Mercredi 5 août 2026

livebook-dev livebook · Livebook livebook

Not Failing Securely ('Failing Open') vulnerability in livebook-dev livebook allows an unauthenticated network client to obtain full access to a Livebook server that enforces identity through Livebook Teams. A Livebook Agent or App Server connected to Livebook Teams caches the identifier of the deployment group it belongs to, and resolves that identifier against a locally cached list of deployment groups on every request in order to decide whether Teams identity enforcement is active. Livebook.Hubs.TeamClient.handle_call/3 in lib/livebook/hubs/team_client.ex does not distinguish a deployment group that could not be resolved from one that was resolved with identity enforcement switched off: the clause matches only the case where a group was found with enforcement enabled, and falls through to a catch-all that reports enforcement as switched off for everything else. The two neighbouring functions that decide user and application access resolve the same identifier and treat the same unresolved result as a denial. When the identity status is reported as switched off, Livebook.ZTA.LivebookTeams.authenticate/3 in lib/livebook/zta/livebook_teams.ex returns empty identity metadata and allows the request to continue instead of halting it. LivebookWeb.UserPlug.build_current_user/3 merges that empty metadata into a newly built user, whose access type defaults to full access, and LivebookWeb.AuthPlug.authorized?/1 grants access to any user holding full access. The cached identifier becomes unresolvable when the deployment group it refers to is deleted while the agent is not connected to receive the change, most concretely when a deployment group is deleted during the window in which an agent is disconnected or reconnecting. The client removes the group from its cached list without clearing the identifier that refers to it. Any client able to reach the affected server over the network is then granted the same access as a fully privileged member of the organisation, including the ability to read notebooks and configured secrets, execute code on the server's runtime, and disrupt its operation. This issue affects livebook: from 0.19.7 before 0.19.9.

livebook-dev livebook · Livebook livebook

Origin Validation Error vulnerability in livebook-dev livebook allows untrusted notebook output JavaScript to trigger session-wide keyboard shortcuts, including forced evaluation of all cells and runtime restart. Livebook's JS-view feature renders notebook-defined JavaScript inside a sandboxed, cross-origin iframe specifically because that JavaScript is untrusted. The trusted iframe shell in iframe/priv/static/iframe/v5.html forwards every keydown event fired in its own window to the parent page without consulting Event.isTrusted, so an event synthesized by the untrusted script through window.dispatchEvent is forwarded exactly as a genuine keystroke would be. The parent-side relay in assets/js/hooks/js_view.js reconstructs and re-dispatches it on the live page with no further validation, and because assets/js/hooks/session.js registers the global shortcut handler on the document in the capture phase, that handler acts on the replicated event regardless of how it was produced. Sandboxed output JavaScript can therefore drive Livebook's session-wide keyboard shortcuts. Two of them reach LivebookWeb.SessionLive and execute immediately with no confirmation: the shortcut for queueing full evaluation runs every cell in the notebook, and the shortcut for reconnecting the runtime disconnects and reconnects it, discarding in-memory state. A third shortcut deletes the focused cell behind a confirmation dialog that the user can permanently dismiss, after which it too executes silently. Forced full evaluation is the significant consequence, because it causes the notebook's own Elixir code to run without the user choosing to evaluate anything. A user who merely opens a notebook obtained from a third party, or reached from published documentation, can have its code executed on their runtime. Livebook also mirrors cell outputs to every connected client, so a malicious output triggers in a collaborator's browser as soon as it renders. This issue affects livebook: from 0.5.0 before 0.18.7 and from 0.19.0 before 0.19.9.

MervinPraison PraisonAI

PraisonAI is a multi-agent teams system. In versions prior to 1.6.58, the web_crawl tool performs its SSRF check only on the initially supplied URL, allowing the protection to be bypassed so the tool connects to attacker-chosen internal destinations. The check resolves the hostname once with socket.gethostbyname and rejects private/loopback/link-local results, but then passes the URL to a fetcher using httpx.Client(follow_redirects=True) (or urllib.request.urlopen when httpx is absent, which also follows redirects) that re-resolves the hostname at connect time with no further validation. This validate-here/fetch-there gap is exploitable through both HTTP redirects and DNS rebinding. If an attacker can influence URLs passed to web_crawl(), directly or through an agent/tool workflow, they can cause the PraisonAI host to fetch loopback, private-network, or cloud metadata endpoints reachable from that host, with the response body returned in the web_crawl() result. This issue has been fixed in version 1.6.58.

MervinPraison PraisonAI

PraisonAI is a multi-agent teams system. In versions 1.5.128 through 1.6.57, the praisonaiagents.tools.web_crawl_tools.web_crawl() function is vulnerable to server-side request forgery. While it validates the initially supplied URL and blocks direct loopback and private destinations, its default httpx fallback uses httpx.Client(follow_redirects=True) and does not revalidate intermediate or final redirect targets. An attacker who can influence a URL passed to web_crawl(), directly or through an agent or tool workflow, can supply an attacker-controlled public URL that passes the initial host check and then redirects to loopback, private-network, or cloud metadata endpoints reachable from the host, with the redirected response body returned in the web_crawl() result. This constitutes an incomplete fix and patch bypass for the previously disclosed web_crawl SSRF class (GHSA-qq9r-63f6-v542 / CVE-2026-40160 and GHSA-8f4v-xfm9-3244), since the guard validates only the requested URL and not the destination actually fetched after redirection. This issue has been fixed in version 1.6.58.

Cisco IOS XE Software · Cisco IOS · Cisco ios xe

A vulnerability in the Extensible Messaging Client Protocol (XMCP), also referred to as the External Client protocol, of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of malformed XMCP packets. An attacker could exploit this vulnerability by sending a malformed XMCP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload unexpectedly, resulting in a DoS condition. The attacker does not need the XMCP client username to exploit this vulnerability.

neo4j Enterprise Edition · neo4j Community Edition · Neo4j neo4j

Neo4j's Bolt modern handshake decoder treats an overlong capability bit mask the same way it treats a truncated bit mask. When an unauthenticated client sends a selected protocol version followed by 32 continuation bytes in the capability mask, the decoder resets the reader index and waits for more bytes instead of rejecting the protocol message and closing the channel. Because the same unread bytes remain at the front of the decoder buffer, appending a terminating byte later does not recover the connection. The decoder re-reads the same first 32 continuation bytes, returns without producing a handshake-finalization message, and leaves the channel open. This can be triggered before authentication by any client that can reach the Bolt connector.

Apache Software Foundation Apache Answer · Apache answer

Insufficient Verification of Data Authenticity vulnerability in Apache Answer. This issue affects Apache Answer: through 2.0.1. A missing authorization check in the external-login email binding flow allows unauthenticated attackers to take over arbitrary user accounts by tricking victims into clicking a crafted confirmation link. Users are recommended to upgrade to version 2.0.2, which fixes the issue.

Red Hat build of Keycloak 26.4 · Red Hat build of Keycloak 26.4.14 · Red Hat build of Keycloak 26.6 · Red Hat build of Keycloak 26.6.5

A flaw was found in Keycloak's Dynamic Client Registration (DCR) security policy management. The "Allowed Protocol Mapper Types" policy, which restricts which types of data mappers a client can use, fails to re-validate the mapper type during a client update if the mapper's configuration remains unchanged. An attacker with client registration privileges can exploit this by first registering an allowed mapper type with a malicious configuration and then swapping it for a restricted, high-privilege mapper type (such as one that hardcodes administrative roles). This allows the attacker to gain full administrative access to the Keycloak realm.

OpenSSL

Issue summary: A malicious TLS server can cause a memory leak in a TLS client that has enabled OCSP response checking by sending an OCSP response that contains no single response entries. Impact summary: An attacker can leak an attacker-tunable amount of memory per TLS handshake in a victim client application. A long-running client that repeatedly connects to a malicious server can have its memory exhausted, resulting in a Denial of Service. CWE: CWE-401: Missing Release of Memory after Effective Lifetime Description: The affected function is called during X.509 certificate chain verification when OCSP response checking is enabled with the X509_V_FLAG_OCSP_RESP_CHECK or X509_V_FLAG_OCSP_RESP_CHECK_ALL verification flags, for example when a TLS client verifies an OCSP response stapled into the TLS handshake by the server. When the received BasicOCSPResponse contains an empty SEQUENCE OF SingleResponse, which is permitted on the wire and accepted by the OpenSSL decoder, the OCSP_BASICRESP structure allocated by OCSP_response_get1_basic() was not freed because an early return bypassed the cleanup code at the end of the function. The amount of memory leaked per handshake can be amplified by the attacker by padding the certs field of the BasicOCSPResponse with bogus certificates, which are parsed and stored in the leaked structure before the empty response check triggers the early return. A long-running TLS client that repeatedly connects to a malicious server can have its memory exhausted over time. OCSP response checking is not enabled by default. Only client applications that explicitly enable the OCSP response check verification flags are affected. FIPS impact: no The FIPS modules in 4.0 and 3.6 are not affected by this issue as the affected code is outside the OpenSSL FIPS module boundary.

Red Hat build of Keycloak 26.4 · Red Hat build of Keycloak 26.4.14 · Red Hat build of Keycloak 26.6 · Red Hat build of Keycloak 26.6.5

A flaw was found in the Dynamic Client Registration (DCR) component of Keycloak, an identity and access management solution. The default DCR policy fails to properly validate the claim path for User Property mappers, allowing them to write values to sensitive internal claim locations. An attacker with a standard user account and a limited Initial Access Token can exploit this to forge administrative roles in their access token. This allows the attacker to take over other clients, steal confidential secrets, and potentially gain full administrative control over the realm.

go-shiori shiori

go-shiori's DownloadBookmark (internal/core/download.go) fetches a caller-supplied bookmark URL using a plain http.Client with no custom DialContext or destination-IP validation (no IsLoopback, IsPrivate, IsUnspecified, or IsLinkLocalUnicast checks).

Aircoookie WLED

WLED's GET /json/cfg endpoint (registered in wled00/wled_server.cpp) calls serveJson with no settings-PIN check, unlike the /edit endpoint which explicitly checks correctPIN, disclosing the device's general configuration (network, hardware, LED setup) to any unauthenticated client on the network.

Swiss Federal Office of Information Technology, Systems and Telecommunication @oblique/cli

@oblique/cli 15.4.0 contains an OS command injection vulnerability in the project creation functionality. The CLI constructs shell commands through string concatenation and executes them with execSync(). A user-controlled project-name argument is inserted into the shell command without proper neutralization, allowing shell metacharacters to execute additional operating-system commands when the CLI is invoked with a crafted project name.

debevv nanoMODBUS

nanoMODBUS through v1.23.0 contains an out-of-bounds write in the Modbus client-side recv_read_device_identification_res function (FC 0x2B/MEI 0x0E, Read Device Identification) in nanomodbus.c. The server-supplied object_length field (0-246) is validated only against the remaining PDU size (res_size_left) and is never validated against the caller-supplied buffers_length parameter.

Eclipse Foundation Eclipse Theia · Eclipse theia

In Eclipse Theia versions up to and including 1.73.1, the `@theia/filesystem` backend exposes HTTP file-download endpoints (`GET /file`, `GET /files/`, `PUT /files/`) that convert a client-supplied URI directly to a filesystem path and stream the file, without confining it to the workspace or any allow-listed root. In browser (non-Electron) deployments the connection token is enforced only on WebSocket upgrades; the HTTP middleware in `@theia/core` re-issues the cookie and calls `next()` without rejecting tokenless HTTP requests, so these endpoints are reachable without a valid token. As a result an unauthenticated client can read any file readable by the backend process, including files outside the opened workspace (for example `/etc/hosts`, SSH keys, or tokens). Electron mode uses a separate `ElectronSecurityToken` and is not affected via this path.

Eclipse Foundation Eclipse Mojarra · Eclipse mojarra

In Eclipse Mojarra versions 2.3 and following, URL handing in `DefaultFaceletFactory` does not properly sanitize and/or block remote URLs, allowing an attacker to specify a URL to a remote Facelet which will be included and processed as part of the normal request, with the privileges of the target server. This could allow access to restricted files such as `WEB-INF/web.xml` or `/etc/passwd`.

absmach magistrala

Magistrala's Rules Engine allows authenticated users to create rules with embedded Go or Lua scripts executed server-side when IoT messages arrive. The Lua script engine (re/lua.go) performs no input validation at all and preloads dangerous libraries: db (arbitrary database access), ioutil (file I/O), an HTTP client (SSRF), and filepath (traversal).

invoiceninja

InvoiceNinja v5-stable renders an invoice or quote's "terms" field in the client portal using Laravel Blade's raw output directive {!! ->terms !!} (resources/views/portal/ninja2020/invoices/includes/terms.blade.php) with no HTML sanitization.

Eclipse Foundation Eclipse Theia · Eclipse theia

In Eclipse Theia versions up to and including 1.73.1, the `@theia/filesystem` backend binds `POST /file-upload` in every filesystem-enabled deployment. The handler takes an attacker-supplied absolute path from the multipart `uri` field and calls `fs.move(tmp, target, { overwrite: true })` with no workspace confinement and no authentication. In browser (non-Electron) deployments the connection token is enforced only on WebSocket upgrades; the HTTP middleware in `@theia/core` re-issues the cookie and calls `next()` without rejecting tokenless HTTP requests. Because `multipart/form-data` is a CORS-safelisted request type, a cross-origin web page can trigger the write with no preflight and no credentials, resulting in an unauthenticated arbitrary file write outside the workspace to any absolute path the backend process can write. This can escalate to remote code execution, for example by overwriting a startup-executed file such as `~/.bashrc`. Electron mode uses a separate `ElectronSecurityToken` and is not affected via this path.

Eclipse Foundation Eclipse Theia · Eclipse theia

In Eclipse Theia versions 1.66.0 and up until including 1.73.1, the `@theia/plugin-ext` backend exposes the `/hostedPlugin/:pluginId/:path(*)` HTTP endpoint, which resolves the requested file path with `path.resolve(localPath, filePath)` without verifying that the resolved path stays within the plugin's directory. An unauthenticated network attacker can send percent-encoded `../` sequences (`%2e%2e%2f`) that decode into the path parameter and escape the plugin directory, allowing arbitrary files readable by the Theia backend process to be retrieved. Plugin IDs are derived deterministically from a plugin's publisher and name, so built-in plugins serve as reliable anchors that require no prior knowledge of the target system.

inisev Backup Migration

The Backup Migration plugin for WordPress is vulnerable to OS Command Injection in all versions up to, and including, 2.1.5.1 due to insufficient sanitization of the `file` POST parameter on the `restoreBackup()` AJAX handler. The handler applies `esc_attr()` — an HTML-context sanitizer that does not strip shell metacharacters — and concatenates the result, unquoted, into a `php-cli -f … bmi_restore <file> <remote>` command passed to `exec()`. This makes it possible for authenticated attackers, with Administrator-level access (or any user granted the plugin's `do_backups` capability) and above, to execute arbitrary OS commands as the web-server user, bypassing WordPress hardening constants such as `DISALLOW_FILE_EDIT` and `DISALLOW_FILE_MODS` that would otherwise prevent code execution from the admin UI. This is an incomplete fix of CVE-2023-7002, which patched the same pattern only in the `$_POST['url']` path of `handleQuickMigration()`; the equivalent mitigations (`rawurlencode()` + explicit shell-metachar replacement + double-quoting in `exec()`) were never applied to `$backupName`.

cornelraiu-1 Search Analytics for WP

The Search Analytics for WP plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 1.4.16. This is due to missing or incorrect nonce validation on the `process_bulk_action()` function of `MWTSA_Stats_Table`. This makes it possible for unauthenticated attackers to delete arbitrary search-term records, including all associated search-history rows, via a forged request granted they can trick a user with access to the plugin's "Search Analytics" dashboard page (Administrator by default) into performing an action such as clicking on a link.

theotherphil imagecli

imagecli's pipeline operation (Carve::apply in src/image_ops.rs) only asserts , never validating that the ratio is positive. A negative ratio (e.g. -5) causes the computed target width to saturate to 0 via Rust's defined float-to-uint cast, which is then passed to imageproc::seam_carving::shrink_width — a function that panics when given a width below 2, crashing the process.

theotherphil imagecli

imagecli's pipeline operation (Scale::apply in src/image_ops.rs) computes output width/height as (dimension as f32 * ratio) as u32 with no upper-bound validation on the CLI-supplied ratio, which is parsed via nom::number::complete::float with no range check. Any application embedding imagecli as a library and accepting user-controlled pipeline strings is remotely crashable with a single request.

Linux

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate compound request size before reading StructureSize2 When ksmbd validates a compound (chained) SMB2 request, ksmbd_smb2_check_message() reads pdu->StructureSize2 without first checking that the compound element is large enough to contain it. StructureSize2 is a 2-byte field at offset 64 (__SMB2_HEADER_STRUCTURE_SIZE) from the start of each element. The compound-walking logic only guarantees that a full 64-byte SMB2 header is present for the trailing element: when NextCommand is 0, len is reduced to the number of bytes remaining after next_smb2_rcv_hdr_off. A remote client can craft a compound request whose last element has exactly 64 bytes, so the 2-byte StructureSize2 read at offset 64 extends one byte past the receive buffer, producing a slab-out-of-bounds read. BUG: KASAN: slab-out-of-bounds in ksmbd_smb2_check_message (fs/smb/server/smb2misc.c:402) Read of size 2 at addr ffff888012ae31ac by task kworker/0:1/14 The buggy address is located 172 bytes inside of allocated 173-byte region Workqueue: ksmbd-io handle_ksmbd_work Call Trace: ... kasan_report (mm/kasan/report.c:595) ksmbd_smb2_check_message (fs/smb/server/smb2misc.c:402) handle_ksmbd_work (fs/smb/server/server.c:119) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Reject any compound element that is too small to hold StructureSize2 before dereferencing it.

Unknown zportals

The zportals WordPress plugin before 6.3.4 does not properly validate uploaded files, trusting the client-supplied content type and preserving the original file extension, allowing any authenticated user (Subscriber or higher) to upload arbitrary PHP files and achieve remote code execution.

open62541 1.5.5 contains a buffer-overflow in the high-level attribute reading logic in src/client/ua_client_highlevel.c. This allows a remote attacker to cause a denial of service.

An issue in open62541 v.1.5.5 and before allows a remote attacker to cause a denial of service via the UA_Client_getRemoteDataTypes component

open62541 1.5.5 contains an out-of-bounds read in the client-side function responseReadNamespacesArray() in src/client/ua_client_connect.c.