Dimanche 19 juillet 2026

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix null pointer dereference in proc_show_files() When a SMB2 client opens a file with a durable v2 handle and then issues SMB2 SESSION_LOGOFF, session_fd_check() clears fp->tcon = NULL on the reconnectable file pointer but leaves the fp registered in global_ft.idr until the durable scavenger fires (up to fp->durable_timeout seconds later). During that window any read of /proc/fs/ksmbd/files (mode 0400) panics the kernel because proc_show_files() walks global_ft.idr and unconditionally dereferences fp->tcon->id with no NULL guard. Reproducer requires only a successful SMB2 SESSION_SETUP and a share configured with 'durable handles = yes'. KASAN report on mainline 70390501d194: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:proc_show_files+0x118/0x740 Call Trace: proc_show_files+0x118/0x740 seq_read_iter+0x4ef/0xe10 proc_reg_read_iter+0x1b7/0x280 ... Guard the dereference. A durable-disconnected fp legitimately has no tcon; report its tree id as 0 rather than oopsing.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix DATA decrypt vs splice() by copying data to buffer in recvmsg This improves the fix for CVE-2026-43500. Fix the pagecache corruption from in-place decryption of a DATA packet transmitted locally by splice() by getting rid of the packet sharing in the I/O thread and unconditionally extracting the packet content into a bounce buffer in which the buffer is decrypted. recvmsg() (or the kernel equivalent) then copies the data from the bounce buffer to the destination buffer. The sk_buff then remains unmodified. This has an additional advantage in that the packet is then arranged in the buffer with the correct alignment required for the crypto algorithms to process directly. The performance of the crypto does seem to be a little faster and, surprisingly, the unencrypted performance doesn't seem to change much - possibly due to removing complexity from the I/O thread. Yet another advantage is that the I/O thread doesn't have to copy packets which would slow down packet distribution, ACK generation, etc.. The buffer belongs to the call and is allocated initially at 2K, sufficiently large to hold a whole jumbo subpacket, but the buffer will be increased in size if needed. However, to take this work, MSG_PEEK may cause a later packet to be decrypted into the buffer, in which case the earlier one will need re-decrypting for a subsequent recvmsg(). Note that rx_pkt_offset may legitimately see 0 as a valid offset now, so switch to using USHRT_MAX to indicate an invalid offset. Note also that I would generally prefer to replace the buffers of the current sk_buff with a new kmalloc'd buffer of the right size, ditching the old data and frags as this makes the handling of MSG_PEEK easier and removes the re-decryption issue, but this looks like quite a complicated thing to achieve. skb_morph() looks half way to what I want, but I don't want to have to allocate a new sk_buff.

Linux

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: fix UAF in hci_le_create_cis_sync hci_le_create_cis_sync() dereferences conn->conn_timeout after releasing both rcu_read_lock() and hci_dev_lock(hdev). The conn pointer was obtained from an RCU-protected iteration over hdev->conn_hash.list and is not valid once these locks are dropped. A concurrent disconnect can free the hci_conn between the unlock and the dereference, causing a use-after-free read. The cancellation mechanism in hci_conn_del() cannot prevent this because hci_le_create_cis_pending() queues hci_create_cis_sync with data=NULL: hci_cmd_sync_queue(hdev, hci_create_cis_sync, NULL, NULL); While hci_conn_del() dequeues with data=conn: hci_cmd_sync_dequeue(hdev, NULL, conn, NULL); Since NULL != conn, the lookup in _hci_cmd_sync_lookup_entry() never matches, and the pending work item is not cancelled. Fix this by saving conn->conn_timeout into a local variable while the locks are still held, so the stale conn pointer is never dereferenced after unlock. This is the same class of bug as the one fixed by commit 035c25007c9e ("Bluetooth: hci_sync: Fix UAF on le_read_features_complete") which addressed the identical pattern in a different function. This vulnerability was identified using 0sec.ai, an open-source automated security auditing platform (https://github.com/0sec-labs).

Linux

In the Linux kernel, the following vulnerability has been resolved: macsec: fix replay protection at XPN lower-PN wrap In macsec_post_decrypt(), when pn is U32_MAX, pn + 1 overflows u32 to 0 and the first branch never fires. If next_pn_halves.lower is also in the upper half, pn_same_half(pn, lower) is true and the XPN else-if does not fire either, leaving next_pn_halves unchanged. An attacker that captures the legitimate frame carrying pn == 0xFFFFFFFF on an XPN association can then replay it indefinitely, since lowest_pn never rises above the captured pn and macsec_decrypt() reconstructs the same IV. Extend the XPN else-if to also fire when pn + 1 wraps to 0, so receipt of pn == U32_MAX advances next_pn_halves to (upper + 1, 0).

Linux

In the Linux kernel, the following vulnerability has been resolved: f2fs: bound i_inline_xattr_size for non-inline-xattr inodes When the flexible_inline_xattr feature is enabled, do_read_inode() loads the on-disk i_inline_xattr_size unconditionally: if (f2fs_sb_has_flexible_inline_xattr(sbi)) fi->i_inline_xattr_size = le16_to_cpu(ri->i_inline_xattr_size); but sanity_check_inode() only range-checks it when the inode also has the FI_INLINE_XATTR flag set. An inode that carries an inline dentry or inline data but not FI_INLINE_XATTR -- the normal layout for an inline directory -- therefore keeps a fully attacker-controlled i_inline_xattr_size from a crafted image. get_inline_xattr_addrs() returns that value with no flag gating, so it feeds the inode geometry: MAX_INLINE_DATA() = 4 * (CUR_ADDRS_PER_INODE - i_inline_xattr_size - 1) NR_INLINE_DENTRY() = MAX_INLINE_DATA() * BITS_PER_BYTE / (...) addrs_per_page() = CUR_ADDRS_PER_INODE - i_inline_xattr_size A large i_inline_xattr_size drives MAX_INLINE_DATA() and NR_INLINE_DENTRY() negative, so make_dentry_ptr_inline() sets d->max (int) to a negative value. The inline directory walk then compares an unsigned long bit_pos against that negative d->max, which is promoted to a huge unsigned bound, and reads far past the inline area: while (bit_pos < d->max) /* fs/f2fs/dir.c */ ... test_bit_le(bit_pos, d->bitmap) / d->dentry[bit_pos] ... Mounting a crafted image and reading such a directory triggers an out-of-bounds read in f2fs_fill_dentries(); the same underflow also corrupts ADDRS_PER_INODE for regular files. Validate i_inline_xattr_size against MAX_INLINE_XATTR_SIZE whenever the flexible_inline_xattr feature is enabled -- i.e. whenever the value is loaded from disk and consumed -- and keep the lower MIN_INLINE_XATTR_SIZE bound gated on inodes that actually carry an inline xattr, so legitimate inodes with i_inline_xattr_size == 0 are still accepted.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ksmbd: reject non-VALID session in compound request branch smb2_check_user_session() takes a shortcut for any operation that is not the first in a COMPOUND request: it reuses work->sess (the session bound by the first operation) and validates only the SessionId, then returns "valid". It never re-checks work->sess->state == SMB2_SESSION_VALID, and a SessionId of 0xFFFFFFFFFFFFFFFF (ULLONG_MAX, the MS-SMB2 related-operation value) skips even the id comparison. The standalone path (ksmbd_session_lookup_all() plus the SESSION_SETUP state machine) does enforce the VALID state; the compound branch bypasses all of it. A SESSION_SETUP carrying only an NTLM Type-1 (NtLmNegotiate) blob publishes a fresh SMB2_SESSION_IN_PROGRESS session whose sess->user is still NULL (->user is assigned later, by ntlm_authenticate()). Used as operation 1 of a COMPOUND with operation 2 = TREE_CONNECT (related, SessionId=ULLONG_MAX, \\host\IPC$), the tree-connect then runs on that IN_PROGRESS session and reaches ksmbd_ipc_tree_connect_request(), which dereferences user_name(sess->user) with sess->user == NULL (transport_ipc.c:687/701/704) -> remote NULL-pointer dereference and a kernel Oops that wedges the ksmbd worker for all clients. Reject any non-first compound operation that lands on a session which is not SMB2_SESSION_VALID, mirroring the validity the standalone lookup path enforces. SESSION_SETUP itself legitimately runs on an IN_PROGRESS session, but it is never carried as a non-first compound operation, so multi-leg authentication is unaffected by this check.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: udf: reject descriptors with oversized CRC length udf_read_tagged() skips CRC verification when descCRCLength + sizeof(struct tag) exceeds the block size. A crafted UDF image can set descCRCLength to an oversized value to bypass CRC validation entirely; the descriptor is then accepted based solely on the 8-bit tag checksum, which is trivially recomputable. Reject such descriptors instead of silently accepting them. A legitimate single-block descriptor should never have a CRC length that exceeds the block.