Veille CVE

Mercredi 26 août 2026

17 CVE

Critique 3 Élevée 7 Moyenne 6 Faible 1 Non évaluée 0 Exploitées (KEV) Tri : plus récentes « git » ✕
  1. CVE-2026-77652 7.8 Élevée

    GNOME Dia

    A heap-based buffer overflow vulnerability exists in the Dia diagram editor WPG file format importer. In plug-ins/wpg/wpg-import.c, the WPG import renderer allocates a fixed palette with: ren->pPal = g_new0(WPGColorRGB, 256); When handling a WPG_COLORMAP record, the parser reads a start index (i16) and number of colors (iNum16) from the file and reads palette data with: bRet &= (iNum16 == (int)fread(&ren->pPal[i16], sizeof(WPGColorRGB), iNum16, f)); The only bounds-related check is `if (i16 >= 0 && i16 <= iSize)`, where iSize is the WPG record size—not the palette capacity. There is no validation that i16 is less than 256 or that i16 + iNum16 does not exceed 256. A malicious WPG file can supply i16=256 and iNum16=264. That causes fread() to write 792 bytes starting at &pPal[256], while the palette buffer is only 768 bytes (256 entries × 3 bytes). This overflows into adjacent heap metadata and can crash Dia (SIGABRT / malloc corruption errors) or, depending on heap layout and exploit primitives, potentially lead to arbitrary code execution. Exploitation requires convincing a user to open a crafted WPG file via Dia's file dialog, command line, or file association. No special privileges are required to deliver the file to the victim. Affected component: WPG parser (plug-ins/wpg/wpg-import.c). Affected versions: all Dia versions containing this code path (reporter tested Dia 0.98+git20260221-1; issue present on upstream master as of 2026-08-21).

  2. CVE-2026-60004 9.8 Critique Exploitée

    Gitea · Gitea gitea

    Gitea before 1.27.1 allows remote code execution via the diffpatch API through Git hook installation.

  3. CVE-2026-74742 7.5 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: veth: fix queue index used to wake the peer txq in veth_poll veth_poll() derives the index of the peer TX queue to wake from rq->xdp_rxq.queue_index. That field is only initialized by xdp_rxq_info_reg() in veth_enable_xdp_range(), which runs only when an XDP program is attached. On the plain GRO/NAPI path (veth_napi_enable_range()) xdp_rxq_info_reg() is never called, so queue_index stays 0 for every queue, as priv->rq is zero-allocated. So in a multi-queue setup with GRO enabled and no XDP program attached, every NAPI instance looks at the peer's TX queue 0. If veth_xmit() stops peer TX queue 1 because the ptr_ring is full (NETDEV_TX_BUSY), nothing ever wakes it again: the poller draining queue 1 wakes queue 0 instead. veth implements no ndo_tx_timeout, so the netdev watchdog does not kick in either, and the queue stays stopped indefinitely. Derive the index from the position of the rq within priv->rq instead, which is correct regardless of whether XDP was ever enabled. Scripts to reproduce the stall are available at https://github.com/netoptimizer/veth-backpressure-performance-testing

  4. CVE-2026-7487 3.5 Faible

    GitLab · Gitlab gitlab

    GitLab has remediated an issue in GitLab EE affecting all versions from 13.1 before 19.1.7, 19.2 before 19.2.5, and 19.3 before 19.3.1 that, under certain conditions, an authenticated user with reporter-role permissions who authored a merge request could have reset merge request approval rules due to improper authorization checks.

  5. CVE-2026-77801 6.5 Moyenne

    GitLab · Gitlab gitlab

    GitLab has remediated an issue in GitLab CE/EE affecting all versions from 12.8 before 19.1.7, 19.2 before 19.2.5, and 19.3 before 19.3.1 that, under certain conditions, could have allowed an authenticated user to cause a denial of service affecting background job processing, due to missing object count limits.

  6. CVE-2026-3035 5.5 Moyenne

    GitLab · Gitlab gitlab

    GitLab has remediated an issue in GitLab EE affecting all versions from 11.3 before 19.1.7, 19.2 before 19.2.5, and 19.3 before 19.3.1 that, under certain conditions, an authenticated user with project Maintainer permissions could have accessed the terminal of a protected environment they were not authorized to use due to improper authorization checks.

  7. CVE-2026-18252 8.1 Élevée

    GitLab · Gitlab gitlab

    GitLab has remediated an issue in GitLab EE affecting all versions from 18.9 before 19.1.7, 19.2 before 19.2.5, and 19.3 before 19.3.1 that, under certain conditions, an authenticated user with developer-role permissions could have executed arbitrary commands in a CI context, due to the Claude agent processing configuration from a user-controlled source.

  8. CVE-2026-15387 4.3 Moyenne

    GitLab · Gitlab gitlab

    GitLab has remediated an issue in GitLab EE affecting all versions from 19.1 before 19.1.7, 19.2 before 19.2.5, and 19.3 before 19.3.1 that, under certain conditions, an authenticated user with developer-role permissions could have influenced the execution environment of Pipeline Execution Policy enforcement jobs, due to improper handling of job dependencies.

  9. CVE-2025-10903 6.5 Moyenne

    GitLab · Gitlab gitlab

    GitLab has remediated an issue in GitLab EE affecting all versions from 11.10 before 19.1.7, 19.2 before 19.2.5, and 19.3 before 19.3.1 that, under certain conditions, an authenticated user could have caused denial of service, due to an unbounded loop triggered by specially crafted input in the SCIM user provisioning feature.

  10. CVE-2026-77658 7.8 Élevée

    GNOME Dia

    A stack-based buffer overflow vulnerability exists in the Dia diagram editor when processing Network Bus objects from Dia XML project files. In objects/network/bus.c, bus_load() reads the number of bus handles from the file attribute "bus_handles" using attribute_num_data() without validating an upper bound: bus->num_handles = attribute_num_data(attr); When a bus handle is subsequently moved, bus_handle_moved() allocates two temporary arrays on the stack: parallel = (real *)g_alloca(num_handles * sizeof(real)); perp = (real *)g_alloca(num_handles * sizeof(real)); Because num_handles is fully attacker-controlled via the project file, sufficiently large values (for example 262144 or higher) cause g_alloca() to consume more stack space than the default thread stack limit (typically 8 MB on Linux), resulting in stack overflow, SIGSEGV, and potential stack frame / return-address corruption. An attacker can embed a Bus object with an excessive bus_handles count in a malicious .dia file. Exploitation requires the victim to open the file in Dia (file dialog, command line, or file association) and trigger handle manipulation (moving a bus handle), which exercises the vulnerable code path. The identical g_alloca pattern is present in objects/Misc/tree.c (copied from bus.c) and is likely vulnerable to the same class of attack via Tree objects. Affected versions: Dia 0.98.0 and earlier versions containing this code; issue confirmed on upstream master as of 2026-08-21. Upstream report: https://gitlab.gnome.org/GNOME/dia/-/issues/581

  11. CVE-2026-9668 6.3 Moyenne

    ZTE SCP

    With legitimate user credentials in hand, attackers can construct malicious SQL statements to bypass authentication logic and execute arbitrary database queries directly. This will consequently lead to slow database queries and expanded query coverage. This vulnerability features a low exploitation threshold, wide scope of impact, requires no external privilege escalation, and is classified as a high-priority fix.

  12. CVE-2026-80196 7.5 Élevée

    kimai

    Kimai before 2.58.0 contains an authentication bypass vulnerability where password reset links remain valid after password changes because the LoginLink signature covers only the user id, not the password hash. Attackers who intercept or cache a password reset link can use it up to 2 additional times within a 1-hour window to log in as the user even after the legitimate user has changed their password.

  13. CVE-2026-73335 4.6 Moyenne

    Digital Agency Android App "Myna Point"

    Android application "Myna Point" is vulnerable to Improper Authorization in Handler for Custom URL Scheme (CWE-939). A malicious application installed on the user's Android device may exploit the affected application's functionality through an Intent, potentially allowing arbitrary JavaScript to be executed within the affected application.

  14. CVE-2026-29988 7.6 Élevée

    Milesight AM102/102L V2 · Milesight AM103/103L V2 · Milesight AM304L · Milesight AM305L

    A cleartext transmission of sensitive information vulnerability in the NFC interface of multiple Milesight IoT device models running affected firmware versions allows an unauthenticated attacker with physical proximity to retrieve LoRaWAN ABP NwkSKey and AppSKey values and D2D keys via an NFC read operation. The exposed keys can be used to decrypt LoRaWAN traffic, forge uplink and downlink frames, submit falsified sensor data, issue supported device commands, and cause subsequent legitimate frames to be rejected.

  15. CVE-2026-41707 7.4 Élevée

    Spring Security · Vmware spring security

    Authentication Bypass by Capture-replay vulnerability in Spring Spring Security allows Spring Security's DPoPProofJwtDecoderFactory contains a cache-based replay attack vulnerability. The internal cache storing JWT ID claims has a strict size limit, allowing attackers to evict legitimate entries by flooding the server with dummy requests, then replay intercepted valid DPoP proofs. This issue affects Spring Security: 7.1.0, from 7.0.0 through 7.0.6, and from 6.5.0 through 6.5.11.

  16. CVE-2026-78619 9.8 Critique

    Punk::Plugin::TOTP versions before 0.05 for Perl accept another account's recovery code at the two-factor challenge because totp_use_recovery compares user identifiers numerically. The helper searches the recovery model for the submitted code's digest alone, across every user's rows, so the ownership test that follows is the only thing binding a code to the account it was issued to. That test compares the row's user_id with the challenged user's id through Perl's integer coercion, and an identifier with no leading digits coerces to zero, so any two of them compare equal. User models keyed on a username, an email address or a UUID hit that case, and a numeric key compares as intended. The challenge route feeds a submitted value to the helper once TOTP verification fails, so an attacker who knows a victim's password and holds a recovery code of their own passes the victim's second factor.

  17. CVE-2026-62862 9.1 Critique

    baptisteArno typebot.io

    Typebot is an open-source chatbot builder. In self-hosted versions up to and including 3.17.1, the default passwordless email magic-link authentication is vulnerable to login-code brute forcing that leads to account takeover. The email provider overrides NextAuth's default cryptographically secure token with a 6-digit code generated using Math.random(), reducing the keyspace to 900,000 with a 10-minute expiry, and the code itself is the raw value placed in the magic link. The verification callback enforces no attempt limit, lockout, or CSRF protection, and an incorrect guess does not consume the real code because the adapter returns null on a not-found token, so a valid code survives unlimited guessing within its lifetime. The only rate limiter applies to the code-sending path and is keyed on the client-controlled X-Forwarded-For header, allowing an attacker to request many concurrent live codes for one victim and further raise the odds of a matching guess. As a result, an anonymous attacker who knows a victim's email address can brute-force the callback and obtain an authenticated session as that user with no victim interaction, gaining full access to the victim's bots, results, and connected integration credentials. Deployments configured for OAuth or SSO only, with no email provider, are not affected. This issue is fixed in version 3.18.0