Mercredi 26 août 2026

In AntFlow V2.0.0, ActivitiTest.java enables users to execute JUEL expressions without filtering the user input, which leads to a command execution vulnerability.

JeecgBoot v3.9.2 is vulnerable to Remote command execution. The CodeNode component of the AI Flow module supports Groovy script execution. While the `SecurityCheck` class employs a blacklist mechanism to intercept dangerous calls, the dynamic nature of Groovy allows this blacklist to be completely bypassed through string concatenation and reflection.

A zero-click remote code execution (RCE) vulnerability in the /Terminal/Notification.hs component of SimpleX Chat before v6.5 allows attackers to execute arbitrary commands in the context of the application without user interaction via sending a crafted payload in a text message.

An issue was discovered in openRISC OR1200 commit 83ac6b. A mismatch between the RTL and netlist can lead to unexpected behavior.

The report module in the backend of smart-web2 v1.3.1 is vulnerable to arbitrary SQL execution. The sqlResource.sql parameter is stored in the t_report_sql_resource table through the ReportController.save() interface and directly embedded into Hibernate native queries without any parameterization or filtering.

In DocSys-master V2.02.85, the uploadMarkdownPic interface in src/com/DocSystem/controller/DocController.java has an arbitrary file upload vulnerability:

The front-end interface /cms/category/list of MCMS <=6.2.0 is vulnerable to SQL injection. The size parameter is directly concatenated into the LIMIT clause of SQL through FreeMarker ${size} without being parameterized and bound. The built-in SqlInjectionUtil employs regular expression blacklist filtering, yet keywords like CREATE/TABLE/SET/PREPARE/EXECUTE are not included in the list, allowing for bypassing. Attackers can execute stacked SQL statements without logging in.

Gitea · Gitea gitea

Gitea before 1.27.1 allows remote code execution via the diffpatch API through Git hook installation.

Stomper 5e2741e is vulnerable to Use-After-Free. When a client sends multiple CONNECT frames on the same TCP connection, and subsequently another client (or a later connection) sends SEND frames to a destination previously subscribed on that connection, the broker may dereference a pointer to a StompStreamSocket object that has already been freed. This results in a heap use-after-free and process crash. Because the protocol does not authenticate or restrict such sequences by default.

An issue was discovered in Denx U-Boot before 2026.04. An integer overflow vulnerability exists in function ext4fs_get_bgdtable, the size calculation can lead to under allocation and this underallocated buffer will be used in memcpy() which could lead to arbitrary code execution, a denial of service, or other unspecified impacts.

An issue was discovered in Denx U-Boot before 2026.04. An integer overflow vulnerability in the ZFS filesystem support can be triggered by malformed on-disk metadata. The issue may result in incorrect memory allocation followed by out-of-bounds memory access, potentially leading to a crash or arbitrary code execution during the boot process.

DWSurvey v6.14.0 is is vulnerable to authentication bypass via the '/api/dwsurvey/none/' and '/api/dwsurvey/up/**' parameters.

Dell Cloud Disaster Recovery

Dell Cloud Disaster Recovery, versions 20.2 and prior, contain an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution.

An issue in TokTok qTox v1.18.4 allows a local attacker to cause a denial of service via the src/persistence/serialize.cpp component

Google Cloud Vertex AI Search for Commerce

A Predictable Resource Name vulnerability in BigQuery Import Staging in Google Cloud Vertex AI Search for Commerce versions prior to 2026-04-27 on Google Cloud Platform allows an attacker knowing the victim's project number to obtain read/write access to staged data and error logs using predictable bucket names. This vulnerability was patched and no customer action is needed.

An arbitrary file upload vulnerability in the /v1/my_drive/batch_upload component of cohere North AI v1.1.5 allows attackers to exeute arbitrary code via uploading a crafted file.

Cohere North AI v1.1.5 was discovered to contain excessively permissive cross-domain policy with untrusted domains. This occurs via the server failing to validate the Origin header of incoming connection requests.

Spring Cloud Config · Vmware spring cloud config

Missing Authentication for Critical Function vulnerability in Spring Spring Cloud Config allows Webhook requests to Spring Cloud Config Server's /monitor endpoint are not validated. This issue affects Spring Cloud Config: from 5.0.0 through 5.0.4, from 4.3.0 through 4.3.4, from 4.0.0 through 4.2.8, and through 3.1.14.

Bird Home Automation GmbH D1101V-F 000140 is vulnerable to Incorrect Access Control via the Key derivation process, password validation process.

vesoft-inc nebula

NebulaGraph exposes its runtime configuration over an unauthenticated HTTP service. Each daemon starts the web service defined in src/webservice/WebService.cpp, whose bind address defaults to all interfaces, and registers routes for reading and writing gflags alongside status and statistics. Neither the service nor its router carries any authentication, token check or address restriction. The read route returns the daemon's full set of runtime flag values, which includes the configured certificate, key and certificate-authority paths, the password file path, data directories and the transport-security enable flags. The write route parses a supplied map and applies each entry through the gflags runtime setter, so a caller able to reach the port can change the daemon's behaviour without restarting it, including disabling the transport-security flags, redirecting log files and altering flags such as failed_login_attempts and password_lock_time_in_secs. Public reports of this endpoint describe a single name, enable_authorize, being refused by the handler; at release 3.8.0 that refusal is not present and the handler applies every name it is given.

ILIAS-eLearning e.V. ILIAS

ILIAS before versions 9.22, 10.10, and 11.3 contains an unauthenticated PHP object injection vulnerability that allows unauthenticated attackers to execute arbitrary code by injecting serialized objects through the LTI authentication endpoint and triggering deserialization via the Shibboleth back-channel logout endpoint. Attackers can write arbitrary serialized objects into session storage, then exploit an available POP gadget through the logout endpoint's unrestricted deserialization to write attacker-controlled PHP content to a web-accessible path and achieve remote code execution as the web server user.

senaite.core

SENAITE.CORE is the core framework for the SENAITE laboratory information management system. From 2.0.0 to 2.6.0, the SENAITE.CORE JSON API permits unauthenticated remote code execution through a two-request chain involving missing authorization and unsafe evaluation. The state-changing routes in src/bika/lims/jsonapi/update.py, including update, update_many, remove, doActionFor, doActionFor_many, and getusers, do not enforce the senaite.core: Access JSON API permission before resolving attacker-selected objects. In src/bika/lims/jsonapi/init.py, set_fields_from_request passes raw request values for RecordsField and RecordField instances to eval() before field mutator write-permission checks execute. An anonymous attacker can discover the bika_setup object identifier through @@uuid, send a value such as RejectionReasons to /@@API/update, and execute arbitrary Python in the Zope worker before a later mutation failure rolls back ZODB changes. The same unsafe evaluation pattern is present in src/senaite/core/browser/fields/record.py and src/senaite/core/browser/fields/records.py. Successful exploitation can expose or modify laboratory data, files, and accounts and can disrupt the service.

Linux

In the Linux kernel, the following vulnerability has been resolved: block: stop the timeout timer when releasing a never added disk disk_release() undoes blk_mq_init_allocated_queue() for a disk whose probe failed before add_disk(), but it only calls blk_mq_exit_queue(). Nothing there stops q->timeout, and that timer rolls forward: it stays pending until it next expires, not until the last request completes. So if the driver issued any I/O before adding the disk, the request_queue is freed while still linked into a timer wheel bucket. Commit 6f8191fdf41d ("block: simplify disk shutdown") dropped the blk_cleanup_queue() call that used to stop it. __del_gendisk() and blk_mq_destroy_queue() still do; only the probe failure path lost it. nvme gets there because nvme_update_ns_info() submits Report Zones or FDP io-mgmt-recv on ns->queue before the disk is added, so a later failure - a concurrent reset setting NVME_CTRL_FROZEN, or device_add_disk() failing - lands in put_disk() with the timer armed: BUG: KASAN: slab-use-after-free in detach_if_pending+0x30c/0x340 Write of size 8 at addr ffff888004d71310 by task kworker/u8:2/37 __timer_delete_sync+0x156/0x240 kernel/time/timer.c:1621 blk_sync_queue+0x22/0x40 block/blk-core.c:222 nvme_sync_queues+0x100/0x150 drivers/nvme/host/core.c:5362 nvme_reset_work+0x138/0x930 drivers/nvme/host/pci.c:3264 Allocated by task 34: __blk_mq_alloc_disk+0x33/0x100 block/blk-mq.c:4462 nvme_alloc_ns+0x290/0x3870 drivers/nvme/host/core.c:4146 Freed by task 0: blk_free_queue_rcu+0x3a/0x50 block/blk-core.c:254 rcu_core+0xc10/0x1730 kernel/rcu/tree.c:2857 The queue being synced there is ctrl->admin_q, only a victim sharing a timer wheel bucket with the freed queue's dangling entry; other runs tripped in enqueue_timer(), __run_timers() or blk_mq_timeout_work(). Failing nvme_alloc_ns() with a debug patch makes it deterministic: one leaked timer trips KASAN within seconds, while 1987 patched releases produced no splat. Stop the timer and the queue work items before blk_mq_exit_queue(), like blk_mq_destroy_queue() does. Found by FuzzNvme.

Linux

In the Linux kernel, the following vulnerability has been resolved: mptcp: avoid combining some incoming suboptions Some MPTCP suboptions are mutually exclusive according to the RFC8684, but also because in different places, the code doesn't expect some combinations to be present. That's specially true for suboptions that would be present twice, but with different attributes. The new restrictions are the same as the ones applied on the output side, with mptcp_write_options. The same rules can be reused with a small fix: an MP_FASTCLOSE can be used with a DSS when the sender picks this option [1], which is not the case on Linux. Here are the rules: Which options can be used together? X: mutually exclusive O: often used together C: can be used together in some cases P: could be used together but we prefer not to (optimisations) | Opt: | MPC | MPJ | DSS | ADD | RM | PRIO | FAIL | FC | |------|------|------|------|------|------|------|------|------| | MPC |------|------|------|------|------|------|------|------| | MPJ | X |------|------|------|------|------|------|------| | DSS | X | X |------|------|------|------|------|------| | ADD | X | X | P |------|------|------|------|------| | RM | C | C | C | P |------|------|------|------| | PRIO | X | C | C | C | C |------|------|------| | FAIL | X | X | C | X | X | X |------|------| | FC | X | X | P | X | X | X | X |------| | RST | X | X | X | X | X | X | O | O | |------|------|------|------|------|------|------|------|------| The only difference is with the 'P': another stack could send and ADD_ADDR with other suboptions (DSS, RM_ADDR), and this should be allowed. A few points of attention: - In theory, an MP_CAPABLE could be used with a RM_ADDR, but there is no reason to add it with a SYN. Note that even with a 4th ACK, it doesn't seem to be useful, except when IDs are known in advance via another channel. Better not to break that. - Now, combining both an MP_CAPABLE and an MP_JOIN will no longer result to a reject of the two options, but only the second suboption is ignored. That seems OK to do that for this unexpected error. At least now all inconsistent combinations are handled the same way. This could change later in next. This also means the explicit checks for having both MPC + MPJ in subflow.c will now be unreachable. That's fine, they will be removed in a follow-up patch. - In case of conflicting combinations, the extra suboption(s) is/are ignored: having such combinations either means the remote peer is buggy, or is evil. The simplest action is then taken in this case: stop processing the current suboption. - In mp_opt->suboptions, there is also a bit reserved to the checksum, which can be used in an MP_CAPABLE and a DSS. Each time a DSS option can be used in parallel with another option, the checksum can be set, so the verification is combined into a new OPTIONS_MPTCP_DSS macro. - An MP_CAPABLE ACK can carry a Data-Level Length, and an optional Checksum: they are the same as the ones found in a DSS, because a DSS cannot be used in parallel to an MP_CAPABLE. Similarly, even if there is room, a DSS cannot be used with an MP_JOIN.

Linux

In the Linux kernel, the following vulnerability has been resolved: mptcp: options: reset DSS fields in case of unexpected size A remote peer could send a malformed DSS with a wrong size, followed by another DSS or MPC + Data. In this case, the first suboption will be ignored, but leaving some fields written, which could lead to inconsistency or access uninitialized data. Explicitly reset the fields that could have been modified in case of unexpected size.

Linux

In the Linux kernel, the following vulnerability has been resolved: mptcp: fastopen: only mark MPTFO subflows with SYN data Passive TCP Fast Open accepts a valid-cookie SYN even when it carries no data. In that case the child socket's receive queue is intentionally left empty. mptcp_fastopen_subflow_synack_set_params() set is_mptfo before checking for queued SYN data. That made data-less TFO SYNs hit a WARN and, if the warning was non-fatal, left stale MPTFO state behind. The stale flag could later trigger a state-confusion bug in check_fully_established(). Only mark the subflow as MPTFO after confirming that an SKB was queued. Return quietly when the receive queue is empty. Note that mptcp_subflow_context's is_mptfo field is now not just about subflows where the TFO was present, but about MPTFO subflow that consumed SYN data. Only having a valid cookie but not carrying data is not really "doing TFO".

Linux

In the Linux kernel, the following vulnerability has been resolved: libceph: fix multiple unsafe decodes in decode_locker() decode_locker() in cls_lock_client.c contains three unsafe decode operations that allow a malicious or compromised OSD to trigger slab-out-of-bounds reads: 1. ceph_decode_copy() at the locker_id_t name field has no preceding bounds check. With p == end after ceph_start_decoding() accepts struct_len=0, this reads sizeof(ceph_entity_name) = 9 bytes past the validated buffer boundary. 2. *p += sizeof(struct ceph_timespec) after the locker_info_t header is an unchecked pointer advance. A malicious OSD can position p past end, causing all subsequent _safe checks to pass against a bogus boundary. 3. len = ceph_decode_32(p) has no preceding bounds check, and the immediately following *p += len is uncapped. A malicious OSD can send len=0xffffffff, advancing p gigabytes past end and escaping the decode window entirely. Fix all three by replacing bare operations with their safe variants: ceph_decode_copy -> ceph_decode_copy_safe *p += sizeof(...) -> ceph_decode_skip_n ceph_decode_32(p) -> ceph_decode_32_safe *p += len -> ceph_decode_skip_n A new label is added to return -EINVAL on any bounds violation. -EINVAL is appropriate here: the data received from the OSD is structurally malformed, which is an invalid argument to the decode contract regardless of whether the caller or the wire is at fault. Attacker model: a malicious or compromised OSD in a multi-tenant Ceph deployment can trigger this against any kernel client that issues the lock.get_info class method (e.g. during RBD exclusive lock acquisition) without any further privileges beyond OSD session establishment. [ idryomov: use ceph_decode_skip_string() to skip description, trim changelog ]

Linux

In the Linux kernel, the following vulnerability has been resolved: libceph: Avoid using invalid osd indices from primary_temp A corrupted osdmap received from a Ceph monitor or OSD may contain osd indices in its pg_temp, primary_temp, pg_upmap, and pg_upmap_items parts that don't exist, i.e., that are greater than max_osd or smaller than CEPH_HOMELESS_OSD (-1). These indices are used to create the up and acting set in ceph_pg_to_up_acting_osds(), called from calc_target(). While most of these osd indices are checked, the one from primary_temp is not. Subsequently, this may lead to calc_target() returning this (potentially invalid) index as target osd for a (linger) request. Because the osd_state, osd_weight, and osd_addr arrays only contain max_osd entries (with indices 0 to max_osd -1), this leads to out-of-bounds accesses when trying to read values from these arrays. This patch fixes the issue by adding a check to get_temp_osds(), so that only valid osd indices from primary_temp are used, and it falls back to using the primary from pg_temp or the up set if it is invalid. [ idryomov: changelog ]

Linux

In the Linux kernel, the following vulnerability has been resolved: libceph: fix OOB read in decode_watchers() via missing bounds check ceph_start_decoding() validates that struct_len bytes remain in the buffer after the encoding header, but accepts struct_len=0 as valid: ceph_decode_need(p, end, 0, bad) always passes. When a malicious or compromised OSD sends an obj_list_watch_response_t reply with struct_len=0, ceph_start_decoding() returns success with p == end, leaving zero bytes guaranteed for subsequent reads. The immediately following ceph_decode_32(p) in decode_watchers() has no preceding bounds check. With p == end this is a 4-byte read past the validated buffer boundary. The garbage value is then passed directly to kzalloc_objs() as the watcher count. The sibling function decode_watcher() already uses the safe variants (ceph_decode_copy_safe, ceph_decode_64_safe, ceph_decode_skip_32) after its own ceph_start_decoding() call. decode_watchers() is the only site that uses the bare variant, confirming an oversight. Fix by replacing ceph_decode_32(p) with ceph_decode_32_safe(p, end, *num_watchers, bad), consistent with the established pattern. Attacker model: a malicious or compromised OSD in a multi-tenant Ceph deployment (e.g. cloud) can trigger this against any kernel client that calls CEPH_OSD_OP_LIST_WATCHERS, without any further privileges beyond OSD session establishment. [ idryomov: trim changelog ]

Linux

In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Limit the number of channel program segments The processing of channel programs, and the CCWs within them, is done recursively. As such, there is an arbitrary (but not architectural) limit to the number of CCWs that can exist in a single channel program. The vfio-ccw logic breaks these channel programs into segments whenever it encounters a Transfer-In-Channel (TIC) CCW, and the combined number of segments count towards the global limit. Impose an equivalent limit to the number of segments until such logic can be made non-recursive.

Linux

In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Ensure first IDAW remains constant The first IDAW in a list does not need to be on a 2K/4K boundary like all others, and so is read separately to accurately calculate the size of the buffer needed to read the full IDAL. Verify that the address found in the first IDAW is unchanged between reads, to ensure a consistent set of IDAWs being worked with.

Linux

In the Linux kernel, the following vulnerability has been resolved: ceph: avoid fs reclaim while using current->journal_info handle_reply() stores a `ceph_mds_request` pointer in `current->journal_info` while filling the inode and dentry cache from an MDS reply. An allocation in this section can enter direct reclaim and prune dentries from another filesystem. If this dirties an ext4 inode, ext4 starts a JBD2 transaction. JBD2 interprets the Ceph request in `current->journal_info` as a journal handle and dereferences the request's `r_tid` as `h_transaction`, causing a kernel crash, e.g.: Unable to handle kernel paging request at virtual address 00000000077b4818 [...] Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 6 UID: 0 PID: 2699135 Comm: kworker/6:3 Tainted: G W 6.18.38-i3 #1113 NONE [...] Workqueue: ceph-msgr ceph_con_workfn pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : jbd2__journal_start+0x2c/0x208 lr : __ext4_journal_start_sb+0x100/0x178 [...] Call trace: jbd2__journal_start+0x2c/0x208 (P) __ext4_journal_start_sb+0x100/0x178 ext4_dirty_inode+0x3c/0x90 __mark_inode_dirty+0x58/0x400 iput.part.0+0x2b0/0x370 iput+0x18/0x30 dentry_unlink_inode+0xc0/0x158 __dentry_kill+0x80/0x250 shrink_dentry_list+0x90/0x130 prune_dcache_sb+0x60/0x98 super_cache_scan+0xe8/0x190 do_shrink_slab+0x174/0x388 shrink_slab+0xd8/0x4c0 shrink_node+0x31c/0x908 do_try_to_free_pages+0xd0/0x508 try_to_free_pages+0x11c/0x238 __alloc_frozen_pages_noprof+0x4d0/0xdd0 __folio_alloc_noprof+0x18/0x70 __filemap_get_folio+0x248/0x440 ceph_readdir_prepopulate+0x570/0x9e8 mds_dispatch+0x1424/0x1ba0 ceph_con_process_message+0x74/0xa0 ceph_con_v1_try_read+0x3a0/0x1510 ceph_con_workfn+0x260/0x460 Enter a scoped NOFS allocation context and leave it after clearing `journal_info`. This prevents filesystem reclaim from recursing into another filesystem while the field contains Ceph-private data.

Linux

In the Linux kernel, the following vulnerability has been resolved: ovpn: finish crypto callback cleanup before peer release Crypto completion callbacks hold both key-slot and peer references. The peer reference pins the netdev, and dropping the last peer reference can let netdev unregistration and module removal make progress. Do not release that peer reference before the callback has finished its own cleanup. If ovpn_crypto_key_slot_put runs after ovpn_peer_put, it can schedule an RCU callback backed by module text after ovpn_cleanup rcu_barrier has already run. The TX error path also freed the remaining skb after ovpn_peer_put, leaving callback cleanup outside the peer/netdev lifetime window. Release the key slot and free any remaining skb first, then drop the peer reference as the last callback action.

Google langfun

Improper Neutralization of Directives in Dynamically Evaluated Code ('Eval Injection') in the default lf.query Python protocol in Google langfun versions prior to 0.1.2 allows remote unauthenticated attackers to execute arbitrary Python code in the context of the host application via crafted prompt inputs that cause the model to generate executable Python expressions evaluated without a sandbox.

Linux

In the Linux kernel, the following vulnerability has been resolved: sctp: validate cookie AUTH state before use When cookie authentication is disabled, COOKIE_ECHO restores fixed-size AUTH fields directly from peer-controlled cookie bytes. A forged RANDOM length, HMAC list, or CHUNKS list can then reach association consumers with lengths or identifiers that were never validated against the local backing arrays. A forged RANDOM length can cause out-of-bounds reads during key-vector construction. A forged HMAC identifier also caused a 32-byte write past a zero-length AUTH chunk, providing a primitive for a local privilege escalation chain. Validate the cookie's RANDOM, HMACS, and CHUNKS parameters at the cookie trust boundary before copying them into the association. Reject invalid types, malformed lengths, unsupported HMAC identifiers, HMAC lists without SHA1, and forbidden chunk ids.

Linux

In the Linux kernel, the following vulnerability has been resolved: riscv: lib: Fix ZBB strnlen reading past count boundary The ZBB-optimized strnlen loop loads one word ahead before checking the aligned boundary: REG_L t1, SZREG(t0) // load next word addi t0, t0, SZREG // advance orc.b t1, t1 bgeu t0, t4, 4f // boundary check AFTER load where t4 = (s + count) & -SZREG. When s is aligned and count is a multiple of SZREG, t4 equals s + count and the loop loads a full word starting at exactly s + count. If s + count falls on a page boundary with the next page unmapped, this faults. Fix by computing the aligned boundary from the last valid byte (s + count - 1) instead of s + count. This makes the loop stop at the word containing the last valid byte rather than potentially loading the word after it. The count == 0 case is already handled by the beqz early exit. Also add a pre-loop guard (bgeu t0, t4) for the case where all valid bytes fit within the first word. With the adjusted boundary, t4 can equal t0, and entering the loop with stale register state from the first-word processing would produce incorrect results. The final minu clamp ensures the result is still correct when the last loaded word extends past s + count - 1 within the same aligned word.

Linux

In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: publish GC-visible tuple last nf_flow_table_iterate() only treats original-direction tuple nodes as owning entries. Publishing the original node first lets GC observe and free a flow while flow_offload_add() is still inserting the reply node. Publish the reply node first and the original node last so GC never sees a partially installed flow. KASAN can trigger slab-use-after-free read and write reports in the flowtable/rhashtable path (rht_deferred_worker, jhash, flow_offload_del, flow_offload_lookup, etc.).

Linux

In the Linux kernel, the following vulnerability has been resolved: ipvlan: inherit needed_headroom and needed_tailroom from phy_dev ipvlan devices inherit hard_header_len from phy_dev during ipvlan_init(), but leave needed_headroom and needed_tailroom set to 0. When the underlying phy_dev (or stacked lower device) requires extra headroom or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx headroom), upper layers calculating packet headroom and tailroom fail to reserve sufficient space. This can result in reallocation overhead, skb headroom underflows, or KASAN slab-use-after-free crashes when dev_hard_header() / ipvlan_hard_header() prepends header data or when lower devices append tailroom. Fix this by: 1. Inheriting needed_headroom and needed_tailroom from phy_dev in ipvlan_init(). 2. Propagating needed_headroom and needed_tailroom updates to attached ipvlans in ipvlan_device_event() when receiving NETDEV_FEAT_CHANGE events.

Linux

In the Linux kernel, the following vulnerability has been resolved: macvlan: inherit needed_headroom and needed_tailroom from lowerdev macvlan devices inherit hard_header_len from lowerdev during macvlan_init(), but leave needed_headroom and needed_tailroom set to 0. When the underlying lowerdev requires extra headroom or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx headroom), upper layers calculating packet headroom and tailroom fail to reserve sufficient space. This can result in reallocation overhead, skb headroom underflows, or KASAN slab-use-after-free crashes when dev_hard_header() / macvlan_hard_header() prepends header data or when lower devices append tailroom. Fix this by: 1. Inheriting needed_headroom and needed_tailroom from lowerdev in macvlan_init(). 2. Propagating needed_headroom and needed_tailroom updates to attached macvlans in macvlan_device_event() when receiving NETDEV_FEAT_CHANGE events.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw-nuss: Fix port_id extraction from SRC TAG On the packet reception path, the ID of the MAC Port on which the packet was received, is embedded in the RX DMA Descriptor's metadata. The ID is extracted using the helper function cppi5_desc_get_tags_ids() which fills in the 16-bit Source Tag into the 'port_id' variable. However, it is only the lower 8-bits of the 16-bit Source Tag that represent the MAC Port ID, while the upper 8-bits are Hardware-Reserved and carry an arbitrary value. With the existing logic, sporadic kernel crash is observed due to the subsequent driver code accessing out-of-bound memory because of an invalid port_id. Hence, fix the port_id extraction logic to use only the lower 8-bits of the Source Tag as the MAC Port ID.

kyverno

Kyverno is a policy engine designed for cloud native platform engineering teams. From 1.18.0 until 1.18.2, the NamespacedMutatingPolicy CEL compiler exposes the generator library to matchConditions, allowing a namespace-scoped policy to invoke generator.apply(namespace, resources) with an arbitrary target namespace. The validation in pkg/cel/policies/mpol/validate.go checks that the policy compiles but does not enforce namespace scope, and GenerateResources in pkg/cel/libs/context.go does not reject the cross-namespace target. A user who can create NamespacedMutatingPolicy objects in one namespace can cause the admission controller, operating with cluster-wide privileges, to create ConfigMaps, NetworkPolicies, Secrets, RoleBindings, and other resources in another namespace, enabling unauthorized modification and potential privilege escalation. This issue is fixed in version 1.18.2.

TÜBİTAK BİLGEM Software Technologies Research Institute Liderahenk

Use of Hard-coded Credentials vulnerability in TÜBİTAK BİLGEM Software Technologies Research Institute Liderahenk allows Try Common or Default Usernames and Passwords. This issue affects Liderahenk: before 3.5.5.

Google Cloud BigQuery Data Transfer Service

An Improper Input Validation vulnerability in CData JDBC driver integration in Google Cloud BigQuery Data Transfer Service versions prior to 2026-05-01 on Google Cloud Platform allows an authenticated attacker to achieve remote code execution in the connector container and escalate privileges in the tenant project using crafted JDBC connection string parameters. This vulnerability was patched on 1 May 2026, and no customer action is needed.

getgrav grav

The getgrav/grav-plugin-api plugin before 1.0.18 does not enforce API-key scope in the requireNotSuperTarget() function in UsersController.php across seven sensitive user-management endpoints. The check uses isSuperAdmin() on the acting account rather than verifying whether the specific API key carries super authority (via isSuperWithinScope()). As a result, an API key scoped below full super authority but belonging to a super-admin account can act against other super-admin accounts—disabling their 2FA, deleting their avatar, minting new API keys under their identity, or deleting their existing API keys.

Ubiquiti Inc UniFi Protect AI Key

A malicious actor with access to the network could exploit an Improper Access Control vulnerability found in UniFi Protect AI Key to escalate privileges on the device.

Ubiquiti Inc UniFi Talk Application

A malicious actor with access to the network could exploit an Improper Input Validation vulnerability found in UniFi Talk Application to execute a Command Injection on the host device.

Ubiquiti Inc UniFi Access Application

A malicious actor with access to the network and low privileges could exploit an Improper Access Control vulnerability found in UniFi Access Application to escalate privileges on the host device.

Ubiquiti Inc UniFi Enterprise Audio/Video Bridge

A malicious actor with access to the network could exploit an Improper Input Validation vulnerability found in UniFi Enterprise Audio/Video Bridge to execute a Command Injection on the device.

Ubiquiti Inc UniFi Connect Display Cast Pro

A malicious actor with access to the network and under certain conditions could exploit an Improper Access Control vulnerability found in UniFi Connect Display Cast Pro to escalate privileges on the device.

Ubiquiti Inc UniFi OS Server · Ubiquiti Inc Cloud Keys · Ubiquiti Inc Network Video Recorders · Ubiquiti Inc Enterprise Network Video Recorders

A malicious actor with access to the network could exploit an Improper Neutralization of CRLF Sequences vulnerability found in certain devices running UniFi OS to bypass authentication to such UniFi OS devices or instances.

Ubiquiti Inc UniFi OS Server · Ubiquiti Inc Cloud Keys · Ubiquiti Inc Network Video Recorders · Ubiquiti Inc Enterprise Network Video Recorders

A malicious actor with access to the network and under certain conditions could exploit an Improper Neutralization of CRLF Sequences vulnerability found in certain devices running UniFi OS to bypass authentication to such UniFi OS devices or instances.

Ubiquiti Inc UniFi Protect Application

A malicious actor with access to the network and low privileges could exploit an Improper Input Validation vulnerability found in UniFi Protect Application to execute a Command Injection on the host device.

Ubiquiti Inc UniFi Access Application

A malicious actor with access to the network and low privileges could exploit an Improper Input Validation vulnerability found in UniFi Access Application to execute a Command Injection on the host device.

Ubiquiti Inc UniFi Access Application

A malicious actor with access to the network and low privileges could exploit an Improper Input Validation vulnerability found in UniFi Access Application to execute a Command Injection on the host device.

wedevs ERP: Complete HR, Accounting & CRM Suite Built for WooCommerce

The ERP: Complete HR, Accounting & CRM Suite Built for WooCommerce plugin for WordPress is vulnerable to Unrestricted File Type Upload in all versions up to, and including, 1.17.8 via the save_attachments() function. This is due to missing file extension validation and missing path normalization when CRM Email Connect processes inbound IMAP email attachments. This makes it possible for unauthenticated attackers to send a crafted email to the site's configured inbound mailbox with a forged References header matching the plugin's expected pattern and an attachment filename such as `../helper.php`, causing the cron-based IMAP sync job to write attacker-controlled PHP outside of the .htaccess-protected `crm-attachments` directory and into `wp-content/uploads/`. On configurations where PHP executes in uploads, this can lead to remote code execution. Exploitation requires the CRM module and IMAP Email Connect feature to be enabled and configured.

TarsCloud TarsWeb

TarsWeb decides whether a request comes from a trusted local caller using a client-controlled header. app.js sets Koa's proxy option to true without naming which upstream proxies may be trusted and without limiting the number of forwarded hops, so the request address Koa reports is taken from the X-Forwarded-For header supplied by the caller. In midware/ssoMidware.js a single branch covers both the ignored-path list and the ignoreIps allowlist from config/loginConf.js, which contains the loopback address, and that branch assigns the effective account identity from the uid query parameter before falling through to the request without validating any ticket, cookie or password. A request carrying a forged X-Forwarded-For value naming the loopback address and a uid naming an existing account therefore reaches every route the console mounts as that account, including an administrator, with no credential of any kind. Those routes include user and role administration, service configuration, and package upload and deployment. Version 3.0.16 separates the two branches so that a match on the address allowlist assigns the configured default account rather than one named by the caller.

Ubiquiti Inc UniFi OS Server · Ubiquiti Inc Cloud Keys · Ubiquiti Inc Network Video Recorders · Ubiquiti Inc Enterprise Network Video Recorders

A malicious actor with access to the network, low privileges and under certain conditions could exploit an Active Debug Code vulnerability found in certain devices running UniFi OS to escalate privileges within such UniFi OS devices or instances.

Ubiquiti Inc UniFi Access Application

A malicious actor with access to the network and low privileges could exploit an Improper Input Validation vulnerability found in UniFi Access Application to execute a Command Injection on the host device.

Ubiquiti Inc UID Enterprise Agent

A malicious actor with access to the network and high privileges could exploit an Improper Input Validation vulnerability found in UID Enterprise Agent to execute a Command Injection on the host device.

Ubiquiti Inc UniFi Network Application

A malicious actor with access to the network and high privileges could exploit an Improper Access Control vulnerability found in UniFi Network Application to escalate privileges within the UniFi Network Application.

Ubiquiti Inc UniFi OS Server

A malicious actor with access to the network and high privileges could exploit an Improper Input Validation vulnerability found in UniFi OS Server to execute a Command Injection on the host device.

Ubiquiti Inc UniFi OS Server

A malicious actor with access to the network and high privileges could exploit an Improper Input Validation vulnerability found in UniFi OS Server to execute a Command Injection on the host device.

Ubiquiti Inc UniFi Protect Application

A malicious actor with access to the network could exploit an Improper Input Validation vulnerability found in UniFi Protect Application to execute a Command Injection on the host device.

Ubiquiti Inc UniFi OS Server · Ubiquiti Inc Cloud Keys · Ubiquiti Inc Network Video Recorders · Ubiquiti Inc Enterprise Network Video Recorders

A malicious actor with access to the network and low privileges could exploit an Improper Access Control vulnerability found in certain devices running UniFi OS to escalate privileges within such UniFi OS devices or instances.

Ubiquiti Inc UniFi Network Application

A malicious actor with access to the network and high privileges could exploit an Improper Input Validation vulnerability found in UniFi Network Application to execute a Command Injection on an adopted device.

Ubiquiti Inc UniFi OS Server · Ubiquiti Inc Cloud Keys · Ubiquiti Inc Network Video Recorders · Ubiquiti Inc Enterprise Network Video Recorders

A malicious actor with access to the network and low privileges could exploit an Improper Access Control vulnerability found in certain devices running UniFi OS to escalate privileges within such UniFi OS devices or instances.

CalcProgrammer1 OpenRGB

The OpenRGB network protocol allows to write attacker controlled strings into arbitrary file system paths (extension of CVE-2026-59682). This allows either a full system compromise from local or remote (if the daemon is running as root) or a full account takeover (if the daemon is running in user context).

CalcProgrammer1 OpenRGB

Arbitrary file overwrite via SAVE_PROFILE message in OpenRGB. This issue affects OpenRGB through 1.0rc3.

Thinking Software Technology EFence

EFence developed by Thinking Software Technology has an Arbitrary File Upload vulnerability. Unauthenticated remote attackers can upload and execute web shell backdoors, thereby enabling arbitrary code execution on the server.

Ubiquiti Inc UniFi Protect Application

A malicious actor with access to the network and low privileges could exploit an Improper Input Validation vulnerability found in UniFi Protect Application to execute a Command Injection on the host device.

NLnet Labs NSD · Nlnetlabs nsd

When ranges are used for access control (i.e. of the form 1.2.3.4-1.2.3.25), because NSD wrongly compares the IP address with the range on little endian systems, IPs that were meant to be allowed may be denied, and, IPs that were meant to be denied access could be allowed. An IPv4 address is compared with IPv4 ranges as unsigned 32 bit numbers directly with the endianness of the host, but the values to compare are in network byte order (big-endian). With IPv6 addresses the comparison is done in 4 times a unsigned 32 bit number comparison, again with the endianness of the host where all values are actually in network bye order.

themefusion Avada (Fusion) Builder · ThemeFusion Avada | Website Builder For WordPress & WooCommerce

The Avada theme for WordPress is vulnerable to Arbitrary File Write in all versions up to, and including, 7.16 when the Fusion Builder plugin is installed and active in versions up to, and including, 3.16. This is due to a chain of authorization and input validation weaknesses across the two components that makes it possible for unauthenticated attackers to write attacker-controlled files to the server. This can be used to create and execute arbitrary PHP files, resulting in remote code execution and complete site compromise. Successful exploitation requires both Avada and Fusion Builder to be installed and active, as well as certain administrator-authored content to be present.

Danfoss iC7-Automation SP · Danfoss iC7-Marine · Danfoss iC7-Hybrid

Improper access control in debug and engineering interfaces in Danfoss iC7-Automation SP, iC7-Marine, and iC7-Hybrid GR3 allows attackers to gain read/write access to internal values, upload and execute unsigned applications, and upload unsigned EEPROM data and firmware via exposed service interfaces and software update mechanisms

cozmoslabs TranslatePress – Translate Multilingual sites with AI Translation

The TranslatePress – Translate Multilingual sites with AI Translation plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 3.3.1 via the 'trp_get_translations_regular' AJAX action. This makes it possible for unauthenticated attackers to extract the raw administrator password-reset URL — including the plaintext reset key and login parameters stored in the translation dictionary table — enabling full administrator account takeover. This vulnerability is only exploitable when automatic string saving is enabled (the default setting) and the target administrator's profile locale is set to a published secondary language, as these conditions cause the password-reset URL to be persisted as a translatable string in the secondary-language dictionary table.

MacWarrior clipbucket-v5

ClipBucket V5's web installer fails to properly validate or escape the php_cli_filepath parameter before passing it to shell execution. Unauthenticated attackers can submit a crafted POST request to the installer with a malicious php_cli_filepath value to execute arbitrary commands as the web server user.

TOTOLINK N600R

A security vulnerability has been detected in TOTOLINK N600R 4.3.0cu.7647_B20210106. The affected element is the function setSystemConfig of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument Hostname leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used.

Drupal PhotoSwipe - Responsive JavaScript Modal Image Gallery

Missing Authorization vulnerability in Drupal PhotoSwipe - Responsive JavaScript Modal Image Gallery allows Forceful Browsing. This issue affects PhotoSwipe - Responsive JavaScript Modal Image Gallery versions: from 0.0.0 to 3.2.0.

Drupal Webform REST

Incorrect Authorization vulnerability in Drupal Webform REST allows Forceful Browsing. This issue affects Webform REST versions: from 0.0.0 to 4.1.0.

Drupal Commerce Elavon

Vulnerability in Drupal Commerce Elavon. This issue affects Commerce Elavon versions: *.*.

Drupal Internationalization Single Sign-On

Authentication Bypass Using an Alternate Path or Channel vulnerability in Drupal Internationalization Single Sign-On allows Authentication Bypass. This issue affects Internationalization Single Sign-On versions: from 0.0.0 to 1.8.0.

Punk::Plugin::TOTP versions before 0.05 for Perl allow the second-factor attempt limit to be reset by replaying an earlier session cookie because the challenge route counts failures in the session. The POST handler on challenge_path keeps the failure count as tries inside the totp_pending record in the session, raising it on each rejected code and deleting the pending record once it reaches attempts, five by default. Punk::Session carries the session in a signed cookie unless the application declares a store, and keeps no server-side record, so an earlier value of the same session stays valid until the expiry stamped inside it. A client that saves the cookie before its failed attempts and presents it again gets the pending record back with its counter, and the limit never fires. The replayed record is accepted while its own expiry, pending_ttl seconds from the challenge and 300 by default, has not passed. Sessions declared with a store are not affected: the pending record and its counter then live server-side. The attempt limit does not bound guessing of the second factor, which is left to the per-address rate limit the plugin registers on the same path, 30 requests per 60 seconds.

Punk::Plugin::TOTP versions before 0.05 for Perl accept another account's recovery code at the two-factor challenge because totp_use_recovery compares user identifiers numerically. The helper searches the recovery model for the submitted code's digest alone, across every user's rows, so the ownership test that follows is the only thing binding a code to the account it was issued to. That test compares the row's user_id with the challenged user's id through Perl's integer coercion, and an identifier with no leading digits coerces to zero, so any two of them compare equal. User models keyed on a username, an email address or a UUID hit that case, and a numeric key compares as intended. The challenge route feeds a submitted value to the helper once TOTP verification fails, so an attacker who knows a victim's password and holds a recovery code of their own passes the victim's second factor.

Apache Software Foundation Apache Tomcat · Apache tomcat

Incorrect Authorization vulnerability in Apache Tomcat's FORM authentication process allows the bypassing of a security constraint that limits user has access to a resource POST but not GET. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.0.M1 through 9.0.120. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fixes the issue.

Apache Software Foundation Apache Tomcat · Apache tomcat

Authentication Bypass by Capture-replay vulnerability in Apache Tomcat's DIGEST authenticator. If, before windowSize requests have been made, a client makes a DIGEST authenticated request with a nonceCount on the upper boundary of the replay window then that request is replayable once only while the associated nonceCount remains within the replay window.   This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.0.M1 through 9.0.120. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.30 through 7.0.109. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue.

Apache Software Foundation Apache Tomcat · Apache tomcat

Improper Input Validation vulnerability in Apache Tomcat due to incomplete fix for CVE-2026-32990. This issue affects Apache Tomcat: from 11.0.20 through 11.0.24, from 10.1.53 through 10.1.57, from 9.0.115 through 9.0.120. Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue.

Apache Software Foundation Apache Tomcat · Apache tomcat

Improper Access Control, Incorrect Authorization vulnerability in Apache Tomcat leads to security constraint bypass if a constraint for a longer path is specified before a more restrictive constraint for a shorter sub-path. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.0.M1 through 9.0.120, from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Users are recommended to upgrade to version 11.0.25, 10.1.58, 9.0.121, which fixes the issue.

baptisteArno typebot.io

Typebot is an open-source chatbot builder. In self-hosted versions up to and including 3.17.1, the default passwordless email magic-link authentication is vulnerable to login-code brute forcing that leads to account takeover. The email provider overrides NextAuth's default cryptographically secure token with a 6-digit code generated using Math.random(), reducing the keyspace to 900,000 with a 10-minute expiry, and the code itself is the raw value placed in the magic link. The verification callback enforces no attempt limit, lockout, or CSRF protection, and an incorrect guess does not consume the real code because the adapter returns null on a not-found token, so a valid code survives unlimited guessing within its lifetime. The only rate limiter applies to the code-sending path and is keyed on the client-controlled X-Forwarded-For header, allowing an attacker to request many concurrent live codes for one victim and further raise the odds of a matching guess. As a result, an anonymous attacker who knows a victim's email address can brute-force the callback and obtain an authenticated session as that user with no victim interaction, gaining full access to the victim's bots, results, and connected integration credentials. Deployments configured for OAuth or SSO only, with no email provider, are not affected. This issue is fixed in version 3.18.0