Samedi 25 juillet 2026

Linux

In the Linux kernel, the following vulnerability has been resolved: crypto: qat - remove unused character device and IOCTLs The QAT driver exposes a character device (qat_adf_ctl) with IOCTLs for device configuration, start, stop, status query and enumeration. These IOCTLs are not part of any public uAPI header and have no known in-tree or out-of-tree users. Device lifecycle is already managed via sysfs. The ioctl interface also increases the attack surface and is the subject of a number of bug reports. Remove the character device, the IOCTL definitions, and the related data structures (adf_dev_status_info, adf_user_cfg_key_val, adf_user_cfg_section, adf_user_cfg_ctl_data). Drop the now-unused adf_cfg_user.h header and strip adf_ctl_drv.c down to the minimal module_init/module_exit hooks for workqueue, AER, and crypto/compression algorithm registration. Clean up leftover dead code that was only reachable from the removed IOCTL paths: adf_cfg_del_all(), adf_devmgr_verify_id(), adf_devmgr_get_num_dev(), adf_devmgr_get_dev_by_id(), adf_get_vf_real_id() and the unused ADF_CFG macros. Additionally, drop the entry associated to QAT IOCTLs in ioctl-number.rst.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/hyperv: validate resolution_count and fix WIN8 fallback A SYNTHVID_RESOLUTION_RESPONSE with resolution_count > 64 walks past the supported_resolution[SYNTHVID_MAX_RESOLUTION_COUNT] array in the parse loop. Bound resolution_count against the array size, folded into the existing zero-check. When the WIN10 resolution probe fails, the caller in hyperv_connect_vsp() left hv->screen_*_max / preferred_* unpopulated, which sets mode_config.max_width / max_height to 0 and makes drm_internal_framebuffer_create() reject every userspace framebuffer with -EINVAL. The pre-WIN10 branch had the same gap for preferred_width / preferred_height. Use a single post-probe fallback guarded by screen_width_max == 0 so both paths converge on the WIN8 defaults.

Linux

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix eswitch mode block underflow on IPsec acquire SA mlx5e_xfrm_add_state() handles acquire-flow temporary SAs by allocating software state and skipping hardware offload setup. That path jumps to the common success label before taking the eswitch mode block. After tunnel-mode validation was moved earlier, the common success label unconditionally calls mlx5_eswitch_unblock_mode(). For acquire SAs, this decrements esw->offloads.num_block_mode without a matching increment. Return directly after installing the acquire SA offload handle, so only the paths that successfully called mlx5_eswitch_block_mode() call the matching unblock.

Linux

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Bound PARTITION_INFO_GET_REGS copies The register-based PARTITION_INFO_GET path trusted the firmware-provided indices when copying partition descriptors into the caller buffer. Reject inconsistent counts or index progressions so the copy loop cannot write past the allocated array. (fixed cur_idx when exactly one descriptor in the first fragment)

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vce1: Fix VCE 1 firmware size and offsets The VCPU BO contains the actual FW at an offset, but it was not calculated into the VCPU BO size. Subtract this from the FW size to make sure there is no out of bounds access. Make sure the stack and data offsets are aligned to the 32K TLB size. Check that the FW microcode actually fits in the space that is reserved for it. (cherry picked from commit c16fe59f622a080fc457a57b3e8f14c780699449)

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix MLE defragmentation If either reconf or EPCS multi-link element (MLE) is contained in a non-transmitted profile, the defragmentation routine is called with a pointer to the defragmented copy, but the original elements. This is incorrect for two reasons: - if the original defragmentation was needed, it will not find the correct data - if the original frame is at a higher address, the parsing will potentially overrun the heap data (though given the layout of the buffers, only into the new defragmentation buffer, and then it has to stop and fail once that's filled with copied data. Fix it by tracking the container along with the pointer and in doing so also unify the two almost identical defragmentation routines.

Linux

In the Linux kernel, the following vulnerability has been resolved: ACPI: NFIT: core: Fix acpi_nfit_init() error cleanup If acpi_nfit_init() fails after adding the acpi_desc object to the acpi_descs list, that object is never removed from that list because the acpi_nfit_shutdown() devm action is not added for the NFIT device in that case. Next, the acpi_nfit_init() failure causes acpi_nfit_probe() to fail, the acpi_desc object is freed, and a dangling pointer is left behind in the acpi_descs. Any subsequent ACPI Machine Check Exception will trigger nfit_handle_mce() which iterates over acpi_descs and so a use-after-free will occur. Moreover, if acpi_nfit_probe() returns 0 after installing a notify handler for the NFIT device and without allocating the acpi_desc object and setting the NFIT device's driver data pointer, the acpi_desc object will be allocated by acpi_nfit_update_notify() and acpi_nfit_init() will be called to initialize it. Regardless of whether or not acpi_nfit_init() fails in that case, the acpi_nfit_shutdown() devm action is not added for the NFIT device and acpi_desc is never removed from the acpi_descs list. If the acpi_desc object is freed subsequently on driver removal, any subsequent ACPI MCE will lead to a use-after-free like in the previous case. To address the first issue mentioned above, make acpi_nfit_probe() call acpi_nfit_shutdown() directly on acpi_nfit_init() failures and to address the other one, add a remove callback to the driver and make it call acpi_nfit_shutdown(). Also, since it is now possible to pass NULL to acpi_nfit_shutdown() or the acpi_desc object passed to it may not have been initialized, add checks against NULL for acpi_desc and its nvdimm_bus field to that function and make acpi_nfit_unregister() clear the latter after unregistering the NVDIMM bus.

Linux

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad_sigma_delta: fix clear_pending_event for registerless devices ad_sigma_delta_clear_pending_event() falls through to the status register read path for devices with has_registers = false and no rdy_gpiod. For such devices, ad_sd_read_reg() skips the address byte entirely and clocks raw MISO bytes with no address phase — making it byte-for-byte identical to reading conversion data. If a pending conversion result is present, this partially consumes it and corrupts the data stream for the subsequent ad_sd_read_reg() call in ad_sigma_delta_single_conversion(). Furthermore, with num_resetclks = 0 on these devices, data_read_len evaluates to 0. If the clocked byte has bit 7 clear, pending_event is set and the code attempts memset(data + 2, 0xff, 0 - 1), overflowing to SIZE_MAX and corrupting the heap. Fix by returning 0 immediately when neither rdy_gpiod nor has_registers is set. This is safe for all current registerless devices: ad7191 and ad7780 (with powerdown GPIO) are reset between conversions by CS deassertion, so there is no stale result to drain; ad7780 (without powerdown GPIO) and max11205 are continuously-converting and cycle ~DRDY at the output data rate regardless of whether the previous result was read, so the next falling edge fires naturally. A future registerless device that holds ~DRDY asserted until data is read would be broken by this early return and would require either num_resetclks set or a rdy-gpio. The same heap corruption is reachable on any device with rdy_gpiod set but num_resetclks = 0: if the GPIO indicates a pending event, the drain path executes memset(data + 2, 0xff, 0 - 1) regardless of has_registers. Add an explicit data_read_len == 0 guard after the pending event check; the stale result is then consumed by the first ad_sd_read_reg() call in ad_sigma_delta_single_conversion().

Linux

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad_sigma_delta: fix CS held asserted and state leaks In ad_sigma_delta_single_conversion(), set_mode(AD_SD_MODE_IDLE) and disable_one() were called from the out: block while keep_cs_asserted was still true. This caused any SPI transfer issued by those callbacks to carry cs_change=1, leaving CS permanently asserted after the conversion. Fix by moving both calls into the out_unlock: block, after keep_cs_asserted is cleared, matching the pattern already used in ad_sd_calibrate(). In the error path of ad_sd_buffer_postenable(), if an operation fails after set_mode(AD_SD_MODE_CONTINUOUS) has already succeeded (e.g. spi_offload_trigger_enable()), the device is left in continuous conversion mode with CS physically asserted. Additionally, bus_locked remaining true after spi_bus_unlock() causes subsequent SPI operations to call spi_sync_locked() without the bus lock actually held, allowing concurrent SPI access. Fix the error path by clearing keep_cs_asserted first, then calling set_mode(AD_SD_MODE_IDLE) to revert the device mode and deassert CS, then clearing bus_locked before releasing the bus. For devices that implement neither set_mode nor disable_one (such as MAX11205, which has no physical CS pin), no SPI transfer is issued during cleanup and the cs_change flag has no effect on any physical line.

Linux

In the Linux kernel, the following vulnerability has been resolved: iio: event: Fix event FIFO reset race `iio_event_getfd()` creates the event file descriptor with `anon_inode_getfd()`, which allocates a new fd, creates the anonymous file and installs it in the process fd table before returning to the caller. The IIO code resets the event FIFO after `anon_inode_getfd()` has returned, but before `IIO_GET_EVENT_FD_IOCTL` has copied the fd number to userspace. But since fd tables are shared between threads, another thread can guess the newly allocated fd number and issue a `read()` on it as soon as the fd has been installed. This means the `kfifo_to_user()` in `iio_event_chrdev_read()` can run in parallel with the `kfifo_reset_out()` in `iio_event_getfd()`. The kfifo documentation says that `kfifo_reset_out()` is only safe when it is called from the reader thread and there is only one concurrent reader. Otherwise it is dangerous and must be handled in the same way as `kfifo_reset()`. If that happens, `kfifo_to_user()` can advance the FIFO `out` index based on state from before the reset, after the reset has already moved the `out` index to the current `in` index. That can leave the FIFO with an `out` index past the `in` index. A later `read()` can then see an underflowed FIFO length and copy more data than the event FIFO buffer contains. This can result in an out-of-bounds read and leak adjacent kernel memory to userspace. Move the FIFO reset before `anon_inode_getfd()`. At that point the event fd is marked busy, but the new fd has not been installed yet, so userspace cannot access it while the FIFO is reset.

Linux

In the Linux kernel, the following vulnerability has been resolved: ALSA: virtio: Validate control metadata from the device virtio-snd control handling trusts the device-provided control type and value count returned by the device. That metadata is then used directly to index g_v2a_type_map[] in virtsnd_kctl_info(), and to size loops and memcpy() operations in virtsnd_kctl_get() and virtsnd_kctl_put() against fixed-size virtio_snd_ctl_value and snd_ctl_elem_value arrays. A buggy or malicious device can therefore trigger out-of-bounds access by advertising an invalid control type or an oversized value count. Validate control type and count once in virtsnd_kctl_parse_cfg(), before querying enumerated items or exposing the control to ALSA.

Linux

In the Linux kernel, the following vulnerability has been resolved: ALSA: compress: Fix task creation error unwind snd_compr_task_new() allocates the driver task before validating the returned DMA buffers and reserving file descriptors. When either of those later steps fails, the core frees its task wrapper and DMA-buffer references without calling the driver's task_free() callback. Any driver resources allocated by task_create() are therefore leaked. The dual-fd allocation path also jumps to cleanup without storing the negative get_unused_fd_flags() result in retval. Since retval still contains the successful task_create() return value, TASK_CREATE can incorrectly report success although the task was discarded. Preserve the fd allocation errors and call task_free() when failure occurs after a successful task_create() callback.

Linux

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/cs35l41: Fix firmware load work teardown cs35l41_hda creates ALSA controls whose private data points at the cs35l41_hda object. The firmware load control can also queue fw_load_work. Those controls are not removed on component unbind, and device remove only cancels fw_load_work through cs35l41_remove_dsp(). That helper is skipped when halo_initialized is false. With firmware_autostart disabled, a firmware load can be requested before the DSP has been initialized. If the component or device is removed before the queued work runs, the worker can run after teardown and dereference driver state that is no longer valid. Track the created controls and remove them on unbind so no new control callback can reach the driver data or queue more work. Then cancel fw_load_work to drain any request that was already queued. Also cancel the work unconditionally during device remove before runtime PM teardown.

Linux

In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Release the VGA arbiter client on register_device() failure The re-order in the Fixes commit below displaced vfio_pci_vga_init() as the last failure point of what is now vfio_pci_core_register_device() without introducing an unwind for the VGA arbiter registration. In current kernels this is mostly benign because vfio_pci_set_decode() only uses pci_dev state, but the original failure path could leave a callback with a freed vdev cookie. The stale registration also becomes unsafe again once the callback follows drvdata to the vfio device. Add the required VGA unwind callout.

Linux

In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF in binder_thread_release() When a thread exits, binder_thread_release() walks its transaction stack to clear the t->from and t->to_proc that correspond with the exiting thread. However, a process dying in parallel might attempt to kfree some of these transactions. And if one of them has no associated t->to_proc, the t->to_proc->inner_lock will not be acquired. This means that transaction accesses in binder_thread_release() after t->to_proc has been cleared might race with binder_free_transaction() and cause a use-after-free error as reported by KASAN: ================================================================== BUG: KASAN: slab-use-after-free in binder_thread_release+0x5d0/0x798 Write of size 8 at addr ffff000016627500 by task X/715 CPU: 17 UID: 0 PID: 715 Comm: X Not tainted 7.1.0-rc5-00149-g8fde5d1d47f6 #30 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: binder_thread_release+0x5d0/0x798 binder_ioctl+0x12c0/0x299c [...] Allocated by task 717 on cpu 18 at 67.267803s: __kasan_kmalloc+0xa0/0xbc __kmalloc_cache_noprof+0x174/0x444 binder_transaction+0x554/0x8150 binder_thread_write+0xa30/0x4354 binder_ioctl+0x20f0/0x299c [...] Freed by task 202 on cpu 18 at 90.416221s: __kasan_slab_free+0x58/0x80 kfree+0x1a0/0x4a4 binder_free_transaction+0x150/0x294 binder_send_failed_reply+0x398/0x6d8 binder_release_work+0x3e4/0x4ec binder_deferred_func+0xbd8/0x104c [...] ================================================================== In order to avoid this, make sure that binder_free_transaction() reads the t->to_proc under the transaction lock. This will serialize the transaction release with the accesses in binder_thread_release(). Plus, it matches the documented locking rules for @to_proc.

Linux

In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF in binder_free_transaction() In binder_free_transaction(), the t->to_proc is read under the t->lock. However, once the t->lock is dropped, the to_proc can die in parallel. This leads to a use-after-free error when we attempt to acquire its inner lock right afterwards: ================================================================== BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x1a0 Write of size 4 at addr ffff00001125da70 by task B/672 CPU: 20 UID: 0 PID: 672 Comm: B Not tainted 7.1.0-rc6-00284-g8e65320d91cd #4 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: _raw_spin_lock+0xe4/0x1a0 binder_free_transaction+0x8c/0x320 binder_send_failed_reply+0x21c/0x2f8 binder_thread_release+0x488/0x7e0 binder_ioctl+0x12c0/0x29a0 [...] Allocated by task 675: __kmalloc_cache_noprof+0x174/0x444 binder_open+0x118/0xb70 do_dentry_open+0x374/0x1040 vfs_open+0x58/0x3bc [...] Freed by task 212: __kasan_slab_free+0x58/0x80 kfree+0x1a0/0x4a4 binder_proc_dec_tmpref+0x32c/0x5e0 binder_deferred_func+0xc48/0x104c process_one_work+0x53c/0xbc0 [...] ================================================================== To prevent this, pin the target thread (t->to_thread) to guarantee the target process remains alive. Undelivered transactions without a target thread are already safe, as the target process can only be the current context in those paths.

Linux

In the Linux kernel, the following vulnerability has been resolved: rust_binder: use a u64 stride when cleaning up the offsets array Allocation's Drop walks the offsets array (binder_size_t = u64 entries), cleaning up the objects, but it used usize instead of u64 for both the stride and the per-entry read. On 64-bit kernels (usize == u64) this is harmless, but on 32-bit kernels it walks the 8-byte entries in 4-byte steps, iterating an N-entry array 2N times, and reads the always-zero high word as offset 0, cleaning up the object at offset 0 N extra times. As a result the referenced node or handle ends up with a lower reference count than it actually has (a refcount over-decrement), and binder's reference accounting is corrupted; for example, the owner can be notified of a strong reference release (BR_RELEASE) even though references still remain. Change the stride to u64, and read each entry as a u64, narrowing it to usize with try_into(). On 32-bit ARM, when this over-decrement would drive a count below zero, the driver's existing refcount guard refuses it and fires: rust_binder: Failure: refcount underflow!

Linux

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpci_rt1711h: unregister TCPCI port with devres rt1711h_probe() registers the TCPCI port before requesting the interrupt and enabling alert interrupts. If either of those later steps fails, the probe function returns without unregistering the TCPCI port. The explicit unregister currently only happens from the remove callback. Register a devres action immediately after tcpci_register_port() succeeds, so tcpci_unregister_port() runs on later probe failures and on driver detach. Drop the remove callback to avoid unregistering the same port twice. This issue was identified during our ongoing static-analysis research while reviewing kernel code.

Linux

In the Linux kernel, the following vulnerability has been resolved: PCI/IOV: Skip VF Resizable BAR restore on read error sriov_restore_vf_rebar_state() uses the VF Resizable BAR Control register to decide how many VF BARs to restore (nbars) and which VF BAR each iteration addresses (bar_idx). bar_idx indexes into dev->sriov->barsz[], which has only PCI_SRIOV_NUM_BARS (6) entries. When a device does not respond, config reads typically return PCI_ERROR_RESPONSE (~0). Both fields are 3 bits wide, so nbars and bar_idx both evaluate to 7. The barsz[] access then goes out of bounds. UBSAN reports this as: UBSAN: array-index-out-of-bounds in drivers/pci/iov.c:948:51 index 7 is out of range for type 'resource_size_t [6]' Observed on an NVIDIA RTX PRO 1000 GPU (GB207GLM) that stopped responding during a failed GC6 power state exit. The subsequent pci_restore_state() invoked sriov_restore_vf_rebar_state() while config reads returned 0xffffffff, triggering the splat. Bail out if any VF Resizable BAR Control read returns PCI_ERROR_RESPONSE. No further VF BARs are touched, which is safe because a config read that returns PCI_ERROR_RESPONSE indicates the device is unreachable and restoration is pointless. This mirrors the guard in pci_restore_rebar_state().

Linux

In the Linux kernel, the following vulnerability has been resolved: hwrng: virtio: clamp device-reported used.len at copy_data() random_recv_done() stores the device-reported used.len directly into vi->data_avail. copy_data() then indexes vi->data[] using vi->data_idx (advanced by previous copy_data() calls) and issues a memcpy() without re-validating either value against the posted buffer size sizeof(vi->data) (SMP_CACHE_BYTES bytes, typically 32 or 64). A malicious or buggy virtio-rng backend can set used.len beyond sizeof(vi->data), steering the memcpy() past the end of the inline array into adjacent kmalloc-1k slab bytes. hwrng_fillfn() mixes those bytes into the guest RNG, and guest root can also observe them directly via /dev/hwrng. Concrete impact is inside the guest: - Memory-safety / hardening: any virtio-rng backend that over-reports used.len causes the driver to read past vi->data into unrelated slab contents. hwrng_fillfn() is a kernel thread that runs as soon as the device is probed; no guest userspace interaction is required to first-trigger the OOB. - Cross-boundary leak (confidential-compute threat model): a malicious hypervisor cooperating with a malicious or compromised guest root userspace can use /dev/hwrng as a leak channel for guest-kernel heap data. The host sets a large used.len, guest root reads /dev/hwrng, and the returned bytes contain guest kernel slab contents that were adjacent to vi->data. In practice, confidential-compute guests (SEV-SNP, TDX) usually disable virtio-rng entirely, so this path is narrow, but the fix is still worth carrying because the underlying memory-safety bug contaminates the guest RNG on any host. KASAN confirms the OOB on a 7.1-rc4 guest whose virtio-rng backend has been patched to report used.len = 0x10000: BUG: KASAN: slab-out-of-bounds in virtio_read+0x394/0x5d0 Read of size 64 at addr ffff88800ae0ba20 by task hwrng/52 Call Trace: __asan_memcpy+0x23/0x60 virtio_read+0x394/0x5d0 hwrng_fillfn+0xb2/0x470 kthread+0x2cc/0x3a0 Allocated by task 1: probe_common+0xa5/0x660 virtio_dev_probe+0x549/0xbc0 The buggy address belongs to the object at ffff88800ae0b800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 0 bytes to the right of allocated 544-byte region [ffff88800ae0b800, ffff88800ae0ba20) Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer overflow in USB transport layer"), which hardened usb9pfs_rx_complete() against unchecked device-reported length in the USB 9p transport. With the clamp at point of use and array_index_nospec() in place, the same harness boots cleanly: copy_data() returns zero for the bogus report, the device-supplied bytes after data_idx are discarded, and the driver issues a fresh request.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: fix disconnect UAF in client teardown usbio_disconnect() walks usbio->cli_list in reverse and uninitializes each auxiliary device. auxiliary_device_uninit() drops the device reference, and for an unbound child that can run usbio_auxdev_release() and free the containing struct usbio_client. list_for_each_entry_reverse() advances after the loop body by reading client->link.prev. If the current client is freed by auxiliary_device_uninit(), the iterator dereferences freed memory. Use list_for_each_entry_safe_reverse() so the previous client is cached before the body can drop the final reference. This preserves reverse teardown order while keeping the next iterator cursor independent of the current client's lifetime. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in usbio_disconnect+0x12e/0x150 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? usbio_disconnect+0x12e/0x150 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x188/0x320 ? usbio_disconnect+0x12e/0x150 kasan_report+0xe0/0x110 ? usbio_disconnect+0x12e/0x150 usbio_disconnect+0x12e/0x150 usb_unbind_interface+0xf3/0x400 really_probe+0x316/0x660 __driver_probe_device+0x106/0x240 driver_probe_device+0x4a/0x110 __device_attach_driver+0xf1/0x1a0 ? __pfx___device_attach_driver+0x10/0x10 bus_for_each_drv+0xf9/0x160 ? __pfx_bus_for_each_drv+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? trace_hardirqs_on+0x18/0x130 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __device_attach+0x133/0x2a0 ? __pfx___device_attach+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_raw_spin_unlock+0x9a/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 device_initial_probe+0x55/0x70 bus_probe_device+0x4a/0xd0 device_add+0x9b9/0xc10 ? __pfx_device_add+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x44/0x60 ? srso_alias_return_thunk+0x5/0xfbef5 ? lockdep_hardirqs_on_prepare+0xea/0x1a0 ? srso_alias_return_thunk+0x5/0xfbef5 ? usb_enable_lpm+0x3c/0x260 usb_set_configuration+0xb64/0xf20 usb_generic_driver_probe+0x5f/0x90 usb_probe_device+0x71/0x1b0 really_probe+0x46b/0x660 __driver_probe_device+0x106/0x240 driver_probe_device+0x4a/0x110 __device_attach_driver+0xf1/0x1a0 ? __pfx___device_attach_driver+0x10/0x10 bus_for_each_drv+0xf9/0x160 ? __pfx_bus_for_each_drv+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? trace_hardirqs_on+0x18/0x130 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __device_attach+0x133/0x2a0 ? __pfx___device_attach+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_raw_spin_unlock+0x9a/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 device_initial_probe+0x55/0x70 bus_probe_device+0x4a/0xd0 device_add+0x9b9/0xc10 ? __pfx_device_add+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? add_device_randomness+0xb7/0xf0 usb_new_device+0x492/0x870 hub_event+0x1b10/0x29c0 ? __pfx_hub_event+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0x187/0x300 ? process_one_work+0x475/0xb90 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 process_one_work+0x4d7/0xb90 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_hub_event+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: 6lowpan: fix NHC entry use-after-free on error path lowpan_nhc_do_uncompression() looks up an NHC descriptor while holding lowpan_nhc_lock. If the descriptor has no uncompress callback, the error path drops the lock before printing nhc->name. lowpan_nhc_del() removes descriptors under the same lock and then relies on synchronize_net() before the owning module can be unloaded. That only waits for net RX RCU readers. lowpan_header_decompress() is also exported and can be reached from callers that are not necessarily covered by the net core RX critical section, for example the Bluetooth 6LoWPAN L2CAP receive path. This leaves a race where one task drops lowpan_nhc_lock in the error path, another task unregisters and frees the matching descriptor after synchronize_net() returns, and the first task then dereferences nhc->name for the warning. With the post-unlock window widened, KASAN reports: BUG: KASAN: slab-use-after-free in lowpan_nhc_do_uncompression+0x1f4/0x220 Read of size 8 lowpan_nhc_do_uncompression lowpan_header_decompress Fix this by printing the warning before dropping lowpan_nhc_lock, so the descriptor name is read while unregister is still excluded. The malformed packet is still rejected with -ENOTSUPP.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: staging: vme_user: bound slave read/write to the kern_buf size The SLAVE-path helpers buffer_to_user() and buffer_from_user() copy 'count' bytes into/out of the fixed-size kern_buf (size_buf == PCI_BUF_SIZE == 0x20000, 128 KiB) using *ppos as the offset, without bounding *ppos + count against size_buf. vme_user_write()/vme_user_read() only clamp count to the VME window size (image_size = vme_get_size(resource)), which VME_SET_SLAVE sets from the user-supplied slave.size -- validated against the VME address space (up to VME_A32_MAX = 4 GiB), not against PCI_BUF_SIZE. When the window exceeds 128 KiB, a write()/read() copies past the kern_buf allocation. Clamp count against size_buf in both helpers, with an early return when *ppos is already at/after the buffer end. *ppos is >= 0 here (the caller rejects negative offsets), so size_buf - *ppos cannot wrap. This mirrors the existing clamp in the MASTER-path helpers resource_to_user() / resource_from_user(), and matches the read()/write() convention of a short transfer at end-of-buffer. Found by static analysis (CodeQL taint tracking + CBMC bounded model checking) and confirmed dynamically under KASAN with the vme_fake bridge: BUG: KASAN: slab-out-of-bounds in _copy_from_user+0x2d/0x80 Write of size 262144 at addr ffff888004100000 by task trigger/68 _copy_from_user+0x2d/0x80 vme_user_write+0x13e/0x240 [vme_user] vfs_write+0x1b8/0x7a0 ksys_write+0xb8/0x150

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: smb: client: restrict implied bcc[0] exemption to responses without data area smb2_check_message() has a long-standing quirk that accepts a response whose calculated length is one byte larger than the bytes actually received ("server can return one byte more due to implied bcc[0]"). This was introduced to accommodate servers that omit the trailing bcc[0] overlap byte when no data area is present. However, the exemption is applied unconditionally, regardless of whether the command actually carries a data area (has_smb2_data_area[]). When a response with a data area is subject to the +1 exemption, the reported data can extend one byte beyond the bytes actually received, yet smb2_check_message() still accepts it. The subsequent decoder then reads past the end of the receive buffer. This is reachable during NEGOTIATE and SESSION_SETUP, before the session is established. The resulting out-of-bounds reads are visible under KASAN when mounting against a non-conforming server; both the SPNEGO/negTokenInit and the NTLMSSP challenge decoders are affected: BUG: KASAN: slab-out-of-bounds in asn1_ber_decoder+0x16a7/0x1b00 Read of size 1 at addr ffff8880084d67c0 by task mount.cifs/81 CPU: 1 UID: 0 PID: 81 Comm: mount.cifs Not tainted 7.1.0-rc6 #1 Call Trace: <TASK> dump_stack_lvl+0x4e/0x70 print_report+0x157/0x4c9 kasan_report+0xce/0x100 asn1_ber_decoder+0x16a7/0x1b00 decode_negTokenInit+0x19/0x30 SMB2_negotiate+0x31d9/0x4c90 cifs_negotiate_protocol+0x1f2/0x3f0 cifs_get_smb_ses+0x93f/0x17e0 cifs_mount_get_session+0x7f/0x3a0 cifs_mount+0xb4/0xcf0 cifs_smb3_do_mount+0x23a/0x1500 smb3_get_tree+0x3b0/0x630 vfs_get_tree+0x82/0x2d0 fc_mount+0x10/0x1b0 path_mount+0x50d/0x1de0 __x64_sys_mount+0x20b/0x270 do_syscall_64+0xee/0x590 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 85: kmem_cache_alloc_noprof+0x106/0x380 mempool_alloc_noprof+0x116/0x1e0 cifs_small_buf_get+0x31/0x80 allocate_buffers+0x10d/0x2b0 cifs_demultiplex_thread+0x1d5/0x1d50 kthread+0x2c6/0x390 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 The buggy address is located 0 bytes to the right of allocated 448-byte region [ffff8880084d6600, ffff8880084d67c0) which belongs to the cache cifs_small_rq of size 448 BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x36/0x50 Read of size 329 at addr ffff88800726c678 by task mount.cifs/89 CPU: 0 UID: 0 PID: 89 Comm: mount.cifs Tainted: G B 7.1.0-rc6 #1 Call Trace: <TASK> dump_stack_lvl+0x4e/0x70 print_report+0x157/0x4c9 kasan_report+0xce/0x100 kasan_check_range+0x10f/0x1e0 __asan_memcpy+0x23/0x60 kmemdup_noprof+0x36/0x50 decode_ntlmssp_challenge+0x457/0x680 SMB2_sess_auth_rawntlmssp_negotiate+0x6f0/0xcb0 SMB2_sess_setup+0x219/0x4f0 cifs_setup_session+0x248/0xaf0 cifs_get_smb_ses+0xf79/0x17e0 cifs_mount_get_session+0x7f/0x3a0 cifs_mount+0xb4/0xcf0 cifs_smb3_do_mount+0x23a/0x1500 smb3_get_tree+0x3b0/0x630 vfs_get_tree+0x82/0x2d0 fc_mount+0x10/0x1b0 path_mount+0x50d/0x1de0 __x64_sys_mount+0x20b/0x270 do_syscall_64+0xee/0x590 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 93: kmem_cache_alloc_noprof+0x106/0x380 mempool_alloc_noprof+0x116/0x1e0 cifs_small_buf_get+0x31/0x80 allocate_buffers+0x10d/0x2b0 cifs_demultiplex_thread+0x1d5/0x1d50 kthread+0x2c6/0x390 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 The buggy address is located 120 bytes inside of allocated 448-byte region [ffff88800726c600, ffff88800726c7c0) which belongs to the cache cifs_small_rq of size 448 Restrict the +1 exemption to responses that have no data area, so that it still covers the bcc[0] omission it was meant for. When a data area is present, the +1 discrepancy instead means the reported data length overruns the ---truncated---

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: staging: media: ipu7: fix double-free and use-after-free in error paths In both ipu7_isys_init() and ipu7_psys_init(), pdata is allocated and then passed to ipu7_bus_initialize_device(), which stores it in adev->pdata. The ipu7_bus_release() function frees adev->pdata when the device's reference count drops to zero. Two error paths incorrectly call kfree(pdata) after the device teardown has already freed it: 1. When ipu7_mmu_init() fails: put_device() is called, which drops the reference count to zero and triggers ipu7_bus_release() -> kfree(pdata). The subsequent kfree(pdata) is a double-free. 2. When ipu7_bus_add_device() fails: it calls auxiliary_device_uninit() internally, which calls put_device() -> ipu7_bus_release() -> kfree(pdata). The subsequent kfree(pdata) is again a double-free. Note that the kfree(pdata) when ipu7_bus_initialize_device() itself fails is correct, because in that case auxiliary_device_init() failed and the release function was never set up, so pdata must be freed manually. Additionally, the error code was not saved before calling put_device(), causing ERR_CAST() to dereference the already-freed adev pointer when constructing the return value. Fix this by saving the error from dev_err_probe() before put_device() and returning ERR_PTR() instead. Remove the redundant kfree(pdata) calls and fix the use-after-free in the return values of the two affected error paths.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix heap buffer overflow in rtw_cfg80211_set_wpa_ie() supplicant_ie is a 256-byte array in struct security_priv. The WPA and WPA2 IE copy paths use: memcpy(padapter->securitypriv.supplicant_ie, &pwpa[0], wpa_ielen + 2); where wpa_ielen is the raw IE length field (u8, 0-255). When a local user supplies a connect request via nl80211 with a crafted WPA IE of length 255, wpa_ielen + 2 equals 257, overflowing the 256-byte buffer by one byte into the adjacent last_mic_err_time field. rtw_parse_wpa_ie() does not prevent this: its length consistency check compares *(wpa_ie+1) against (u8)(wpa_ie_len-2), which is (u8)(255) == 255 when wpa_ie_len = 257, so the check passes silently. Add explicit bounds checks for both the WPA and WPA2 paths before the memcpy, rejecting any IE whose total size (wpa_ielen + 2) exceeds the supplicant_ie buffer.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix WEP length underflow and OOB read in OnAuth() OnAuth() has two bugs in the shared-key authentication path. When the Privacy bit is set, rtw_wep_decrypt() is called without verifying that the frame is long enough to contain a valid WEP IV and ICV. Inside rtw_wep_decrypt(), length is computed as: length = len - WLAN_HDR_A3_LEN - iv_len and then passed as (length - 4) to crc32_le(). If len is less than WLAN_HDR_A3_LEN + iv_len + icv_len (32 bytes), length - 4 is negative and, after the implicit cast to size_t, causes crc32_le() to read far beyond the frame buffer. Add a minimum length check before accessing the IV field and calling the decryption path. When processing a seq=3 response, rtw_get_ie() stores the Challenge Text IE length in ie_len, but the subsequent memcmp() always reads 128 bytes regardless of ie_len. IEEE 802.11 mandates a challenge text of exactly 128 bytes; reject any IE whose length field differs, matching the check already applied to OnAuthClient().

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in OnAssocRsp() IE loop The IE parsing loop in OnAssocRsp() advances by (pIE->length + 2) each iteration but only guards on i < pkt_len. When a malicious AP sends an AssocResponse whose last IE has only one byte remaining in the frame (the element_id byte lands at pkt_len-1), the loop reads pIE->length from pframe[pkt_len], which is one byte past the allocated receive buffer. Additionally, even when the header bytes are in bounds, pIE->length itself can extend the data window beyond pkt_len, silently passing a truncated IE to the handler functions. Add two guards at the top of the loop body: 1. Break if fewer than sizeof(*pIE) bytes remain (can't read header). 2. Break if the IE's declared data extends past pkt_len.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in update_beacon_info() IE loop The IE parsing loop in update_beacon_info() advances by (pIE->length + 2) each iteration but only guards on i < len. When a malicious AP sends a Beacon whose last IE has only one byte remaining in the frame (the element_id byte lands at len-1), the loop reads pIE->length from one byte past the allocated receive buffer. Additionally, even when the header bytes are in bounds, pIE->length itself can extend the data window beyond len, passing a truncated IE to the handler functions. Add two guards at the top of the loop body: 1. Break if fewer than sizeof(*pIE) bytes remain (can't read header). 2. Break if the IE's declared data extends past len. Also replace i += (pIE->length + 2) with i += sizeof(*pIE) + pIE->length for consistency with the sizeof(*pIE) guards added above.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB reads in IE loops in issue_assocreq() and join_cmd_hdl() Two IE parsing loops are missing the header bounds checks before they dereference pIE->length: - issue_assocreq() walks pmlmeinfo->network.ies to build the association request. If the stored IE data ends with only an element_id byte and no length byte, pIE->length is read one byte past the end of the buffer. - join_cmd_hdl() walks pnetwork->ies during station join and has the same problem under the same conditions. Both buffers are filled from AP beacon and probe-response frames, so a malicious AP that sends a truncated final IE can trigger the issue. Apply the two-guard pattern established in update_beacon_info(): 1. Break if fewer than sizeof(*pIE) bytes remain. 2. Break if the IE's declared data extends past the buffer end.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB reads in rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr() Three IE/attribute parsing functions have missing bounds checks. rtw_get_sec_ie() and rtw_get_wapi_ie() iterate over a raw IE buffer without verifying that the header bytes (tag + length) are within the remaining buffer before reading them. Additionally, rtw_get_sec_ie() compares the 4-byte WPA OUI at cnt+2 without checking that at least 6 bytes remain, and rtw_get_wapi_ie() compares a 4-byte WAPI OUI at cnt+6 without checking that at least 10 bytes remain. rtw_get_wps_attr() reads wps_ie[0] and wps_ie+2 unconditionally at entry, before verifying that wps_ielen is large enough to contain the 6-byte WPS IE header (element_id + length + 4-byte OUI). Inside the attribute loop, get_unaligned_be16() is called on attr_ptr and attr_ptr+2 without checking that 4 bytes remain in the buffer. Add a cnt+2 bounds check before each loop body in rtw_get_sec_ie() and rtw_get_wapi_ie(), guard each multi-byte comparison with a minimum IE length requirement, add a wps_ielen < 6 early return in rtw_get_wps_attr(), and add a 4-byte bounds check in its inner loop.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB write in HT_caps_handler() HT_caps_handler() iterates pIE->length bytes and writes into HT_caps.u.HT_cap[], which is a fixed 26-byte array (sizeof struct HT_caps_element). Because pIE->length is a raw u8 from an over-the-air 802.11 AssocResponse frame and is never validated, a malicious AP can set it up to 255, causing up to 229 bytes of out-of-bounds writes into adjacent fields of struct mlme_ext_info. Truncate the iteration count to the size of HT_caps.u.HT_cap using umin() so that data from a longer-than-expected IE is silently ignored rather than written out of bounds, preserving interoperability with APs that pad the element. An early return on oversized IEs was considered but rejected: it would bypass the pmlmeinfo->HT_caps_enable = 1 assignment that precedes the loop, silently disabling HT mode for APs that append extra bytes to the HT Capabilities IE.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: crypto: qat - fix VF2PF work teardown race in adf_disable_sriov() The VF2PF interrupt handler queues PF-side response work that stores a raw pointer to per-VF state (struct adf_accel_vf_info). Currently, adf_disable_sriov() destroys per-VF mutexes and frees vf_info without stopping new VF2PF work or waiting for in-flight workers to complete. A concurrently scheduled or already queued worker can then dereference freed memory. This manifests as a use-after-free when KASAN is enabled: BUG: KASAN: null-ptr-deref in mutex_lock+0x76/0xe0 Write of size 8 at addr 0000000000000260 by task kworker/24:2/... Workqueue: qat_pf2vf_resp_wq adf_iov_send_resp [intel_qat] Call Trace: kasan_report+0x119/0x140 mutex_lock+0x76/0xe0 adf_gen4_pfvf_send+0xd4/0x1f0 [intel_qat] adf_recv_and_handle_vf2pf_msg+0x290/0x360 [intel_qat] adf_iov_send_resp+0x8c/0xe0 [intel_qat] process_one_work+0x6ac/0xfd0 worker_thread+0x4dd/0xd30 kthread+0x326/0x410 ret_from_fork+0x33b/0x670 Add a PF-local flag, vf2pf_disabled, that gates work queueing, worker processing, and interrupt re-enabling during teardown. Set this flag atomically with the hardware interrupt mask inside adf_disable_all_vf2pf_interrupts(). After masking, synchronize the AE cluster MSI-X interrupt and flush the PF response workqueue before tearing down per-VF locks and state so all in-flight work completes before vf_info is destroyed. Introduce adf_enable_all_vf2pf_interrupts() to clear the flag and unmask all VF2PF interrupts under the same lock when SR-IOV is re-enabled. This ensures the software flag and hardware state transition atomically on both the enable and disable paths.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of a deferred file_lock on SMB2_CLOSE then SMB2_CANCEL Commit f580d27e8928 ("ksmbd: fix use-after-free of a deferred file_lock on double SMB2_CANCEL") made smb2_cancel() skip a work whose state is KSMBD_WORK_CANCELLED, so its cancel_fn cannot be fired a second time. But KSMBD_WORK has three states (ACTIVE, CANCELLED, CLOSED), and the same freeing producer path is reached for CLOSED too: SMB2_CLOSE on the locking handle -> set_close_state_blocked_works() sets the deferred work's state to KSMBD_WORK_CLOSED and wakes the smb2_lock() worker. The worker takes the non-ACTIVE early-exit, locks_free_lock()s the file_lock and, because the state is not KSMBD_WORK_CANCELLED, takes the STATUS_RANGE_NOT_LOCKED branch with "goto out2" -- which, like the cancelled branch, skips release_async_work(). The work stays on conn->async_requests with a live cancel_fn = smb2_remove_blocked_lock pointing at the freed file_lock. A subsequent SMB2_CANCEL for the same AsyncId then passes the KSMBD_WORK_CANCELLED-only guard (its state is KSMBD_WORK_CLOSED), so smb2_cancel() fires cancel_fn again over the freed file_lock -- the same use-after-free fixed, via SMB2_CLOSE instead of a first SMB2_CANCEL: BUG: KASAN: slab-use-after-free in __locks_delete_block __locks_delete_block locks_delete_block ksmbd_vfs_posix_lock_unblock smb2_remove_blocked_lock smb2_cancel <- 2nd SMB2_CANCEL fires cancel_fn handle_ksmbd_work Allocated by ...: locks_alloc_lock <- smb2_lock Freed by ...: locks_free_lock <- smb2_lock (non-ACTIVE early-exit) ... cache file_lock_cache of size 192 Reproduced on mainline 7.1-rc7 (which already contains f580d27e8928) with KASAN by an authenticated SMB client; the double-SMB2_CANCEL control is silent on that kernel, so the splat is attributable to the CLOSE trigger. Only an ACTIVE deferred work may have its cancel_fn fired: both terminal states (CANCELLED and CLOSED) reach the smb2_lock() early-exit that frees the file_lock and skips release_async_work(). Guard on KSMBD_WORK_ACTIVE so any non-active work is skipped.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: net: af_key: initialize alg_key_len for IPComp states pfkey_msg2xfrm_state() handles the IPComp (SADB_X_SATYPE_IPCOMP) case by allocating x->calg and copying only the algorithm name: x->calg = kmalloc_obj(*x->calg); if (!x->calg) { err = -ENOMEM; goto out; } strcpy(x->calg->alg_name, a->name); x->props.calgo = sa->sadb_sa_encrypt; Unlike the authentication (x->aalg) and encryption (x->ealg) branches of the same function, the compression branch never initializes calg->alg_key_len. IPComp carries no key and the allocation only reserves sizeof(struct xfrm_algo) (i.e. no room for a key), so the field is left containing uninitialized slab data. calg->alg_key_len is later used as a length by xfrm_algo_clone() when an IPComp state is cloned during XFRM_MSG_MIGRATE: xfrm_state_migrate() xfrm_state_clone_and_setup() x->calg = xfrm_algo_clone(orig->calg); kmemdup(orig, xfrm_alg_len(orig)); where xfrm_alg_len() returns sizeof(*alg) + (alg_key_len + 7) / 8. With a non-zero garbage alg_key_len, kmemdup() reads past the end of the 68-byte calg object. Adding an IPComp SA via PF_KEY and then migrating it triggers (net-next, KASAN, init_on_alloc=0): BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x44/0x60 Read of size 4164 at addr ff11000025a74980 by task diag2/9287 CPU: 3 UID: 0 PID: 9287 Comm: diag2 7.1.0-rc6-g903db046d557 #1 Call Trace: <TASK> dump_stack_lvl+0x10e/0x1f0 print_report+0xf7/0x600 kasan_report+0xe4/0x120 kasan_check_range+0x105/0x1b0 __asan_memcpy+0x23/0x60 kmemdup_noprof+0x44/0x60 xfrm_state_migrate+0x70a/0x1da0 xfrm_migrate+0x753/0x18a0 xfrm_do_migrate+0xb47/0xf10 xfrm_user_rcv_msg+0x411/0xb50 netlink_rcv_skb+0x158/0x420 xfrm_netlink_rcv+0x71/0x90 netlink_unicast+0x584/0x850 netlink_sendmsg+0x8b0/0xdc0 ____sys_sendmsg+0x9f7/0xb90 ___sys_sendmsg+0x134/0x1d0 __sys_sendmsg+0x16d/0x220 do_syscall_64+0x116/0x7d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 9287: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 pfkey_add+0x2652/0x2ea0 pfkey_process+0x6d0/0x830 pfkey_sendmsg+0x42c/0x850 __sys_sendto+0x461/0x4b0 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0x116/0x7d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The buggy address belongs to the object at ff11000025a74980 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 0 bytes inside of allocated 68-byte region [ff11000025a74980, ff11000025a749c4) Depending on the uninitialized value the same field can instead request an oversized kmemdup() allocation and make the migration clone fail. The XFRM netlink path is not affected: verify_one_alg() rejects an XFRMA_ALG_COMP attribute shorter than xfrm_alg_len(), so a calg added via XFRM_MSG_NEWSA is always self-consistent. Initialize calg->alg_key_len to 0, matching the aalg/ealg branches.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: audit: Fix data races of skb_queue_len() readers on audit_queue Multiple readers access audit_queue.qlen via skb_queue_len() without holding the queue lock or using READ_ONCE(), while kauditd writes to this field via the skb_dequeue() → __skb_unlink() path with WRITE_ONCE() protected by a spinlock. This constitutes data races. All affected skb_queue_len(&audit_queue) call sites: - kauditd_thread() wait_event_freezable() condition - audit_receive_msg() AUDIT_GET handler (s.backlog assignment) - audit_receive() backlog check - audit_log_start() backlog check and pr_warn() KCSAN reports the following conflicting access pattern (one example): ================================================================== BUG: KCSAN: data-race in audit_log_start / skb_dequeue write (marked) to 0xffffffff8512ee20 of 4 bytes by task 661 on cpu 57: skb_dequeue+0x70/0xf0 kauditd_send_queue+0x71/0x220 kauditd_thread+0x1cb/0x430 kthread+0x1c2/0x210 ret_from_fork+0x162/0x1a0 ret_from_fork_asm+0x1a/0x30 read to 0xffffffff8512ee20 of 4 bytes by task 36586 on cpu 1: audit_log_start+0x2a0/0x6b0 audit_core_dumps+0x64/0xa0 do_coredump+0x14b/0x1260 get_signal+0xeb2/0xf70 arch_do_signal_or_restart+0x41/0x170 exit_to_user_mode_loop+0xa2/0x1c0 do_syscall_64+0x1a3/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0xe0 value changed: 0x00000001 -> 0x00000000 ================================================================== Resolve the race by switching to lockless helper skb_queue_len_lockless(), which internally uses READ_ONCE() and properly pairs with the WRITE_ONCE() write accesses already present on the writer side. [PM: line length tweak]

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref l2cap_chan_timeout() runs asynchronously and accesses chan->conn. If the connection is torn down while the timer is running or pending, chan->conn can be freed, leading to a use-after-free when the timer worker attempts to lock conn->lock: | BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:112 [inline] | BUG: KASAN: slab-use-after-free in atomic_long_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:4456 [inline] | BUG: KASAN: slab-use-after-free in __mutex_trylock_fast kernel/locking/mutex.c:161 [inline] | BUG: KASAN: slab-use-after-free in mutex_lock+0x4f/0xa0 kernel/locking/mutex.c:318 | Write of size 8 at addr ffff8881298d9550 by task kworker/2:1/83 | | CPU: 2 UID: 0 PID: 83 Comm: kworker/2:1 Not tainted 7.1.0-rc6-next-20260601-dirty #6 PREEMPT(full) | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 | Workqueue: events l2cap_chan_timeout | Call Trace: | <TASK> | instrument_atomic_read_write include/linux/instrumented.h:112 [inline] | atomic_long_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:4456 [inline] | __mutex_trylock_fast kernel/locking/mutex.c:161 [inline] | mutex_lock+0x4f/0xa0 kernel/locking/mutex.c:318 | l2cap_chan_timeout+0x5d/0x1b0 net/bluetooth/l2cap_core.c:422 | process_one_work kernel/workqueue.c:3326 [inline] | process_scheduled_works+0x7c8/0xfb0 kernel/workqueue.c:3409 | worker_thread+0x8a9/0xcf0 kernel/workqueue.c:3490 | kthread+0x346/0x430 kernel/kthread.c:436 | ret_from_fork+0x1a3/0x470 arch/x86/kernel/process.c:158 | ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 | </TASK> | | Allocated by task 320: | l2cap_conn_add+0xa7/0x820 net/bluetooth/l2cap_core.c:7075 | l2cap_connect_cfm+0xdb/0xd70 net/bluetooth/l2cap_core.c:7452 | hci_connect_cfm include/net/bluetooth/hci_core.h:2139 [inline] | hci_remote_features_evt+0x52f/0x9f0 net/bluetooth/hci_event.c:3760 | hci_event_func net/bluetooth/hci_event.c:7796 [inline] | hci_event_packet+0x561/0xa70 net/bluetooth/hci_event.c:7847 | hci_rx_work+0x370/0x890 net/bluetooth/hci_core.c:4040 | process_one_work kernel/workqueue.c:3326 [inline] | process_scheduled_works+0x7c8/0xfb0 kernel/workqueue.c:3409 | worker_thread+0x8a9/0xcf0 kernel/workqueue.c:3490 | kthread+0x346/0x430 kernel/kthread.c:436 | ret_from_fork+0x1a3/0x470 arch/x86/kernel/process.c:158 | ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 | | Freed by task 322: | hci_disconn_cfm include/net/bluetooth/hci_core.h:2154 [inline] | hci_conn_hash_flush+0x101/0x1f0 net/bluetooth/hci_conn.c:2736 | hci_dev_close_sync+0x889/0xde0 net/bluetooth/hci_sync.c:5405 | hci_dev_do_close net/bluetooth/hci_core.c:502 [inline] | hci_unregister_dev+0x1f7/0x370 net/bluetooth/hci_core.c:2679 | vhci_release+0x12a/0x180 drivers/bluetooth/hci_vhci.c:690 | __fput+0x369/0x890 fs/file_table.c:510 | task_work_run+0x160/0x1d0 kernel/task_work.c:233 | get_signal+0xf5b/0x1120 kernel/signal.c:2810 | arch_do_signal_or_restart+0x4d/0x600 arch/x86/kernel/signal.c:337 | __exit_to_user_mode_loop kernel/entry/common.c:64 [inline] | exit_to_user_mode_loop+0x85/0x510 kernel/entry/common.c:98 | do_syscall_64+0x263/0x3d0 arch/x86/entry/syscall_64.c:100 | entry_SYSCALL_64_after_hwframe+0x77/0x7f | | The buggy address belongs to the object at ffff8881298d9400 | which belongs to the cache kmalloc-512 of size 512 | The buggy address is located 336 bytes inside of | freed 512-byte region [ffff8881298d9400, ffff8881298d9600) Fix it by having chan->conn hold a reference to l2cap_conn (via l2cap_conn_get) when the channel is added to the connection, and releasing it in the channel destructor. This ensures the l2cap_conn remains alive as long as the channel exists. A new FLAG_DEL channel flag is introduced to indicate that the ch ---truncated---

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix UAF of hci_conn_params in add_device_complete add_device_complete() runs from the hci_cmd_sync_work kworker, which holds only hci_req_sync_lock and *not* hci_dev_lock. It calls hci_conn_params_lookup() and then dereferences the returned object (params->flags) without taking hci_dev_lock: params = hci_conn_params_lookup(hdev, &cp->addr.bdaddr, le_addr_type(cp->addr.type)); ... device_flags_changed(NULL, hdev, &cp->addr.bdaddr, cp->addr.type, hdev->conn_flags, params ? params->flags : 0); hci_conn_params_lookup() walks hdev->le_conn_params and is documented to require hdev->lock. A concurrent MGMT_OP_REMOVE_DEVICE (remove_device()), which does run under hci_dev_lock, can call hci_conn_params_free() to list_del() and kfree() the very object the lookup returned, so the subsequent params->flags read touches freed memory [0]. Hold hci_dev_lock() across the hci_conn_params_lookup() and the read of params->flags (and the matching event emission) so the lookup result cannot be freed by a concurrent remove_device() before it is used, honouring the locking contract of hci_conn_params_lookup(). [0]: (trailing page/memory-state dump trimmed) BUG: KASAN: slab-use-after-free in add_device_complete+0x358/0x3d8 net/bluetooth/mgmt.c:7671 Read of size 1 at addr ffff000017ab26c1 by task kworker/u9:8/388 CPU: 1 UID: 0 PID: 388 Comm: kworker/u9:8 Not tainted 7.0.11 #20 PREEMPT Hardware name: linux,dummy-virt (DT) Workqueue: hci0 hci_cmd_sync_work Call trace: show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:499 (C) __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xb4/0xd4 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x118/0x5d8 mm/kasan/report.c:482 kasan_report+0xb0/0xf4 mm/kasan/report.c:595 __asan_report_load1_noabort+0x20/0x2c mm/kasan/report_generic.c:378 add_device_complete+0x358/0x3d8 net/bluetooth/mgmt.c:7671 hci_cmd_sync_work+0x14c/0x240 net/bluetooth/hci_sync.c:334 process_one_work+0x628/0xd38 kernel/workqueue.c:3289 process_scheduled_works kernel/workqueue.c:3372 [inline] worker_thread+0x7a8/0xac0 kernel/workqueue.c:3453 kthread+0x39c/0x444 kernel/kthread.c:436 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Allocated by task 3401: kasan_save_stack+0x3c/0x64 mm/kasan/common.c:57 kasan_save_track+0x20/0x3c mm/kasan/common.c:78 kasan_save_alloc_info+0x40/0x54 mm/kasan/generic.c:570 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xd4/0xd8 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __kmalloc_cache_noprof+0x1b0/0x458 mm/slub.c:5385 kmalloc_noprof include/linux/slab.h:950 [inline] kzalloc_noprof include/linux/slab.h:1188 [inline] hci_conn_params_add+0x10c/0x4b0 net/bluetooth/hci_core.c:2279 hci_conn_params_set net/bluetooth/mgmt.c:5162 [inline] add_device+0x5b4/0xa54 net/bluetooth/mgmt.c:7755 hci_mgmt_cmd net/bluetooth/hci_sock.c:1721 [inline] hci_sock_sendmsg+0x10b4/0x1dd0 net/bluetooth/hci_sock.c:1841 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0xe0/0x128 net/socket.c:742 sock_write_iter+0x250/0x390 net/socket.c:1195 new_sync_write fs/read_write.c:595 [inline] vfs_write+0x66c/0xab0 fs/read_write.c:688 ksys_write+0x1fc/0x24c fs/read_write.c:740 __do_sys_write fs/read_write.c:751 [inline] __se_sys_write fs/read_write.c:748 [inline] __arm64_sys_write+0x70/0xa4 fs/read_write.c:748 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x84/0x2a8 arch/arm64/kernel/syscall.c:49 el0_svc_common.constprop.0+0xe4/0x294 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x44/0x5c arch/arm64/kernel/syscall.c:151 el0_svc+0x38/0xac arch/arm64/kernel/entry-common.c:724 el0t_64_sync_handler+0xa0/0xe4 arch/arm64/kernel/entry-common.c:743 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:596 Freed by task 3740: kasan_save_stack+0x3c/0x64 ---truncated---

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: validate Dirty Page Table capacity in log_replay copy_lcns In the analysis pass of $LogFile journal replay, log_replay() copies LCNs from each action log record into an existing Dirty Page Table (DPT) entry without bounding the destination index. A crafted NTFS image with DPT entry lcns_follow=1 and an action log record with lcns_follow=2 produces a kernel slab out-of-bounds write at mount time: BUG: KASAN: slab-out-of-bounds in log_replay+0x654c/0xdb60 Write of size 8 at addr ffff8880095e1040 by task mount Two attacker-controlled fields can drive j+i past the allocated page_lcns[] array: 1. dp->lcns_follow (capacity) can be smaller than lrh->lcns_follow. 2. lrh->target_vcn may be smaller than dp->vcn, making the u64 subtraction wrap to a huge size_t. Validate target VCN delta and per-record LCN count against the DPT entry capacity, bail via the existing out: cleanup label with -EINVAL. This mirrors the bounds-check pattern added in commit b2bc7c44ed17 ("fs/ntfs3: Fix slab-out-of-bounds read in DeleteIndexEntryRoot") and commit 0ca0485e4b2e ("fs/ntfs3: validate rec->used in journal-replay file record check").

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ntfs: avoid calling post_write_mst_fixup() for invalid index_block ntfs_icx_ib_sync_write() calls post_write_mst_fixup() when ntfs_ib_write() returns an error, intending to restore the buffer after a failed write. However, ntfs_ib_write() returns an error immediately if pre_write_mst_fixup() validation fails. The caller, ntfs_icx_ib_sync_write(), interprets any error as a write failure requiring rollback. It does not differentiate between I/O errors and validation failures, and calls post_write_mst_fixup() anyway. Since post_write_mst_fixup() assumes that the index_block contents is correct, it doesn't perform the boundary checks, which results in out-of-bounds memory access. An attacker can craft a malicious NTFS image with: - large index_block.usa_ofs offset, pointing outside the ntfs_record - index_block.usa_count = 0, causing integer underflow - or index_block.usa_count larger than actual number of sectors in the ntfs_record, causing out-of-bounds access KASAN reports describing the memory corruption: ================================================================== BUG: KASAN: slab-out-of-bounds in post_write_mst_fixup+0x19c/0x1d0 Read of size 2 at addr ffff8881586c9018 by task p/9428 Call Trace: <TASK> dump_stack_lvl+0x100/0x190 print_report+0x139/0x4ad ? post_write_mst_fixup+0x19c/0x1d0 ? __virt_addr_valid+0x262/0x500 ? post_write_mst_fixup+0x19c/0x1d0 kasan_report+0xe4/0x1d0 ? post_write_mst_fixup+0x19c/0x1d0 post_write_mst_fixup+0x19c/0x1d0 ntfs_icx_ib_sync_write+0x179/0x220 ntfs_inode_sync_filename+0x83d/0x1080 __ntfs_write_inode+0x1049/0x1480 ntfs_file_fsync+0x131/0x9b0 ================================================================== BUG: KASAN: slab-out-of-bounds in post_write_mst_fixup+0x1aa/0x1d0 Write of size 2 at addr ffff8881586c91fe by task p/9428 Call Trace: <TASK> dump_stack_lvl+0x100/0x190 print_report+0x139/0x4ad ? post_write_mst_fixup+0x1aa/0x1d0 ? __virt_addr_valid+0x262/0x500 ? post_write_mst_fixup+0x1aa/0x1d0 kasan_report+0xe4/0x1d0 ? post_write_mst_fixup+0x1aa/0x1d0 post_write_mst_fixup+0x1aa/0x1d0 ntfs_icx_ib_sync_write+0x179/0x220 ntfs_inode_sync_filename+0x83d/0x1080 __ntfs_write_inode+0x1049/0x1480 ntfs_file_fsync+0x131/0x9b0 ================================================================== Let's move the post_write_mst_fixup() call to ntfs_ib_write(). The ntfs_ib_write() function calls pre_write_mst_fixup() at the beginning. If the index_block contents is invalid, pre_write_mst_fixup() fails and ntfs_ib_write() returns early without calling post_write_mst_fixup() on bad index_block.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: NTB: epf: Avoid calling pci_irq_vector() from hardirq context ntb_epf_vec_isr() calls pci_irq_vector() in hardirq context to derive the vector number. pci_irq_vector() calls msi_get_virq() that takes a mutex and can therefore trigger "scheduling while atomic" splats: BUG: scheduling while atomic: kworker/u33:0/55/0x00010001 ... Call trace: ... schedule+0x38/0x110 schedule_preempt_disabled+0x28/0x50 __mutex_lock.constprop.0+0x848/0x908 __mutex_lock_slowpath+0x18/0x30 mutex_lock+0x4c/0x60 msi_domain_get_virq+0xe8/0x138 pci_irq_vector+0x2c/0x60 ntb_epf_vec_isr+0x28/0x120 [ntb_hw_epf] __handle_irq_event_percpu+0x70/0x3a8 handle_irq_event+0x48/0x100 handle_edge_irq+0x100/0x1c8 ... Cache the Linux IRQ number for vector 0 when vectors are allocated and use it as a base in the ISR. Running the ISR in a threaded IRQ handler would also avoid the problem, but that would be unnecessary here.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: netpoll: fix a use-after-free on shutdown path There is a use-after-free error on netpoll, which is clearly detected by KASAN. BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0x3b/0x80 Read of size 1 at addr ... by task kworker/9:1 Workqueue: events queue_process Call Trace: skb_dequeue+0x1e/0xb0 queue_process+0x2c/0x600 process_scheduled_works+0x4b6/0x850 worker_thread+0x414/0x5a0 Allocated by task 242: __netpoll_setup+0x201/0x4a0 netpoll_setup+0x249/0x550 enabled_store+0x32f/0x380 Freed by task 0: kfree+0x1b7/0x540 rcu_core+0x3f8/0x7a0 The problem happens when there is a pending TX worker running in parallel with the cleanup path. This is what happens on netpoll shutdown path: 1) __netpoll_cleanup() is called 2) set dev->npinfo to NULL 3) call_rcu() with rcu_cleanup_netpoll_info() 3.1) rcu_cleanup_netpoll_info() tries to cancel all workers with cancel_delayed_work(), but doesn't wait for the worker to finish 4) and kfree(npinfo); Because 3.1) doesn't really cancel the work, as the comment says "we can't call cancel_delayed_work_sync here, as we are in softirq", the TX worker can run after 4). Tl;DR: queue_process() is not an RCU reader, it reaches npinfo through the work item via container_of(). Use disable_delayed_work_sync() to ensure the worker is completely stopped and prevent any future re-arming attempts. Once npinfo is set to NULL, senders will bail out and not queue new work. The disable flag ensures any in-flight re-arming attempts also fail silently. In the future, we can do the cleanup inline here without needing the npinfo->rcu rcu_head, but that is net-next material.

Linux · Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP · Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP · Siemens SIPLUS S7-1500 CPU 1518-4 PN/DP MFP

In the Linux kernel, the following vulnerability has been resolved: ipv4: igmp: remove multicast group from hash table on device destruction When a device is destroyed under RTNL, ip_mc_destroy_dev() iterates through the multicast list and calls ip_ma_put() on each membership, scheduling them for RCU reclamation. However, they are not unlinked from the device's multicast hash table (mc_hash). Since the device remains published in dev->ip_ptr until after ip_mc_destroy_dev() completes, concurrent RCU readers traversing mc_hash can still locate and access the multicast group after its refcount is decremented. If the RCU callback runs and frees the group while a reader is accessing it, a use-after-free occurs. Fix this by unlinking the multicast group from mc_hash using ip_mc_hash_remove() before scheduling it for reclamation. BUG: KASAN: slab-use-after-free in ip_check_mc_rcu+0x149/0x3f0 Read of size 4 at addr ffff888009bf1408 by task mausezahn/2276 Call Trace: <IRQ> dump_stack_lvl+0x67/0x90 print_report+0x175/0x7c0 kasan_report+0x147/0x180 ip_check_mc_rcu+0x149/0x3f0 udp_v4_early_demux+0x36d/0x12d0 ip_rcv_finish_core+0xb8b/0x1390 ip_rcv_finish+0x54/0x120 NF_HOOK+0x213/0x2b0 __netif_receive_skb+0x126/0x340 process_backlog+0x4f2/0xf00 __napi_poll+0x92/0x2c0 net_rx_action+0x583/0xc60 handle_softirqs+0x236/0x7f0 do_softirq+0x57/0x80 </IRQ> Allocated by task 2239: kasan_save_track+0x3e/0x80 __kasan_kmalloc+0x72/0x90 ____ip_mc_inc_group+0x31a/0xa40 __ip_mc_join_group+0x334/0x3f0 do_ip_setsockopt+0x16fa/0x2010 ip_setsockopt+0x3f/0x90 do_sock_setsockopt+0x1ad/0x300 Freed by task 0: kasan_save_track+0x3e/0x80 kasan_save_free_info+0x40/0x50 __kasan_slab_free+0x3a/0x60 __rcu_free_sheaf_prepare+0xd4/0x220 rcu_free_sheaf+0x36/0x190 rcu_core+0x8d9/0x12f0 handle_softirqs+0x236/0x7f0

Linux · Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP · Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP · Siemens SIPLUS S7-1500 CPU 1518-4 PN/DP MFP

In the Linux kernel, the following vulnerability has been resolved: net: ipv4: bound TCP reordering sysctl writes and MTU probe sizes Reject invalid `net.ipv4.tcp_reordering` values before they reach TCP socket state. The sysctl is stored as an `int` but copied into the `u32` `tp->reordering` field for new sockets, so negative writes wrap to large values. With `tcp_mtu_probing=2`, the wrapped value can overflow the `tcp_mtu_probe()` size calculation and drive the MTU probing path into an out-of-bounds read. Route `tcp_reordering` writes through `proc_dointvec_minmax()` and require it to be at least 1. Also require `tcp_max_reordering` to be at least 1 so the configured maximum cannot become negative either. When registering the table for a non-init network namespace, relocate `extra2` pointers that refer into `init_net.ipv4` so the `tcp_reordering` upper bound follows that namespace's `tcp_max_reordering`. Harden `tcp_mtu_probe()` itself by computing `size_needed` as `u64`. This keeps the send queue and window checks from being bypassed through signed integer overflow.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Fix use-after-free on remove KASAN reports a slab-use-after-free in __media_entity_remove_link() during rmmod of imx8_isi: BUG: KASAN: slab-use-after-free in __media_entity_remove_link+0x608/0x650 Read of size 2 at addr ffff0000d47cb02a by task rmmod/724 Call trace: __media_entity_remove_link+0x608/0x650 __media_entity_remove_links+0x78/0x144 __media_device_unregister_entity+0x150/0x280 media_device_unregister_entity+0x48/0x68 v4l2_device_unregister_subdev+0x158/0x300 v4l2_async_unbind_subdev_one+0x22c/0x358 v4l2_async_nf_unbind_all_subdevs+0xfc/0x1c0 v4l2_async_nf_unregister+0x5c/0x14c mxc_isi_remove+0x124/0x2a0 [imx8_isi] Allocated by task 249: __kmalloc_noprof+0x27c/0x690 mxc_isi_crossbar_init+0x22c/0x560 [imx8_isi] Freed by task 724: kfree+0x1e4/0x5b0 mxc_isi_crossbar_cleanup+0x34/0x80 [imx8_isi] mxc_isi_remove+0x11c/0x2a0 [imx8_isi] The problem is that mxc_isi_remove() calls mxc_isi_crossbar_cleanup() before mxc_isi_v4l2_cleanup(). The crossbar cleanup frees the media entity pads, but the subsequent v4l2 cleanup still tries to remove media links that reference those pads. Fix this by calling mxc_isi_v4l2_cleanup() before mxc_isi_crossbar_cleanup() to ensure all media entities are properly unregistered while the pads are still valid.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: mfd: cros_ec: Delay dev_set_drvdata() until probe success If ec_device_probe() fails, cros_ec_class_release releases memory for the cros_ec_dev structure. However, because the drvdata was already set, sub-drivers like cros_ec_typec can still retrieve the stale pointer via the platform device. This leads to a use-after-free when cros_ec_typec attempts to access &typec->ec->ec->dev on a device that has already been released. Move dev_set_drvdata() to ensure that the pointer is only made available once all initialization steps have succeeded. sysfs: cannot create duplicate filename '/class/chromeos/cros_ec' Call trace: sysfs_do_create_link_sd+0x94/0xdc sysfs_create_link+0x30/0x44 device_add_class_symlinks+0x90/0x13c device_add+0xf0/0x50c ec_device_probe+0x150/0x4f0 platform_probe+0xa0/0xe0 ... BUG: KASAN: invalid-access in __memcpy+0x44/0x230 Write at addr f5ffff809e2d33ac by task kworker/u32:5/125 Pointer tag: [f5], memory tag: [fe] Tainted : [W]=WARN, [O]=OOT_MODULE Hardware name: Google Navi unprovisioned 0x7FFFFFFF/sku0 board/sku3 Workqueue: events_unbound deferred_probe_work_func Call trace: __memcpy+0x44/0x230 cros_ec_check_features+0x60/0xcc [cros_ec_proto] cros_typec_probe+0xe8/0x6e0 [cros_ec_typec] platform_probe+0xa0/0xe0

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: mm: shrinker: fix shrinker_info teardown race with expansion expand_shrinker_info() iterates all visible memcgs under shrinker_mutex, including memcgs that have not finished ->css_online() yet. Once pn->shrinker_info has been published, teardown must stay serialized with expand_shrinker_info() until that memcg is either fully online or no longer visible to iteration. Today alloc_shrinker_info() breaks that rule by dropping shrinker_mutex before freeing a partially initialized shrinker_info array, which may cause the following race: CPU0 CPU1 ==== ==== css_create --> list_add_tail_rcu(&css->sibling, &parent_css->children); online_css --> mem_cgroup_css_online --> alloc_shrinker_info --> alloc node0 info rcu_assign_pointer(C->node0->shrinker_info, old0) alloc node1 info -> FAIL -> goto err mutex_unlock(shrinker_mutex) shrinker_alloc() --> shrinker_memcg_alloc --> mutex_lock(shrinker_mutex) expand_shrinker_info --> mem_cgroup_iter see the memcg expand_one_shrinker_info --> old0 = C->node0->shrinker_info memcpy(new->unit, old0->unit, ...); free_shrinker_info --> kvfree(old0); /* double free !! */ kvfree_rcu(old0, rcu); The same problem exists later in mem_cgroup_css_online(). If alloc_shrinker_info() succeeds but a subsequent objcg allocation fails, the free_objcg -> free_shrinker_info() unwind path tears down the already published pn->shrinker_info arrays without shrinker_mutex. The expand_one_shrinker_info() can race with that teardown in the same way, leading to use-after-free or double-free of the old shrinker_info. Fix this by serializing shrinker_info teardown with shrinker_mutex, and by keeping alloc_shrinker_info() error cleanup inside the locked section.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: netfilter: handle unreadable frags sashiko reports: When an skb with unreadable fragments (such as from devmem TCP, where skb_frags_readable(skb) returns false) is processed by the u32 module, skb_copy_bits() will safely return a negative error code [..] xt_u32: bail out with hotdrop in this case. gather_frags: return -1, just as if we had no fragment header. nfnetlink_queue: restrict to the linear part. nfnetlink_log: restrict to the linear part. v2: - skb_zerocopy helpers don't copy readable flag, i.e. nfnetlink_queue is broken too xt_u32 shouldn't return true if hotdrop was set.

Linux · Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP · Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP · Siemens SIPLUS S7-1500 CPU 1518-4 PN/DP MFP

In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: zero chainstack array sashiko reports: looking at ebtables table translation, could a sparse cpu_possible_mask lead to an uninitialized pointer free? If cpu_possible_mask is sparse (for example, CPU 0 and CPU 2 are possible, but CPU 1 is not), the allocation loop skips CPU 1. If vmalloc_node() fails at CPU 2, the cleanup loop will blindly decrement and call vfree() on newinfo->chainstack[1]. Not a real-world bug, such allocation isn't expected to fail in the first place.

Linux · Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP · Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP · Siemens SIPLUS S7-1500 CPU 1518-4 PN/DP MFP

In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: module names must be null-terminated We need to explicitly check the length, else we may pass non-null terminated string to request_module().

Linux · Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP · Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP · Siemens SIPLUS S7-1500 CPU 1518-4 PN/DP MFP

In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: terminate table name before find_table_lock() update_counters() and compat_update_counters() forward a user-supplied 32-byte table name to find_table_lock() without NUL-terminating it. On a lookup miss, find_inlist_lock() calls try_then_request_module(..., "%s%s", "ebtable_", name), and vsnprintf() reads past the name field and the stack object until it hits a zero byte. BUG: KASAN: stack-out-of-bounds in string (lib/vsprintf.c:648 lib/vsprintf.c:730) Read of size 1 at addr ffff8880119dfb20 by task exploit/147 Call Trace: ... string (lib/vsprintf.c:648 lib/vsprintf.c:730) vsnprintf (lib/vsprintf.c:2945) __request_module (kernel/module/kmod.c:150) do_update_counters.isra.0 (net/bridge/netfilter/ebtables.c:371 net/bridge/netfilter/ebtables.c:380) update_counters (net/bridge/netfilter/ebtables.c:1440) do_ebt_set_ctl (net/bridge/netfilter/ebtables.c:2573) nf_setsockopt (net/netfilter/nf_sockopt.c:101) ip_setsockopt (net/ipv4/ip_sockglue.c:1424) raw_setsockopt (net/ipv4/raw.c:847) __sys_setsockopt (net/socket.c:2393) ... compat_do_replace() shares the same unterminated name via compat_copy_ebt_replace_from_user(); terminate it there too so all find_table_lock() callers behave alike. The other callers already terminate the name after the copy.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bnep: pin L2CAP connection during netdev registration bnep_add_connection() reads the L2CAP connection without holding the channel lock, then passes its HCI device to register_netdev(). Controller teardown can clear and release that connection concurrently, leaving the network device registration path to dereference a freed parent device. Take a reference to the L2CAP connection while holding the channel lock. Retain it until register_netdev() has taken the parent device reference.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Fix out-of-bounds firmware read in nxp_recv_fw_req_v3() During the v3 firmware download the controller sends a v3_data_req with a 32 bit offset and a 16 bit len. nxp_recv_fw_req_v3() checks only the lower bound of the offset and then sends firmware from that offset. nxpdev->fw_dnld_v3_offset = offset - nxpdev->fw_v3_offset_correction; serdev_device_write_buf(nxpdev->serdev, nxpdev->fw->data + nxpdev->fw_dnld_v3_offset, len); Nothing checks that fw_dnld_v3_offset + len stays within nxpdev->fw->size, so a controller that asks for an offset or length past the firmware image makes the driver read past the end of nxpdev->fw->data and send that memory back over UART. nxp_recv_fw_req_v1() already bounds the same write. Add the equivalent check to the v3 path, reject the request when it falls outside the firmware image, and zero len on the error path so the fw_v3_prev_sent bookkeeping at free_skb stays consistent.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix UAF in bt_accept_dequeue() bt_accept_get() takes a temporary reference before dropping the accept queue lock. bt_accept_dequeue() currently drops that reference before bt_accept_unlink(), leaving only the queue reference. bt_accept_unlink() drops the queue reference. The subsequent sock_hold() therefore accesses freed memory if it was the final reference, as observed by KASAN during listening L2CAP socket cleanup. Retain the temporary queue-walk reference through unlink and hand it to the caller on success. Drop it explicitly on the closed and not-yet-connected paths.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: validate option length before reading conf opt value l2cap_get_conf_opt() derives the option length from the attacker-controlled opt->len field and immediately dereferences opt->val (as u8, get_unaligned_le16() or get_unaligned_le32(), or a raw pointer for the default case) before any caller has confirmed that opt->len bytes are present in the buffer. The callers (l2cap_parse_conf_req(), l2cap_parse_conf_rsp() and l2cap_conf_rfc_get()) only detect a malformed option afterwards, once the running length has gone negative, by which point the out-of-bounds read has already executed. An existing post-hoc length check keeps the garbage value from being consumed, so this is not a data leak in the current control flow. It is still a validate-after-use ordering bug: up to 4 bytes are read past the end of the buffer before it is known to contain them, and it is fragile to future changes in the callers. Fix it at the source. Pass the end of the buffer into l2cap_get_conf_opt() and refuse to touch opt->val unless the full option (header + value) fits. Each caller computes an end pointer once before the loop and checks the return value directly instead of inferring the error from a negative length.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer() When the SMB sink is used as a perf AUX sink, smb_update_buffer() calls smb_sync_perf_buffer() to copy hardware trace data into the perf AUX ring buffer pages. It derives pg_idx = head >> PAGE_SHIFT from @head, which is handle->head, and indexes dst_pages[pg_idx]. The pg_idx %= nr_pages normalization is only applied after the first loop iteration. This leaves the initial page index underived from the buffer size, which can result in an out-of-bounds write past dst_pages[] when head exceeds the AUX buffer size. Normalize head modulo the AUX buffer size before deriving the page index and offset, mirroring tmc_etr_sync_perf_buffer().

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: smb: client: resolve SWN tcon from live registrations cifs_swn_notify() looks up a witness registration by id under cifs_swnreg_idr_mutex, drops the mutex, and then uses the registration's cached tcon pointer. That pointer is not a lifetime reference, and it is not a stable representative once cifs_get_swn_reg() lets multiple tcons for the same net/share name share one registration id. A same-share second mount can keep the cifs_swn_reg alive after the first tcon unregisters and is freed. The registration then still points at the freed first tcon, so taking tc_lock or incrementing tc_count through swnreg->tcon only moves the use-after-free earlier. Taking tc_lock while holding cifs_swnreg_idr_mutex also violates the documented CIFS lock order. Fix this by making the registration store only the stable witness identity: id, net name, share name, and notify flags. When a notify arrives, copy that identity under cifs_swnreg_idr_mutex, drop the mutex, then find and pin a live witness tcon that currently matches the net/share pair under the normal cifs_tcp_ses_lock -> tc_lock order. The notification path uses that pinned tcon directly and drops the reference when done. Registration and unregister messages now use the live tcon passed by the caller instead of a cached tcon in the registration. The final unregister send is folded into cifs_swn_unregister() while the registration is still protected by cifs_swnreg_idr_mutex. This removes the previous find/drop/reacquire raw-pointer window. The release path only removes the idr entry and frees the stable identity strings. This preserves the intended one-registration/many-tcon behavior: a registration id represents a net/share pair, and notify handling acts on a live representative selected at use time. It also preserves CLIENT_MOVE ordering for the representative tcon because the old-IP unregister is sent before cifs_swn_register() sends the new-IP register.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ksmbd: prevent path traversal bypass by restricting caseless retry ksmbd_vfs_path_lookup() enforces LOOKUP_BENEATH to restrict path resolution within the share root. When a crafted path attempts to escape the share boundary using parent-directory components ('..'), vfs_path_parent_lookup() detects this and immediately fails, returning -EXDEV. However, a bug exists in __ksmbd_vfs_kern_path() under caseless mode. The function fails to intercept the -EXDEV error and erroneously falls through to the caseless retry logic, which is intended only for genuinely missing files. During this retry process, the path is reconstructed, leading to an unintended LOOKUP_BENEATH bypass that allows write-capable users to create zero-length files or directories outside the exported share. Fix this by ensuring that the execution only proceeds to the caseless lookup retry when the error is specifically -ENOENT. Any other errors, such as -EXDEV from a path traversal attempt, must be returned immediately.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ksmbd: add a permission check for FSCTL_SET_ZERO_DATA FSCTL_SET_ZERO_DATA in smb2_ioctl() destroys file data via ksmbd_vfs_zero_data() -> vfs_fallocate(PUNCH_HOLE/ZERO_RANGE) after checking only the share-level KSMBD_TREE_CONN_FLAG_WRITABLE, with no per-handle access check. A handle opened with only FILE_WRITE_ATTRIBUTES still yields an FMODE_WRITE filp (FILE_WRITE_ATTRIBUTES is part of FILE_WRITE_DESIRE_ACCESS_LE, so smb2_create_open_flags() opens it O_WRONLY), so the vfs_fallocate FMODE_WRITE check does not stop it; only the missing fp->daccess gate would. Reproduced on mainline 7.1-rc7 with KASAN by an authenticated SMB client: a FILE_WRITE_ATTRIBUTES-only handle zeroed 4096 bytes of file data it had no FILE_WRITE_DATA right to (6/6; a FILE_READ_DATA-only handle was correctly denied). This is the unfixed sibling of commit cc57232cae23 ("ksmbd: fix FSCTL permission bypass by adding a permission check for FSCTL_SET_SPARSE"). Because SET_ZERO_DATA writes data (not an attribute), require FILE_WRITE_DATA.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix UAF of struct file_lock in SMB2_LOCK deferred-lock cancellation When a blocking byte-range lock request is deferred in the FILE_LOCK_DEFERRED path, ksmbd registers the asynchronous work into the connection's async_requests list via setup_async_work(). The cancel callback smb2_remove_blocked_lock() holds a reference to the flock. If the lock waiter is subsequently woken up but the work state is no longer KSMBD_WORK_ACTIVE (e.g., due to a concurrent cancellation), the cleanup path calls locks_free_lock(flock) without dequeuing the work from the async_requests list. Concurrently, smb2_cancel() walks the list under conn->request_lock and invokes the cancel callback, which then dereferences the already freed 'flock'. This leads to a slab-use-after-free inside __wake_up_common. Fix this by restructuring the cleanup logic after the worker returns from ksmbd_vfs_posix_lock_wait(). Move list_del(&smb_lock->llist) and release_async_work(work) to the top of the cleanup block. This guarantees that the async work is completely dequeued and serialized under conn->request_lock before locks_free_lock(flock) is called, rendering the flock unreachable for any concurrent smb2_cancel().

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ksmbd: require source read access for duplicate extents FSCTL_DUPLICATE_EXTENTS_TO_FILE passes the source file directly to vfs_clone_file_range() or vfs_copy_file_range() without checking the SMB access mask granted to the source handle. A handle opened with attribute access can consequently be used to copy file contents into an attacker-readable destination. Require FILE_READ_DATA on the source handle before either VFS operation, matching other ksmbd data-copy paths.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ksmbd: add a WRITE_DAC/WRITE_OWNER check to SMB2 SET_INFO SECURITY commit cc57232cae23 ("ksmbd: fix FSCTL permission bypass by adding a permission check for FSCTL_SET_SPARSE") added a fp->daccess gate to fsctl_set_sparse and noted that "similar handle-level checks exist in other functions but are missing here." The SMB2 SET_INFO SECURITY arm is one of the missing ones, and the most security-relevant: smb2_set_info_sec() calls set_info_sec() with no per-handle access check. set_info_sec() (fs/smb/server/smbacl.c) re-permissions the file: it rewrites owner/group/mode via notify_change(), rewrites the POSIX ACL via set_posix_acl(), and on KSMBD_SHARE_FLAG_ACL_XATTR shares removes and rewrites the Windows security descriptor via ksmbd_vfs_set_sd_xattr(). Every other persistent-mutation arm of the sibling handler smb2_set_info_file() checks fp->daccess first (FILE_WRITE_DATA / FILE_DELETE / FILE_WRITE_EA / FILE_WRITE_ATTRIBUTES); the SECURITY arm — which mutates the access control itself — is the only one with no gate. A client can therefore open a handle with FILE_WRITE_ATTRIBUTES only (no FILE_WRITE_DAC / FILE_WRITE_OWNER) and use SMB2_SET_INFO with InfoType SMB2_O_INFO_SECURITY to rewrite the file's DACL and owner, granting itself access the handle's daccess never carried. Unlike the FSCTL data arms this is a metadata/xattr operation, so there is no FMODE_WRITE VFS backstop — the missing fp->daccess check is the entire gate. Setting a security descriptor is the WRITE_DAC / WRITE_OWNER operation, so require at least one of those on the handle before re-permissioning the file. -EACCES is mapped to STATUS_ACCESS_DENIED by smb2_set_info().

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ksmbd: track the connection owning a byte-range lock SMB2_LOCK adds each granted byte-range lock to both the file lock list and the lock list of the connection which handled the request. The final close and durable handle paths, however, remove the connection list entry while holding fp->conn->llist_lock. With SMB3 multichannel, the connection handling the LOCK request can be different from the connection which opened the file. The entry can therefore be removed under a different spinlock from the one protecting the list it belongs to. A concurrent traversal can then access freed struct ksmbd_lock and struct file_lock objects. Record the connection owning each lock's clist entry and hold a reference to it while the entry is linked. Use that connection and its llist_lock for unlock, rollback, close, and durable preserve. Durable reconnect assigns the new connection as the owner when publishing the locks again.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate NTLMv2 response before updating session key ksmbd_auth_ntlmv2() derives the NTLMv2 session key into sess->sess_key before it verifies the NTLMv2 response. ksmbd_decode_ntlmssp_auth_blob() then continues into KEY_XCH even when ksmbd_auth_ntlmv2() failed. With SMB3 multichannel binding, the failed authentication operates on an existing session and the session setup error path does not expire binding sessions. A client can send a binding session setup with a bad NT proof and KEY_XCH and still modify sess->sess_key before STATUS_LOGON_FAILURE is returned. Relevant path: smb2_sess_setup() -> conn->binding = true -> ntlm_authenticate() -> session_user() -> ksmbd_decode_ntlmssp_auth_blob() -> ksmbd_auth_ntlmv2() -> calc_ntlmv2_hash() -> hmac_md5_usingrawkey(..., sess->sess_key) -> crypto_memneq() returns mismatch -> KEY_XCH arc4_crypt(..., sess->sess_key, ...) -> out_err without expiring the binding session Derive the base session key into a local buffer and copy it to sess->sess_key only after the proof matches. Return immediately on authentication failure so KEY_XCH is only processed after successful authentication.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: smb/client: fix chown/chgrp with SMB3 POSIX Extensions Ownership (chown) and group (chgrp) modifications were being ignored when mounting with SMB3 POSIX Extensions unless CIFS_MOUNT_CIFS_ACL or CIFS_MOUNT_MODE_FROM_SID were also explicitly set. Fix this by checking for posix_extensions in cifs_setattr_nounix() when updating UID and GID, ensuring that id_mode_to_cifs_acl() is called to map and set the ownership/group information on the server.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix double-free in SMB2_open() replay A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_open_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: smb: client: Fix next buffer leak in receive_encrypted_standard() receive_encrypted_standard() allocates next_buffer before checking whether the number of compound PDUs already reached MAX_COMPOUND. If the limit check fails, the function returns immediately and the newly allocated next_buffer is not assigned to server->smallbuf/server->bigbuf, making it leaked. Move the MAX_COMPOUND check before allocating next_buffer.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: smb: client: harden POSIX SID length parsing posix_info_sid_size() reads sid[1] to obtain the subauthority count, but its existing boundary check still accepts buffers with only one remaining byte. Require two bytes before reading sid[1] so all client paths that reuse the helper reject truncated POSIX SIDs safely.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: smb: client: mask server-provided mode to 07777 in modefromsid When modefromsid is active, parse_dacl() applies the server-provided sub_auth[2] value from the NFS mode SID to cf_mode without masking to 07777. Apply the correct masking, same as in the read path.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: writeback: fix race between cgroup_writeback_umount() and inode_switch_wbs() When a container exits, the following BUG_ON() is occasionally triggered: ================================================================== VFS: Busy inodes after unmount of sdb (ext4) ------------[ cut here ]------------ kernel BUG at fs/super.c:695! CPU: 3 PID: 6 Comm: containerd-shim Tainted: G OE K 6.6 #1 pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : generic_shutdown_super+0xf0/0x100 lr : generic_shutdown_super+0xf0/0x100 Call trace: generic_shutdown_super+0xf0/0x100 kill_block_super+0x20/0x48 ext4_kill_sb+0x28/0x60 deactivate_locked_super+0x54/0x130 deactivate_super+0x84/0xa0 cleanup_mnt+0xa4/0x140 __cleanup_mnt+0x18/0x28 task_work_run+0x78/0xe0 do_notify_resume+0x204/0x240 ================================================================== The root cause is a race between cgroup_writeback_umount() and inode_switch_wbs()/cleanup_offline_cgwb(). There is a window between inode_prepare_wbs_switch() returning true and the subsequent wb_queue_isw() call. Following is the process that triggers the issue: CPU A (umount) | CPU B (writeback) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ inode_switch_wbs/cleanup_offline_cgwb atomic_inc(&isw_nr_in_flight) inode_prepare_wbs_switch -> passes SB_ACTIVE check __iget(inode) generic_shutdown_super sb->s_flags &= ~SB_ACTIVE cgroup_writeback_umount(sb) smp_mb() atomic_read(&isw_nr_in_flight) rcu_barrier() -> no pending RCU callbacks flush_workqueue(isw_wq) -> nothing queued, returns evict_inodes(sb) -> Inode skipped as isw still holds a ref. sop->put_super(sb) /* destroys percpu counters */ -> VFS: Busy inodes after unmount! wb_queue_isw() queue_work(isw_wq, ...) /* later in work function */ inode_switch_wbs_work_fn process_inode_switch_wbs iput() -> evict percpu_counter_dec() // UAF! Fix this by extending the RCU read-side critical section in inode_switch_wbs() and cleanup_offline_cgwb() to cover from inode_prepare_wbs_switch() through wb_queue_isw(). Since there is no sleep in this window, rcu_read_lock() can be used. Then add a synchronize_rcu() in cgroup_writeback_umount() before the existing rcu_barrier(), so that all in-flight switchers that have passed the SB_ACTIVE check have completed queue_work() before flush_workqueue() is called. The existing rcu_barrier() is intentionally retained so this fix can be backported unchanged to stable kernels (5.10.y, 6.6.y, ...) that still queue switches via queue_rcu_work(). It is a no-op on current mainline (since commit e1b849cfa6b6 ("writeback: Avoid contention on wb->list_lock when switching inodes")) and is removed in a follow-up patch.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: cpufreq: qcom-cpufreq-hw: Fix possible double free qcom_cpufreq.data is allocated with devm_kzalloc() in probe() as an array of per-domain data. qcom_cpufreq_hw_cpu_init() stores a pointer to one element of this array in policy->driver_data. qcom_cpufreq_hw_cpu_exit() currently calls kfree() on policy->driver_data. This is not valid because the memory is devm-managed. For the first domain, this can free the devm-managed allocation while the devres entry is still active, leading to a possible double free when the platform device is later detached. For other domains, the pointer may refer to an element inside the array rather than the allocation base. Remove the kfree(data) call and let devres release qcom_cpufreq.data. This issue was found by a static analysis tool I am developing.

Linux · Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP · Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP · Siemens SIPLUS S7-1500 CPU 1518-4 PN/DP MFP

In the Linux kernel, the following vulnerability has been resolved: proc: protect ptrace_may_access() with exec_update_lock (FD links) proc_pid_get_link() and proc_pid_readlink() currently look up the task from the pid once, then do the ptrace access check on that task, then look up the task from the pid a second time to do the actual access. That's racy in several ways. To fix it, pass the task to the ->proc_get_link() handler, and instead of proc_fd_access_allowed(), introduce a new helper call_proc_get_link() that looks up and locks the task, does the access check, and calls ->proc_get_link().

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: sched/rt: Have RT_PUSH_IPI be default off for non PREEMPT_RT RT migration is done aggressively. When a CPU schedules out a high priority RT task for a lower priority task, it will look to see if there's any RT tasks that are waiting to run on another CPU that is of higher priority than the task this CPU is about to run. If it finds one, it will pull that task over to the CPU and allow it to run there instead. Normally, this pulling is done by looking at the RT overloaded mask (rto) which contains all the CPUs in the scheduler domain with RT tasks that are waiting to run due to a higher priority RT task currently running on their CPU. The CPU that is about to schedule a lower priority task will grab the rq lock of the overloaded CPU and move the RT task from that CPU's runqueue to the local one and schedule the higher priority RT task. This caused issues when a lot of CPUs would schedule a lower priority task at the same time. They would all try to grab the same runqueue lock of the CPU with the overloaded RT tasks. Only the first CPU that got in will get that task. All the others would wait until they got the runqueue lock and see there's nothing to pull and do nothing. On systems with lots of CPUs, this caused a large latency (up to 500us) which is beyond what PREEMPT_RT is to allow. The solution to that was to create an RT_PUSH_IPI logic. When any CPU wanted to pull a task, instead of grabbing the runqueue lock of the overloaded CPU, it would start by sending an IPI to the overloaded CPU, and that IPI handler would have the CPU with the waiting RT task do a push instead. Then that handler would send an IPI to the next CPU with overloaded RT tasks, and so on. Note, after the first CPU starts this process, if another CPU wanted to do a pull, it would see that the process has already begun and would only increment a counter to have the IPIs continue again. The RT_PUSH_IPI solved the latency problem with PREEMPT_RT but could cause a new issue with non PREEMPT_RT. Namely, softirqs run in a threaded context on PREEMPT_RT but they can run in an interrupt context in non-RT. If an IPI lands on a CPU that has just woken up multiple RT tasks and the current CPU is running a non RT or a low priority RT task, instead of doing a push, it would simply do a schedule on that CPU. But if a softirq was also executing on this CPU, the schedule would need to wait until the softirq finished. Until then, the CPU would still be considered overloaded as there are RT tasks still waiting to run on it. A live lock occurred on a workload that was doing heavy networking traffic on a large machine where the softirqs would run 500us out of 750us. And it would also be waking up RT tasks, causing the RT pull logic to be constantly executed. When a softirq triggered on a CPU with RT tasks queued but not running yet, and the other CPUs would see this CPU as being overloaded, they would send an IPI over to it. The CPU would notice that the waiting RT tasks are of higher priority than the currently running task and simply schedule that CPU instead. But because the softirq was executing, before it could schedule, it would receive another IPI to do the same. The amount of IPIs would slow down the currently running softirq so much that before it could return back to task context, it would execute another softirq never allowing the CPU to schedule. This live locked that CPU. As RT_PUSH_IPI was created to help PREEMPT_RT, make it default off if PREEMPT_RT is not enabled.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: cpufreq: pcc: fix use-after-free and double free in _OSC evaluation pcc_cpufreq_do_osc() calls acpi_evaluate_object() twice for the two-phase _OSC negotiation. Between the two calls it freed output.pointer but left output.length unchanged. Since acpi_evaluate_object() treats a non-zero length with a non-NULL pointer as an existing buffer to write into, the second call wrote into freed memory (use-after-free). The subsequent kfree(output.pointer) at out_free then freed the same pointer a second time (double free). Reset output.pointer to NULL and output.length to ACPI_ALLOCATE_BUFFER after freeing the first result, so ACPICA allocates a fresh buffer for each phase independently.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: mm/slab: do not limit zeroing to orig_size when only red zoning is enabled When init (zeroing) on allocation is requested, for kmalloc() we generally have to zero the full object size even if a smaller size is requested, in order to provide krealloc()'s __GFP_ZERO guarantees. But if we track the requested size, krealloc() uses that information to do the right thing, so we can zero only the requested size. With red zoning also enabled, any extra size became part of the red zone, so it must not be zeroed and thus we must zero only the requested size. However the current check is imprecise, and will trigger also when only SLAB_RED_ZONE is enabled without SLAB_STORE_USER (which enables tracking the requested size). This means enabling red zoning alone can compromise krealloc()'s __GFP_ZERO contract. Fix this by using slub_debug_orig_size() instead, which is the exact check for whether the requested size is tracked. We don't need to care if red zoning is also enabled or not. Also update and expand the comment accordingly.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: HID: hid-goodix-spi: validate report size to prevent stack buffer overflow goodix_hid_set_raw_report() builds a protocol frame in a 128-byte stack buffer (tmp_buf), writing an 11-12 byte header followed by the caller-supplied report data. The HID core caps report size at HID_MAX_BUFFER_SIZE (16384) by default, while the driver does not set hid_ll_driver.max_buffer_size and performs no bounds checking before copying the payload: memcpy(tmp_buf + tx_len, buf, len); A hidraw SET_REPORT ioctl with a report larger than ~116 bytes overflows the stack buffer. Add a size check after constructing the header, rejecting reports that would exceed the buffer capacity. Discovered by Atuin - Automated Vulnerability Discovery Engine.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix slab-out-of-bounds write in wacom_wac_queue_insert wacom_wac_queue_insert() calls kfifo_skip() in a loop when the kfifo doesn't have enough space for the incoming report. If the kfifo is empty, kfifo_skip() reads stale data left in the kmalloc'd buffer via __kfifo_peek_n() and interprets it as a record length, advancing fifo->out by that garbage value. This corrupts the internal kfifo state, causing kfifo_unused() to return a value much larger than the actual buffer size, which bypasses __kfifo_in_r()'s guard: if (len + recsize > kfifo_unused(fifo)) return 0; kfifo_copy_in() then performs an out-of-bounds memcpy, writing up to 3842 bytes past the 256-byte buffer. Add a !kfifo_is_empty() condition to the while loop so kfifo_skip() is never called on an empty fifo, and check the return value of kfifo_in() to reject reports that are too large for the fifo.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: HID: letsketch: fix UAF on inrange_timer at driver unbind letsketch_driver does not provide a .remove callback, but letsketch_probe() arms a per-device timer: timer_setup(&data->inrange_timer, letsketch_inrange_timeout, 0); The timer is re-armed from letsketch_raw_event() with a 100 ms timeout on every pen-in-range report, and its callback dereferences data->input_tablet to deliver a synthetic BTN_TOOL_PEN release. letsketch_data is allocated with devm_kzalloc(), and its input_dev fields are devm-allocated via letsketch_setup_input_tablet(). On device unbind (USB unplug or rmmod), the HID core runs its default teardown and devm cleanup frees both letsketch_data and the input devices. Because no .remove callback exists, nothing drains the timer first: if raw_event armed it within ~100 ms of the unbind, the pending timer fires on freed memory. This is a UAF read of data and of data->input_tablet, followed by input_report_key() / input_sync() into the freed input_dev. The same problem can occur on the probe error path: if hid_hw_start() enabled I/O on an always-poll-quirk device and then failed, raw_event may have armed the timer before devm releases data. Fix by adding a .remove callback that calls hid_hw_stop() first. hid_hw_stop() synchronously kills the URBs that deliver raw_event(), so once it returns no path can re-arm the timer. timer_shutdown_sync() then drains any in-flight callback and permanently disables further mod_timer() calls. Apply the same timer_shutdown_sync() in the probe error path so the timer is guaranteed not to outlive data.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: fix out-of-bounds bit access on mt_io_flags mt_io_flags is a single unsigned long, but mt_process_slot(), mt_release_pending_palms() and mt_release_contacts() use it as a per-slot bitmap indexed by the slot number. That slot number is only bounded by td->maxcontacts, which is taken from the device's ContactCountMaximum feature report and can be up to 255, not by BITS_PER_LONG. As a result, a multitouch device that advertises a large contact count makes set_bit()/clear_bit() operate past the mt_io_flags word and corrupt the adjacent members of struct mt_device. The sticky-fingers release timer is the easiest way to reach this. mt_release_contacts() runs for (i = 0; i < mt->num_slots; i++) clear_bit(i, &td->mt_io_flags); with num_slots == maxcontacts. For maxcontacts around 250 the loop clears the bits that overlap td->applications.next, zeroing that list head, and the list_for_each_entry() that immediately follows then dereferences NULL. The kernel panics from timer (softirq) context. On a KASAN build this shows up as a general protection fault in mt_release_contacts() with a null-ptr-deref at offset 0x58, which is offsetof(struct mt_application, num_received). The state is reachable from an untrusted USB or Bluetooth HID multitouch device; no local privileges are required. Store the per-slot active state in a separately allocated bitmap sized for maxcontacts, the same pattern already used for pending_palm_slots, and keep only MT_IO_FLAGS_RUNNING in mt_io_flags. The two "mt_io_flags & MT_IO_SLOTS_MASK" arming checks become bitmap_empty(td->active_slots, td->maxcontacts). Move MT_IO_FLAGS_RUNNING back to bit 0. It was bumped to bit 32 by the same commit to leave the low byte for the slot bits; with the slot bits gone it fits in bit 0 again, which also keeps it within the unsigned long on 32-bit.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: HID: appleir: fix UAF on pending key_up_timer in remove() appleir_remove() runs hid_hw_stop() before timer_delete_sync(). hid_hw_stop() synchronously unregisters the HID input device via hid_disconnect() -> hidinput_disconnect() -> input_unregister_device(), which drops the last reference and frees the underlying input_dev when no userspace handle holds it open. key_up_tick() reads appleir->input_dev and calls input_report_key() / input_sync() on it. The timer is armed from appleir_raw_event() with a HZ/8 (~125 ms) timeout on every keydown and key-repeat report. If a key was pressed shortly before the device is disconnected, the timer can fire after hid_hw_stop() has freed input_dev but before the teardown drains it. A simple reorder is not sufficient. Putting the timer drain first still leaves a window where a USB URB completion (raw_event) running during hid_hw_stop() can call mod_timer() and re-arm the timer, which then fires after hidinput_disconnect() has freed input_dev. The same URB-completion window also lets raw_event() reach key_up(), key_down() and battery_flat() directly, all of which dereference appleir->input_dev. Introduce a 'removing' flag on struct appleir, gated by the existing spinlock. appleir_remove() sets the flag under the lock and then shuts down the timer with timer_shutdown_sync(), which both drains any in-flight callback and permanently disables further mod_timer() calls. appleir_raw_event() and key_up_tick() bail out early if the flag is set, so no path can arm or run the timer, or dereference appleir->input_dev, after remove() has started tearing down. The keyrepeat and flatbattery branches of appleir_raw_event() previously called into the input layer without holding the spinlock; take it now so the flag check is well-defined. This incidentally closes a pre-existing read-side race on appleir->current_key in the keyrepeat branch. This bug is structurally a sibling of commit 4db2af929279 ("HID: appletb-kbd: fix UAF in inactivity-timer cleanup path") and has been present since the driver was introduced.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: HID: lg-g15: cancel pending work on remove to fix a use-after-free lg_g15_data is allocated with devm and holds a work item. The report handlers schedule that work straight from device input. lg_g15_event() and lg_g15_v2_event() do it on the backlight cycle key, and lg_g510_leds_event() does it too. The worker dereferences the lg_g15_data back through container_of. The driver had no remove callback and never cancelled the work. So if a report scheduled the work and the keyboard was then unplugged, devres freed lg_g15_data while the work was still pending or running, and the worker touched freed memory. This is a use-after-free. It is reachable as a race on device unplug. Add a remove callback that cancels the work before devres frees the state. g15->work is only initialized for the models that schedule it (G15, G15 v2, G510). The G13 and Z-10 leave it zeroed, so guard the cancel on g15->work.func to avoid cancelling a work that was never set up. The g15 NULL test mirrors the one already in lg_g15_raw_event().

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: hfs/hfsplus: fix u32 overflow in check_and_correct_requested_length check_and_correct_requested_length() compares (off + len) against node_size using u32 arithmetic. When the caller passes a large len value (e.g. from an underflowed subtraction in hfs_brec_remove()), off + len can wrap past 2^32 and produce a small result, causing the bounds check to pass when it should fail. For example, with off=14 and len=0xFFFFFFF2 (underflowed from data_off - keyoffset - size in hfs_brec_remove), off + len wraps to 6, which is less than a typical node_size of 512, so the check passes and the subsequent memmove reads ~4GB past the node buffer. Fix this by widening the addition to u64 before comparing against node_size. This prevents the u32 wrap while keeping the logic straightforward.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: bpf: Validate BTF repeated field counts before expansion btf_parse_struct_metas() walks user-supplied BTF during BPF_BTF_LOAD, and btf_repeat_fields() expands repeatable fields from array elements into the fixed BTF_FIELDS_MAX scratch array used by btf_parse_fields(). The remaining-capacity check performs the expanded field count calculation in u32. A malformed BTF can wrap that calculation, causing the check to pass even when the expanded field count exceeds the scratch array capacity. The following memcpy() can then write past the end of the array. Use checked addition and multiplication before copying repeated fields and reject impossible counts.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: bpf: Allow LPM map access from sleepable BPF programs trie_lookup_elem() annotates its rcu_dereference_check() walks with only rcu_read_lock_bh_held(). Because rcu_dereference_check(p, c) resolves to "c || rcu_read_lock_held()", this passes for XDP/NAPI and classic RCU readers but fails for sleepable BPF programs, which enter via __bpf_prog_enter_sleepable() and hold only rcu_read_lock_trace(). trie_update_elem() and trie_delete_elem() have the same problem in a different form: they walk the trie with plain rcu_dereference(), which asserts rcu_read_lock_held() unconditionally. Both are reachable from sleepable BPF programs via the bpf_map_update_elem / bpf_map_delete_elem helpers, and from the syscall path under classic rcu_read_lock(). In the writer paths the trie is actually protected by trie->lock (an rqspinlock taken across the walk); we never relied on the RCU read-side lock to keep nodes alive there. A sleepable LSM hook that ends up touching an LPM trie therefore triggers lockdep on debug kernels: ============================= WARNING: suspicious RCU usage 7.1.0-... Tainted: G E ----------------------------- kernel/bpf/lpm_trie.c:249 suspicious rcu_dereference_check() usage! 1 lock held by net_tests/540: #0: (rcu_tasks_trace_srcu_struct){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x26/0x280 Call Trace: dump_stack_lvl lockdep_rcu_suspicious trie_lookup_elem bpf_prog_..._enforce_security_socket_connect bpf_trampoline_... security_socket_connect __sys_connect do_syscall_64 This is lockdep-only -- no UAF, since Tasks Trace RCU does serialize against the trie's reclaim path -- but it spams the console once per distinct callsite on every debug kernel running a sleepable BPF LSM that touches an LPM trie, which is increasingly common. For the lookup path, switch the rcu_dereference_check() annotation from rcu_read_lock_bh_held() to bpf_rcu_lock_held(), which accepts all three contexts (classic, BH, Tasks Trace). Other map types already follow this convention. For trie_update_elem() and trie_delete_elem(), annotate the walks as rcu_dereference_protected(*p, 1) -- matching trie_free() in the same file -- since trie->lock is held across the walk. rqspinlock has no lockdep_map, so the predicate degenerates to '1' rather than lockdep_is_held(&trie->lock); the protection is real but not machine-verifiable. trie_get_next_key() also uses bare rcu_dereference() but is reachable only from the BPF syscall, which holds classic rcu_read_lock() before dispatching, so it is left untouched.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: usb: free iso schedules on failed submit EHCI and FOTG210 isochronous submits build an ehci_iso_sched before linking the URB to the endpoint queue, and keep the staged schedule in urb->hcpriv until iso_stream_schedule() and the link helpers consume it. If the controller is no longer accessible, or usb_hcd_link_urb_to_ep() fails, submit jumps to done_not_linked before that handoff happens and leaks the staged schedule still attached to urb->hcpriv. Free the staged schedule from done_not_linked when submit fails before the URB is linked and clear urb->hcpriv after the free. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have an EHCI host controller with a USB isochronous device to test with, no runtime testing was able to be performed.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: udc: Fix use-after-free in gadget_match_driver The udc structure acts as the management structure for the gadget, but their lifecycles are decoupled. A race condition exists where usb_del_gadget() frees the udc memory (e.g., via mode-switch work) while gadget_match_driver() concurrently accesses the freed udc memory (e.g., via configfs), causing a Use-After-Free (UAF) that triggers a NULL pointer dereference when the freed memory is zeroed: [39430.908615][ T1171] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [39430.911397][ T1171] pc : __pi_strcmp+0x20/0x140 [39430.911441][ T1171] lr : gadget_match_driver+0x34/0x60 ... [39430.911890][ T1171] usb_gadget_register_driver_owner+0x50/0xf8 [39430.911910][ T1171] gadget_dev_desc_UDC_store+0xf4/0x140 [39430.931308][ T1171] configfs_write_iter+0xec/0x134 [39430.957058][ T1171] Workqueue: events_freezable __dwc3_set_mode [39430.957287][ T1171] dwc3_gadget_exit+0x34/0x8c [39430.957304][ T1171] __dwc3_set_mode+0xc0/0x664 Fix this by ensuring the udc structure remains allocated until the gadget is released. To achieve this, introduce a new usb_gadget_release() routine to the core. When the gadget is added, usb_add_gadget() stores the gadget's release routine in the udc structure and takes a reference to the udc. When the gadget is released, usb_gadget_release() drops the reference to the udc and then calls the gadget's release routine.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: USB: idmouse: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: USB: ldusb: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect Submitted write URBs are not stopped on close() and therefore need to be stopped unconditionally on disconnect() to avoid use-after-free in the completion handler.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: USB: legousbtower: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: bound bulk IN response length to the received transfer usbio_bulk_msg() copies bpkt_len = le16_to_cpu(bpkt->len) bytes out of the bulk IN buffer (usbio->rxbuf, allocated with size usbio->rxbuf_len) into the caller's buffer. bpkt_len is fully controlled by the device and is only checked against ibuf_len; ibuf_len in turn is checked against usbio->txbuf_len, not against rxbuf_len: if ((obuf_len > (usbio->txbuf_len - sizeof(*bpkt))) || (ibuf_len > (usbio->txbuf_len - sizeof(*bpkt)))) return -EMSGSIZE; txbuf_len and rxbuf_len are taken independently from the bulk OUT and bulk IN endpoint wMaxPacketSize in usbio_probe(). A malicious or malfunctioning device that advertises a large bulk OUT endpoint and a small bulk IN endpoint (e.g. by claiming one of the quirk-free IDs such as the Lattice NX33U, 0x2ac1:0x20cb) therefore makes ibuf_len, and hence the device-supplied bpkt_len, exceed rxbuf_len. memcpy() then reads up to txbuf_len - rxbuf_len bytes past the end of the rxbuf slab object. The over-read bytes are handed back to the i2c layer and on to user space through i2c-dev, disclosing adjacent slab memory; with KASAN this is reported as a slab-out-of-bounds read. The number of bytes actually received is already known: act equals the URB actual_length and is bounded by rxbuf_len. Reject any response that claims more payload than was received, mirroring the existing "act < sizeof(*bpkt)" check just above. The control path (usbio_ctrl_msg()) is not affected: it uses a single buffer (ctrlbuf) for both directions, so its analogous copy can never leave the allocation. Found by code review. The out-of-bounds read was confirmed under AddressSanitizer with a faithful userspace model of usbio_bulk_msg()'s receive path (an rxbuf_len-sized buffer, the same act/ibuf_len/bpkt_len checks and the memcpy). A USB raw-gadget + dummy_hcd reproducer is also available.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix write buffer corruption The digi_write_inb_command() is supposed to wait for the write urb to become available or return an error, but instead it updates the transfer buffer and tries to resubmit the urb on timeout. To make things worse, for commands like break control where no timeout is used, the driver would corrupt the urb immediately due to a broken jiffies comparison (on 32-bit machines this takes five minutes of uptime to trigger due to INITIAL_JIFFIES). Fix this by adding the missing return on timeout and waiting indefinitely when no timeout has been specified as intended. This issue was (sort of) flagged by Sashiko when reviewing an unrelated change to the driver.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: Validate SVID index in svdm_consume_modes() In svdm_consume_modes(), the SVID value is read from pmdata->svids using pmdata->svid_index as an array index without bounds validation: paltmode->svid = pmdata->svids[pmdata->svid_index]; If pmdata->svid_index is driven beyond SVID_DISCOVERY_MAX (16), it results in an out-of-bounds read of the pmdata->svids array. Because pd_mode_data is embedded inside struct tcpm_port, indexing past svids reads into adjacent fields. In particular: - At index 16, it reads the altmodes count. - At index 18 and beyond, it reads into altmode_desc[], which contains partner-supplied SVDM Discovery Modes VDOs. By injecting a chosen SVID into altmode_desc[0].vdo and driving svid_index to 20, the partner can force paltmode->svid to be loaded with an arbitrary, partner- chosen SVID, which is then registered via typec_partner_register_altmode(). Fix this by validating that pmdata->svid_index is non-negative and strictly less than pmdata->nsvids before accessing the pmdata->svids array inside svdm_consume_modes().

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: ccg: Fix use-after-free of ucsi on remove The threaded IRQ handler ccg_irq_handler() calls ucsi_notify_common(), which on a connector-change event calls ucsi_connector_change() and schedules connector work. In ucsi_ccg_remove(), ucsi_destroy() frees uc->ucsi (kfree) before free_irq() is called, so a handler invocation already in flight may access the freed object after ucsi_destroy(). CPU 0 (remove) | CPU 1 (threaded IRQ) ucsi_destroy(uc->ucsi) | ccg_irq_handler() kfree(ucsi) // FREE | ucsi_notify_common(uc->ucsi) // USE Move free_irq() before ucsi_destroy() in the remove path. It is kept after ucsi_unregister(): ucsi_unregister() cancels connector work whose handler issues GET_CONNECTOR_STATUS through ucsi_send_command_common(), which waits for a completion that is signalled from the IRQ handler, so the IRQ must stay active until that work has been cancelled. The probe error path already orders free_irq() before ucsi_destroy(). This bug was found by static analysis.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: udf: validate free block extents against the partition length udf_free_blocks() checks the logical block number and count against the partition length, but drops the extent offset from that final bound. A crafted extent can pass the guard while logicalBlockNum + offset + count points past the partition, which later indexes past the space bitmap array. A single ftruncate(2) on a file backed by such an extent reliably panics the kernel. This is a local availability issue. On desktop systems where UDisks/polkit allows the active user to mount removable UDF media without CAP_SYS_ADMIN, an unprivileged local user can supply the crafted filesystem and trigger the panic by truncating a writable file on it. Systems that require root or CAP_SYS_ADMIN to mount the image have a higher prerequisite. No confidentiality or integrity impact is claimed: the reproduced primitive is an out-of-bounds read of a bitmap pointer slot followed by a kernel panic. Use the already computed logicalBlockNum + offset + count value for the partition length check. Also make load_block_bitmap() reject an out-of-range block group before indexing s_block_bitmap[], so corrupted callers cannot walk past the flexible array.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: udf: validate VAT header length against the VAT inode size udf_load_vat() takes the virtual partition's start offset straight from the on-disk VAT 2.0 header without checking it against the VAT inode size: map->s_type_specific.s_virtual.s_start_offset = le16_to_cpu(vat20->lengthHeader); map->s_type_specific.s_virtual.s_num_entries = (sbi->s_vat_inode->i_size - map->s_type_specific.s_virtual.s_start_offset) >> 2; lengthHeader is a fully attacker-controlled 16-bit value. If it exceeds the VAT inode size, the s_num_entries subtraction underflows to a huge count, which defeats the "block > s_num_entries" bound in udf_get_pblock_virt15(); and on the ICB-inline path that function reads ((__le32 *)(iinfo->i_data + s_start_offset))[block] so a large s_start_offset indexes past the inode's in-ICB data. Mounting a crafted UDF image with a virtual (VAT) partition then triggers an out-of-bounds read. Reject a VAT whose header length does not leave room for at least one entry within the VAT inode.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: udf: validate sparing table length as an entry count, not a byte count udf_load_sparable_map() accepts a sparing table when sizeof(*st) + le16_to_cpu(st->reallocationTableLen) > sb->s_blocksize is false, i.e. it treats reallocationTableLen as a number of BYTES that must fit in the block. But the table is walked as an array of 8-byte sparingEntry elements: for (i = 0; i < le16_to_cpu(st->reallocationTableLen); i++) { struct sparingEntry *entry = &st->mapEntry[i]; ... entry->origLocation ... } in udf_get_pblock_spar15() and udf_relocate_blocks(). A reallocationTableLen of N therefore passes the check whenever sizeof(*st) + N <= blocksize, yet the consumers index sizeof(*st) + N * sizeof(struct sparingEntry) bytes -- up to ~8x the block. On a crafted UDF image this is an out-of-bounds read in udf_get_pblock_spar15(); udf_relocate_blocks() additionally feeds the same length to udf_update_tag(), whose crc_itu_t() reads far past the block, and its memmove() through st->mapEntry[] is an out-of-bounds write. Validate reallocationTableLen as the entry count it is, with struct_size().

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: partitions: aix: bound the pp_count scan to the ppe array aix_partition() reads the physical volume descriptor into a fixed-size struct pvd and then scans its physical-partition-extent array: int numpps = be16_to_cpu(pvd->pp_count); ... for (i = 0; i < numpps; i += 1) { struct ppe *p = pvd->ppe + i; ... lp_ix = be16_to_cpu(p->lp_ix); pvd points at a single kmalloc()'d struct pvd whose ppe[] member holds a fixed ARRAY_SIZE(pvd->ppe) (1016) entries, but the loop runs up to the on-disk pp_count. pp_count is an unvalidated __be16 read straight from the descriptor, so a crafted AIX image with pp_count larger than 1016 drives the loop to read pvd->ppe[i] past the end of the allocation (up to 65535 entries, ~2 MB out of bounds). The partition scan runs without mounting anything, when a block device with a crafted AIX/IBM partition table appears (an attacker-supplied image attached with losetup -P, or a device auto-scanned by udev), via msdos_partition() -> aix_partition(). Clamp the scan to the number of entries the ppe[] array can hold.

Linux · Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP · Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP · Siemens SIPLUS S7-1500 CPU 1518-4 PN/DP MFP

In the Linux kernel, the following vulnerability has been resolved: isofs: bound Rock Ridge symlink components to the SL record get_symlink_chunk() and the SL handling in parse_rock_ridge_inode_internal() walk the variable-length components of a Rock Ridge "SL" (symbolic link) record. Each component is a two-byte header (flags, len) followed by len bytes of text, so it occupies slp->len + 2 bytes. Both loops read slp->len and advance to the next component, and get_symlink_chunk() additionally does memcpy(rpnt, slp->text, slp->len), but neither checks that the component lies within the SL record before dereferencing it. A crafted SL record whose component declares a len that runs past the record (rr->len) therefore triggers an out-of-bounds read of up to 255 bytes. When the record sits at the tail of its backing buffer - for example a small kmalloc()ed continuation block reached through a CE record - the read crosses the allocation; get_symlink_chunk() then copies the out-of-bounds bytes into the symlink body returned to user space by readlink(), disclosing adjacent kernel memory. ISO 9660 images are routinely mounted from untrusted removable media - desktop environments auto-mount them (e.g. via udisks2) without CAP_SYS_ADMIN - so the record contents are attacker-controlled. Reject any component that does not fit in the remaining record bytes before using it. In get_symlink_chunk() return NULL, like the existing output-buffer (plimit) checks, so a malformed record makes readlink() fail with -EIO rather than silently returning a truncated target; in parse_rock_ridge_inode_internal() stop the inode-size walk.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: crypto: caam - use print_hex_dump_devel to guard key hex dumps Use print_hex_dump_devel() for dumping sensitive key material in *_setkey() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG is enabled.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: crypto: ecc - Fix carry overflow in vli multiplication The carry flag calculation fails when r01.m_high is saturated (0xFFFFFFFFFFFFFFFF) and addition of lower bits overflows. The condition (r01.m_high < product.m_high) doesn't handle the case where r01.m_high == product.m_high and an additional carry exists from lower-bit overflow. When commit 3c4b23901a0c ("crypto: ecdh - Add ECDH software support") introduced crypto/ecc.c, it split the muladd() function in the micro-ecc library into separate mul_64_64() and add_128_128() helpers. It seems the check got lost in translation. Add proper handling for this boundary by accounting for the carry from the lower addition.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: crypto: pcrypt - restore callback for non-parallel fallback pcrypt installs pcrypt_aead_done() on the child AEAD request before trying to submit it through padata. If padata_do_parallel() returns -EBUSY, pcrypt falls back to calling the child AEAD directly. That fallback must not keep the padata completion callback. Otherwise an asynchronous completion runs pcrypt_aead_done() even though the request was never enrolled in padata. Restore the original request callback and callback data before calling the child AEAD directly. This keeps the fallback path aligned with a direct AEAD request while leaving the parallel path unchanged.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: crypto: loongson - Remove broken and unused loongson-rng The loongson-rng rng_alg has several vulnerabilities, including not providing forward security, and a use-after-free bug due to the use of wait_for_completion_interruptible(). Meanwhile, the rng_alg framework doesn't really have any purpose in the first place other than to access the software algorithms crypto/drbg.c and crypto/jitterentropy.c. Hardware-specific rng_algs have no in-kernel user, and unlike hwrng there's no feed into the actual Linux RNG. As such, there's really no point to this code. There are of course other rng_alg drivers that are similarly unused, but they're similarly in the process of being phased out, e.g. https://lore.kernel.org/r/20260529193648.18172-1-ebiggers@kernel.org and https://lore.kernel.org/r/20260529220430.34135-1-ebiggers@kernel.org Given that, there's no point in fixing forward these vulnerabilities, and it makes much more sense to simply roll back the addition of this driver. If this platform provides TRNG (not PRNG) functionality, it could make sense to add a hwrng driver, but it would be quite different.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: crypto: qat - protect service table iterations with service_lock The service_table list is protected by service_lock when entries are added or removed (in adf_service_add() and adf_service_remove()), but several functions iterate over the list without holding this lock. A concurrent adf_service_register() or adf_service_unregister() call could modify the list during traversal, leading to list corruption or a use-after-free. Fix this by holding service_lock across all list_for_each_entry() iterations of service_table in adf_dev_init(), adf_dev_start(), adf_dev_stop(), adf_dev_shutdown(), adf_dev_restarting_notify(), adf_dev_restarted_notify(), and adf_error_notifier(). The lock ordering is safe: callers of the static helpers (adf_dev_up() and adf_dev_down()) acquire state_lock before service_lock, and no event_hld callback or service_lock holder ever acquires state_lock in the reverse order.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: crypto: qat - validate RSA CRT component lengths The generic RSA key parser (rsa_helper.c) bounds each CRT component (p, q, dp, dq, qinv) by the modulus size n_sz, but qat_rsa_setkey_crt() allocates half-size DMA buffers (key_sz / 2) and right-aligns each component with: memcpy(dst + half_key_sz - len, src, len) When a CRT component is larger than half_key_sz the subtraction underflows and memcpy writes past the DMA buffer, causing memory corruption. Add a len > half_key_sz check next to the existing !len check for each of the five CRT components so the driver falls back to the non-CRT path instead of writing out of bounds.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: perf/aux: Fix page UAF in map_range() map_range() reads rb->aux_pages[], rb->aux_nr_pages and rb->aux_pgoff via perf_mmap_to_page() while holding only event->mmap_mutex. Those fields are serialized by rb->aux_mutex, and mmap_mutex is per event. Thus, two events sharing one rb via PERF_EVENT_IOC_SET_OUTPUT can race rb_alloc_aux() with map_range(), leading to a page-UAF scenario as follows: CPU 0 CPU 1 ===== ===== rb_alloc_aux() map_range() [1]: allocate rb->aux_pages[0] [2]: rb->aux_nr_pages++ [3]: perf_mmap_to_page() returns rb->aux_pages[0] [4]: map it as VM_PFNMAP [5]: rb->aux_pgoff = 1 munmap the page [6]: free rb->aux_pages[0] Pages mapped as VM_PFNMAP have no refcount protection, so CPU 1 holds a mapping to a freed physical frame. Fix this by taking rb->aux_mutex across the page walk in map_range().

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: tracing: Prevent out-of-bounds read in glob matching String event fields are not necessarily NUL-terminated, so the filter predicate functions (filter_pred_string(), filter_pred_strloc() and filter_pred_strrelloc()) pass the field length to the regex match callbacks, and the length-aware matchers honour it. regex_match_glob() was the exception: it ignored the length and called glob_match(), which scans the string until it hits a NUL byte. Some string fields are not NUL-terminated. One example is the dynamic char array of the xfs_* namespace tracepoints, which is copied without a trailing NUL. For such a field, glob matching reads past the end of the event field, causing a KASAN slab-out-of-bounds read in glob_match(), reached via regex_match_glob() and filter_match_preds() from the xfs_lookup tracepoint. Add a length-bounded glob_match_len() and use it from regex_match_glob() so glob matching always stops at the field boundary. The matching loop is factored into a shared helper so glob_match() keeps its behaviour.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: NFSv4: include MAY_WRITE in open permission mask for O_TRUNC POSIX requires write permission to truncate a file, so an open() that specifies O_TRUNC must be authorized for write access regardless of the O_ACCMODE access mode. nfs_open_permission_mask() builds the access mask passed to nfs_may_open(), which is the local authorization gate for OPENs the client serves itself from a cached write delegation via the can_open_delegated() path in nfs4_try_open_cached(). The mask is derived from O_ACCMODE alone, so an open(O_RDONLY | O_TRUNC) against a file the caller cannot write requests only MAY_READ and passes the local check. The OPEN is then satisfied locally and the truncation is issued to the server as a SETATTR(size=0) over the delegation stateid, which the server accepts under standard write-delegation semantics. POSIX requires that this open fail with EACCES. Include MAY_WRITE in the mask whenever O_TRUNC is set so the local check matches the access the server would have enforced.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: exfat: bound uniname advance in exfat_find_dir_entry() In exfat_find_dir_entry(), each TYPE_EXTEND (file name) entry advances the output pointer by a fixed amount while the loop guard only tracks the accumulated name length: if (++order == 2) uniname = p_uniname->name; else uniname += EXFAT_FILE_NAME_LEN; len = exfat_extract_uni_name(ep, entry_uniname); name_len += len; unichar = *(uniname+len); *(uniname+len) = 0x0; uniname grows by EXFAT_FILE_NAME_LEN (15) per name entry, but name_len grows only by the actual extracted length, which is shorter when a name fragment contains an early NUL. The only guard is `name_len >= MAX_NAME_LENGTH`, so a crafted directory with many short name fragments lets uniname run far past the p_uniname->name[MAX_NAME_LENGTH + 3] buffer while name_len stays small, causing an out-of-bounds read and write at *(uniname+len). The sibling extractor exfat_get_uniname_from_ext_entry() already stops on a short fragment (the lockstep `len != EXFAT_FILE_NAME_LEN` guard added in commit d42334578eba ("exfat: check if filename entries exceeds max filename length")); exfat_find_dir_entry() never got the equivalent. Track the per-entry write offset as a count and reject a fragment once the offset, or the offset plus the extracted length, would exceed MAX_NAME_LENGTH, before forming the output pointer.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: iommufd: Use sizeof(*hdr) instead of sizeof(hdr) in veventq read The bound-check in iommufd_veventq_fops_read() for the normal vEVENT path uses sizeof(hdr) where the surrounding code uses sizeof(*hdr): if (!vevent_for_lost_events_header(cur) && sizeof(hdr) + cur->data_len > count - done) { hdr is declared as struct iommufd_vevent_header *, so sizeof(hdr) evaluates to the size of the pointer. Surrounding code uses sizeof(*hdr) consistently: if (done >= count || sizeof(*hdr) > count - done) { ... if (copy_to_user(buf + done, hdr, sizeof(*hdr))) { ... done += sizeof(*hdr); struct iommufd_vevent_header is currently 8 bytes (two __u32 fields, flags and sequence), so on 64-bit (sizeof(void *) == 8) the two expressions happen to be equal and the check works as intended. On 32-bit (sizeof(void *) == 4) the check under-counts the header by 4 bytes: a vEVENT whose data_len causes 8 + cur->data_len to exceed count - done while 4 + cur->data_len does not will pass the check, then the loop will copy_to_user 8 bytes of header followed by data_len bytes of payload, writing past the user-supplied buffer. It is also a latent bug for any future expansion of struct iommufd_vevent_header beyond sizeof(void *) on 64-bit; the check should not depend on the type happening to match the host pointer width. Use sizeof(*hdr) to match the rest of the function and the actual amount that will be copied.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Bound used_lrs when flushing the pKVM hyp vCPU flush_hyp_vcpu() copies the host vGIC state into the hyp's private vCPU on every run. The vGIC list register save and restore use used_lrs as their loop bound and expect it to stay within the number of implemented list registers. While this is generally the case, flush_hyp_vcpu() copies vgic_v3 verbatim and does not enforce this, so a value provided by the host is used at EL2 to index vgic_lr[] and access ICH_LR<n>_EL2 (host -> EL2). Fix by clamping used_lrs to the number of implemented list registers after the copy, as the trusted path already does in vgic_flush_lr_state(). The number of implemented list registers is constant after init, so it is replicated once from kvm_vgic_global_state.nr_lr into hyp_gicv3_nr_lr rather than read on every entry.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Clear __hyp_running_vcpu when flushing the pKVM hyp vCPU flush_hyp_vcpu() copies the host vCPU context into the hyp's private vCPU on every run. ctxt_to_vcpu() expects a guest context to have a NULL __hyp_running_vcpu, which is only ever set on the host context, so that it resolves the vCPU via container_of(). While this is generally the case, flush_hyp_vcpu() copies the context verbatim and does not enforce this, so a value provided by the host is dereferenced at EL2 (host -> EL2). Fix by clearing __hyp_running_vcpu after the copy.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Ensure vendor's exit handler runs before fastpath userspace exits Move the handling of fastpath userspace exits into vendor code to ensure KVM runs vendor specific operations that need to run before userspace gains control of the vCPU. E.g. for VMX (and soon to be for SVM as well), KVM needs to flush the PML buffer prior to exiting to userspace, otherwise any memory written by the final KVM_RUN might never be flagged as dirty. Note, waiting to snapshot CR0 and CR3 until svm_handle_exit() is flawed in general, as that risks consuming stale state in a fastpath handler. That will be addressed in a future change.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: KVM: guest_memfd: Treat memslot binding offset+size as unsigned values When binding a memslot to a guest_memfd file, treat the offset and size as unsigned values to fix a bug where the sum of the two can result in a false negative when checking for overflow against the size of the file. Passing unsigned values also avoids relying on somewhat obscure checks in other flows for safety, and tracks the offset and size as they are intended to be tracked, as unsigned values. On 64-bit kernels, the number of pages a memslot contains and thus the size (and offset) of its guest_memfd binding are unsigned 64-bit values. Taking the offset+size as an loff_t instead of a uoff_t inadvertently converts the unsigned value to a signed value if the offset and/or size is massive. Locally storing the offset and size as signed values is benign in and of itself (though even that is *extremely* difficult to discern), but operating on their sum is not. For the offset, KVM explicitly checks against a negative value, which might seem like a bug as KVM could incorrectly reject a legitimate binding, but that's not actually the case as KVM_CREATE_GUEST_MEMFD takes a signed value for its size, i.e. a would-be-negative offset is also greater than the maximum possible size of any guest_memfd file. Regarding the size, while KVM lacks an explicit check for a negative value, i.e. seemingly has a flawed overflow check, KVM restricts the number of pages in a single memslot to the largest positive signed 32-bit value: if (id < KVM_USER_MEM_SLOTS && (mem->memory_size >> PAGE_SHIFT) > KVM_MEM_MAX_NR_PAGES) return -EINVAL; and so that maximum "size" will ever be is 0x7fffffff000. The sum of the two is, however, problematic. While the size is restricted by KVM's memslot logic, the offset is not, i.e. the offset is completely unchecked until the "offset + size > i_size_read(inode)" check. If the offset is the (nearly) largest possible _positive_ value, then adding size to the offset can result in a signed, negative 64-bit value. When compared against the size of the file (guaranteed to be positive), the negative sum is always smaller, and KVM incorrectly allows the absurd offset. Opportunistically add missing includes in kvm_mm.h (instead of relying on its parents).

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: svcrdma: wake sq waiters when the transport closes Threads parked in svc_rdma_sq_wait() on sc_sq_ticket_wait or sc_send_wait can hang indefinitely in TASK_UNINTERRUPTIBLE state across transport teardown, pinning svc_xprt references and blocking svc_rdma_free(). The close path sets XPT_CLOSE before invoking xpo_detach and both wait_event predicates include an XPT_CLOSE term, but the predicates are re-evaluated only on wakeup. sc_sq_ticket_wait has no completion-driven wake path; it is advanced solely by the chained ticket handoff inside svc_rdma_sq_wait() itself. Without an explicit wake at close, parked threads never observe XPT_CLOSE, hold their svc_xprt_get reference forever, and svc_rdma_free() blocks on xpt_ref dropping to zero. Two close entry points reach this transport. Local teardown runs svc_rdma_detach() from svc_handle_xprt() -> svc_delete_xprt() -> xpo_detach() on a worker thread. A remote disconnect arrives at svc_rdma_cma_handler(), which calls svc_xprt_deferred_close(): that sets XPT_CLOSE and enqueues the transport but does not access either RDMA waitqueue, so a worker already parked in svc_rdma_sq_wait() never re-evaluates its predicate. With every worker parked on this transport, no thread is available to run the local teardown either, and the wake site there is unreachable. Introduce svc_rdma_xprt_deferred_close(), a thin svcrdma wrapper that calls svc_xprt_deferred_close() and then wakes both sc_sq_ticket_wait and sc_send_wait. Convert the svcrdma producers that called svc_xprt_deferred_close() directly: svc_rdma_cma_handler(), qp_event_handler(), svc_rdma_post_send_err(), svc_rdma_wc_send(), the sendto drop path, the rw completion error paths, and the recvfrom flush and read-list error paths. Wake both waitqueues from svc_rdma_detach() as well. The synchronous svc_xprt_close() path (backchannel ENOTCONN, device removal via svc_rdma_xprt_done) reaches detach without flowing through svc_xprt_deferred_close() and therefore does not invoke the new helper. [ cel: add svc_rdma_xprt_deferred_close() to complete the fix ]

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region() afu_ioctl_dma_map() accepts a 64-bit length from userspace via DFL_FPGA_PORT_DMA_MAP ioctl without an upper bound check. The value is passed to afu_dma_pin_pages() where npages is derived as length >> PAGE_SHIFT and passed to pin_user_pages_fast() which takes int nr_pages, causing implicit truncation if length is very large. Validate map.length at the ioctl entry point before calling afu_dma_map_region(), rejecting values whose page count exceeds INT_MAX.

Linux · Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP · Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP · Siemens SIPLUS S7-1500 CPU 1518-4 PN/DP MFP

In the Linux kernel, the following vulnerability has been resolved: i2c: core: fix adapter deregistration race Adapters can be looked up by their id using i2c_get_adapter() which takes a reference to the embedded struct device. Remove the adapter from the IDR before tearing it down during deregistration (and on registration failure) to make sure its resources are not accessed after having been freed (e.g. the device name).

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count rmi_f3a_initialize() takes the GPIO count from the device query register (f3a->gpio_count = buf & RMI_F3A_GPIO_COUNT, range 0..127). rmi_f3a_map_gpios() then allocates gpio_key_map with min(gpio_count, TRACKSTICK_RANGE_END) == at most 6 entries, but rmi_f3a_attention() iterates the full gpio_count and dereferences gpio_key_map[i], and input->keycodemax is set to the full gpio_count while input->keycode points at the 6-entry allocation. A device that reports gpio_count > 6 therefore causes an out-of-bounds read of gpio_key_map[] on every attention interrupt, and out-of-bounds accesses through the input core's default keymap ioctls: EVIOCGKEYCODE reads past the buffer (leaking adjacent slab memory to user space) and EVIOCSKEYCODE writes a caller-controlled value past it, for any process able to open the evdev node, since input_default_getkeycode() and input_default_setkeycode() only bound the index against keycodemax. Size the keymap for the full gpio_count. The mapping loop is unchanged: it still assigns only the first min(gpio_count, TRACKSTICK_RANGE_END) entries; the remaining slots stay KEY_RESERVED (devm_kcalloc zero-fills) and are skipped when reporting.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED count rmi_f30_map_gpios() allocates gpioled_key_map with min(gpioled_count, TRACKSTICK_RANGE_END) == at most 6 entries, but rmi_f30_attention() iterates the full f30->gpioled_count (device query register, range 0..31) and dereferences gpioled_key_map[i], and input->keycodemax is set to the full gpioled_count while input->keycode points at the 6-entry allocation. A device that reports gpioled_count > 6 with GPIO support enabled therefore causes an out-of-bounds read on the attention interrupt and out-of-bounds read/write through the EVIOCGKEYCODE/EVIOCSKEYCODE ioctls, which bound the index only against keycodemax. This is the same defect as the F3A handler, which was copied from F30. Size the keymap for the full gpioled_count; the mapping loop still assigns only the first min(gpioled_count, TRACKSTICK_RANGE_END) entries.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: Input: goodix - clamp the device-reported contact count goodix_ts_read_input_report() copies the number of touch points reported by the device into an on-stack buffer u8 point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS]; which is sized for at most GOODIX_MAX_CONTACTS (10) contacts. The only runtime check bounds the per-interrupt count against ts->max_touch_num, but that value is taken verbatim from a 4-bit field of the device configuration block and is never clamped: ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f; The nibble can be 0..15, so a malfunctioning, malicious or counterfeit controller (or an attacker tampering with the I2C bus) can advertise up to 15 contacts. goodix_ts_read_input_report() then accepts a touch_num of up to 15 and the second goodix_i2c_read() writes ts->contact_size * (touch_num - 1) bytes past the one-contact header into point_data - up to 30 bytes (45 with the 9-byte report format) beyond the 92-byte buffer: a stack out-of-bounds write. Clamp max_touch_num to GOODIX_MAX_CONTACTS, the number of contacts point_data[] is sized for, when reading it from the configuration.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: Input: iforce - bound the device-reported force-feedback effect index iforce_process_packet() handles a status report (packet id 0x02) by taking a force-feedback effect index straight from the device wire and using it to address the per-effect state array: i = data[1] & 0x7f; if (data[1] & 0x80) { if (!test_and_set_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) ... } else if (test_and_clear_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) { ... } The index is masked only with 0x7f, so it ranges 0..127, but core_effects[] holds only IFORCE_EFFECTS_MAX (32) entries. For an index of 32..127 the test_and_set_bit()/test_and_clear_bit() is an out-of-bounds single-bit read-modify-write past the array. core_effects[] is the second-to-last member of struct iforce, so the write lands in the trailing members and beyond the embedding kzalloc()'d iforce_serio / iforce_usb object. data[1] is unvalidated device payload on both transports (the USB interrupt endpoint and serio), and the status path is not gated on force feedback being present, so a malicious or counterfeit device can set or clear a bit at an attacker-chosen offset past the object. Reject an out-of-range index instead of indexing with it. Bound against the array dimension IFORCE_EFFECTS_MAX rather than dev->ff->max_effects so the check guarantees memory safety regardless of how many effects the device registered. A legitimate "effect started/stopped" status always carries an index below IFORCE_EFFECTS_MAX, so well-formed devices are unaffected; the neighbouring mark_core_as_ready() loop is already bounded and is left untouched.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: Input: mms114 - fix touch indexing for MMS134S and MMS136 The MMS134S and MMS136 touch controllers have an event size of 6 bytes rather than 8 bytes. When __mms114_read_reg() reads the touch data packet from the device into the touch buffer, the events are packed tightly at 6-byte intervals. However, the driver iterates through the events using standard C array indexing (touch[index]), where each element is sizeof(struct mms114_touch) (8 bytes) apart. As a result, any touch events beyond the first one are read from incorrect offsets and parsed improperly. Fix this by explicitly calculating the byte offset for each touch event based on the device's specific event size.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: Input: touchwin - reset the packet index on every complete packet tw_interrupt() accumulates each non-zero serial byte into a fixed three-byte buffer with a running index that is only reset once a full packet has been received *and* the device's two Y bytes agree: tw->data[tw->idx++] = data; if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) { ... tw->idx = 0; } The reset is gated on tw->data[1] == tw->data[2], a value the device controls. A malicious, malfunctioning or counterfeit Touchwindow peripheral can stream non-zero bytes whose 2nd and 3rd bytes differ: the index reaches TW_LENGTH without the equality holding, is never reset, and keeps growing, so tw->data[tw->idx++] walks off the end of the three-byte array and the rest of the heap-allocated struct tw, one attacker-chosen byte at a time -- an unbounded, device-driven heap out-of-bounds write. Reset the index on every completed packet and report an event only when the two Y bytes match, like the other serio touchscreen drivers do.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: Input: mms114 - reject an oversized device packet size mms114_interrupt() reads a packet of touch data from the device into a fixed-size on-stack buffer struct mms114_touch touch[MMS114_MAX_TOUCH]; which holds MMS114_MAX_TOUCH (10) events of MMS114_EVENT_SIZE (8) bytes, i.e. 80 bytes. The length of the I2C read into it is taken verbatim from the device: packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE); if (packet_size <= 0) goto out; ... error = __mms114_read_reg(data, MMS114_INFORMATION, packet_size, (u8 *)touch); packet_size is a single device register byte (0x0F) and the only check is the lower bound packet_size <= 0; it is never bounded against the size of touch[]. A malfunctioning, malicious or counterfeit controller (or an attacker tampering with the I2C bus) can report a packet_size of up to 255, so __mms114_read_reg() writes up to 175 bytes past the end of touch[] on the IRQ-thread stack: a stack out-of-bounds write that can overwrite the stack canary, saved registers and the return address. A well-formed device never reports more than the buffer holds, so reject an oversized packet and drop the report, consistent with the handler's other error paths, rather than reading past the buffer.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: fuse: re-lock request before returning from fuse_ref_folio() fuse_ref_folio() unlocks the request but does not re-lock it before returning. fuse_chan_abort() can end the request and the async end callback (eg fuse_writepage_free()) can free the args while the subsequent copy chain logic after fuse_ref_folio() accesses them, leading to use-after-free issues. Fix this by locking the request in fuse_ref_folio() before returning.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: fuse: clear intr_entry in fuse_resend and fuse_remove_pending_req When fuse_resend() moves a request from fpq->processing back to fiq->pending, it sets FR_PENDING and clears FR_SENT but does not remove the requests intr_entry from fiq->interrupts. If the request had FR_INTERRUPTED set from a prior signal, intr_entry remains dangling on fiq->interrupts. When the requesting task then receives a fatal signal, fuse_remove_pending_req() sees FR_PENDING=1, removes the request from fiq->pending and frees it via the refcount path, also without cleaning intr_entry. The stale intr_entry causes use-after-free when fuse_read_interrupt() iterates fiq->interrupts: - list_del_init(&req->intr_entry) -> UAF write on freed slab - req->in.h.unique -> UAF read, data leaked to userspace Remove intr_entry from fiq->interrupts in fuse_resend() for interrupted requests before they are placed back on fiq->pending. Add a WARN_ON if the intr_entry is not empty on request destruction.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: fuse-uring: Avoid use-after-free in fuse_uring_async_stop_queues fuse_uring_async_stop_queues() might run when the last reference on ring->queue_refs was already dropped. In order to avoid an early destruction a reference on struct fuse_conn is now taken before starting fuse_uring_async_stop_queues() and that reference is only released when that delayed work queue terminates.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: fuse-uring: Avoid queue->stopped races and set/read that value under lock There are several readers of queue->stopped that check the value under lock, but fuse_uring_commit_fetch() did not and actually the value was not set under the lock in fuse_uring_abort_end_requests() either. Especially in fuse_uring_commit_fetch it is important to check under a lock, because due to races 'struct fuse_req' might be freed with fuse_request_end, but another thread/cpu might already do teardown work.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: fuse-uring: make a fuse_req on SQE commit only findable after memcpy Bad userspace might try to trick us and send commit SQEs request unique / commit-id of requests that are not even send to fuse-server (io_uring_cmd_done() not called) yet. fuse_uring_commit_fetch() ends the fuse request when the ring entry has a wrong state, but that could have caused a use-after-free with the memcpy operations in fuse_uring_send_in_task(). In order to avoid such races the call of fuse_uring_add_to_pq() is moved after the copy operations and just before completing the io-uring request - malicious userspace cannot find the request anymore until all prepration work in fuse-client/kernel is completed. This also moves fuse_uring_add_to_pq() a bit up in the code to avoid a forward declaration. Also not with a preparation commit, to make it easier to back port to older kernels.