Veille CVE

Semaine du 17 août au 23 août 2026

2 784 CVE

  1. CVE-2026-74628 9.8 Critique

    Linux

    In the Linux kernel, the following vulnerability has been resolved: net/x25: fix use-after-free of the socket by its timers The x25 timers are armed with mod_timer() and cancelled with timer_delete(), so a pending timer holds no reference on the socket and a cancel does not wait for a callback already running on another CPU. x25_heartbeat_expiry() also rearms unconditionally, so it can reinstall sk->sk_timer after __x25_destroy_socket() has passed its cancel point. The following __sock_put() frees the socket while the timer is still queued, and the next expiry uses freed memory. KASAN reports a slab-use-after-free on the kmalloc-2k object freed by close(). timer_delete_sync() cannot be used here: x25_heartbeat_expiry() and x25_timer_expiry() both reach the cancels from inside the timer they would wait on, through __x25_destroy_socket() and x25_disconnect(). Arm the timers with sk_reset_timer() and cancel them with sk_stop_timer() so that an armed timer owns a reference, and release it in both expiry handlers. Rearm the heartbeat only while sk_hashed(sk) is still true, since __x25_destroy_socket() unlinks the socket before dropping it. Arm the deferred destroy timer the same way and drop its reference in x25_destroy_timer(). Reproduced on net with KASAN, with the heartbeat period shortened so the window recurs. With this patch the reproducer no longer triggers a report and /proc/net/x25 drains. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>

  2. CVE-2026-74627 7.8 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: net: devmem: prevent net-iov / page mixing We should either have net_iov or page backed frags in a single skb, otherwise it blows up down the stack. Don't allow mixing in zerocopy_fill_skb_from_devmem().

  3. CVE-2026-74626 7.5 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: NTB: ntb_netdev: Preserve RX queue depth on allocation failure ntb_netdev_rx_handler() hands the received skb to the network stack before allocating its replacement. If the allocation fails, nothing is reposted. Every failure therefore takes one buffer out of the RX queue while the interface remains up, and enough failures eventually stall reception. A retry path could refill the queue later, but ntb_netdev has none. Allocate the replacement first instead. If that fails, drop the packet and repost the same skb. This keeps the queue full and lets packet delivery resume as soon as memory is available again.

  4. CVE-2026-74625 7.5 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: release template ct on non-IP path A bridge nftables ct zone set rule can attach a conntrack template to an skb before nf_ct_bridge_pre() sees it. For non-IPv4 and non-IPv6 EtherTypes, nf_ct_bridge_pre() currently overwrites skb->_nfct with IP_CT_UNTRACKED without releasing the existing template reference. That makes the per-cpu template, and any temporary templates allocated for concurrent use, unreachable and leaks memory until the host runs out of slab. Reset the skb conntrack state before marking the frame untracked so the existing template reference is dropped on the non-IP path.

  5. CVE-2026-74624 7.5 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack: defer invalid log until after unlock TCP and SCTP conntrack paths can emit invalid-packet logs while ct->lock is still held. When invalid logging is routed to nfnetlink_log and conntrack export is enabled, the log path can re-enter conntrack netlink glue and dump the same conntrack again. Protocol attribute dumping may take ct->lock, so logging while holding that lock can deadlock. Defer the TCP invalid logs by storing only the minimal log context while ct->lock is held and emitting the log after unlocking. Also make the TCP timeout-lowering invalid path return whether a log is needed, then emit that log after unlocking. Do the same for the SCTP invalid state-transition log that can be reached while ct->lock is held. Add a lockdep assertion to nf_ct_l4proto_log_invalid() so future callers that log invalid conntracks while holding ct->lock are caught outside TCP and SCTP as well.

  6. CVE-2026-74623 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: net: atlantic: free stranded TX buffers on ring deinit aq_vec_deinit() drains the TX rings with a single aq_ring_tx_clean() call, which frees at most AQ_CFG_TX_CLEAN_BUDGET (256) descriptors and stops at hw_head, which no longer moves once aq_vec_stop() has stopped the hardware and NAPI. Completed descriptors beyond the budget and everything still posted in [hw_head, sw_tail) keep their skb or xdp_frame when the interface goes down: aq_vec_ring_free() then frees the buffer ring and the references are lost for good. Today this is a silent memory leak on every interface down under TX/XDP_TX load. With the conversion of the RX path to page_pool posted for net-next it becomes much more visible: XDP_TX frames carry fragment references on the RX ring's page_pool, so a single stranded frame keeps the pool's inflight count above zero forever. page_pool_destroy() then never completes, the pool is leaked together with its pages, and "page_pool_release_retry() stalled pool shutdown" is warned every 60 seconds from that point on, on every ifdown, XDP detach or ring resize under XDP_TX load. Bring back aq_ring_tx_deinit() as it was before the removal and use it for teardown again, with one extension: TX rings can hold xdp_frames nowadays, so release those too. They are returned with xdp_return_frame() since this runs in process context.

  7. CVE-2026-74622 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: net: atlantic: free RX pages of consumed but not refilled buffers aq_ring_rx_deinit() only walks [sw_head, sw_tail), the region posted to hardware. Since the page reuse strategy was added, a cleaned RX buffer keeps its page (and its DMA mapping) in the ring for reuse, and refill is batched: aq_ring_rx_fill() returns early until AQ_CFG_RX_REFILL_THRES slots are free. Slots that were consumed but not yet reposted therefore sit in the complementary [sw_tail, sw_head) gap with a live page, and the deinit walk never visits them: up to a refill batch worth of pages and DMA mappings leak on every interface down. Walk the whole ring instead and release whatever is still there. Also bail out if the buffer ring is already gone: a partial aq_ptp_ring_alloc() failure frees the ring but leaves aq_nic set, so aq_ptp_ring_deinit() still gets here on the unwind path.

  8. CVE-2026-74621 7.5 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: fix sk_buff leak when the header checks reject a packet tcf_ct_handle_fragments() runs its header sanity checks before handing anything to the defragmentation engine: if (family == NFPROTO_IPV4) err = tcf_ct_ipv4_is_fragment(skb, &frag); else err = tcf_ct_ipv6_is_fragment(skb, &frag); if (err || !frag) return err; tcf_ct_ipv4_is_fragment() returns -EINVAL or -ENOMEM; tcf_ct_ipv6_is_fragment() adds -EPROTO when ipv6_find_hdr() fails. None of them frees or queues the skb, so on that path the caller still owns it. tcf_ct_act() however funnels every non-zero return into the ownership-transfer exit: err = tcf_ct_handle_fragments(net, skb, family, p->zone, &defrag); if (err) goto out_frag; ... out_frag: if (err != -EINPROGRESS) tcf_action_inc_drop_qstats(&c->common); return TC_ACT_CONSUMED; TC_ACT_CONSUMED means the action took ownership of the skb, so no caller frees it - sch_handle_ingress(), sch_handle_egress() and tcf_qevent_handle() all deliberately skip the free for that verdict. The skb is therefore orphaned: one sk_buff plus its data buffer is leaked per malformed packet, unbounded. Note the drop counter is already incremented for these errors, so the statistics claim a drop that never happens. Three different ownership states reach out_frag: today - the skb may be queued by the defrag engine (-EINPROGRESS), already freed by nf_ct_handle_fragments(), or still owned by us. Tell the caller which of those it is, and free the packet ourselves in the last case, which restores the TC_ACT_SHOT behaviour that predated the Fixes: commit. Reproduced on v7.2-rc6 with a 54-byte frame carrying a 40-byte IPv6 header with nexthdr = 0 (hop-by-hop) and nothing after it, on a clsact ingress chain with "action ct". kmemleak reports one leaked 232-byte skbuff_head_cache object plus its 704-byte data buffer per packet; with this patch it reports none.

  9. CVE-2026-74620 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: net/sched: act_gact, act_police: range check the fallback control action tcf_action_check_ctrlact() range checks the primary control action: if (!opcode) ret = action > TC_ACT_VALUE_MAX ? -EINVAL : 0; TC_ACT_VALUE_MAX is TC_ACT_TRAP, so kernel-internal verdicts above it cannot be set that way. But act_gact and act_police each carry a second, independent control action supplied by user space that never reaches that helper - TCA_GACT_PROB.paction and TCA_POLICE_RESULT. Both only reject TC_ACT_GOTO_CHAIN, so any other value is stored verbatim and returned verbatim from the action. In particular user space can store TC_ACT_CONSUMED, which is TC_ACT_VALUE_MAX + 1 and is deliberately not part of the UAPI value range. That verdict tells every caller the action took ownership of the skb, so nobody frees it: sch_handle_ingress(), sch_handle_egress() and tcf_qevent_handle() all deliberately skip the free for it. The result is one leaked sk_buff plus its data buffer per packet traversing the filter, unbounded, for all traffic on the chain including kernel-generated packets. Both are trivially deterministic. act_gact clamps tcfg_pval to >= 1, so with pval = 1 gact_determ() returns the fallback for every packet. act_police has no mandatory rate, so rate = 0 leaves tcfp_mtu = ~0 and tcf_police_mtu_check() always passes. TC_ACT_CONSUMED was added by commit 720f22fed81b ("net: sched: refactor reinsert action"), after both goto-chain guards were written: commit 9469f375ab09 ("net/sched: act_gact: disallow 'goto chain' on fallback control action") and commit c08f5ed5d625 ("net/sched: act_police: disallow 'goto chain' on fallback control action"). Neither guard was widened when the new verdict appeared. Factor the existing range test out of tcf_action_check_ctrlact() as tcf_action_valid() and apply it to both fallbacks. The helper cannot call tcf_action_check_ctrlact() directly because that also allocates a goto_chain, which is exactly what these two sites must not do. Reproduced on v7.2-rc6: kmemleak reports one leaked 232-byte skbuff_head_cache object plus its 704-byte data buffer per packet. With this patch both configurations are rejected with -EINVAL and kmemleak reports none.

  10. CVE-2026-74619 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: ovl: don't warn when the mount is completed from another user namespace fsopen() records the caller's user namespace in fc->user_ns and hands back an ordinary file descriptor. Nothing ties the task that calls fsconfig(FSCONFIG_CMD_CREATE) to the task that created the context. The fd is inherited across fork() and exec() and it can be passed over a unix socket. Completing a context from another user namespace is allowed on purpose. vfs_cmd_create() authorizes the create with mount_capable(), which for FS_USERNS_MOUNT checks ns_capable(fc->user_ns, CAP_SYS_ADMIN), and that succeeds for a task holding CAP_SYS_ADMIN in an ancestor of fc->user_ns. So an unprivileged task can reach the WARN_ON() in ovl_fill_super(): create a user and a mount namespace in a child, call fsopen("overlay") there, send the fscontext fd to the parent and let the parent issue FSCONFIG_CMD_CREATE. Both namespaces come from a plain unshare(1) and no capability is needed anywhere: WARNING: fs/overlayfs/super.c:1551 at ovl_fill_super+0x7b9/0x1e20 [overlay] CPU: 3 UID: 1000 PID: 3243376 Comm: fswarn Call Trace: get_tree_nodev+0x71/0xa0 ovl_get_tree+0x15/0x20 [overlay] vfs_get_tree+0x2a/0x100 vfs_cmd_create+0x60/0xf0 __do_sys_fsconfig+0x4b2/0x500 The child needs the mount namespace because fsopen() itself gates on may_mount(), which asks for CAP_SYS_ADMIN in the user namespace owning the caller's mount namespace. fsconfig() doesn't repeat that check. It is a WARN_ON() and not a WARN_ON_ONCE(), so the condition can be raised in a loop to taint the kernel and flood the log, and it panics a kernel booted with panic_on_warn. Keep refusing the mount and stop warning about it. ovl_parse_param() already spells a user namespace check this way for Opt_override_creds.

  11. CVE-2026-74618 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: don't warn when the mount is completed from another user namespace fsopen() records the caller's user namespace in fc->user_ns and hands back an ordinary file descriptor. Nothing ties the task that calls fsconfig(FSCONFIG_CMD_CREATE) to the task that created the context. The fd is inherited across fork() and exec() and it can be passed over a unix socket. Completing a context from another user namespace is allowed on purpose. vfs_cmd_create() authorizes the create with mount_capable(), which for FS_USERNS_MOUNT checks ns_capable(fc->user_ns, CAP_SYS_ADMIN), and that succeeds for a task holding CAP_SYS_ADMIN in an ancestor of fc->user_ns. So an unprivileged task can reach the WARN_ON() in bm_fill_super(): create a user and a mount namespace in a child, call fsopen("binfmt_misc") there, send the fscontext fd to the parent and let the parent issue FSCONFIG_CMD_CREATE. Both namespaces come from a plain unshare(1) and no capability is needed anywhere: WARNING: fs/binfmt_misc.c:938 at bm_fill_super+0xa2/0xc0 [binfmt_misc] CPU: 15 UID: 1000 PID: 3243382 Comm: fswarn Call Trace: get_tree_keyed+0x7d/0xb0 bm_get_tree+0x34/0x90 [binfmt_misc] vfs_get_tree+0x2a/0x100 vfs_cmd_create+0x60/0xf0 __do_sys_fsconfig+0x4b2/0x500 The child needs the mount namespace because fsopen() itself gates on may_mount(), which asks for CAP_SYS_ADMIN in the user namespace owning the caller's mount namespace. fsconfig() doesn't repeat that check. It is a WARN_ON() and not a WARN_ON_ONCE(), so the condition can be raised in a loop to taint the kernel and flood the log, and it panics a kernel booted with panic_on_warn. Keep refusing the mount and stop warning about it. Nothing in bm_fill_super() depends on the two namespaces matching, it derives everything from sb->s_user_ns.

  12. CVE-2026-74617 9.8 Critique

    Linux

    In the Linux kernel, the following vulnerability has been resolved: dibs: initialise dibs->lock in dibs_dev_alloc() dibs->lock is initialised by dibs_dev_add(), but a dibs device can already take interrupts before that call: ism_probe() runs ism_dev_init(), and hence request_irq(), before it calls dibs_dev_add(). No client can have registered a dmb at that point, so no dmb interrupt can occur, but a GID event interrupt can, and ism_handle_irq() takes dibs->lock unconditionally on entry, before it inspects anything else. Initialise the lock in dibs_dev_alloc() instead, so that it is valid as soon as a driver can publish the device to its interrupt handler.

  13. CVE-2026-74616 9.8 Critique

    Linux

    In the Linux kernel, the following vulnerability has been resolved: xdp: reject clones that overrun skb_shared_info tailroom xdpf_clone() clones broadcast copies into a single page and sets frame_sz to PAGE_SIZE. __xdp_build_skb_from_frame() later treats that page like a normal XDP frame and expects the usual skb_shared_info tailroom at the end of the buffer. The current check only rejects frames whose linear xdp_frame header, headroom, and packet data exceed PAGE_SIZE. A source frame backed by a larger allocation can still satisfy that check while extending into the clone's required shared-info area. When such a clone is converted back into an skb, build_skb_around() places skb_shared_info over live packet bytes and later writes can corrupt XDP return metadata. Reject clones unless their linear area fits inside SKB_WITH_OVERHEAD(PAGE_SIZE), matching the tailroom requirement already enforced by the XDP-to-skb conversion path.

  14. CVE-2026-74615 8.8 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: vxlan: do not arm the ageing timer on a device that is down vxlan_changelink() arms vxlan->age_timer whenever the requested ageing interval differs from the configured one: if (conf.age_interval != vxlan->cfg.age_interval) mod_timer(&vxlan->age_timer, jiffies); There is no netif_running() test, so the timer is armed even on a device that was never brought up. The only synchronous cancel in the driver is the timer_delete_sync() in vxlan_stop(), which is .ndo_stop. netif_close_many() drops devices without IFF_UP before __dev_close_many() runs, so that cancel is skipped for such a device. vxlan_setup() sets dev->needs_free_netdev = true and age_timer is a member of struct vxlan_dev, so free_netdev() releases the allocation the timer lives in while it is still queued on a timer_base. expire_timers() unlinks the entry before it loads timer->function, so the timer core writes through the freed object's list pointers: BUG: KASAN: slab-use-after-free in __run_timers+0x208/0x654 Write of size 8 at addr ffff00001adace68 by task true/192 __asan_store8+0x84/0xac __run_timers+0x208/0x654 run_timer_softirq+0x154/0x18c Allocated by task 189: alloc_netdev_mqs+0x64/0x720 rtnl_create_link+0x4ac/0x520 rtnl_newlink+0x758/0xd00 Freed by task 191: netdev_release+0x40/0x58 netdev_run_todo+0x4a4/0x8c0 rtnl_dellink+0x200/0x4e8 The rtnl operations involved are netns-scoped, so an unprivileged user can perform them in a new user and network namespace. Arming the timer on a down device never had an effect: vxlan_cleanup() returns early on !netif_running(), and vxlan_open() arms the timer for any non-zero interval once the device is brought up. Add the missing test. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>

  15. CVE-2026-74614 8.4 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: read virtqueues under worker locks Commit bd50c5dc182b ("vsock/virtio: add support for device suspend/resume") made the *_run flags transition from false to true when restore installs replacement virtqueues. The RX, TX and event workers read their virtqueue before locking and checking the corresponding flag, so a worker delayed across freeze and restore can observe the replacement queue's running state while retaining a pointer to the deleted queue. Read each virtqueue under its mutex after checking the run flag, keeping the pointer and state in the same queue generation.

  16. CVE-2026-74613 7.8 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: avoid refilling the RX queue after teardown Commit b917507e5ad9 ("vsock/virtio: stop workers during the .remove()") made the RX worker jump to its common exit when rx_run is clear. That exit still refills the RX queue when the buffer count is low, so work queued across virtio_vsock_vqs_del() can add buffers after the virtqueues have been deleted. BUG: KASAN: slab-use-after-free in virtqueue_add_sgs Read of size 4 by task kworker/0:1 Workqueue: virtio_vsock virtio_transport_rx_work Call Trace: virtqueue_add_sgs (drivers/virtio/virtio_ring.c:2796) virtio_vsock_rx_fill (net/vmw_vsock/virtio_transport.c:332) virtio_transport_rx_work (net/vmw_vsock/virtio_transport.c:701) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) ... Freed by task 141: kfree (mm/slub.c:6566) vp_del_vq (drivers/virtio/virtio_pci_common.c:259) vp_del_vqs (drivers/virtio/virtio_pci_common.c:285) virtio_vsock_freeze (net/vmw_vsock/virtio_transport.c:912) virtio_device_freeze (drivers/virtio/virtio.c:658) virtio_pci_freeze (drivers/virtio/virtio_pci_common.c:601) pci_pm_freeze (drivers/pci/pci-driver.c:1098) device_suspend (drivers/base/power/main.c:1968) Kernel panic - not syncing: KASAN: panic_on_warn set ... Jump to a no-refill exit when rx_run is clear, leaving the normal exit to replenish a running queue.

  17. CVE-2026-74612 10.0 Critique

    Linux

    In the Linux kernel, the following vulnerability has been resolved: veth: fix skb length accounting after XDP frag adjustment veth exposes non-linear skb fragments through an xdp_buff. If an XDP program adjusts the fragment area, veth_xdp_rcv_skb() copies xdp_frags_size back to skb->data_len but leaves skb->len containing the old fragment contribution. After a fragment shrink, this makes skb_headlen() larger than the actual linear area. In the reproduced UDP receive path, __skb_datagram_iter() copied 1024 bytes past the actual linear tail to userspace, starting at struct skb_shared_info. The copied bytes included the affected skb's nr_frags, xdp_frags_size, and a kernel pointer from skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same amount and truncated at the end. Subtract the old data_len before replacing it and add the new data_len afterwards, keeping skb->len and skb->data_len synchronized. Additionally, bpf_xdp_pull_data() can advance data_end while leaving frags present. The skb is then still non-linear, so the old __skb_put(skb, off) triggers SKB_LINEAR_ASSERT(). Use skb_set_tail_pointer() and update skb->len explicitly instead, following bpf_prog_run_generic_xdp(). Unlike __skb_put(), skb_set_tail_pointer() does not require a linear skb. A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by 1024 bytes from its fragment area. Before the fix, all 10 runs produced corrupted payloads. After the fix, all 10 runs matched the expected payload exactly. A forced-tailroom reproducer also exercises bpf_xdp_pull_data() with frags still present; the old code triggers SKB_LINEAR_ASSERT(), while this fix passes 10/10 runs.

  18. CVE-2026-74611 9.8 Critique

    Linux

    In the Linux kernel, the following vulnerability has been resolved: tls: rx: restore msg_iter before TLS 1.3 optimistic retry tls_decrypt_sg() advances msg->msg_iter when it maps user pages for the optimistic TLS 1.3 zero-copy path. If the decrypted record turns out not to be unpadded application data, tls_decrypt_sw() retries into a kernel skb, but leaves the iterator advanced. The subsequent copy from the skb then writes decrypted bytes again at a later point in the caller iovecs while recvmsg() reports only the post-retry length. A TLS peer can trigger this after the receiver enables TLS_RX_EXPECT_NO_PAD. Revert the iterator by the number of bytes consumed by the optimistic mapping before retrying without zero-copy. Add a selftest which sends a TLS 1.3 control record with TLS_RX_EXPECT_NO_PAD enabled and verifies that recvmsg() does not overwrite later iovecs beyond the returned length.

  19. CVE-2026-74610 7.8 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: tls: don't leave a full plaintext sk_msg ring unpushed When the copy path in tls_sw_sendmsg_locked() adds the fragment that fills the plaintext sk_msg ring, it does not set full_record, so the record is left full and unpushed. A later splice() then adds to an already full ring: sk_msg_page_add() has no fullness check of its own, so sg.end wraps onto sg.start and the ring appears empty. Fragments added after that overwrite live entries, and sg.size no longer matches what is reachable between sg.start and sg.end, so pushing the record runs the scatterwalk off the end of the scatterlist. An unprivileged user can trigger this on a loopback TCP socket with the "tls" ULP attached: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:memcpy_from_scatterwalk+0x32/0xc0 Call Trace: skcipher_walk_next+0x1d1/0x2c0 gcm_encrypt_aesni_avx+0x1e9/0x220 bpf_exec_tx_verdict+0x3bb/0x860 tls_sw_sendmsg+0xa1a/0xca0 __sys_sendto+0x1da/0x1f0 Set full_record in the copy path when the ring becomes full, and push a record that is already full on entry to the sendmsg loop.

  20. CVE-2026-74609 7.8 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: tipc: read le->link under the node lock in tipc_node_link_down() tipc_node_link_down() caches the link pointer before taking n->lock: struct tipc_link *l = le->link; /* unlocked */ if (!l) return; tipc_node_write_lock(n); if (!tipc_link_is_establishing(l)) { /* deref l */ ... tipc_link_reset(l); /* write into l */ if (delete) { kfree(l); le->link = NULL; The delete=true caller frees that very object under n->lock, so the lock does not protect the cached pointer against it: - CPU A, delete=false: tipc_rcv() on TIPC_LINK_DOWN_EVT, or the link supervision timer via tipc_node_timeout(), reads l unlocked and then dereferences it under n->lock; - CPU B, delete=true: netlink TIPC_NL_BEARER_DISABLE -> bearer_disable() -> tipc_node_delete_links() -> tipc_node_link_down(n, bearer_id, true) -> kfree(l). The link is freed with plain kfree(), not kfree_rcu(), and for UDP bearers disable_media() only schedules the asynchronous cleanup_bearer() work, so its synchronize_net() runs after the links are already gone. An in-flight CPU A that has read l therefore dereferences freed memory once B frees it: a use-after-free read in tipc_link_is_establishing(), and a use-after-free write via tipc_link_reset() on the establishing branch. The following trace was captured on 7.2.0-rc5-00284-gaf39eb111ce6: BUG: KASAN: slab-use-after-free in tipc_link_is_establishing (net/tipc/link.c:285) Read of size 4 at addr ffff88802e2aa068 by task swapper/2/0 tipc_link_is_establishing (net/tipc/link.c:285) tipc_node_link_down (net/tipc/node.c:1076) tipc_node_timeout (net/tipc/node.c:843) Allocated by task 9549: tipc_link_create (net/tipc/link.c:490) tipc_node_check_dest (net/tipc/node.c:1279) tipc_disc_rcv (net/tipc/discover.c:252) tipc_udp_recv (net/tipc/udp_media.c:389) Freed by task 9549: tipc_node_link_down (net/tipc/node.c:1084) tipc_node_delete_links (net/tipc/node.c:1320) bearer_disable (net/tipc/bearer.c:414) __tipc_nl_bearer_disable (net/tipc/bearer.c:992) Move the le->link read inside tipc_node_write_lock(), so it is serialised against the kfree() in the delete path. A racing teardown now either has not run yet, and we see a valid link, or has already run, and we see NULL.

  21. CVE-2026-74608 9.8 Critique

    Linux

    In the Linux kernel, the following vulnerability has been resolved: smb: client: Fix use-after-free in cifs_try_adding_channels() cifs_try_adding_channels() takes a temporary reference to an interface before dropping iface_lock. If cifs_ses_add_channel() fails, it drops that reference and then increments iface->weight_fulfilled. A concurrent interface list refresh can remove the list reference while channel creation is in progress. In that case, the failure-path kref_put() releases the last reference and frees iface. Updating weight_fulfilled afterward then accesses freed memory. Increment weight_fulfilled before dropping the temporary reference, keeping iface alive for the final access.

  22. CVE-2026-74607 8.8 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Serialize accesses to the owner and mirror list with separate lock Interaction between KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM and KVM_CAP_VM_COPY_ENC_CONTEXT_FROM can cause two separate issues: - in sev_migrate_from(), when the destination KVM is a mirror, the mirror entry is moved from the source's list to the owner's mirror_vms list, without holding the owner's lock unlike other writers of the owner's mirror list (sev_vm_copy_enc_context_from(), sev_vm_destroy()). A concurrent COPY or destroy can race with sev_migrate_from() and corrupt the list. - In sev_vm_destroy(), the *owner* is still active and could receive concurrently a KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM that causes sev->enc_context_owner to change. In this case the incorrect VM receives kvm_put_kvm(). The second issue needs particular care because the owner could disappear altogether (even though the race window is impossibly small) between reading it and locking it. There is thus no way to perform the checks under the owner lock without putting struct kvm under SLAB_TYPESAFE_BY_RCU (which would allow kvm_get_kvm_safe() under RCU critical section). It is much simpler to just use a global lock, since the critical sections are so small and the new lock is always a leaf lock.

  23. CVE-2026-74606 7.8 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: eventfs: Fix use-after-free in eventfs_remove_rec() eventfs_remove_rec() recursively removes the child at the current loop position. After the recursive call returns, list_for_each_entry() advances by reading list.next from the removed child. If free_ei() drops the final reference, release_ei() reuses the list/rcu union to queue an SRCU callback. The child may be freed before that read. The eventfs_mutex serializes list updates, but it does not keep the removed child alive or prevent the SRCU callback from running. Use list_for_each_entry_safe() to save the next sibling before recursively removing the current child.

  24. CVE-2026-74605 7.8 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: eventfs: Use children field for rcu head and add memory barriers When an eventfs inode is freed, it sets ei->is_freed and then uses its ei->list to add it to the srcu link list as the list field is a union with the rcu list head. As the ei->list is used to iterate over an SRCU protected list without taking the eventfs_mutex, there's nothing stopping the iteration over that list to see the ei->rcu instead of the ei->list and it will read a corrupt target. To fix this, change the union of the rcu list head with the children list. On freeing the eventfs inode, set the is_free and execute a smp_wmb() before adding the eventfs inode to the SRCU list. On iteration of the ei->children list, at the start, execute a smp_rmb() and then read the is_freed of the ei to see if the children list is still valid. If is_freed is set, then the ei_child read is not valid and the loop should exit immediately.

  25. CVE-2026-74604 8.4 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: Revert "thermal/drivers/hwmon: Cleanup coding style a bit" Revert commit 030a48b0f6ce ("thermal/drivers/hwmon: Cleanup coding style a bit") that introduced a use-after-free into the error path of thermal_add_hwmon_sysfs() by removing a valid check from it.

  26. CVE-2026-74603 7.1 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: ptp: ocp: Fix board ID over-read The EEPROM board ID is a fixed 13-byte field and is not guaranteed to contain a NUL terminator. Passing it directly to devlink_info_version_fixed_put() treats it as a C string and may read beyond the field. Format at most OCP_BOARD_ID_LEN bytes into the existing local buffer before reporting the ID. Use a precision limit because the snprintf() output size alone does not bound the source string scan.

  27. CVE-2026-74602 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Initialise reader page order in rb_allocate_cpu_buffer() In rb_allocate_cpu_buffer(), bpage->order was omitted, leaving it as 0. This is an issue for a ring-buffer with subbufs bigger than PAGE_SIZE if when freed: free_buffer_page() relies on this value. Align the value with the actual allocation size (buffer::subbuf_order).

  28. CVE-2026-74601 7.8 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Use current_context for safe per-CPU buffer swap The ring_buffer_swap_cpu() function currently checks the per-CPU committing counter to determine if a buffer is actively being written to before performing the swap. However, there exists a race window where this check can be bypassed: ring_buffer_lock_reserve cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_a rb_reserve_next_event rb_start_commit // inc committing if (unlikely(READ_ONCE(cpu_buffer->buffer) != buffer)) {...} __rb_reserve_next rb_move_tail rb_end_commit(cpu_buffer); // dec committing => 0 /* interrupt hits here, successfully swaps! */ local_inc(&cpu_buffer->committing); ring_buffer_unlock_commit cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_b rb_commit rb_end_commit RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing)) // triggers warning The committing counter can temporarily drop to 0 during a single write operation (within rb_move_tail), creating a window where swap can succeed even though the write is still in progress. This leads to inconsistent buffer state and triggers the RB_WARN_ON in rb_commit(). Replace the committing counter check with current_context checks, which are set at the entry of ring_buffer_lock_reserve() and remain valid throughout the entire write operation, providing a reliable indicator of buffer busy state during swap.

  29. CVE-2026-74600 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: mm/page_table_check: skip special zero mappings page_table_check_set() and page_table_check_clear() account mappings based on PageAnon(). Shared zero-page PTEs and huge zero PMDs are special mappings, but page_table_check can still account them as file-backed pages. An unprivileged process can populate enough zero mappings to overflow file_map_count and hit the existing BUG_ON(). The PTE path can do this with the shared zero page, and the PMD path can do the same with huge zero mappings. Skip special zero mappings in the user page-table accounting paths. Keep the PTE-side pte_special() check, and identify huge zero PMDs from the mapped folio instead of pmd_special(). That covers architectures where pmd_special() is a no-op without adding huge_zero_pfn checks to the generic counter helpers.

  30. CVE-2026-74599 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: mm/ptdump: always stabilise against page table freeing using init_mm Previous commits have established the invariant that kernel page table freeing is performed while an mmap read lock on init_mm is held, which fixes races between ptdump and kernel page table freeing over init_mm. However, x86 and arm64 can perform a ptdump over an mm other than init_mm via ptdump_walk_pgd() and since kernel memory ranges are shared across non-kernel mm's, this means that the race still exists for these cases. Fix this by acquiring a nested mmap write lock for init_mm in ptdump_walk_pgd(). This is safe as we take this after mmap write locking the mm, and nothing acquires the init_mm lock first before locking an arbitrary mm, so no deadlock is possible. Also update walk_page_range_debug() to assert that init_mm is write locked, add a comment explaining why and remove some redundant code, and eliminate the unnecessary and confusing invocation of walk_kernel_page_table_range(). We can safely remove the non-NULL check for walk.mm, as the mmap lock asserts would NULL pointer deref if it was (and of course no callers do this). The first point at which ptdump can race kernel page table freeing is commit b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page table"), so we target this in the Fixes tag.

  31. CVE-2026-74598 7.5 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: ipv6: fix Route Information option length validation rt6_route_rcv() validates the Route Information option (RFC 4191) length against the prefix length, but both checks are off by one. rinfo->length is the ND option length in units of 8 octets and it *includes* the 8-byte option header, so an option carrying N bytes of prefix has length == 1 + N/8. RFC 4191 section 2.3 requires length 3 when Prefix Length is greater than 64, and 2 or 3 when it is greater than 0. The code accepts length >= 2 and length >= 1 respectively. ipv6_addr_prefix() then copies prefix_len/8 bytes out of rinfo->prefix, so a Router Advertisement with (prefix_len=128, length=2) or (prefix_len=64, length=1) makes the kernel read up to 8 bytes past the end of the option. Those bytes end up in the prefix of the route that gets installed, so they are visible to userspace: # RA with a Route Information option (prefix_len=128, length=2) # followed by a source link-layer address option, 01 01 de ad be ef ca fe $ ip -6 route show 2001:db8:dead:beef:101:dead:beef:cafe via fe80::1234 dev veth0 proto ra ^^^^^^^^^^^^^^^^^^ the next option, read out of bounds When the Route Information option is the last one in the packet, those eight bytes come from the skb tail room instead. Reject the option lengths RFC 4191 does not allow.

  32. CVE-2026-74597 9.8 Critique

    Linux

    In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: clear skb2->cb[] in ip6ip6_err() ip6ip6_err() clones an outer IPv6 ICMP error skb, pulls it to the quoted inner IPv6 packet, and then passes the clone to icmpv6_send(). The clone still carries the outer packet's inet6_skb_parm in skb->cb. If the outer packet had a Home Address Option, IP6CB(skb2)->dsthao remains non-zero after skb_pull(). icmpv6_send() later calls mip6_addr_swap(), which uses that stale dsthao offset against the quoted inner packet. A malformed inner destination-options header can then make the HAO lookup and address swap run past the end of the quoted packet and corrupt skb_shared_info. Clear skb2->cb[] before pulling the quoted inner IPv6 packet so the reply path does not reuse metadata left by the outer IPv6 stack.

  33. CVE-2026-74596 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: fs,fsverity: remove check for fsverity being enabled in setattr_prepare() The check that fs-verity is available in the kernel is not necessary here. Filesystems could have fsverity files even without fs-verity enabled. In that case, truncate on fsverity file will succeed, what this check is trying to prevent.

  34. CVE-2026-74595 7.8 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: fscrypt: use the mount idmap for the owner check in fscrypt_ioctl_set_policy() fscrypt_ioctl_set_policy() calls inode_owner_or_capable() with &nop_mnt_idmap before allowing an encryption policy to be set, instead of the idmap of the mount the ioctl was issued on. fscrypt is used by filesystems that support idmapped mounts (e.g. ext4, f2fs), so on such a mount this compares the caller's fsuid against the unmapped on-disk owner rather than the mapped owner: the actual owner can be wrongly denied with -EACCES and an unrelated caller wrongly allowed. Use file_mnt_idmap(filp) instead.

  35. CVE-2026-74594 7.8 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: sched/psi: Shut down rtpoll_timer in psi_cgroup_free() psi_schedule_rtpoll_work() is called locklessly from the scheduler hotpath and can race psi_trigger_destroy() taking down the last rtpoll trigger under rtpoll_trigger_lock: psi_schedule_rtpoll_work() psi_trigger_destroy() rcu_read_lock(); task = rcu_dereference(rtpoll_task); rcu_assign_pointer(rtpoll_task, NULL); timer_delete(&rtpoll_timer); mod_timer(&rtpoll_timer, ...); rcu_read_unlock(); synchronize_rcu(); kthread_stop(task_to_destroy); The group can then be freed with the re-armed timer still pending, and poll_timer_fn() runs on freed memory. 461daba06bdc ("psi: eliminate kthread_worker from psi trigger scheduling mechanism") deleted the timer synchronously after the synchronize_rcu(), which prevented this but raced trigger creation instead: the deletion could cancel the timer that a new trigger set armed during the grace period and, as creation also reinitialized the timer at the time, corrupt it. 8f91efd870ea ("psi: Fix race between psi_trigger_create/destroy") moved the initialization into group_init() and the deletion into the locked section, trading the creation races for the window above. Neither placement in the destruction path works. A pending timer firing while the group is alive is harmless though. poll_timer_fn() just wakes the rtpoll waitqueue and doesn't re-arm itself. Bind the timer to the group's lifetime instead and shut it down in psi_cgroup_free(). Nothing can arm it by then. timer_shutdown_sync() because the timer is never armed again.

  36. CVE-2026-74593 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: sched_ext: Take cgroup_lock() first in scx_cgroup_lock() scx_cgroup_lock() write-locks scx_cgroup_ops_rwsem and then takes cgroup_lock(), which can deadlock through kernfs: scx enable/disable cgroup rmdir cpu.weight write ------------------ ------------ ---------------- cgroup_lock() percpu_down_write(rwsem) cgroup_lock() kernfs_get_active() percpu_down_read(rwsem) kernfs_drain() The enable path waits for the rmdir to release cgroup_mutex. The rmdir, deactivating the cpu controller's files, waits in kernfs_drain() for the write's active reference. The write, in scx_group_set_weight(), waits for the rwsem behind the pending writer. Take cgroup_lock() first. The set_* paths take no cgroup locks inside the read side, so a pending write-lock then only waits for read sections that always run to completion, and no dependency from the rwsem back to cgroup_mutex remains.

  37. CVE-2026-74592 8.1 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: ima: Instantiate file_truncate and path_truncate hooks Instantiate the file_truncate and path_truncate LSM hooks to reset the action cache flags (IMA_DONE_MASK) as soon as truncation is requested, so the file, based on policy, is re-collected, re-measured, re-audited, and re-appraised on next access.

  38. CVE-2026-74591 9.8 Critique

    Linux

    In the Linux kernel, the following vulnerability has been resolved: mm/filemap: __filemap_add_folio() restore index before retrying In __filemap_add_folio()'s split-a-conflict loop, xas_set_order() is applied repeatedly: each application modifies xas.xa_index, rounding it down according to the split_order attempted at that stage: and if all goes as intended, it eventually (or immediately) converges on an xas_try_split() to the required folio_order, with xas.xa_index now the same as index: then xas_store() puts the new folio into the xarray there. But if a new node was needed, and GFP_NOWAIT allocation did not get one, the lock is dropped, xas_nomem() used to allocate, and sequence retried. If (that part of) the xarray is unchanged when the lock is reacquired, no problem. But what if the conflict was meanwhile resolved by another thread (perhaps even doing the same thing, inserting a folio at that same index)? Isn't there a danger of now putting our folio into the xarray at an intermediate rounded-down index? With !folio_contains() bug to follow, when CONFIG_DEBUG_VM=y is checking for that. Fix this with an xas_set_order() to restore the original xas.xa_index at the bottom of the loop, so the retry does a full re-evaluation after reacquiring the lock, and cannot reach xas_store() with the wrong index. Production was suffering from rare SIGILLs and SIGSEGVs, executable text found a page away from where it belonged, !folio_contains() bug hit when debug enabled: symptoms not seen since this patch went in.

  39. CVE-2026-74590 7.8 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: fsverity: Fix bpf_get_fsverity_digest() dynptr assumptions The BPF verifier and the dynptr abstraction ensure that the memory space referenced by a dynptr remains valid. They do not, however, provide any guarantee that the contents of the memory are stable. kfuncs are expected to remain memory-safe even if concurrent modifications occur. bpf_get_fsverity_digest() didn't follow that: it could crash if arg->digest_size was concurrently modified. Fix that by using the known-good value hash_alg->digest_size instead. Also widen 'dynptr_sz' and 'out_digest_sz' to u64 to match the return type of __bpf_dynptr_size(). It doesn't appear that it can actually be more than INT_MAX currently (since __bpf_dynptr_data_rw() excludes file-based pointers), but the correct type might as well be used.

  40. CVE-2026-74589 8.4 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix sk_redir use-after-free in send verdict sk_psock_msg_verdict() takes a socket reference for psock->sk_redir. tcp_bpf_send_verdict() copies that pointer while holding the source socket lock, but does not take a reference for the local copy before dropping the lock around tcp_bpf_sendmsg_redir(). When apply_bytes keeps the cached verdict active, another sendmsg() on the same source socket can consume the remaining bytes and release the cached reference while the first thread still holds only the raw local pointer: CPU 0 CPU 1 sk_redir = psock->sk_redir apply_bytes remains nonzero release_sock(sk) lock_sock(sk) apply_bytes reaches zero psock->sk_redir = NULL release_sock(sk) tcp_bpf_sendmsg_redir(sk_redir) sock_put(sk_redir) tcp_bpf_sendmsg_redir(sk_redir) The final sock_put() can free sk_redir before CPU 0 dereferences it. KASAN reported: BUG: KASAN: slab-use-after-free in tcp_bpf_sendmsg_redir+0xf39/0x1020 Read of size 8 at addr ffff888108537090 by task poc/87 Call Trace: tcp_bpf_sendmsg_redir+0xf39/0x1020 tcp_bpf_sendmsg+0x977/0x1a50 __sys_sendto+0x32c/0x3a0 __x64_sys_sendto+0xdb/0x1b0 Allocated by task 85: sk_prot_alloc+0x56/0x210 sk_clone+0x6f/0x14b0 inet_csk_clone_lock+0x24/0x740 tcp_create_openreq_child+0x25/0x2710 tcp_v4_syn_recv_sock+0x10a/0xe00 Freed by task 0: __kasan_slab_free+0x43/0x70 slab_free_after_rcu_debug+0xa6/0x1e0 rcu_core+0x50a/0x1850 Last potentially related work creation: __sk_destruct+0x3da/0x540 sk_psock_destroy+0x81e/0xab0 process_one_work+0x63a/0x1070 Take a temporary socket reference while the source socket lock still protects psock->sk_redir, and drop it after tcp_bpf_sendmsg_redir() returns. This keeps each unlocked use independent of cached-verdict ownership.

  41. CVE-2026-74588 9.8 Critique

    Linux

    In the Linux kernel, the following vulnerability has been resolved: sctp: keep chunk->transport in step with the list it is queued on __sctp_outq_flush_rtx() moves a gap-acked chunk onto another transport's transmitted list without updating chunk->transport: if (chunk->tsn_gap_acked) { list_move_tail(&chunk->transmitted_list, &transport->transmitted); continue; } The chunk then sits on a live transport's list while chunk->transport still names a different one. If that transport is removed - sctp_assoc_rm_peer() from an ASCONF Delete-IP - sctp_transport_free() RCU-frees it and the chunk is left with a dangling pointer. sctp_assoc_rm_peer() scrubs peer->transmitted and asoc->outqueue.out_chunk_list, but the chunk is on neither. The pointer is not followed while tsn_gap_acked is set. A SACK that reneges on the TSN clears the flag, and the next SACK reaches tchunk->transport->flight_size -= sctp_data_size(tchunk); inside the freed transport. KASAN reports a slab-use-after-free read in sctp_check_transmitted(), freed from sctp_assoc_rm_peer(). Both the removal and the SACKs come from the association peer. Set chunk->transport at the move. The ordinary resend path needs nothing: it reaches its list_move_tail() only after sctp_packet_append_chunk() returned SCTP_XMIT_OK, and __sctp_packet_append_chunk() has rebound the chunk by then. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>

  42. CVE-2026-74587 9.8 Critique

    Linux

    In the Linux kernel, the following vulnerability has been resolved: sctp: fix use-after-free of cached ASCONF chunk addip_last_asconf caches the outstanding outbound ASCONF chunk. The normal ASCONF-ACK completion path releases the chunk and clears the pointer. However, sctp_asconf_queue_teardown() releases the cached chunk without clearing addip_last_asconf. During peer restart handling, sctp_sf_do_dupcook_a() queues SCTP_CMD_PURGE_ASCONF_QUEUE, which invokes sctp_asconf_queue_teardown() while the association remains alive and leaves the pointer dangling. A delayed authenticated ASCONF-ACK can then reach sctp_sf_do_asconf_ack(), which accesses the stale chunk and passes it to sctp_process_asconf_ack(), causing a use-after-free and a second release. Clearing the pointer exposes a race with T4 expiry. Peer restart handling queues the timer stop before the purge, but SCTP_CMD_TIMER_STOP uses timer_delete(), which does not wait for a callback already running on another CPU. Such a callback can reach sctp_sf_t4_timer_expire() after the purge and dereference NULL. Clear addip_last_asconf after releasing the cached chunk, and make sctp_sf_t4_timer_expire() consume a stale T4 expiry if no outstanding ASCONF remains.

  43. CVE-2026-74586 9.8 Critique

    Linux

    In the Linux kernel, the following vulnerability has been resolved: sctp: clear new_transport when removing a peer sctp_process_asconf_param() stores a newly added peer transport in asoc->new_transport. After all parameters in the ASCONF chunk have been processed, sctp_sf_do_asconf() uses this pointer to send a HEARTBEAT to the new transport. An authenticated ASCONF from a remote SCTP peer can add a transport and remove it again with a wildcard DEL-IP parameter in the same chunk. The wildcard deletion preserves the transport on which the ASCONF arrived, but removes the newly added transport through sctp_assoc_del_nonprimary_peers(). The removal does not clear asoc->new_transport, leaving it pointing to the removed transport. sctp_sf_do_asconf() then creates a HEARTBEAT whose chunk->transport points to the removed transport without holding a transport reference. During local address replacement, src_out_of_asoc_ok keeps this HEARTBEAT on control_chunk_list. After the transport is freed by RCU, a successful ASCONF_ACK for the replacement address releases the queued HEARTBEAT and sctp_outq_select_transport() reads the freed transport's state. The issue was found during a static audit of SCTP objects. With an authenticated peer, the reproducer triggered the same KASAN report in 2 of 2 unpatched runs on a KASAN-enabled netdev/main kernel: BUG: KASAN: slab-use-after-free in sctp_outq_select_transport Read of size 4 at addr ffff88800b9bd95c by task python3/197 Call Trace: sctp_outq_select_transport+0x549/0x8b0 [sctp] sctp_outq_flush+0x306/0x2c60 [sctp] sctp_transport_immediate_rtx+0xaf/0x260 [sctp] sctp_process_asconf_ack+0xa48/0xf70 [sctp] Allocated by task 197: sctp_transport_new+0x68/0x650 [sctp] sctp_assoc_add_peer+0x258/0x12a0 [sctp] sctp_process_asconf+0x5e9/0x1090 [sctp] Last potentially related work creation: __call_rcu_common.constprop.0+0x77/0xb70 sctp_assoc_del_nonprimary_peers+0x7c/0xd0 [sctp] sctp_process_asconf+0xd9c/0x1090 [sctp] The first invalid access was a four-byte read of transport->state at net/sctp/outqueue.c:833. The same reproducer completed the full authenticated ASCONF and local-address replacement sequence with this change without a KASAN report or oops. Clear new_transport when its peer is removed, before it can be used to create the HEARTBEAT.

  44. CVE-2026-74585 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Bound the DROM dual link port number before indexing sw->ports tb_drom_parse_entry_port() validates the device-supplied header->index against sw->config.max_port_number before indexing sw->ports[], but the sibling field entry->dual_link_port_nr -- a 6-bit value also read from the DROM -- indexes the same array with no such check. A malicious or malformed Thunderbolt device can set dual_link_port_nr beyond the allocated sw->ports[] (max_port_number + 1 entries), producing an out-of-bounds tb_port pointer that is stored and later dereferenced. Reject a port entry whose dual_link_port_nr exceeds max_port_number, the same bound already applied to header->index.

  45. CVE-2026-4703 9.8 Critique

    westguard WS Form LITE – Drag & Drop Contact Form Builder

    The WS Form LITE – Drag & Drop Contact Form Builder plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 1.10.80 via deserialization of untrusted input from form submission meta values. This makes it possible for unauthenticated attackers to inject a PHP Object. No known POP chain is present in the vulnerable software, which means this vulnerability has no impact unless another plugin or theme containing a POP chain is installed on the site. If a POP chain is present via an additional plugin or theme installed on the target system, it may allow the attacker to perform actions like delete arbitrary files, retrieve sensitive data, or execute code depending on the POP chain present.

  46. CVE-2026-77992 9.5 Critique

    fabrikar.com Fabrik extension for Joomla

    Joomla Extension - fabrikar.com - heredoc terminator breakout in the calc element in Fabrik < 4.7.2 - The onUpdateComment endpoint did not perform any access checks.

  47. CVE-2026-77027 8.6 Élevée

    fabrikar.com Fabrik extension for Joomla

    Joomla Extension - fabrikar.com - Unauthenticated stored XSS in Fabrik < 4.7.2 - The handling of user supplied input in the jsactions feature leads to an stored XSS vector.

  48. CVE-2026-76609 6.9 Moyenne

    fabrikar.com Fabrik extension for Joomla

    Joomla Extension - fabrikar.com - Unauthenticated modification of any comment in Fabrik < 4.7.2 - The onUpdateComment endpoint did not perform any access checks.

  49. CVE-2026-76608 6.9 Moyenne

    fabrikar.com Fabrik extension for Joomla

    Joomla Extension - fabrikar.com - Unauthenticated disclosure of any commenter's email address in Fabrik < 4.7.2 - The onGetEmail endpoint did not perform any access checks.

  50. CVE-2026-76607 10.0 Critique

    fabrikar.com Fabrik extension for Joomla

    Joomla Extension - fabrikar.com - Missing ACL check in download element in Fabrik < 4.7.2.

  51. CVE-2026-76606 10.0 Critique

    fabrikar.com Fabrik extension for Joomla

    Joomla Extension - fabrikar.com - Path Traversal via image element in Fabrik < 4.7.2.

  52. CVE-2026-76605 10.0 Critique

    fabrikar.com Fabrik extension for Joomla

    Joomla Extension - fabrikar.com - Remote code execution via image element in Fabrik < 4.7.2.

  53. CVE-2026-76604 10.0 Critique

    fabrikar.com Fabrik extension for Joomla

    Joomla Extension - fabrikar.com - Unauthenticated remote code execution via PHP form element in Fabrik < 4.7.2 - The PHP form element is vulnerable to the execution of user provided codes.

  54. CVE-2026-76603 6.9 Moyenne

    fabrikar.com Fabrik extension for Joomla

    Joomla Extension - fabrikar.com - Unauthenticated row disclosure via form.inlineedit in Fabrik < 4.7.2 - The inineedit form controller does not perform any access checks, disclosing items to unauthorized users.

  55. CVE-2026-76602 9.3 Critique

    fabrikar.com Fabrik extension for Joomla

    Joomla Extension - fabrikar.com - Unauthenticated SQL injection in ORDER BY in Fabrik < 4.7.2 - The order parameter in list models is used in queries without validation, allowing read SQLi vectors.

  56. CVE-2026-76601 6.9 Moyenne

    fabrikar.com Fabrik extension for Joomla

    Joomla Extension - fabrikar.com - Unauthenticated row reordering in Fabrik < 4.7.2 - The order plugin did not perform any access checks.

  57. CVE-2026-76600 6.9 Moyenne

    fabrikar.com Fabrik extension for Joomla

    Joomla Extension - fabrikar.com - Unauthenticated deletion of any comment in Fabrik < 4.7.2 - The DeleteComment endpoint did not perform any access checks.

  58. CVE-2026-76599 8.7 Élevée

    fabrikar.com Fabrik extension for Joomla

    Joomla Extension - fabrikar.com - Unauthenticated database table list and table-prefix disclosure in Fabrik < 4.7.2 - The ajax_tables method of the elements model allows listings of arbitrary database tables including columns.

  59. CVE-2026-76598 8.7 Élevée

    fabrikar.com Fabrik extension for Joomla

    Joomla Extension - fabrikar.com - Unauthenticated arbitrary directory listing via onAjax_getFolders in Fabrik < 4.7.2 - The onAjax_getFolders method of the elements model allows arbitrary directory listings.

  60. CVE-2026-76597 8.7 Élevée

    fabrikar.com Fabrik extension for Joomla

    Joomla Extension - fabrikar.com - Unauthenticated arbitrary file upload to web root via list email plugin in Fabrik < 4.7.2 - The list email plugin controller allows to upload non-executable files to the webroot.

  61. CVE-2026-76596 8.7 Élevée

    fabrikar.com Fabrik extension for Joomla

    Joomla Extension - fabrikar.com - Unauthenticated table truncation via list.doempty in Fabrik < 4.7.2- The list controllers doemtpy endpoints lacks ACL gates, a plain GET empties the target list's table

  62. CVE-2026-76571 9.3 Critique

    fabrikar.com Fabrik extension for Joomla

    Joomla Extension - fabrikar.com - Unauthenticated SQL injection in list filter condition parameter in Fabrik < 4.7.2 - The condition parameter passed to a list filter is concatenated verbatim into the WHERE clause built by getFilterQuery(). An unauthenticated attacker can supply arbitrary SQL through the filter condition, giving full read of the database.

  63. CVE-2026-74584 7.1 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: zero shared page before exposing to userspace bnxt_re_alloc_ucontext() allocates uctx->shpg via __get_free_page(GFP_KERNEL). The buddy allocator does not zero pages without __GFP_ZERO, so the page contains stale kernel data from whatever object most recently freed it. The page is then mapped into userspace via vm_insert_page() under BNXT_RE_MMAP_SH_PAGE in bnxt_re_mmap(). The driver only ever writes 4 bytes (a u32 AVID) at offset BNXT_RE_AVID_OFFT (0x10) inside bnxt_re_create_ah(); the remaining 4092 bytes of the page are exposed to userspace unsanitised, leaking kernel memory contents. Any user with access to /dev/infiniband/uverbsX on a host with a bnxt_re device (typically rdma group membership) can read this data via a single mmap() at pgoff 0 after IB_USER_VERBS_CMD_GET_CONTEXT. Other shared pages in the same file already use get_zeroed_page() correctly: drivers/infiniband/hw/bnxt_re/ib_verbs.c srq->uctx_srq_page = (void *)get_zeroed_page(GFP_KERNEL); cq->uctx_cq_page = (void *)get_zeroed_page(GFP_KERNEL); uctx->shpg is the only outlier. Bring it in line with the existing convention by switching to get_zeroed_page().

  64. CVE-2026-70626 6.2 Moyenne

    nltk · Nltk nltk

    NLTK versions before 3.9.4 contain a symlink escape vulnerability in CorpusReader.open() that allows local attackers to read arbitrary files outside the corpus root. The vulnerability exists because path validation is lexical and does not account for symlink resolution, enabling attackers to place symlinks inside the corpus root to access files outside the intended boundary.

  65. CVE-2026-6258 – Non évaluée Rejetée

    Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

  66. CVE-2026-68768 6.1 Moyenne

    hashcat

    hashcat contains a heap-based buffer overflow (out-of-bounds write) in the outfile_write() function in src/outfile.c. When assembling output into a fixed-size buffer (HCBUFSIZ_LARGE, ~16 MB), the function sequentially appends the username, separator, hash, and plaintext via memcpy without validating that the accumulated length stays within the buffer capacity. When run with --username --show against a crafted hash file containing an oversized username that nearly fills the buffer, the total assembled output exceeds the buffer, causing a heap buffer overflow that can corrupt memory and crash the process.

  67. CVE-2026-68767 6.1 Moyenne

    hashcat

    hashcat's fgetl() function in src/filehandling.c writes a null terminator one byte past the caller's buffer when an input line is exactly the buffer length. Attackers can trigger this out-of-bounds heap write by providing a hash file, potfile, or wordlist containing a line of exactly HCBUFSIZ_LARGE bytes.

  68. CVE-2026-68766 7.8 Élevée

    hashcat

    hashcat fails to restrict command-line options when parsing restore files, allowing attackers to inject output-redirecting options like --outfile and --potfile-path. Attackers can craft restore files with malicious options to append attacker-controlled content to arbitrary files, enabling code execution when targeting shell startup files.

  69. CVE-2026-66393 7.5 Élevée

    nltk · Nltk nltk

    NLTK versions before 3.9.4 contain an unbounded recursion vulnerability in JSONTaggedDecoder.decode_obj() that allows attackers to cause denial of service by supplying deeply nested JSON structures. Attackers can craft JSON payloads exceeding the recursion limit to trigger an unhandled RecursionError that crashes the Python process.

  70. CVE-2026-65915 6.5 Moyenne

    nltk · Nltk nltk

    NLTK versions before 3.10.0 contain a logic bug in FileSystemPathPointer.open() where the sandbox validation check compares a normalized path against itself, making the security check permanently inert. Attackers can pass file:// URLs to nltk.data.load() to read arbitrary files accessible to the process user, including credentials and configuration files.

  71. CVE-2026-63312 7.5 Élevée

    nltk · Nltk nltk

    NLTK before 3.10.0 contains an arbitrary local file read vulnerability in StreamBackedCorpusView that bypasses pathsec.ENFORCE by calling builtins.open() directly instead of pathsec.open(). Attackers who control the fileid argument can read arbitrary local files regardless of the ENFORCE setting, including sensitive system files and application credentials.

  72. CVE-2026-63311 5.3 Moyenne

    nltk · Nltk nltk

    NLTK before 3.10.0 (affected versions <= 3.9.4) contains a server-side request forgery (SSRF) vulnerability in the validate_network_url() function in nltk/pathsec.py. The _resolve_hostname() helper catches OSError and ValueError during socket.getaddrinfo() and returns an empty list; when DNS resolution fails, the validation loop executes no IP checks and the function fails open, allowing urlopen() to proceed without validation. An attacker who can trigger DNS resolution failures or use DNS rebinding can bypass SSRF protections and reach restricted network resources, including cloud metadata endpoints (e.g., 169.254.169.254).

  73. CVE-2026-63310 – Non évaluée Rejetée

    Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

  74. CVE-2026-62388 7.5 Élevée

    nltk · Nltk nltk

    NLTK versions before 3.10.0 default to ENFORCE=False in pathsec.py, causing all security validation functions to emit warnings instead of raising exceptions. Attackers can bypass path traversal and pickle deserialization protections by exploiting the disabled security controls that are only active when manually enabled.

  75. CVE-2026-62385 7.5 Élevée

    nltk · Nltk nltk

    NLTK versions before 3.10.0 contain a path traversal vulnerability in FramenetCorpusReader and NKJPCorpusReader that allows attackers to parse XML files outside the corpus root by supplying unsafe selectors or poisoned index state. Attackers can exploit frame_by_name, doc, lu, and header methods with crafted parameters to read arbitrary XML files accessible to the application.

  76. CVE-2026-62384 7.5 Élevée

    nltk · Nltk nltk

    NLTK versions before 3.10.2 contain a symlink-based sandbox bypass in FramenetCorpusReader that allows attackers to read arbitrary XML files outside the corpus root. Attackers can place symlinks with names containing no path separators inside the corpus subdirectory, which pass the path validation guard and are resolved to files outside the intended corpus root when accessed via frame_by_name(), _lu_file(), or doc() methods.

  77. CVE-2026-62383 5.5 Moyenne

    nltk · Nltk nltk

    nltk versions before 3.10.2 contain a symlink-based arbitrary file read vulnerability in IPIPANCorpusReader methods that bypass nltk.pathsec validation entirely. Attackers can place a symlink in the corpus root directory and read arbitrary files accessible to the process by calling channels(), domains(), categories(), or fileids() methods with the symlink filename.

  78. CVE-2026-75870 9.1 Critique

    Punk versions before 0.18 for Perl allow session cookie forgery via an empty default HMAC key when a session is declared without a secret. The session keyword freezes its options onto the application as given: it does not require a secret, warn, or refuse to start when one is absent. The cookie read and the write-back both default that key to the empty string, so a declaration with no secret option, or with an undefined or empty one, signs and verifies with a zero-length HMAC-SHA256 key. An attacker who knows the cookie format can then mint one offline carrying any contents the session holds, such as a user identifier or a role. Nothing marks the misconfiguration at runtime: cookies are well formed and sessions round-trip as expected.

  79. CVE-2026-75866 9.1 Critique

    Punk::OAuth2::Server versions through 0.03 for Perl issue access tokens outside a client's registered scopes and grant types because no authorization path reads them. Punk::OAuth2::Server::Store registers scopes and grant_types per client and documents both as client registration. token dispatches on the grant_type in the request body, so a client registered for authorization_code alone can ask for client_credentials, and that arm passes the requested scope straight to the minter, which signs it into the at+jwt access token. authorize copies the query scope into the authorization code record without comparing it against the registration, leaving the optional consent hook as the only check between an arbitrary scope and the issued code. redirect_uris on the same client row is read and enforced. A registered client can obtain a correctly signed token carrying any scope it names, and a resource server running Punk::OAuth2::Checker accepts that token and honours the scope. A client registered without a secret authenticates on its client_id alone, so anyone who knows that identifier can request one.

  80. CVE-2026-71514 3.3 Faible

    nltk · Nltk nltk

    NLTK 3.9.4 through 3.10.2 contains a path traversal vulnerability in CrubadanCorpusReader. _load_lang_ngrams joins the corpus root with crubadan_code, the column-0 value read from the corpus table.txt mapping file, and opens the result with the builtin open() rather than the pathsec-validated opener, so os.path.join discards the root when that value is absolute and the read escapes the corpus directory without the containment check nltk.pathsec applies when ENFORCE is set. An attacker who controls a corpus package can disclose file contents outside the corpus root through lang_freq, limited to paths ending in -3grams.txt whose contents parse as token count lines.

  81. CVE-2026-71513 8.8 Élevée

    nltk · Nltk nltk

    NLTK before 3.10.3 contains a remote code execution vulnerability in AllowlistUnpickler that validates only the pickle module string and not the global name, allowing attackers to resolve dotted names by attribute traversal to callables outside the allowlisted namespace. Attackers can craft untrusted transition-parser models that execute arbitrary commands when TransitionParser.parse loads the model through allowlisted_pickle_load.

  82. CVE-2026-68769 – Non évaluée Rejetée

    Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

  83. CVE-2026-5093 4.3 Moyenne

    wpsoul Greenshift – animation and page builder blocks

    The GreenShift – Animation and Page Builder Blocks plugin for WordPress is vulnerable to unauthorized modification of data in versions up to, and including, 12.8.9. This is due to a missing capability check on the 'gspb_update_global_wp_settings' function that only verifies the 'edit_posts' capability instead of requiring administrative privileges. This makes it possible for authenticated attackers, with contributor-level access and above, to modify global WordPress theme color settings site-wide, leading to site defacement.

  84. CVE-2026-4561 6.4 Moyenne

    dvankooten MC4WP: Mailchimp for WordPress

    The MC4WP: Mailchimp for WordPress plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the form response message post meta fields (e.g., 'text_subscribed', 'text_error') in all versions up to, and including, 4.12.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

  85. CVE-2026-4559 6.4 Moyenne

    wpchill Image Photo Gallery Final Tiles Grid

    The Image Photo Gallery Final Tiles Grid plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'delay' shortcode attribute in all versions up to, and including, 3.6.12 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

  86. CVE-2026-2996 7.5 Élevée

    maartenbelmans Advanced Product Fields (Product Addons) for WooCommerce

    The Advanced Product Fields (Product Addons) for WooCommerce plugin for WordPress is vulnerable to Improper Input Validation in all versions up to, and including, 1.6.21. This is due to a logic flaw in the 'validate_cart_data' function. This makes it possible for unauthenticated attackers to bypass required paid addons and complete purchases at the base product price only, effectively stealing products by paying a fraction of the intended total. The vulnerability was partially patched in version 1.6.19.

  87. CVE-2026-62382 6.9 Moyenne

    pglombardo PasswordPusher

    PasswordPusher versions v1.45.11 through v2.9.5 contain an improper authorization vulnerability in the push deletion logic. The ownership check compares @push.user against current_user; for an anonymously created push both values are nil, and Ruby evaluates nil == nil as true, so the check passes and the deletable_by_viewer restriction is never enforced. An attacker who knows only the secret URL can permanently delete an anonymous push even when the creator disabled viewer deletion and even without the passphrase. Only deployments that allow anonymous pushes (the default) are affected. The issue is fixed in v2.9.6.

  88. CVE-2026-62381 6.6 Moyenne

    openwrt luci

    luci-lib-px5g (LuCI) contains a heap-based buffer overflow in the native ASN.1 encoding routine asn1_add_obj (x509write.c) when signing a certificate with a 2040-bit RSA key. For a 255-byte signature, the BIT STRING allocation is computed from the DER length encoding of 255 bytes, but the payload written after prepending the unused-bits byte is 256 bytes, requiring one additional DER length octet. As a result the allocation is 259 bytes while the tag, length, unused-bits byte, and signature require 260 bytes, and the final memcpy writes one byte beyond the heap buffer. The overflow is reachable through the exported Lua interface via create_selfsigned(); whether it is remotely exploitable depends on the embedding application. The vulnerable code is present on the openwrt-18.06 through openwrt-25.12 release branches and is absent from master, where the luci-lib-px5g package has been removed rather than patched.

  89. CVE-2026-62380 7.5 Élevée

    netty · Netty netty

    Netty (io.netty:netty-codec-socks) versions 4.2.0.Final through 4.2.16.Final and 4.1.x through 4.1.136.Final contain null byte, CRLF, and credential injection vulnerabilities in the SOCKS4 (Socks4ClientEncoder) and SOCKS5 (Socks5ClientEncoder) client encoders, which fail to validate domain address and authentication (username/password) fields. An attacker able to control these fields can inject null bytes or CRLF characters to truncate or alter values, potentially enabling domain spoofing, SOCKS4 userid truncation, authentication data injection, and protocol confusion. Fixed in 4.2.17.Final and 4.1.137.Final.

  90. CVE-2026-62243 7.5 Élevée

    netty

    Netty (io.netty:netty-handler) versions from 4.2.0.Final through 4.2.16.Final and versions through 4.1.136.Final disable TLS hostname verification on the SslProvider.OPENSSL client path when a plain (non-extended) X509TrustManager is used and Unsafe-based trust-manager wrapping is unavailable (Java 25+). In this configuration the OpenSSL client does not perform hostname verification, allowing a man-in-the-middle attacker to present a certificate issued for a different hostname that is accepted without validation. Fixed in 4.2.17.Final and 4.1.137.Final.

  91. CVE-2026-62204 6.6 Moyenne

    siyuan-note siyuan

    SiYuan versions before v3.7.4 fail to validate that packageName matches the downloaded package content in bazaar install endpoints. Attackers with same-origin access can overwrite existing trusted plugins by supplying mismatched packageName and repoURL parameters, achieving persistence across application restarts.

  92. CVE-2026-60084 8.7 Élevée

    siyuan-note siyuan

    SiYuan versions before v3.7.4 contain an arbitrary file deletion vulnerability in the /api/search/removeTemplate endpoint that accepts an unvalidated path parameter passed directly to os.RemoveAll. Authenticated admin attackers can supply absolute filesystem paths to recursively delete any file or directory the kernel process has permission to remove, anywhere on the host filesystem.

  93. CVE-2026-60083 4.9 Moyenne

    siyuan-note siyuan

    SiYuan versions before v3.8.0 contain an incomplete path blocklist in the MCP file tool that fails to restrict access to sensitive workspace files protected by the HTTP API. Authenticated administrators can read plaintext publish-mode passwords from data/.siyuan/publishAccess.json and access other sensitive files like data/templates and data/snippets/conf.json.

  94. CVE-2026-59809 4.9 Moyenne

    siyuan-note siyuan

    SiYuan before v3.8.0 interpolates secret placeholders into the destination URL parameter of the http_request MCP tool, allowing attackers to exfiltrate stored secrets. An MCP client can craft a request with an attacker-controlled URL containing secret placeholders to send plaintext secret values to any public host without confirmation.

  95. CVE-2026-59808 8.8 Élevée

    WWBN AVideo

    AVideo through commit 9c39d8c8 contains an authentication bypass vulnerability where deduplicateByEncoderQueueId() returns video_id_hash credentials for any video by encoder_queue_id without ownership verification, and useVideoHashOrLogin() converts this hash into passwordless login as the video owner. Attackers with upload permission can retrieve an administrator's video_id_hash by omitting the videos_id parameter, then use that hash in an unauthenticated request to gain administrative session access and modify system configuration.

  96. CVE-2026-59256 7.5 Élevée

    WWBN AVideo

    WWBN AVideo through commit 9c39d8c8 contains an authorization bypass vulnerability where getToken() creates tokens without binding to user identity or purpose, and plugin/Gallery/view/sections.php issues valid tokens to unauthenticated visitors. Attackers can retrieve a token from the Gallery endpoint and use it to bypass authorization checks in other subsystems like view/hls.php to access restricted video content.

  97. CVE-2026-58003 7.1 Élevée

    WWBN AVideo

    WWBN AVideo through commit 9c39d8c8 contains a cross-site request forgery vulnerability in the releaseVideoNow.json.php endpoint that lacks authenticity checks and accepts GET requests. Attackers can craft a malicious cross-site GET request carrying an administrator's session cookie to permanently publish any embargoed video by manipulating the videos_id parameter.

  98. CVE-2026-58002 6.5 Moyenne

    WWBN AVideo

    WWBN AVideo through commit 9c39d8c8b4c1f75540788d6b391740852ceb0732 contains an authorization bypass vulnerability in the Users_affiliations add.json.php endpoint that allows authenticated users to forge two-party consent records by supplying the counterparty's agreement timestamp. Attackers can create a forged affiliation with status='a' and then reassign video ownership to arbitrary users through the videoAddNew.json.php endpoint, which trusts the forged affiliation as an authorization term.

  99. CVE-2026-58001 5.7 Moyenne

    WWBN AVideo

    WWBN AVideo through commit 9c39d8c8 contains a cross-site request forgery vulnerability in objects/videoEditLight.php that lacks request authenticity checks and accepts GET requests. Attackers can store an img tag in a video description that transfers video ownership to an attacker-controlled account when an administrator views the video page.

  100. CVE-2026-57998 7.8 Élevée

    jeemok better-npm-audit

    better-npm-audit through 3.11.0, and the 4.0.0-rc.2 prerelease, builds its npm audit command by interpolating the user-supplied --registry option into a command string in src/handlers/handleInput.ts without validation or quoting, then passes that string to child_process.exec() in index.ts, which spawns a shell. A registry value containing shell metacharacters such as a semicolon, pipe, or command substitution executes arbitrary operating system commands with the privileges of the process running the audit.

  101. CVE-2026-57944 5.4 Moyenne

    WWBN AVideo

    AVideo through commit 9c39d8c8 contains a cross-site request forgery vulnerability in channelToGallery.json.php that allows attackers to modify site-wide Gallery configuration by performing unauthorized writes to plugin data. Attackers can craft a cross-site GET request carrying an administrator's session cookie to promote arbitrary channels to the front page or delete curated sections without token validation.

  102. CVE-2026-56380 5.3 Moyenne

    WWBN AVideo

    AVideo through commit 9c39d8c8 contains an information exposure vulnerability in feed/index.php that allows unauthenticated attackers to retrieve channel owner email addresses by supplying a public channel name parameter. Attackers can enumerate all creator email addresses by iterating through public channel names and extract them from the itunes:email and itunes:author RSS elements, enabling account takeover attempts and phishing campaigns.

  103. CVE-2026-4244 4.3 Moyenne

    metaphorcreations Post Duplicator

    The Post Duplicator plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the `duplicate_post()` function in all versions up to, and including, 3.0.11. This is due to the function not verifying that the user has `edit_others_posts` capability before accepting a `selectedAuthorId` parameter via the `duplicate-post` REST endpoint. This makes it possible for authenticated attackers, with Contributor-level access and above, to create duplicated posts attributed to any user, including administrators.

  104. CVE-2026-11948 – Non évaluée Rejetée

    Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

  105. CVE-2026-11947 – Non évaluée Rejetée

    Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

  106. CVE-2026-77988 6.6 Moyenne

    TRENDnet TEW-823DRU

    A weakness has been identified in TRENDnet TEW-823DRU 1.1.02b01. This vulnerability affects the function nvram_get of the component CLI Configuration Tool. This manipulation causes command injection. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks.

  107. CVE-2026-66917 8.6 Élevée

    joomgalleryfriends.net JoomGallery extension for Joomla

    Joomla Extension - joomgalleryfriends.net - Stored XSS in JoomGallery < 4.4.0 - An authenticated, privileged can store an XSS payload in any image causing JS execution in every visitor's browser.

  108. CVE-2026-66916 6.9 Moyenne

    joomgalleryfriends.net JoomGallery extension for Joomla

    Joomla Extension - joomgalleryfriends.net - Password-Protected Category Bypass via JSON Format in JoomGallery < 4.4.0- An unauthenticated access control bypass exists in JoomGallery's category JSON view. When a gallery category is protected with a password, the HTML view correctly enforces the password gate - but the JSON view ( format=json ) skips this check entirely.

  109. CVE-2026-4245 4.3 Moyenne

    metaphorcreations Post Duplicator

    The Post Duplicator plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 3.0.11. This is due to the `duplicate_post_permissions()` permission callback only verifying the `duplicate_posts` capability without checking whether the requesting user holds `publish_posts` or other status-gated capabilities. This makes it possible for authenticated attackers, with Contributor-level access and above, to create duplicate posts with `future` (scheduled, auto-publishes) or `private` status, bypassing editorial review. Additionally, the REST endpoint does not enforce administrator-configured post-type duplication restrictions, allowing duplication of post types that have been explicitly disabled.

  110. CVE-2026-3424 5.3 Moyenne

    properfraction kk Star Ratings – Rate Post & Collect User Feedbacks

    The The kk Star Ratings – Rate Post & Collect User Feedbacks plugin for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 5.4.10.3. This is due to the software allowing users to execute an action that does not properly validate the 'payload' value before running do_shortcode. This makes it possible for unauthenticated attackers to execute arbitrary shortcodes.

  111. CVE-2026-77946 10.0 Critique

    TRENDnet TEW-821DAP

    A vulnerability was determined in TRENDnet TEW-821DAP 2.2.01b05. Affected by this vulnerability is the function uci_safe_get of the file /cgi-bin/apply_time.cgi of the component NTP Timezone Configuration Handler. Executing a manipulation of the argument system.ntp.server/system.ntp.enable_server/cameo.time.time_zone/cameo.cameo.syslog_server can lead to stack-based buffer overflow. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized.

  112. CVE-2026-77945 7.4 Élevée

    TRENDnet TEW-821DAP

    A vulnerability was found in TRENDnet TEW-821DAP 2.2.01b05. Affected is an unknown function of the file /cgi-bin/upload.cgi of the component ssi. Performing a manipulation of the argument filename results in command injection. The attack may be initiated remotely. The exploit has been made public and could be used.

  113. CVE-2026-78003 9.8 Critique

    Mailgun for WordPress

    The Mailgun for WordPress plugin for WordPress is vulnerable to Server-Side Request Forgery (SSRF) via path traversal in versions up to and including 2.2.0. This is due to insufficient input validation in the add_list() function, which accepts user-controlled array keys from $_POST['addresses'], passes them through sanitize_text_field(). This makes it possible for unauthenticated attackers to make authenticated POST requests to any Mailgun API endpoint using the WordPress site's API key, including creating inbound email-forwarding routes that can intercept password reset emails, leading to administrator account takeover.

  114. CVE-2026-12710 9.3 Critique

    Google Cloud Application Integration

    A Missing Authorization vulnerability in the QueryEngineTask of Google Cloud Application Integration (versions from 2025-04-28 to 2026-04-04) allows an external attacker to access sensitive internal data. The issue was patched on April 4, 2026; no customer action is required.

  115. CVE-2026-77002 9.8 Critique

    Unknown SmilePass Selfie Login

    The SmilePass Selfie Login WordPress plugin through 1.0.2 does not perform any server-side verification of the identity it is asked to authenticate, allowing unauthenticated users to log in as any registered account, including administrators.

  116. CVE-2026-77001 9.8 Critique

    Unknown Social Login & Sharing buttons with Analytics By SoClever

    The Social Login & Sharing buttons with Analytics By SoClever WordPress plugin through 1.2.0 does not perform any authentication, authorisation or nonce checks in one of its publicly accessible login handlers, allowing unauthenticated attackers to obtain a valid session as any existing user, including administrators. In the default case a session as the site's original administrator account is obtained without needing to know any account details at all.

  117. CVE-2026-77000 9.8 Critique

    Unknown WP Social Media Login

    The WP Social Media Login WordPress plugin through 1.0.6 does not verify that a social login was actually completed with the identity provider before authenticating a visitor, allowing unauthenticated attackers to log in as any existing user, including administrators, by supplying that user's email address.

  118. CVE-2026-76793 8.1 Élevée

    Unknown Firebase Authentication

    The Firebase Authentication WordPress plugin before 1.7.1 does not require the email address in an authentication token to be verified before matching it to a WordPress account and issuing a session, allowing unauthenticated attackers to log in as any user, including administrators.

  119. CVE-2026-76789 8.8 Élevée

    Unknown Slider Hero with Video Background, Animation

    The Slider Hero with Video Background, Animation WordPress plugin before 9.1.3 does not have authorisation and nonce checks on two of its request handlers, and does not escape a stored setting before outputting it, allowing unauthenticated users to store malicious JavaScript which will be executed in the context of an administrator viewing the Slider Hero with Video Background, Animation WordPress plugin before 9.1.3's admin area, as well as any visitor of a page embedding a slider.

  120. CVE-2026-19222 6.6 Moyenne

    Unknown Forminator Forms

    The Forminator Forms WordPress plugin before 1.57.0.7 does not consistently enforce the role restriction it applies to registration forms, allowing users who are permitted to build forms to configure one that assigns the administrator role to any visitor who registers through it.

  121. CVE-2026-19221 7.2 Élevée

    Unknown Forminator Forms

    The Forminator Forms WordPress plugin before 1.57.0.5 does not restrict a network-wide setting to network administrators, allowing an administrator of any single site on a multisite network to execute arbitrary code across the entire network.

  122. CVE-2026-19093 6.8 Moyenne

    Unknown Tutor LMS

    The Tutor LMS WordPress plugin before 4.0.6 does not validate a stored file path before using it to stream media, allowing users with the instructor role to read arbitrary files on the server, including files outside the web root. The readable files include the WordPress configuration file, which exposes the database credentials and the authentication keys and salts, so authentication cookies can be forged.

  123. CVE-2026-18052 8.1 Élevée

    Unknown ManageWP Worker

    The ManageWP Worker WordPress plugin before 4.9.37 does not bind the account being logged in to the signature which authorises the login, nor prevent an already used login link from being replayed, allowing attackers who obtain such a link to gain a session as any user on the site, including an administrator.

  124. CVE-2026-16738 5.3 Moyenne

    Unknown Conekta Payment Gateway

    The Conekta Payment Gateway WordPress plugin before 6.2.2 does not verify the authenticity of incoming payment gateway webhook notifications, nor bind the confirmed payment to the targeted order or verify its amount, allowing unauthenticated attackers to mark arbitrary orders as paid without payment.

  125. CVE-2026-16612 5.3 Moyenne

    Unknown FiboSearch

    The FiboSearch WordPress plugin before 1.34.1 does not consistently exclude password-protected products from its unauthenticated AJAX endpoints, allowing unauthenticated users to disclose and enumerate password-protected products and their metadata without entering the product password. Two endpoints are affected: the autocomplete search endpoint (dgwt_wcas_ajax_search) and the Details Panel endpoint (dgwt_wcas_result_details) when queried for taxonomy details.

  126. CVE-2026-16260 6.8 Moyenne

    Unknown Post Grid, Slider & Carousel Ultimate

    The Post Grid, Slider & Carousel Ultimate WordPress plugin before 1.8.1 does not sanitise and escape one of its custom post type settings before outputting it in an HTML attribute on the admin edit screen, allowing users with the Contributor role and above to inject JavaScript that executes in the session of any administrator who opens the affected item.

  127. CVE-2026-14187 2.7 Faible

    Unknown Tutor LMS

    The Tutor LMS WordPress plugin before 4.0.6 does not enforce per-object ownership checks on its course content type, allowing any user with the instructor role to read the content of private courses belonging to other instructors.

  128. CVE-2026-76074 4.3 Moyenne

    rubengc AutomatorWP – Automator plugin for no-code automations, webhooks & custom integrations in WordPress

    The AutomatorWP – Automator plugin for no-code automations, webhooks & custom integrations in WordPress plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 5.8.4. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to retrieve the site's configured Campaign Monitor mailing list catalog, including all list IDs and names, that should be restricted to users with the plugin's manager capability. The required nonce is emitted unconditionally on every WordPress admin page via wp_localize_script, meaning any subscriber visiting /wp-admin/profile.php can obtain it without any elevated access.

  129. CVE-2026-76057 4.3 Moyenne

    rubengc AutomatorWP – Automator plugin for no-code automations, webhooks & custom integrations in WordPress

    The AutomatorWP – Automator plugin for no-code automations, webhooks & custom integrations in WordPress plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 5.8.4. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to retrieve all ConvertKit form data configured by the site's manager account, exposing integration details intended to be restricted to plugin managers. The required nonce is localized on every admin page load, making it accessible to any authenticated user who can reach /wp-admin.

  130. CVE-2026-75027 5.3 Moyenne

    themifyme Themify Builder

    The Themify Builder plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 7.8.0. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to modify the stored Themify Builder styling data (padding and margin properties) of arbitrary posts, including private and draft posts, by supplying an attacker-controlled post ID and JSON styling payload. The nonce required by the handler is automatically emitted to all frontend pages rendered by the builder via wp_localize_script, meaning any unauthenticated visitor can trivially retrieve a valid nonce from page source and satisfy the only access control in place.

  131. CVE-2026-19883 8.8 Élevée

    etruel WPeMatico RSS Feed Fetcher

    The WPeMatico RSS Feed Fetcher plugin for WordPress is vulnerable to unauthorized modification of data that can lead to privilege escalation due to a missing capability check on the wpematico_import_settings function in all versions up to, and including, 2.8.24. This makes it possible for authenticated attackers, with subscriber-level access and above, to update arbitrary options on the WordPress site. This can be leveraged to update the default role for registration to administrator and enable user registration for attackers to gain administrative user access.

  132. CVE-2026-77781 7.5 Élevée

    Tie::Hash::Regex versions before 2.0.0 for Perl will throw an exception on unparseable lookup keys. The FETCH, EXISTS and DELETE methods throw an exception when on malformed regular expressions. Each method falls back to a regex match when the key is not already stored in the hash, compiling the caller's key with a bare qr// and no eval guard. A key that is not a valid regular expression pattern, such as a single unmatched bracket, dies. An application that looks up externally supplied strings in a tied hash will die on an invalid key.

  133. CVE-2026-9052 – Non évaluée Rejetée

    Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

  134. CVE-2026-76069 – Non évaluée Rejetée

    Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

  135. CVE-2026-73323 – Non évaluée Rejetée

    Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

  136. CVE-2026-53541 4.3 Moyenne

    OliveTin

    OliveTin gives access to predefined shell commands from a web interface. The `filterToDefinedArgumentsOnly` function in the executor is intended to discard any arguments not explicitly defined in the action's configuration. However, prior to commit ebffd9f040f791208aee1db2e5a8aecd1e3e603d, a special case allows any argument whose name starts with `ot_` to bypass this filter. While two system arguments (`ot_executionTrackingId` and `ot_username`) are injected by OliveTin and overridden, all other `ot_`-prefixed arguments supplied by the user pass through unmodified. These bypassed arguments are not type-checked — the validation loop only iterates over the action's defined arguments, so `ot_`-prefixed arguments skip all type safety checks entirely; set as environment variables — via `buildEnv()`, with completely unvalidated values, and passed to the executed command; and included in the template context — available as `.Arguments.ot_*` in template rendering. Commit ebffd9f040f791208aee1db2e5a8aecd1e3e603d contains a patch.

  137. CVE-2026-53525 7.4 Élevée

    weechat

    WeeChat (Wee Enhanced Environment for Chat) is a free chat client. In versions 0.3.1 through 4.9.0, the WeeChat relay authentication uses non-constant-time string comparison functions (weechat_strcasecmp and strcmp) to verify password hashes and plaintext passwords. An attacker can exploit timing differences to extract the server-computed hash character by character, then authenticate using the correct hash without knowing the password. Version 4.9.1 fixes the issue.

  138. CVE-2026-53524 6.5 Moyenne

    weechat

    WeeChat (Wee Enhanced Environment for Chat) is a free chat client. In versions 4.3.0 through 4.9.0, the WeeChat relay module's WebSocket permessage-deflate decompression function relay_websocket_inflate() has no upper bound on output size. An authenticated relay user can send a small compressed WebSocket frame (~100 bytes) that decompresses to gigabytes, exhausting all server memory and crashing the entire WeeChat process. The api protocol enables permessage-deflate and requires authentication before WebSocket upgrade. Version 4.9.1 patches the issue.

  139. CVE-2026-53499 7.2 Élevée

    NICMx FORT-validator

    FORT Validator is a Resource Public Key Infrastructure (RPKI) relying-party validator that produces validated route-origin data. FORT Validator versions through 1.6.7 contain an origin-validation error in their RRDP processing: a delegated CA under the same Trust Anchor Locator (TAL) can reference a victim CA’s public RRDP notification and snapshot URLs, causing FORT’s URL-based download cache to report success after deleting the victim’s local snapshot. Following a routine victim publication, this can silently remove the victim’s VRPs and other signed objects from FORT’s output, potentially enabling route hijacking or loss of reachability. Version 1.6.8 contains a patch that rejects cross-origin RRDP snapshot and delta URLs; as a workaround, administrators can disable HTTP/RRDP with  --http.enabled=false  while keeping rsync enabled, although this can leave data unavailable or stale where rsync is not supported.

  140. CVE-2026-49360 7.8 Élevée

    DataRecce recce

    Recce is a data-validation toolkit for enhanced dbt (data build tool) PR review. Prior to version 1.50.0, OSS server deployments that expose the server to an untrusted network without authentication are vulnerable to unauthenticated SQL execution through the query run API. When Recce is configured with a DuckDB-backed project, an attacker can use DuckDB filesystem primitives to read and write files accessible to the Recce server process. The impact depends on how Recce is deployed, but may include disclosure of local files, tampering with Recce/dbt artifacts, modification of browser-served static files leading to stored XSS, and modification of application files if those paths are writable. If Recce is run as root, file access occurs with root privileges inside that host or container. This issue has been patched in Recce `v1.50.0`. Users should upgrade to Recce `v1.50.0` or later. The patch restricts unsafe file read/write behavior for DuckDB-backed query execution and hardens the affected query path. Other warehouse adapters have also been reviewed for similar exposure. Users who cannot upgrade immediately should avoid exposing `recce server` to the public internet or any untrusted network. Recommended mitigations include enabling authentication or placing Recce behind an authenticated reverse proxy/VPN, running Recce as a non-root user, using a read-only application filesystem where possible, and ensuring that sensitive files or credentials are not available to the Recce process.

  141. CVE-2026-48106 8.3 Élevée

    Basekick-Labs arc

    Arc is an open, SQL-native time-series database for telemetry. Prior to version 26.06.1, Arc Enterprise's cluster replication receiver at `internal/cluster/replication/receiver.go` validates only the wire-format envelope (length, opcode) of inbound messages. The `MsgReplicateSync` payload itself is accepted without any application-layer authentication — no HMAC, no signature, no per-message nonce. The replication stream is protected at the transport layer by TLS / mTLS, but there is no protection against application-layer message tampering or replay once a peer is on the cluster network. This is fixed in 2026.06.1. Some workarounds are available. Restrict cluster network access to known-trusted peers via strict firewall rules, audit replication logs for unexpected `MsgReplicateSync` traffic, and/or disable cluster mode until the fix is available.

  142. CVE-2026-48105 8.3 Élevée

    Basekick-Labs arc

    Arc is an open, SQL-native time-series database for telemetry. Prior to version 26.06.1, Arc Enterprise's Raft FSM (`internal/cluster/raft/fsm.go:applyRegisterFile`) accepts attacker-chosen file paths in manifest-registration proposals without validating them against the configured storage backend. The only check is that the path is non-empty. There is no parent-traversal (`..`) rejection, no allowlist of legitimate prefixes, no scheme restriction (`s3://` vs local), and no length bound. This is fixed in 2026.06.1. Some workarounds are available. Restrict cluster network access to known-trusted peers via strict firewall rules, audit the cluster manifest for unexpected paths (any path not matching the configured storage backend root is suspect), and/or disable cluster mode until the fix is available.

  143. CVE-2026-48050 8.8 Élevée

    Basekick-Labs arc

    Arc is an open, SQL-native time-series database for telemetry. Versions prior to 26.06.1 register Go's `net/http/pprof` handlers at `/debug/pprof/*` via `app.Use(pprof.New())` in `internal/api/server.go`, and `/debug/pprof` is added to `PublicPrefixes` in `cmd/arc/main.go`. The auth middleware short-circuits before the token check on prefix match, so the endpoints are reachable without any authentication. Version 26.06.1 contains a patch. Some workarounds are available. Block `/debug/pprof*` at a reverse proxy / load balancer in front of Arc, restrict Arc's API port to known-trusted networks via firewall rules, and/or patch the running build: comment out `app.Use(pprof.New())` in `internal/api/server.go` and rebuild.

  144. CVE-2026-47735 7.1 Élevée

    Basekick-Labs arc

    Arc is an open, SQL-native time-series database for telemetry. Prior to version 26.06.1, Arc's user-SQL validator (`internal/api/query.go:ValidateSQLRequest`) blocked only `read_parquet(` and `arc_partition_agg(` via regex denylist. The broader DuckDB I/O function family — `read_csv_auto`, `read_csv`, `read_json`, `read_json_auto`, `read_text`, `read_blob`, `glob`, `parquet_metadata`, `parquet_schema`, `read_xlsx`, etc. — was not blocked. RBAC table-reference extraction inspected only `FROM`/`JOIN` clauses, so scalar table functions in the `SELECT` list slipped past both layers. This is fixed in 2026.06.1 via a structural sandbox at the DuckDB layer. After lockdown, DuckDB refuses to open any file outside the allowlist and refuses further `INSTALL`/`LOAD`. Already-loaded extensions remain callable. Some workarounds are available. Restrict API access to known-trusted networks via firewall rules or, as a temporary mitigation, add `read_csv*`/`read_json*`/`glob` etc. to `dangerousSQLPattern` in `internal/api/query.go`.

  145. CVE-2026-34949 6.5 Moyenne

    Combodo iTop

    Combodo iTop is a web based IT service management tool.Prior to 3.2.3, an unauthenticated user could delete the .readonly file on iTop instances — a file created during the setup process that prevents users from performing write actions. This issue has been fixed in version 3.2.3.

  146. CVE-2026-34948 7.7 Élevée

    Combodo iTop

    Combodo iTop is a web based IT service management tool. Prior to 3.2.3, only classes present in the SELECT clause are protected by the silos access check in OQL. This issue has been fixed in version 3.2.3.

  147. CVE-2026-11805 – Non évaluée Rejetée

    Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

  148. CVE-2026-11615 – Non évaluée Rejetée

    Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

  149. CVE-2026-11609 – Non évaluée Rejetée

    Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

  150. CVE-2026-11418 – Non évaluée Rejetée

    Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.