Lundi 31 août 2026

zephyrproject zephyr

net_ipv6_send_ns() in subsys/net/ip/ipv6_nbr.c allocates a transmit net_pkt for a Neighbor Solicitation. When it is called with a data packet pending on an unresolved neighbor and that neighbor's pending_queue is already non-empty (an NS is already outstanding), the function appends the data packet and returns early without ever sending the NS via net_send_data() or releasing it with net_pkt_unref(). The freshly allocated NS net_pkt and its attached TX buffers are held only by a local variable and are leaked permanently, never returning to CONFIG_NET_PKT_TX_COUNT / CONFIG_NET_BUF_TX_COUNT. The leaking branch sits on the normal IPv6 transmit path: net_ipv6_prepare_for_send() (called from net_if.c) invokes net_ipv6_send_ns() for any outbound or forwarded IPv6 packet whose next hop is not yet in the neighbor cache. An on-link (adjacent) attacker can drive it deterministically by sending a burst of request packets (for example ICMPv6 echo requests or UDP datagrams) that all spoof a single non-existent on-link source address: the node generates a reply to each, the first reply queues an NS, and every subsequent reply during the roughly three-second INCOMPLETE resolution window takes the leaking branch and loses one TX packet. Router-configured nodes forwarding attacker traffic toward a non-existent on-link host leak identically. Because the leaked packets are never reclaimed and CONFIG_NET_PKT_TX_COUNT defaults to only 4 (14 for Ethernet), a brief low-rate burst exhausts the TX pool. Once exhausted the node can no longer allocate any transmit packet and cannot send TCP/UDP, ARP/ND, or any reply at all, producing a complete and persistent network denial of service that does not self-heal until reboot. The fix releases the unsent NS packet with net_pkt_unref(pkt) before the early return.

zephyrproject zephyr

When Ethernet bridging is enabled (CONFIG_NET_ETHERNET_BRIDGE), eth_bridge_input_process() in subsys/net/l2/ethernet/bridge/bridge_input.c decides how each frame received on a bridge member interface is handled. For frames that must also be delivered to the local stack, the code called eth_bridge_handle_locally() and returned NET_OK. That helper does not consume the packet — it only calls bridge_iface_recv() (via virtual_recv()), which returns NET_CONTINUE without taking ownership of pkt. The NET_OK verdict then propagates through ethernet_recv() up to processing_data() in subsys/net/ip/net_core.c, where NET_OK is interpreted as "the packet was consumed, do not free it." Because no consumer actually took ownership, the RX net_pkt is never returned to the pool and is leaked. The concretely reproducible leak occurs for frames whose EtherType has no registered L3 handler when CONFIG_NET_ETHERNET_FORWARD_UNRECOGNISED_ETHERTYPE is set (default y when CONFIG_NET_SOCKETS_PACKET is enabled): the fall-through L3 dispatch does not overwrite the NET_OK verdict, so ethernet_recv() returns NET_OK and the buffer is never released. Any device on a bridged L2 segment can emit broadcast/multicast frames carrying an arbitrary EtherType with no authentication. Each such frame permanently consumes one buffer from the finite RX pool (CONFIG_NET_PKT_RX_COUNT), so a brief broadcast flood exhausts the pool and the device can no longer receive traffic until it is rebooted — a persistent denial of service. There is no confidentiality or integrity impact. The fix makes eth_bridge_handle_locally() propagate the real net_verdict and return NET_CONTINUE for locally-kept frames, writing the bridge interface back through a new dst_iface out-parameter so the packet follows the normal receive path and is unreferenced exactly once.

zephyrproject zephyr

The LwM2M JSON content formatter's get_string() in subsys/net/lib/lwm2m/lwm2m_rw_json.c copies a parsed JSON string into a caller-supplied buffer and NUL-terminates it. The length guard used if (string_length > buflen), which accepts a string whose length is exactly buflen. After memcpy() fills the whole buffer, buf[string_length] = '\0' then writes one byte past the end of the buffer (CWE-787). The string value and its length are taken directly from the incoming CoAP payload during a LwM2M WRITE: do_write_op_json() parses the payload obtained from coap_packet_get_payload(), and get_string() is invoked from lwm2m_write_handler() (engine_get_string() in subsys/net/lib/lwm2m/lwm2m_message_handling.c) for a LWM2M_RES_TYPE_STRING resource. The destination buf/buflen is either the resource instance's fixed data buffer (res_inst->data_ptr/max_data_len) or the engine validation buffer (msg->ctx->validate_buf). A LwM2M server (the client's DTLS peer) can therefore write a string resource with a value whose length equals the target buffer size and force a one-byte overflow. The overflow is a single out-of-bounds write of the constant byte 0x00 immediately past the resource or validation buffer, corrupting the adjacent byte in memory. It is not an information leak and the written value is fixed, so it is not a direct code-execution primitive, but it can corrupt adjacent state (an adjacent resource value, a length/flag field, or a struct field) and cause data corruption or a crash. Triggering the write is deterministic; the resulting impact depends on memory layout. The fix changes the guard to string_length >= buflen, rejecting the exact-length case and aligning the JSON formatter with the other content formatters (lwm2m_rw_plain_text.c, lwm2m_rw_oma_tlv.c, lwm2m_rw_senml_json.c, lwm2m_rw_cbor.c, lwm2m_rw_senml_cbor.c), which already used the correct boundary check.

zephyrproject zephyr

The Silicon Labs SiWx917 WiFi driver's transmit callback siwx91x_send() in drivers/wifi/siwx91x/siwx91x_wifi.c frees a network packet it does not own. In the Zephyr TX path the net_pkt is owned by the L2/networking stack; the driver only borrows it to copy the frame bytes into a local net_buf. Before the fix, after transmitting, siwx91x_send() additionally called net_pkt_unref(pkt) on the caller-owned packet, dropping its last reference and returning it to the shared packet pool prematurely. This code path is compiled in by default (CONFIG_WIFI_SILABS_SIWX91X_NET_STACK_NATIVE). The caller, ethernet_send() in subsys/net/l2/ethernet/ethernet.c, keeps using the packet after the driver returns: it reads net_pkt_get_len(pkt), updates TX statistics, and then performs its own net_pkt_unref(pkt). Because the driver already released the packet, these are use-after-free reads followed by a second unref (a double free). When concurrent network activity recycles the freed slab slot between the two unrefs, the trailing unref decrements a different, live packet's reference count and frees it, corrupting the net_pkt pool shared by both the receive and transmit paths. The defect is exercised by ordinary transmission over the native-stack SiWx917 WiFi interface, and an adjacent attacker on the same WiFi network can induce transmissions (for example ARP or ICMP echo replies, or TCP handshakes) to drive the path. The primary observable impact is loss of availability (transmit hangs and crashes from pool corruption), with race-dependent memory corruption of the kernel networking buffer pool. The fix removes the erroneous net_pkt_unref(pkt) from siwx91x_send(); the driver's receive-path unref, which correctly frees a packet the driver itself allocated, is unaffected.