Samedi 22 août 2026

zephyrproject zephyr

The Infineon Airoc Wi-Fi driver's transmit callback airoc_mgmt_send() in drivers/wifi/infineon/airoc_wifi.c allocates a net_buf from the fixed airoc_pool for every outbound packet. When whd_network_send_ethernet_data() returns a synchronous failure, the underlying WHD library does not take ownership of the buffer, but the pre-fix driver returned -EIO without releasing it. Each failed transmit therefore permanently leaks one buffer from the pool. airoc_pool is small and fixed (AIROC_WIFI_TX_PACKET_POOL_COUNT + AIROC_WIFI_RX_PACKET_POOL_COUNT, default 20 buffers) and is shared by WHD's whd_host_buffer_get callback for both transmit and receive. Once enough send failures have leaked the pool dry, airoc_wifi_host_buffer_get() returns WHD_BUFFER_ALLOC_FAIL for all subsequent allocations, so both transmit and the WHD-driven receive path fail and Wi-Fi connectivity is lost until the device is rebooted. The leak occurs only on the transmit error path. A Wi-Fi-adjacent attacker can influence the conditions that cause synchronous send failures (for example by deauthenticating/disassociating the station while the local stack continues to attempt transmits), and ordinary transient failures over the device's lifetime accumulate toward the same state. Reliable on-demand triggering is of high complexity and the impact is availability-only, but the resulting denial of service is permanent and non-recoverable without a reboot. The fix releases the buffer with airoc_wifi_buffer_release() on the failure branch, returning it to the pool. The commit also removes a redundant k_sem_give() in airoc_mgmt_disconnect(); because data->sema_common is a binary semaphore (limit 1) the duplicate give merely saturated at 1 and had no security impact.

fabrikar.com Fabrik extension for Joomla

Joomla Extension - fabrikar.com - Unauthenticated modification of any comment in Fabrik < 4.7.2 - The onUpdateComment endpoint did not perform any access checks.

fabrikar.com Fabrik extension for Joomla

Joomla Extension - fabrikar.com - Unauthenticated disclosure of any commenter's email address in Fabrik < 4.7.2 - The onGetEmail endpoint did not perform any access checks.

fabrikar.com Fabrik extension for Joomla

Joomla Extension - fabrikar.com - Unauthenticated row disclosure via form.inlineedit in Fabrik < 4.7.2 - The inineedit form controller does not perform any access checks, disclosing items to unauthorized users.

fabrikar.com Fabrik extension for Joomla

Joomla Extension - fabrikar.com - Unauthenticated row reordering in Fabrik < 4.7.2 - The order plugin did not perform any access checks.

fabrikar.com Fabrik extension for Joomla

Joomla Extension - fabrikar.com - Unauthenticated deletion of any comment in Fabrik < 4.7.2 - The DeleteComment endpoint did not perform any access checks.

nltk · Nltk nltk

NLTK versions before 3.9.4 contain a symlink escape vulnerability in CorpusReader.open() that allows local attackers to read arbitrary files outside the corpus root. The vulnerability exists because path validation is lexical and does not account for symlink resolution, enabling attackers to place symlinks inside the corpus root to access files outside the intended boundary.

hashcat

hashcat contains a heap-based buffer overflow (out-of-bounds write) in the outfile_write() function in src/outfile.c. When assembling output into a fixed-size buffer (HCBUFSIZ_LARGE, ~16 MB), the function sequentially appends the username, separator, hash, and plaintext via memcpy without validating that the accumulated length stays within the buffer capacity. When run with --username --show against a crafted hash file containing an oversized username that nearly fills the buffer, the total assembled output exceeds the buffer, causing a heap buffer overflow that can corrupt memory and crash the process.

hashcat

hashcat's fgetl() function in src/filehandling.c writes a null terminator one byte past the caller's buffer when an input line is exactly the buffer length. Attackers can trigger this out-of-bounds heap write by providing a hash file, potfile, or wordlist containing a line of exactly HCBUFSIZ_LARGE bytes.

nltk · Nltk nltk

NLTK versions before 3.10.0 contain a logic bug in FileSystemPathPointer.open() where the sandbox validation check compares a normalized path against itself, making the security check permanently inert. Attackers can pass file:// URLs to nltk.data.load() to read arbitrary files accessible to the process user, including credentials and configuration files.

nltk · Nltk nltk

NLTK before 3.10.0 (affected versions <= 3.9.4) contains a server-side request forgery (SSRF) vulnerability in the validate_network_url() function in nltk/pathsec.py. The _resolve_hostname() helper catches OSError and ValueError during socket.getaddrinfo() and returns an empty list; when DNS resolution fails, the validation loop executes no IP checks and the function fails open, allowing urlopen() to proceed without validation. An attacker who can trigger DNS resolution failures or use DNS rebinding can bypass SSRF protections and reach restricted network resources, including cloud metadata endpoints (e.g., 169.254.169.254).

nltk · Nltk nltk

nltk versions before 3.10.2 contain a symlink-based arbitrary file read vulnerability in IPIPANCorpusReader methods that bypass nltk.pathsec validation entirely. Attackers can place a symlink in the corpus root directory and read arbitrary files accessible to the process by calling channels(), domains(), categories(), or fileids() methods with the symlink filename.

wpsoul Greenshift – animation and page builder blocks

The GreenShift – Animation and Page Builder Blocks plugin for WordPress is vulnerable to unauthorized modification of data in versions up to, and including, 12.8.9. This is due to a missing capability check on the 'gspb_update_global_wp_settings' function that only verifies the 'edit_posts' capability instead of requiring administrative privileges. This makes it possible for authenticated attackers, with contributor-level access and above, to modify global WordPress theme color settings site-wide, leading to site defacement.

dvankooten MC4WP: Mailchimp for WordPress

The MC4WP: Mailchimp for WordPress plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the form response message post meta fields (e.g., 'text_subscribed', 'text_error') in all versions up to, and including, 4.12.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

wpchill Image Photo Gallery Final Tiles Grid

The Image Photo Gallery Final Tiles Grid plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'delay' shortcode attribute in all versions up to, and including, 3.6.12 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

pglombardo PasswordPusher

PasswordPusher versions v1.45.11 through v2.9.5 contain an improper authorization vulnerability in the push deletion logic. The ownership check compares @push.user against current_user; for an anonymously created push both values are nil, and Ruby evaluates nil == nil as true, so the check passes and the deletable_by_viewer restriction is never enforced. An attacker who knows only the secret URL can permanently delete an anonymous push even when the creator disabled viewer deletion and even without the passphrase. Only deployments that allow anonymous pushes (the default) are affected. The issue is fixed in v2.9.6.

openwrt luci

luci-lib-px5g (LuCI) contains a heap-based buffer overflow in the native ASN.1 encoding routine asn1_add_obj (x509write.c) when signing a certificate with a 2040-bit RSA key. For a 255-byte signature, the BIT STRING allocation is computed from the DER length encoding of 255 bytes, but the payload written after prepending the unused-bits byte is 256 bytes, requiring one additional DER length octet. As a result the allocation is 259 bytes while the tag, length, unused-bits byte, and signature require 260 bytes, and the final memcpy writes one byte beyond the heap buffer. The overflow is reachable through the exported Lua interface via create_selfsigned(); whether it is remotely exploitable depends on the embedding application. The vulnerable code is present on the openwrt-18.06 through openwrt-25.12 release branches and is absent from master, where the luci-lib-px5g package has been removed rather than patched.

siyuan-note siyuan

SiYuan versions before v3.7.4 fail to validate that packageName matches the downloaded package content in bazaar install endpoints. Attackers with same-origin access can overwrite existing trusted plugins by supplying mismatched packageName and repoURL parameters, achieving persistence across application restarts.

siyuan-note siyuan

SiYuan versions before v3.8.0 contain an incomplete path blocklist in the MCP file tool that fails to restrict access to sensitive workspace files protected by the HTTP API. Authenticated administrators can read plaintext publish-mode passwords from data/.siyuan/publishAccess.json and access other sensitive files like data/templates and data/snippets/conf.json.

siyuan-note siyuan

SiYuan before v3.8.0 interpolates secret placeholders into the destination URL parameter of the http_request MCP tool, allowing attackers to exfiltrate stored secrets. An MCP client can craft a request with an attacker-controlled URL containing secret placeholders to send plaintext secret values to any public host without confirmation.

WWBN AVideo

WWBN AVideo through commit 9c39d8c8b4c1f75540788d6b391740852ceb0732 contains an authorization bypass vulnerability in the Users_affiliations add.json.php endpoint that allows authenticated users to forge two-party consent records by supplying the counterparty's agreement timestamp. Attackers can create a forged affiliation with status='a' and then reassign video ownership to arbitrary users through the videoAddNew.json.php endpoint, which trusts the forged affiliation as an authorization term.

WWBN AVideo

WWBN AVideo through commit 9c39d8c8 contains a cross-site request forgery vulnerability in objects/videoEditLight.php that lacks request authenticity checks and accepts GET requests. Attackers can store an img tag in a video description that transfers video ownership to an attacker-controlled account when an administrator views the video page.

WWBN AVideo

AVideo through commit 9c39d8c8 contains a cross-site request forgery vulnerability in channelToGallery.json.php that allows attackers to modify site-wide Gallery configuration by performing unauthorized writes to plugin data. Attackers can craft a cross-site GET request carrying an administrator's session cookie to promote arbitrary channels to the front page or delete curated sections without token validation.

WWBN AVideo

AVideo through commit 9c39d8c8 contains an information exposure vulnerability in feed/index.php that allows unauthenticated attackers to retrieve channel owner email addresses by supplying a public channel name parameter. Attackers can enumerate all creator email addresses by iterating through public channel names and extract them from the itunes:email and itunes:author RSS elements, enabling account takeover attempts and phishing campaigns.

metaphorcreations Post Duplicator

The Post Duplicator plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the `duplicate_post()` function in all versions up to, and including, 3.0.11. This is due to the function not verifying that the user has `edit_others_posts` capability before accepting a `selectedAuthorId` parameter via the `duplicate-post` REST endpoint. This makes it possible for authenticated attackers, with Contributor-level access and above, to create duplicated posts attributed to any user, including administrators.

TRENDnet TEW-823DRU

A weakness has been identified in TRENDnet TEW-823DRU 1.1.02b01. This vulnerability affects the function nvram_get of the component CLI Configuration Tool. This manipulation causes command injection. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks.

joomgalleryfriends.net JoomGallery extension for Joomla

Joomla Extension - joomgalleryfriends.net - Password-Protected Category Bypass via JSON Format in JoomGallery < 4.4.0- An unauthenticated access control bypass exists in JoomGallery's category JSON view. When a gallery category is protected with a password, the HTML view correctly enforces the password gate - but the JSON view ( format=json ) skips this check entirely.

metaphorcreations Post Duplicator

The Post Duplicator plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 3.0.11. This is due to the `duplicate_post_permissions()` permission callback only verifying the `duplicate_posts` capability without checking whether the requesting user holds `publish_posts` or other status-gated capabilities. This makes it possible for authenticated attackers, with Contributor-level access and above, to create duplicate posts with `future` (scheduled, auto-publishes) or `private` status, bypassing editorial review. Additionally, the REST endpoint does not enforce administrator-configured post-type duplication restrictions, allowing duplication of post types that have been explicitly disabled.

properfraction kk Star Ratings – Rate Post & Collect User Feedbacks

The The kk Star Ratings – Rate Post & Collect User Feedbacks plugin for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 5.4.10.3. This is due to the software allowing users to execute an action that does not properly validate the 'payload' value before running do_shortcode. This makes it possible for unauthenticated attackers to execute arbitrary shortcodes.

Unknown Forminator Forms

The Forminator Forms WordPress plugin before 1.57.0.7 does not consistently enforce the role restriction it applies to registration forms, allowing users who are permitted to build forms to configure one that assigns the administrator role to any visitor who registers through it.

Unknown Tutor LMS

The Tutor LMS WordPress plugin before 4.0.6 does not validate a stored file path before using it to stream media, allowing users with the instructor role to read arbitrary files on the server, including files outside the web root. The readable files include the WordPress configuration file, which exposes the database credentials and the authentication keys and salts, so authentication cookies can be forged.

Unknown Conekta Payment Gateway

The Conekta Payment Gateway WordPress plugin before 6.2.2 does not verify the authenticity of incoming payment gateway webhook notifications, nor bind the confirmed payment to the targeted order or verify its amount, allowing unauthenticated attackers to mark arbitrary orders as paid without payment.

Unknown FiboSearch

The FiboSearch WordPress plugin before 1.34.1 does not consistently exclude password-protected products from its unauthenticated AJAX endpoints, allowing unauthenticated users to disclose and enumerate password-protected products and their metadata without entering the product password. Two endpoints are affected: the autocomplete search endpoint (dgwt_wcas_ajax_search) and the Details Panel endpoint (dgwt_wcas_result_details) when queried for taxonomy details.

Unknown Post Grid, Slider & Carousel Ultimate

The Post Grid, Slider & Carousel Ultimate WordPress plugin before 1.8.1 does not sanitise and escape one of its custom post type settings before outputting it in an HTML attribute on the admin edit screen, allowing users with the Contributor role and above to inject JavaScript that executes in the session of any administrator who opens the affected item.

rubengc AutomatorWP – Automator plugin for no-code automations, webhooks & custom integrations in WordPress

The AutomatorWP – Automator plugin for no-code automations, webhooks & custom integrations in WordPress plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 5.8.4. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to retrieve the site's configured Campaign Monitor mailing list catalog, including all list IDs and names, that should be restricted to users with the plugin's manager capability. The required nonce is emitted unconditionally on every WordPress admin page via wp_localize_script, meaning any subscriber visiting /wp-admin/profile.php can obtain it without any elevated access.

rubengc AutomatorWP – Automator plugin for no-code automations, webhooks & custom integrations in WordPress

The AutomatorWP – Automator plugin for no-code automations, webhooks & custom integrations in WordPress plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 5.8.4. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to retrieve all ConvertKit form data configured by the site's manager account, exposing integration details intended to be restricted to plugin managers. The required nonce is localized on every admin page load, making it accessible to any authenticated user who can reach /wp-admin.

themifyme Themify Builder

The Themify Builder plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 7.8.0. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to modify the stored Themify Builder styling data (padding and margin properties) of arbitrary posts, including private and draft posts, by supplying an attacker-controlled post ID and JSON styling payload. The nonce required by the handler is automatically emitted to all frontend pages rendered by the builder via wp_localize_script, meaning any unauthenticated visitor can trivially retrieve a valid nonce from page source and satisfy the only access control in place.

OliveTin

OliveTin gives access to predefined shell commands from a web interface. The `filterToDefinedArgumentsOnly` function in the executor is intended to discard any arguments not explicitly defined in the action's configuration. However, prior to commit ebffd9f040f791208aee1db2e5a8aecd1e3e603d, a special case allows any argument whose name starts with `ot_` to bypass this filter. While two system arguments (`ot_executionTrackingId` and `ot_username`) are injected by OliveTin and overridden, all other `ot_`-prefixed arguments supplied by the user pass through unmodified. These bypassed arguments are not type-checked — the validation loop only iterates over the action's defined arguments, so `ot_`-prefixed arguments skip all type safety checks entirely; set as environment variables — via `buildEnv()`, with completely unvalidated values, and passed to the executed command; and included in the template context — available as `.Arguments.ot_*` in template rendering. Commit ebffd9f040f791208aee1db2e5a8aecd1e3e603d contains a patch.

weechat

WeeChat (Wee Enhanced Environment for Chat) is a free chat client. In versions 4.3.0 through 4.9.0, the WeeChat relay module's WebSocket permessage-deflate decompression function relay_websocket_inflate() has no upper bound on output size. An authenticated relay user can send a small compressed WebSocket frame (~100 bytes) that decompresses to gigabytes, exhausting all server memory and crashing the entire WeeChat process. The api protocol enables permessage-deflate and requires authentication before WebSocket upgrade. Version 4.9.1 patches the issue.

Combodo iTop

Combodo iTop is a web based IT service management tool.Prior to 3.2.3, an unauthenticated user could delete the .readonly file on iTop instances — a file created during the setup process that prevents users from performing write actions. This issue has been fixed in version 3.2.3.

erweixin RaTeX

RaTeX is a KaTeX-compatible math rendering engine written in Rust. Prior to version 0.1.11, RaTeX’s recursive-descent parser recurses one (or more) native stack frame per nesting level at `{`, `\left`, `\sqrt{`, `^{`, etc, with no maximum depth limit. A short, ~10 KB input of nested groups overflows the 8 MB main-thread stack and aborts the process. With `panic = "abort"` (`Cargo.toml:48`), and because a Rust stack overflow is always a fatal `SIGABRT` regardless of panic strategy this is an unrecoverable, whole-process denial of service reachable from a single untrusted LaTeX string. Version 0.1.11 fixes the issue.

perber leafwiki

LeafWiki is a self-hosted wiki. Prior to version 0.10.2, page titles returned by the search API could be rendered as raw HTML in the frontend. A user with editor or administrator permissions could create or modify a page title containing an HTML/JavaScript payload. When another user searched for a matching term, the payload could execute in the victim’s browser. The impact depends on deployment configuration. With `--public-access` enabled, unauthenticated visitors could be affected. In authenticated-only deployments, the issue could be used for cross-user XSS against logged-in users who can access search results. The issue has been fixed in version 0.10.2 by ensuring that author-controlled page titles in search results are not interpreted as raw HTML by the browser while preserving search result highlighting.

ondata ckan-mcp-server

CKAN MCP Server is a tool for querying CKAN open data portals. A known vulnerability CVE-2026-33060 indicated tools including ckan_package_search and sparql_query that accept a base_url parameter had the risk of making HTTP requests to arbitrary endpoints without restriction. A fix was applied to filter out ip addresses. However, a method to bypass exists prior to version 0.4.106. CKAN MCP Server validates caller-supplied CKAN server URLs by inspecting only the parsed hostname string before issuing outbound HTTP requests. In `src/utils/http.ts`, hostname aliases such as `ip6-localhost` are not equal to `localhost`, are not dotted IPv4 literals, and are not bracketed IPv6 literals, so they pass the SSRF filter but can resolve to loopback when the server performs the request. A remote MCP caller that can invoke CKAN tools with a `server_url` can therefore make the server connect to local or private addresses and, for CKAN-shaped responses, receive response-derived data. The updated fix in version 0.4.106 replaced the single `hostname === 'localhost'` check with a blocked-hostname `Set` covering `ip6-localhost` and `ip6-loopback`.

cenodude CrossWatch

CrossWatch (CW) is a synchronization engine. Prior to version 0.9.21, GET /api/app-auth/status is accessible without authentication and returns the other_sessions array, which exposes metadata of all active sessions — including originating IP addresses, User-Agent strings, internal session IDs, and creation/expiry timestamps. Any unauthenticated network attacker can enumerate this data without credentials. Version 0.9.21 fixes the issue.

kite-org kite

Kite is a Kubernetes dashboard. Prior to version 0.12.3, authenticated Kite users with any role can request `/api/v1/overview` for a cluster that their roles do not permit by selecting that cluster with `x-cluster-name`. The overview route is registered before `middleware.RBACMiddleware()` and `GetOverview` only checks `len(user.Roles) > 0`, so it returns aggregate Kubernetes inventory and capacity data from unauthorized clusters. Version 0.12.3 fixes the issue.

typemill

Typemill is a flat-file, Markdown-based content management system designed for informational documentation websites. Versions prior to 2.23.0 are vulnerable to stored HTML attribute injection in the page metadata fields (`og:title` and `og:description`). An authenticated user with permission to modify page metadata can inject arbitrary HTML attributes into generated `<meta>` tags due to missing output encoding. Under certain browser or DOM interaction scenarios, this may lead to stored cross-site scripting (XSS). Version 2.23.0 fixes the issue.

zenitraM malla

Malla is a web analyzer for Meshtastic networks based on MQTT data. Prior to commit 4086e2b5f61615a813b70b25bc76095083552135, code names (long_name, short_name) received via MQTT are stored in SQLite without sanitization and rendered into the DOM without escaping. Any participant on a public Meshtastic MQTT broker can set a malicious node name that executes JavaScript in the browser of every Malla dashboard visitor. Commit 4086e2b5f61615a813b70b25bc76095083552135 fixes the issue.

Combodo iTop

Combodo iTop is a web based IT service management tool. Prior to 3.2.3, improper access control in ajax.render.php and ajax.document.php allows for document access without checking on user permissions. This issue has been fixed in version 3.2.3.

Combodo iTop

Combodo iTop is a web based IT service management tool. Prior to 3.2.3, an object can be locked by a user who is not assigned write permissions. This issue has been fixed in version 3.2.3.