Semaine du 24 août au 30 août 2026

Linux

In the Linux kernel, the following vulnerability has been resolved: mm: mglru: fix stale batch updates after memcg reparenting The mglru page table walker batches per-generation size deltas in walk->nr_pages while walking page tables without holding the lruvec lock. The reset_batch_size() later folds those deltas into walk->lruvec under the lruvec lock. The page table walker can run concurrently with the memcg reparenting path as follows: CPU0 CPU1 ==== ==== walk_mm --> walk_page_range --> update_batch_size --> walk->nr_pages += delta mem_cgroup_css_offline --> memcg_reparent_objcgs --> lock lruvec lru_gen_reparent_memcg --> reparent child folios to parent unlock lruvec lock lruvec reset_batch_size --> child lrugen->nr_pages += delta This will trigger the following warning in lru_gen_exit_memcg(): VM_WARN_ON_ONCE(memchr_inv(lruvec->lrugen.nr_pages, 0, sizeof(lruvec->lrugen.nr_pages))); And the user-visible impact of underestimated nr_pages in MGLRU was premature OOMs because MGLRU does not try to reclaim memory when nr_pages reaches zero, but there are still more pages. To fix it, make reset_batch_size() check CSS_DYING under RCU before flushing the pending batch. A non-dying memcg keeps the original lruvec stable against RCU-delayed offlining; a dying memcg redirects the deltas to the first non-dying ancestor.

Linux

In the Linux kernel, the following vulnerability has been resolved: igc: remove napi_synchronize() in igc_down() When an AF_XDP zero-copy application is killed abruptly, the XSK pool is torn down but NAPI keeps polling. igc_clean_rx_irq_zc() then returns the full budget on every poll, so napi_complete_done() never clears NAPI_STATE_SCHED. igc_down() calls napi_synchronize() before napi_disable(), so it spins forever waiting for that bit and the interface never goes down. Drop the napi_synchronize() and let napi_disable() do the job -- it sets NAPI_STATE_DISABLE, which forces the stuck poll to complete. Reorder it ahead of igc_set_queue_napi() so the NAPI mapping is cleared only after polling has stopped, matching the recent igb fix b1e067240379.

Linux

In the Linux kernel, the following vulnerability has been resolved: power: supply: max17040: handle missing status supplier MAX17040 does not report charger state itself, so the driver forwards POWER_SUPPLY_PROP_STATUS to a supplier power supply. If no supplier is registered, power_supply_get_property_from_supplier() returns -ENODEV and leaves the output value untouched. max17040_get_property() currently ignores that error and returns success, so userspace can read an uninitialized status value from the battery power supply. This happens on systems that use the fuel gauge without a charger supplier relationship in firmware. Return POWER_SUPPLY_STATUS_UNKNOWN when no supplier provides STATUS, and propagate other supplier lookup errors.

Linux

In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix missing mem scrub at clear key import in cca_clr2cipherkey() The helper function _ip_cprb_helper() uses internal buffer memory for building and processing CPRBs. After use this buffer was never scrubbed which could lead to leaving for example clear key material in memory which could be exposed via tricky reuse of this same memory. Extend the _ip_cprb_helper() function with another parameter 'scrub' used to steer scrubbing of this buffer. So now the caller has the opportunity to decide if scrubbing is needed or not. Extend the clear key to secure key token import process in function cca_clr2cipherkey() to tell the helper function from above to scrub the cprb buffer when the clear key value is part of the request data. Add explicit scrubbing on return from function cca_clr2cipherkey() for the random EXOR buffer and the cprb buffer. Overall this cleans the internal used buffer in case of clear key import to prevent sensitive data to get exposed.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: check if dml21_add_phantom_plane() is successful Verify that the phantom plane was allocated to avoid a later segfault. (cherry picked from commit 5adb54abe5a8e82cbff7f8806db30a5f4924329f)

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: use proper context for logging The same as the rest of the code, get_ss_info_from_atombios() uses calc_pll_cs->ctx->logger for logging. But calc_pll_cs->ctx is initialized only later in calc_pll_max_vco_construct(). Therefore, any output using DC_LOG_SYNC() leads to a NULL pointer deference in get_ss_info_from_atombios(). According to Sashiko, the very same problem exists in dce112_get_pix_clk_dividers() and dcn3_get_pix_clk_dividers() too. To avoid accessing the NULL context, use clk_src->base.ctx->logger everywhere. That context in base is initialized earlier in dce110_clk_src_construct() and dce112_clk_src_construct(). Before get_ss_info_from_atombios() or Sashiko's get_pix_clk_dividers functions above are actually called. This is done by redefining DC_LOGGER to CTX->logger. Before: dce110_clk_src_construct() did: -> sets clk_src->base.ctx = ctx; -> ss_info_from_atombios_create() -> get_ss_info_from_atombios() <- uses calc_pll_cs->ctx # BOOM -> calc_pll_max_vco_construct() <- sets calc_pll_cs->ctx After: dce110_clk_src_construct() does: -> sets clk_src->base.ctx = ctx; -> ss_info_from_atombios_create() -> get_ss_info_from_atombios() <- uses clk_src->base.ctx (cherry picked from commit 6f16fcbb0c46a87e3d9685407e906573d60104b0)

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix missing authorization check in KFD_IOC_DBG_TRAP_DISABLE Prevent unauthorized termination of active GPU debug sessions. Previously, users with /dev/kfd access could terminate another process's debug session without proper ownership or ptrace authorization. (cherry picked from commit 4db4c5ffd5585b72622ecf6ffedf2da258ee23f5)

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: enforce cursor size limits for MOB cursors vmw_cursor_plane_atomic_check() bounds cursor width and height only on the legacy update path; the SVGA_CAP2_CURSOR_MOB path -- the default on modern hosts -- accepts any size. When the requested size exceeds SVGA_REG_CURSOR_MAX_DIMENSION or SVGA_REG_MOB_MAX_SIZE, vmw_cursor_mob_get() returns -EINVAL and leaves vps->cursor.mob NULL. Its return value is then discarded in vmw_cursor_plane_prepare_fb(), so the subsequent vmw_cursor_update_mob() calls vmw_bo_map_and_cache(NULL) and oopses inside vmw_bo_map_and_cache_size() on the tbo.base.size load. Reachable from any DRM master via DRM_IOCTL_MODE_CURSOR2 with a sufficiently large width or height (e.g. cursor_max_dim + 1). Reject oversized cursors in atomic_check for both MOB-backed cursor update types. The MOB byte-size limit only applies to the SVGA_CAP2_CURSOR_MOB path (vmw_cursor_mob_size() returns 0 for GB_ONLY); compute the required MOB size in 64-bit to avoid overflow when very large dimensions are requested. In prepare_fb only call vmw_cursor_mob_get()/_map() for VMW_CURSOR_UPDATE_MOB -- the GB_ONLY path uses bo->map.virtual directly and would otherwise be silently downgraded to NONE on hosts without SVGA_CAP2_CURSOR_MOB (where vmw_cursor_mob_get() always returns -EINVAL). Degrade the update to NONE if vmw_cursor_mob_get() or vmw_cursor_mob_map() fails so the update path does not run with a NULL backing MOB.

Linux

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Avoid double-deactivate of IRQs in the nested context In the nested state, the physical interrupt has already been deactivated through the HW bit in the LR. The extra deactivation would be harmless but can hit an errata case on AmpereOne, so avoid it here. On AmpereOne, deactivating a physical interrupt through ICC_DIR_EL1 or ICC_EOIR1_EL1 (depending on EOImode) which is not active, but is the highest priority pending interrupt causes the cpu to lose the interrupt pending state and also prevents the delivery of future interrupts.

Linux

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix double free of wq, engine, and group structs The release callbacks for wq, engine, and group devices (idxd_conf_wq_release, idxd_conf_engine_release, idxd_conf_group_release) each call kfree() on the enclosing struct. The setup error paths and cleanup functions also call kfree() explicitly after put_device(), producing a double free whenever put_device() drops the reference count to zero and fires the release. In the setup functions, device_initialize() is called before device_add(), so the reference count is exactly 1 at the error sites. put_device() unconditionally fires the release, which frees the struct; the subsequent explicit kfree() then operates on freed memory. For idxd_setup_wqs(), the wq release callback also owns opcap_bmap and wqcfg. The error unwind additionally freed those fields explicitly before calling put_device(), causing further double frees on both. Remove the redundant explicit kfree() calls from all setup error paths and cleanup functions for wq, engine, and group structs, delegating sole ownership of those allocations to the release callbacks.

Linux

In the Linux kernel, the following vulnerability has been resolved: erofs: ensure valid f_path for page cache sharing Previously, backing files for page cache sharing were set up with f_path left as NULL (only f_inode was valid). It worked, but a recent mincore fix relies on f_path.mnt and crashes (found by "erofs/028" on 7.2-rc4): BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 3 UID: 0 PID: 675528 Comm: fincore Not tainted 7.2.0-rc4-00002-g[]-dirty #1 PREEMPT(lazy) Hardware name: Red Hat KVM, BIOS 1.16.0-4.al8 04/01/2014 RIP: 0010:__do_sys_mincore+0xc0/0x2c0 ... Specify valid paths using valid disconnected dentries together with erofs_ishare_mnt instead of leaving f_path empty, so they are more like real backing files in a pseudo filesystem and standard backing_file_open() can be used directly.

Linux

In the Linux kernel, the following vulnerability has been resolved: hwmon: (sht3x) Fix unaligned accesses Sashiko reports: In sht3x_update_client(), the 16-bit temperature and humidity values are extracted from a stack-allocated byte array using be16_to_cpup(). The pointers passed to this function are calculated as buf and buf + 3. Since the difference between the two pointers is an odd number of bytes, at least one of them is guaranteed to be at an unaligned offset. This will trigger an alignment fault on strict-alignment architectures such as ARMv5 or SPARC, resulting in a kernel panic. Fix the problem by using get_unaligned_be16() instead of be16_to_cpup(), and put_unaligned_be16() instead of cpu_to_be16().

Linux

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Initialize hba->rpmbs list in ufshcd Initialize the hba->rpmbs list in ufshcd_alloc_host() to prevent NULL pointer dereference in the device teardown path if ufs_rpmb_probe() fails.

Linux

In the Linux kernel, the following vulnerability has been resolved: tracing/mmiotrace: Add NULL check for mmio_trace_array in logging functions mmio_trace_rw() and mmio_trace_mapping() retrieve mmio_trace_array into tr and pass it to __trace_mmiotrace_rw() and __trace_mmiotrace_map(). If these functions are invoked while mmio_trace_array is NULL (e.g. before initialization or after disabled), accessing tr->array_buffer.buffer will result in a NULL pointer dereference crash. Fix this by adding an explicit NULL check for tr at the beginning of __trace_mmiotrace_rw() and __trace_mmiotrace_map().

Linux

In the Linux kernel, the following vulnerability has been resolved: riscv: drop __init from vec_check_unaligned_access_speed_all_cpus This function runs within a kthread and need not necessarily finish before system finishes boot and free_initmem() unmaps the .init.text section. This function makes calls to SBI for probing unaligned access speed, and if this is slow for some reason (say some debug prints were added to SBI), the kthread can still be running at this point and result in an instruction page fault when trying to fetch from the freed region. [ 25.642087] Unable to handle kernel paging request at virtual address ffffffff80a04ef8 [ 25.646694] Current vec_check_unali pgtable: 4K pagesize, 48-bit VAs, pgdp=0x00004000316e9000 [ 25.653170] [ffffffff80a04ef8] pgd=000010004be7e401, p4d=000010004be7e401, pud=000010004be7e001, pmd=000010000c3000e3 [ 25.661244] Oops [#1] [ 25.662997] Modules linked in: [ 25.665357] CPU: 3 UID: 0 PID: 42 Comm: vec_check_unali Not tainted 7.0.0-tt-blackhole-asrinivasan-00007-g30ff73f18211 #570 PREEMPTLAZY [ 25.674669] Hardware name: Tenstorrent Blackhole (DT) [ 25.678545] epc : vec_check_unaligned_access_speed_all_cpus+0x18/0x2c [ 25.683458] ra : vec_check_unaligned_access_speed_all_cpus+0x18/0x2c [ 25.688372] epc : ffffffff80a04ef8 ra : ffffffff80a04ef8 sp : ffff8f8000203e20 [ 25.693874] gp : ffffffff814dc168 tp : ffffaf8001ad9900 t0 : 0000000000000000 [ 25.699401] t1 : fffffffffffffff0 t2 : ffffaf8001ad9a10 s0 : ffff8f8000203e30 [ 25.704912] s1 : ffffaf80018dc780 a0 : 0000000000000000 a1 : 0000000000000002 [ 25.710407] a2 : 00000000000001f0 a3 : 0000000000000018 a4 : 0000000000000000 [ 25.715917] a5 : 0000000000000000 a6 : ffffaf8001c03d98 a7 : ffffaf8001c03e30 [ 25.721419] s2 : ffff8f8000023c98 s3 : ffffaf8001aa1240 s4 : ffffffff80a04ee0 [ 25.726937] s5 : 0000000000000000 s6 : 0000000000000000 s7 : 0000000000000000 [ 25.732450] s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000000000000000 [ 25.737944] s11: 0000000000000000 t3 : 0000000000000002 t4 : 0000000000000402 [ 25.743481] t5 : 0000000000000040 t6 : 0000000000000004 ssp : 0000000000000000 [ 25.749024] status: 0000000200000120 badaddr: ffffffff80a04ef8 cause: 000000000000000c [ 25.755060] [<ffffffff80a04ef8>] vec_check_unaligned_access_speed_all_cpus+0x18/0x2c [ 25.760964] [<ffffffff80047a10>] kthread+0xd8/0xfc [ 25.764660] [<ffffffff80010c48>] ret_from_fork_kernel+0x18/0x1c4 [ 25.769220] [<ffffffff80895fe6>] ret_from_fork_kernel_asm+0x16/0x18 [ 25.774018] Code: cccc cccc cccc cccc cccc cccc cccc cccc cccc cccc (cccc) cccc Drop __init from its signature so that this doesn't happen.

Linux

In the Linux kernel, the following vulnerability has been resolved: iommufd/viommu: Release the igroup lock on the vdevice_size error path iommufd_vdevice_alloc_ioctl() takes idev->igroup->lock, then validates the driver's vdevice_size against the core structure size with a WARN_ON_ONCE. On failure that guard jumps to out_put_idev, below out_unlock_igroup, so it skips the mutex_unlock(), leaving the igroup lock held and deadlocking the next vDEVICE operation on that group. Jump to out_unlock_igroup instead.

Linux

In the Linux kernel, the following vulnerability has been resolved: mm: migrate_device: fix pte_pfn/pte_dirty called on non-present PTE pte_pfn() and pte_dirty() have undefined behaviour when called on a non-present PTE. In migrate_vma_collect_pmd(), these functions may be invoked on non-present entries (e.g., device-private entries), leading to potential crashes from pte_pfn() or incorrect dirty folio accounting from pte_dirty(). Fix both by guarding with pte_present() checks.

Linux

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix potential NULL pointer dereference dasd_release_space() checks the implementation of the is_ese() discipline function before calling it to determine if a given device is an ESE DASD. The current usage of the logical AND operator will lead to a NULL pointer dereference as the function is called even if the function pointer is NULL. Fix this by using the logical OR operator.

Linux

In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1]

Linux

In the Linux kernel, the following vulnerability has been resolved: bpf: Disable xfrm_decode_session hook attachment BPF LSM programs can currently attach to xfrm_decode_session(). That hook may return an error, but security_skb_classify_flow() calls it from a void path and triggers BUG_ON() if an error is returned. Disable BPF attachment to the hook to prevent a BPF LSM program from turning packet classification into a full panic.

Linux

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: LAG, MPESW, Fix missing complete() on devcom error mlx5_mpesw_work() returned without calling complete() when mlx5_lag_get_devcom_comp() returned NULL. A caller that queued the work and waited on mpesww->comp would block indefinitely. Funnel the early-return path through a new "complete" label so the waiter is always woken.

Linux

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: sco: Fix a race condition in sco_sock_timeout() sco_sock_timeout() runs asynchronously and lock_sock(sk). If the socket is closing while the timer is running, it holds the same lock (lock_sock(sk)) twice, leading to a deadlock. CPU 0 CPU 1 ==================== ====================== sco_sock_close() sco_sock_timeout() lock_sock(sk) // <-- LOCK __sco_sock_close() sco_chan_del() sco_conn_put() sco_conn_free() disable_delayed_work_sync() lock(sk) // <-- SAME LOCK Fix this by moving disable_delayed_work_sync() outside of lock_sock(sk), ensuring that no lock_sock(sk) is held before sco_sock_timeout(). Lockdep splat: WARNING: possible circular locking dependency detected 6.13.0-rc4 #7 Not tainted syz-executor292/9514 is trying to acquire lock: ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: rcu_lock_acquire sect/v6.13-rc4/./include/linux/rcupdate.h:337 [inline] ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: rcu_read_lock sect/v6.13-rc4/./include/linux/rcupdate.h:849 [inline] ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: start_flush_work sect/v6.13-rc4/kernel/workqueue.c:4137 [inline] ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: __flush_work+0xd1/0xc40 sect/v6.13-rc4/kernel/workqueue.c:4195 but task is already holding lock: ffff88807db3a258 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: lock_sock sect/v6.13-rc4/./include/net/sock.h:1623 [inline] ffff88807db3a258 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: sco_sock_close+0x25/0x100 sect/v6.13-rc4/net/bluetooth/sco.c:524 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}: lock_acquire+0x1c4/0x520 sect/v6.13-rc4/kernel/locking/lockdep.c:5849 lock_sock_nested+0x48/0x130 sect/v6.13-rc4/net/core/sock.c:3622 lock_sock sect/v6.13-rc4/./include/net/sock.h:1623 [inline] sco_sock_timeout+0xbe/0x270 sect/v6.13-rc4/net/bluetooth/sco.c:158 process_one_work sect/v6.13-rc4/kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa99/0x18f0 sect/v6.13-rc4/kernel/workqueue.c:3310 worker_thread+0x8a9/0xd80 sect/v6.13-rc4/kernel/workqueue.c:3391 kthread+0x2c6/0x360 sect/v6.13-rc4/kernel/kthread.c:389 ret_from_fork+0x4e/0x80 sect/v6.13-rc4/arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 sect/v6.13-rc4/arch/x86/entry/entry_64.S:244 -> #0 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}: check_prev_add sect/v6.13-rc4/kernel/locking/lockdep.c:3161 [inline] check_prevs_add sect/v6.13-rc4/kernel/locking/lockdep.c:3280 [inline] validate_chain+0x1888/0x5760 sect/v6.13-rc4/kernel/locking/lockdep.c:3904 __lock_acquire+0x13b4/0x2120 sect/v6.13-rc4/kernel/locking/lockdep.c:5226 lock_acquire+0x1c4/0x520 sect/v6.13-rc4/kernel/locking/lockdep.c:5849 touch_work_lockdep_map sect/v6.13-rc4/kernel/workqueue.c:3909 [inline] start_flush_work sect/v6.13-rc4/kernel/workqueue.c:4163 [inline] __flush_work+0x70f/0xc40 sect/v6.13-rc4/kernel/workqueue.c:4195 __cancel_work_sync sect/v6.13-rc4/kernel/workqueue.c:4351 [inline] disable_delayed_work_sync+0xbb/0xf0 sect/v6.13-rc4/kernel/workqueue.c:4514 sco_conn_free sect/v6.13-rc4/net/bluetooth/sco.c:95 [inline] kref_put sect/v6.13-rc4/./include/linux/kref.h:65 [inline] sco_conn_put+0x18f/0x270 sect/v6.13-rc4/net/bluetooth/sco.c:107 sco_chan_del+0xe2/0x210 sect/v6.13-rc4/net/bluetooth/sco.c:236 sco_sock_close+0x8f/0x100 sect/v6.13-rc4/net/bluetooth/sco.c:526 sco_sock_release+0x62/0x2d0 sect/v6.13-rc4/net/blueto ---truncated---

Linux

In the Linux kernel, the following vulnerability has been resolved: hwmon: (occ) unregister sysfs devices outside occ lock occ_active(false) and occ_shutdown() unregister sysfs-backed devices while occ->lock is held. hwmon_device_unregister() and sysfs_remove_group() can wait for active sysfs callbacks to drain, and those callbacks can enter the OCC update path and try to take occ->lock again. That gives the unregister paths the lock ordering occ->lock -> sysfs callback drain, while a callback has the opposite edge sysfs callback -> occ->lock. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the real unregister and callback carrier: occ_shutdown() hwmon_device_unregister() occ_show_temp_1() occ_update_response() Lockdep reported the circular dependency with occ_shutdown() already holding the OCC mutex and hwmon_device_unregister() waiting on the sysfs side: WARNING: possible circular locking dependency detected ... (sysfs_lock) ... at: hwmon_device_unregister+0x12/0x30 [vuln_msv] ... (&test_occ.lock) ... at: occ_shutdown.constprop.0+0xe/0x40 [vuln_msv] occ_update_response.isra.0+0xb/0x20 [vuln_msv] occ_show_temp_1.constprop.0.isra.0+0x23/0x40 [vuln_msv] *** DEADLOCK *** Serialize hwmon registration and removal with a separate hwmon_lock. Under that lock, detach occ->hwmon and update occ->active while occ->lock is held so concurrent OCC state changes still see a stable state, then drop occ->lock before calling hwmon_device_unregister(). Remove the driver sysfs group before taking occ->lock in occ_shutdown(), so draining the driver attributes cannot wait while the OCC mutex is held. Also make OCC update callbacks return -ENODEV after deactivation, so callbacks that already passed sysfs active protection do not poll the hardware after teardown has detached the hwmon device.

Linux

In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: defer reset until cmd_mutex is unlocked vub300_cmndwork_thread() holds cmd_mutex while it sends a command and waits for the command response. If the response wait times out, __vub300_command_response() kills the command URBs and then synchronously resets the USB device through usb_reset_device(). That reset path re-enters the driver through vub300_pre_reset(), which also takes cmd_mutex. The worker therefore tries to acquire the same mutex recursively while it is still holding it from the command path. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the real worker and timeout/reset carrier: vub300_cmndwork_thread() __vub300_command_response() usb_lock_device_for_reset() usb_reset_device() vub300_pre_reset() Lockdep reported the same-task recursive acquisition on cmd_mutex: WARNING: possible recursive locking detected ... (&test_vub300.cmd_mutex) ... at: usb_reset_device... [vuln_msv] ... (&test_vub300.cmd_mutex) ... at: vub300_cmndwork_thread+0x12/0x20 [vuln_msv] Workqueue: vub300_cmd_wq vub300_cmndwork_thread [vuln_msv] *** DEADLOCK *** Return a flag from __vub300_command_response() when the timeout path needs a device reset, then perform the reset after vub300_cmndwork_thread() has cleared the in-flight command state and dropped cmd_mutex. The reset is still attempted before mmc_request_done(), preserving the existing request completion ordering while avoiding the recursive lock.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: dw_dp: Fix null-ptr-deref in dw_dp_remove() Attempting to access driver data in the platform driver ->remove() callback may lead to a null pointer dereference since there is no guaranty that the component ->bind() callback invoking platform_set_drvdata() was executed. A common scenario is when Rockchip DRM driver didn't manage to run component_bind_all() because of an (unrelated) error causing early return from rockchip_drm_bind(). Drop the unnecessary call to platform_get_drvdata() and, instead, reference the target device structure via platform_device.

Linux

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Guard management mailbox channel cleanup against NULL pointer The management mailbox channel cleanup helpers can be called from error handling paths when mgmt_chann has already been destroyed. Add NULL checks to xdna_mailbox_free_channel() and xdna_mailbox_stop_channel() so the cleanup path safely returns instead of dereferencing a NULL mailbox channel pointer.

Linux

In the Linux kernel, the following vulnerability has been resolved: soc: xilinx: Fix race condition in event registration The zynqmp_power driver registers handlers for suspend and subsystem restart events using register_event(). However, the work structures (zynqmp_pm_init_suspend_work and zynqmp_pm_init_restart_work) used by these handlers were allocated and initialized after the registration call. This created a race window where, if the firmware triggered an event immediately after registration but before allocation, the callback (suspend_event_callback or subsystem_restart_event_callback) would dereference a NULL pointer in work_pending(), leading to a crash. Fix this by allocating and initializing the work structures before registering the events.

Linux

In the Linux kernel, the following vulnerability has been resolved: soc: xilinx: Shutdown and free rx mailbox channel A mbox rx channel is requested using mbox_request_channel_byname() in probe. In remove callback, the rx mailbox channel is cleaned up when the rx_chan is NULL due to incorrect condition check. The mailbox channel is not shutdown and it can receive messages even after the device removal. This leads to use after free. Also the channel resources are not freed. Fix this by checking the rx_chan correctly.

Linux

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Treat zero-length cert chain as query for blob lengths When handling a PDH export, treat a zero-length userspace cert chain buffer as a request to query the length of the relevant blobs. Failure to account for the zero-length buffer trips a BUG_ON() when running with CONFIG_DEBUG_VIRTUAL=y due to trying to get the physical address of the ZERO_SIZE_PTR (returned by kzalloc() on the bogus allocation). kernel BUG at arch/x86/mm/physaddr.c:28 ! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 30 UID: 0 PID: 28580 Comm: syz.2.18 Kdump: loaded Tainted: G W 6.18.16-smp-DEV #1 NONE Tainted: [W]=WARN Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025 RIP: 0010:__phys_addr+0x16a/0x180 arch/x86/mm/physaddr.c:28 RSP: 0018:ffffc9008329fc80 EFLAGS: 00010293 RAX: ffffffff8179110a RBX: 0000778000000010 RCX: ffff8884e6992600 RDX: 0000000000000000 RSI: 0000000080000010 RDI: 0000778000000010 RBP: ffffc9008329fdf0 R08: 0000000000000dc0 R09: 00000000ffffffff R10: dffffc0000000000 R11: fffffbfff126d297 R12: dffffc0000000000 R13: 1ffff92010653fc8 R14: 0000000080000010 R15: dffffc0000000000 FS: 0000555556bec9c0(0000) GS:ffff88aa4ce1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd3159e7000 CR3: 00000004fbc44000 CR4: 0000000000350ef0 Call Trace: <TASK> [<ffffffff853d3869>] sev_ioctl_do_pdh_export+0x559/0x7a0 drivers/crypto/ccp/sev-dev.c:2308 [<ffffffff853d1fdd>] sev_ioctl+0x2cd/0x480 drivers/crypto/ccp/sev-dev.c:2556 [<ffffffff82549ebc>] vfs_ioctl fs/ioctl.c:52 [inline] [<ffffffff82549ebc>] __do_sys_ioctl fs/ioctl.c:598 [inline] [<ffffffff82549ebc>] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:584 [<ffffffff8630115f>] do_syscall_x64 arch/x86/entry/syscall_64.c:64 [inline] [<ffffffff8630115f>] do_syscall_64+0x9f/0xf40 arch/x86/entry/syscall_64.c:98 [<ffffffff81000136>] entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fd3158eac39 </TASK> Thankfully, the bug is benign outside of CONFIG_DEBUG_VIRTUAL=y as getting the physical address is just arithmetic, and the PSP errors out before trying to write to the garbage address (which it must, otherwise querying the blob lengths would clobber memory at pfn=0).

Linux

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp/sev-dev-tsm - bail out early when pdev->bus is NULL dsm_create() initially checks pdev->bus when computing segment_id: u8 segment_id = pdev->bus ? pci_domain_nr(pdev->bus) : 0; But the next two lines unconditionally dereference pdev->bus via pcie_find_root_port() and especially pci_dev_id(pdev), which expands to PCI_DEVID(dev->bus->number, dev->devfn). If pdev->bus is in fact NULL, segment_id is initialised to 0 but the very next statement crashes the kernel. smatch flags this: drivers/crypto/ccp/sev-dev-tsm.c:253 dsm_create() error: we previously assumed 'pdev->bus' could be null (see line 251) Make the NULL handling consistent: if pdev->bus is NULL the device has no PCI context to work with and SEV TIO setup cannot proceed, so return -ENODEV before any of the bus-dependent lookups. The remaining initialisation now runs only on the path where pdev->bus is known to be valid. No change for callers where pdev->bus is non-NULL, which is the only case where dsm_create() did meaningful work before this change.

Linux

In the Linux kernel, the following vulnerability has been resolved: media: atomisp: gc2235: fix UAF and memory leak gc2235_probe() handles its error paths incorrectly. If media_entity_pads_init() fails, gc2235_remove() is called, which tears down the subdev and frees dev, but then still falls through to atomisp_register_i2c_module(). This results in use-after-free. If atomisp_register_i2c_module() fails, the media entity and control handler are left initialized and dev is leaked. gc2235_remove() unconditionally calls media_entity_cleanup() and v4l2_ctrl_handler_free(), but these are not initialized at every error path in gc2235_probe(). Replace gc2235_remove() calls in the probe error paths with explicit unwind labels that free only the resources initialized at each point of failure, in reverse order of initialization.

Linux

In the Linux kernel, the following vulnerability has been resolved: pinctrl: spacemit: fix NULL check in spacemit_pin_set_config spacemit_pin_set_config() looks up the per-pin descriptor with spacemit_get_pin() then checks the wrong variable for failure: const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin); ... if (!pin) return -EINVAL; reg = spacemit_pin_to_reg(pctrl, spin->pin); pin is an unsigned int pin id, where 0 (GPIO_0 / gmac0_rxdv on K3) is a valid pin, so rejecting it here drops the PAD config write for the first pin of every group. On K3 Pico-ITX the GMAC RGMII group lists pin 0 as its first entry, so its drive-strength / bias configuration was silently ignored. The intended guard is against spacemit_get_pin() returning NULL when the pin id isn't in the SoC's pin table. Check spin instead, which both restores PAD setup for pin 0 and prevents a NULL deref on spin->pin.

Linux

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix warning in poll cq direct mode CQs allocated by ib_alloc_cq() always have a comp_handler. Though in direct mode this handler is never expected to be called, it is still called when the driver is reset, triggering the following WARN_ONCE(): Call trace: ib_cq_completion_direct+0x38/0x60 hns_roce_cq_completion+0x54/0x90 (hns_roce_hw_v2] hns_roce_handle_device_err+Ox1c8/0x340 [hns_roce_hw_v2] hns_roce_hw_v2_uninit_instance.constprop.0+0x34/0x70 [hns_roce_hw_v2] hns_roce_hw_v2_reset_notify+0xc4/0xe0 [hns_roce_hw_v2] hclge_notify_roce_client+0x60/0xbc [hclge] hclge_reset_rebuild+0x48/0x34c [hclge] hclge_reset_subtask+0xcc/0xec [hclge] hclge_reset_service_task+0x80/0x160 [hclge] hclge_service_task+0x50/0x80 (hclge] process_one_work+0x1cc/0x4d0 worker_thread+0x154/0x414 kthread+0x104/0x144 ret_from_fork+0x10/0x18

Linux

In the Linux kernel, the following vulnerability has been resolved: ocfs2: don't BUG_ON an invalid journal dinode [BUG] A fuzzed OCFS2 image can corrupt the current slot journal dinode while mount is still in progress. The mount path first reports the invalid journal block and then crashes in shutdown: kernel BUG at fs/ocfs2/journal.c:1034! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ocfs2_journal_toggle_dirty+0x2d6/0x340 fs/ocfs2/journal.c:1034 Call Trace: ocfs2_journal_shutdown+0x414/0xc30 fs/ocfs2/journal.c:1116 ocfs2_mount_volume fs/ocfs2/super.c:1785 [inline] ocfs2_fill_super+0x30a9/0x3cd0 fs/ocfs2/super.c:1083 get_tree_bdev_flags+0x38b/0x640 fs/super.c:1698 get_tree_bdev+0x24/0x40 fs/super.c:1721 ocfs2_get_tree+0x21/0x30 fs/ocfs2/super.c:1184 vfs_get_tree+0x9a/0x370 fs/super.c:1758 fc_mount fs/namespace.c:1199 [inline] do_new_mount_fc fs/namespace.c:3642 [inline] do_new_mount fs/namespace.c:3718 [inline] path_mount+0x5b8/0x1ea0 fs/namespace.c:4028 do_mount fs/namespace.c:4041 [inline] __do_sys_mount fs/namespace.c:4229 [inline] __se_sys_mount fs/namespace.c:4206 [inline] __x64_sys_mount+0x282/0x320 fs/namespace.c:4206 ... [CAUSE] ocfs2_journal_toggle_dirty() used to return -EIO when journal->j_bh no longer contained a valid dinode, because the startup and shutdown paths already handled that failure. Commit 10995aa2451a ("ocfs2: Morph the haphazard OCFS2_IS_VALID_DINODE() checks.") changed the check to a BUG_ON() under the assumption that the journal dinode had already been validated. That turns an unexpected invalid journal dinode during mount teardown into a kernel crash instead of a normal mount failure. [FIX] Replace the BUG_ON() with WARN_ON() and return -EIO. This keeps the invariant warning for debugging, but restores the original behavior of failing startup or shutdown cleanly instead of panicking the kernel.

Linux

In the Linux kernel, the following vulnerability has been resolved: EDAC/igen6: Fix call trace due to missing release() When unloading the igen6_edac driver, there is a call trace: Device '(null)' does not have a release() function, it is broken and must be fixed. See Documentation/core-api/kobject.rst. WARNING: drivers/base/core.c:2567 at device_release+0x84/0x90, CPU#5: rmmod/127209 ... RIP: 0010:device_release+0x84/0x90 Call Trace: <TASK> kobject_put+0x8c/0x220 put_device+0x17/0x30 igen6_unregister_mcis+0xa2/0xe0 [igen6_edac] igen6_remove+0x82/0xb0 [igen6_edac] ... Fix the call trace by providing empty release() functions for the memory controller devices.

Linux

In the Linux kernel, the following vulnerability has been resolved: liveupdate: Reference count incoming FLB data Increment the incoming FLB refcount in liveupdate_flb_get_incoming() so that the FLB structure cannot be freed while the caller is actively using it. Add an additional liveupdate_flb_put_incoming() function so the caller can explicitly indicate when it is done using the FLB data. During a Live Update, a subsystem might need to hold onto the incoming File-Lifecycle-Bound (FLB) data for an extended period, such as during device enumeration. Incrementing the reference count guarantees that the data remains valid and accessible until the subsystem releases it, preventing future use-after-free bugs.

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: enable the right set of ciphers The firmware version number check for IGTK introduced in commit c34dbc5900b0 ("wifi: wlcore: Add support for IGTK key") lets the amount of ciphers decrease on every boot of a too old firmware and that is practically happening. It also does not take into account other chips than the wl18xx. On some wl128x, the following can be observed when connecting via nm to a common ap: [ 484.113311] wlcore: WARNING could not set keys [ 484.117828] wlcore: ERROR Could not add or replace key [ 484.123016] wlan0: failed to set key (5, ff:ff:ff:ff:ff:ff) to hardware (-5) [ 484.123046] wlcore: Hardware recovery in progress. FW ver: Rev 7.3.10.0.142 [ 484.139923] wlcore: pc: 0x0, hint_sts: 0x00000048 count: 1 [ 484.145721] wlcore: down [ 484.148986] ieee80211 phy0: Hardware restart was requested [ 484.610473] wlcore: firmware booted (Rev 7.3.10.0.142) [ 484.633758] wlcore: Association completed. [ 484.690490] wlcore: ERROR command execute failure 14 [ 484.690490] ------------[ cut here ]------------ [ 484.700195] WARNING: drivers/net/wireless/ti/wlcore/main.c:872 at wl12xx_queue_recovery_work+0x64/0x74 [wlcore], CPU#0: kworker/0:0/892 This repeats endlessly. Always disable IGTK on wl12xx and fix the decrementing mess.

Linux

In the Linux kernel, the following vulnerability has been resolved: cxl/fwctl: Fix __fortify_panic Fix a runtime assertion in cxlctl_get_supported_features(). Fortify complains that it is potentially overflowing the entries array per __counted_by_le(num_entries). Quiet the false positive by initializing @num_entries earlier. memcpy: detected buffer overflow: 48 byte write of buffer size 0 WARNING: lib/string_helpers.c:1036 at __fortify_report+0x4d/0xa0, CPU#7: fwctl/1398 RIP: 0010:__fortify_report+0x50/0xa0 Call Trace: __fortify_panic+0xd/0xf cxlctl_get_supported_features.cold+0x23/0x35 [cxl_core]

Linux

In the Linux kernel, the following vulnerability has been resolved: cxl/test: Fix __fortify_panic Fix a runtime assertion in setup_xor_mapping(). Fortify complains that it is potentially overflowing the xormaps array per __counted_by(nr_maps). Quiet the false positive by initializing @nr_maps earlier. memcpy: detected buffer overflow: 32 byte write of buffer size 0 WARNING: lib/string_helpers.c:1036 at __fortify_report+0x4d/0xa0, CPU#8: modprobe/2728 Call Trace: __fortify_panic+0xd/0xf setup_xor_mapping+0x6c/0xa0 [cxl_translate] [ dj: Fixed up @nr_entries to @nr_maps in commit log. ]

Linux

In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: revert ct extension genid infrastructure This infrastructure is not used anymore after moving ct timeout and helper to use datapath refcount to track object use. Revert commit c56716c69ce1 ("netfilter: extensions: introduce extension genid count") this patch disables all ct extensions (leading to NULL) for unconfirmed conntracks, when this is only targeted at ct helper and ct timeout. There is also codebase that dereferences the ct extension without checking for NULL which could lead to crash.

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Fix NULL pointer dereference in mt7996_init_tx_queues() When MT76_NPU and CONFIG_NET_MEDIATEK_SOC_WED are enabled and mt76 detects properly the Airoha NPU SoC, mt7996_init_tx_queues() will dereference a NULL WED pointer. Fix the issue by always passing the WED pointer from mt7996_dma_init().

Linux

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: npc: Fix size of entry2cntr_map KASAN prints below splat. This is caused by allocating counter for reserved mcam entry for cpt 2nd pass entry. But mcam->entry2cntr_map is not allocated for reserved entries. BUG: KASAN: slab-out-of-bounds in npc_map_mcam_entry_and_cntr+0xb0/0x1a0 Write of size 2 at addr ffff0001033e7ffe by task kworker/0:1/14 CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 6.1.67 #1 Hardware name: Marvell CN106XX board (DT) Workqueue: events work_for_cpu_fn Call trace: dump_backtrace.part.0+0xe4/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x88/0xb4 print_report+0x154/0x458 kasan_report+0xb8/0x194 __asan_store2+0x7c/0xa0 npc_map_mcam_entry_and_cntr+0xb0/0x1a0 rvu_mbox_handler_npc_mcam_write_entry+0x268/0x280 npc_install_flow+0x840/0xfe0 rvu_npc_install_cpt_pass2_entry+0x138/0x190 rvu_nix_init+0x148c/0x2880 rvu_probe+0x1800/0x30b0 local_pci_probe+0x78/0xe0 work_for_cpu_fn+0x30/0x50 process_one_work+0x4cc/0x97c worker_thread+0x360/0x630 kthread+0x1a0/0x1b0 ret_from_fork+0x10/0x20

Linux

In the Linux kernel, the following vulnerability has been resolved: MIPS: mm: Fix out-of-bounds write in maar_res_walk() maar_res_walk() uses wi->num_cfg as the index into the fixed-size wi->cfg array, but checks whether the array is full only after it has filled the selected entry. If walk_system_ram_range() reports more than 16 memory ranges, the overflow call writes one struct maar_config past the end of the array before WARN_ON() prevents num_cfg from advancing. Move the full-array check before taking the array slot and return non-zero when the scratch array is full, so walk_system_ram_range() terminates the walk instead of invoking the callback for further ranges.

Linux

In the Linux kernel, the following vulnerability has been resolved: powerpc/perf: fix preempt count underflow in fsl_emb_pmu_del fsl_emb_pmu_del() unconditionally calls put_cpu_var(cpu_hw_events) at the 'out:' label, but only calls the matching get_cpu_var() after the 'i < 0' early-return check. When event->hw.idx is negative the function jumps to 'out:' without having taken get_cpu_var(), and the trailing put_cpu_var() then issues an unmatched preempt_enable(), underflowing preempt_count. On a CONFIG_PREEMPT=y kernel preempt_count would underflow and eventually present as a 'scheduling while atomic' BUG. Move put_cpu_var() to pair with get_cpu_var() so the percpu access is correctly bracketed and the 'out:' label only handles perf_pmu_enable.

Linux

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix memory leak of bonding resources In a corner case of concurrent driver removal and driver reset, bonding resource is first released in hns_roce_hw_v2_exit() during driver removal, and then is allocated again in hns_roce_register_device() during driver reset. This leads to memory leak because the release timing has already passed. This may also lead to a kernel panic as below because of the leaked notifier callback: Call trace: 0xffffa20fccc04978 (P) raw_notifier_call_chain+0x20/0x38 call_netdevice_notifiers_info+0x60/0xb8 netdev_lower_state_changed+0x4c/0xb8 As Sashiko suggested, the teardown order of bonding resources should be inverted to make sure the resources are released when the driver is removed.

Linux

In the Linux kernel, the following vulnerability has been resolved: mfd: cs42l43: Sanity check firmware size Currently the code checks if a firmware was received, however it does not verify that the firmware size is larger than the firmware header. As the firmware pointer is dereferenced as a pointer to the header structure this could lead to an out of bounds memory access. Add the missing check.

Linux

In the Linux kernel, the following vulnerability has been resolved: coresight: ete: Always save state on power down System register ETMs and ETE are unlikely to be preserved on CPU power down. The ETE DT binding also never documented "arm,coresight-loses-context-with-cpu" so nobody would have legitimately been able to use that binding to fix it and ACPI has no such binding at all. Fix it by hard coding the setting for sysreg ETMs (ETE is always sysreg) or ACPI boots. Use a local variable when setting up save_state so that it's immune to concurrent probing when devices have different configurations which is an issue with modifying the global. This fixes the following error when using Coresight with ACPI on the FVP which supports CPU PM: coresight ete0: External agent took claim tag WARNING: drivers/hwtracing/coresight/coresight-core.c:248 at coresight_disclaim_device_unlocked+0xe0/0xe8, CPU#0: perf/117

Linux

In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: Avoid dwc_pcie_rasdes_debugfs_deinit() NULL dereference when no RAS DES capability dwc_pcie_rasdes_debugfs_init() returns success when the controller has no RAS DES capability, leaving pci->debugfs->rasdes_info unset. The common debugfs teardown path still calls dwc_pcie_rasdes_debugfs_deinit(), which dereferences rasdes_info unconditionally. Return early when no RAS DES state was allocated. In that case no RAS DES mutex was initialized, so there is nothing to destroy. [mani: reworded subject]

Linux

In the Linux kernel, the following vulnerability has been resolved: Revert "PCI/MSI: Unmap MSI-X region on error" This reverts commit 1a8d4c6ecb4c81261bcdf13556abd4a958eca202. Commit 1a8d4c6ecb4c ("PCI/MSI: Unmap MSI-X region on error") added an iounmap(dev->msix_base) on the error path of msix_capability_init() to release the MSI-X region when msix_setup_interrupts() fails. When msix_setup_interrupts() fails, the call chain is: msix_setup_interrupts() -> __msix_setup_interrupts() struct pci_dev *dev __free(free_msi_irqs) = __dev; ... return ret; // __free cleanup fires on error The __free(free_msi_irqs) cleanup calls pci_free_msi_irqs(), which already handles the unmap: void pci_free_msi_irqs(struct pci_dev *dev) { pci_msi_teardown_msi_irqs(dev); if (dev->msix_base) { iounmap(dev->msix_base); // already unmapped here dev->msix_base = NULL; // and set to NULL } } So dev->msix_base is unmapped and set to NULL before msix_setup_interrupts() returns to msix_capability_init(). The "goto out_unmap" introduced by commit 1a8d4c6ecb4c ("PCI/MSI: Unmap MSI-X region on error") then calls iounmap() a second time on a NULL pointer. This was reproduced on Intel Emerald Rapids (192 CPUs) while running tools/testing/selftests/kexec/test_kexec_jump.sh: WARNING: CPU#44 at iounmap+0x2a/0xe0 RIP: 0010:iounmap+0x2a/0xe0 RDI: 0000000000000000 Call Trace: msix_capability_init+0x317/0x3f0 __pci_enable_msix_range+0x21d/0x2c0 pci_alloc_irq_vectors_affinity+0xa9/0x130 nvme_setup_io_queues+0x2a8/0x420 [nvme] nvme_reset_work+0x151/0x340 [nvme] ... RDI=0 confirms iounmap() is called with NULL. Restore the original "goto out_disable" and leave the unmap to the existing __free(free_msi_irqs) cleanup.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Avoid double-unpin of DOORBELL/MMIO BOs on free amdgpu_amdkfd_gpuvm_free_memory_of_gpu() unpinned DOORBELL and MMIO remap BOs (which are pinned at allocation time) before checking whether the BO is still mapped to the GPU. When the BO is still mapped, the function returns -EBUSY and leaves the BO alive, but it has already been unpinned. The BO is then unpinned again when it is finally freed during process teardown, triggering a ttm_bo_unpin() underflow warning: WARNING: CPU: 18 PID: 15066 at ttm/ttm_bo.c:650 amdttm_bo_unpin+0x6d/0x80 [amdttm] Workqueue: kfd_process_wq kfd_process_wq_release [amdgpu] RIP: 0010:amdttm_bo_unpin+0x6d/0x80 [amdttm] Call Trace: amdgpu_bo_unpin+0x1a/0x90 [amdgpu] amdgpu_amdkfd_gpuvm_unpin_bo+0x31/0xb0 [amdgpu] amdgpu_amdkfd_gpuvm_free_memory_of_gpu+0x3bf/0x460 [amdgpu] kfd_process_free_outstanding_kfd_bos+0xd4/0x170 [amdgpu] kfd_process_wq_release+0x109/0x1b0 [amdgpu] process_one_work+0x1e2/0x3b0 worker_thread+0x50/0x3a0 kthread+0xdd/0x100 ret_from_fork+0x29/0x50 Move the unpin after the mapped_to_gpu_memory check so it only happens once we are committed to freeing the BO. (cherry picked from commit 927c5b2defb9b09856444d94bebfd056a002bd75)

Linux

In the Linux kernel, the following vulnerability has been resolved: ieee802154: Avoid calling WARN_ON() on -ENOMEM in cfg802154_switch_netns() It's pointless to call WARN_ON() in case of an allocation failure in dev_change_net_namespace() and device_rename(), since it only leads to useless splats caused by deliberate fault injections, so avoid it. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Linux

In the Linux kernel, the following vulnerability has been resolved: ACPI: processor_idle: Mark LPI enter functions as __cpuidle When function tracing or Kprobes is enabled, entering an ACPI Low Power Idle (LPI) state triggers the following RCU splat: RCU not on for: acpi_idle_lpi_enter+0x4/0xd8 WARNING: CPU: 8 PID: 0 at include/linux/trace_recursion.h:162 function_trace_call+0x1e8/0x228 The acpi_idle_lpi_enter() function is invoked within the cpuidle path after RCU has already been disabled for the current local CPU. Consequently, ftrace's function_trace_call() expects RCU to be actively watching before recording trace data, emitting a warning if it is not. Fix this by annotating acpi_idle_lpi_enter(), the generic __weak stub, and the RISC-V implementation of acpi_processor_ffh_lpi_enter() with __cpuidle. This moves these functions into the '.cpuidle.text' section, implicitly disabling ftrace instrumentation (notrace) along this sensitive path and preventing trace-induced RCU warnings during idle entry.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: enetc: fix potential divide-by-zero when num_vsi is zero For i.MX94 series, all the standalone ENETCs do not support SR-IOV, so pf->caps.num_vsi is zero. This leads to a divide-by-zero in enetc4_default_rings_allocation() when distributing rings among PF and VFs. Division by zero is undefined behavior in C. On ARM64, the UDIV/SDIV instructions silently return zero rather than raising an exception, so the issue does not cause a visible crash. However, relying on this behavior is incorrect and poses a cross-platform compatibility risk. Add an explicit check for num_vsi == 0 and return early after the PF's rings have been configured.

Linux

In the Linux kernel, the following vulnerability has been resolved: tracing/probes: Remove WARN_ON_ONCE from parse_btf_arg Sashiko found that user can cause this WARN_ON_ONCE() easily with adding a kprobe event based on a raw address with BTF parameter. Since this is not an unexpected condition, remove the WARN_ON_ONCE().

Linux

In the Linux kernel, the following vulnerability has been resolved: HID: picolcd: prevent NULL pointer dereference in picolcd_send_and_wait() In picolcd_send_and_wait(), an integer overflow of the signed loop counter 'k' can theoretically lead to a NULL pointer dereference of 'raw_data'. If the loop executes more than INT_MAX times, 'k' becomes negative, making the condition 'k < size' true even when 'size' is 0. Change the type of 'k' to 'unsigned int' to prevent the overflow and eliminate the out-of-bounds access. Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool. [jkosina@suse.com: extended hash length]

Linux

In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd/lbr: Fix kernel address leakage A user-only branch stack can contain branches that originate from the kernel. As a result, kernel addresses are exposed to user space even when PERF_SAMPLE_BRANCH_USER is requested. On AMD processors supporting X86_FEATURE_AMD_LBR_V2, perf can still report SYSRET/ERET entries for which the branch-from addresses are in the kernel. E.g. $ perf record -e cycles -o - -j any,save_type,u -- \ perf bench syscall basic --loop 1000 | \ perf script -i - -F brstack|tr ' ' '\n'| \ grep -E '0x[89a-f][0-9a-f]{15}' ... 0xffffffff81001268/0x717a90a38f1a/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a39157/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a2c628/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a41b60/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a260db/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a260db/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a8bef1c30/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a8e4d3c90/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH ... The reason is that the hardware filter only considers the privilege level applicable to the branch target. Extend software filtering to also validate the branch-from addresses against br_sel, so that any branch record whose branch-from address is in the kernel is dropped when PERF_SAMPLE_BRANCH_USER is requested.