Samedi 8 août 2026

D-Link Corporation DWR-M961

D-Link DWR-M961 devices with hardware version C1 and software version 1.1.2_C1_202602110044 contain a buffer overflow vulnerability in the quicksetup.cgi interface. A remote attacker can write overly long strings to the test4, ssid2, and username fields and execute arbitrary commands by crafting a specific payload, or cause the device to crash.

D-Link Corporation DWR-M961

D-Link DWR-M961 devices with hardware version C1 and software version 1.1.2_C1_202602110044 contain a buffer overflow vulnerability in the app.cgi interface. A remote attacker can write an overly long string to the netAcc.addlist[].name field and execute arbitrary commands by crafting a specific payload, or cause the device to crash.

D-Link Corporation DWR-M961

D-Link DWR-M961 devices with hardware version C1 and software version 1.1.2_C1_202602110044 contain a command injection vulnerability in the app.cgi interface. A remote attacker can inject arbitrary malicious commands into the netDig.ping.dst field, resulting in command execution with root privileges.

D-Link Corporation DWR-M961

D-Link DWR-M961 devices with hardware version C1 and software version 1.1.2_C1_202602110044 contain a command injection vulnerability in the /boafrm/formWsc interface. A remote attacker can inject arbitrary malicious commands into the localPin, targetAPSsid, peerPin, and peerRptPin fields, resulting in command execution with root privileges.

D-Link Corporation DWR-M961

D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formL2tpv3ConfigSetup interface. A remote attacker can inject arbitrary malicious commands into the tunnelid and sessionid fields, resulting in command execution with root privileges.

D-Link Corporation DWR-M961

D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formNtp interface. A remote attacker can inject arbitrary malicious commands into the ntpServerIp1 field, resulting in command execution with root privileges.

D-Link Corporation DWR-M961

D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formPinManageSetup interface. A remote attacker can inject arbitrary malicious commands into the oldPIn field, resulting in command execution with root privileges.

D-Link Corporation DWR-M961

D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formIMEISetup interface. A remote attacker can inject arbitrary malicious commands into the IMEI_value field, resulting in command execution with root privileges.

D-Link Corporation DWR-M961

D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formSmsManage interface. A remote attacker can inject arbitrary malicious commands into the action_value field, resulting in command execution with root privileges.

D-Link Corporation DWR-M961

D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formUSSDSetup interface. A remote attacker can inject arbitrary malicious commands into the ussdValue and selectMenuValue fields, resulting in command execution with root privileges.

D-Link Corporation DWR-M961

D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formDebugDiagnosticRun interface. A remote attacker can inject arbitrary malicious commands into the host field, resulting in command execution with root privileges.

D-Link Corporation DWR-M961

D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formTracerouteDiagnosticRun interface. A remote attacker can inject arbitrary malicious commands into the host and ipVer fields, resulting in command execution with root privileges.

D-Link Corporation DWR-M961

D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formPingDiagnosticRun interface. A remote attacker can inject arbitrary malicious commands into the host field, resulting in command execution with root privileges.

D-Link Corporation DWR-M961

D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formLtefotaUpgradeFibocom interface. A remote attacker can inject arbitrary malicious commands into the fota_url field, resulting in command execution with root privileges.

D-Link Corporation DWR-M961

D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formLtefotaUpgradeQuectel interface. A remote attacker can inject arbitrary malicious commands into the fota_url field, resulting in command execution with root privileges.

Linux

In the Linux kernel, the following vulnerability has been resolved: libceph: fix two unsafe bare decodes in decode_lockers() decode_lockers() in cls_lock_client.c contains two bare decode operations that allow a malicious or compromised OSD to trigger slab-out-of-bounds reads: 1. ceph_decode_32(p) at the num_lockers field has no preceding bounds check. ceph_start_decoding() accepts struct_len=0 as valid -- the internal ceph_decode_need(p, end, 0, bad) always passes -- so when an OSD sends struct_len=0, ceph_start_decoding() returns success with p == end. The immediately following bare ceph_decode_32(p) then reads 4 bytes past the validated buffer boundary. The garbage value is passed directly to kzalloc_objs() as the locker count. The sibling function decode_watchers() in osd_client.c already uses ceph_decode_32_safe() after its own ceph_start_decoding() call. decode_lockers() was the only site using the bare variant. 2. ceph_decode_8(p) after the decode_locker() loop has no preceding bounds check. If an OSD crafts num_lockers such that the loop advances p exactly to end, the subsequent bare ceph_decode_8(p) reads one byte past the validated buffer boundary. The result is passed directly into *type, which is used as a lock type discriminator by callers, giving an OSD-controlled one-byte OOB read with direct influence over the lock type field. Fix both by replacing bare operations with their safe variants: ceph_decode_32(p) -> ceph_decode_32_safe(p, end, *num_lockers, err_inval) ceph_decode_8(p) -> ceph_decode_8_safe(p, end, *type, err_free_lockers) The goto targets differ intentionally: err_inval: is a new label returning -EINVAL directly. It is used for the pre-allocation failure path where *lockers is not yet allocated and must not be passed to ceph_free_lockers(). err_free_lockers: is the existing label. It is used for the post-allocation failure path where *lockers is allocated and must be freed. ret is set to -EINVAL before ceph_decode_8_safe() so that err_free_lockers returns the correct error code on bounds violation. Without this, err_free_lockers would return a stale ret value (0 from the successful decode_locker() loop), silently swallowing the error. -EINVAL is correct for both failure paths. The data received from the OSD is structurally malformed. -ENOMEM would misrepresent the failure class to callers and to stable@ backporters triaging error paths. Attacker model: a malicious or compromised OSD in a multi-tenant Ceph deployment can trigger this against any kernel client that issues the lock.get_info class method (e.g. during RBD exclusive lock acquisition). [ idryomov: trim changelog, formatting ]

wupsales AI Copilot – Content Generator

The AI Copilot – Content Generator plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 1.5.6. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to create a new administrator-level user account and achieve full site takeover by saving and executing a malicious workflow containing a wp_create_user action node specifying role=administrator. This vulnerability is exploitable by unauthenticated attackers on any site where the [aiwu-form] shortcode or public chatbot is rendered on a frontend page, as the waic-nonce value is emitted into publicly accessible JavaScript (WAIC_DATA.waicNonce) on those pages, rendering the nonce check a non-functional authorization barrier.

openyak

OpenYak is a local-first agent runtime for reliable tool-using models, with a desktop workspace built on top. Prior to version 1.1.3, the OpenYak desktop backend binds an HTTP API to `127.0.0.1:<random port>` (commonly 19141) without server-side Origin validation, loopback authentication, or Content-Type enforcement, and with a wildcard CORS policy. Any webpage a user visits while OpenYak is running can issue cross-origin requests to this local server — the browser acts as a proxy into loopback, bypassing OS-level network isolation. Chained, this lets a malicious page execute arbitrary shell commands on the host (RCE) via the build agent with `permission_presets.bash=true`, shut down the service, and exfiltrate chat history and account PII — with no user interaction beyond opening the page. Version 1.1.3 patches the issue.

thomaspoignant scim-patch

`scim-patch`, a library to perform SCIM patch, prior to version 0.9.1 performs prototype pollution when applying a SCIM PATCH operation whose `value` object contains a key like `"__proto__.someProp"`. After one such patch, `Object.prototype.someProp` is set process-wide, affecting every plain object in the Node process. Any service that calls `scimPatch()` on attacker-controlled JSON (i.e. any SCIM endpoint accepting `PATCH` from an external IdP) is exploitable on a stock Node runtime. Version 0.9.1 contains a patch. A workaround is available. Calling `Object.freeze(Object.prototype)` (and the same on `Array.prototype`, `Function.prototype`) at process startup neutralizes this class of bug — assignment to a frozen prototype becomes a silent no-op in sloppy mode or a `TypeError` in strict mode. Node's `--frozen-intrinsics` flag does this for built-ins automatically.

kata-containers

Kata Containers is an open source project focusing on a standard implementation of lightweight Virtual Machines (VMs) that perform like containers. Prior to 3.31.0, the runtime-rs standalone virtio-fs path is vulnerable to a guest-root to host-root escape. In this configuration, Kata runs the host virtiofsd as root with --sandbox none --seccomp none, so an attacker with root-equivalent access inside the guest can bypass the guest virtio-fs client entirely by taking over the virtio-fs PCI device and building a virtqueue in userspace to submit raw FUSE requests directly to the host virtiofsd. A crafted FUSE_SYMLINK request whose new symlink name is an absolute host path is honored outside the configured shared directory, allowing guest root to create root-owned symlinks in sensitive host locations such as /etc/cron.d. By pointing such a symlink at a guest-controlled crontab payload reachable through a live runtime process's mount namespace, the attacker causes the host cron daemon to execute that payload as host root, crossing the Kata isolation boundary. This issue is fixed in version 3.31.0.