Semaine du 3 août au 9 août 2026

openbao

OpenBao is an open source identity-based secrets management system. Prior to version 2.5.4, in OpenBao's Kerberos auth method on the `GET` handler, or when an `Authorization: Negotiate` header is supplied, the response is includes a `logical.Auth` object in addition to an error message. This results in tokens being created with only the default policy, default TTL, and no entity information, which are hidden by the returned error message. No access to these tokens by the caller occurs and the authentication token is not ever made accessible outside of `sys/raw`. This is fixed in OpenBao v2.5.4. As a workaround, users may set a rate limit quota to limit the creation of these paths. As the path is unauthenticated, it isn't possible to deny access to it.

zephyrproject zephyr

The SF32LB MPI QSPI NOR flash driver (drivers/flash/flash_sf32lb_mpi_qspi_nor.c) validated the flash offset and length on its read and write paths with the test (offset + size) > data->size. Because offset is a signed off_t while size is unsigned, a negative offset is converted to a large unsigned value and the addition can wrap to a small result that passes the check. The read path then performs memcpy(dst, (void *)(data->base + offset), size) and the write path programs flash at offset and cache-invalidates data->base + offset, in both cases accessing memory outside the mapped flash window. The driver's erase path already rejected negative offsets, but read and write did not. In builds with CONFIG_USERSPACE, flash_read and flash_write are syscalls whose verifiers validate the device object and the caller's buffer but deliberately delegate offset bounds checking to the driver. An unprivileged thread that has been granted access to this flash device can therefore call the syscall with a crafted negative offset and a buffer valid in its own memory domain, and reach the unchecked access. The most direct impact is on the read path: by choosing a negative offset and matching size, an attacker slides the memcpy source below the flash base and copies arbitrary CPU-addressable memory into its own buffer, disclosing memory it is not authorized to read. The write path additionally allows programming flash at an out-of-range address and invalidating an attacker-chosen cache range, affecting integrity and availability. Reachability requires userspace to be enabled and the raw flash device object to be granted to an untrusted thread. The fix replaces the check with qspi_nor_range_is_valid(), which rejects negative offsets and performs the bound comparison in overflow-safe 64-bit arithmetic on both paths, and additionally adds an SRAM DMA bounce buffer plus source/destination overlap rejection to prevent a separate DMA bus-hang condition.

TP-Link Systems Inc. Archer A6 v4

An input validation vulnerability exists in the HTTP-WRITEOEM handler due to insufficient validation of user-supplied data before it is processed by internal flash-write handling logic. Successful exploitation may cause httpd process or device to crash, resulting in loss of access to the web interface and a denial-of-service condition.

TP-Link Systems Inc. Archer A6 v4

A denial-of-service vulnerability exists in httpd service on Archer A6 v4 where the asynchronous systool instruction handlng path in httpd does not properly synchronize or safely manage concurrent systool operations.  By sending crafted systool instructions through the asynchronous request path, successful exploitation may cause the httpd process or device management service to crash and may result in temporary loss of access to the web management interface or device reboot.

Adobe Genuine Software Integrity Service

Adobe Genuine Software Integrity Service on Windows is affected by an Incorrect Authorization vulnerability that could result in a Security feature bypass. An attacker could leverage this vulnerability to bypass security measures and gain unauthorized limited write access. Exploitation of this issue does not require user interaction, but requires the attacker to access the target desktop system locally (e.g., keyboard, console), or remotely (e.g., SMB).

honojs hono

Hono is a Web application framework that provides support for any JavaScript runtime. Prior to 4.12.34, the built-in CORS middleware, hono/cors, is vulnerable to a regular expression denial of service (ReDoS). During a preflight OPTIONS request, the middleware parses the attacker-controlled Access-Control-Request-Headers header using a whitespace-tolerant regular expression whose backtracking makes its running time quadratic in the input length. Because the header value is bounded only by the deployment's maximum HTTP header size, a single preflight carrying a long run of whitespace can consume seconds of CPU and block request processing. On runtimes that share one execution thread across requests, this stalls concurrent requests as well, and repeated requests can render the service unresponsive. This affects the default configuration, since the vulnerable path is reached whenever cors() is used with an unset or empty allowHeaders. Applications that set a non-empty allowHeaders are not affected. This issue is fixed in version 4.12.34.

home-assistant core

Home Assistant is open source home automation software focused on local control and privacy. Prior to 2026.6.1, the Android Companion app is vulnerable to an open redirect. The app passes the URL fragment from a homeassistant://invite deep link into the onboarding flow without ever displaying the destination hostname. Because no screen in the invitation or onboarding flow shows the parsed server URL before onboarding commits to it, a victim has no way to distinguish a legitimate invite from a malicious one. An attacker can craft an invite so that a single tap on the legitimate-looking "Connect to my Home Assistant server" button opens their /auth/authorize endpoint in the URL-less onboarding WebView, presenting a look-alike login page that captures the victim's credentials. Since invitations are intended to onboard brand-new users, targets are especially unlikely to notice the substitution. This issue is fixed in version 2026.6.1.

jupyterhub

JupyterHub is software that allows users to create a multi-user server for Jupyter notebooks. Prior to 5.5.0, invalid input to form-based login authenticators can place an unbounded attacker-controlled username in failed-login logs, allowing an unauthenticated attacker to consume logging and storage resources. This issue is fixed in version 5.5.0.

openbao

OpenBao is an open source identity-based secrets management system. Prior to version 2.5.4, OpenBao's inline auth functionality incorrectly redacted audit log entries, resulting in non-auth headers being removed and auth-related headers being retained in cleartext. This requires an attacker to compromise access to the audit device. Operators should review leaked source authentication material and rotate it as appropriate. This is fixed in OpenBao v2.5.4.

HKUDS nanobot

A vulnerability has been found in HKUDS nanobot up to 0.2.1. This affects the function _download_image_data_url of the file nanobot/providers/image_generation.py of the component Provider-returned Image URL Handler. The manipulation leads to server-side request forgery. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of the patch is 5095. It is recommended to apply a patch to fix this issue. The vendor explains: "We confirm that provider-returned image URLs required the same SSRF protections applied to other network retrieval paths. (...) The patch is currently available on main and is planned for the next patch release, v0.3.1."

HKUDS nanobot

A vulnerability was detected in HKUDS nanobot up to 0.2.1. The affected element is the function connect_mcp_servers of the file nanobot/agent/tools/mcp.py of the component MCP enabledTools Scope Handler. Performing a manipulation results in improper access controls. The attack is possible to be carried out remotely. The exploit is now public and may be used. Upgrading to version 0.3.0 is sufficient to fix this issue. The patch is named 4436. You should upgrade the affected component. Multiple issues were reported to the project. They reacted with a high level of professionalism and kindness: "Both reports describe the same root cause: MCP resource and prompt wrappers could be registered outside the intended enabledTools scope. The registration boundary was corrected".

Domoticz

Domoticz versions prior to 2026.3 contains a stored cross-site scripting vulnerability in the mobile dashboard that allows authenticated attackers to inject arbitrary HTML and JavaScript by updating Text or Alert subtype device values through the API. The mobile dashboard renders device data via ng-bind-html with only an nl2br() transform that performs no HTML escaping, allowing attackers to store malicious payloads that execute in any administrator's browser upon viewing the mobile dashboard, enabling session cookie theft and account takeover.

SonicWall Global VPN Client

SonicWall Global VPN Client version 4.10.8.1108 and earlier is vulnerable to an out-of-bounds kernel memory read in the SWIPsec.sys driver, which could allow a local attacker to cause a system crash.

hapifhir org.hl7.fhir.core · hapifhir ca.uhn.hapi.fhir:org.hl7.fhir.validation · hapifhir ca.uhn.hapi.fhir:org.hl7.fhir.validation.cli

HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to 6.9.11, the hidden scan command concatenates attacker-controlled Implementation Guide titles, profile titles, and source references into scan.html without escaping in Scanner.java. As a result, a user who scans an attacker-supplied IG/profile and then opens or publishes the generated local/CI HTML report can trigger stored cross-site scripting, executing attacker-controlled JavaScript in the report's browser context. This issue is fixed in version 6.9.11.

HKUDS nanobot

A security vulnerability has been detected in HKUDS nanobot up to 0.2.1. Impacted is the function ExecTool._guard_command/ExecTool._spawn of the file nanobot/agent/tools/shell.py of the component Shell Allowlist Handler. Such manipulation leads to os command injection. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. Upgrading to version 0.3.0 is recommended to address this issue. The name of the patch is 4562. It is advisable to upgrade the affected component. Multiple issues were reported to the project. They reacted with a high level of professionalism and kindness: "These five reports are variants of the same root cause: validation of shell commands containing multiple segments, wrappers, comments, or chained commands. The issue was fixed by validating every executable shell segment against the configured allowlist".

HashiCorp Consul · HashiCorp Consul Enterprise

Consul Community Edition and Consul Enterprise 1.3.0 through 2.0.2 are vulnerable to an unauthenticated denial of service in several agent HTTP API endpoints. A remote caller could cause the agent to consume substantial memory before the request was rejected. This vulnerability, CVE-2026-19113, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3.

HashiCorp Consul · HashiCorp Consul Enterprise

Consul Community Edition and Consul Enterprise 1.18.21 through 2.0.2 are vulnerable to a partial arbitrary file read when configured to use the Vault Connect CA provider with JWT or AppRole authentication. A privileged attacker with `operator:write` permission may direct Consul to read and forward credential files outside the intended scope, potentially leading to the exfiltration of sensitive secrets from the Consul server host. This vulnerability, CVE-2026-19017, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3.

HashiCorp Consul · HashiCorp Consul Enterprise

Consul Community Edition and Consul Enterprise 1.19.1 through 2.0.2 did not enforce the {{session:write}} ACL permission for session deletion operations submitted through the transaction API. An authenticated caller with network access to the Consul server RPC port could delete arbitrary sessions without holding the required permission. This vulnerability, CVE-2026-19016, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3.

HashiCorp Consul · HashiCorp Consul Enterprise

Consul Community Edition and Consul Enterprise 1.2.0 through 2.0.2 are vulnerable to an uncontrolled resource consumption issue in the Connect CA roots endpoint that may allow a remote caller to grow the agent's Connect CA roots cache without bound, defeating the operator's cache-disable configuration. This vulnerability, CVE-2026-19015, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3.

HashiCorp Consul · HashiCorp Consul Enterprise

Consul Community Edition and Consul Enterprise 1.17.0 through 2.0.2 are vulnerable to an uncontrolled resource consumption issue in the Connect authorization endpoint that may allow a caller to grow the agent's intention-match cache without bound, defeating the operator's cache-disable configuration. This vulnerability, CVE-2026-190124, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3.

HashiCorp Consul · HashiCorp Consul Enterprise

Consul Community Edition and Consul Enterprise 1.18.0 through 2.0.2 are vulnerable to an authenticated denial of service in the Enterprise-to-Community Edition downgrade path that may allow an authorized caller to crash the Consul server. A caller with config-entry write permission can submit a service-router configuration entry that causes the agent to exit unexpectedly. This vulnerability, CVE-2026-19012, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3.

HashiCorp Consul · HashiCorp Consul Enterprise

Consul Community Edition and Consul Enterprise 1.20.1 through 2.0.2 are vulnerable to an L7 intention authorization bypass when a service proxy is configured with a custom public listener. An authenticated mesh workload may reach HTTP paths that are blocked by a path-based deny intention. This vulnerability, CVE-2026-15970, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3.

honojs hono

Hono is a Web application framework that provides support for any JavaScript runtime. From 3.8.0 to 4.12.33, memo() from hono/jsx retains the result of a server side render and reuses it for later renders with comparator equal props, and request scoped values read inside the component take no part in that comparison, so a response can contain HTML rendered for another user's request. Components wrapped with memo() are compared by props alone; values read implicitly during rendering, such as JSX Context through createContext() and useContext(), useRequestContext() from hono/jsx-renderer, and getContext() from hono/context-storage, do not participate, and the retained result lives as long as the wrapped component, so it outlives the request that produced it. A user may receive a response containing HTML rendered for another user when both render the same memoized component with comparator equal props on the same warm instance, which may disclose another user's account or profile data, disclose request scoped secrets embedded in HTML such as CSRF tokens, or expose role specific content to users who should not receive it. This issue is fixed in version 4.12.34.

honojs hono

Hono is a Web application framework that provides support for any JavaScript runtime. From 4.12.0 to 4.12.33, the languageDetector middleware is vulnerable to algorithmic complexity denial of service when processing a crafted language tag containing a large number of hyphen separated subtags. To implement progressive language tag truncation, normalizeLanguage() repeatedly calls parts.slice(0, i).join('-') for every possible prefix, so the total amount of string processing grows quadratically with the number of subtags. Language values may come from a query parameter, cookie, Accept-Language header, or URL path, depending on the detector configuration, and the default detector order enables query string, cookie, and header detection, so applications using languageDetector() may expose this processing to unauthenticated requests. An attacker may repeatedly send requests containing long, hyphen separated language tags, causing excessive CPU consumption and preventing unrelated requests from being processed. This issue is fixed in version 4.12.34.

TestLinkOpenSourceTRMS TestLink

TestLink 1.9.20 and prior contains an insecure direct object reference vulnerability that allows any authenticated user, including low-privilege guest accounts, to read arbitrary attachments by supplying an integer attachment ID to the attachmentdownload.php handler without any project or role authorization check. Attackers can enumerate sequential integer IDs through the attachment download endpoint to retrieve file contents from private projects they have no membership in, bypassing the per-project access control model and exposing test specifications, requirements documents, execution evidence, and other sensitive uploaded files across the entire installation.

getkirby kirby

Kirby is an open-source content management system. Prior to 4.9.5 and from 5.0.0 through 5.5.1, the REST API error handler can return unsanitized PHP error messages that expose the full filesystem path of the Kirby installation to unauthenticated API users. This vulnerability affects all Kirby sites that have not disabled the REST API with the 'api' => false option. This issue is fixed in versions 4.9.5 and 5.5.2.

ATN-B1 CPDLC

Malformed or out-of-sequence frames at the Aviation Very High Frequency Link Control X.25 layers cause repeated resets which may result in increased workload and reduced situational awareness. This type of attack can be carried out remotely over radio frequency.

ATN-B1 CPDLC

Broadcast control frames can disconnect multiple aircraft simultaneously leading to delayed clearances and air traffic controller overload. This type of attack can be carried out remotely over radio frequency.

ATN-B1 CPDLC

Unnumbered Disconnect (U DISC) and malformed Aviation Very High Frequency Link Control frames can terminate sessions and lead to a loss of CPDLC functions requiring a reversion to voice communication and increased controller workload. This type of attack can be carried out remotely over radio frequency.

frappe

Frappe is a full-stack web application framework. Prior to 16.20.0 and 15.112.0, unrestricted access to a Document Follow API (update_follow) is possible for an authenticated user. This issue is fixed in versions 16.20.0 and 15.112.0.

netty · Netty netty

Netty is an asynchronous, event-driven network application framework. Prior to 4.1.136.Final and 4.2.16.Final, the RedisArrayAggregator Redis codec clears retained partial aggregate state when the maxNestedArrayDepth limit is exceeded, but it does not clear the same state when the sibling maxElements limit is exceeded. A peer can start a valid RESP array, send a bulk string child, then send a nested array header longer than the configured maxElements. Netty throws a decoder exception in decodeRedisArrayHeader, but the existing partial aggregate remains retained in the handler. If the application leaves the channel alive after the exception, later messages are still consumed into the pre-error aggregate, allowing an unauthenticated peer to keep attacker-controlled aggregate state alive across a security-limit exception and pin retained pooled buffers. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final.

Datadog Android App

In versions of the Datadog Android application prior to v545-5.9.2, the app tags Crashlytics data with the user's Datadog UUID, with no user-facing opt-out. Impact: The Datadog user UUID and crash data are visible within Firebase Crashlytics. This UUID is not identifying outside Datadog's own systems.

Datadog Android App

In versions of the Datadog Android application prior to v541-5.9.2, the exported launcher activity AppActivity accepts an attacker-supplied session (including OAuth tokens) from Intent extras with no permission guard, and signs the app into that session without validating it against the backend. This requires a malicious application co-installed on a device with the Datadog app installed, and an OAuth token the attacker is willing to load into the victim's app. Impact: A co-installed application can switch the victim's Datadog app to a session the attacker controls. This is an account-confusion issue; it does not by itself expose the victim's existing session or data.

Datadog Android App

In versions of the Datadog Android application prior to v554-5.9.4, two Room-backed SQLite databases store sensitive content in plaintext: LocalNotificationDatabase (notification title, message, recipient, service, tags, and on-call/incident deep links) and SearchRecentDatabase (the user's full in-app search history). Impact: Any actor able to bypass the app sandbox can read these databases in plaintext.

Datadog Android App

In versions of the Datadog Android application prior to v541-5.9.2, BubbleChatActivity is exported with no permission guard and accepts a SEND intent with a caller-supplied conversation_id. When the activity closes and no in-process session matches that ID, it unconditionally cancels notification ID 9201 (the Bits AI chat notification), with no check on the caller's identity or ownership of the conversation. This requires a malicious application co-installed on the victim's device. Impact: A co-installed application can silently dismiss the victim's Bits AI chat notification. No chat content is exposed; conversation data remains server-authentication gated and is never returned to the caller.

Datadog Android App

In versions of the Datadog Android application prior to v545-5.9.2, six App Widget configuration activities (IncidentWidgetActivity, MonitorSavedViewWidgetActivity, OnCallShiftsWidgetActivity, OnCallPagesWidgetActivity, SloWidgetActivity, DashboardWidgetActivity) are exported with no permission guard. Each accepts a caller-supplied AppWidgetManager.EXTRA_APPWIDGET_ID and, when no deep-link destination is resolved, uses it to load the matching widget's stored session and automatically log in as that user. Because Android widget IDs are small sequential integers, a co-installed application can brute-force this value to find one that matches a widget configured on the victim's device. This requires: A malicious application co-installed on the victim's device. At least one of the six widgets configured on the victim's home screen. An active Datadog session cached locally. Impact: The matching configuration activity opens in the foreground under the victim's session and renders live infrastructure data. Exposure is limited to a visual side channel (e.g., screen recording or accessibility services); the calling application cannot programmatically read the rendered data.

Datadog Android App

In versions of the Datadog Android application prior to v545-5.9.2, OnCallNotificationActivity is declared exported with no permission guard. A co-installed application can launch it with attacker-controlled Intent extras, including a full-screen lock-screen message, an arbitrary on-call page ID, and an arbitrary Intent to run inside the Datadog process. This requires: A malicious application co-installed on the victim's device. An active Datadog session in the Android app. Impact: After a single tap on the Acknowledge button, the app sends a forged on-call acknowledgement to the backend under the victim's session, launches the attacker-supplied Intent from within the Datadog process (reaching otherwise non-exported components), and turns on the screen while dismissing the keyguard.

SourceCodester Online Clothing Store

A vulnerability was determined in SourceCodester Online Clothing Store. Affected by this issue is some unknown functionality of the file /_notes/ of the component Dreamweaver Metadata Files. Executing a manipulation can lead to file and directory information exposure. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized.

WonderTrader

A vulnerability was identified in WonderTrader up to 0.9.9. Affected is the function _undone_qty in the library src/WtCore/TraderAdapter.h of the component Pending Order Handler. The manipulation of the argument getUndoneQty leads to enforcement of behavioral workflow. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

go-git

go-git is an extensible git implementation library written in pure Go. Prior to 5.19.2 and 6.0.0-alpha.5, reference names are not sanitized before being used to construct on-disk paths under the reference storage directory, so a maliciously crafted reference name (for example containing directory-traversal sequences) can cause go-git to write files outside the intended reference storage directory. Versions 5.19.2 and 6.0.0-alpha.5 fix the issue.

sveltejs kit

SvelteKit is a framework for rapidly developing robust, performant web applications using Svelte. Prior to 2.70.2, the content negotiation header parser used by SvelteKit's request handling (for headers such as Accept) uses a regular expression vulnerable to quadratic backtracking, so a maliciously crafted header value can cause excessive CPU consumption and degrade or deny service. Version 2.70.2 fixes the issue.

WonderTrader

A vulnerability was determined in WonderTrader up to 0.9.9. This impacts an unknown function of the file src/Includes/WTSTradeDef.hpp of the component TraderATP Cash Trade Conversion. Executing a manipulation of the argument m_offsetType can lead to use of uninitialized variable. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

Sonatype Nexus Repository 3 · Sonatype nexus repository manager

Sonatype Nexus Repository 3 did not properly filter internal configuration keys from user-supplied task properties when creating or updating a scheduled task through the administrative UI. An account holding permission to create at least one scheduled task type could supply a crafted property value that caused the system to overwrite the configuration of an unrelated, existing task instead of creating a new one.

Sonatype Nexus Repository 3 · Sonatype nexus repository manager

Nexus Repository 3 was found to be vulnerable to stored cross-site scripting (XSS). A user with the nexus:blobstores:create or nexus:blobstores:update permission could set a blob store name containing malicious script content, which would later execute in the browser of another user viewing system health-check status. This issue has been fixed in version 3.95.0.

Sonatype Nexus Repository 3 · Sonatype nexus repository manager

Nexus Repository 3 CE/Pro versions 3.0.0 through 3.94.x contain an incorrect authorization vulnerability (CWE-863) in the repository-creation user interface. An individual user account holding a delegated repository-admin privilege scoped to a specific repository format could create a repository of a different, unauthorized format, because authorization was checked against one request field while a separate, attacker-controlled field determined the repository format actually created. This does not affect the anonymous user, which cannot hold this privilege by default. Fixed in version 3.95.0.

frappe

Frappe is a full-stack web application framework. Prior to 16.20.0 and 15.112.0, a field-level permissions bypass exposes restricted DocType fields. This issue is fixed in versions 16.23.0 and 15.112.0.

smarty-php smarty

Smarty is a template engine for PHP, facilitating the separation of presentation (HTML/CSS) from application logic. From 5.0.0 until 5.8.4, Smarty's stream: resource-name handling does not adequately restrict which PHP stream wrappers and filter chains can be referenced from a template, allowing a php://filter-wrapped resource name to be used to read the contents of arbitrary local files accessible to the PHP process. An attacker able to author or influence a template's resource reference could exploit this to disclose sensitive file contents outside the intended template/config scope. This issue is fixed in version 5.8.4.

smarty-php smarty

Smarty is a template engine for PHP, facilitating the separation of presentation (HTML/CSS) from application logic. Prior to 5.8.2 (and 4.5.7 on the 4.x line), Security::_checkDir() does not fully resolve symbolic links before validating that a requested path lies within a configured secure directory. An attacker able to place or reference a symlink within a directory Smarty treats as trusted (e.g., a template or config directory) could use it to point outside the intended secure directory, bypassing the containment check and reading arbitrary files accessible to the PHP process. This issue is fixed in versions 5.8.2 and 4.5.7.

dartiss code-embed

The Code Embed WordPress plugin prior to version 2.6.1 is vulnerable to stored Cross-Site Scripting (XSS) through the external URL embed feature in post content. The vulnerable code scans rendered content for URL embed tokens, fetches the remote URL, and inserts the remote response body into the page without output sanitization or an `unfiltered_html` capability check. This allows a Contributor attacker to submit a pending post containing an inert-looking URL token that executes attacker-controlled JavaScript when an Administrator or Editor previews or reviews the post. This is distinct from CVE-2026-2512, which affected custom field meta values up to version 2.5.1. This vector affects version 2.6 and uses the documented external URL embed feature in post content. This particular issue is patched in version 2.6.1.

SourceCodester Photo Share Website

A vulnerability has been found in SourceCodester Photo Share Website 1.0. The impacted element is an unknown function of the file /social/ajax.php?action=save_upload. Such manipulation of the argument img[]/imgName[] leads to unrestricted upload. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A lack of tenant separation in SuperTokens Inc. SuperTokens Core v6.0.0 to v11.4.0 allows an authenticated party in one tenant to access sessions, data, and endpoints of another tenant.

MZ Automation libiec61850

A security flaw has been discovered in MZ Automation libiec61850 up to 1.6.1. This affects the function SVReceiver_stopThreadless of the file src/sampled_values/sv_subscriber.c of the component ASDU Element Handler. Performing a manipulation results in heap-based buffer overflow. The attack must be initiated from a local position. The exploit has been released to the public and may be used for attacks. Upgrading to version 1.6.2 is able to mitigate this issue. The patch is named a96bd674e0238276dd1387d31d52e55229d0771e. The affected component should be upgraded.

OPeNDAP Inc. hyrax-docker

OPeNDAP Hyrax allows SSRF and credential disclosure via unvalidated HTTP redirects that bypass the AllowedHosts allowlist and leak Earthdata headers (User-Id, Echo-Token) to attacker-controlled endpoints.

Dell OpenManage Server Administrator Managed Node (Patch) for Windows · Dell OpenManage Server Administrator Managed Node for RHEL 8.10 · Dell OpenManage Server Administrator Managed Node for RHEL 9.4 · Dell OpenManage Server Administrator Managed Node for SLES 15

Dell OpenManage Server Administrator, versions prior to 11.1.0.2, contains a Relative Path Traversal vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Filesystem access for attacker.

dartiss shareopenly

The ShareOpenly WordPress plugin prior to version 1.2.1 contains a Cross-Site Scripting vulnerability caused by the absence of WordPress's `esc_url()` escaping function on the `$url` variable before it is rendered into HTML content. This variable is constructed from `home_url( add_query_arg( array(), $wp->request ) )` and is concatenated directly into an HTML `href` attribute on every singular post or page where the plugin's sharing link is displayed. WordPress's security handbook mandates that every URL placed in HTML output must be passed through `esc_url()`, which both HTML-encodes special characters (converting `"`, `<`, `>` into their safe HTML entity equivalents) and strips dangerous URI schemes such as `javascript:` and `data:`. The omission of this function means that if the `$url` value ever contains HTML-special characters or a dangerous URI scheme — through a `home_url` WordPress filter applied by another plugin or theme, through certain web server or hosting configurations, or through future code changes — the unescaped content will be injected verbatim into the rendered HTML of every post or page on the site. Version 1.2.1 contains a patch for the issue.

Tobit Laboratories AG TeamDavid

Tobit Laboratories AG TeamDavid's Webbox application is vulnerable to a stored XSS vulnerability. An attacker can send an email containing malicious JavaScript code. When a user accesses the email, the stored cross-site scripting is triggered. This issue affects TeamDavid before Rollout 528. Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality.

Tobit Laboratories AG TeamDavid

Tobit Laboratories AG TeamDavid's Webbox application contains a reflected cross-site scripting (XSS) vulnerability. By sending a specially crafted link including an arbitrary path, an XSS payload or the parameter “EntryInfo”, and the parameter “!templateName=entryMail”, an attacker can cause the payload to execute in the victim’s browser when they click the link. This issue affects TeamDavid before Rollout 528. Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality.

Tobit Laboratories AG TeamDavid

Tobit Laboratories AG TeamDavid's Webbox contains an open redirect vulnerability via the “replyUrl” parameter. An attacker can exploit this vulnerability to craft a URL within the application that, when visited, redirects the user’s browser to an arbitrary third-party site. This can be abused for phishing attacks, where users receive a trusted domain link but are redirected to a phishing website. This issue affects TeamDavid before Rollout 528. Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality.

Tobit Laboratories AG TeamDavid

Tobit Laboratories AG TeamDavid's Webbox application is vulnerable to HTTP header injection through the “cType” URL parameter, which allows arbitrary modification of the Content-Type header in HTTP responses. Because the parameter does not properly restrict control characters such as URL-encoded newlines (“%0a”) or colons, attackers can inject additional headers including extra Location headers into the server’s response. This results e.g. in an open redirect vulnerability. This issue affects TeamDavid before Rollout 528. Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality.

Tobit Laboratories AG TeamDavid

Tobit Laboratories AG TeamDavid's Webbox 's move archive functionality (“!ArcEntryMove”) accepts an arbitrary path, which can be set to network locations using UNC paths (e.g., “\\Server\Share”). The server processes these paths without validation, resulting in outbound connection attempts to attacker-controlled SMB servers. This enables au-thenticated attackers to trigger the server to authenticate to arbitrary SMB endpoints, potentially exposing NTLM authentication information (such as NTLM hashes). If outbound connections to port 445 (SMB) are permitted, attackers can use this to conduct SMB relay or credential theft attacks. Exploitation of the “pathname” parameter is possible without authentication. This issue affects TeamDavid before Rollout 528. Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality.

Tobit Laboratories AG TeamDavid

Tobit Laboratories AG TeamDavid's Webbox 's sending email, fax, SMS, etc. functionality accepts a @@INCLUDE command, which can be set to network locations using UNC paths (e.g., “\\Server\Share”). The server processes these paths without validation, resulting in outbound connection attempts to attacker-controlled SMB servers. This enables authenticated attackers to trigger the server to authenticate to arbitrary SMB endpoints, potentially exposing NTLM authentication information (such as NTLM hashes). If outbound connections to port 445 (SMB) are permitted, attackers can use this to conduct SMB relay or credential theft attacks. Exploitation of the “pathname” parameter is possible without authentication. This issue affects TeamDavid before Rollout 528. Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality.

Tobit Laboratories AG TeamDavid

Tobit Laboratories AG TeamDavid's Webbox 's link storing functionality (//ServerClient_celink.htm) accepts a “pathname” parameter, which can be set to network locations using UNC paths (e.g., “\\Server\Share”). The server processes these paths without validation, resulting in outbound connection attempts to attacker-controlled SMB servers. This enables authenticated attackers to trigger the server to authenticate to arbitrary SMB endpoints, potentially exposing NTLM authentication information (such as NTLM hashes). If outbound connections to port 445 (SMB) are permitted, attackers can use this to conduct SMB relay or credential theft attacks. Exploitation of the “pathname” parameter is possible without authentication. This issue affects TeamDavid before Rollout 528. Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality.

Tobit Laboratories AG TeamDavid

Tobit Laboratories AG TeamDavid's Webbox does not enforce authentication or authorization checks when serving these log files. As a result, attackers can obtain sensitive error information or internal application details, potentially aiding in further attacks. This issue affects TeamDavid before Rollout 528. Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality.

Tobit Laboratories AG TeamDavid

Tobit Laboratories AG TeamDavid's Webbox is vulnerable to HTTP header injection through the request body in the application's link storing functionality (//ServerClient_celink.htm), which is appended to the redirect target in the 302 HTTP response. If a line feed is added, this will also be added to the redirect link, resulting in the ability to control the response headers. This issue affects TeamDavid before Rollout 528. Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality.