202 ORIG_RAX: 000000000000002a [ 2.490935] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000421bb4 [ 2.490936] RDX: 0000000000000010 RSI: 00007ffd473b01d0 RDI: 0000000000000003 [ 2.490937] RBP: 0000000000003930 R08: 0000000000000004 R09: 0000000000000000 [ 2.490938] R10: 00007ffd473b0f98 R11: 0000000000000202 R12: 0000000000000006 [ 2.490939] R13: 00007ffd473b0f87 R14: 0000000000000003 R15: 00007ffd473b0f90 [ 2.490940] </TASK> [ 2.490941] [ 2.499545] Allocated by task 44: [ 2.499693] kasan_save_stack+0x33/0x60 [ 2.499860] kasan_save_track+0x14/0x30 [ 2.500026] __kasan_kmalloc+0x8f/0xa0 [ 2.500190] __kmalloc_cache_noprof+0x158/0x370 [ 2.500393] smc_llc_enqueue+0x72/0x560 [ 2.500559] smc_wr_rx_tasklet_fn+0x474/0xa80 [ 2.500747] tasklet_action_common+0x20f/0x8a0 [ 2.500945] handle_softirqs+0x18e/0x590 [ 2.501115] do_softirq+0x3b/0x60 [ 2.501266] __local_bh_enable_ip+0x61/0x70 [ 2.501446] __alloc_skb+0x732/0x890 [ 2.501604] rxe_init_packet+0x16b/0x4f0 [ 2.501783] prepare_ack_packet+0xb8/0x830 [ 2.501962] rxe_receiver+0x495/0x96e0 [ 2.502125] do_work+0x144/0x470 [ 2.502269] process_one_work+0x633/0x1030 [ 2.502450] worker_thread+0x45b/0xd10 [ 2.50261 ---truncated---

Linux

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in oplock break notification smb2_oplock_break_noti() reads opinfo->conn without any lock and dereferences it after two allocations which may sleep. When the durable handle owning the oplock is disconnected, session_fd_check() clears opinfo->conn and drops its conn reference under ci->m_lock, and the last ksmbd_conn_put() frees the connection. A break triggered by another connection that races with the teardown can then resurrect the freed connection: ksmbd_conn_get() is a plain atomic_inc, and the queued break work later dereferences the stale conn via ksmbd_conn_write(), a use-after-free reachable by any authenticated client holding a durable batch oplock. Thread the caller's inode into the notification path instead of taking a new reference on it. Every caller of oplock_break() already holds a live ksmbd_file (or an explicit ksmbd_inode_lookup_lock() reference, in the parent lease break paths) on the inode that owns the break target's oplock list, so ci cannot be freed during the call, and its lock can be taken without dereferencing opinfo->o_fp, which a concurrent close may free. Select and pin the connection under ci->m_lock, the same lock session_fd_check() and ksmbd_reopen_durable_fd() use to update opinfo->conn, so a concurrent detach either loses the race to the clear or keeps the connection alive until the notification work releases it. Transfer the reference to the work item and release it on allocation failures.

authorizerdev authorizer

Authorizer is an open-source, self-hostable authentication and authorization server. Prior to version 2.2.1, the `/authorize` endpoint accepts any `redirect_uri` without validating it against `AllowedOrigins`. When `response_type=token` or `response_type=id_token`, the server appends `access_token`, `id_token`, and `refresh_token` as query parameters and issues a 302 redirect to the attacker-supplied URL. An unauthenticated attacker can obtain the required `client_id` from the public `/graphql?query={meta{client_id}}` endpoint. A partial fix was applied in v2.0.1 to other handlers (`oauth_login`, `verify_email`, `magic_link_login`, `forgot_password`, `invite_members`, `oauth_callback`) but `/authorize` was not included. Version 2.2.1 contains a more complete fix.

LaciSynchroni server

Laci Synchroni is a decentralized mod and appearance sync server and plugin for Dalamud. Versions of the backend prior to 1.2.3 have an improper authentication vulnerability in the application's OAuth2 login flow. The application relies on client-side state by trusting the `UID` field inside the `Authentications` object of a user's local `config.json` file. By manually editing this local file on their PC prior to logging in, a user can supply an arbitrary UID. Because the server fails to validate that the authenticated OAuth2 identity matches the requested UID, an attacker can fully impersonate any target user and perform actions on their behalf. This issue has been resolved in version 1.2.3. The patch modifies `AuthorizeOauthAsync` inside the `SecretKeyAuthenticatorService` to strictly bind the lookup of the requested User ID (`requestedUid`) to the record of the successfully authenticated identity (`primaryUid`). The server will no longer load or return session tokens for a requested UID unless it matches the verified, authenticated database record. No known workarounds are available.

Unknown teddy-bear-customize-addon

The teddy-bear-customize-addon WordPress plugin through 1.0.5 does not properly validate uploaded files, relying on a client-supplied content type and preserving the original filename, allowing unauthenticated attackers to upload arbitrary PHP files and execute code on the server.