Semaine du 3 août au 9 août 2026
75 CVE
-
CVE-2026-19361 3.7 Faible
macrozheng mall
A flaw has been found in macrozheng mall 0504e86. This vulnerability affects unknown code of the file /sso/getAuthCode of the component mall-portal Module. Executing a manipulation can lead to weak password recovery. The attack may be launched remotely. This attack is characterized by high complexity. It is stated that the exploitability is difficult. The exploit has been published and may be used. The vendor deleted the GitHub issue for this vulnerability without any explanation. Afterwards the vendor was contacted early about this disclosure via email but did not respond in any way.
-
CVE-2026-19282 5.3 Moyenne
andreahaku llm_memory_mcp
A weakness has been identified in andreahaku llm_memory_mcp up to f11dc8bcff3ff8cf943a2945f99ff3b0bdc8a6d0. This impacts the function auto.capture of the file src/autolearn/GitHooksManager.ts of the component llm_memory_mcp. Executing a manipulation of the argument hash can lead to command injection. The attack is restricted to local execution. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The project was informed of the problem early through an issue report but has not responded yet.
-
CVE-2026-19266 5.5 Moyenne
Kirachon context-engine
A vulnerability was determined in Kirachon context-engine up to 1.9.0. This affects the function execGitCommand of the file src/mcp/utils/gitUtils.ts of the component review-git-diff Endpoint. Executing a manipulation of the argument args can lead to command injection. Upgrading to version 1.9.1 mitigates this issue. This patch is called e0729dcfd3a2b1682a7bff86e7174852c03419ba. It is advisable to upgrade the affected component.
-
CVE-2026-8798 8.7 Élevée
Legion of the Bouncy Castle Inc. BC-FJA
In Bouncy Castle for Java FIPS (BC-FJA) before bc-fips 2.1.3, the native entropy source used on Intel platforms retried the CPU entropy instructions without any bound. RDSEED and RDRAND report failure through their carry flag, and the JNI seeding routine spun re-issuing the instruction for as long as that flag stayed clear, so a persistent failure of the on-chip entropy source - whether from a hardware fault, from the underlying DRBG being exhausted by contention across many cores, or from a hypervisor that does not provide the instruction - left the calling thread looping indefinitely inside the JNI call, where it could be neither interrupted nor timed out. Any operation drawing from the native entropy source could therefore hang, denying service to the application. The retry loops are now bounded (200 attempts for RDSEED and 20 for RDRAND, twice the baselines given in Intel's Digital Random Number Generator software implementation guide), pausing between attempts and, on exhaustion, clearing any partially written buffer and throwing rather than continuing to spin. The clear is performed by an un-elidable memzero, which uses a volatile pointer and an assembly memory barrier so that a compiler cannot optimise the erase away as a dead store. Bouncy Castle for Java (bcprov) is not affected, as it has no native entropy source; the 1.0.X and 2.0.X FIPS series are not affected.
-
CVE-2026-52880 7.5 Élevée
klever-io klever-go
Klever-Go is the Go implementation of the Klever blockchain protocol. Versions from 1.7.14 through 1.7.17 are vulnerable to a remotely triggerable denial of service. Both REST APIs are started with the Gin Engine.Run convenience method, which serves requests through Go's default HTTP server with no ReadHeaderTimeout, ReadTimeout, or MaxHeaderBytes configured. As a result, incoming connections that never complete their request headers are held open indefinitely. When a REST listener is reachable beyond localhost through the documented all-interface bind or a Docker port-publish deployment, a single unauthenticated client can open many slow-header connections and hold them open until server file descriptors are exhausted, preventing the API from accepting new connections. This renders the REST API unavailable to legitimate clients. This issue is fixed in version 1.7.18.
-
CVE-2026-52879 7.5 Élevée
klever-io klever-go
Klever-Go is the Go implementation of the Klever blockchain protocol. In versions 1.7.14 through 1.7.17, the direct-message ingress handler spawns a new goroutine for every incoming direct message before the processor-level antiflood layer makes any admission decision, with no semaphore, throttler, or bound on the number of concurrent in-flight spawns. Because the antiflood check runs inside the spawned goroutine rather than before it, a single connected peer can open a direct-send stream and send a stream of well-formed messages to force unbounded goroutine creation, where each goroutine allocates its own stack and holds a message reference until processing completes, adding scheduler and garbage-collection pressure faster than the runtime can drain it. This lets one peer degrade the node's availability and its ability to process legitimate traffic, resulting in a remotely triggerable denial of service. The issue is fixed in 1.7.18.
-
CVE-2026-48026 8.7 Élevée
treeverse lakeFS · treeverse lakeFS-enterprise
lakeFS is an open-source tool that transforms object storage into a Git-like repositories. Prior to version 1.81.1 of the open source edition and 1.84.0 of the enterprise edition, lakeFS Web UI renders markdown files from repository objects without sanitizing the resulting HTML. A user with write access to any repository branch can commit a `.md` object containing arbitrary HTML/JavaScript. Any other user who opens that object, or who navigates to a repository or directory containing a malicious `README.md`, executes the attacker-supplied script in their own authenticated session. lakeFS fixes the issue in v1.81.1 and lakeFS Enterprise fixes the issue in in v1.84.0. Enterprise customers using older versions can temporarily disable Markdown rendering by adding YAML to their config. No workaround exists for OSS release. Users are advised to upgrade to the latest version for both lakeFS and lakeFS-Enterprise.
-
CVE-2026-66061 7.1 Élevée
home-assistant core
Home Assistant is open source home automation software focused on local control and privacy. Prior to 2026.5.0, the iOS Companion app treats tag links (NFC or QR) delivered through an OS-level routing mechanism such as iOS universal links as if they were physically scanned, without validating the calling app or prompting the user. As a result, any untrusted app on the device can forward an arbitrary tag to Home Assistant, causing it to execute the associated automation as though a legitimate user had scanned an authorized tag. This allows silent, unattended automation execution by untrusted local callers. This issue has been fixed in version 2026.5.0.
-
CVE-2026-66060 7.1 Élevée
home-assistant core
Home Assistant is open source home automation software focused on local control and privacy. Prior to 2026.5.3, the Companion app treats tag links (NFC or QR) delivered through an OS-level routing mechanism as if they were physically scanned, without validating the calling app or prompting the user. As a result, any untrusted app on the device can forward an arbitrary tag to Home Assistant, causing it to execute the associated automation as though a legitimate user had scanned an authorized tag. This allows silent, unattended automation execution by untrusted local callers. This issue is fixed in version 2026.8.1.
-
CVE-2026-59717 4.3 Moyenne
home-assistant core
Home Assistant is open source home automation software focused on local control and privacy. Prior to 2026.6.1, the Android Companion app is vulnerable to an open redirect. The app passes the URL fragment from a homeassistant://invite deep link into the onboarding flow without ever displaying the destination hostname. Because no screen in the invitation or onboarding flow shows the parsed server URL before onboarding commits to it, a victim has no way to distinguish a legitimate invite from a malicious one. An attacker can craft an invite so that a single tap on the legitimate-looking "Connect to my Home Assistant server" button opens their /auth/authorize endpoint in the URL-less onboarding WebView, presenting a look-alike login page that captures the victim's credentials. Since invitations are intended to onboard brand-new users, targets are especially unlikely to notice the substitution. This issue is fixed in version 2026.6.1.
-
CVE-2026-15972 7.5 Élevée
HashiCorp Consul · HashiCorp Consul Enterprise
Consul Community Edition and Consul Enterprise 1.13.0 through 2.0.2 are vulnerable to an unauthenticated denial of service through unbounded connection acceptance on the external gRPC listeners. A remote attacker may exhaust agent file descriptors, goroutines, and memory by opening many incomplete connections, potentially preventing legitimate clients from connecting. This vulnerability, CVE-2026-15972, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3.
-
CVE-2026-71557 6.3 Moyenne
go-git
go-git is an extensible git implementation library written in pure Go. Prior to 5.19.2 and 6.0.0-alpha.5, reference names are not sanitized before being used to construct on-disk paths under the reference storage directory, so a maliciously crafted reference name (for example containing directory-traversal sequences) can cause go-git to write files outside the intended reference storage directory. Versions 5.19.2 and 6.0.0-alpha.5 fix the issue.
-
CVE-2026-71556 7.1 Élevée
go-git
go-git is an extensible git implementation library written in pure Go. Prior to 5.19.2 and 6.0.0-alpha.5, worktree operations (including checkout, status, and add) resolve symbolic links inside the working tree without confining resolution to the worktree boundary, so a maliciously crafted repository containing a symlink can cause go-git to read from or write to files outside the intended working directory when the repository is cloned and its worktree operations are used. Versions 5.19.2 and 6.0.0-alpha.5.
-
CVE-2026-19264 9.8 Critique
gitroomhq postiz-app
Postiz is an open-source social media scheduling tool. The route that serves locally stored media joins URL-supplied path segments onto the upload directory and streams the file without normalising the path or confining it to that directory, and the route requires no authentication. Raw dot-segments are collapsed before routing, but URL-encoded separators survive route matching and are decoded only once they reach the handler, restoring the traversal at the filesystem call. An unauthenticated remote attacker can therefore read any file readable by the application process, including the process environment, which exposes the JWT signing secret, the database connection string, and connected provider and billing secrets. Because session tokens are signed with that secret and carry no expiry, this allows forging a non-expiring session as any user, including an administrator, without a password.
-
CVE-2026-15148 5.3 Moyenne
Unknown WP Events Manager
The WP Events Manager WordPress plugin before 2.2.5 does not verify that an incoming payment notification originates from the site's configured merchant account, nor that the paid amount matches the booking total, allowing unauthenticated users to mark any booking as paid without a legitimate payment reaching the merchant, including other users' bookings.
-
CVE-2026-15359 6.5 Moyenne
Unknown Templately
The Templately WordPress plugin before 3.7.1 does not have an authorisation check on one of its request handlers, allowing unauthenticated attackers to overwrite the administrator's stored cloud service connection with an account under their control, disconnecting the legitimate administrator and redirecting the site's cloud template library to attacker-controlled content.
-
CVE-2026-71435 6.1 Moyenne
statamic cms
Statamic is a Laravel and Git powered content management system (CMS). Prior to 5.74.3 and 6.24.2, the default ("automagic") form notification email rendered user-submitted values without escaping, allowing an unauthenticated form submitter to inject HTML into the notification emails sent to the configured recipients. This issue is fixed in versions 5.74.3 and 6.24.2.
-
CVE-2026-71434 5.3 Moyenne
statamic cms
Statamic is a Laravel and Git powered content management system (CMS). Prior to 5.74.3 and 6.24.2, public frontend forms did not enforce the file upload restrictions that the Control Panel enforces, so an unauthenticated visitor could upload file types an administrator had intended to disallow through a form's assets or files field, and for assets fields, files could be stored on a public, web-accessible disk, though the application's global upload allowlist still blocked executable types such as .php and .html. This issue is fixed in versions 5.74.3 and 6.24.2.
-
CVE-2026-67434 7.3 Élevée
PHPCSStandards PHP_CodeSniffer
PHP_CodeSniffer tokenizes PHP files and detects violations of a defined set of coding standards. Prior to versions 3.13.6 and 4.0.2, PHP_CodeSniffer contains a command injection vulnerability in the code that generates the Gitblame, Hgblame, and Svnblame report formats. As a result, running PHP_CodeSniffer over untrusted files, for example in a continuous integration pipeline that scans pull requests, or on a developer machine reviewing third party code, could result in attacker controlled shell commands being executed when the Gitblame, Hgblame, or Svnblame report processes a file whose name contains shell metacharacters. Users using the default Full report, or any of the other non-blame reports, are not affected. Users on a runtime platform which does not allow filenames to contain shell metacharacters, such as " and ;, are not affected. This issue is fixed in versions 3.13.6 and 4.0.2.
-
CVE-2026-64665 8.1 Élevée
statamic cms
Statamic is a Laravel and Git powered content management system (CMS). Prior to 5.74.1 and 6.24.0, when OAuth login was enabled with a provider that does not guarantee verified email addresses, an unauthenticated attacker could sign in as an existing user, potentially including a super admin, without knowing that user's password, because the application matched OAuth identities to accounts by email address alone. Exploitation requires OAuth to be explicitly enabled with such a provider. This issue is fixed in versions 5.74.1 and 6.24.0.
-
CVE-2026-64664 4.3 Moyenne
statamic cms
Statamic is a Laravel and Git powered content management system (CMS). Prior to 5.74.1 and 6.24.0, an authenticated Control Panel user could use an endpoint intended for the user creation wizard to determine if a given email address belonged to an existing user, without having permission to view users, though the endpoint only exposed user existence and not any other user data. This issue is fixed in versions 5.74.1 and 6.24.0.
-
CVE-2026-64663 6.5 Moyenne
statamic cms
Statamic is a Laravel and Git powered content management system (CMS). Prior to 5.74.1 and 6.24.0, manipulating user-supplied input incorporated into Antlers templates could result in the loss of content and assets, on sites whose templates pass untrusted input into affected areas, and exploitation did not require authentication. This issue is fixed in versions 5.74.1 and 6.24.0.
-
CVE-2026-64662 6.5 Moyenne
statamic cms
Statamic is a Laravel and Git powered content management system (CMS). Prior to 5.74.1 and 6.24.0, an authenticated Control Panel user could view content from entries they did not have permission to view, including entry content and custom field values, from any collection and including unpublished entries, through the navigation endpoint, though no data could be modified. This issue is fixed in versions 5.74.1 and 6.24.0.
-
CVE-2026-64655 2.1 Faible
cli
GitHub CLI (gh) is GitHub’s official command line tool. Prior to 2.97.0, gh attestation verify builds the certificate Subject Alternative Name matcher from the --signer-repo and --signer-workflow flag values without escaping regex metacharacters, so a user-supplied repository or workflow name is treated as a regular expression rather than a literal string. Because GitHub permits characters such as `.` in organization, repository, and workflow path names and `.` is a regex wildcard, an attacker can register a lookalike name (for example github/artifact.attestations-workflows) that satisfies a matcher intended for a different trusted signer (github/artifact-attestations-workflows), bypassing the intended Sigstore attestation verification. Exploitation requires the attacker to create a plausible lookalike repository and produce valid attestations from it, which could undermine supply chain verification for CI/CD pipelines or policy gates that pin trust to a specific signing workflow. This issue is fixed in version 2.97.0.
-
CVE-2026-64654 5.3 Moyenne
cli
GitHub CLI (gh) is GitHub's official command line tool. Prior to version 2.97.0, multiple GitHub CLI commands printed externally controlled gist, API, pull request, release, codespace, skill, or agent-task content without neutralizing terminal escape sequences. An attacker who can influence that content can embed escape sequences that are interpreted by the terminal of a user who runs an affected command, with impact ranging from cosmetic manipulation of the title or on-screen content to, on some terminal emulators, command execution. This extends the same class of issue as CVE-2026-45803—which addressed only gh run view --log—to the other affected command paths. This issue is fixed in version 2.97.0.
-
CVE-2026-64653 5.1 Moyenne
cli
GitHub CLI (gh) is GitHub’s official command line tool. Prior to 2.97.0, some HTTP request URLs interpolate variable path components without percent encoding, allowing URL path metacharacters in attacker-controlled repository or resource values to make gh address a different API endpoint or resource than the user intended. This issue is fixed in version 2.97.0.
-
CVE-2026-64652 3.3 Faible
cli
GitHub CLI (gh) is GitHub's official command line tool. Prior to version 2.97.0, gh auth status masked only the characters after the last underscore in certain fine-grained personal access tokens and GitHub App tokens. As a result, part of an affected token could appear in terminal or CI output that is captured or shared. Authenticated users are affected if they ran gh auth status (without the --show-token flag) with a token type whose format contains an underscore after the prefix. This includes fine-grained personal access tokens (github_pat_*) and GitHub App installation and user access tokens (ghs_*, ghu_*; for example, ghs_<APPID>_<JWT>), as well as the Actions GITHUB_TOKEN. Classic tokens such as gho_* and ghp_* have an underscore-free body and are not affected. This issue is fixed in version 2.97.0.
-
CVE-2026-48088 9.4 Critique
open-reception appointment-booking-software
OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. Prior to version 1.0.4, the route `POST /api/tenants/{tenantId}/staff/{staffId}/crypto` accepts and stores attacker-controlled ML-KEM-768 public keys against any tenant on the platform without authentication. The handler logs an "Unauthorized crypto key storage attempt" warning when neither a session nor a registration cookie is present, then proceeds to insert the row regardless. The platform's E2E claim that "even administrators cannot view sensitive information" is broken: any unauthenticated network attacker can register themselves as an additional encryption recipient for any tenant's future patient appointments. A second variant of the bug suppresses the unauthorized-warning log entry. The Zod schema makes the `email` field optional. When the request body omits `email` and the request carries no registration cookie, the comparison `registrationEmail === email` becomes `undefined === undefined`, which evaluates to `true`. The handler treats the request as a legitimate registration flow, skips the warning entirely, and stores the row. Successful storage is still recorded as an `[info]` log line, but the security-relevant warning that operators are most likely to monitor or alert on is gone. The `staff_crypto` table has no unique constraint on `user_id`, so an arbitrary number of attacker rows can coexist for the same staff identifier and all return as `is_active=true`. The supplied `staffId` does not need to match any existing user or pending invite. Schema validation on `passkeyId`, `publicKey`, and `privateKeyShare` is also weak: the literal string `<placeholder-base64>` was accepted, indicating no length, format, or cryptographic-validity check beyond field presence. This weakness is independent of the auth bypass but compounds it: a poisoned directory can also be filled with malformed entries that break legitimate booking flows. The injected key is consumed by the public booking flow. After completing the unauthenticated `bootstrap-challenge` and `bootstrap-verify` ceremony as a "patient", the resulting `bookingAccessToken` is accepted by `GET /api/tenants/{id}/appointments/staff-public-keys`, which returns the attacker-controlled keys alongside any legitimate ones. A new appointment encrypts its tunnel key with ML-KEM to all listed recipients, so the attacker becomes a co-recipient of the encryption and can decapsulate the tunnel key with the matching secret. From there, all appointment payloads for that booking are decryptable. Version 1.0.4 patches the issue.
-
CVE-2026-48083 6.5 Moyenne
open-reception appointment-booking-software
OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. Prior to version 1.0.2, the `/api/log` endpoint accepts unauthenticated POST requests, applies no schema validation to the message body, writes attacker-controlled content directly into the application's stdout log, interprets newline characters as real line breaks, and enforces no size or rate limits. Three independent abuse modes follow: log injection (forge log lines that look like legitimate system events), log volume DoS (saturate the logging pipeline at sustained 100+ requests per second of small messages), and oversized-payload submission (100 KB payloads accepted; larger sizes not tested). The most operationally damaging mode is log injection. An attacker can inject lines that an operator scanning logs would mistake for real system errors, mask their own activity behind fake noise, or pollute SIEM alerting rules with crafted false positives. A line such as `[error]: injected admin error` injected from an unauthenticated source is indistinguishable from the application's own error output once written to disk. Version 1.0.2 fixes the issue.
-
CVE-2026-48075 6.5 Moyenne
open-reception appointment-booking-software
OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. Prior to version 1.0.5, the `add-to-tunnel` endpoint creates a new appointment row in any client tunnel without any caller authentication. A request that supplies any valid `tunnelId` and any valid `emailHash` (the two need not belong to the same tunnel) results in an inserted appointment with `status = "CONFIRMED"`, attacker-controlled ciphertext fields, attacker-controlled date and duration, and an attacker-chosen agent. The endpoint validates only that some tunnel exists with the given `emailHash`, then writes the appointment using the attacker-supplied `tunnelId` directly. The `emailHash` lookup is effectively an existence check on the tenant; it does not authenticate the caller as the owner of the supplied `tunnelId`. Combined with the absence of any session, Authorization header, booking access token, or PoW, this makes the endpoint accept arbitrary appointment writes into arbitrary tunnels. By contrast, the sibling endpoint `create-new-client` (used to bootstrap a brand-new client tunnel) requires a Bearer bootstrap booking access token issued by the bootstrap-challenge / bootstrap-verify flow. The `add-to-tunnel` endpoint, intended for return-clients booking additional appointments, has no equivalent gate. The application's own middleware confirms this is intentional: `add-to-tunnel` is explicitly listed in the apiAuthHandle public-route allowlist alongside the bootstrap and challenge endpoints (which legitimately have no session). Version 1.0.5 fixes the issue.
-
CVE-2026-19127 6.5 Moyenne
GitroomHQ postiz-app
An issue in the billing and license activation subsystem allows remote attackers to bypass payment authorization workflows. By exploiting insufficient cryptographic validation or lack of server-side state verification on promotional/lifetime-deal (LTD) redemption codes, an unauthenticated attacker can forge valid redemption tokens or replay existing single-use codes to activate permanent, tier-highest paid subscriptions without a financial transaction.
-
CVE-2026-11361 5.9 Moyenne
Unknown Formidable Forms
The Formidable Forms WordPress plugin before 6.32.1 does not properly validate the status of a PayPal subscription payment before marking it complete, allowing unauthenticated users to bypass payment and trigger paid form actions — such as digital content access, license delivery, and membership activation — without being charged.
-
CVE-2026-53977 7.5 Élevée
Bohdan Triapitsyn OpenChamber
OpenChamber 1.11.7 contains an authentication bypass vulnerability that allows unauthenticated remote attackers to terminate the server process by sending a POST request to the /api/system/shutdown endpoint, which is registered before the authentication middleware in the Express route handler chain. Attackers can exploit the route registration order in bootstrap-runtime.js to reach the shutdown handler before auth middleware executes, causing denial of service to all active AI coding sessions and locking out legitimate remote users regardless of whether UI_PASSWORD is configured.
-
CVE-2026-16731 8.3 Élevée
OMICRON electronics GmbH OMICRON StationScout
OMICRON StationScout before version 3.05 contains a cryptographic timing side-channel vulnerability in the backend authentication mechanism that may allow an unauthenticated attacker to forge valid authentication credentials, bypass authentication and authorization, and impersonate legitimate clients. An attacker can gain full access to the system configuration, allowing modification, reset, or unauthorized alteration of system parameters or injecting network traffic into the connected network.
-
CVE-2026-16315 8.7 Élevée
OMICRON electronics GmbH OMICRON StationGuard
OMICRON StationGuard before version 4.10 contains a cryptographic timing side-channel vulnerability in the backend authentication mechanism that may allow an unauthenticated attacker to forge valid authentication credentials, bypass authentication and authorization, and impersonate legitimate clients. An attacker can gain full access to the system configuration, allowing modification, reset, or unauthorized alteration of system parameters.
-
CVE-2026-19022 6.3 Moyenne
OpenHands
A vulnerability was determined in OpenHands up to 0.62.0. The affected element is the function initialize_repo of the file OpenHands/resolver/send_pull_request.py. This manipulation causes command injection. Remote exploitation of the attack is possible. The vendor deleted the original GitHub issue report. It appears that the affected path/file got removed in version 1.7.0.
-
CVE-2025-12627 2.4 Faible
WSO2 Identity Server · WSO2 Carbon OAuth
The user impersonation flow in WSO2 Identity Server fails to properly manage refresh tokens associated with impersonated sessions. This allows an attacker who has obtained an access token for an impersonated user to leverage the refresh token grant to obtain new access tokens, extending their ability to act as the legitimate user. An attacker who gains access to an impersonated user's access token can exploit this weakness to renew their authorization. This results in the continued ability to perform actions on behalf of the actual user, compromising log integrity and traceability by masking the true actor.
-
CVE-2025-11850 4.3 Moyenne
WSO2 Identity Server · WSO2 Token Exchange Grant Type For OAuth
When secondary user stores are configured, the implicit-association resolver incorrectly initializes from a secondary user store and bypasses the primary user store during search and uniqueness checks. This allows a subject to be associated with an unintended local account if the same lookup claim (e.g., username or email) exists in both the primary and a secondary store. If duplicate claim values exist across user stores, this issue can lead to identity confusion due to incorrect implicit associations when using an external Identity Provider (IDP). Legitimate user accounts in the primary user store may fail to associate correctly with their corresponding external IDP accounts, potentially restricting access if the secondary account has fewer privileges. Deployments are not affected if no secondary user stores are configured, implicit association is disabled, or claim values are globally unique.
-
CVE-2026-71311 6.4 Moyenne
rclone
rclone is a command-line program to sync files and directories to and from different cloud storage providers. Prior to 1.75.0, a valid but nondefault FTP filename encoding in backend/ftp/ftp.go can restore raw CR/LF immediately before an attacker-controlled path is interpolated into the line-oriented FTP control channel, and github.com/jlaffaye/ftp formats the argument through textproto.Conn.Cmd without rejecting CR or LF, allowing a filename such as victim CRLF DELE other-secret CRLF NOOP to inject an independent authenticated FTP command when the victim copies or syncs to a more-privileged FTP destination. This issue is fixed in 1.75.0.
-
CVE-2026-34966 7.6 Élevée
Gitea
Gitea prior to 1.27.0 contains a server-side request forgery vulnerability that allows authenticated attackers to bypass SSRF protections by exploiting HTTP fetch operations in migration and OAuth avatar code paths that use Go's default http.Get without a custom DialContext. Attackers can supply arbitrary URLs through release asset download URLs, pull-request patch URLs, or OAuth avatar endpoints to reach internal services, cloud instance-metadata endpoints, or read local files such as the application configuration containing database credentials and signing secrets, with exfiltrated content persisted as migration release assets for later retrieval.
-
CVE-2026-15996 7.5 Élevée
GitHub Enterprise Server
A denial of service vulnerability was identified in GitHub Enterprise Server that allowed an unauthenticated attacker to cause excessive CPU consumption and exhaust the pool of request-handling worker processes by sending a crafted form-encoded HTTP POST request containing deeply nested parameters. Because request parameters were parsed before routing and authentication, any POST endpoint could be used to trigger the condition, which could render the instance unresponsive. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.21 and was fixed in versions 3.20.3, 3.19.7, 3.18.10, and 3.17.16.
-
CVE-2026-21766 5.4 Moyenne
HCLSoftware HCL Digital Experience and Digital Experience Compose
The default login portlet in HCL Digital Experience and Digital Experience Compose insufficiently protects credentials. Under certain very specific use cases and specific configurations, sensitive information may be written to web server logs. This only affects applications using the default login portlet.
-
CVE-2026-17556 9.1 Critique
GitHub Enterprise Server
A path traversal vulnerability was identified in GitHub Enterprise Server that allowed an unauthenticated attacker to delete arbitrary files and directories on the instance, including the entire user storage directory containing Git LFS objects, release assets, attachments, and avatars. The X-GitHub-Request-Id request header was used without sanitization as a filesystem path segment for the upload buffer directory, so a traversal value pointed the buffer at an arbitrary path and the deferred cleanup routine recursively removed the traversed target. Exploitation required only network reachability to the instance and no authentication, and it worked even when private mode was enabled. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.22 and was fixed in versions 3.21.4, 3.20.6, 3.19.10, 3.18.13 and 3.17.19. This vulnerability was reported via the GitHub Bug Bounty program.
-
CVE-2026-48168 10.0 Critique
MervinPraison PraisonAI
PraisonAI is a multi-agent teams system. In versions prior to 4.6.40, the bundled Claude GitHub Actions workflow is vulnerable to command injection because it embeds an attacker-controlled pull request branch name into a Bash run: block without quoting or validation. Additionally, the workflow allows any @claude comment to trigger the job regardless of whether the commenter is a trusted collaborator. An outside contributor can open a pull request from a fork whose branch name contains shell metacharacters and comment @claude, causing Bash to execute arbitrary shell code in the GitHub Actions runner. Because these commands run in a job holding a GitHub App token with write permissions, OIDC access, and gh/git access, the injection can be chained through $GITHUB_PATH to compromise later privileged steps, enabling repository writes, pull request and issue manipulation, or OIDC-token abuse. This issue has been fixed in version 4.6.40.
-
CVE-2026-70444 4.3 Moyenne
Jenkins Project Jenkins Violation Comments to GitLab Plugin
A missing permission check in Jenkins Violation Comments to GitLab Plugin 2.62.0 and earlier allows attackers with Overall/Read permission to enumerate credentials IDs of credentials stored in Jenkins.
-
CVE-2026-9190 9.1 Critique
Progress Software Corporation MarkLogic Server · Progress marklogic server
An HTTP request smuggling vulnerability in the HTTP App Server of Progress MarkLogic Server before 11.3.6 and 12.0.3 allows a remote attacker to bypass authentication and authorization checks, hijack a legitimate user's session, or capture credentials. The vulnerability occurs when a crafted HTTP request containing both Content-Length and Transfer-Encoding headers causes a reverse proxy and MarkLogic Server to interpret request boundaries differently.
-
CVE-2026-12410 7.8 Élevée
Gen Digital CCleaner
Link following vulnerability in the Uninstaller component in CCleaner prior to 7.10.1464 on Windows allows a local, low-privileged attacker to escalate privileges to SYSTEM via a symlink/junction created during application uninstallation, which CCleaner follows when deleting the application's data folder with elevated integrity.
-
CVE-2026-67623 8.8 Élevée
mistralai mistral-vibe
Mistral Vibe before 2.23.3 contains a remote code execution vulnerability that allows attackers to execute arbitrary commands by embedding a malicious core.fsmonitor hook in a repository's .git/config file, which is triggered when vibe invokes git status --porcelain without suppressing hook execution. Attackers can distribute or create a crafted repository containing a malicious fsmonitor entry to achieve arbitrary command execution with the victim's full privileges when any vibe command is run inside that repository.
-
CVE-2026-71287 8.8 Élevée
cacti
Cacti's sanitize_sql_column (lib/functions.php) sanitizes user-supplied ORDER BY column names using the regex . Because this allowlist retains letters, digits, underscore, parentheses, and dot (intended to support expressions like COUNT(id) and table.column), a payload such as passes through completely unmodified.
-
CVE-2026-71259 8.6 Élevée
esphome
ESPHome through 2026.7.0-dev contains an operator-precedence bug in the cv.url validator in esphome/config_validation.py. Because binds tighter than , any file: URI passes validation regardless of netloc. This validator gates the field of the external_components YAML directive's git source schema, which is passed to (git supports file:// natively).
-
CVE-2026-61486 9.8 Critique
Apache Software Foundation Apache Lucy · Apache lucy
** UNSUPPORTED WHEN ASSIGNED ** Stack-based Buffer Overflow vulnerability in Apache Lucy. This issue affects Apache Lucy: all versions. As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users. Lucy is now maintained outside of the ASF at https://github.com/lucysearch . This issue has been fixed in 0.8.0 there. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-61484 9.8 Critique
Apache Software Foundation Apache Lucy · Apache lucy
** UNSUPPORTED WHEN ASSIGNED ** Deserialization of Untrusted Data vulnerability in Apache Lucy. This issue affects Apache Lucy: all versions. As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users. Lucy is now maintained outside of the ASF at https://github.com/lucysearch . 0.8.0 is no longer affected by this issue, because the offending feature has been removed there. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.
-
CVE-2026-61483 7.5 Élevée
Apache Software Foundation Apache Lucy · Apache lucy
** UNSUPPORTED WHEN ASSIGNED ** Uncontrolled Recursion vulnerability in Apache Lucy. This issue affects Apache Lucy: all versions. As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users. NOTE: This vulnerability only affects products that are no longer supported by the ASF. Lucy is now maintained outside of the ASF at https://github.com/lucysearch
-
CVE-2026-70375 8.8 Élevée
HashBrownCMS hashbrown-cms
HashBrown CMS through 1.4.6 contains an OS Command Injection vulnerability (CWE-78) in the Git deployer component. GitDeployer.pullRepo in src/Server/Entity/Deployer/GitDeployer.js executes AppService.exec, interpolating the configured branch value directly into a shell command with no escaping.
-
CVE-2026-9273 9.3 Critique
stellarwp Membership Plugin – Kadence Memberships
The Membership Plugin – Kadence Memberships plugin for WordPress (formerly Restrict Content) is vulnerable to password reset link poisoning leading to account takeover in all versions up to, and including, 4.0.0. This is due to the legacy lost-password handler rc_process_lost_password_form() consuming the attacker-controlled rc_redirect POST parameter into two unvalidated sinks in legacy/includes/forms.php: wp_redirect( esc_url( $_POST['rc_redirect'] ) . ... ) at line 243, and add_query_arg( array( 'key' => $key, 'login' => ... ), $_POST['rc_redirect'] ) inside rc_send_password_reset_email() at line 306. The nonce required to reach the handler is broadcast by the public [login_form] shortcode at line 207 to any anonymous visitor. This makes it possible for unauthenticated attackers to issue a password-reset request for any account (including administrators) whose reset email body points the victim at an attacker-controlled host carrying a valid reset key/login. When the victim clicks the link, the reset key leaks to the attacker, who can replay it against the legitimate site to complete account takeover.
-
CVE-2026-21366 7.8 Élevée
Qualcomm, Inc. Snapdragon · Qualcomm lemans au lgit firmware · Qualcomm lemansau firmware · Qualcomm qam8255p firmware
Memory corruption while processing a packet with a size close to the maximum allowed value.
-
CVE-2026-68494 8.7 Élevée
FasterXML jackson-core
The fix released in jackson-core 2.18.6 and 2.21.1 for CVE-2026-18401 (GHSA-72hv-8253-57qq, number length constraint bypass in the non-blocking parser) is incomplete. This record covers the remaining bypass. The earlier fix wired validateIntegerLength() into a new _setIntLength() helper and invoked it wherever the integer portion of a number is decided: a terminator byte arrives, a '.' or 'e'/'E' is seen, or input ends inside a fully buffered value. It was not invoked on the attacker-relevant path where the parser runs out of input while still inside the MINOR_NUMBER_INTEGER_DIGITS minor state and returns NOT_AVAILABLE to the caller. As a result, an attacker who streams JSON to a non-blocking parser in many small chunks, without ever sending a terminator byte, keeps the parser inside MINOR_NUMBER_INTEGER_DIGITS indefinitely. _textBuffer.expandCurrentSegment() grows the accumulator on every chunk while validateIntegerLength() is never called. The accumulator is bounded only by maxStringLength (20 MiB by default) rather than by maxNumberLength (1000 by default), an amplification of roughly 20,000x over the documented limit. Because Java char values occupy two bytes, a single connection can be driven to approximately 40 MiB of heap before the validator finally fires when the value completes. The equivalent fraction-path code is correct: _finishFloatFraction() calls _setFractLength() before its NOT_AVAILABLE return. The missing call affects the integer-digit paths in _startPositiveNumber(), _startNegativeNumber() and _finishNumberIntegralPart() in NonBlockingUtf8JsonParserBase. Impact: reactive frameworks such as Spring WebFlux/Reactor, Quarkus, Helidon and Vert.x feed inbound HTTP or gRPC bytes to the async parser as they arrive, which is precisely the chunked-feed shape required. Operators who set StreamReadConstraints.maxNumberLength expecting it to cap memory per number value do not get that guarantee; memory accumulates per concurrent connection and attacker-controlled concurrency can exhaust the JVM heap. The synchronous parsers (UTF8StreamJsonParser, ReaderBasedJsonParser) and the async parser operating on complete input are not affected. Exploitation requires only the ability to stream data to a parsing endpoint; no privileges or user interaction are needed. This issue affects com.fasterxml.jackson.core:jackson-core from version 2.15.0 through 2.18.7, and from 2.19.0 through 2.21.3, and tools.jackson.core:jackson-core from 3.0.0 through 3.1.3. Versions prior to 2.15.0 are not affected, because StreamReadConstraints -- which defines the maxNumberLength setting -- was first introduced in jackson-core 2.15.0, so no such constraint exists to be bypassed in earlier releases. Note that GHSA-r7wm-3cxj-wff9 states the affected 2.x range without a lower bound. The 2.22.x and 3.2.x release lines are not affected: those branches were created after the fix commit landed on 2026-05-21 and therefore contain it from their initial releases (2.22.0, tagged 2026-06-03, and 3.2.0, tagged 2026-06-08).
-
CVE-2026-18401 6.9 Moyenne
FasterXML jackson-core
The non-blocking (asynchronous) JSON parser in jackson-core does not enforce the maxNumberLength constraint defined in StreamReadConstraints (default: 1000 characters). An attacker able to submit JSON to an application that uses the async parser API can supply a number token of arbitrary length, leading to excessive memory allocation and potential CPU exhaustion, resulting in a denial of service. The synchronous parser enforces this limit correctly, so the constraint is applied inconsistently depending on which parsing API the application uses. Root cause: the async parsing path in NonBlockingUtf8JsonParserBase and related classes never invokes the number length validation methods. Number parsing methods such as _finishNumberIntegralPart() accumulate digits into the TextBuffer without any length check, then call _valueComplete() to finalize the token. _valueComplete() does not call resetInt() or resetFloat(), which are the methods in ParserBase where validateIntegerLength() and validateFPLength() are performed. Because that validation step is skipped, maxNumberLength is never enforced on the async code path. Impact: an attacker sending a JSON document containing an arbitrarily long number to an application using the async parser (for example a Spring WebFlux or other reactive application) can cause unbounded allocation in the TextBuffer and an OutOfMemoryError. If the application subsequently calls getBigIntegerValue() or getDecimalValue(), the JVM may additionally be tied up in O(n^2) BigInteger parsing, causing CPU-based denial of service. No privileges or user interaction beyond the ability to submit data for parsing are required. This issue affects com.fasterxml.jackson.core:jackson-core from version 2.15.0 through 2.18.5 and from 2.19.0 through 2.21.0, and tools.jackson.core:jackson-core from 3.0.0 through 3.0.x. Versions prior to 2.15.0 are not affected, because StreamReadConstraints -- which defines the maxNumberLength setting -- was first introduced in jackson-core 2.15.0, so no such constraint exists to be bypassed in earlier releases. Note that GHSA-72hv-8253-57qq records the lower bound of the affected 2.x range as 2.0.0.
-
CVE-2026-66884 2.1 Faible
Erlang Ecosystem Foundation oidcc_plug
Cross-Site Request Forgery vulnerability in Erlang Ecosystem Foundation oidcc_plug (Oidcc.Plug.AuthorizationCallback module) allows an attacker to make a victim's browser complete an authorization flow the victim never initiated. This vulnerability is associated with program file lib/oidcc/plug/authorization_callback.ex and program routine Oidcc.Plug.AuthorizationCallback.call/2. A callback request that carries no Oidcc.Plug.Authorize session is processed with every security check disabled rather than being rejected. call/2 substitutes permissive defaults for the absent session, and each downstream check treats its value as nothing to compare and returns :ok, so the nonce, state, PKCE, peer IP and user agent checks are all skipped. A separate clause of check_state/2 also accepts a state-less request when a verifier is present. An attacker obtains an authorization code for their own provider account, then induces the victim to visit the callback endpoint with that code and no state parameter. The application signs the victim in as the attacker, so the victim's subsequent actions occur in the attacker's account where the attacker can read them. Applications reusing one callback for both signing in and linking a provider account are further exposed to account takeover, the attacker's account becoming linked to the victim's. The permissive fallback serves no conforming flow. Third-party-initiated login reaches a relying party at a separate login initiation endpoint and causes it to send a fresh authentication request, and this library implements no such endpoint. Oidcc.Plug.Authorize always sends a state parameter, which an authorization server must echo, so no legitimate callback lacks one. This issue affects oidcc_plug: from 0.2.0-beta.1 before 0.5.0.
-
CVE-2026-15721 9.8 Critique
Bilin Software and Informatics Consultancy Inc. HUMANIST Digital Human Resources
Cleartext storage of sensitive information vulnerability in Bilin Software and Informatics Consultancy Inc. HUMANIST Digital Human Resources allows SQL Injection. This issue affects HUMANIST Digital Human Resources: from 26.0 before 26.1.
-
CVE-2026-14838 7.4 Élevée
Bilin Software and Informatics Consultancy Inc. HUMANIST Digital Human Resources
Use of GET request method with sensitive query strings vulnerability in Bilin Software and Informatics Consultancy Inc. HUMANIST Digital Human Resources allows Session Hijacking. This issue affects HUMANIST Digital Human Resources: from 26.0 before 26.1.
-
CVE-2026-14804 9.1 Critique
Bilin Software and Informatics Consultancy Inc. HUMANIST Digital Human Resources
Use of hard-coded cryptographic key vulnerability in Bilin Software and Informatics Consultancy Inc. HUMANIST Digital Human Resources allows Read Sensitive Constants Within an Executable. This issue affects HUMANIST Digital Human Resources: from 26.0 before 26.1.
-
CVE-2026-14465 6.5 Moyenne
Bilin Software and Informatics Consultancy Inc. HUMANIST Digital Human Resources
Insufficient session expiration vulnerability in Bilin Software and Informatics Consultancy Inc. HUMANIST Digital Human Resources allows Reusing Session IDs (aka Session Replay). This issue affects HUMANIST Digital Human Resources: from 26.0 before 26.1.
-
CVE-2026-14219 5.4 Moyenne
Bilin Software and Informatics Consultancy Inc. HUMANIST Digital Human Resources
URL redirection to untrusted site ('open redirect') vulnerability in Bilin Software and Informatics Consultancy Inc. HUMANIST Digital Human Resources allows Phishing. This issue affects HUMANIST Digital Human Resources: from 26.0 before 26.1.
-
CVE-2026-14202 5.3 Moyenne
Bilin Software and Informatics Consultancy Inc. HUMANIST Digital Human Resources
Observable response discrepancy vulnerability in Bilin Software and Informatics Consultancy Inc. HUMANIST Digital Human Resources allows Account Footprinting. This issue affects HUMANIST Digital Human Resources: from 26.0 before 26.1.
-
CVE-2026-14194 6.5 Moyenne
Bilin Software and Informatics Consultancy Inc. HUMANIST Digital Human Resources
Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Bilin Software and Informatics Consultancy Inc. HUMANIST Digital Human Resources allows Path Traversal. This issue affects HUMANIST Digital Human Resources: from 26.0 before 26.1.
-
CVE-2026-14192 5.4 Moyenne
Bilin Software and Informatics Consultancy Inc. HUMANIST Digital Human Resources
Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Bilin Software and Informatics Consultancy Inc. HUMANIST Digital Human Resources allows Stored XSS. This issue affects HUMANIST Digital Human Resources: from 26.0 before 26.1.
-
CVE-2026-14175 9.8 Critique
Bilin Software and Informatics Consultancy Inc. HUMANIST Digital Human Resources
Unrestricted upload of file with dangerous type vulnerability in Bilin Software and Informatics Consultancy Inc. HUMANIST Digital Human Resources allows Upload a Web Shell to a Web Server. This issue affects HUMANIST Digital Human Resources: from 26.0 before 26.1.
-
CVE-2026-18755 7.3 Élevée
GeoVision Inc. GV-ASManager
A DLL hijacking vulnerability in GeoVision GV-ASManager allows a local attacker with write access to an unsafe search directory to execute arbitrary code. By placing a crafted dynamic-link library (DLL) file into the application search path prior to the legitimate library, the malicious code is loaded and executed under the security privileges of the GV-ASManager process.
-
CVE-2026-16035 4.3 Moyenne
Unknown miniOrange 2FA
The miniOrange 2FA WordPress plugin before 6.2.7 does not restrict who can trigger its second-factor configuration OTP send, nor bind the OTP recipient to the enrolling user's own address, allowing a low-privileged user to send one-time-passcode emails to arbitrary recipients and to exhaust the site's metered OTP allowance, preventing legitimate users from receiving their second-factor codes.
-
CVE-2026-51190 9.8 Critique
The "s init" command in Serverless-Devs @serverless-devs/s <= 3.1.11 passes unsanitized user input to child_process.spawn() with shell: true. A URL ending in ".git" bypasses the only input check, allowing OS command injection when a user runs "s init" with an attacker-controlled argument.
-
CVE-2025-15630 5.9 Moyenne
TP-Link Systems Inc. Omada Gateways · TP-Link Systems Inc. Omada Switches · TP Link Systems Inc. Omada Access Points · TP-Link Systems Inc Omada Controllers
A race condition exists in the cloud-based Omada device adoption process when an attacker may be able to interact with the adoption workflow before a legitimate device completes registration, resulting in provisioning information being delivered to an attacker. Successful exploitation may allow disclosure of provisioning information intended for a legitimate device.
-
CVE-2026-69097 7.3 Élevée
gitpython-developers GitPython · Gitpython project gitpython
GitPython before 3.1.53 fails to properly escape section names in git config files, allowing attackers to inject arbitrary configuration directives through malicious submodule names. Attackers can inject core.sshCommand or other dangerous config keys into the victim's .git/config via create_submodule or clone_from operations, achieving remote code execution when git performs ssh operations.
-
CVE-2026-0392 7.3 Élevée
Latvijas Valsts radio un televīzijas centrs (LVRTC) eParakstītājs 3.0
eParakstītājs 3.0 for Windows before version 1.10.0 retrieves and executes its automatic updates over a channel that is not authenticated or integrity-protected. On each launch the application fetches an update descriptor (XML) over TLS but accepts any TLS certificate (a permissive TrustManager and a HostnameVerifier that always returns true), does not verify any digital signature on the update descriptor, and does not verify the Authenticode signature or a checksum of the downloaded installer before running it. A man-in-the-middle attacker able to redirect www.eparaksts.lv can serve a crafted update descriptor pointing to an attacker-controlled executable, which the client downloads and executes, resulting in arbitrary code execution on the victim host.
-
CVE-2026-14557 9.1 Critique
Unknown SoftMarket — Digital Marketplace
The SoftMarket — Digital Marketplace WordPress plugin through 1.0.0 does not properly validate an authentication token in one branch of its email-verification flow, allowing unauthenticated attackers to obtain a valid session as any verified user by supplying only that user's ID.