Mardi 1 septembre 2026

composer

Composer is a dependency Manager for the PHP language. From 1.0 until 2.2.30 and 2.10.3, a malicious dependency package from a custom Composer repository or an untrusted composer.lock file could set source.type to perforce and source.url to an rsh: or jsh: P4PORT value. When the Perforce p4 client was installed and Composer installed the package from source through composer install or composer update, including --prefer-source, Composer\Util\Perforce passed the address to p4 without validation, causing p4 to run a local command with the privileges of the user or CI account. Packagist.org does not permit Perforce source metadata. This issue is fixed in versions 2.2.30 and 2.10.3.

OpenAI Codex CLI · OpenAI Codex Desktop · OpenAI Codex Desktop (Microsoft Store package)

OpenAI Codex CLI for Windows, macOS, and Linux and Codex Desktop for Windows and macOS automatically collected Git repository metadata without disabling the repository-local core.fsmonitor setting. If a user opens or uses an attacker-prepared repository whose preserved .git/config sets core.fsmonitor to an attacker-controlled filesystem-monitor helper, Git can execute that helper while Codex collects repository metadata. The helper runs outside Codex's command sandbox and without a user-approval prompt, allowing attacker-controlled code to run with the user's privileges. The code can read, change, or delete the user's files and access other resources available to the user's account. An ordinary Git clone does not preserve the source repository's local .git/config; exploitation requires a repository delivered or copied with that configuration intact.

OpenAI Codex CLI · OpenAI Codex Desktop · OpenAI Codex Desktop (Microsoft Store package)

OpenAI Codex CLI for Windows, macOS, and Linux and Codex Desktop for Windows and macOS misclassified certain PowerShell commands as safe because their command-safety parser interpreted PowerShell's stop-parsing token (--%) differently than PowerShell itself. If a user opens an attacker-prepared repository and Codex follows its instructions, Codex can run a file-writing Git command without requesting user approval. On macOS and Linux, exploitation additionally requires separately installed PowerShell Core (pwsh) to be invoked. If filesystem protections permit the write, the command can modify Codex's configuration. If Codex later loads the modified configuration, it can launch an attacker-controlled MCP server and execute code with the user's privileges, allowing it to read, change, or delete files accessible to that account. The approval bypass does not disable filesystem sandboxing; the default filesystem sandbox on macOS and Linux can prevent writes outside permitted locations.

GNOME gvfs · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 7 Extended Lifecycle Support

A flaw was found in the SFTP backend in gvfs. When mounting a share and reading a file, a malicious SFTP server can cause read_reply() to process a length that exceeds the size requested by the client. The function does not verify the server-provided length against the allocated buffer size, causing the operation to write past the intended boundaries. This issue allows a malicious server to corrupt adjacent heap memory in the gvfsd-sftp process, resulting in a denial of service as the process aborts upon detecting the heap corruption or potentially allowing arbitrary code execution.

Erlang OTP

Missing Release of Resource after Effective Lifetime vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by sending valid request headers with a large Content-Length and then stalling before the body is complete. httpd_request_handler:handle_info/2 cancels the request timeout as soon as a parse step succeeds, which includes the headers, and the clause that handles a decoder asking for more data re-arms the socket with {active, once} without setting any further timer. httpd_request:whole_body/2 returns such a continuation whenever the bytes received are fewer than the announced Content-Length, so a well-formed request that stops mid-body leaves the worker waiting indefinitely. The periodic byte-rate check that would reclaim it is armed only when minimum_bytes_per_second is configured, which it is not by default. Repeating this across connections occupies every worker permitted by max_clients and denies service to legitimate clients at negligible bandwidth cost. This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.

Erlang OTP

Allocation of Resources Without Limits or Throttling vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by opening and holding open a large number of connections. The max_clients option is documented to default to 150, and the inets hardening guide presents that limit as the first layer of denial-of-service defence, but a server that does not set it explicitly accepts an unlimited number of simultaneous connections. Establishing the connections is sufficient; no valid request and no authentication are required. The accept gate in httpd_manager:handle_new_connection/4 reads the option with httpd_util:lookup/2, which returns undefined when the key is absent, rather than the three-argument form carrying the 150 default that the neighbouring get_ustate/2 uses. Erlang term ordering places every integer before every atom, so the Count =< Max guard holds for any connection count and the server never returns {reject, busy}. Each accepted connection occupies a worker process and a socket for as long as it is held, driving the node towards process, memory and file descriptor exhaustion. Servers that set max_clients explicitly are unaffected, because a configured value is applied as intended. This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2.

Erlang OTP

Missing Release of Resource after Effective Lifetime vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by sending a request with a chunked body whose chunk-size line is not a hexadecimal number. The worker serving the connection is never released and no timeout reclaims it, so repeating the request across connections occupies every available worker and denies service to legitimate clients. No authentication is required and the default configuration is affected. The chunk-size line must arrive in a write separate from the headers. When the body accompanies the headers, httpd_request_handler:handle_body/3 calls http_chunk:decode/3 inside a try ... catch throw:Error, so the {error, {chunk_size, _}} thrown by http_chunk:decode_size/4 is answered with 400 Bad Request. When the chunk size arrives later, the decoder is resumed through a bare catch in httpd_request_handler:handle_info/2, which converts the throw into a return value rather than raising it; the resulting error tuple is then treated as the next decoder continuation, the socket is re-armed, and the worker waits for data that never comes. The request timeout has already been cancelled at the point the headers were accepted, and the periodic byte-rate check is only armed when minimum_bytes_per_second is configured, which it is not by default. This issue affects OTP from OTP 18.1.4 before OTP 27.3.4.17, OTP 28.5.0.6, and OTP 29.0.6, corresponding to inets from 6.0.3 before 9.3.2.7, 9.6.2.3, and 9.7.2.

Erlang OTP

The Erlang/OTP httpc HTTP client does not enforce a limit on the total size of response headers received from a server. The max_header_size option defaults to nolimit, and httpc_response:parse_headers/6 accumulates every header into a list before the length check runs (which only fires after the terminating CRLF CRLF is received). A malicious or compromised HTTP server can send an arbitrarily large number of headers, or headers with very large values, causing the client process to allocate unbounded memory until the system runs out of memory or the BEAM VM crashes. A proof-of-concept server sending 100,000 headers of roughly 4000 bytes each caused the client VM to allocate over 13 GB of memory in under 30 seconds. Any application using httpc:request/4,5 to connect to untrusted servers is affected. No authentication is required: any server the client connects to (including via a redirect or man-in-the-middle) can trigger the exhaustion. This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.

Red Hat AMQ Broker 7 · Red Hat build of Apache Camel 4 for Quarkus 3 · Red Hat build of Apache Camel for Spring Boot 4 · Red Hat Fuse 7

A flaw was found in Jolokia's JSR-160 proxy functionality where insufficient validation of client-controlled JMX service URLs allows a bypass of the denylist introduced to mitigate CVE-2018-1000130. The proxy accepts a `target.url` value from a Jolokia POST request and passes it to `JMXServiceURL` and `JMXConnectorFactory` for establishing the remote JMX connection. The existing denylist only rejects URLs matching `service:jmx:rmi:///jndi/ldap:.*`, which can be bypassed using alternative valid JMX service URL forms, including `ldaps://` schemes or LDAP URLs with a non-empty JMX host component. These URLs are accepted as valid `JMXServiceURL` objects and can cause the Jolokia agent JVM to perform a JNDI lookup against an attacker-controlled LDAP endpoint. This can result in server-side request forgery (SSRF), forwarding of supplied JMX credentials to the remote endpoint, and potentially remote code execution depending on the classes and configuration available in the target JVM.

Hugging Face Transformers

A vulnerability in Hugging Face Transformers (versions 4.57.0 to 5.16.1) allows remote Python files to be written to local disk without user consent when using GenerativePreTrainedModel.load_custom_generate(). The function fetches and caches a remote module file before performing the required trust_remote_code consent check, inverting the security model enforced by other code-loading paths (such as AutoConfig, AutoModel, and AutoTokenizer). As a result, attacker‑controlled Python code from custom_generate/generate.py is copied into the user’s ~/.cache/huggingface/modules directory even if the user declines the trust prompt. Although execution is correctly gated, the file write is not reversible and can persist across sessions. This can lead to persistent, unauthorized files on disk and stale cache collisions where cached attacker code may later be executed during trusted model loads. The issue stems from an unconditional file write in dynamic_module_utils.py prior to any trust verification.

SUSE yast2-auth-client

A OS command injection vulnerability in yast2-auth-client allows an attacker who controls Active Directory configuration values to execute arbitrary commands as root on the configured host. Auth::AuthConf in src/lib/auth/authconf.rb assembles the Samba net ads join, net ads lookup -S and net ads testjoin invocations by interpolating configuration values into a single command string and passing that string to Open3.popen2 / Open3.capture2, which causes Ruby to run it through /bin/sh. The Organizational Unit (ou), dnshostname, AD user name and AD domain name values are neither validated nor shell-quoted.

SUSE yast2-samba-client

Improper neutralization of special elements used in an OS command in yast2-samba-client allows an attacker who controls the content of an Active Directory directory tree - a rogue domain controller, or a directory user delegated the right to create objects - to execute arbitrary commands as root on a machine being joined to that domain. This issue affects yast2-samba-client through 5.0.4.

ash-project ash_typescript

Allocation of Resources Without Limits or Throttling vulnerability in ash-project ash_typescript allows an unauthenticated attacker to exhaust the BEAM atom table and abort the node via client-supplied typed struct field names. resolve_typed_struct_field/2 in lib/ash_typescript/rpc/field_processing/field_selector.ex looks a client-supplied field name up in the typed struct's reverse map and, when it finds no match, falls back to String.to_atom/1. Because this runs before any field-existence check, an unresolvable name mints a permanent atom rather than being rejected as unknown. Atoms are never garbage collected, so a request carrying many distinct names on a typed struct field grows the atom table until the VM aborts at its limit. This issue affects ash_typescript: from 0.11.0 before 0.18.0.

ash-project ash_typescript

Allocation of Resources Without Limits or Throttling vulnerability in ash-project ash_typescript allows an unauthenticated attacker to exhaust the BEAM atom table and abort the node via client-supplied RPC field names. AshTypescript.FieldFormatter.convert_to_field_atom/2 in lib/ash_typescript/field_formatter.ex converts a client-supplied field name to an atom with String.to_atom/1 when no matching atom already exists. It delegates first to parse_input_field/2, which resolves the name with String.to_existing_atom/1 and falls back to returning the plain string; convert_to_field_atom/2 then mints an atom from that string rather than treating the name as unknown. RPC field selection reaches it for every requested field name through AshTypescript.Rpc.FieldProcessing.FieldSelector, which resolves each name before checking that the field exists, with no allowlist, length bound, or rate limit. Atoms are never garbage collected, so each distinct name mints a permanent one and the VM aborts once the atom table limit is reached. A field name over 255 characters additionally raises an uncaught SystemLimitError. This issue affects ash_typescript: from 0.1.0 before 0.18.0.

Backblaze Client

A vulnerability in the Backblaze Client allows a local user to make the system not bootable by creating a link from Backblaze's folder to Windows OS system files during a backup. Successful exploitation requires an administrator-level system change that results in the absence of specific Windows OS security controls. This vulnerability is due to improper link resolution.