Semaine du 13 juillet au 19 juillet 2026

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: idpf: fix read_dev_clk_lock spinlock init in idpf_ptp_init() In idpf_ptp_init(), read_dev_clk_lock is initialized after ptp_schedule_worker() had already been called (and after idpf_ptp_settime64() could reach the lock). The PTP aux worker fires immediately upon scheduling and can call into idpf_ptp_read_src_clk_reg_direct(), which takes spin_lock(&ptp->read_dev_clk_lock) on an uninitialized lock, triggering the lockdep "non-static key" warning: [12973.796587] idpf 0000:83:00.0: Device HW Reset initiated [12974.094507] INFO: trying to register non-static key. ... [12974.097208] Call Trace: [12974.097213] <TASK> [12974.097218] dump_stack_lvl+0x93/0xe0 [12974.097234] register_lock_class+0x4c4/0x4e0 [12974.097249] ? __lock_acquire+0x427/0x2290 [12974.097259] __lock_acquire+0x98/0x2290 [12974.097272] lock_acquire+0xc6/0x310 [12974.097281] ? idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf] [12974.097311] ? lockdep_hardirqs_on_prepare+0xde/0x190 [12974.097318] ? finish_task_switch.isra.0+0xd2/0x350 [12974.097330] ? __pfx_ptp_aux_kworker+0x10/0x10 [ptp] [12974.097343] _raw_spin_lock+0x30/0x40 [12974.097353] ? idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf] [12974.097373] idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf] [12974.097391] ? kthread_worker_fn+0x88/0x3d0 [12974.097404] ? kthread_worker_fn+0x4e/0x3d0 [12974.097411] idpf_ptp_update_cached_phctime+0x26/0x120 [idpf] [12974.097428] ? _raw_spin_unlock_irq+0x28/0x50 [12974.097436] idpf_ptp_do_aux_work+0x15/0x20 [idpf] [12974.097454] ptp_aux_kworker+0x20/0x40 [ptp] [12974.097464] kthread_worker_fn+0xd5/0x3d0 [12974.097474] ? __pfx_kthread_worker_fn+0x10/0x10 [12974.097482] kthread+0xf4/0x130 [12974.097489] ? __pfx_kthread+0x10/0x10 [12974.097498] ret_from_fork+0x32c/0x410 [12974.097512] ? __pfx_kthread+0x10/0x10 [12974.097519] ret_from_fork_asm+0x1a/0x30 [12974.097540] </TASK> Move the call to spin_lock_init() up a bit to make sure read_dev_clk_lock is not touched before it's been initialized.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix potential for tearing in ->remote_i_size and ->zero_point Fix potential tearing in using ->remote_i_size and ->zero_point by copying i_size_read() and i_size_write() and using the same seqcount as for i_size. We need to make sure that netfslib and the filesystems that use it always hold i_lock whilst updating any of the sizes to prevent i_size_seqcount from getting corrupted.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_inner: release local_lock before re-enabling softirqs Quoting sashiko: In the error path, local_bh_enable() is called before local_unlock_nested_bh().

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ksmbd: close durable scavenger races against m_fp_list lookups ksmbd_durable_scavenger() has two related races against any walker that iterates f_ci->m_fp_list, including ksmbd_lookup_fd_inode() (used by ksmbd_vfs_rename) and the share-mode checks in fs/smb/server/smb_common.c. (1) fp->node list-head reuse. Durable-preserved handles can remain linked on f_ci->m_fp_list after session teardown so share-mode checks still see them while the handle is reconnectable. The scavenger collected expired handles by adding fp->node to a local scavenger_list after removing them from the global durable idr. Because fp->node is the same list_head used by m_fp_list, list_add(&fp->node, &scavenger_list) overwrites the m_fp_list links and corrupts both lists. CONFIG_DEBUG_LIST can report this on the share-mode walk path. (2) Refcount race against m_fp_list walkers. The scavenger qualifies an expired durable handle with atomic_read(&fp->refcount) > 1 and fp->conn under global_ft.lock, removes fp from global_ft, then drops global_ft.lock before unlinking fp from m_fp_list and freeing it. During that gap fp is still linked on m_fp_list with f_state == FP_INITED. ksmbd_lookup_fd_inode() under m_lock read calls ksmbd_fp_get() (atomic_inc_not_zero on refcount that is still 1) and takes a live reference; the scavenger then unlinks and frees fp while the holder owns a reference, leading to UAF on the holder's subsequent ksmbd_fd_put() and on any field reads performed by a concurrent share-mode walker that iterates m_fp_list without taking ksmbd_fp_get() (smb_check_perm_dleases-like paths). Fix both: * Stop reusing fp->node as a scavenger-private list node. Remove one expired handle from global_ft under global_ft.lock, take an explicit transient reference, drop the lock, unlink fp->node from m_fp_list under f_ci->m_lock, then drop both the durable lifetime and transient references with atomic_sub_and_test(2, &fp->refcount). If the scavenger is the last putter the close runs there; otherwise an in-flight holder that already raced through the m_fp_list lookup owns the final close via its ksmbd_fd_put() path. The one-at-a-time disposal can rescan the durable idr when multiple handles expire in the same pass, but durable scavenging is a background expiration path and the final full scan recomputes min_timeout before the next wait. * Clear fp->persistent_id inside __ksmbd_remove_durable_fd() right after idr_remove(), so a delayed final close from a holder that snatched fp does not re-issue idr_remove() on a persistent id that idr_alloc_cyclic() in ksmbd_open_durable_fd() may have already handed out to a brand-new durable handle. * Bypass the per-conn open_files_count decrement in __put_fd_final() when fp is detached from any session table (fp->conn cleared by session_fd_check() at durable preserve -- paired with the volatile_id clear at unpublish, so checking fp->conn alone is sufficient). The walker that owns the final close runs from an unrelated work->conn whose stats.open_files_count never tracked this durable fp; without this guard the holder would underflow that unrelated counter. The two races are folded into one patch because patch (1) alone cleans up the corrupted list but leaves a deterministic UAF window for m_fp_list walkers that the transient-reference and persistent_id discipline in (2) close; bisecting onto an intermediate state would land on a UAF that pre-patch chaos merely made less reproducible. Validation: * CONFIG_DEBUG_LIST coverage for the list_head reuse path. * KASAN-enabled direct SMB2 durable-handle coverage that exercised ksmbd_durable_scavenger() and non-NULL ksmbd_lookup_fd_inode() returns while durable handles expired under concurrent rename lookups, with no KASAN, UAF, list-corruption, ODEBUG, or WARNING reports. ---truncated---

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: smb: client: protect tc_count increment in smb2_find_smb_sess_tcon_unlocked() Commit 96c4af418586 ("cifs: Fix locking usage for tcon fields") refactored cifs code to change cifs_tcp_ses_lock for tc_lock around tc_count changes. There was missing lock around tc_count increment inside smb2_find_smb_sess_tcon_unlocked().

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ipv6: ioam: refresh hdr pointer before ioam6_event() Reported by Sashiko: In ipv6_hop_ioam(), the hdr pointer is initialized to point into the skb's linear data buffer. Later, the code calls skb_ensure_writable(), which might reallocate the buffer: if (skb_ensure_writable(skb, optoff + 2 + hdr->opt_len)) goto drop; /* Trace pointer may have changed */ trace = (struct ioam6_trace_hdr *)(skb_network_header(skb) + optoff + sizeof(*hdr)); ioam6_fill_trace_data(skb, ns, trace, true); ioam6_event(IOAM6_EVENT_TRACE, dev_net(skb->dev), GFP_ATOMIC, (void *)trace, hdr->opt_len - 2); If the skb is cloned or lacks sufficient linear headroom, skb_ensure_writable() will invoke pskb_expand_head(), which reallocates the skb's data buffer and frees the old one, invalidating pointers to it. While the code recalculates the trace pointer immediately after the call to skb_ensure_writable(), it fails to recalculate the hdr pointer. This patch fixes the above by recalculating the hdr pointer before passing hdr->opt_len to ioam6_event(), so that we avoid any UaF.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: keep RBUF EEE/PM disabled Setting RBUF_EEE_EN | RBUF_PM_EN in RBUF_ENERGY_CTRL breaks the RX path on GENET hardware once MAC EEE becomes active. RX traffic stops flowing while the link stays up and the usual descriptor/RX error counters remain quiet. In that state the MAC still accepts frames (rbuf_ovflow_cnt keeps climbing) but RBUF no longer forwards them to DMA, so rx_packets is no longer incremented at the netdev level. On some boards the corruption ends up as a paging fault in skb_release_data via bcmgenet_rx_poll on an LPI exit. Reproduced on Pi 4B (BCM2711 + BCM54213PE) and confirmed by Florian Fainelli on an internal Broadcom 4908-family board with the same crash signature. RBUF_PM_EN is not publicly documented. This shows up more often now that phy_support_eee() enables EEE by default, but it also affects older kernels as soon as TX LPI is turned on via ethtool, so it is not specific to recent changes. Always clear RBUF_EEE_EN | RBUF_PM_EN in bcmgenet_eee_enable_set so the bits stay off across resets. UMAC and TBUF setup is left alone so TX-side EEE keeps working.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix use-after-free in mlx5e_tx_reporter_timeout_recover mlx5e_tx_reporter_timeout_recover() accesses sq->netdev after mlx5e_safe_reopen_channels() has torn down and freed the channel (and its embedded SQs). Replace the three sq->netdev references with priv->netdev which is safe because priv outlives channel teardown. The netdev_err() call already used priv->netdev for this reason; make the trylock/unlock and health_channel_eq_recover calls consistent. This fixes the following KASAN splat: BUG: KASAN: use-after-free in mlx5e_tx_reporter_timeout_recover+0x1dd/0x360 [mlx5_core] Read of size 8 at addr ffff889860ed0b28 by task kworker/u113:2/5277 Call Trace: mlx5e_tx_reporter_timeout_recover+0x1dd/0x360 [mlx5_core] devlink_health_reporter_recover+0xa2/0x150 devlink_health_report+0x254/0x7c0 mlx5e_reporter_tx_timeout+0x297/0x380 [mlx5_core] mlx5e_tx_timeout_work+0x109/0x170 [mlx5_core] process_one_work+0x677/0xf20 worker_thread+0x51f/0xd90 kthread+0x3a5/0x810 ret_from_fork+0x208/0x400 ret_from_fork_asm+0x1a/0x30

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ixgbevf: fix use-after-free in VEPA multicast source pruning ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's own address (VEPA multicast workaround) by freeing the skb and continuing to the next descriptor: dev_kfree_skb_irq(skb); continue; The skb pointer is declared outside the while loop and persists across iterations. Because the continue skips the "skb = NULL" reset at the bottom of the loop, the next iteration enters the "else if (skb)" path and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing skb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context. The sibling driver iavf already handles this correctly by nulling the pointer before continuing. Apply the same pattern here. I do not have ixgbevf hardware; the bug was found by static analysis (scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-tool corroboration with the highest score in the scan). The UAF was confirmed under KASAN by loading a test module that reproduces the exact code pattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags): BUG: KASAN: slab-use-after-free in ixgbevf_uaf_test_init+0x100/0x1000 Read of size 8 at addr 000000006163ae78 by task insmod/30 freed 208-byte region [000000006163adc0, 000000006163ae90) QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VF driver does not include the VEPA source pruning path, so a full end-to-end reproduction with emulated hardware was not possible.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-its: Reject restored DTE with out-of-range num_eventid_bits Userspace can restore an ITS Device Table Entry whose Size field encodes more EventID bits than the virtual ITS supports. The live MAPD path rejects that state, but vgic_its_restore_dte() accepts it and stores the out-of-range value in dev->num_eventid_bits. Reject restored DTEs with num_eventid_bits > VITS_TYPER_IDBITS before allocating the device. This mirrors the MAPD check and prevents the restored state from reaching vgic_its_restore_itt(), where the unchecked value can be converted into an oversized scan_its_table() range.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Reject MPA FPDU length underflow before signed receive math A malicious connected siw peer can send an iWARP FPDU whose MPA length field (c_hdr->mpa_len, 16 bit big-endian, peer-controlled) is smaller than the fixed DDP/RDMAP header for the announced opcode. Soft-iWARP parses the full header in siw_get_hdr() based on iwarp_pktinfo[opcode] .hdr_len, but never compares mpa_len against that header length. siw_tcp_rx_data() then derives srx->fpdu_part_rem = be16_to_cpu(mpa_len) - fpdu_part_rcvd + MPA_HDR_SIZE; where fpdu_part_rcvd equals iwarp_pktinfo[opcode].hdr_len at this point. For a tagged WRITE (hdr_len 16, MPA_HDR_SIZE 2) the smallest on-wire mpa_len of 0 yields fpdu_part_rem = -14, and any mpa_len below hdr_len - MPA_HDR_SIZE underflows to a negative int. The signed value then flows into siw_proc_write()/siw_proc_rresp() as bytes = min(srx->fpdu_part_rem, srx->skb_new); is handed to siw_check_mem() as an int len (whose interval check addr + len > mem->va + mem->len is satisfied for a valid base when len is negative), and reaches siw_rx_data() -> siw_rx_kva() / siw_rx_umem() -> skb_copy_bits() as a signed copy length. The header copy branch in skb_copy_bits() promotes that to size_t, producing a multi-gigabyte read. KASAN under a KUnit harness that drives the real kernel TCP receive path -- a loopback AF_INET socketpair, the malformed FPDU written via kernel_sendmsg, sk_data_ready firing in softirq, tcp_read_sock dispatching to siw_tcp_rx_data -- reports: BUG: KASAN: use-after-free in skb_copy_bits+0x284/0x480 Read of size 4294967295 at addr ffff888... Call Trace: skb_copy_bits siw_rx_kva siw_rx_data siw_check_mem siw_proc_write siw_tcp_rx_data __tcp_read_sock siw_qp_llp_data_ready tcp_data_ready tcp_data_queue Add the missing invariant at the earliest point where the peer header is fully assembled. iwarp_pktinfo[*].hdr_len - MPA_HDR_SIZE is exactly the value the siw transmitter uses as the minimum mpa_len for each opcode (drivers/infiniband/sw/siw/siw_qp.c:33), so this matches the protocol contract. Out-of-range FPDUs terminate the connection with TERM_ERROR_LAYER_LLP / LLP_ETYPE_MPA / LLP_ECODE_FPDU_START -- which is RFC 5044 Section 8 error code 3 ("Marker and ULPDU Length fields do not agree on the start of an FPDU"), the correct framing-error class for this inconsistency.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: fix TOCTOU race for reported vlans The local TT based TVLV is generated by first checking the number of VLANs which have at least one TT entry. A new buffer with the correct size for the VLANs is then allocated. Only then, the list of VLANs s used to fill the VLAN entries in the buffer. During this time, the meshif_vlan_list_lock is held. But the actual number of TT entries of each VLAN can still increase during this time - just not the number of VLANs in the list. But the prefilter used in the buffer size calculation might still cause an increase of the number of VLANs which need to be stored. Simply because a VLAN might now suddenly have at least one entry when it had none in the pre-alloc check - and then needs to occupy space which was not allocated. It is better to overestimate the buffer size at the beginning and then fill the buffer only with the VLANs which are not empty.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: fix negative last_changeset_len batadv_piv_tt::last_changeset_len len was declared as s16, but the field is never intended to hold a negative value. When a value greater than 32767 is assigned, it wraps to a negative signed integer. In batadv_send_my_tt_response(), last_changeset_len is temporarily widened to s32. The incorrectly negative s16 value propagates into the s32, causing batadv_tt_prepare_tvlv_local_data() to allocate a full sized buffer but populates only a small portion of it with the collected changeset. All remaining bits are kept uninitialized. Using an u16 avoids this type confusion and ensures that no (negative) sign extension is performed in batadv_send_my_tt_response().

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Snapshot notifier callbacks under lock Both notification handlers currently look up a notifier callback under notify_lock, drop the lock, and then dereference the returned notifier entry. A concurrent unregister can delete and free that entry in the gap, leaving the handler to dereference stale memory. Copy the callback pointer and callback data while notify_lock is still held and invoke the callback only after the lock is dropped. This keeps the existing callback execution model while removing the use-after-free window in both the framework and non-framework notification paths.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix cancellation of a DIO and single read subrequests When the preparation of a new subrequest for a read fails, if the subrequest has already been added to the stream->subrequests list, it can't simply be put and abandoned as the collector may see it. Also, if it hasn't been queued yet, it has two outstanding refs that both need to be put. Both DIO read and single-read dispatch fail at this; further, both differ in the order they do things to the way buffered read works. Fix cancellation of both DIO-read and single-read subrequests that failed preparation by the following steps: (1) Harmonise all three reads (buffered, dio, single) to queue the subreq before prepping it. (2) Make all three call netfs_queue_read() to do the queuing. (3) Set NETFS_RREQ_ALL_QUEUED independently of the queuing as we don't know the length of the subreq at this point. (4) In all cases, set the error and NETFS_SREQ_FAILED flag on the subreq and then call netfs_read_subreq_terminated() to deal with it. This will pass responsibility off to the collector for dealing with it.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix missing locking around retry adding new subreqs Fix netfs_retry_read_subrequests() and netfs_retry_write_stream() to take the appropriate lock when adding extra subrequests into stream->subrequests.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix missing barriers when accessing stream->subrequests locklessly The list of subrequests attached to stream->subrequests is accessed without locks by netfs_collect_read_results() and netfs_collect_write_results(), and then they access subreq->flags without taking a barrier after getting the subreq pointer from the list. Relatedly, the functions that build the list don't use any sort of write barrier when constructing the list to make sure that the NETFS_SREQ_IN_PROGRESS flag is perceived to be set first if no lock is taken. Fix this by: (1) Add a new list_add_tail_release() function that uses a release barrier to set the pointer to the new member of the list. (2) Add a new list_first_entry_or_null_acquire() function that uses an acquire barrier to read the pointer to the first member in a list (or return NULL). (3) Use list_add_tail_release() when adding a subreq to ->subrequests. (4) Use list_first_entry_or_null_acquire() when initially accessing the front of the list (when an item is removed, the pointer to the new front iterm is obtained under the same lock).

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix netfs_read_to_pagecache() to pause on subreq failure Fix netfs_read_to_pagecache() so that it pauses the generation of new subrequests if an already-issued subrequest fails.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix early put of sink folio in netfs_read_gaps() Fix netfs_read_gaps() to release the sink page it uses after waiting for the request to complete. The way the sink page is used is that an ITER_BVEC-class iterator is created that has the gaps from the target folio at either end, but has the sink page tiled over the middle so that a single read op can fill in both gaps. The bug was found by KASAN detecting a UAF on the generic/075 xfstest in the cifsd kernel thread that handles reception of data from the TCP socket: BUG: KASAN: use-after-free in _copy_to_iter+0x48a/0xa20 Write of size 885 at addr ffff888107f92000 by task cifsd/1285 CPU: 2 UID: 0 PID: 1285 Comm: cifsd Not tainted 7.0.0 #6 PREEMPT(lazy) Call Trace: dump_stack_lvl+0x5d/0x80 print_report+0x17f/0x4f1 kasan_report+0x100/0x1e0 kasan_check_range+0x10f/0x1e0 __asan_memcpy+0x3c/0x60 _copy_to_iter+0x48a/0xa20 __skb_datagram_iter+0x2c9/0x430 skb_copy_datagram_iter+0x6e/0x160 tcp_recvmsg_locked+0xce0/0x1130 tcp_recvmsg+0xeb/0x300 inet_recvmsg+0xcf/0x3a0 sock_recvmsg+0xea/0x100 cifs_readv_from_socket+0x3a6/0x4d0 [cifs] cifs_read_iter_from_socket+0xdd/0x130 [cifs] cifs_readv_receive+0xaad/0xb10 [cifs] cifs_demultiplex_thread+0x1148/0x1740 [cifs] kthread+0x1cf/0x210

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Make RX SKB per-port The SKB used to assemble packets from fragments in gmac_rx() is static local, but the Gemini has two ethernet ports, meaning there can be races between the ports on a bad day if a device is using both. Make the RX SKB a per-port variable and carry it over between invocations in the port struct instead. Zero the pointer once we call napi_gro_frags(), on error (after calling napi_free_frags()) or if the port is stopped. Zero it in some place where not strictly necessary just to emphasize what is going on. This was found by Sashiko during normal patch review.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Carry over frag counter The gmac_rx() NAPI poll function assembles packets in an SKB from a ring buffer. If the ring buffer gets completely emptied during a poll cycle, we exit gmac_rx(), but the packet is not yet completely assembled in the SKB, yet the fragment counter frag_nr is reset to zero on the next invocation. Solve this by making the RX fragment counter a part of the port struct, and carry it over between invocations. Reset the fragment counter only right after calling napi_gro_frags(), on error (after calling napi_free_frags()) or if stopping the port. Reset it in some place where not strictly necessary just to emphasize what is going on. This was found by Sashiko during normal patch review.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: net: tls: fix off-by-one in sg_chain entry count for wrapped sk_msg ring When an sk_msg scatterlist ring wraps (sg.end < sg.start), tls_push_record() chains the tail portion of the ring to the head using sg_chain(). An extra entry in the sg array is reserved for this: struct sk_msg_sg { [...] /* The extra two elements: * 1) used for chaining the front and sections when the list becomes * partitioned (e.g. end < start). The crypto APIs require the * chaining; * 2) to chain tailer SG entries after the message. */ struct scatterlist data[MAX_MSG_FRAGS + 2]; The current code uses MAX_SKB_FRAGS + 1 as the ring size: sg_chain(&msg_pl->sg.data[msg_pl->sg.start], MAX_SKB_FRAGS - msg_pl->sg.start + 1, msg_pl->sg.data); This places the chain pointer at sg_chain(data[start], (MAX_SKB_FRAGS - msg_start + 1) .. = &data[start] + (MAX_SKB_FRAGS - msg_start + 1) - 1 = data[start + (MAX_SKB_FRAGS - start + 1) - 1] = data[MAX_SKB_FRAGS] instead of the true last entry. This is likely due to a "race" of the commit under Fixes landing close to commit 031097d9e079 ("bpf: sk_msg, zap ingress queue on psock down") Convert to ARRAY_SIZE and drop the data[start] / - start (as suggested by Sabrina).

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: net: tls: prevent chain-after-chain in plain text SG Sashiko points out that if end = 0 (start != 0) the current code will create a chain link to content type right after the wrap link: This would create a chain where the wrap link points directly to another chain link. The scatterlist API sg_next iterator does not recursively resolve consecutive chain links. meaning this is illegal input to crypto. The wrapping link is unnecessary if end = 0. end is the entry after the last one used so end = 0 means there's nothing pushed after the wrap: end start i v v v [ ]...[ ][ d ][ d ][ d ][ d ][rsv for wrap] Skip the wrapping in this case. TLS 1.3 can use the "wrapping slot" for it's chaining if end = 0. This avoids the chain-after-chain. Move the wrap chaining before marking END and chaining off content type, that feels like more logical ordering to me, but should not matter from functional perspective.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: fix TSO segmentation explosion when AMSDU is disabled When the TLC notification disables AMSDU for a TID, the MLD driver sets max_tid_amsdu_len to the sentinel value 1. The TSO segmentation path in iwl_mld_tx_tso_segment() checks for zero but not for this sentinel, allowing it to reach the num_subframes calculation: num_subframes = (max_tid_amsdu_len + pad) / (subf_len + pad) = (1 + 2) / (1534 + 2) = 0 This zero propagates to iwl_tx_tso_segment() which sets: gso_size = num_subframes * mss = 0 Calling skb_gso_segment() with gso_size=0 creates over 32000 tiny segments from a single GSO skb. This floods the TX ring with ~1024 micro-frames (the rest are purged), creating a massive burst of TX completion events that can lead to memory corruption and a subsequent use-after-free in TCP's retransmit queue (refcount underflow in tcp_shifted_skb, NULL deref in tcp_rack_detect_loss). The MVM driver is immune because it checks mvmsta->amsdu_enabled before reaching the num_subframes calculation. The MLD driver has no equivalent bitmap check and relies solely on max_tid_amsdu_len, which does not catch the sentinel value. Fix this by detecting the sentinel value (max_tid_amsdu_len == 1) at the existing check and falling back to non-AMSDU TSO segmentation. Also add a WARN_ON_ONCE guard after the num_subframes division as defense-in-depth to catch any future code paths that produce zero through a different mechanism.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: igc: set tx buffer type for SMD frames Sashiko pointed out that igc_fpe_init_smd_frame() initializes igc_tx_buffer fields for an SMD skb, but does not set the buffer type: https://sashiko.dev/#/patchset/20260415025226.114115-1-kohei%40enjuk.jp Since igc_tx_buffer entries are reused, a stale XDP or XSK type can remain and make TX completion use the wrong cleanup path. Set the buffer type to IGC_TX_BUFFER_TYPE_SKB.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix TOCTOU double-fetch of hwc_msg_id from DMA buffer In mana_hwc_rx_event_handler(), resp->response.hwc_msg_id is read from DMA-coherent memory and bounds-checked, then mana_hwc_handle_resp() re-reads the same field from the same DMA buffer for test_bit() and pointer arithmetic. DMA-coherent memory is mapped uncacheable on x86 and is shared, unencrypted, in Confidential VMs (SEV-SNP/TDX), so each load goes directly to host-visible memory. A H/W can modify the value between the check and the use, bypassing the bounds validation. Fix this by reading hwc_msg_id exactly once using READ_ONCE() into a stack-local variable in mana_hwc_rx_event_handler(), and passing the validated value as a parameter to mana_hwc_handle_resp().

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs: Fix use-after-free in path file creation cleanup In the error path of rtrs_srv_create_path_files(), the sysfs root folders may already have been created and srv_path->kobj may already have been initialized. If a later step fails, the cleanup currently calls kobject_put(&srv_path->kobj) before rtrs_srv_destroy_once_sysfs_root_folders(srv_path). kobject_put() may drop the last reference to srv_path->kobj and invoke the release callback, rtrs_srv_release(), which frees srv_path. The following call to rtrs_srv_destroy_once_sysfs_root_folders(srv_path) then dereferences srv_path internally to access srv_path->srv, resulting in a use-after-free. This failure path is reached before rtrs_srv_create_path_files() returns success, so the successful-path lifetime handling is not involved. Fix this by destroying the sysfs root folders before calling kobject_put(&srv_path->kobj), so srv_path is still valid while the helper accesses it. This issue was found by a static analysis tool I am developing.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: bpf, skmsg: fix verdict sk_data_ready racing with ktls rx sk_psock_strp_data_ready() already checks tls_sw_has_ctx_rx() and defers to psock->saved_data_ready when a TLS RX context is present, avoiding a conflict with the TLS strparser's ownership of the receive queue (commit e91de6afa81c, "bpf: Fix running sk_skb program types with ktls"). sk_psock_verdict_data_ready() has no equivalent guard. When a socket is inserted into a sockmap (BPF_SK_SKB_VERDICT) before TLS RX is configured, tls_sw_strparser_arm() saves sk_psock_verdict_data_ready as rx_ctx->saved_data_ready. On data arrival: tls_data_ready -> tls_strp_data_ready -> tls_rx_msg_ready -> saved_data_ready() = sk_psock_verdict_data_ready() -> tcp_read_skb() drains sk_receive_queue via __skb_unlink() without calling tcp_eat_skb(), so copied_seq is not advanced. tls_strp_msg_load() then finds tcp_inq() >= full_len (stale), calls tcp_recv_skb() on the now-empty queue, hits WARN_ON_ONCE(!first), and returns with rx_ctx->strp.anchor.frag_list pointing at a psock-owned (potentially freed) skb. tls_decrypt_sg() subsequently walks that frag_list: use-after-free. Apply the same fix as sk_psock_strp_data_ready(): if a TLS RX context is present, call psock->saved_data_ready (sock_def_readable) to wake recv() waiters and return immediately, leaving the receive queue untouched. TLS retains sole ownership of the queue and decrypts the record normally through tls_sw_recvmsg().

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: tcp: fix stale per-CPU tcp_tw_isn leak enabling ISN prediction Blamed commit moved the TIME_WAIT-derived ISN from the skb control block to a per-CPU variable, assuming the value would always be consumed by tcp_conn_request() for the same packet that wrote it. That assumption is violated by multiple drop paths between the producer (__this_cpu_write(tcp_tw_isn, isn) in tcp_v{4,6}_rcv()) and the consumer (tcp_conn_request()): - min_ttl / min_hopcount check - xfrm policy check - tcp_inbound_hash() MD5/AO mismatch - tcp_filter() eBPF/SO_ATTACH_FILTER drop - th->syn && th->fin discard in tcp_rcv_state_process() TCP_LISTEN - psp_sk_rx_policy_check() in tcp_v{4,6}_do_rcv() - tcp_checksum_complete() in tcp_v{4,6}_do_rcv() - tcp_v{4,6}_cookie_check() returning NULL When a packet is dropped on any of these paths, tcp_tw_isn is left set. The next SYN processed on the same CPU then consumes the non zero value in tcp_conn_request(), receiving a potentially predictable ISN. This patch moves back tcp_tw_isn to skb->cb[], getting rid of the per-cpu variable. Note that tcp_v{4,6}_fill_cb() do not set it. Very litle impact on overall code size/complexity: $ scripts/bloat-o-meter -t vmlinux.old vmlinux.new add/remove: 0/0 grow/shrink: 2/1 up/down: 8/-15 (-7) Function old new delta tcp_v6_rcv 3038 3042 +4 tcp_v4_rcv 3035 3039 +4 tcp_conn_request 2938 2923 -15 Total: Before=24436060, After=24436053, chg -0.00%

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: net: mana: validate rx_req_idx to prevent out-of-bounds array access In mana_hwc_rx_event_handler(), rx_req_idx is derived from sge->address in DMA-coherent memory. In Confidential VMs (SEV-SNP/TDX), this memory is shared unencrypted and HW can modify WQE contents at any time. No bounds check exists on rx_req_idx, which can lead to an out-of-bounds access into reqs[]. Add bounds check on rx_req_idx in mana_hwc_rx_event_handler() before using it to index the reqs[] array.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix durable reconnect error path file lifetime After a durable reconnect succeeds, ksmbd_reopen_durable_fd() republishes the same ksmbd_file into the session volatile-id table. If smb2_open() then takes a later error path, cleanup first calls ksmbd_fd_put(work, fp) and then unconditionally calls ksmbd_put_durable_fd(dh_info.fp). In this case fp and dh_info.fp are the same object. The first put drops the reconnect lookup reference, but the final durable put can run __ksmbd_close_fd(NULL, fp). Because the final close is not session-aware, it can free the file object without removing the volatile-id entry that was just published into the session table. Use the session-aware put for the final reconnect drop when the reconnect had already succeeded and the error path is cleaning up the republished file. Earlier reconnect failures, before fp is assigned to dh_info.fp, keep using the durable-only put path.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: refresh tcphdr after skb_ensure_writable synproxy_tstamp_adjust() rewrites the TCP timestamp option in place and then patches the TCP checksum via inet_proto_csum_replace4() on the caller-supplied tcphdr pointer. Both ipv4_synproxy_hook() and ipv6_synproxy_hook() obtain that pointer with skb_header_pointer() before calling in, so it may either alias skb->head directly or point at the caller's on-stack _tcph buffer. Between obtaining the pointer and using it, the function calls skb_ensure_writable(skb, optend), which on a cloned or non-linear skb invokes pskb_expand_head() and frees the old skb->head. After that point the cached th is stale: caller (ipv[46]_synproxy_hook) th = skb_header_pointer(skb, ..., &_tcph) synproxy_tstamp_adjust(skb, protoff, th, ...) skb_ensure_writable(skb, optend) pskb_expand_head() /* kfree(old skb->head) */ ... inet_proto_csum_replace4(&th->check, ...) /* writes into freed head, or into the caller's stack copy leaving the on-wire checksum stale */ The option bytes are written through skb->data and are fine; only the checksum update goes through th and so lands in the wrong place. The result is either a write into freed slab memory or a packet leaving with a checksum that does not match its payload. Fix by re-deriving th from skb->data + protoff immediately after skb_ensure_writable() succeeds, so the subsequent checksum update targets the linear, writable header.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: net: hsr: fix potential OOB access in supervision frame handling Ensure the entire TLV header is linearized before access by adding sizeof(struct hsr_sup_tlv) to the pskb_may_pull() calls. Without this, a truncated frame could cause an out-of-bounds access.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: tunnels: load network headers after skb_cow() in iptunnel_pmtud_build_icmp[v6]() Sashiko found that iptunnel_pmtud_build_icmp() and iptunnel_pmtud_build_icmpv6() were caching ip_hdr() and ipv6_hdr() before an skb_cow() call which can reallocate skb->head. Fix this possible UAF by initializing the local variables after the skb_cow() call. Remove skb_reset_network_header() calls which were not needed.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: vxlan: do not reuse cached ip_hdr() value after skb_tunnel_check_pmtu() skb_tunnel_check_pmtu() can change skb->head. Reusing old_iph afer skb_tunnel_check_pmtu() can cause an UAF. Use instead ip_hdr(skb) as done in drivers/net/bareudp.c and drivers/net/geneve.c. Found by Sashiko.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: tunnels: do not assume transport header in iptunnel_pmtud_check_icmp() In some cases, iptunnel_pmtud_check_icmp() can be called while skb transport header is not set. This triggers an out-of-bound access, because (typeof(skb->transport_header))~0U is 65535. Access the icmp header based on IPv4 network header, after making sure icmp->type is present in skb linear part. Note that iptunnel_pmtud_check_icmpv6()) is fine.

Linux

In the Linux kernel, the following vulnerability has been resolved: ipv6: rpl: fix hdrlen overflow in ipv6_rpl_srh_decompress() ipv6_rpl_srh_decompress() computes: outhdr->hdrlen = (((n + 1) * sizeof(struct in6_addr)) >> 3); hdrlen is __u8. For n >= 127 the result exceeds 255 and silently truncates. With n=127 (cmpri=15, cmpre=15, pad=0, hdrlen=16): (128 * 16) >> 3 = 256, truncated to 0 as __u8 The caller in ipv6_rpl_srh_rcv() then places the compressed header at buf + ((ohdr->hdrlen + 1) << 3). With hdrlen=0 this is buf + 8, but the decompressed region occupies buf[0..2055] (8-byte header plus 128 full addresses). The compressed header overlaps the decompressed data, and ipv6_rpl_srh_compress() writes into this overlap, corrupting the routing header of the forwarded packet. The existing guard at exthdrs.c:546 checks (n + 1) > 255, which prevents n+1 from overflowing unsigned char (the segments_left field), but does not prevent the computed hdrlen from overflowing __u8. n=127 passes because 128 <= 255, yet hdrlen=256 does not fit. Tighten the bound to (n + 1) > 127. This caps n at 126, giving hdrlen = (127 * 16) >> 3 = 254, which fits in __u8. The compressed header then lands at buf + ((254 + 1) << 3) = buf + 2040, exactly past the decompressed region (buf[0..2039]). No overlap. 127 segments is well beyond any realistic RPL deployment.

Linux

In the Linux kernel, the following vulnerability has been resolved: net/handshake: hand off the pinned file reference to accept_doit handshake_req_next() removes the request from the per-net pending list and drops hn_lock before handshake_nl_accept_doit() reads req->hr_sk->sk_socket and dereferences sock->file (once in FD_PREPARE() and again in get_file()). In that window a consumer running tls_handshake_cancel() followed by sockfd_put() (svc_sock_free) or __fput_sync() (xs_reset_transport) releases sock->file. sock_release() then runs sock_orphan(), zeroing sk_socket, and frees the struct socket. The accept-side code either reads NULL through sk_socket or chases freed memory. The submit-side sock_hold() does not prevent this. sk_refcnt protects struct sock, but struct socket and sock->file are independently refcounted via the file descriptor the consumer owns. Pinning sk leaves sock and sock->file unprotected. Retarget the accept-side dereferences at req->hr_file, which was pinned at submit time, instead of req->hr_sk->sk_socket->file. Pinning on its own is not sufficient: a consumer that cancels between handshake_req_next() returning and accept_doit reaching FD_PREPARE() takes the !remove_pending() branch in handshake_req_cancel() and drops hr_file before the accept side takes its own reference. Hand off an additional file reference inside handshake_req_next(), under hn_lock, so the accept side operates on a reference that no concurrent handshake_req_cancel() can revoke. FD_PREPARE() consumes that handed-off reference, either by transferring it to the new fd in fd_publish() or by dropping it in the cleanup destructor on error; the explicit get_file() that previously balanced FD_PREPARE() is therefore redundant and goes away. Update handshake_req_cancel_test2 and _test3 to simulate the FD_PREPARE() consumption with an fput() so the kunit file-count assertions stay balanced.

Linux

In the Linux kernel, the following vulnerability has been resolved: net/handshake: Drain pending requests at net namespace exit The arguments to list_splice_init() in handshake_net_exit() are reversed. The call moves the local empty "requests" list onto hn->hn_requests, leaving the local list empty, so the subsequent drain loop runs zero iterations. Pending handshake requests that had not yet been accepted are not torn down when the net namespace is destroyed; each one keeps a reference on a socket file and on the handshake_req allocation. Pass the source and destination in the documented order (list_splice_init(list, head) moves list onto head) so the pending list is transferred to the local scratch list and drained through handshake_complete(). Fixing the splice direction exposes a list-corruption race. After the splice each req->hr_list still has non-empty link pointers, threading the stack-local scratch list rather than hn_requests. A concurrent handshake_req_cancel() -- for example, from sunrpc's TLS timeout on a kernel socket whose netns reference was not taken -- finds the request through the rhashtable, calls remove_pending(), and sees !list_empty(&req->hr_list). __remove_pending_locked() then list_del_init()s an entry off the scratch list while the drain iterates, corrupting it. The same call arriving after the drain loop has run list_del() on an entry hits LIST_POISON instead. Have remove_pending() check HANDSHAKE_F_NET_DRAINING under hn_lock and report not-found when drain is in progress. The drain has already taken ownership; handshake_complete()'s existing test_and_set on HANDSHAKE_F_REQ_COMPLETED still arbitrates between drain and cancel for who calls the consumer's hp_done. Use list_del_init() rather than list_del() in the drain so req->hr_list does not carry LIST_POISON after drain releases the entry. The DRAINING guard in remove_pending() makes cancel return false, but cancel still falls through to test_and_set_bit on HANDSHAKE_F_REQ_COMPLETED and drops the request's hr_file reference. Without another pin, if that is the last reference, sk_destruct frees the request while it is still linked on the drain loop's local list. Pin each request's hr_file under hn_lock before releasing the list, and drop that drain pin after the loop finishes with the request.

Linux

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Ignore Port I/O requests of length '0' Explicitly ignore Port I/O requests of length '0' (or count '0'), so that setting up the software scratch area (and other code) doesn't have to worry about underflowing the length, and to allow for WARNing on trying to configure the scratch area with len==0.

Linux

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Compute the correct max length of the in-GHCB scratch area When setting the length of the GHCB scratch area, and the area is in the GHCB shared buffer, set the effective length of the scratch area to the max possible size given the start of the guest-provided pointer, and the end of the shared buffer. The code was "fine" when first introduced, as KVM doesn't consult the length of the buffer when emulating MMIO, because the passed in @len always specifies the *max* size required. But for PSC requests, the incoming @len is just the minimum length (to process the header), and KVM needs to know the full size of the scratch area to avoid buffer overflows (spoiler alert). Opportunistically rename @len => @min_len to better reflect its role.

Linux

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Check PSC request indices against the actual size of the buffer When processing Page State Change (PSC) requests, validate the PSC buffer against the effective size of the scratch area, which could be less than the maximum size if the guest provided a pointer that isn't exactly at the start of the GHCB shared buffer.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo() ipv6_hop_jumbo() calls pskb_trim_rcsum(), which can change skb pointers. Let's recompute nh pointer to make sure any change won't mess things up.

Linux

In the Linux kernel, the following vulnerability has been resolved: ipv6: exthdrs: refresh nh after handling HAO option ip6_parse_tlv() caches skb_network_header(skb) in nh while walking IPv6 TLVs. ipv6_dest_hao() may call pskb_expand_head() for a cloned skb, which can move the skb head and invalidate the cached network header pointer. Refresh nh after ipv6_dest_hao() returns so any trailing padding or TLVs are parsed from the current skb head. This matches the existing pattern used in ip6_parse_tlv() after helpers that can modify skb header storage.

Linux

In the Linux kernel, the following vulnerability has been resolved: xfrm: esp: restore combined single-frag length gate The ESP out-of-place fast path appends the trailer in esp_output_head() before esp_output_tail() allocates the destination page frag. The head-side gate currently checks skb->data_len and tailen separately, but the tail code allocates a single destination frag from the combined post-trailer skb->data_len. Reject the page-frag fast path when the combined aligned length exceeds a page. Otherwise skb_page_frag_refill() may fall back to a single page while the destination sg still spans the combined skb->data_len. Restore this combined-length page gate for both IPv4 and IPv6.

Linux

In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix CRC overread and double-free in iscsit_handle_text_cmd() Two latent bugs in the Text-phase handler, both present since the original LIO integration in commit e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1"): 1) DataDigest CRC buffer overread (4 bytes past text_in). text_in is kzalloc()'d at ALIGN(payload_length, 4). rx_size is then incremented by ISCSI_CRC_LEN to make room for the received DataDigest in the iovec, but the same (now-bumped) rx_size is passed as the buffer length to iscsit_crc_buf(): if (conn->conn_ops->DataDigest) { ... rx_size += ISCSI_CRC_LEN; } ... if (conn->conn_ops->DataDigest) { data_crc = iscsit_crc_buf(text_in, rx_size, 0, NULL); iscsit_crc_buf() walks rx_size bytes of text_in with crc32c(), so when DataDigest is negotiated it reads 4 bytes past the end of the text_in allocation. KASAN reproduces this directly on the unpatched mainline tree as slab-out-of-bounds in crc32c() called from the Text PDU path. The OOB bytes feed crc32c() and are then compared against the initiator-supplied checksum, so the value does not flow back to the attacker, but the kernel does read past the buffer on every Text PDU with DataDigest=CRC32C. Fix by passing the actual padded payload length (ALIGN(payload_length, 4)) that was used for the kzalloc(). 2) Stale cmd->text_in_ptr re-free (double-free) on ERL>0 bad DataDigest drop. On DataDigest mismatch with ErrorRecoveryLevel > 0 the handler silently drops the PDU and lets the initiator plug the CmdSN gap: kfree(text_in); return 0; cmd->text_in_ptr still points at the freed buffer. The next Text Request on the same ITT re-enters iscsit_setup_text_cmd(), which unconditionally does kfree(cmd->text_in_ptr); cmd->text_in_ptr = NULL; freeing the same pointer a second time. Session teardown via iscsit_release_cmd() has the same shape and hits the same double-free if the connection is dropped before a second Text Request arrives. On an unmodified mainline tree the bug-1 CRC overread fires first on the initial valid Text Request and perturbs the subsequent state, so #4 was isolated by building a kernel with only the bug-1 hunk of this patch applied plus temporary printk() observability around the three relevant kfree() sites. The observability prints are not part of this patch. On that build, a three-PDU Text Request sequence after login produces two back-to-back splats: BUG: KASAN: double-free in iscsit_setup_text_cmd+0x?? BUG: KASAN: double-free in iscsit_release_cmd+0x?? showing the same pointer freed in the ERL>0 drop path and again in iscsit_setup_text_cmd() (next Text Request on the same ITT) and once more in iscsit_release_cmd() (session teardown). On distro kernels with CONFIG_SLAB_FREELIST_HARDENED=y (default) the double-free becomes a remote kernel BUG(); on non-hardened kernels it corrupts the slab freelist. Fix by clearing cmd->text_in_ptr after the kfree() in the ERL>0 drop path. With both hunks applied #4 is directly observable on the stock tree without observability printks; fixing bug-1 alone would mask #4 less, not more, so the hunks are submitted together. Both fixes are one-liners. The Text PDU state machine is unchanged and the wire protocol is unaffected.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Bound iscsi_encode_text_output() appends to rsp_buf iscsi_encode_text_output() concatenates "key=value\0" records into login->rsp_buf, an 8192-byte kzalloc(MAX_KEY_VALUE_PAIRS) buffer allocated in iscsit_alloc_login_setup_buffer(). The three sprintf() call sites in this function (lines 1398, 1411, 1424 in v7.1-rc2) never check the remaining buffer capacity: *length += sprintf(output_buf, "%s=%s", er->key, er->value); *length += 1; output_buf = textbuf + *length; The 8192-byte ceiling at iscsi_target_check_login_request() bounds the *input* Login PDU payload, but a single PDU can carry up to 2048 minimal four-byte "a=b\0" pairs, each unknown key expanding to a 16-byte "a=NotUnderstood\0" output record via iscsi_add_notunderstood_response(). 2048 * 16 = 32 KiB of output into an 8 KiB buffer, producing a ~24 KiB heap overrun in the kmalloc-8k slab. The fix introduces a static iscsi_encode_text_record() helper that uses snprintf() with a per-call bounds check against the remaining buffer, and threads a u32 textbuf_size parameter through iscsi_encode_text_output(). Both call sites in iscsi_target_handle_csg_zero() (PHASE_SECURITY) and iscsi_target_handle_csg_one() (PHASE_OPERATIONAL) pass MAX_KEY_VALUE_PAIRS. On overflow the encoder logs the condition, calls iscsi_release_extra_responses() to drop queued records, and returns -1; both caller sites now emit ISCSI_STATUS_CLS_INITIATOR_ERR / ISCSI_LOGIN_STATUS_INIT_ERR via iscsit_tx_login_rsp() before returning, so the initiator sees an explicit failed-login response rather than a silent connection drop. (Prior to this patch only the PHASE_OPERATIONAL caller did that; the PHASE_SECURITY caller is converted to the same shape.)

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Validate CHAP_R length before base64 decode chap_server_compute_hash() allocates client_digest as kzalloc(chap->digest_size) and then, for BASE64-encoded responses, passes chap_r directly to chap_base64_decode() without checking whether the input length could produce more than digest_size bytes of output. chap_base64_decode() writes to the destination unconditionally as long as there is input to consume. With MAX_RESPONSE_LENGTH set to 128 and the "0b" prefix stripped by extract_param(), up to 127 base64 characters can reach the decoder. 127 characters decode to 95 bytes. For SHA-256 (digest_size=32) this overflows client_digest by 63 bytes; for MD5 (digest_size=16) the overflow is 79 bytes. The length check at line 344 fires after the write has already happened. The HEX branch in the same switch statement already validates the length up front. Apply the same approach to the BASE64 branch: strip trailing base64 padding characters, then reject any input whose data length exceeds DIV_ROUND_UP(digest_size * 4, 3) before calling the decoder. Stripping trailing '=' before the comparison handles both padded and unpadded encodings. chap_base64_decode() already returns early on '=', so the full original string is still passed to the decoder unchanged. The mutual CHAP path decodes CHAP_C into initiatorchg_binhex, which is kzalloc(CHAP_CHALLENGE_STR_LEN). extract_param() caps initiatorchg at CHAP_CHALLENGE_STR_LEN characters, so at most CHAP_CHALLENGE_STR_LEN-1 base64 characters reach the decoder. The maximum decoded size, DIV_ROUND_UP((CHAP_CHALLENGE_STR_LEN-1) * 3, 4), is less than CHAP_CHALLENGE_STR_LEN, so no overflow is possible there. A comment is added at the call site to document this.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: airoha: Do not read uninitialized fragment address in airoha_dev_xmit() The transmit loop in airoha_dev_xmit() reads fragment address and length during its final iteration, when the loop index equals skb_shinfo(skb)->nr_frags, at which point the fragment data is uninitialized. While these values are never consumed, the read itself is unsafe and may trigger a page fault. Fix this by avoiding the fragment read on the last iteration. Additionally, move the skb pointer from the first to the last used packet descriptor, so that airoha_qdma_tx_napi_poll() defers freeing the skb until the final descriptor is processed.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: net: skmsg: preserve sg.copy across SG transforms The sk_msg sg.copy bitmap is part of the scatterlist entry ownership state. A set bit tells sk_msg_compute_data_pointers() not to expose the entry through writable BPF ctx->data. This protects entries backed by pages that are not private to the sk_msg, such as splice-backed file page-cache pages. Several sk_msg transform paths move, copy, split, or compact msg->sg.data[] entries without moving the matching sg.copy bit. This can make an externally backed entry arrive at a new slot with a clear copy bit. A later SK_MSG verdict can then expose sg_virt(sge) as writable ctx->data and BPF stores can modify the original page cache. Keep sg.copy synchronized with sg.data[] whenever entries are transferred, shifted, split, or copied into a new sk_msg. Clear the bit when an entry is replaced by a newly allocated private page or freed. This covers the BPF pull/push/pop helpers, sk_msg_shift_left/right(), sk_msg_xfer(), and tls_split_open_record(), including the partial tail entry created during TLS open-record splitting.

Linux

In the Linux kernel, the following vulnerability has been resolved: gcov: use atomic counter updates to fix concurrent access crashes GCC's GCOV instrumentation can merge global branch counters with loop induction variables as an optimization. In inflate_fast(), the inner copy loops get transformed so that the GCOV counter value is loaded multiple times to compute the loop base address, start index, and end bound. Since GCOV counters are global (not per-CPU), concurrent execution on different CPUs causes the counter to change between loads, producing inconsistent values and out-of-bounds memory writes. The crash manifests during IPComp (IP Payload Compression) processing when inflate_fast() runs concurrently on multiple CPUs: BUG: unable to handle page fault for address: ffffd0a3c0902ffa RIP: inflate_fast+1431 Call Trace: zlib_inflate __deflate_decompress crypto_comp_decompress ipcomp_decompress [xfrm_ipcomp] ipcomp_input [xfrm_ipcomp] xfrm_input At the crash point, the compiler generated three loads from the same global GCOV counter (__gcov0.inflate_fast+216) to compute base, start, and end for an indexed loop. Another CPU modified the counter between loads, making the values inconsistent - the write went 3.4 MB past a 65 KB buffer. Add -fprofile-update=prefer-atomic to CFLAGS_GCOV at the global level in the top-level Makefile, guarded by a try-run compile test. The test compiles a minimal program with and without -fprofile-update=prefer-atomic using the full KBUILD_CFLAGS, then compares undefined symbols in the resulting object files. If prefer-atomic introduces new undefined references (such as __atomic_fetch_add_8 on i386 or __aarch64_ldadd8_relax on arm64 with outline-atomics), the flag is not added -- the kernel does not link against libatomic. On architectures where GCC inlines 64-bit atomic counter updates (x86_64, s390, ...) the test passes and the flag is enabled, preventing the compiler from merging counters with loop induction variables and fixing the observed concurrent-access crash. On architectures where the flag would introduce libatomic dependencies, it is silently omitted and behaviour is no worse than before this patch. Move the CFLAGS_GCOV block from its original position (before the arch Makefile include) to after the core KBUILD_CFLAGS assignments but before the scripts/Makefile.gcc-plugins include. This placement ensures the try-run test sees arch-specific flags (-m32, -march=, -mno-outline-atomics) while avoiding GCC plugin flags (-fplugin=) that would break the test on clean builds when plugin shared objects do not yet exist.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: exfat: fix potential use-after-free in exfat_find_dir_entry() In exfat_find_dir_entry(), the buffer_head obtained from exfat_get_dentry() is released with brelse(bh) before the fall-through TYPE_EXTEND branch reads the directory entry through ep (which points into bh->b_data): brelse(bh); if (entry_type == TYPE_EXTEND) { ... len = exfat_extract_uni_name(ep, entry_uniname); ... } After brelse() drops our reference, nothing guarantees that the underlying page backing bh->b_data remains valid for the subsequent exfat_extract_uni_name() read. This is the same pattern fixed in commit fc961522ddbd ("exfat: Fix potential use after free in exfat_load_upcase_table()"). Move brelse(bh) so it runs after ep is no longer dereferenced on each branch. Confirmed on QEMU x86_64 with CONFIG_KASAN=y + CONFIG_DEBUG_PAGEALLOC=y + CONFIG_PAGE_POISONING=y on linux-next, using a crafted exFAT image (long filename with same-hash collisions forcing the TYPE_EXTEND path). With a debug-only invalidate_bdev() inserted between brelse(bh) and the ep read to make the stale-deref window deterministic, the unpatched kernel faults: BUG: KASAN: use-after-free in exfat_find_dir_entry+0x133b/0x15a0 BUG: unable to handle page fault for address: ffff88801a5fa0c2 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI RIP: 0010:exfat_find_dir_entry+0x1188/0x15a0 With this patch applied, the same instrumented harness completes cleanly under the same sanitizer stack. I have not reproduced a crash on an uninstrumented kernel under ordinary reclaim; the instrumented A/B establishes the lifetime violation and that the patch closes it, not an unaided triggerability claim.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: pNFS: Fix use-after-free in pnfs_update_layout() When hitting the NFS_LAYOUT_RETURN branch in pnfs_update_layout(), the code calls pnfs_prepare_to_retry_layoutget(lo). If it succeeds, pnfs_put_layout_hdr(lo) is called before trace_pnfs_update_layout(), which still references 'lo'. This results in a use-after-free when the tracepoint accesses lo's fields. Fix this by moving the tracepoint call before pnfs_put_layout_hdr(lo).

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: 9p: avoid putting oldfid in p9_client_walk() error path When p9_client_walk() is called with clone set to false, fid aliases oldfid. If the walk subsequently fails after the request has been sent, the error path jumps to clunk_fid, which currently calls p9_fid_put(fid) unconditionally. This drops a reference to oldfid even though ownership of oldfid remains with the caller. If this is the last reference, oldfid can be clunked and destroyed while the caller still expects it to be valid. A later use or put of oldfid can then trigger a use-after-free or refcount underflow. Fix this by only putting fid in the clunk_fid error path when it does not alias oldfid, matching the existing guard in the error path below. This can be triggered when a multi-component walk is split into multiple p9_client_walk() calls and a later non-cloning walk fails. A reproducer and refcount warning logs are available on request.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: nfsd: release layout stid on setlease failure nfs4_alloc_stid() publishes the new stid into cl->cl_stateids via idr_alloc_cyclic() under cl_lock before returning to nfsd4_alloc_layout_stateid(). When nfsd4_layout_setlease() then fails, the error path frees the layout stateid directly with kmem_cache_free() without ever calling idr_remove(), leaving the IDR slot pointing at freed slab memory. Any subsequent IDR walker (states_show, client teardown) dereferences the dangling pointer. The correct teardown for an IDR-published stid is nfs4_put_stid(), which removes the IDR slot under cl_lock, dispatches sc_free (nfsd4_free_layout_stateid) to release ls->ls_file via nfsd4_close_layout(), and drops the nfs4_file reference in its tail. A second issue blocks that switch: nfsd4_free_layout_stateid() unconditionally inspects ls->ls_fence_work via delayed_work_pending() under ls_lock, but INIT_DELAYED_WORK(&ls->ls_fence_work, ...) currently runs only after the setlease call. On the setlease-failure path the destructor would touch an uninitialized delayed_work. nfsd4_alloc_layout_stateid() nfs4_alloc_stid() /* idr_alloc_cyclic under cl_lock */ nfsd4_layout_setlease() /* fails */ nfs4_put_stid() nfsd4_free_layout_stateid() delayed_work_pending(&ls->ls_fence_work) /* needs INIT */ nfsd4_close_layout() /* nfsd_file_put(ls->ls_file) */ put_nfs4_file() Fix by hoisting the ls_fenced / ls_fence_delay / INIT_DELAYED_WORK initialization above the nfsd4_layout_setlease() call, and replace the manual nfsd_file_put + put_nfs4_file + kmem_cache_free cleanup with a single nfs4_put_stid(stp).

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix SECINFO_NO_NAME decode error cleanup nfsd4_decode_secinfo_no_name() currently initializes sin_exp after decoding sin_style. If the XDR stream is truncated, the decoder returns nfserr_bad_xdr before sin_exp is initialized. Since commit 3fdc54646234 ("NFSD: Reduce amount of struct nfsd4_compoundargs that needs clearing"), the inline iops array is not cleared between RPC calls. A failed SECINFO_NO_NAME decode can therefore leave sin_exp holding stale union contents from a previous operation. The error response path still invokes nfsd4_secinfo_no_name_release(), which calls exp_put() on a non-NULL sin_exp. Initialize sin_exp before the first failable decode step, matching nfsd4_decode_secinfo().

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: serial: 8250_dw: unregister 8250 port if clk_notifier_register() fails dw8250_probe() registers the 8250 port via serial8250_register_8250_port() and then, if the device has a clock, registers a clock notifier. If clk_notifier_register() fails, probe returns the error but leaves the 8250 port registered. The matching serial8250_unregister_port() lives in dw8250_remove(), which is not called when probe fails, so the port slot stays occupied until the device is rebound or the system is rebooted. The devm-allocated driver data is freed while the port still references it (via the saved private_data and serial_in/serial_out callbacks), so any access to that port slot before a rebind is a use-after-free hazard. Unregister the port on the clk_notifier_register() error path.

@fastify/http-proxy · Fastify fastify\/http-proxy

Impact: @fastify/http-proxy versions up to and including 11.5.0 fail to rewrite the request prefix when the prefix segment is URL-encoded. Fastify's router URL-decodes paths for route matching, but request.url retains the original encoded form, and the prefix-rewrite step uses a literal string replace against the decoded prefix. A request that encodes one or more characters of the configured prefix therefore matches the route but skips the rewrite, so the raw encoded path is forwarded to the upstream unchanged. The upstream then decodes the path and serves it, letting an attacker reach upstream paths that the proxy was configured to hide via rewritePrefix, including internal or administrative endpoints. Patches: upgrade to @fastify/http-proxy 11.6.0. Workarounds: none.

@fastify/reply-from · Fastify fastify\/reply-from

Impact: @fastify/reply-from versions from 8.3.1 up to but not including 12.6.4 build the internal URL cache key by concatenating the destination and source path without a delimiter. Different destination and source pairs can therefore produce the same key while resolving to different upstream URLs. When getUpstream selects an upstream from request data, a URL cached for one upstream can be reused for a request intended for another upstream, causing cross-upstream data access and modification. The default configuration is affected. Setting disableCache to true prevents the behavior. Patches: upgrade to @fastify/reply-from 12.6.4. Workarounds: pass disableCache: true when registering the plugin.

@fastify/http-proxy · Fastify fastify\/http-proxy

Impact: @fastify/http-proxy versions from 9.4.0 up to and including 11.5.0 fail to validate the resolved WebSocket destination path against the configured rewrite prefix. The WebSocket routing path in WebSocketProxy.findUpstream resolves the destination via the WHATWG URL constructor, which collapses dot segments, so a crafted upgrade request with path traversal sequences can escape the rewrite prefix and reach upstream endpoints that were not meant to be exposed by the proxy. This is a variant of CVE-2021-21322 in a code path that never went through the HTTP fix in fastify/reply-from. Exploitation requires a non-normalizing WebSocket client, since browsers and the ws package normalize the request path before sending, but raw HTTP clients or downstream proxies that forward the request target unchanged make the attack reachable in production topologies. Patches: upgrade to @fastify/http-proxy 11.6.0. Workarounds: none.

VMware Avi Load Balancer · Broadcom vmware avi load balancer

VMware Avi Load Balancer contains an authentication bypass vulnerability. A malicious user with network access may be able to access the Avi Control plane by bypassing the authentication mechanism. Affected versions: 31.1.1 through 31.2.2 (fixed in 31.2.2-2p3) 30.1.1 through 30.2.6 (fixed in 30.2.7) 22.1.1 through 22.1.7 (fixed in 30.2.7)

avo-hq avo

Avo is a framework to create admin panels for Ruby on Rails apps. Prior to 3.32.1 and 4.0.0.beta.51, Avo's association attach workflow checks attach_<association>? in the UI and GET /resources/:resource/:id/:related/new path, but the actual write endpoint, POST /resources/:resource/:id/:related, does not run the same authorization check before mutating the association through Avo::AssociationsController#create. An authenticated low-privileged Avo user can bypass hidden or disabled attach controls and directly attach related records to a parent record by sending a crafted POST request, which can lead to privilege escalation and cross-tenant data exposure where associations represent authorization-bearing relationships. This issue is fixed in versions 3.32.1 and 4.0.0.beta.51.

PrestaShop ps_facetedsearch

PrestaShop ps_facetedsearch is a module that adds layered navigation filters. From 3.0.0 until 4.0.4, the ps_facetedsearch module rebuilds selected search filters from the request URL, and the value of a slider filter, price or weight, is taken from the URL without sufficient validation and stored in an internal filter-block cache where it is serialized and later read back with a raw native unserialize() in src/Filters/Block.php. By crafting that value, an unauthenticated attacker can smuggle a malicious serialized PHP object into the cache, and when it is deserialized, a gadget chain writes an arbitrary PHP file inside the modules/ps_facetedsearch/ directory, which is then used as a webshell to run commands on the server. This issue is fixed in version 4.0.4.

cool-admin-java 8.0.0 has a SQL injection vulnerability in the order() method of CrudOption.java.

CodeIgniter4

CodeIgniter is a PHP full-stack web framework. Prior to 4.7.3, the ext_in upload validation rule in system/Validation/StrictRules/FileRules.php checked the MIME-derived guessed extension instead of the client-provided filename extension. As a result, an uploaded file named shell.php containing GIF-like content could pass validation such as uploaded[avatar]|is_image[avatar]|mime_in[avatar,image/gif]|ext_in[avatar,gif] because the detected MIME type maps to gif, even though the uploaded filename extension is php. Applications are impacted if they accept user-controlled uploads, rely on ext_in to validate the uploaded filename extension, save uploaded files using the original client filename with $file->move($path), store uploads in a web-accessible directory, and allow PHP or other executable files to run from that directory. In those conditions, this may lead to arbitrary code execution. This issue is fixed in version 4.7.3.

IBM Langflow OSS · Langflow langflow

IBM Langflow OSS 1.0.0 through 1.10.1 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data.

IBM Langflow OSS · Langflow langflow

IBM Langflow OSS 1.0.0 through 1.10.0 Langflow could allow an attacker to write arbitrary files to unintended locations due to improper input validation in the APIRequest component. A path traversal vulnerability exists when the "Save to File" feature is enabled, where filenames extracted from HTTP response Content-Disposition headers are not sanitized before being joined to the temporary directory path. An attacker controlling an external HTTP server can supply crafted filename values containing path traversal sequences (e.g., ../), enabling arbitrary file writes to locations accessible by the Langflow process.

IBM Langflow OSS · Langflow langflow

IBM Langflow OSS 1.0.0 through 1.10.0 allows authenticated users to escalate privileges to superuser by directly manipulating the database, execute arbitrary system commands, and achieve full system compromise with Langflow service permissions.

IBM Langflow OSS · Langflow langflow

IBM Langflow OSS 1.0.0 through 1.10.0 has a vulnerability in Langflow's webhook authentication logic allows unauthenticated users to trigger the execution of any flow. The system incorrectly bypasses API key validation when the WEBHOOK_AUTH_ENABLE configuration is set to False (which is the default setting). This allows a remote attacker who knows a flow's UUID to execute it as if they were the owner, potentially leading to Remote Code Execution (RCE).

IBM Langflow OSS · Langflow langflow

IBM Langflow OSS 1.0.0 through 1.10.0 contain a critical remote code execution vulnerability in the code validation API endpoint. The POST /api/v1/validate/code endpoint accepts user-supplied Python code and executes it directly using Python's built-in exec() function without sandboxing, input validation, or privilege restrictions, enabling any authenticated user to execute arbitrary system commands with the full privileges of the Langflow server process.

IBM Langflow OSS · Langflow langflow

IBM Langflow OSS 1.0.0 through 1.10.0 contain a critical remote code execution vulnerability in the disk-based caching mechanism. The AsyncDiskCache class uses Python's unsafe pickle.loads() function to deserialize cached objects from disk without validation, integrity verification, or authentication, enabling arbitrary code execution when malicious pickle payloads are processed. Attackers who can influence cached data through file system access, malicious workflow inputs, custom components, or API manipulation can achieve complete system compromise with the privileges of the Langflow server process.

WordPress · Wordpress wordpress

WordPress 6.9.x before 6.9.5 and 7.0.x before 7.0.2 is affected by a REST API batch endpoint route confusion issue which, combined with the author__not_in WP_Query SQL Injection (CVE-2026-60137), could allow an attacker to perform SQL Injection and achieve Remote Code Execution.

An issue in Generic OEM UZ801_v2.1 4G LTE Router V3.4.3 allows a remote attacker to execute arbitrary code via the sbin/adbd component

shivammathur setup-php · Shivammathur setup php

setup-php is a GitHub action to set up PHP with extensions, php.ini configuration, coverage drivers, and tools. From 2.25.0 prior to 2.37.1, shivammathur/setup-php resolves the PHP version from repository-controlled files such as .php-version, composer.lock through platform-overrides.php, and composer.json through config.platform.php, and insufficiently constrains those values before incorporating them into generated shell or PowerShell setup scripts, allowing command injection on a GitHub Actions runner when workflows such as pull_request_target check out attacker-controlled contents before invoking setup-php. This issue is fixed in version 2.37.1.

django-pyas2 through 1.2.3 is vulnerable to OS command injection via the cmd_receive and cmd_send fields on the Partner model. These fields are passed directly to os.system() in pyas2/utils.py without sanitization, allowing an authenticated admin user to execute arbitrary commands on the server when an AS2 message is received or sent.

An unauthenticated arbitrary file upload vulnerability in ck_upload_handler.php in Feng Office 3.11.13.11 allows remote attackers to upload malicious files (such as .html) to the web-accessible /tmp/ directory.

IBM Engineering AI Hub

IBM Engineering AI Hub 1.0.0, 1.1.0, and 1.2.0 could allow a remote attacker to execute arbitrary scripts due to improper neutralization of input during web page generation.

IBM Db2 Genius Hub · IBM Agentics

IBM Db2 Genius Hub 1.1, 1.1.1, 1.1.2 and IBM Agentics 1.0 could allow an attacker to execute arbitrary code or obtain sensitive information due to the use of dangerous functions without sufficient restrictions.

IBM Storage Protect Client · Ibm storage protect

IBM Storage Protect Client 8.1.0.0 through 8.1.27.0, 8.1.27.1, and 8.2.0.0 through 8.2.1.0 IBM Storage Protect is vulnerable to a heap-based buffer overflow, caused by improper bounds checking. A remote attacker could overflow a buffer and execute arbitrary code on the system or cause the server to crash.

IBM Langflow OSS · Langflow langflow

IBM Langflow OSS 1.0.0 through 1.10.1 Lanflow OSS contains an unauthenticated remote code execution vulnerability in the public flow build endpoint ( /api/v1/build_public_tmp/{flow_id}/flow ). The vulnerability stems from an incomplete denylist in the validate_public_flow_no_code_execution() function that fails to block several code-execution agent components including OpenDsStarAgent, CodeActAgentSmolagents, and CSVAgent.

An issue was discovered in openRISC OR1200 commit 83ac6b. An output mismatch between the RTL and the netlist of the or1200 cpu output port can lead to unexpected behavior.

IBM Langflow OSS · Langflow langflow

IBM Langflow OSS 1.0.0 through 1.10.0 Langflow versions up to 1.9.2 (commit 94981c443d4918517b9e8163d70fc598dc33a32d) contain a code injection vulnerability in the Policies component's ToolGuard integration that bypasses the allow_custom_components=false security control. The vulnerability exists because the validation mechanism only checks the main component source code in node_template["code"]["value"] but fails to validate dynamic CodeInput fields that store generated ToolGuard Python files. Attackers can embed malicious Python code in these unvalidated dynamic fields, which are persisted in Flow.data and later executed server-side when a guarded tool is invoked through the ToolGuard runtime. This allows authenticated users with flow creation privileges to achieve arbitrary Python code execution on the backend despite custom component restrictions. The vulnerability can be escalated through cross-tenant flow manipulation via the agentic MCP update_flow_component_field tool, which accepts attacker-controlled user_id parameters, enabling attackers to inject malicious code into victim users' flows. When combined with publicly accessible flows and specific misconfigurations (AUTO_LOGIN=true, NEW_USER_IS_ACTIVE=true), the attack can be conducted with reduced authentication requirements.

IBM Langflow OSS · Langflow langflow

IBM Langflow OSS 1.0.0 through 1.10.0 could allow a remote attacker to gain unauthorized access due to improper authentication in the /api/v1/login/auto_login endpoint. The endpoint issues long-lived superuser bearer tokens without requiring authentication when the AUTO_LOGIN configuration is enabled (enabled by default), which may allow an unauthenticated network attacker to obtain full administrative access. Additionally, permissive cross-origin resource sharing (CORS) settings may allow tokens to be exposed to unintended origins, increasing the risk of unauthorized access.

IBM Langflow OSS · Langflow langflow

IBM Langflow OSS 1.0.0 through 1.10.0 allows unauthenticated attackers to create unlimited user accounts on any Langflow instance; when NEW_USER_IS_ACTIVE=true (documented deployment option), newly created accounts are immediately active and can authenticate to reach RCE endpoints, bypassing the need for AUTO_LOGIN.

IBM Langflow OSS · Langflow langflow

IBM Langflow OSS 1.0.0 through 1.10.0 allows unauthenticated attackers to chain /api/v1/auto_login (mints SUPERUSER tokens to any network caller) with /api/v1/validate/code (executes user code via exec()) to achieve full RCE on default Langflow deployments

Sangoma Switchvox SMB Edition · Sangoma switchvox

An unauthenticated SQL injection vulnerability exists in Sangoma Switchvox SMB Edition 8.3 (104997). The /pa endpoint processes XML content beginning with <PolycomIPPhone> and directly concatenates the user-controlled PhoneIP value into PostgreSQL queries without sanitization or parameterization. An unauthenticated remote attacker can execute arbitrary SQL statements against the backend PostgreSQL database using a single crafted request, including database operations and remote code execution.

Gis Informatics Engineering Consulting Laboratory R&D and Software Services Inc. GisLab Laboratory Management System

Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in Gis Informatics Engineering Consulting Laboratory R&D and Software Services Inc. GisLab Laboratory Management System allows SQL Injection. This issue affects GisLab Laboratory Management System: from 1.4.03 through 08072026.

ZcashFoundation zebra · zcash halo2_gadgets · zcash orchard · zcash librustzcash

ZEBRA is a Zcash node written entirely in Rust. Prior to zebrad 5.0.0, halo2_gadgets 0.5.0, orchard 0.14.0, zcash_primitives 0.28.0, and zcashd 6.20.0, the variable-base scalar multiplication gadget in halo2_gadgets/src/ecc/chip/mul/incomplete.rs used assign_advice() for the base point without a copy constraint tying it to the actual base, allowing a malicious prover to produce a valid proof for an Orchard Action with an under-constrained base point and bypass the diversified-address-integrity check that binds pk_d, g_d, ivk, the nullifier (nf), and the spend validating key (ak) to the note being spent. This issue is fixed in zebrad 5.0.0, halo2_gadgets 0.5.0, orchard 0.14.0, zcash_primitives 0.28.0, and zcashd 6.20.0.

Vimesoft Inc. Enterprise Video Platform

Missing Authorization vulnerability in Vimesoft Inc. Enterprise Video Platform allows Accessing Functionality Not Properly Constrained by ACLs. This issue affects Enterprise Video Platform: from 3.11.0.0 before 3.25.0.

Vimesoft Inc. Enterprise Video Platform

Authorization bypass through User-Controlled key vulnerability in Vimesoft Inc. Enterprise Video Platform allows Accessing Functionality Not Properly Constrained by ACLs. This issue affects Enterprise Video Platform: from 3.11.0.0 before 3.25.0.

Vimesoft Inc. Enterprise Video Platform

Unverified password change vulnerability in Vimesoft Inc. Enterprise Video Platform allows Authentication Bypass. This issue affects Enterprise Video Platform: from 3.11.0.0 before 3.25.0.

joomdonation.com Events Booking extension for Joomla

Joomla Extension - joomdonation.com - Insecure default configuration Events Booking < 5.8.0 - The Joomla extension Events Booking prior version 5.8.0 did by default allow unauthenticated users to upload media assets.

Proxmox libpve-storage-perl

libpvestorage-perl v9.1.1 and libpve-storage-perl v8.3.7 were discovered to contain an XML External Entity (XXE) vulnerability.

HCL Software Aftermarket EPC

HCL Aftermarket EPC is affected by Business Logic Vulnerability using which a non valid user of the application can obtain passwords from the server and redirect them to their own email address by manipulating the server's response. The application includes checks in the initial requests to verify the validity of the provided UserId, but similar validation is not applied to Email requests when sending passwords to user emails.

Unknown AI Copilot

The AI Copilot WordPress plugin before 1.5.4 does not bind OAuth access tokens to a WordPress user, and accepts any valid token as an administrator session, allowing unauthenticated attackers who complete the public OAuth flow to execute privileged MCP tools as an administrator, including arbitrary user creation and role escalation.

CodeRevolution Aimogen Pro - All-in-One AI Content Writer, Editor, ChatBot & Automation Toolkit

The Aimogen Pro - All-in-One AI Content Writer, Editor, ChatBot & Automation Toolkit plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 2.8.4. This is due to due to a missing capability check on the 'aiomatic_call_google_ai_function' function. This makes it possible for unauthenticated attackers to leverage the 'aimogen_wp_god_mode' tool to clear function blacklists and execute arbitrary PHP functions, such as creating administrator accounts.

MohibShaikh clawvet

clawvet self-hosted API server (apps/api) before 0.7.5 hard-codes a fallback JWT secret ('clawvet-dev-secret-change-me') in auth.ts and ships it as the default in .env.example. Because GET /api/v1/scans returns scan records containing userId values without authentication, a remote unauthenticated attacker can harvest a victim's userId, forge a valid HS256 cg_session cookie offline using the known secret, and call GET /api/v1/auth/me to obtain the victim's email address, subscription plan, and secret apiKey. The published clawvet npm package (CLI only) is not affected.

Bricksforge

The Bricksforge plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 3.1.8.6. This is due to improper validation of the fieldIds parameter in the Pro Forms registration action, which allows attacker-supplied field IDs to be added to the trusted form-field whitelist. This makes it possible for unauthenticated attackers to register a new administrator account by submitting a crafted request to a publicly accessible Bricksforge Pro Forms registration form. Successful exploitation requires that the site has a public Bricksforge Pro Forms element configured with the User Registration action.

jupyter-server enterprise_gateway · Jupyter enterprise gateway

Jupyter Enterprise Gateway launches remote Jupyter Notebook kernels across distributed clusters like Apache Spark, Kubernetes, and Docker Swarm. In versions prior to 3.3.0, the server interpolates untrusted environment variables (e.g., KERNEL_XXX) into Kubernetes manifests without YAML-aware escaping, enabling YAML injection attacks. Attackers can inject new fields, overwrite critical fields (e.g., duplicate securityContext keys, where the last one prevails), and inject document boundaries (--- for new documents, ... for end-of-document) to generate multiple resources, potentially creating arbitrary types, such as privileged pods. The Jinja2 template for the Kubernetes manifest contains several kernel_xxx variables, such as kernel_working_dir that are used when rendering the manifest and are all vectors for YAML injection. This issue has been fixed in version 3.3.0.

jupyter-server enterprise_gateway · Jupyter enterprise gateway

Jupyter Enterprise Gateway launches remote Jupyter Notebook kernels across distributed clusters like Apache Spark, Kubernetes, and Docker Swarm. In versions 2.0.0rc2 and above, prior to 3.3.0, the environment variables (KERNEL_XXX) used during the rendering of the Kubernetes manifest are vulnerable to Server Side Template Injection (SSTI). By including Jinja2 template expressions it is possible to execution Python code and OS Commands in the Enterprise Gateway service. The code can use or steal the Kubernetes service account token, which can steal Kubernetes secrets and be used to fully compromise the Kubernetes cluster by scheduling a privileged pod or a pod with a hostPath volume mount. This issue has been fixed in version 3.3.0.

TODDR YAML::Syck

YAML::Syck versions before 1.47 for Perl allow an out-of-bounds read via a signed-char lookup-table index in syck_base64dec. The base64 decoder in the bundled libsyck indexes the 256-entry static table b64_xtable with a signed char, so any !!binary byte >= 0x80 sign-extends to a negative index and reads before the table. The decoder receives the raw bytes of any !!binary node, a standard YAML type not gated by $LoadBlessed or $LoadCode, so it is reached on the default Load path. Any caller that runs Load or LoadFile on an untrusted document containing a !!binary scalar with a high-bit byte triggers the read, and the value read can surface in the decoded result.

Zoom Communications Zoom Workplace for Windows · Zoom workplace desktop · Zoom workplace virtual desktop infrastructure

Improper Input Validation in Zoom Desktop Client for Windows, Zoom VDI Client for Windows, and Zoom Meeting SDK for Windows may allow an unauthenticated user to conduct an account takeover via network access.

jupyter-server enterprise_gateway · Jupyter enterprise gateway

Jupyter Enterprise Gateway launches remote Jupyter Notebook kernels across distributed clusters like Apache Spark, Kubernetes, and Docker Swarm. Versions 2.0.0rc1 and above prior to 3.3.0 have a prohibited UID and GID feature that by default prevents launching kernels with UID or GID 0 (root), and this restriction can be bypassed using a specially crafted KERNEL_UID or KERNEL_GID value. This input validation vulnerability allows running Jupyter kernels as root, which can be dangerous as it allows more attack surface, and may lead to container escapes, compromising the worker node and all workloads running on it. Repeated exploitation can compromise all worker nodes, and thus the entire Kubernetes cluster. It is possible to specify volume mounts, so one vector for a container escape is to use a hostPath R/W volume mount, use this UID/GID bypass to run as root, and then gain code execution in the underlying worker node by creating a crontab entry in the mounted host file system. This issue has been fixed in version 3.0.0.

A SQL injection vulnerability in the /ureport/datasource/previewData component of ureport v2.2.9 allows attackers to access sensitive database information via crafted SQL statements.

wg-easy

WireGuard Easy through 15.3.0, fixed in commit 66b292b, contains a cryptographically weak one-time link token generation vulnerability that allows unauthenticated network attackers to recover WireGuard peer credentials by brute-forcing a keyspace of at most 1000 candidate tokens per client ID, as the token is computed using CRC32 over a random value constrained to 0-999. Attackers can enumerate candidate tokens against the unauthenticated /cnf/:oneTimeLink route, which lacks rate limiting and does not validate token expiration, to obtain a peer's PrivateKey and PresharedKey and impersonate that peer on the VPN network.

illumos-gate · OmniOS · Triton Data Center SmartOS

The illumos SCTP inbound path performs association lookup for INIT ACK chunks without adequately validating the address parameters carried in the chunk. Since this lookup runs during packet classification (i.e. before SCTP integrity checks or IPsec policy are applied) a remote, unauthenticated attacker can send a crafted SCTP INIT ACK packet with malformed address parameters to cause an out-of-bounds access and kernel heap corruption, which may lead to remote code execution. The flaw has existed since 2010 (illumos-gate commit a5407c02), and affects any illumos distribution prior to illumos-gate commit 53a3efde.

argoproj argo-workflows · Argoproj argo workflows

Argo Workflows is an open source container-native workflow engine for orchestrating parallel jobs on Kubernetes. Prior to 3.7.15 and 4.0.6, the allow-list fix for CVE-2026-31892 is incomplete because workflow/util/merge.go ValidateUserOverrides and SanitizeUserWorkflowSpec walk only the top-level fields of WorkflowSpec via reflection, and WorkflowSpec.ArtifactGC is allow-listed wholesale; the struct behind that field, WorkflowLevelArtifactGC, has a PodSpecPatch sub-field whose contents flow unmodified into util.ApplyPodSpecPatch on the artifact-GC pod, the same sink the original fix closed for WorkflowSpec.PodSpecPatch, so a user submitting a Workflow under templateReferencing: Strict or Secure (against a referenced WorkflowTemplate that declares an output artifact and setting spec.artifactGC.strategy: OnWorkflowCompletion) can still inject an arbitrary strategic merge patch into the artifact-GC pod, including hostPath volumes, privileged: true, arbitrary image and command, and hostNetwork: true, defeating the stated purpose of Strict/Secure reference mode. This issue is fixed in versions 3.7.15 and 4.0.6.

mwtcmi frogman

Frogman provides headless PBX control through MCP and HTTP API. Prior to 1.6.3, PERM_READ access was sufficient to call fm_list_managers, fm_list_pinsets, fm_show_context, fm_get_mcp_config, fm_backup_status, fm_whos_calling, fm_run_saved_query, and fm_diagnose_trunk, exposing AMI manager secrets, outbound dial PINs, full Asterisk dialplan context, root SSH connection commands, backup artifact paths, CDR history, arbitrary saved GraphQL query execution, and raw AMI endpoint dumps containing SIP fields such as password, md5_cred, and oauth_secret. This issue is fixed in version 1.6.3.

mwtcmi frogman

Frogman provides headless PBX control through MCP and HTTP API. Prior to 1.6.2, fm_dialplan_apply accepted template parameters including greeting, dest, url, extension, code, and file, and Tools/DialplanApply.php wrote Dialplan/Templates.php output to extensions_custom.conf while only Dialplan/TemplateBase.php:38-42 sanitized contextName(), allowing a PERM_WRITE caller using confirm:true to inject arbitrary Asterisk directives such as System(), Set(SHELL(...)), Goto, or Macro. This issue is fixed in version 1.6.2.

StratonWebDesigners HireFlow

HireFlow is a web-based interview management system for managing candidates, scheduling interviews, and tracking hiring progress. In 1.2 and earlier, app.py assigns a hard-coded Flask secret_key used to sign session cookies, allowing unauthenticated attackers who know the public source value to forge cookies containing role=admin and user_id values and bypass authentication. The advisory lists version 1.3 as fixed.

grafana-cold-storage oncall

Grafana OnCall through 1.16.11 contains an unauthenticated access vulnerability that allows remote attackers to obtain a valid PluginAuthToken by sending a POST request to the internal plugin install endpoint using hardcoded default stack_id and org_id values present in the public source tree. Attackers can leverage the acquired token to authenticate against all internal API endpoints, create arbitrary Admin users via the user-context header bootstrap path, revoke the legitimate plugin token, and redirect OnCall-to-Grafana API calls to an attacker-controlled host by overwriting the organization's grafana_url and api_token.

CODECHILD XML::Bare

XML::Bare versions through 0.53 for Perl have an unbounded character lookahead. The parserc_parse function attempts to check for multicharacter strings such as "<![CDATA" or element terminators such as ">" without checking that the offsets are within the buffer. Truncated strings such as "<a/" can trigger an out-of-bounds read.

CODECHILD HTML::Bare

HTML::Bare versions through 0.04 for Perl have an unbounded character lookahead. The parserc_parse function attempts to check for multicharacter strings such as "<![CDATA" or element terminators such as ">" without checking that the offsets are within the buffer. Truncated strings such as "<a/" can trigger an out-of-bounds read. Note that the latest version available on CPAN is version 0.02. Newer versions are available on the git repository.

yamcs · Spaceapplications yamcs

Yamcs is a mission control framework. Prior to 5.12.7, the Yamcs script evaluation engine for Python algorithms dynamically compiled and evaluated user-controlled algorithm text using Jython through the JSR-223 ScriptEngine API without enforcing a secure sandbox, so an authenticated user with the ChangeMissionDatabase privilege could override an existing Python algorithm's logic through the mission database REST API and import and execute arbitrary Java classes such as java.lang.Runtime to achieve remote code execution on the underlying host operating system. This issue is fixed in versions 5.12.7 and 5.13.0, which disable algorithm editing by default.

yamcs · Spaceapplications yamcs

Yamcs is a mission control framework. Prior to 5.12.7, the Nashorn ScriptEngine used to evaluate user-supplied JavaScript algorithm text in yamcs-core/src/main/java/org/yamcs/algorithms/ScriptAlgorithmExecutorFactory.java was constructed without a ClassFilter, so a user with the ChangeMissionDatabase privilege could override an algorithm through the MdbOverrideApi.updateAlgorithm endpoint and supply JavaScript that reaches arbitrary Java classes (for example Java.type("java.lang.Runtime").getRuntime().exec(...)) to execute arbitrary OS commands as the Yamcs process; in the default configuration with no security.yaml the built-in guest user has superuser=true, making the issue reachable without authentication. This issue is fixed in versions 5.12.7 and 5.13.0, which disable algorithm editing by default.

openziti zrok · Netfoundry zrok

zrok is software for sharing web services, files, and network resources. Prior to 2.0.3, zrok's Python SDK ProxyShare Flask proxy route accepts an absolute URL in the request path and passes it to urllib.parse.urljoin, allowing the requested path to replace the configured target host and causing requests.request to return a server-side response from an attacker-chosen URL. This issue is fixed in version 2.0.3.

yamcs · Spaceapplications yamcs

Yamcs is a mission control framework. Prior to 5.12.7, a server-side code injection vulnerability existed in the Yamcs algorithm evaluation engine org.yamcs.algorithms.JavaExprAlgorithmExecutionFactory, which dynamically compiled and evaluated user-controlled algorithm text through the Janino compiler without enforcing a secure sandbox, so an authenticated user with the ChangeMissionDatabase privilege could override an existing algorithm's text via the mission database REST API and inject Java code (for example using java.lang.Runtime) to achieve remote code execution on the underlying host operating system. This issue is fixed in versions 5.12.7 and 5.13.0, which disable algorithm editing by default.

yamcs · Spaceapplications yamcs

Yamcs is a mission control framework. Prior to 5.12.7, the authentication endpoint POST /auth/token in yamcs-core, handled by yamcs-core/src/main/java/org/yamcs/http/auth/AuthHandler.java, lacked any rate limiting, account lockout, or failed-attempt throttling, so an unauthenticated remote attacker could perform unlimited password-guessing attempts against any user account, significantly increasing the risk of successful brute-force attacks. This issue is fixed in versions 5.12.7 and 5.13.0.

TOKUHIROM Image::EPEG

Image::EPEG versions through 0.15 for Perl embeds an unsupported version of the Epeg library. Image::EPEG includes Epeg 0.9.0 that was last updated in 2004. Epeg is a fast JPEG thumbnail library that was once part of the Englightenment Project.

microsoft kiota

Kiota is an OpenAPI based HTTP Client code generator. Prior to 1.29.1 and 1.32.5, Kiota emitted x-ms-kiota-info clientClassName and clientNamespaceName values without identifier or path sanitization as both generated client class or namespace names and generated output path components when `kiota generate` ran without -c/--class-name, allowing an attacker-controlled or compromised OpenAPI description to write generated source outside the -o output directory and inject arbitrary text into generated class or namespace declarations. This issue is fixed in version 1.29.1 and 1.32.5 by GenerationConfiguration.SanitizeClientClassName and SanitizeClientNamespaceName.

microsoft kiota

Kiota is an OpenAPI based HTTP Client code generator. Prior to 1.29.1 and 1.32.5, `kiota info` read x-ms-kiota-info.languagesInformation.<language>.dependencyInstallCommand plus dependency name and version values from an OpenAPI description and presented the spec-supplied command as Kiota's recommended install command, allowing an attacker-controlled or compromised description to cause command injection when the suggested command was run manually or through the Kiota VS Code extension's kiota info --json dependency-install flow. This issue is fixed in version 1.29.1 and 1.32.5.

microsoft kiota

Kiota is an OpenAPI based HTTP Client code generator. Prior to 1.29.1 and 1.32.5, `kiota plugin add` and `kiota plugin generate` (with `-t APIPlugin`) emitted attacker-controlled static_template.file values from x-ai-adaptive-card and x-ai-capabilities into generated Microsoft 365 Copilot and Teams plugin manifests without path validation, allowing ../, absolute, rooted, UNC, Windows drive, or URI paths in response_semantics.static_template.file to cause path traversal or out-of-package file inclusion when the generated plugin was deployed. This issue is fixed in version 1.29.1 and 1.32.5.

microsoft o365-moodle

The Microsoft 365 and Microsoft Entra ID Plugins for Moodle provide Office 365 and Azure Active Directory integration for Moodle. Prior to 4.5.6, 5.0.5, and 5.1.1, the Microsoft Office 365 Integration plugin local_o365 Teams SSO endpoint sso_login.php base64-decodes a JWT payload and authenticates users from the upn claim without verifying the JWT signature, allowing an unauthenticated attacker to forge a token and obtain a Moodle session as an O365-authenticated user. This issue is fixed in versions 4.5.6, 5.0.5, and 5.1.1.

kopia

Kopia is a cross-platform backup tool for Windows, macOS, and Linux with fast incremental backups, client-side end-to-end encryption, compression, and data deduplication. Prior to 0.23.0, Kopia's HTTP server started with --without-password accepts unauthenticated requests to /api/v1/repo/exists and forwards attacker-supplied SFTP storage configuration to blob.NewStorage, where externalSSH: true and sshArguments containing -oProxyCommand=<cmd> can cause exec.CommandContext("ssh") to invoke the command through OpenSSH. This issue is fixed in version 0.23.0.

SGLang · Lmsys sglang

SGLang uses an expert-parallel backup subsystem that exposes a ZeroMQ PULL socket on a routable network interface that does not contain authentication or deserialization safeguards, allowing an attacker to provide a malicious pickle file that results in unauthenticated remote code execution when the feature is enabled and the service is reachable over the network.

HCL Software DFXAnalytics · Hcltech dfxanalytics

HCL DFXAnalytics is affected by an Account Takeover via Response Manipulation vulnerability. A remote attacker can intercept and alter the contents of the server's HTTP responses before they reach the client application, allowing them to manipulate the authentication or authorization logic to bypass controls and gain unauthorized access to targeted user accounts.

Canonical ubuntu-pro-client (ubuntu-advantage-tools) · Canonical Ubuntu 26.04 LTS · Canonical Ubuntu 24.04 LTS · Canonical Ubuntu 22.04 LTS

An input validation and injection vulnerability exists in Canonical ubuntu-pro-client (formerly ubuntu-advantage-tools). The client constructs APT source files (such as /etc/apt/sources.list.d/ubuntu-.list or their DEB822 equivalents) using data received directly from the contract server response via the directives.suites[] and directives.aptURL fields. Because the client utilizes Python's str.format() to write these files without performing escaping, validation, or newline character filtering, a malicious or tampered contract response containing embedded newline (\n) characters can successfully inject arbitrary, attacker-controlled deb configuration lines into root-owned APT sources. When combined with the unvalidated additionalPackages[] field—which is passed positionally into a root-executed apt-get install command—an attacker capable of spoofing or manipulating the contract response (e.g., via a compromised internal infrastructure, an intercepted connection utilizing a trusted CA, or local logical bugs) can force the client to fetch and install malicious packages. This ultimately leads to arbitrary code execution with root privileges on the affected system. This component is preinstalled on supported Ubuntu Server releases and auto-attaches by default on cloud provider Ubuntu Pro images.

X-Rite MA-T6

An unauthenticated remote attacker is able to perform remote code execution due to incorrectly sanitized user input in the SetParameter command.

X-Rite MA-T6

An unauthenticated remote attacker can execute any command on the affected device due to not correctly verifying the origin of a communication channel.

Spring Security Spring Authorization Server · Broadcom spring authorization server

Authentication bypass by primary weakness vulnerability in Spring Security Spring Authorization Server. This issue affects Spring Authorization Server: from 7.0.0 through 7.0.4, from 1.5.0 through 1.5.6, from 1.4.0 through 1.4.9, from 1.3.0 through 1.3.10.

Snowflake Connector for Python

Improper TLS hostname verification in Snowflake Connector for Python versions prior to 4.7.1 and 3.18.1 may have allowed a network-positioned attacker to bypass certificate hostname validation on HTTPS connections made by the connector. An attacker with on-path network access could exploit this by intercepting or redirecting network traffic and presenting a certificate signed by any trusted CA for any domain, causing the connector to accept connections without validating that the certificate matched the requested hostname. Successful exploitation requires an on-path traffic interception capability (e.g. ARP/DNS poisoning, rogue access point, BGP hijacking, or malicious proxy/exit node). This vulnerability may have exposed credentials, query data, and staged file contents to interception and tampering, and may have enabled the attacker to issue arbitrary SQL within the context of the victim's connector session. Impact is limited by the privileges of the affected Snowflake role. The fix is available in Snowflake Connector for Python versions 4.7.1 and 3.18.1. Users must manually upgrade.

Unknown Happy Coders OTP Login for WooCommerce

The Happy Coders OTP Login for WooCommerce WordPress plugin before 2.8 does not verify that a one-time password was actually validated before authenticating a user based on a supplied identifier, allowing unauthenticated attackers to log in as any existing user, including administrators, as well as to create new accounts.

cyberlord92 SAML Single Sign On – SSO Login

The SAML Single Sign On – SSO Login plugin for WordPress is vulnerable to Authentication Bypass via SAML Signature Algorithm Confusion in all versions up to, and including, 5.4.3. The vulnerability exists because `Mo_SAML_Utilities::mo_saml_cast_key()` reads the `SignatureMethod` Algorithm attribute directly from the attacker-controlled `SAMLResponse` parameter rather than enforcing the locally configured algorithm, causing the plugin to recast the IdP's RSA public key as an HMAC-SHA1 shared secret and validate the forged signature against it. This makes it possible for unauthenticated attackers to forge a SAML assertion targeting any WordPress account — including administrators — obtain valid WordPress authentication cookies, and achieve full administrator-level account takeover.

wekan

Wekan is open source kanban built with Meteor. Prior to 9.46, header-login with HEADER_LOGIN_TRUSTED_IPS uses getRequestIp() in server/lib/headerLoginAuth.js to trust the client-supplied X-Forwarded-For header before the real socket address, allowing an unauthenticated attacker to send HEADER_LOGIN_ID for any username and receive a meteor_login_token session, including for admin. This issue is fixed in version 9.46.

whyour qinglong

Qinglong is a timed task management platform supporting Python3, JavaScript, Shell, and Typescript. Prior to 2.20.1, the init guard middleware in back/loaders/express.ts checks /api/user/init but not /open/user/init, while rewrite('/open/*', '/api/$1') rewrites the whitelisted /open/* path after JWT authentication and the guard have passed; an unauthenticated attacker can send PUT /open/user/init to reset administrator credentials on an initialized instance. This issue is fixed in 2.20.1.

WWBN AVideo

WWBN AVideo is an open source video platform. Versions prior to 29.0 contain a stored DOM Cross-Site Scripting vulnerability in the YPTSocket plugin. Any unauthenticated remote attacker can execute arbitrary JavaScript in the authenticated origin of every administrator currently viewing a page that renders the YPTSocket online-users debug panel. plugin/YPTSocket/getWebSocket.json.php issues a signed WebSocket token to any anonymous caller, and MessageSQLiteV2::onOpen at plugin/YPTSocket/MessageSQLiteV2.php lines 91 and 110 reads the attacker-controlled webSocketSelfURI and page_title query parameters from the WebSocket connection URL with no validation. Both values persist into the in-memory SQLite connections table and broadcast inside the users_id_online array sent to every connected client; on the client, plugin/YPTSocket/script.js::updateSocketUserCard interpolates the broadcast page_title into an HTML template literal that is passed to jQuery $.append(html), which parses attacker bytes into live DOM nodes including <img> with inline event handlers. Successful attackers can can read non-HttpOnly cookies and the CSRF token rendered into the admin dashboard, issue authenticated requests to any admin-only endpoint, exfiltrate the admin dashboard DOM, and chain into any admin-context mutation. When the victim is an AVideo administrator, the attacker turns a single anonymous WebSocket connection into full administrative takeover via the admin's own session. This issue has been patched by https://github.com/WWBN/AVideo/commit/8be71e53ccbe9b84b30870db386fb4d2b11e1c16.

wekan

Wekan is open source kanban built with Meteor. Prior to 9.32, the Wekan Accounts.onCreateUser hook in server/models/users.js merges OIDC logins into existing accounts when the OIDC email or username matches an existing Wekan user, without verifying ownership or checking email_verified. An attacker using an OIDC provider account with a victim's email or username can cause Wekan to merge the attacker's OIDC credentials into the victim account and then log in as that account. This issue is fixed in version 9.32.

wekan

Wekan is open source kanban built with Meteor. Prior to 9.07, Wekan avatar upload functionality embeds user-supplied filenames into paths later passed to child_process.exec() for MIME-type detection. Because models/avatars.js and models/fileValidation.js used a shell command with the avatar filename, shell metacharacters such as backticks and $() in the filename could execute commands on the server. This issue is fixed in version 9.07.

LiteLLM 1.18.10 contains a remote code execution vulnerability in its MCP server creation functionality. The application allows users to add MCP servers via a JSON configuration specifying arbitrary command and args values. LiteLLM executes these values on the host without validation, enabling attackers to run arbitrary operating system commands. Successful exploitation may result in remote code execution with the privileges of the LiteLLM process.

xszyou Fay 4.3.1 contains a remote code execution vulnerability in its MCP STDIO server management and command execution handling. A remote attacker can access the publicly exposed MCP management interface and configure an MCP STDIO server with attacker-controlled commands and parameters, resulting in execution of arbitrary commands on the server. Successful exploitation allows arbitrary command execution within the context of the Fay service.

A Cross-Site Request Forgery (CSRF) vulnerability exists in the xxl-job-admin web application v.3.0.0 that allows an attacker to perform unauthorized modifications to Glue IDE shell scripts. The affected endpoint lacks proper CSRF token validation and accepts arbitrary HTTP methods via a permissive request mapping

An issue in Open Source GPT Researcher v3.3.7 allows attackers to execute arbitrary commands on a victim system via user interaction with a crafted HTML page.

czlonkowski n8n-mcp · N8n-mcp n8n-mcp

n8n-MCP is an MCP server that provides AI assistants access to n8n node documentation, properties, and operations. Prior to 2.56.1, in HTTP mode with multi-tenancy enabled through ENABLE_MULTI_TENANT=true, n8n-mcp's local workflow version history backups were not isolated per tenant, allowing an authenticated tenant to read workflow version snapshots belonging to other tenants and delete or destroy other tenants' stored backups, including full node definitions, credential references, and authorization headers. This issue is fixed in version 2.56.1.

nocobase

NocoBase is an AI-powered no-code/low-code platform for building business applications and enterprise solutions. Prior to 2.0.61, NocoBase @nocobase/plugin-notification-in-app-message exposed GET /api/myInAppChannels:list, where the filter[latestMsgReceiveTimestamp][$lt] value was inserted into a Sequelize.literal() template string without escaping or parameter binding, allowing a signed-up authenticated user to run stacked PostgreSQL statements and potentially execute commands with COPY ... TO PROGRAM. This vulnerability is fixed in 2.0.61.

Buffer Overflow vulnerability in Tenda AC10 v3 (firmware V03.03.16.09) allows attackers to cause a permanent Denial of Service (DoS) or potentially execute remote code via the /cgi-bin/UploadCfg endpoint

decolua 9router

9Router is an AI router & token saver. From 0.2.21 until 0.4.44, 9Router used the hardcoded fallback JWT secret 9router-default-secret-change-me in src/app/api/auth/login/route.js, src/middleware.js, and later src/lib/auth/dashboardSession.js, allowing attackers to forge an auth_token cookie when JWT_SECRET was unset. This issue is fixed in version 0.4.44

decolua 9router

9Router is an AI router & token saver. From 0.4.30 until 0.4.37, 9Router's src/proxy.js middleware did not protect /api/cli-tools/* and /api/mcp/*, allowing unauthenticated registration of customPlugins through src/app/api/cli-tools/cowork-settings/route.js and command execution through the MCP bridge. This vulnerability is fixed in 0.4.37.

dataease

DataEase is an open source data visualization and analysis tool. Prior to 2.10.23, DataEase enterprise token handling can let TokenFilter#doFilter() pass X-DE-TOKEN values to TokenUtils.validate(), which checks only token presence and length before userBOByToken(token) uses JWT.decode() without signature verification, allowing forged tokens with chosen uid and oid values to be accepted when licenseValid=true. This issue is fixed in version 2.10.23.

dataease

DataEase is an open source data visualization and analysis tool. Prior to 2.10.23, DataEase Redshift datasource connections can load attacker-controlled rsjdbc.ini configuration from System.getProperty("java.io.tmpdir"), setting socketFactory=org.springframework.context.support.FileSystemXmlApplicationContext so com.amazon.redshift.Driver#connect, com.amazon.redshift.Driver#getJdbcIniFile, and com.amazon.redshift.util.ObjectFactory#instantiate execute a reflection-based remote code execution chain during a normal JDBC connection through io.dataease.datasource.type.Redshift. This issue is fixed in version 2.10.23.

cap-js @cap-js/sqlite · cap-js @cap-js/postgres · @cap-js/db-service

The SAP Cloud Application Programming Model is a tool for building enterprise-grade cloud applications, and cap-js/cds-dbs is the monorepo for SQL database services for that tool. On April 29, 2026, compromised versions of `@cap-js/sqlite@2.2.2`, `@cap-js/postgres@2.2.2`, and `@cap-js/db-service@2.10.1` were published. The malicious packages harvested credentials and attempted self-propagation. If a compromised version was installed, all credentials accessible on that machine (npm tokens, cloud provider credentials, SSH keys, GitHub PATs) should be considered compromised. User should upgrade to `@cap-js/sqlite` >= 2.4.0, `@cap-js/postgres` >= 2.3.0, `@cap-js/db-service` >= 2.11.0. If a compromised version was ever installed, rotate all affected credentials. No known workarounds are available.