Veille CVE

Recherche « ISC BIND 9 »

57 CVE

Critique 8 Élevée 23 Moyenne 17 Faible 0 Non évaluée 9 Exploitées (KEV) Tri : plus récentes « ISC BIND 9 » ✕
  1. CVE-2026-97313 7.5 Élevée

    ISC BIND 9

    A recursive BIND server that receives a query with recursion desired (RD=1) followed by a non-recursive query (RD=0) may exit with an assertion failure, resulting in a denial of service. To be vulnerable, the BIND server must allow recursive queries and have at least two RPZ zones configured: one with the default setting of "recursive-only yes", and the other with "recursive-only no". This issue affects BIND 9 versions 9.16.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1.

  2. CVE-2026-96888 7.5 Élevée

    ISC BIND 9

    A BIND resolver that is configured with both a "redirect" zone and "qname-minimization strict" may abort with an assertion failure while processing the redirect. This issue affects BIND 9 versions 9.16.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.16.8-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1.

  3. CVE-2026-94300 8.1 Élevée

    ISC BIND 9

    Replaying GSS-TSIG signed UDP messages can result in memory corruption in "`named`". An attacker who can capture a previously signed UDP message can replay it while the negotiated TSIG key is still valid. By also sending crafted queries to a zone the attacker controls, the attacker may potentially achieve remote code execution. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1.

  4. CVE-2026-19630 7.5 Élevée

    ISC BIND 9

    In a BIND resolver, inbound DNS protocol messages with a particular structure will result in additional processing, with no limit imposed by BIND. A DNS message with a maliciously large number of such structures will cause BIND to consume disproportionate amounts of CPU time and memory during processing. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1.

  5. CVE-2026-111761 5.8 Moyenne

    a2aproject a2a-java

    A2A Java SDK is the official Java SDK for the Agent2Agent (A2A) Protocol. Prior to 1.3.0.Final, BasePushNotificationSender in server-common sends task data to the URL in TaskPushNotificationConfig without destination validation, scheme restrictions, or bounds on redirects. InMemoryPushNotificationConfigStore.setInfo stores the URL verbatim, and onCreateTaskPushNotificationConfig does not validate the destination. In the default deployment with push notifications enabled, an unauthenticated caller can register a destination through an inline SendMessage configuration or CreateTaskPushNotificationConfig for an existing task, causing task status and artifact updates to send requests from the server's network position to loopback, private, link-local cloud-metadata, IPv6 unique-local, unspecified, or multicast destinations where routing permits. JdkA2AHttpClient and VertxA2AHttpClient follow redirects, allowing a webhook redirect to bypass creation-time destination checks and convert a POST into a GET; hostname-only checks also do not prevent DNS rebinding. Direct POST delivery can push attacker-influenced task data into internal services, whereas a redirected POST-to-GET request drops the body. The sender discards the fetched response and does not expose delivery success or failure, so the demonstrated behavior does not provide response read-back. No credentials or user interaction are required. This issue is fixed in version 1.3.0.Final.

  6. CVE-2026-86467 – Non évaluée

    Apache Software Foundation Apache Airflow Amazon provider

    Apache Airflow Amazon provider: the AWS auth manager's SAML login flow does not bind the authentication response to the browser that began it. The login handler discards the AuthnRequest ID and the callback validates the assertion without requiring a matching InResponseTo, so an unauthenticated attacker who can cause a victim to load a page can complete a SAML login in the victim's browser using the attacker's own assertion, silently logging the victim into the attacker's Airflow account. Subsequent work the victim performs lands in a session the attacker controls. Affects deployments using the AWS auth manager with SAML authentication. The victim needs only to visit an attacker-controlled page; no Airflow account or credential is required of the attacker. This is the same login-CSRF class fixed in the Keycloak auth manager as CVE-2026-40948. Users of apache-airflow-providers-amazon are recommended to upgrade to version 9.38.0, which fixes the issue.

  7. CVE-2026-103091 9.3 Critique

    Google SAM

    Missing Authorization (CWE-862) and Initialization of a Resource with an Insecure Default (CWE-1188) in the MCP proxy (HandleStreamPassThrough in mcp_service.go) and OIDC registration flow (GET /info and POST /register in internal/controlplane/server.go) in Google OSS Agent Mesh (SAM) versions 0.1.0-alpha.1 through 0.1.0-alpha.8 allow a remote attacker to self-enroll into the mesh and invoke arbitrary tools across all connected MCP backend nodes. Because GET /info publicly discloses OIDC configuration, POST /register auto-enrolls any valid OIDC token holder without claim filtering or ban checks, and the default policy binds sam:system:authenticated to wildcard services and targets, an attacker can obtain a mesh credential with full read, write, and execution access on backend services. Users should upgrade to version 0.1.0-alpha.9 or later, which enforces a fail-closed default policy, explicit policy-binding requirements on enrollment, and ban checks.

  8. CVE-2026-98734 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize SCO and ISO scheduling with teardown hci_low_sent() selects a connection under RCU but drops the read lock before calculating its quota and returning it to the scheduler. The connection is then used without lifetime protection by hci_sched_iso() and hci_sched_sco(). After the TX worker drops the RCU read lock, hci_abort_conn_sync() on hdev->req_workqueue can remove the connection from the hash, complete synchronize_rcu(), purge its queues and release it. The TX worker on hdev->workqueue can then access the freed connection in hci_quote_sent() or while dequeuing packets and updating conn->sent. KASAN reported: BUG: KASAN: slab-use-after-free in hci_low_sent+0x730/0x840 Workqueue: hci0 hci_tx_work Call Trace: hci_low_sent+0x730/0x840 hci_sched_iso+0x25e/0x4d0 hci_tx_work+0x239/0xcb0 Allocated by task 93: __hci_conn_add+0x16f/0x1b40 hci_bind_bis+0x782/0x17b0 hci_connect_bis+0xa0/0x510 iso_sock_connect+0x589/0x1050 Freed by task 88: kfree+0x131/0x3c0 device_release+0xc8/0x240 kobject_put+0x14d/0x280 hci_conn_del+0x55a/0xe80 hci_disconnect_sync+0x156/0x180 hci_abort_conn_sync+0x3e7/0x940 hci_cmd_sync_work+0x13c/0x290 Hold hci_dev_lock() across connection selection and transmission in both SCO and ISO scheduling, serializing them with connection teardown. This also prevents queuing completion timestamps after the connection queues have been purged. Extending RCU across transmission would be unsafe because the transmit path can sleep. Keep the ISO timeout check outside the mutex since hci_link_tx_to() takes it itself. The preceding channel fix already holds this mutex in the ACL and LE schedulers, which call the SCO scheduler between packets. Move the SCO body to __hci_sched_sco(), assert that its caller holds the mutex, and use it directly from these locked paths. Keep a locking hci_sched_sco() wrapper for the direct calls from hci_tx_work(). This avoids recursively acquiring the device mutex while preserving the scheduling order. Remove the obsolete claim that connection removal disables TX.

  9. CVE-2026-98616 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: reset num_napi when the napi vectors are freed fbn->num_napi is the count of live napi vectors, each of which owns an IRQ. The PM path had freed them without clearing the count. fbnic_pm_suspend() tears the datapath down via ndo_stop() and frees the IRQs, but leaves netif_running() true so resume knows to re-open. Resume rebuilds the datapath in __fbnic_pm_resume() and fbnic_reset_queues() sets num_napi and __fbnic_open() re-allocates the vectors. When the datapath is torn down but never rebuilt, num_napi is left pointing at freed vectors under 2 different scenarios: - a PCIe error recovery that fails (fbnic_err_slot_reset() -> __fbnic_pm_resume() returns an error -> PCI_ERS_RESULT_DISCONNECT), so .resume never runs; or - an __fbnic_open() that fails partway on resume and unwinds, freeing the vectors after fbnic_reset_queues() has already set num_napi. The netdev is then running with num_napi > 0 but napi[] freed, and the eventual remove/unbind close re-enters fbnic_down() -> fbnic_dbg_down() and dereferences the freed vectors: BUG: kernel NULL pointer dereference, address: 0000000000000210 RIP: fbnic_dbg_down+0x28 Clear num_napi when the vectors are freed: in the suspend teardown (a good resume re-establishes it before __fbnic_open()) and on the resume open failure. A redundant ndo_stop() then walks an empty napi[]. The normal ndo_stop() down/up cycle is untouched and keeps num_napi for the next ndo_open().

  10. CVE-2026-98610 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_hfsc: bound the classify inner-filter walk with a drift budget hfsc_classify() applies the "filter may only point downwards" level check only when the filter result carries no bound class. A filter created with a flowid gets res.class set once at bind time, so the check never runs for it during classification. hfsc_adjust_levels() can later raise a class's level without revalidating existing bindings, leaving two binds that were each legal at bind time pointing at each other; the classify walk then bounces between two interior classes forever with the qdisc lock held and BH disabled — a soft lockup from a single packet. The stuck walk trips the watchdog: watchdog: BUG: soft lockup - CPU#3 stuck for 13s! [ping:444] RIP: 0010:u32_classify+0x542/0x17f0 ... tcf_classify+0x66/0xa0 hfsc_enqueue+0x166/0xdf0 Bound the traversal with a budget of non-descending hops, the only way a configured walk can move without descending the class tree once levels drift after bind time. The budget is cumulative over the whole walk and is deliberately not reset on a descending hop: a chain that alternates a descent with a lateral hop would return the budget every lap and never trip. Descending hops never decrement it, so legitimately deep trees are unaffected and a terminating lateral chain still classifies normally. Drop the packet with a rate-limited warning once the budget is exhausted, mirroring the merged HTB fix. This is a follow-up to commit 729c4896ab82 ("net/sched: sch_htb: limit htb_classify inner-class filter hops"), which bounded the same classify loop on the HTB side but left the HFSC walk unbounded. Conditions to recreate the bug: - CONFIG_NET_SCHED, CONFIG_NET_SCH_HFSC, CONFIG_NET_CLS_U32, CONFIG_LOCKUP_DETECTOR. - Build a cycle with two legal-at-bind-time flowid binds and a level drift: class X 1:1 (child of root) with leaf child 1:10; class Y 1:2 (sibling of X) with children 1:20 and 1:200; root u32 filter flowid 1:1; filter on X flowid 1:2 (legal when Y is a leaf); after Y's level rises to 2, filter on Y flowid 1:1 (legal then). Send one packet (ping on the device). Unfixed kernel: classify spins with the qdisc lock held; with softlockup_panic=1 it panics. - Reachable from unprivileged user via unshare -Urn (CAP_NET_ADMIN).

  11. CVE-2026-98595 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: udp: remove a disconnected socket from the 4-tuple hash table A UDP socket bound to a specific address and port keeps its entry in the 4-tuple hash table after it is disconnected: sk binds to 127.0.0.1:21001 sk connects to 127.0.0.2:20001 // filed in the 4-tuple table sk disconnects, connect(AF_UNSPEC) // still filed, peer now 0.0.0.0:0 __udp_disconnect() takes a socket out of that table only as a side effect of ->rehash() or ->unhash(), and it skips ->rehash() when SOCK_BINDADDR_LOCK is set and ->unhash() when SOCK_BINDPORT_LOCK is set. commit 6996a2d2d0a6 ("udp: Unhash auto-bound connected sk from 4-tuple hash table when disconnected.") fixed the same end state for a wildcard-bound socket, by a path this one does not take. The entry is counted whether or not anything hits it. hash4_cnt on the hash2 slot stays raised for as long as the socket lives, so udp_has_hash4() keeps sending every packet for that address and port through the 4-tuple lookup first. On IPv6 it can also be hit. __udp_disconnect() does not clear sk_v6_daddr, so udp_v6_rehash() files the entry under the peer the socket was connected to with a zero dport, and inet6_match() compares that same field: a datagram from the former peer with a zero source port matches, and source port zero is accepted on receive. On IPv4 the peer is cleared, so a match would need a zero source address as well, which the routing layer rejects as martian. The stale sk_v6_daddr is a separate defect, not addressed here; removing the entry closes this path either way. The entry can also be relocated. __udp_disconnect() clears sk_bound_dev_if, so a subsequent SO_BINDTODEVICE calls ->rehash(), and because the receive address is still specific udp_lib_rehash() moves the entry instead of removing it, into the bucket that (rcv_saddr, num, 0, 0) hashes to -- a pure function of the address and port, so every socket reaching this state on one address and port collects in one bucket. The bucket cannot be chosen from outside, as udp_ehashfn() is seeded with a per-boot secret. This last one became reachable only with commit 644f9108f3a5 ("udp: Make rehash4 independent in udp_lib_rehash()"), which moved the hash4 handling out of a branch a disconnected socket does not take; the stale entry itself dates from the commit in Fixes. Take the socket out of the table before __udp_disconnect() runs, while it still matches how it was filed. This also reaches the wildcard case ahead of udp_lib_rehash()'s udp_unhash4() branch, leaving that branch unreachable from udp_disconnect(); removing it belongs in net-next. udp_disconnect() and udp_abort() are the only UDP entries into __udp_disconnect(), which is shared with raw, ping and l2tp sockets that are not struct udp_sock: ping_prot.obj_size is sizeof(struct inet_sock), so udp_hashed4() on one would read past the allocation.

  12. CVE-2026-98459 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: balance the parent hold in hci_bind_bis() hci_conn_link() takes a lifetime reference to its parent with hci_conn_get(), but only takes an operational hold on the child. hci_conn_unlink() later balances both a hold and a reference on the parent. The SCO and CIS paths pass a parent acquired from a connect helper, so it already has a hold. For an additional BIS, hci_bind_bis() obtains the parent from hci_conn_hash_lookup_big(), which returns a bare pointer. Unlinking the child then drops the parent's existing hold and can schedule it for disconnection while its socket is still using it. Take a hold on the parent before linking it and drop that hold if linking fails. A successful link transfers the hold to hci_conn_unlink().

  13. CVE-2026-19601 4.9 Moyenne

    Mattermost

    Mattermost versions 11.9.x <= 11.9.1, 11.8.x <= 11.8.5, 11.7.x <= 11.7.10, 11.10.x <= 11.10.1 fail to invalidate the stored AD/LDAP bind password when other connection settings (such as the server address) are changed, which allows a System Console administrator to disclose the plaintext bind password to an attacker-controlled server via the Test Connection / diagnostics feature. Mattermost Advisory ID: MMSA-2026-00764

  14. CVE-2026-55239 8.8 Élevée

    msgbyte tianji

    Tianji is an open source analytics, uptime monitoring, and server status platform. Prior to 1.31.29, the getDateQuery() function in src/server/utils/prisma.ts constructs raw SQL through Prisma.sql() by interpolating the timezone request value without parameter binding. The timezone value can reach affected analytics queries through request data or the timezone HTTP header, and workspaceProcedure permits any authenticated workspace member, including a read-only viewer, to reach those queries. An attacker can execute arbitrary SQL against the shared PostgreSQL database, which can disclose or modify credentials, API keys, and tenant data or make the service unavailable. This issue is fixed in version 1.31.29.

  15. CVE-2026-89140 6.0 Moyenne

    Temporal Technologies, Inc. Temporal Server

    Temporal Server does not bind internal completion callbacks to the namespace that attached them, which allows an authenticated caller with write permission in one namespace to alter Scheduler V2 schedule state in another namespace. The callback address temporal://internal is reserved for callbacks that Scheduler V2 attaches to the Workflows it starts. In affected releases, any authenticated caller could attach a callback with that address to a Workflow start request, the address was exempt from the component.callbacks.allowedAddresses allowlist, and the History service delivered the callback to the component its token named, in whatever namespace that was, without authorizing the original caller there. When the forged completion matches an action a target schedule is running, the schedule records the action as completed while its Workflow still runs, which can defeat an overlap policy such as SKIP, and passes caller-controlled data to the next scheduled Workflow as its last completion result. A forged failure may also pause a schedule configured to pause on failure. A forgery requires the target namespace identifier, the schedule identifier, and the identity and timing of a running action. No disclosure of Workflow payloads or history was identified. Only namespaces that hold Scheduler V2 schedules can be targeted; Scheduler V2 is off by default, and existing Scheduler V2 schedules remain targets after the settings that create them are turned off.

  16. CVE-2026-109239 5.3 Moyenne

    unclecode crawl4ai

    Crawl4AI before 0.9.4 contains a blind server-side request forgery vulnerability in RobotsParser.can_fetch that lets unauthenticated attackers bypass Docker server egress controls. Attackers can enable check_robots_txt and use redirects or DNS rebinding to reach internal, loopback, or cloud-metadata addresses for service discovery.

  17. CVE-2026-107292 6.4 Moyenne

    pydantic-ai · pydantic-ai-slim · Pydantic pydantic ai

    Pydantic AI is a Python agent framework for building applications and workflows with Generative AI. From 1.34.0 until 2.30.0, the Agent.to_web() and clai web development chat server does not validate the Host header, allowing a website visited by a developer to use DNS rebinding to reach a loopback-hosted agent as a same-origin service. The hostile page can read the served UI and submit chat requests that execute agent tools with the local process's privileges and credentials, causing data disclosure or unwanted side effects. Binding to localhost, Origin checks, and CSRF tokens do not prevent the same-origin DNS rebinding path. This issue is fixed in versions 1.107.5 and 2.30.0.

  18. CVE-2026-98276 7.8 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: net: lock the socket in sock_gettstamp() sk->sk_flags must only be changed while holding the socket lock, because sock_set_flag() and sock_reset_flag() use non atomic operations (__set_bit() and __clear_bit()). sock_gettstamp() is one of the last places where a bit of sk->sk_flags is changed from a syscall without owning the socket lock, through sock_enable_timestamp(sk, SOCK_TIMESTAMP). sk_set_memalloc() and sk_clear_memalloc() also change sk->sk_flags without the socket lock, but their callers (nbd, iscsi_tcp, nvme-tcp, sunrpc, wireguard) need a careful audit, this will be addressed in a separate patch. Jungwoo Lee and Wongi Lee reported an UDP socket use-after-free caused by this bug: a SIOCGSTAMPNS_NEW ioctl racing with bind() can cancel the SOCK_RCU_FREE bit that udp_lib_get_port() just set, because both threads perform a read-modify-write on the same word. CPU 0 (bind) CPU 1 (SIOCGSTAMPNS_NEW) -------------------------------- ---------------------------- read sk_flags = F read sk_flags = F compute F | BIT(SOCK_RCU_FREE) compute F | BIT(SOCK_TIMESTAMP) store F | BIT(SOCK_RCU_FREE) sk_add_node_rcu(sk, ...) store F | BIT(SOCK_TIMESTAMP) After the lost update, SOCK_RCU_FREE is clear while the socket is visible to lockless UDP receive lookups. sk_destruct() then frees the socket immediately instead of waiting for a RCU grace period, while the receive path still holds a reference-less pointer to it: BUG: KASAN: slab-use-after-free in ipv4_pktinfo_prepare+0x30/0x410 Read of size 8 at addr ffff888008806610 by task exploit/207 CPU: 0 UID: 1000 PID: 207 Comm: exploit Not tainted 6.12.95+ #1 ipv4_pktinfo_prepare+0x30/0x410 udp_queue_rcv_one_skb+0x51c/0x1180 udp_unicast_rcv_skb+0x109/0x350 ip_protocol_deliver_rcu+0x14b/0x310 ip_local_deliver_finish+0x29d/0x390 ip_local_deliver+0x24d/0x2a0 Only grab the socket lock when SOCK_TIMESTAMP has to be set, to keep the common case lockless.

  19. CVE-2026-86345 9.0 Critique

    Red Hat Directory Server 11 · Red Hat Directory Server 12 · Red Hat Directory Server 13 · Red Hat Enterprise Linux 10

    A flaw was found in 389-ds-base. The server does not discard plaintext bytes already buffered from a client connection when negotiating StartTLS, allowing an on-path attacker to inject a crafted LDAP message that is processed after the TLS upgrade and whose response is delivered to the client in place of the client's own pending operation's response, due to messageID collision. This can cause a client application to treat a failed authentication (bind) attempt as successful.

  20. CVE-2026-104059 8.1 Élevée

    lektor

    Lektor 3.3.14 and 3.4.0b15 contains a cross-site request forgery vulnerability in the admin API blueprint that allows unauthenticated attackers to perform state-changing actions by sending cross-origin requests without CSRF tokens, Origin/Referer validation, CORS configuration, or Host allowlisting. Attackers can exploit the newattachment, deleterecord, build, clean, and publish endpoints from a malicious web page to write arbitrary files, delete pages, wipe build output, trigger deployment publication, and via DNS rebinding reach read endpoints to disclose data.

  21. CVE-2026-104056 9.8 Critique

    Authlib

    Authlib version 1.7.2 and below contains a vulnerability where discovery JSON metadata is cached without validation or issuer-origin binding. This allows a poisoned discovery response to replace all endpoint values with attacker-controlled values rather than endpoint URLs that share the origin of the configured server metadata URL.

  22. CVE-2026-103237 8.3 Élevée

    MISP

    MISP contains an improper input validation vulnerability in its ORM save path. When a user submits data through various endpoints (attribute add/edit, event edit, free-text import, sighting capture, shadow attribute proposal, event report creation, object reference add, user admin edit), the application sanitizes the flat record by stripping the primary key and pinning the event_id or object_id to the caller's context. However, the underlying ORM's set() method gives priority to a nested key whose name matches the model alias and discards the outer scalar fields. An authenticated user with basic write permissions can exploit this by embedding a nested block under the model alias key inside their request. The sanitization logic (id removal, event_id pinning) is applied to the outer record, but the ORM binds to the inner record instead, which carries an attacker-chosen id and event_id. This allows the attacker to overwrite, re-parent, or soft-delete rows belonging to other organizations or events they have no read access to. Impact: - Cross-tenant data integrity compromise (attribute values rewritten, objects re-parented to attacker events, rows soft-deleted) - Affects multiple entity types: Attribute, Object, EventReport, Sighting, AttributeTag, ShadowAttribute - Requires only a low-privilege authenticated account with perm_add Affected versions: <2.5.48

  23. CVE-2026-79537 9.1 Critique

    metatool-ai MetaMCP through 2.4.22 contains an insecure direct object reference (IDOR) in the MCP transport session dispatch. The session store (getSession in session-lifetime-manager.ts) is keyed only by the client-supplied mcp-session-id header with no owner, namespace, or endpoint binding, and the per-endpoint authorization middleware validates only the URL endpoint's owner, never the session. An attacker who supplies another tenant's session id " obtained without authentication from GET /metamcp/health/sessions, which discloses active session IDs and namespace UUIDs " can list and execute the victim tenant's private MCP tools and exfiltrate their data using the victim's forwarded credentials.

  24. CVE-2026-100601 5.3 Moyenne

    openclaw clawhub

    ClawHub (openclaw/clawhub) application/backend contains a server-side request forgery vulnerability in the public profile preview's image fetching. The preview accepts a user-supplied image URL and checks the textual hostname against private-address patterns, but does not validate or pin the resolved network destination, so a public-looking hostname can resolve to an internal address or change resolution between validation and connection (DNS rebinding). A maintainer-run local harness demonstrated an outbound connection to an owner-controlled loopback listener; access to production internal services, credential disclosure, and code execution were not demonstrated. The issue was confirmed at revision cbfee7343ddc867316dd9b3de6fa8856730f9f41; the complete historical affected range was not established. Fixed by PR #3683, included in revision 8c2de6c506bb4efabe3f0c2ffb8370b9e23d4650, which was deployed to clawhub.ai on 2026-09-11; self-hosted deployments should update to that revision or a later descendant. The npm CLI and OpenClaw runtime are separate products and are not affected.

  25. CVE-2026-100567 8.2 Élevée

    OpenClaw

    OpenClaw is an agent gateway distributed as the npm package 'openclaw'. In versions >= 2026.4.5 and < 2026.8.1, the Gateway validated a single DNS resolution result for a configured remote Chrome DevTools Protocol (CDP) hostname, but the raw WebSocket and Playwright transports performed a later, independent DNS resolution, discarding the DNS pinning enforced at validation time. An attacker who controls an approved CDP hostname or its DNS answers can exploit this check-then-use gap via DNS rebinding to make the Gateway connect to a loopback, private, link-local, cloud metadata, or other SSRF-policy-denied address. The impact depends on the remote CDP configuration, DNS timing, and the services reachable from the Gateway host. The issue is fixed in 2026.8.1; as a mitigation, disable hostname-based remote CDP endpoints or restrict them to trusted, stable infrastructure.

  26. CVE-2026-98017 7.8 Élevée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: net/sched: defer qdisc freeing after failed creation An RTM_NEWQDISC request can make clsact bind a populated shared ingress block during ->init(), publishing an embedded mini_Qdisc to lockless readers. If the same request has an invalid TCA_RATE, estimator setup fails after ->init(); the unwind removes the pointer but synchronously frees its containing qdisc while tc_run() may still hold it. Retire failed qdiscs through the same RCU helper as normal destruction. Inline the synchronous free into the callback now that no direct callers remain.

  27. CVE-2026-97846 6.8 Moyenne

    Red Hat Build of Keycloak · Red Hat Single Sign-On 7

    Keycloak provides a feature called mTLS holder-of-key binding which ensures that a token can only be used by the client that originally requested it by binding it to their digital certificate. A flaw was discovered where the new Standard Token Exchange V2 feature does not check for this certificate. This allows an attacker with stolen client credentials to obtain a standard, unrestricted token that bypasses these security protections.

  28. CVE-2026-92829 4.3 Moyenne

    pr-gateway Blog2Social: Social Media Auto Post & Scheduler

    The Blog2Social: Social Media Auto Post & Scheduler plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 9.1.0. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with contributor-level access and above, to view, modify, or delete other users' Blog2Social records, including disclosing another user's network authentication IDs and scheduled post content, overwriting Open Graph and Twitter Card post metadata on posts they do not own, rebinding another user's social-network authorization, and mass-hiding all users' scheduled posts sitewide. The plugin's b2s_security_nonce is emitted on the post-edit meta box, which Contributors can render, making the nonce available to any authenticated user at that role level or above.

  29. CVE-2026-77426 7.1 Élevée

    unleash

    Unleash is an open-source feature management platform. Prior to 8.0.3, the Unleash admin API contains five authorization vulnerabilities. POST /api/admin/segments/strategies assigns the Promise returned by hasPermission without awaiting it, allowing authenticated users to modify segment assignments without UPDATE_FEATURE_STRATEGY permission for the target project and environment. GET /api/admin/projects/:projectId/features/:featureName/environments/:environment/variants does not bind the requested feature to projectId, allowing cross-project variant configuration disclosure. GET .../strategies/:strategyId uses strategyId without validating the project and feature context, allowing cross-project strategy configuration disclosure. getEnvironmentInfo does not validate that the requested feature belongs to the supplied project, allowing cross-project environment information disclosure. PUT /:projectId/tags accepts feature identifiers without verifying that they belong to the URL project, allowing cross-project tag modification. This issue is fixed in version 8.0.3.

  30. CVE-2026-65980 7.9 Élevée

    chartbrew

    Chartbrew is an open-source web application that can connect directly to databases and APIs and use the data to create charts. Prior to 5.2.3, Chartbrew's ClickHouse protocol in server/sources/plugins/clickhouse/clickhouse.protocol.js calls applySqlVariables() from server/sources/shared/sql/sql.variables.js without enabling the escapeBackslash option. For a ClickHouse-backed chart with variable binding, an attacker can supply a backslash before a quote so quote doubling does not keep the value within its intended SQL string literal. Public dashboards can expose this path without authentication, and successful exploitation can execute arbitrary ClickHouse SQL to disclose data or, when the database configuration permits, access files or internal network resources. This issue is fixed in version 5.2.3.

  31. CVE-2026-76898 7.7 Élevée

    jgraph drawio

    draw.io is a configurable diagramming and whiteboarding application. Prior to version 30.3.8, src/main/java/com/mxgraph/online/Utils.java checks IPv6 Unique Local Addresses in Utils.sanitizeUrl() by comparing the text prefixes fc00:: and fd00::, but the JDK returns the expanded address form, so the fc00::/7 range, including the AWS metadata range fd00:ec2::/32, is not blocked. An unauthenticated request to /embed2.js?fetch= can therefore make src/main/java/com/mxgraph/online/EmbedServlet2.java fetch an IPv6 ULA internal resource and reflect the response to the requester. Utils.validatedAddress() uses the same private-address check for the separate ProxyServlet path, which requires ENABLE_DRAWIO_PROXY=1. The primary /embed2.js path requires no proxy feature flag or DNS rebinding, and it can disclose cloud metadata credentials or data from other IPv6-reachable internal services. This issue is fixed in version 30.3.8.

  32. CVE-2026-93202 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: i3c: master: Fix recursive locking during device registration i3c_master_register_new_i3c_devs() registers newly discovered devices while holding i3c_bus_normaluse_lock(), a down_read(). device_register() can immediately probe the device, and probe callbacks typically invoke I3C helpers that take i3c_bus_normaluse_lock() again, leading to a recursive acquisition of the same rwsem. rwsems do not support recursive read locking and can deadlock when a writer is waiting. See the "Recursive read locks" section of Documentation/locking/lockdep-design.rst. For example, with Intel LPSS I3C, LOCKDEP generates a WARNING like: # echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/unbind # echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/bind WARNING: possible recursive locking detected kworker/5:1/94 is trying to acquire lock: ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_device_match_id+0x45/0x370 but task is already holding lock: ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_master_reg_work_fn+0x21/0x5f0 Fix this by separating device creation from device registration. Populate desc->dev under the maintenance lock, collect the devices that still need registration into a local list, then release the lock before calling device_register(). Finally retake the lock and clean up any devices that failed to register. Use the maintenance lock rather than the normal-use lock while adding device objects. A write-side maintenance lock prevents readers from observing a partially initialized desc->dev during initial device population, or desc->dev disappearing if registration fails. The local list requires a list node, so add a list node member to struct i3c_device.

  33. CVE-2026-90169 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: free preauth sessions on connection teardown SMB3.1.1 multichannel binding preserves the preauthentication hash in a preauth_session between the NTLM negotiate and authenticate requests. The binding NTLM negotiate allocates this object and returns STATUS_MORE_PROCESSING_REQUIRED. If the client disconnects before it sends the authenticate request, neither the authenticate nor error cleanup paths free the object. Release any remaining preauthentication sessions when tearing down the connection. Initialize the list when allocating the connection so that this cleanup is safe regardless of the negotiated dialect.

  34. CVE-2026-42784 7.4 Élevée

    Red Hat Ansible Automation Platform 2.6 for RHEL 9 · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 9 · Red Hat Cost Management On-Premise 1

    A flaw was found in sequoia-openpgp. The library incorrectly infers key flags for older certificates when a key flags subpacket is missing, leading to a discrepancy in how key capabilities are viewed. This key flag confusion allows an attacker to bypass the back-signature check. Consequently, an attacker can illegitimately bind an arbitrary subkey to their own certificate and forge signatures, completely compromising cryptographic integrity.

  35. CVE-2026-80274 7.5 Élevée

    ISC BIND 9

    If a BIND resolver sends a query for a DNSSEC-signed authoritative zone, and the authoritative server replies with a valid wildcard answer and signed NSEC3 proof, followed by an unsigned NSEC at the same owner name, it will trigger an unexpected program exit. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

  36. CVE-2026-77119 5.9 Moyenne

    ISC BIND 9

    A validly signed NSEC3 from an unrelated sibling zone may be accepted as an insecurity proof, downgrading a secure delegation and letting a forged unsigned answer through. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

  37. CVE-2026-76163 7.5 Élevée

    ISC BIND 9

    If BIND is loaded with a "`named.conf`" file that contains no global "`options`" block, an attacker can send a query of QTYPE TKEY which may cause an assertion failure and subsequent unexpected program exit. This issue affects BIND 9 versions 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, and 9.20.9-S1 through 9.20.27-S1.

  38. CVE-2026-75029 5.3 Moyenne

    ISC BIND 9

    In a query response, an attacker may send `named` multiple copies of a record that should only exist once (such as an SOA record). If the RDATA is the same on all the copies, the record is appended to the in-memory RDATA set, which can cause increased memory usage of the negative cache and possibly lead to other memory attack vectors. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

  39. CVE-2026-19668 5.3 Moyenne

    ISC BIND 9

    A BIND recursive resolver may experience excessive resource consumption if it encounters large numbers of a particular kind of invalid DNSSEC record. Default limits on "max-records-per-type" and "max-types-per-name" help mitigate the exposure. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

  40. CVE-2026-19666 7.5 Élevée

    ISC BIND 9

    On a resolver configured to use ``dns64``, if an applicable answer from the authoritative server is malformed in a specific way, the resolver `named` process will exit unexpectedly. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

  41. CVE-2026-19033 6.5 Moyenne

    ISC BIND 9

    For a secondary zone with transfers restricted by TSIG, `named` may start to serve the data provided in a zone transfer before the final message with the TSIG signature arrives. This could allow an attacker that does not actually possess a valid TSIG signature to send unauthorized zone contents to a secondary server. Although no TSIG signature ever arrives, `named` does not rollback to the pre-transfer state. To exploit the vulnerability, the transfer must be a multi-message TCP IXFR, as described by RFC 8945. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

  42. CVE-2026-81736 7.5 Élevée

    ISC BIND 9

    If a BIND resolver has cached a tree of SVCB/HTTPS AliasMode records, and is then queried for the root of that tree, the resolver will spend disproportionate CPU time constructing the response. This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.18.11-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

  43. CVE-2026-81563 7.5 Élevée

    ISC BIND 9

    A BIND resolver encountering an SVCB/HTTPS AliasMode record referencing 14 or more SVCB/HTTPS ServiceMode records may fail to properly deallocate internal resources. If this happens repeatedly, resource exhaustion will eventually prevent the resolver from performing new recursive lookups. This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.18.11-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

  44. CVE-2026-78301 5.8 Moyenne

    ISC BIND 9

    A malformed zone may contain an NS or DNAME node above its origin, which `named` treats as a zone cut. If an attacker inserts a malformed zone into a BIND authoritative server (e.g., via zone transfer), queries for names inside the configured zone then lose authoritative status and return an out-of-zone delegation. On a server that also provides recursion BIND can follow this locally sourced cut and cache attacker-supplied data, affecting names outside the configured zone. This situation persists as long as the malformed zone remains in the zone database. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

  45. CVE-2026-77692 7.5 Élevée

    ISC BIND 9

    An attacker can cause `named` to abort by sending a crafted DNS-over-HTTPS request with a cryptographically invalid SIG(0) record, and then closing the transport connection prematurely. This issue affects BIND 9 versions 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, and 9.20.9-S1 through 9.20.27-S1.

  46. CVE-2026-19941 5.9 Moyenne

    ISC BIND 9

    An inapplicable NSEC record may be accepted by a `named` resolver as proof that no wildcard exists, which could allow an attacker at the same or an upstream level of the zone name to mask the existence of a victim's wildcard record. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

  47. CVE-2026-19667 7.5 Élevée

    ISC BIND 9

    If an attacker-controlled authoritative server can produce a negative answer that is exactly 65536 bytes, then a flaw in `named` results in a negative cache entry of 0 bytes. When this entry is subsequently read, `named` aborts. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

  48. CVE-2026-19662 5.9 Moyenne

    ISC BIND 9

    An attacker may be able to cause a `named` resolver to abort. The attack requires inducing the victim resolver to send multiple queries for a DNSSEC-signed zone hosted by an authoritative server under the control of the attacker. If the auth responds with a particular sequence of crafted answers, and those answers arrive in a particular order with particular timing, the `named` resolver will encounter a use-after-free bug, and abort. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1.

  49. CVE-2026-59971 10.0 Critique

    designcomputer mysql_mcp_server

    MySQL MCP Server is a Model Context Protocol server that enables secure interaction with MySQL databases. Prior to 0.4.2, setting MCP_TRANSPORT=sse causes src/mysql_mcp_server/server.py to construct SseServerTransport without security_settings or enable_dns_rebinding_protection, while the Starlette routes /, /sse, and /messages/ have no authentication and the service binds to 0.0.0.0 by default. A network attacker can directly reach execute_sql, or can use DNS rebinding to make a victim's browser relay same-origin requests to a locally bound service, and supply a query that reaches cursor.execute(query). This allows unauthenticated disclosure and modification of the configured database; when the MySQL account has FILE privileges, the same access can read or write server files and may enable code execution. The default stdio transport is not affected. This issue is fixed in 0.4.2.

  50. CVE-2026-57139 9.8 Critique

    MervinPraison PraisonAI

    PraisonAI is a multi-agent teams system. From 1.5.0 until 1.7.2, MCPServer.startHttp() in src/praisonai-ts/src/mcp/server.ts binds without a host restriction and forwards every HTTP POST request to handleRequest() without authentication or authorization. Any network client that can reach the port can call tools/list, tools/call, resources/read, or prompts/get, causing registered handlers to run with server-side credentials and process privileges or disclose registered data. An initial remediation was released in version 1.7.2.

  51. CVE-2026-55846 6.2 Moyenne

    allure-framework allure2

    Allure 2 is the version 2.x branch of Allure Report, a multi-language test reporting tool. Prior to 2.39.0, the HTTP server started by allure serve and allure open uses URI.getPath() in Commands.setUpServer() in allure-commandline/src/main/java/io/qameta/allure/Commands.java and passes the percent-decoded request path to reportDirectory.resolve() without normalizing the result or confirming that it remains inside that directory. An unauthenticated client that can reach the server can submit parent-directory segments, including percent-encoded segments, and cause serveFile() to return any regular file readable by the Allure process. The server binds to localhost by default, but the --host option can expose it to other systems, and local users, adjacent containers, or browser-origin attacks may reach a local listener. This can disclose credentials, configuration, source code, build secrets, and other CI/CD data. This issue is fixed in version 2.39.0.

  52. CVE-2026-53708 6.6 Moyenne

    IBM mcp-context-forge · IBM mcp-contextforge-gateway

    ContextForge is an AI gateway, registry, and proxy that provides centralized discovery, guardrails, and management for MCP, A2A, and REST or gRPC APIs. Prior to 1.0.3, the /admin/gateways/test call site in mcpgateway/admin.py calls validate_gateway_test_url() in mcpgateway/common/validators.py to resolve and reject private, loopback, link-local, and cloud-metadata addresses, but ResilientHttpClient later resolves the original hostname again without binding the validated address. When MCPGATEWAY_ADMIN_API_ENABLED is enabled, an attacker with a database-backed role containing explicit gateways.read permission can use DNS rebinding to return a public address during validation and a private or metadata address during connection, bypassing ssrf_blocked_networks and ssrf_dns_fail_closed because those controls apply only to the validation-time result. The endpoint's allow_admin_bypass=False setting means a bootstrap-only virtual platform-admin identity without a database role is not sufficient. Successful exploitation can reach internal services and cloud metadata, expose cloud credentials, access internal APIs, or probe internal network ports. This issue is fixed in version 1.0.3.

  53. CVE-2026-90678 7.5 Élevée

    HAProxy

    An issue was discovered in HAProxy 3.3.0 through 3.4.4 and in 3.5-dev1 through 3.5-dev5. Exploitation requires an HTTP/3 frontend: HAProxy must be built with QUIC support and configured with a QUIC bind listener, and the affected traffic must reach a backend over HTTP/1.1 using chunked transfer coding on a reused connection. Under those conditions, when an HTTP/3 request carries no Content-Length header, the HTTP/3 multiplexer credits the length declared in a DATA frame header to the stream endpoint's known-input-payload estimate at the moment the frame header is decoded, before the payload has been received, and that declared length is emitted verbatim as the HTTP/1.1 chunk size. A remote unauthenticated client that declares more payload than it delivers and then ends the stream causes HAProxy to announce a chunk larger than the bytes it writes and to return the connection to the idle pool in a desynchronized state. The result is potential HTTP request smuggling on reused backend connections: an attacker can place a request past a frontend rule such as a path-based http-request deny, so that the smuggled request is never seen by HAProxy's HTTP analysis, and can cause concurrent clients' requests, including their request lines and Authorization headers, to be consumed as the attacker's request body and lost. Exploitation is not deterministic; it depends on a race with backend connection pooling, succeeding in a majority of but not all trials during testing, and can be retried freely. The mechanism was introduced in 3.3-dev10; releases 3.2.x and earlier are unaffected.

  54. CVE-2026-89635 9.8 Critique

    Linux

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: only rebind the reopened file's own oplock on durable reconnect ksmbd_reopen_durable_fd() walks the inode's m_op_list and rebinds every detached oplock to the reconnecting session: list_for_each_entry_rcu(op, &ci->m_op_list, op_entry, lockdep_is_held(&ci->m_lock)) { if (op->conn) continue; op->conn = ksmbd_conn_get(fp->conn); op->sess = work->sess; } The only key is op->conn == NULL, which every detached durable handle on that inode matches, not just the one owned by fp. When two sessions hold durable handles on the same file and both disconnect, reconnecting one of them adopts the other session's oplock: op->sess is overwritten with the reconnecting session without taking a reference on it, while op->conn pins the connection. The sibling teardown path, session_fd_check(), keys on the identity of the connection being torn down (op->conn == conn) rather than on shared state, and so does not have this problem. Once the adopting session is destroyed, ksmbd_session_destroy() frees it while the foreign oplock still points at it. The reader in ksmbd_close_fd_app_instance_id() validates only opinfo->conn, which is still live thanks to the reference taken above, and then dereferences the stale session: if (!opinfo->conn) { up_read(&fp->f_ci->m_lock); goto out; } ft = &opinfo->sess->file_table; write_lock(&ft->lock); BUG: KASAN: slab-use-after-free in _raw_write_lock+0x74/0xd0 Write of size 4 at addr ffff88810a970528 by task kworker/0:0/9 Workqueue: ksmbd-io handle_ksmbd_work Call Trace: _raw_write_lock+0x74/0xd0 ksmbd_close_fd_app_instance_id+0x183/0x410 smb2_open+0x1346/0x4430 handle_ksmbd_work+0x2bb/0x7b0 Reached from an authenticated session against a share with the default durable-handle and oplock configuration: two sessions open the same file with a durable-v2 handle and an RH lease under distinct AppInstanceIds, both log off, one reconnects with DH2C, and a later durable-v2 create carrying the other AppInstanceId walks into the freed session. Constrain the loop to the oplock owned by the file being reopened.

  55. CVE-2026-89625 – Non évaluée

    Linux

    In the Linux kernel, the following vulnerability has been resolved: HID: sony: fix UAF of ghl_poke_timer / ghl_urb at driver unbind For GHL (Guitar Hero Live) dongles, sony_probe() arms a periodic timer: ghl_magic_poke() (the timer callback) submits sc->ghl_urb, and the URB completion ghl_magic_poke_cb() re-arms the timer with mod_timer(). sony_remove() drained the timer with timer_delete_sync() and then freed the URB with usb_free_urb(): timer_delete_sync(&sc->ghl_poke_timer); usb_free_urb(sc->ghl_urb); timer_delete_sync() does not block re-arming, and while the URB is in flight the timer is not pending, so the sync delete is a no-op. A URB completion that runs after the delete re-arms the timer, and usb_free_urb() only drops a reference -- it does not kill an in-flight URB. sc is allocated with devm_kzalloc() and freed once sony_remove() returns, so the re-armed ghl_poke_timer (embedded in sc) then fires on freed memory, a use-after-free from timer softirq. This is a disconnect/rmmod race. Poison the URB first, then shut the timer down, before freeing the URB. usb_poison_urb() kills any in-flight URB and permanently rejects further submissions, so a poke timer that is still pending cannot re-submit the URB from ghl_magic_poke() in the window before timer_shutdown_sync() runs. usb_kill_urb() would not suffice: it only cancels the in-flight URB and leaves it submittable once it returns, so the pending timer could re-submit it and put a fresh URB in flight over the freed sc. timer_shutdown_sync() then drains any last callback and blocks re-arming. The probe error path is unaffected: it is only reached before the timer is armed. Reproduced under KASAN on next-20260710 via dummy_hcd + raw-gadget emulation of the GHL PS4 dongle (VID 0x1430 / PID 0x07bb): hid-sony binds and arms the poke timer, the poke URB is held in flight, the driver is unbound (freeing sc), then the URB is released. The completion re-arms the timer on the freed sc, and the re-armed timer fires ~8 s later: BUG: KASAN: slab-use-after-free in ghl_magic_poke+0x98/0xb0 Read of size 8 at addr ffff88810b02fd50 by task swapper/0/0 ghl_magic_poke+0x98/0xb0 call_timer_fn+0x35/0x2b0 __run_timers+0x69c/0x9a0 run_timer_softirq+0x173/0x2a0 Allocated by task 169: sony_probe Freed by task 338: devres_release_group <- hid_device_remove (sony_remove) Found by 0sec (https://0sec.ai) using automated source analysis.

  56. CVE-2026-45321 9.6 Critique Exploitée Rançongiciel

    @tanstack arktype-adapter · @tanstack eslint-plugin-router · @tanstack eslint-plugin-start · @tanstack history

    On 2026-05-11, between approximately 19:20 and 19:26 UTC, 84 malicious versions across 42 @tanstack/* packages were published to the npm registry. The publishes were authenticated via the legitimate GitHub Actions OIDC trusted-publisher binding for TanStack/router, but the publish workflow itself was not modified. The attacker chained three known vulnerability classes — a pull_request_target "Pwn Request" misconfiguration, GitHub Actions cache poisoning across the fork↔base trust boundary, and runtime memory extraction of the OIDC token from the Actions runner process — to publish credential-stealing malware under a trusted identity. Each affected package received exactly two malicious versions, published a few minutes apart.

  57. CVE-2015-5477 7.5 Élevée Exploitée

    Juniper junos · Fedoraproject fedora · Redhat enterprise linux · Redhat enterprise linux aus

    named in ISC BIND 9.x before 9.9.7-P2 and 9.10.x before 9.10.2-P3 allows remote attackers to cause a denial of service (REQUIRE assertion failure and daemon exit) via TKEY queries.