Semaine du 1 juin au 7 juin 2026
1 619 CVE
-
CVE-2026-11460 7.3 Élevée
Boost Serialization
A flaw has been found in Boost Serialization up to 1.91. The impacted element is an unknown function. This manipulation causes improper validation of specified type of input. It is possible to initiate the attack remotely. The exploit has been published and may be used. The maintainer was notified on Aug 2025 and a disclosure deadline was set for 90 days. The maintainer acknowledged but postponed indefinitely citing time concerns. No patch is currently available and the disclosure deadline has expired.
-
CVE-2026-49494 7.5 Élevée
Xcitium (formerly Comodo Security Solutions) Comodo Internet Security · Xcitium Client Security (XCS)
Xcitium Client Security (XCS) before 13.8.2.10019 and Comodo Internet Security (CIS) through 12.3.4.8162 (fix expected by 2026 Q3) contain an integer underflow vulnerability in the firewall driver Inspect.sys that allows remote unauthenticated attackers to crash the system by sending a crafted IPv6 packet with a declared payload length smaller than the sum of its extension-header lengths. The unsigned 64-bit payload-length value underflows to a near-maximal integer, triggering an out-of-bounds read and oversized memcpy in the Windows kernel at DISPATCH_LEVEL, resulting in a blue screen of death even on hosts with all ports blocked.
-
CVE-2026-11459 3.3 Faible
SecureAge CatchPulse
A security vulnerability has been detected in SecureAge CatchPulse up to 10.9.3. Impacted is an unknown function in the library saappctl.sys of the component IOCTL Handler. The manipulation leads to information disclosure. Local access is required to approach this attack. The exploit has been disclosed publicly and may be used.
-
CVE-2026-11458 5.3 Moyenne
erzhongxmu JeeWMS
A weakness has been identified in erzhongxmu JeeWMS up to 141740afb2ba14d441c82a833d0a418d07ca2d69. This issue affects some unknown processing of the file /base-boot/actuator of the component Boot Actuator Endpoint. Executing a manipulation can lead to information disclosure. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-11457 7.3 Élevée
erzhongxmu JeeWMS
A security flaw has been discovered in erzhongxmu JeeWMS up to 141740afb2ba14d441c82a833d0a418d07ca2d69. This vulnerability affects unknown code of the file /base-boot/jmreport/testConnection of the component JimuReport test-connection Endpoint. Performing a manipulation of the argument dbType/dbDriver/dbUrl/dbUsername/dbPassword results in injection. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-11456 7.3 Élevée
Chanjet CRM
A vulnerability was identified in Chanjet CRM 1.0. This affects an unknown part of the file /tools/jxf_dump_systable.php of the component HTTP GET Request Handler. Such manipulation of the argument gblOrgID leads to sql injection. The attack may be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-11455 5.0 Moyenne
FoundationAgents MetaGPT
A vulnerability was determined in FoundationAgents MetaGPT up to 0.8.2. Affected by this issue is the function check_cmd_exists of the file metagpt/utils/common.py. This manipulation of the argument mermaid.path causes command injection. The attack may be initiated remotely. A high degree of complexity is needed for the attack. The exploitation is known to be difficult. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet.
-
CVE-2026-11453 6.3 Moyenne
Tiobon Employee Self-Service System
A vulnerability was found in Tiobon Employee Self-Service System up to 7.2. Affected by this vulnerability is an unknown functionality of the file /Blog/BlogSearch.aspx of the component Login Endpoint. The manipulation of the argument Keyword results in sql injection. The attack can be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-11452 7.3 Élevée
GL.iNet GL-MT3000
A vulnerability has been found in GL.iNet GL-MT3000 up to 4.4.5. Affected is the function FUN_0042e200 of the file /cgi-bin/glc of the component SET_USER_PWD Handler. The manipulation of the argument Password leads to command injection. The attack can be initiated remotely. Upgrading to version 4.8.1 is able to address this issue. The affected component should be upgraded. The vendor explains: " The current code escapes single quotes in the password parameter and handles it inside a shell single‑quote context. The payloads in the report, which rely on $() or backticks to trigger command substitution, are not executed under the current code path. We tested on a GL‑MT3000 device running firmware 4.8.1 using similar payloads, and no command‑execution marker file was created."
-
CVE-2026-11451 7.3 Élevée
GL.iNet GL-MT3000
A flaw has been found in GL.iNet GL-MT3000 4.4.5. This impacts the function snprintf of the file /cgi-bin/glc of the component FTP Protocol Handler. Executing a manipulation of the argument media_dir can lead to command injection. It is possible to launch the attack remotely. Upgrading to version 4.8.1 will fix this issue. You should upgrade the affected component. The vendor explains: "In version 4.8.1, before writing media_dir to the FTP configuration command, the code escapes single quotes using escape_single_quote(). The payloads in the report—which rely on closing a single quote, appending commands with a semicolon, and commenting out the tail with #—cannot escape execution under the current code path. We also verified this on a GL‑MT3000 device running firmware version 4.8.1 using similar payloads calling the /NAS_API_SET_PROTO_CONFIG interface. Although the interface returned success, the marker file intended to prove command execution was not created; the payload was written into /etc/vsftpd.conf only as ordinary configuration content and did not trigger any shell command execution. Therefore, with the current firmware version and default runtime environment, we could not reproduce the claimed “unauthorized command injection in set_proto_config”."
-
CVE-2026-11450 7.3 Élevée
GL.iNet GL-MT3000
A vulnerability was detected in GL.iNet GL-MT3000 4.4.5. This affects the function dlopen in the library /usr/lib/oui-httpd/rpc/ of the component Path Normalization Handler. Performing a manipulation of the argument dev_name results in command injection. It is possible to initiate the attack remotely. Upgrading to version 4.7 mitigates this issue. It is advisable to upgrade the affected component. The vendor confirms: " From version 4.7 onward, we have enabled method‑level validation at the HTTP /rpc layer. nas‑web.eject_disk is no longer in the whitelist of allowed methods. Consequently, directly calling eject_disk through the default /rpc endpoint returns Invalid params, preventing entry into subsequent dangerous functions and blocking the remote exploit chain described in the report."
-
CVE-2026-11449 6.3 Moyenne
GL.iNet GL-MT3000
A security vulnerability has been detected in GL.iNet GL-MT3000 4.4.5. The impacted element is the function rpc_sys of the file /cgi-bin/luci/rpc of the component LuCI JSON-RPC Interface. Such manipulation leads to command injection. The attack may be performed from remote. Upgrading to version 4.8.1 is sufficient to resolve this issue. Upgrading the affected component is advised. The vendor confirms: "The issue discovered by the vulnerability researcher on older firmware versions(4.4.5) has actually been fixed and mitigated in the new version. According to the latest firmware fixes, by default, firmware versions after 4.7.13 do not install LuCI, so this vulnerability cannot be exploited."
-
CVE-2026-11448 4.7 Moyenne
GL.iNet GL-MT3000
A weakness has been identified in GL.iNet GL-MT3000 up to 4.4.5. The affected element is the function realpath of the file /rpc of the component Minidlna Service. This manipulation of the argument kube. set causes command injection. The attack is possible to be carried out remotely. Upgrading to version 4.7 is sufficient to fix this issue. It is recommended to upgrade the affected component. The vendor confirms: "Starting from version 4.7, SDK has added global protection to intercept malicious injection".
-
CVE-2026-11447 6.3 Moyenne
GL.iNet GL-MT3000
A security flaw has been discovered in GL.iNet GL-MT3000 up to 4.4.5. Impacted is the function iwinfo_backend of the file iwinfo.so of the component MTK Backend. The manipulation of the argument device results in command injection. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. Upgrading to version 4.7 is recommended to address this issue. Upgrading the affected component is recommended. The vendor confirms: "Starting from version 4.7, SDK has added global protection to intercept malicious injection".
-
CVE-2026-26422 8.4 Élevée
Clash Verge Rev clash-verge-service-ipc
clash-verge-service-ipc before 2.3.0 has a world-reachable IPC endpoint, leading to local privilege escalation.
-
Rejected reason: DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue. Notes: none.
-
CVE-2026-11441 6.3 Moyenne
theonedev onedev
A vulnerability was identified in theonedev onedev up to 15.0.5. This vulnerability affects the function canAccessIssue of the file /issues/ of the component Pull Request Handler. Such manipulation of the argument issue leads to improper authorization. It is possible to launch the attack remotely. Upgrading to version 15.0.6 is able to resolve this issue. It is advisable to upgrade the affected component.
-
CVE-2026-11440 6.3 Moyenne
theonedev onedev
A vulnerability was determined in theonedev onedev up to 15.0.5. This affects an unknown part of the file /repositories/{projectId}/default-branch of the component REST API. This manipulation of the argument project.defaultBranch causes improper authorization. It is possible to initiate the attack remotely. Upgrading to version 15.0.6 is able to mitigate this issue. Upgrading the affected component is advised.
-
CVE-2026-11439 6.3 Moyenne
theonedev onedev
A vulnerability was found in theonedev onedev up to 15.0.5. Affected by this issue is some unknown functionality of the file /projects/ of the component Parent Project Handler. The manipulation of the argument project.parentId results in improper authorization. The attack may be performed from remote. Upgrading to version 15.0.6 can resolve this issue. It is recommended to upgrade the affected component.
-
CVE-2026-11438 6.3 Moyenne
theonedev onedev
A vulnerability has been found in theonedev onedev up to 15.0.5. Affected by this vulnerability is an unknown functionality of the file /projects. The manipulation of the argument project.forkedFromId leads to improper authorization. The attack is possible to be carried out remotely. Upgrading to version 15.0.6 addresses this issue. Upgrading the affected component is recommended.
-
CVE-2026-11437 7.3 Élevée
perfree go-fastdfs-web
A flaw has been found in perfree go-fastdfs-web up to 1.3.7. Affected is the function checkServer of the file /install/checkServer of the component Installation Endpoint. Executing a manipulation can lead to server-side request forgery. The attack can be executed remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-11436 4.3 Moyenne
Mage AI
A vulnerability was detected in Mage AI up to 0.9.79. This impacts the function useMutation of the file mage_ai/frontend/components/Sessions/SignForm/index.tsx of the component Sign-in Flow. Performing a manipulation of the argument query.redirect_url results in cross site scripting. Remote exploitation of the attack is possible. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-11435 7.3 Élevée
Jinher OA
A security vulnerability has been detected in Jinher OA 1.0. This affects an unknown function of the file nextselectplan.aspx. Such manipulation of the argument httpOID leads to sql injection. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-11434 2.4 Faible
FluentCMS
A weakness has been identified in FluentCMS 0.0.5. The impacted element is an unknown function of the file /admin/blocks of the component Blocks Plugin. This manipulation causes cross site scripting. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-11413 8.8 Élevée
JingDong JD Cloud Box AX6600
A security vulnerability has been detected in JingDong JD Cloud Box AX6600 4.5.3.r4546. The impacted element is the function set_macfilter of the file /sbin/jdcweb_rpc. The manipulation leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-11412 6.3 Moyenne
Jinher OA
A weakness has been identified in Jinher OA C6. The affected element is an unknown function of the file /C6/JHSoft.Web.ModuleCount/GetFormSn.aspx. Executing a manipulation of the argument queryID can lead to sql injection. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-11411 4.4 Moyenne
iAI Lab PDF AI App
A security flaw has been discovered in iAI Lab PDF AI App 4.21.0 on Android. Impacted is the function getExternalCacheDir of the component chatpdf.pro. Performing a manipulation of the argument _display_name results in path traversal. The attack requires a local approach. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-11408 6.3 Moyenne
vertex-app vertex
A vulnerability was identified in vertex-app vertex up to 2026.02.12. This issue affects some unknown processing of the file app/model/LogMod.js of the component Log Viewer Endpoint. Such manipulation of the argument req.query leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used. The name of the patch is 805d82e7100d49b79b3beb1b9420e8e458987198. It is best practice to apply a patch to resolve this issue.
-
CVE-2026-11406 6.3 Moyenne
GL.iNet MT3000
A vulnerability was determined in GL.iNet MT3000 up to 4.4.5. This vulnerability affects unknown code of the file ovpnclient.sh of the component OpenVPN Client Import Workflow. This manipulation causes command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. Upgrading to version 4.9.0_beta3-1012-0513-1778656146 is able to resolve this issue. You should upgrade the affected component. The vendor confirms: "This issue has been addressed by implementing malicious checks on OpenVPN configuration files to prevent command injection attacks carried through malicious configuration files."
-
CVE-2026-10725 7.5 Élevée
CRUX Protocol::HTTP2 · Crux protocol\
Protocol::HTTP2 versions before 1.13 for Perl is vulnerable to a HTTP/2 Bomb. Protocol::HTTP2's inbound HPACK path has no header-list size limit, so a small HTTP/2 request can expand into large server memory (the "HTTP/2 bomb"). The headers_decode method materialises a full key+value copy per indexed reference with no running size check, and the stream_header_block_add method appends (since version 1.12) every CONTINUATION frame to the per-stream buffer unbounded. MAX_HEADER_LIST_SIZE (default 65536) is advertised in SETTINGS but never consulted on decode. It is absent from the decoder and from the :limits export tag.
-
CVE-2026-9851 7.2 Élevée
masaakitanaka Booking Package
The Booking Package plugin for WordPress is vulnerable to Privilege Escalation via Account Takeover in versions up to, and including, 1.7.16. This is due to a missing capability check on the 'updateUser' branch of the package_app_action AJAX endpoint, where the handler only validates a nonce and the dispatcher invokes Schedule::updateUser() with the $administrator argument hard-coded to 1, bypassing the only owner-restriction check inside that function and allowing the target user to be determined solely by attacker-supplied input passed directly to wp_update_user(). This makes it possible for authenticated attackers, with Editor-level access and above, to change the email address and password of any account, including Administrator accounts, resulting in a full site takeover.
-
CVE-2026-9829 6.5 Moyenne
10web Photo Gallery by 10Web – Mobile-Friendly Image Gallery
The Photo Gallery by 10Web – Mobile-Friendly Image Gallery plugin for WordPress is vulnerable to time-based SQL Injection via 'compact_album_order_by' Shortcode Parameter in all versions up to, and including, 1.8.41 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with contributor-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. The malicious payload is stored via the 'shortcode_bwg' AJAX handler — accessible to Contributor-level users and exploitable without a valid nonce by omitting the 'page' parameter — and is subsequently triggered by the unauthenticated 'bwg_frontend_data' AJAX handler, meaning successful exploitation requires only that an attacker has Contributor-level access to save the shortcode.
-
CVE-2026-9594 4.4 Moyenne
flippercode WP Maps – Google Maps,OpenStreetMap,Mapbox,Store Locator,Listing,Directory & Filters
The WP Maps – Google Maps,OpenStreetMap,Mapbox,Store Locator,Listing,Directory & Filters plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'location_messages' parameter in all versions up to, and including, 4.9.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires the attacker to hold the custom wpgmp_manage_location capability, which is granted to administrators by default but can be assigned to lower-privileged roles via the plugin's Permissions screen.
-
CVE-2026-9016 5.3 Moyenne
qriouslad Debug Log Manager – Conveniently Monitor and Inspect Errors
The Debug Log Manager – Conveniently Monitor and Inspect Errors plugin for WordPress is vulnerable to Improper Output Neutralization for Logs in all versions up to, and including, 2.5.0. This is due to the `log_js_errors()` AJAX handler being registered for unauthenticated users via `wp_ajax_nopriv_log_js_errors` and gated only by a nonce that is publicly disclosed in every front-end page's HTML through `wp_localize_script()` whenever JavaScript error logging is enabled, providing no real authorization barrier. This makes it possible for unauthenticated attackers to inject arbitrary forged entries into the site's WordPress debug log by supplying attacker-controlled values for the `message`, `script`, `lineNo`, `columnNo`, and `pageUrl` fields — enabling spoofing of error and incident records, obscuring malicious activity within fabricated log noise, and misleading administrators who rely on the log for triage. This vulnerability is only exploitable when the plugin's JavaScript error logging feature is enabled, as the requisite nonce is only published into the page HTML under that condition.
-
CVE-2026-8839 5.3 Moyenne
chrisvrichardson MapPress Maps for WordPress
The MapPress Maps for WordPress plugin for WordPress is vulnerable to Authorization Bypass Through User-Controlled Key in all versions up to, and including, 2.96.6. This is due to missing ownership verification in the REST API routes registered via `Mappress_Api::rest_api_init()`, where the GET `/wp-json/mapp/v1/maps/{mapid}` endpoint uses `'permission_callback' => '__return_true'` and the write endpoints (POST update, DELETE, PATCH mutate, POST clone, POST empty_trash) only check the generic `edit_posts` capability without confirming that the requester owns the targeted map — a gap that is not compensated at the model layer, as `Mappress_Map::get()`, `save()`, `delete()`, `mutate()`, and `empty_trash()` all operate on any caller-supplied map ID without an ownership check. This makes it possible for unauthenticated attackers to read sensitive map data — including POI titles, addresses, coordinates, and body content — for any map on the site by enumerating map IDs, and for authenticated attackers with Contributor-level access and above to modify, delete, trash/restore, or clone any map regardless of its author.
-
CVE-2026-8611 4.3 Moyenne
klamra22 Klamra Paycal for Aspaclaria
The Klamra Paycal for Aspaclaria plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 1.1.4 via the 'invoice_id' parameter due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with subscriber-level access and above, to download arbitrary customer invoices by enumerating sequential post IDs, exposing sensitive billing PII including full name, email address, phone number, order total, line items, and customer notes belonging to other customers.
-
CVE-2026-7624 4.3 Moyenne
cifi SEO Plugin by Squirrly SEO
The SEO Plugin by Squirrly SEO plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 12.4.16. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with contributor-level access and above, to invoke privileged state-changing Squirrly cloud API operations, such as revoking the site's Google Search Console and Google Analytics integrations via `api/gsc/revoke` and `api/ga/revoke`, that are otherwise restricted to administrator-level users holding the `sq_manage_settings` capability.
-
CVE-2026-9280 6.1 Moyenne
spacetime Ad Inserter – Ad Manager & AdSense Ads
The Ad Inserter – Ad Manager & AdSense Ads plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via URL Parameters in iframe Mode in all versions up to, and including, 2.8.15 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. Exploitation requires that iframe mode (AI_OPTION_IFRAME) is enabled on at least one ad block displayed on the targeted page, which is a non-default but supported configuration commonly used for AdSense and JavaScript-based ads.
-
CVE-2026-9197 4.9 Moyenne
nextendweb Smart Slider 3
The Smart Slider 3 plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 3.5.1.36 via the replaceHTMLImage function. This makes it possible for authenticated attackers, with administrator-level access and above, to read the contents of arbitrary files on the server, which can contain sensitive information.
-
CVE-2026-8991 4.4 Moyenne
glenwpcoder Drag and Drop Multiple File Upload for Contact Form 7
The Drag and Drop Multiple File Upload for Contact Form 7 plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'drag_n_drop_text' and 'drag_n_drop_browse_text' Settings in all versions up to, and including, 1.3.9.7 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
-
CVE-2026-8978 4.9 Moyenne
crafium OptinCraft – Drag & Drop Optins & Popup Builder for WordPress
The OptinCraft – Drag & Drop Optins & Popup Builder for WordPress plugin for WordPress is vulnerable to generic SQL Injection via the 'order_by' parameter in all versions up to, and including, 1.2.0 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.
-
CVE-2026-8502 5.3 Moyenne
thimpress LearnPress – WordPress LMS Plugin for Create and Sell Online Courses
The LearnPress – WordPress LMS Plugin for Create and Sell Online Courses plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 4.3.6 via the 'return_type' parameter. This makes it possible for unauthenticated attackers to extract sensitive data including the plaintext post_password of password-protected courses and the full post_content, post_author, and post_name of unpublished draft, private, and pending courses via the unrestricted SELECT * fallback query. Exploitation requires supplying both c_status=all (to bypass the publish-only post_status WHERE clause) and return_type=json (to prevent the safe DISTINCT(ID) AS ID field override) in a single unauthenticated request to the /wp-json/lp/v1/courses/archive-course endpoint.
-
CVE-2026-7796 6.4 Moyenne
wpdevteam EmbedPress – PDF Embedder, Embed PDF viewer, YouTube Videos, 3D FlipBook, Social feeds & more
The EmbedPress – PDF Embedder, Embed PDF viewer, YouTube Videos, 3D FlipBook, Social feeds & more plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the block 'url' attribute in all versions up to, and including, 4.5.3 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page
-
CVE-2026-7795 6.4 Moyenne
holithemes Click to Chat – HoliThemes
The Click to Chat – WA Widget plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the [chat] shortcode 'num' parameter in all versions up to, and including, 4.38. This is due to insufficient escaping when embedding user-supplied shortcode attribute values inside JavaScript string literals that are then placed in HTML event-handler attributes. The CCW_Shortcode::shortcode() function applies esc_attr() to the 'num' parameter (line 157), which converts single quotes to the HTML entity '. This entity-encoded value is then interpolated directly into a JavaScript window.open() call string delimited by single quotes (line 194/221), and that complete string is placed verbatim into an HTML onclick attribute in the style template files (e.g., sc-style-1.php line 6). Because browsers HTML-decode event attribute values before executing the embedded JavaScript, the ' entities are decoded back to literal single quotes at runtime, allowing the injected payload to break out of the JavaScript string context and execute arbitrary code. This makes it possible for authenticated attackers with Contributor-level access and above to inject arbitrary web scripts into pages that will execute whenever a user clicks the WhatsApp chat button rendered by the [chat] shortcode.
-
CVE-2026-7792 5.3 Moyenne
smub WPForms – Easy Form Builder for WordPress – Contact Forms, Payment Forms, Surveys, & More
The WPForms – Easy Form Builder for WordPress – Contact Forms, Payment Forms, Surveys, & More plugin for WordPress is vulnerable to Insufficient Verification of Data Authenticity in versions up to and including 1.10.0.1. This is due to the PayPal Commerce webhook endpoint processing unauthenticated JSON webhook payloads without verifying that the request originated from PayPal using the required HMAC-SHA256 webhook signature, and only checking whether the supplied event_type is whitelisted before dispatching the attacker-controlled resource data to handlers that update payment records. This makes it possible for unauthenticated attackers who know a valid PayPal subscription_id to forge PayPal webhook events and modify subscription payment records, such as reactivating a cancelled or suspended subscription by setting its subscription_status to active.
-
CVE-2026-7665 5.3 Moyenne
wpdevteam Essential Addons for Elementor – Popular Elementor Templates & Widgets
The Essential Addons for Elementor – Popular Elementor Templates & Widgets plugin for WordPress is vulnerable to Information Exposure in all versions up to, and including, 6.6.4 via the ajax_load_more function due to insufficient restrictions on which posts can be included. This makes it possible for unauthenticated attackers to extract data from password protected, private, or draft posts that they should not have access to.
-
CVE-2026-7566 6.6 Moyenne
thimpress LearnPress – Backup & Migration Tool
The LearnPress – Backup & Migration Tool plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 4.1.4 via deserialization of untrusted input . This makes it possible for authenticated attackers, with administrator-level access and above, to inject a PHP Object. No known POP chain is present in the vulnerable software, which means this vulnerability has no impact unless another plugin or theme containing a POP chain is installed on the site. If a POP chain is present via an additional plugin or theme installed on the target system, it may allow the attacker to perform actions like delete arbitrary files, retrieve sensitive data, or execute code depending on the POP chain present.
-
CVE-2026-7565 4.9 Moyenne
thimpress LearnPress – Backup & Migration Tool
The LearnPress – Backup & Migration Tool plugin for WordPress is vulnerable to Arbitrary File Read via Directory Traversal in all versions up to, and including, 4.1.4 via the 'import-user-file' parameter parameter. This makes it possible for authenticated attackers, with administrator-level access and above, to read the contents of arbitrary files on the server, which can contain sensitive information.
-
CVE-2026-7537 7.2 Élevée
MDJM Event Management
The MDJM Event Management plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 1.7.8.3 via the mdjm_send_comm_email function. This is due to no file type, extension, or MIME type validation being performed on uploaded files. This makes it possible for authenticated attackers, with administrator-level access and above, to upload files that may be executable, which makes remote code execution possible.
-
CVE-2026-2500 4.4 Moyenne
davidfcarr Quick Playground
The Quick Playground plugin for WordPress is vulnerable to Path Traversal in all versions up to, and including, 1.3.4. This is due to the `qckply_data()` function passing the user-supplied `filename` POST parameter directly to `file_get_contents()` without any validation, sanitization, or path restriction. This makes it possible for authenticated attackers, with Administrator-level access and above, to read arbitrary files on the server, such as `wp-config.php` or `/etc/passwd`, which can contain sensitive information. Note: This vulnerability is only exploitable when the site has been synced with WordPress Playground (the `is_qckply_clone` option is set) or when running on `playground.wordpress.net`.
-
CVE-2026-9281 6.4 Moyenne
litonice13 Master Addons For Elementor – Widgets, Extensions, Theme Builder, Popup Builder & Template Kits
The Master Addons For Elementor – Widgets, Extensions, Theme Builder, Popup Builder & Template Kits plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'jtlma_custom_js' Page Setting (Custom JS Extension) in all versions up to, and including, 3.1.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The unfiltered_html capability check is only enforced during Elementor control registration (UI rendering) and not during the save process, enabling Author-level users to inject the jtlma_custom_js setting directly via a crafted POST request to admin-ajax.php?action=elementor_ajax, bypassing the UI-level restriction entirely.
-
CVE-2026-9008 4.3 Moyenne
webvitaly Page-list
The Page-list plugin for WordPress is vulnerable to Missing Authorization in all versions up to, and including, 6.2. This is due to the pagelist_unqprfx_ext_shortcode() function (the [pagelist_ext] / [pagelistext] shortcode) accepting attacker-controlled post_status, post_type, and show_meta_key attributes and passing them directly into get_pages() and get_post_meta() with no capability check verifying that the rendering user is permitted to read the matched objects. When the current post has no child pages, the shortcode re-issues the query with child_of => 0, broadening it to every page on the site matching the supplied status/type. This makes it possible for authenticated attackers, with contributor-level access and above, to disclose the titles, body content/excerpts, and arbitrary post meta of unrelated private and draft pages by inserting the shortcode into a contributor-authored draft and previewing it.
-
CVE-2026-8901 7.2 Élevée
plugcrux Integration for Freshsales – Contact Form 7, WPForms, Elementor, Gravity Forms and More
The Integration for Freshsales – Contact Form 7, WPForms, Elementor, Gravity Forms and More plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Form Submission Data in all versions up to, and including, 1.0.15 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The injected payload only executes when a CRM API call fails for the submitted form and an administrator subsequently views the error log details modal in the WordPress admin panel.
-
CVE-2026-8438 7.2 Élevée
davidanderson All-In-One Security (AIOS) – Security and Firewall
The All-In-One Security (AIOS) – Security and Firewall plugin for WordPress is vulnerable to Stored Cross-Site Scripting in versions up to and including 5.4.7. This is due to insufficient input sanitization in the get_rest_route() function and missing output escaping in the column_default() method of the debug log list table. When the 'Disable REST API for non-logged in users' feature (aiowps_disallow_unauthorized_rest_requests) is enabled alongside debug logging (aiowps_enable_debug), an unauthenticated attacker can embed arbitrary HTML or JavaScript in the REST request path. The path is retrieved via urldecode($_SERVER['REQUEST_URI']), which decodes URL-encoded payloads into literal HTML characters. This decoded, unsanitized value is concatenated directly into a debug log message and stored in the database. When an administrator navigates to the AIOS Dashboard Debug Logs page, the column_default() method returns the raw database value without escaping, and the parent list table echoes it directly, causing JavaScript execution in the administrator's browser session. This makes it possible for unauthenticated attackers to inject arbitrary web scripts that execute when an administrator views the debug log page, enabling nonce theft, privileged AJAX/REST actions, and potential full site compromise.
-
CVE-2026-9719 4.3 Moyenne
LatePoint – Calendar Booking Plugin for Appointments and Events
The LatePoint – Calendar Booking Plugin for Appointments and Events plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 5.6.0. This is due to missing or incorrect nonce validation on the change_status function. This makes it possible for unauthenticated attackers to change the status of arbitrary invoices — including marking unpaid invoices as paid — without administrator consent via a forged request granted they can trick a site administrator into performing an action such as clicking on a link.
-
CVE-2026-9290 7.5 Élevée
wpusermanager WP User Manager – User Profile Builder & Membership
The WP User Manager – User Profile Builder & Membership plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 2.9.17 via the (profile template scope) function. This makes it possible for unauthenticated attackers to include and execute arbitrary .php files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where .php file types can be uploaded and included.
-
CVE-2026-8976 4.3 Moyenne
themeisle RSS Aggregator by Feedzy – Feed to Post, Autoblogging, News & YouTube Video Feeds Aggregator
The RSS Aggregator by Feedzy – Feed to Post, Autoblogging, News & YouTube Video Feeds Aggregator plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 5.1.7. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with contributor-level access and above, to create and execute RSS import jobs, purge (force-delete) all posts associated with any import job, clear import error logs, and enumerate taxonomy terms and post meta_key names. The nonce required to reach these sub-handlers is leaked to any user with the edit_posts capability via the feedzyjs localized script injected into the block editor, meaning no privileged nonce theft or separate exploit step is required for Contributor-level users.
-
CVE-2026-8900 6.4 Moyenne
spyrosvl Simple SEO Slideshow
The Simple SEO Slideshow plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Shortcode Attributes in all versions up to, and including, 1.2.8 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. WordPress KSES does not strip malicious shortcode attribute values on post save, allowing contributor-level users to persist payloads that execute for any visitor, including administrators reviewing the post.
-
CVE-2026-8893 6.4 Moyenne
payaddons Express Payment For Stripe
The Express Payment For Stripe plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'type' attribute of the [stripe-express] shortcode in versions up to, and including, 1.28.0. This is due to insufficient input sanitization and output escaping on the shortcode attribute value, which is concatenated into an HTML attribute in the rendered output of the register_shortcode() function without being passed through esc_attr() or any other escaping function. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
-
CVE-2026-8608 5.3 Moyenne
awordpresslife Event Monster – Event Manager, Ticket Booking & Registration
The Event Monster – Event Management, Events Calendar, Tickets plugin for WordPress is vulnerable to Insufficient Verification of Data Authenticity in versions up to, and including, 2.1.0. This is due to the capture_payment() AJAX handler (registered via wp_ajax_nopriv_em_capture_payment) trusting client-supplied payment data — including transaction ID, amount, and payment status — without performing any server-side verification against the PayPal API or any other payment gateway, and without nonce or capability checks. This makes it possible for unauthenticated attackers to forge payment records, mark bookings as Completed, and obtain confirmation emails containing valid QR code tickets without making any actual payment.
-
CVE-2026-7047 4.3 Moyenne
absikandar Frontend User Notes
The Frontend User Notes plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 2.1.1. This is due to missing or incorrect nonce validation on the funp_ajax_modify_notes function. This makes it possible for unauthenticated attackers to trick a logged-in user into visiting a malicious page, causing unauthorized overwriting of that victim's own note content via a forged cross-site request to wp_update_post() via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. Due to ownership enforcement comparing the note's stored _funp_single_user_id meta against the current session's user ID, the attack is limited to modifying only notes belonging to the tricked victim, and cannot be used to alter notes owned by arbitrary third-party users.
-
CVE-2026-6448 4.9 Moyenne
expresstech Quiz and Survey Master (QSM) – Easy Quiz and Survey Maker
The Quiz and Survey Master (QSM) – Easy Quiz and Survey Maker plugin for WordPress is vulnerable to time-based blind SQL Injection via the 'order' parameter in all versions up to, and including, 11.1.2 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with admin-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. If the secret key is exposed, this can be exploited by lower-privileged users.
-
CVE-2026-6242 6.8 Moyenne
TP-Link Systems Inc. Tapo C520WS v2
An authenticated format string vulnerability exists in the ONVIF Subscribe service in Tapo C520WS v2 due to improper handling of externally supplied parameters within formatting functions. An attacker may inject crafted format strings into event subscription requests or notification generation path to disrupt normal service execution. Successful exploitation may cause the event notification service to terminate unexpectedly, resulting in the loss of real-time alarm functionality and disruption of event notifications.
-
CVE-2026-6241 6.8 Moyenne
TP-Link Systems Inc. Tapo C520WS v2
An authenticated format string vulnerability is present in the ONVIF AddScopes in Tapo C520WS v2, where user-controlled input is improperly passed to formatting functions without adequate sanitization. An attacker can inject format specifiers into ONVIF scope parameters to manipulate memory handling behavior. Successful exploitation may cause the ONVIF management service to crash, resulting in DoS condition that impacts normal device operation.
-
CVE-2026-6240 6.8 Moyenne
TP-Link Systems Inc. Tapo C520WS v2
A stack-based buffer overflow vulnerability exists in Tapo C520WS v2 in the ONVIF DeleteUsers service, due to insufficient boundary checks when handling multiple user deletion parameters. An authenticated attacker can send a crafted malicious request containing an excessive number of identifiers to overflow stack memory. Successful exploitation may result in a service crash or deadlock, leading to DoS affecting device management and monitoring functionality.
-
CVE-2026-6239 6.8 Moyenne
TP-Link Systems Inc. Tapo C520WS v2
A stack‑based buffer overflow vulnerability exists in Tapo C520WS v2 in the ONVIF CreateUsers service, where the device fails to properly validate the number of XML user nodes during request processing. An authenticated attacker can send a specially crafted ONVIF request containing an excessive number of user entries to trigger memory corruption. Successful exploitation may cause the ONVIF management service to terminate unexpectedly, resulting in a denial‑of‑service (DoS) condition that disrupts device configuration and management functions.
-
CVE-2026-34123 7.0 Élevée
TP-Link Systems Inc. Tapo C520WS v2
On Tapo C520WS v2, restricted accounts (for example, hub users) are intended to execute only a limited set of low‑sensitivity operations. Due to a logic flaw in the device’s API authorization mechanism, an attacker can craft requests that leverage legitimate “method mapping” behavior to bypass whitelist restrictions, allowing restricted operations to be masked as permitted requests and executed. Successful exploitation may allow an attacker (with access to a restricted account) to execute unauthorized sensitive operations. Depending on the operation invoked, impact could include device resets, unintended configuration changes, or disruption of normal operation, leading to loss of availability and integrity of the device.
-
CVE-2026-10038 4.3 Moyenne
smub Charitable – Donation Plugin for WordPress – Fundraising with Recurring Donations & More
The Charitable – Donation Plugin for WordPress – Fundraising with Recurring Donations & More plugin for WordPress is vulnerable to Insecure Direct Object Reference / Authorization Bypass leading to Arbitrary Attachment Deletion in versions up to, and including, 1.8.11.1 via the profile avatar update flow. This is due to the save_avatar() function in Charitable_Profile_Form calling wp_delete_attachment() on an attachment ID read from the user's 'avatar' meta without validating that the attachment is owned by the user, combined with Charitable_Data_Processor::process_picture() returning the raw posted value when no file is uploaded, allowing the 'avatar' user meta to be poisoned with any attacker-chosen attachment ID. This makes it possible for authenticated attackers, with Subscriber-level access and above, to delete arbitrary attachments from the Media Library by performing a two-request chain (first poisoning the stored avatar meta value with a target attachment ID, then triggering deletion via a normal avatar upload).
-
CVE-2025-12656 3.8 Faible
wpvividplugins WPvivid — Backup, Migration & Staging
The Migration, Backup, Staging – WPvivid Backup & Migration plugin for WordPress is vulnerable to arbitrary directory deletion due to insufficient file path validation in the delete_cancel_staging_site() function in all versions up to, and including, 0.9.128. This makes it possible for authenticated attackers, with Administrator-level access and above, to delete arbitrary folders on the server, which leads to a loss of data.
-
CVE-2026-7654 8.8 Élevée
codepress Admin Columns
The Admin Columns plugin for WordPress is vulnerable to PHP Object Injection leading to Remote Code Execution in versions up to and including 7.0.18. This is due to the use of `unserialize()` without an `allowed_classes` restriction in the `IdsToCollection::get_ids_from_string()` function, which processes attacker-controlled post meta values without proper validation. This makes it possible for authenticated attackers with Contributor-level access and above to inject a serialized PHP object into a post's custom meta field and trigger arbitrary code execution by exploiting a bundled POP gadget chain, resulting in remote code execution as the web server user.
-
CVE-2026-7523 4.3 Moyenne
alejo30 Alba Board
The Alba Board plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 2.1.3. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to access arbitrary private alba_card post data, including title, description, assignee, due date, tags, and comments, that is intended to be restricted to Administrators and Editors. The handler is registered via the wp_ajax_nopriv_ hook and its nonce is exposed to all site visitors through wp_localize_script on pages containing the [alba_board] shortcode, making this exploitable by unauthenticated users who can access any such page.
-
CVE-2026-45409 5.3 Moyenne
kjd idna · Kjd internationalized domain names in applications
Internationalized Domain Names in Applications (IDNA) for Python provides support for Internationalized Domain Names in Applications (IDNA) and Unicode IDNA Compatibility Processing. In versions prior to 3.15, payloads such as `"\u0660" * N` or `"\u30fb" * N + "\u6f22"` utilize the `valid_contexto` function prior to length rejection, and for high values of `N` will take a long time to process. This is the same issue as CVE-2024-3651, however the original remediation in 2024 was not a complete fix. A specially crafted argument to the `idna.encode()` function could consume significant resources. This may lead to a denial-of-service. Starting in version 3.14, the function rejects long inputs as soon as practicable prior to any further processing to minimize resource consumption. In version 3.15, this approach was extended to lesser used alternate functions (i.e. per-label conversions and codec support). A workaround is available. Domain names cannot exceed 253 characters in length. If this length limit is enforced prior to passing the domain to the `idna.encode()` function, it should no longer consume significant resources. This is triggered by arbitrarily large inputs that would not occur in normal usage, but may be passed to the library assuming there is no preliminary input validation by the higher-level application.
-
CVE-2026-11431 8.3 Élevée
Altium Enterprise Server · Altium 365
A path traversal vulnerability exists in the Projects Service download endpoint shared by Altium Enterprise Server and Altium 365. An authenticated user can supply a crafted path parameter that bypasses validation, allowing arbitrary files (including entire directories returned as archives) to be read from the server filesystem. Because the readable files include service configuration and credential material, exploitation can be used to gather information enabling further compromise. The issue can be combined with CVE-2026-11424 to reach the cloud-side endpoint. On multi-tenant Altium 365 deployments, the readable configuration could have exposed credentials shared across services. Altium Enterprise Server is fixed in 8.1.1; the issue has been remediated in Altium 365 at the service level.
-
CVE-2026-11429 10.0 Critique
Altium Enterprise Server · Altium 365
Two endpoints in the Vault Service ScriptsController, shared by Altium Enterprise Server and Altium 365, accept file uploads where a user-supplied filename component is used to construct the destination path without validation, allowing arbitrary files to be written to any location writable by the service account. Because the file write operation completes before authentication is validated, the vulnerability can be exploited without any credentials, session, or prior knowledge of the system. An unauthenticated network attacker can use this primitive to place executable content in directories where it is later executed by the service, resulting in remote code execution under the Vault Service account. Altium Enterprise Server is fixed in 8.1.1; the issue has been remediated in Altium 365 (commercial and government cloud) at the service level.
-
CVE-2026-11424 8.3 Élevée
Altium Enterprise Server · Altium 365
A server-side request forgery (SSRF) vulnerability exists in a GraphQL service component shared by Altium Enterprise Server and Altium 365. An authenticated user can submit a request whose input is treated as a URL by the server and used to issue an outbound HTTP GET request without URL validation or destination filtering. The response body is then returned to the user. This allows an authenticated attacker to reach internal services and metadata endpoints that would not otherwise be accessible from the public network, and to retrieve their contents. The impact is information disclosure and internal infrastructure reconnaissance; the request primitive is limited to HTTP GET with no custom headers. Altium Enterprise Server is fixed in 8.1.1; the issue has been remediated in Altium 365 at the service level.
-
CVE-2026-11416 8.1 Élevée
jxxghp MoviePilot
MoviePilot contains a path traversal vulnerability in the AliPan, U115, and Rclone cloud storage download handlers where the local destination path is constructed by concatenating the configured download directory with a filename taken directly from remote cloud API metadata without basename normalization or path validation. An attacker who controls a filename returned by a remote cloud storage API can include traversal sequences ../ in the filename to cause downloaded content to be written outside the configured download directory, potentially overwriting arbitrary files including configuration or plugin files reachable by the application process.
-
CVE-2026-36785 7.5 Élevée
Shenzhen Tenda Technology Co., Ltd Tenda FH451 V1.0.0.9 was discovered to contain a stack overflow in the page parameter of the fromDhcpListClient function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.
-
CVE-2026-11423 9.4 Critique
Altium Enterprise Server
A path traversal vulnerability exists in the Altium Enterprise Server Collaboration Service due to improper handling of user-supplied filenames in the MCAD and Simulation file download flows. A regular authenticated user can submit a collaboration message containing a crafted filename, which is later used to construct the download path on the server without validation, allowing arbitrary files to be read from the server filesystem. Because the readable files include the server's master configuration, which stores credentials for privileged accounts, exploitation can lead to authenticating as a system administrator and gaining full control of the server. Altium 365 cloud deployments are not affected.
-
CVE-2026-11422 7.1 Élevée
shd101wyy Markdown Preview Enhanced · shd101wyy crossnote
Markdown Preview Enhanced 0.8.x with crossnote engine 0.9.28 contains a code injection vulnerability in the WaveDrom rendering pipeline that allows attackers to execute arbitrary JavaScript by embedding malicious content in a wavedrom fenced code block within a crafted Markdown document. Attackers can exploit the unsanitized passing of wavedrom block content to window.eval() in the VS Code webview context to abuse the extension's message passing and invoke arbitrary file writes on the local filesystem.
-
CVE-2026-46493 7.5 Élevée
haxtheweb haxcms-php
HAX CMS helps manage microsite universe with PHP or NodeJs backends. Versions prior to 26.0.1 use `uniqid` for generating salts, which is unsuitable. Version 26.0.1 fixes the issue.
-
CVE-2026-46401 5.3 Moyenne
haxtheweb issues
HAX CMS helps manage microsite universe with PHP or NodeJs backends. Versions prior to 26.0.0 suffer from an improper session termination vulnerability where authentication tokens remain valid after user logout. This allows attackers who obtain valid tokens to maintain persistent access to authenticated CMS functionality, bypassing the intended session termination mechanism and enabling unauthorized access to CMS metadata and administrative functions. Version 26.0.0 fixes the issue.
-
CVE-2026-46400 8.7 Élevée
haxtheweb haxcms-php
HAX CMS helps manage microsite universe with PHP or NodeJs backends. Starting in version 11.0.6 and prior to version 25.0.0, the file upload functionality in HAXCMS PHP only validates file extensions using a regex pattern without checking the actual file content or MIME type. This allows attackers to upload malicious files (e.g., PHP webshells) disguised as legitimate image files, potentially leading to remote code execution. Version 25.0.0 contains a fix for the issue.
-
CVE-2026-46398 8.8 Élevée
haxtheweb haxcms-php
HAX CMS helps manage microsite universe with PHP or NodeJs backends. Starting in version 25.0.0 and prior to version 26.0.0, the haxcms_refresh_token cookie is set without the Secure flag. This allows it to be transmitted over unencrypted HTTP, making it vulnerable to theft via packet sniffing on the network. Version 26.0.0 fixes the issue.
-
CVE-2026-46397 6.5 Moyenne
haxtheweb haxcms-php · haxtheweb haxcms-nodejs
HAX CMS helps manage microsite universe with PHP or NodeJs backends. Prior to version 26.0.0, an Authenticated Local File Inclusion (LFI) vulnerability in the HAXCMS saveOutline endpoint allows a low-privileged user to read arbitrary files on the server by manipulating the location field written into site.json. This enables attackers to exfiltrate sensitive system files such as /etc/passwd, application secrets, or configuration files accessible to the web server (www-data). Version 26.0.0 patches the issue.
-
CVE-2026-46357 6.5 Moyenne
haxtheweb haxcms-nodejs
HAX CMS helps manage microsite universe with PHP or NodeJs backends. Prior to version 26.0.0, the HAX CMS NodeJS application crashes when an authenticated attacker sends a specially crafted site creation request to the createSite endpoint. A single request is sufficient to take the entire application offline, requiring a manual server restart to restore service. Version 26.0.0 fixes the issue.
-
CVE-2026-45779 9.8 Critique
ubccr xdmod · Buffalo open xdmod
OpenXDMoD is an open framework for collecting and analyzing HPC metrics. An SQL injection vulnerability exists in Open XDMoD versions prior to 10.0.3 that allows an unauthenticated remote attacker to execute arbitrary SQL statements. Exploitation requires no authentication or user interaction and can result in complete compromise of the underlying database. All deployments of Open XDMoD prior to 10.0.3 are impacted. This issue was discovered on 2023-08-03 and patched on 2023-08-04. At this time there is no evidence that this vulnerability has been exploited in the wild. The vulnerability was patched in Open XDMoD 10.0.3 on 2023-08-04. As a workaround, apply the patch manually.
-
CVE-2026-45778 5.4 Moyenne
ubccr xdmod · Buffalo open xdmod
OpenXDMoD is an open framework for collecting and analyzing HPC metrics. Prior to version 11.0.3, an authenticated attacker can inject malicious JavaScript into their Open XDMoD user profile and abuse the password reset functionality to email a link to an HTML page, which when visited by the victim, reflects and executes the unsanitized payload in the victim's browser, potentially leading to credential capture and Open XDMoD account takeover. All deployments of Open XDMoD prior to 11.0.3 are impacted. This issue was reported privately on 2026-04-06, and at this time there is no evidence that this vulnerability has been exploited in the wild. The vulnerability was patched in Open XDMoD 11.0.3 on 2026-05-12. As a workaround, apply the patch manually.
-
CVE-2026-45777 9.8 Critique
ubccr xdmod · Buffalo open xdmod
OpenXDMoD is an open framework for collecting and analyzing HPC metrics. Starting in version 9.5.0 and prior to version 11.0.3, an attacker can remotely execute arbitrary system commands on the web server hosting Open XDMoD with the privileges of the web server process. This could allow an attacker to read or modify application data, alter system configuration, or disrupt service availability. All deployments of Open XDMoD versions 9.5.0 through 11.0.2 (inclusive) are impacted. This issue was reported privately on 2026-04-06, and at this time there is no evidence that this vulnerability has been exploited in the wild. The vulnerability was patched in Open XDMoD 11.0.3 on 2026-05-12. As a workaround, apply the patch manually.
-
CVE-2026-45776 4.3 Moyenne
ubccr xdmod · Buffalo open xdmod
OpenXDMoD is an open framework for collecting and analyzing HPC metrics. Prior to version 11.0.3, a flaw in Open XDMoD's access control logic allows an attacker to submit a crafted HTTPS POST request that sets a session variable used for authorization decisions. If an installation of Open XDMoD includes the optional Job Performance (SUPReMM) module, an attacker could bypass intended data access restrictions and view other users' compute job efficiency metrics. All deployments of Open XDMoD prior to version 11.0.3 that contain the optional Job Performance (SUPReMM) module are impacted. This issue was reported privately on 2026-04-06, and at this time there is no evidence that this vulnerability has been exploited in the wild. The vulnerability was patched in Open XDMoD 11.0.3 on 2026-05-12. As a workaround, apply the patch manually.
-
CVE-2026-45758 9.6 Critique
guardrails-ai guardrails · Guardrailsai guardrails ai
Guardrails AI is a Python framework that helps build AI applications. On May 11, 2026 at approximately 6:00 PM Pacific, an attacker published a malicious version of `guardrails-ai` (0.10.1) to PyPI. Aany user who installed `guardrails-ai==0.10.1` from PyPI on May 11, 2026 may be affected. Security researchers identified the malicious package within approximately 2 hours of publication, and PyPI quarantined the repository. Based on our telemetry, Guardrails AI maintainers have observed no requests to Guardrails AI infrastructure originating from the malicious 0.10.1 version, and a review of system and access logs has produced no evidence of user data exfiltration through their systems. Users should upgrade to version 0.10.2 or downgrade to version 0.10.0, both of which are unaffected. Those who installed version 0.10.1 should rotate any credentials accessible from their machine (GitHub PATs, cloud provider keys, package registry tokens, API keys) and audit their GitHub account for unauthorized workflows or repositories.
-
CVE-2026-45300 7.4 Élevée
AsyncHttpClient async-http-client · Asynchttpclient project async-http-client
The AsyncHttpClient (AHC) library allows Java applications to easily execute HTTP requests and asynchronously process HTTP responses. Versions on the 2.x branch prior to 2.15.0 and the 3.x branch prior to 3.0.10 leak `Cookie` headers to cross-origin redirect targets. When following a redirect to a different origin, the `propagatedHeaders()` method in `Redirect30xInterceptor.java` strips `Authorization` and `Proxy-Authorization` headers but does not strip the `Cookie` header, causing session cookies and other sensitive cookie values to be sent to attacker-controlled servers. Versions 2.15.0 and 3.0.10 patch the issue.
-
CVE-2026-25624 4.8 Moyenne
Arista Networks Arista Edge Threat Management - Arista Next Generation Firewall (NGFW) · Arista ng firewall
An administrative cross-site scripting (XSS) vulnerability exists in the web user interface dashboard layout of Arista Edge Threat Management - Arista Next Generation Firewall (NGFW). Unvalidated user-supplied variables are echoed back to administrative profiles, facilitating vector payload processing behavior controls.
-
CVE-2026-25623 6.0 Moyenne
Arista Networks Arista Edge Threat Management - Arista Next Generation Firewall (NGFW) · Arista ng firewall
An input validation command execution vulnerability exists in the browser management pipeline of Arista Edge Threat Management - Arista Next Generation Firewall (NGFW). Authenticated administrators can leverage this exposure to obtain underlying terminal script code processing execution permissions.
-
CVE-2026-25622 6.0 Moyenne
Arista Networks Arista Edge Threat Management - Arista Next Generation Firewall (NGFW) · Arista ng firewall
A Captive Portal Custom Handler command injection vulnerability exists in Arista Edge Threat Management - Arista Next Generation Firewall (NGFW). On affected platforms, an administrative account logged into the user interface can exploit this input handling behavior to execute arbitrary platform shell commands.
-
CVE-2026-25621 6.0 Moyenne
Arista Networks Arista Edge Threat Management - Arista Next Generation Firewall (NGFW) · Arista ng firewall
A Reports application infrastructure vulnerability exists in Arista Edge Threat Management - Arista Next Generation Firewall (NGFW) due to insecure input validation. This issue uniquely affects version 17.4.0; earlier software releases are not exposed.
-
CVE-2026-25620 6.0 Moyenne
Arista Networks Arista Edge Threat Management - Arista Next Generation Firewall (NGFW) · Arista ng firewall
An encrypted password command injection vulnerability exists in the Captive Portal application framework of Arista Edge Threat Management - Arista Next Generation Firewall (NGFW). This issue uniquely affects version 17.4.0; earlier software releases are not exposed.
-
CVE-2026-11420 9.8 Critique
Altium Enterprise Server · Altium on-prem enterprise server
Two path traversal vulnerabilities in the Network Installation Service (NIS) of Altium Enterprise Server allow an unauthenticated network attacker to write arbitrary files to any writable location on the server filesystem and to read package archive files from the server. No authentication, session, or credentials are required. Because content-controlled files can be written to web-accessible directories, or used to overwrite application binaries or configuration files, exploitation can be escalated to remote code execution in the context of the service account, and can disclose deployment package contents. Altium 365 cloud deployments are not affected, as the Network Installation Service is not part of the cloud offering.
-
CVE-2026-11419 8.8 Élevée
Altium Enterprise Server · Altium on-prem enterprise server
A path traversal vulnerability exists in the Altium Enterprise Server Vault Service UploadController due to improper validation of a user-controlled path component in image upload requests. An authenticated user can supply a crafted absolute path so that the configured storage root is discarded, allowing arbitrary files to be written to any location on the server filesystem writable by the service account. Because content-controlled files can be written to web-accessible directories, or used to overwrite application binaries or configuration files, this can be escalated to remote code execution, service takeover, or denial of service. Altium 365 cloud deployments are not affected, as the affected endpoint is not reachable and the cloud storage architecture mitigates the file-write primitive.
-
CVE-2026-11414 9.8 Critique
Altium Enterprise Server · Altium on-prem enterprise server
A hard-coded cryptographic key is used by Altium Enterprise Server to sign file download URLs in the Vault service. Because the key is identical across all installations, an unauthenticated network attacker who can reach the server can forge valid download signatures and retrieve files from the Vault storage area without any authentication, session, or credentials. A separate path traversal vulnerability in the same download endpoint allows the configured storage root to be escaped, enabling reads of arbitrary files on the server filesystem. Combined, these issues allow an unauthenticated attacker to obtain sensitive server configuration and key material, which can lead to full server compromise. The vulnerability can be chained with CVE-2026-9152 to enumerate and bulk-download stored content. Altium 365 cloud deployments are not impacted in practice, as file storage uses object storage rather than the local filesystem.
-
CVE-2026-11401 8.0 Élevée
AWS Advanced Go Wrapper
An untrusted search path issue in the GlobalDatabasePlugin in the AWS Advanced Go Wrapper for Amazon Aurora PostgreSQL will allow a remote authenticated low-privilege actor to escalate privileges to those of another Amazon RDS user, including rds_superuser, via a crafted function created by the actor that runs when that user connects to the cluster through the affected wrapper. To remediate this issue, users should upgrade to the AWS Advanced Go Wrapper release 2026-05-26
-
CVE-2026-11400 8.0 Élevée
AWS Advanced JDBC Wrapper
An untrusted search path issue in the GlobalDatabasePlugin in the AWS Advanced JDBC Wrapper for Amazon Aurora PostgreSQL will allow a remote authenticated low-privilege actor to escalate privileges to those of another Amazon RDS user, including rds_superuser, via a crafted function created by the actor that runs when that user connects to the cluster through an affected wrapper. To remediate this issue, users should upgrade to AWS Advanced JDBC Wrapper version 4.0.1.
-
CVE-2026-5415 8.8 Élevée
webfactory Advanced Google reCAPTCHA
The WP Captcha PRO (the premium version of the Advanced Google reCAPTCHA plugin, both have the same slug) plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 5.38. This is due to the ajax_run_tool() AJAX handler relying solely on a nonce check (check_ajax_referer) for security without performing any capability check, combined with the create_temporary_link tool allowing the generation of passwordless login links for arbitrary users, and the handle_temporary_links() function authenticating visitors via these links without any additional authorization validation. The required nonce is exposed to all authenticated backend users (including Subscribers) via wp_localize_script() on all non-settings admin pages when the plugin's welcome pointer has not been dismissed. This makes it possible for authenticated attackers, with Subscriber-level access and above, to bypass normal authentication and log in as any user, including Administrators, resulting in complete account takeover.
-
CVE-2026-5411 8.8 Élevée
webfactory Advanced Google reCAPTCHA
The WP Captcha PRO (the premium version of the Advanced Google reCAPTCHA plugin, both have the same slug) plugin for WordPress is vulnerable to arbitrary file upload in all versions up to, and including, 5.38. This is due to a capability check in the save_ajax() function of the licensing module, combined with unrestricted file extraction in sync_cloud_protection(). This makes it possible for authenticated attackers, with Subscriber-level access and above, to upload arbitrary files including PHP webshells to the server by injecting a malicious cloud_protection_url into the license meta, which the plugin then downloads and extracts without file type validation into a web-accessible uploads directory. This can be used for remote code execution. Note: The vulnerability can only be exploited with a remote URL if "allow_url_fopen" is enabled in the php.ini config.
-
CVE-2026-46511 8.7 Élevée
haxtheweb haxcms-nodejs · haxtheweb haxcms-php
HAX CMS helps manage microsite universe with PHP or NodeJs backends. Prior to version 26.0.0, an attack chain utilizing Stored XSS alongside dynamic token exposure in the `/system/api/connectionSettings` endpoint allows an authenticated attacker to perform a complete cross-tenant account takeover. The API dynamically leaks the active session's authentication tokens (including the `jwt`, `user_token`, `site_token`, and `appstore_token`) into a global JavaScript variable (`window.appSettings`). An attacker can exploit the XSS vulnerability to force a victim's browser to silently fetch their specific connection settings, extract the tokens, and exfiltrate them to an attacker-controlled webhook. Version 26.0.0 patches the issue.
-
CVE-2026-46496 9.3 Critique
haxtheweb haxcms-nodejs · haxtheweb video-player
HAX CMS helps manage microsite universe with PHP or NodeJs backends. A stored cross-site scripting (XSS) vulnerability exists in versions prior to 26.0.0 due to improper sanitization of the `<video-player>` component. The component allows `javascript:` URIs in the `source` attribute, which are executed when the page is viewed. This enables attackers to execute arbitrary JavaScript in the context of the victim’s browser and access sensitive data such as JWT tokens and more. Version 26.0.0 fixes the issue.
-
CVE-2026-46399 9.4 Critique
haxtheweb haxcms-nodejs · haxtheweb haxcms-php
HAX CMS helps manage microsite universe with PHP or NodeJs backends. The PHP version of HAX CMS prior to version 26.0.0 has an authenticated file overwrite vulnerability. An attacker can exploit this vulnerability to configure malicious Git filter commands and achieve code execution on the HAX CMS server. Version 26.0.0 patches the issue.
-
CVE-2026-46396 9.3 Critique
haxtheweb haxcms-nodejs · haxtheweb video-player · haxtheweb iframe-loader
HAX CMS helps manage microsite universe with PHP or NodeJs backends. A stored cross-site scripting (XSS) vulnerability exists in versions prior to 26.0.0 due to improper sanitization of `<iframe>` elements. The application allows `javascript:` URIs in the `src` attribute, which are executed when a malicious page is viewed. This enables attackers to execute arbitrary JavaScript in the context of the victim’s browser and access sensitive data exposed to client-side scripts. Version 26.0.0 fixes the issue.
-
CVE-2026-46395 9.3 Critique
haxtheweb haxcms-nodejs
HAX CMS helps manage microsite universe with PHP or NodeJs backends. Prior to version 26.0.0, the `hmacBase64()` function in the HAXcms Node.js backend contains two critical cryptographic implementation errors that together allow any unauthenticated attacker to extract the system’s private signing key and forge arbitrary admin-level JSON Web Tokens (JWTs) allowing them to get full admin access with a single HTTP request. First, the function passes the literal string "0" as the HMAC signing key instead of the key parameter, making every HAXcms instance compute identical HMACs for the same input. Then, after computing the HMAC, the function concatenates the real key parameter which is "this.privateKey + this.salt", the system’s master signing secret is directly onto the output. The combined buffer is base64-encoded and returned as the token. Every base64url token produced has the same structure: 32 bytes HMAC keyed with "0" and N bytes of `privateKey+salt`. An attacker base64-decodes any token, discards the first 32 bytes, and reads the private key directly. The `/system/api/connectionSettings` endpoint is unauthenticated and returns multiple tokens generated by this function. A single GET request to this endpoint exposes the private key. The PHP backend implements this function correctly with the actual key and returns only the hash. The PHP version produces 44-character tokens whereas the broken Node.js version produces 139+ character tokens. Version 26.0.0 fixes the issue.
-
CVE-2026-46394 7.7 Élevée
haxtheweb haxcms-php
HAX CMS helps manage microsite universe with PHP or NodeJs backends. Prior to version 26.0.0, an OS command injection vulnerability exists in the Git.php library of the HAXcms PHP backend. The application constructs shell command strings using unsanitized input and executes them via proc_open(). An attacker who can control parameters passed into Git operations can execute arbitrary OS commands with the privileges of the web server. Out of 17 functions that invoke shell commands only 1 function (`commit()`) correctly uses `escapeshellarg()`. When combined with another vulnerability that allows configuration manipulation, this issue can lead to full remote code execution and complete system compromise. Version 26.0.0 patches the issue.
-
CVE-2026-46393 7.1 Élevée
haxtheweb haxcms-nodejs · haxtheweb haxcms-php
HAX CMS helps manage microsite universe with PHP or NodeJs backends. An authenticated Server-Side Request Forgery (SSRF) vulnerability in versions prior to 26.0.0 allows authenticated users to fetch arbitrary internal or local resources and write the responses to a web-accessible directory, enabling arbitrary file read and internal network access. Version 26.0.0 contains a fix.
-
CVE-2026-46392 8.7 Élevée
haxtheweb haxcms-php
HAX CMS helps manage microsite universe with PHP or NodeJs backends. Prior to version 26.0.0 of HAX CMS PHP, the `saveFile` endpoint validates upload extensions case-insensitively and writes the filename to disk verbatim, but the `.htaccess` rule that forces `Content-Disposition: attachment` on HTML files is case-sensitive. An HTML file uploaded with an uppercase extension (`.HTML`, `.Html`, `.HTM`) is still served as `text/html` but the forced-download header never applies, so the browser renders it inline and executes any embedded JavaScript in the HAXcms origin. This bypasses the mitigation shipped for CVE-2026-22704. Version 26.0.0 contains a fix.
-
CVE-2026-46391 8.7 Élevée
haxtheweb @haxtheweb/open-apis
HAX CMS helps manage microsite universe with PHP or NodeJs backends. Starting in version 9.0.1 and prior to version 26.0.0 of @haxtheweb/open-apis, multiple functions conduct substring-only matching to validate hostnames to which basic authorization should be sent. An attacker can append the matched substrings to an attacker-controlled endpoint and capture authentication. Version 26.0.0 fixes the issue.
-
CVE-2026-46390 6.9 Moyenne
haxtheweb haxcms-php
HAX CMS helps manage microsite universe with PHP or NodeJs backends. Starting in version 2.0.0 and prior to version 26.0.0, the gitlist plugin is exposed to unauthenticated users, allowing unauthenticated browsing of git repositories and git history. Version 26.0.0 patches the issue.
-
CVE-2026-46389 9.8 Critique
defenseunicorns uds-identity-config · Defenseunicorns uds identity config
UDS Identity Config builds the Keycloak configuration image (realm, plugins, theme, truststore, JARs) consumed by UDS Core's Identity deployment. In versions 0.11.0 through 0.26.0, a logic error in the `client-kubernetes-secret` Keycloak client authenticator (shipped by `uds-identity-config` and consumed by UDS Core) causes the submitted `client_secret` to be overwritten with the mounted Kubernetes secret before comparison. An attacker who can reach the Keycloak token endpoint and knows a `client_id` using this authenticator can authenticate as that client with any `client_secret` value and obtain OAuth2 tokens scoped to the client's service account. In the case of the `uds-operator` client this token can be used to registry/modify other clients. Version 0.26.1 patches the issue.
-
CVE-2026-10580 9.8 Critique
hippooo Hippoo Mobile App for WooCommerce
The Hippoo Mobile App for WooCommerce plugin for WordPress is vulnerable to Authentication Bypass leading to Administrator Account Takeover in all versions up to and including 1.9.4. This is due to a logic conflation in HippooPermissions::get_user_permissions(), which returns the same null sentinel for both administrators and unauthenticated visitors — a value that HippooPermissions::has_role_access() unconditionally interprets as full administrator access — causing override_extension_permission_callback() to assign __return_true as the permission callback for every WordPress and WooCommerce REST route cloned under /wc-hippoo/v1/ext/ by HippooControllerWithAuth::re_register_external_routes(), while the block_unauthorized_access() pre-dispatch guard fails to block unauthenticated users for the same reason. This makes it possible for unauthenticated attackers to invoke any core REST endpoint without credentials — most critically, sending a POST request to /wc-hippoo/v1/ext/wp/v2/users/<id> with a {"password":"<new_password>"} body to reset the password of any WordPress user, including the site administrator, and gain full administrative control of the site.
-
CVE-2026-50733 8.8 Élevée
shd101wyy Markdown Preview Enhanced
Markdown Preview Enhanced before 0.8.28 parses WaveDrom diagrams by evaluating untrusted markdown content with eval(), allowing arbitrary JavaScript execution. The flaw affects every render path - the live preview (window.eval) and presentation mode plus HTML export (the bundled WaveDrom.ProcessAll()/eva() helpers) - and can also be triggered through a <script type="WaveDrom"> element injected via raw HTML in markdown. When a victim previews or exports a crafted markdown document, an attacker can execute arbitrary code, leading to arbitrary file write. Fixed in 0.8.28 by parsing with JSON5.parse() and sanitizing WaveDrom data scripts to inert strict JSON.
-
CVE-2026-49493 8.8 Élevée
shd101wyy Markdown Preview Enhanced
Markdown Preview Enhanced before 0.8.28 parses Bitfield fenced code blocks with interpretJS(), which evaluates the block content as code via vm.runInNewContext(), allowing arbitrary code execution. A crafted markdown document containing a malicious bitfield code block executes attacker-controlled code on the server side when the document is rendered or exported. Fixed in 0.8.28 by parsing bitfield register definitions with JSON5.parse(), since they are purely data.
-
CVE-2026-49492 8.8 Élevée
shd101wyy Markdown Preview Enhanced
Markdown Preview Enhanced before 0.8.28 opens external files and links from the preview through a shell and does not validate untrusted inputs taken from the markdown document - the diagram filename attribute, imported file paths, and the latex_engine code-chunk attribute. On Windows, a crafted markdown document can inject operating system commands that execute when the document is previewed. Fixed in 0.8.28 by passing these inputs as literal arguments instead of through a shell and validating them before use.
-
CVE-2026-45750 9.0 Critique
Termix-SSH Termix · Termix termix
Termix is a web-based server management platform with SSH terminal, tunneling, and file editing capabilities. Prior to version 2.3.2, the GET /ssh/file_manager/ssh/resolvePath endpoint in the Termix File Manager component unsafely processes the path parameter and embeds it into a shell command executed over the active SSH session. Because the user-controlled value is placed inside double quotes and only double quotes are escaped, shell command substitution syntax such as $(...) is still interpreted by the remote shell. Version 2.3.2 fixes the issue.
-
CVE-2026-45749 8.1 Élevée
Termix-SSH Termix · Termix termix
Termix is a web-based server management platform with SSH terminal, tunneling, and file editing capabilities. The `POST /users/totp/disable` and `POST /users/totp/backup-codes` endpoints in Termix prior to version 2.3.2 accept the account password as a sole authentication factor for MFA-critical operations. An attacker who obtains a user's password (phishing, credential stuffing, the passwordHash leak in GHSA-xxxx) can disable TOTP entirely or regenerate backup codes, without ever possessing the TOTP device or knowing a valid TOTP code. This renders two-factor authentication ineffective. Version 2.3.2 patches the issue.
-
CVE-2026-45748 9.8 Critique
Termix-SSH Termix · Termix termix
Termix is a web-based server management platform with SSH terminal, tunneling, and file editing capabilities. The `POST /ssh/tunnel/connect` endpoint in Termix prior to version 2.3.2 builds an SSH tunnel command by interpolating user-controlled host record fields (`endpointIP`, `endpointUsername`, `password`) directly into a shell command without escaping, allowing persistent OS command injection on the source SSH host. Version 2.3.2 patches the issue.
-
CVE-2026-45746 9.0 Critique
Termix-SSH Termix · Termix termix
Termix is a web-based server management platform with SSH terminal, tunneling, and file editing capabilities. Prior to version 2.3.2, the File Manager functionality in Termix contains a critical Broken Access Control vulnerability due to improper validation of the sessionId parameter. The backend trusts a client-controlled identifier without verifying that it belongs to the authenticated user. This allows an attacker to manipulate the value and access active File Manager sessions belonging to other users. Since these sessions are tied to SSH connections to remote VPS instances, exploitation allows unauthorized interaction with another user's remote filesystem. Because the File Manager exposes functionality such as file reading, writing, uploading, and execution, this vulnerability enables direct command execution on another user's VPS (RCE). Version 2.3.2 patches the issue.
-
CVE-2026-45745 8.0 Élevée
Termix-SSH Termix · Termix termix
Termix is a web-based server management platform with SSH terminal, tunneling, and file editing capabilities. Starting in version 1.7.0, Termix Desktop (Electron) disables TLS certificate validation, allowing a machine-in-the-middle attacker to intercept and modify HTTPS traffic to the configured Termix server. This can lead to credential theft and JWT/session theft during login and normal use. As of time of publication, no known patched versions are available.
-
CVE-2026-45744 9.9 Critique
Termix-SSH Termix · Termix termix
Termix is a web-based server management platform with SSH terminal, tunneling, and file editing capabilities. Prior to version 2.3.2, the GET /ssh/file_manager/ssh/resolvePath endpoint in Termix is vulnerable to OS command injection. The endpoint uses double-quote escaping for shell command construction, which does not prevent $(...) and backtick command substitution. Any authenticated user with an active File Manager SSH session can execute arbitrary commands on the connected remote host. Version 2.3.2 patches the issue.
-
CVE-2026-45743 8.1 Élevée
Termix-SSH Termix · Termix termix
Termix is a web-based server management platform with SSH terminal, tunneling, and file editing capabilities. 16 file-manager endpoints in Termix prior to version 2.3.2 do not verify that the requesting user owns the SSH session identified by `sessionId`. An authenticated attacker who knows or guesses another user's active `sessionId` can read, write, delete, download, and execute files on the victim's connected SSH host. Version 2.3.2 patches the issue.
-
CVE-2026-45327 8.2 Élevée
DatanoiseTV tinyice
TinyIce is a streaming server for audio and video. In versions 0.8.95 through 2.4.1, missing authentication on WebRTC ingest endpoint allows unauthenticated stream injection. Version 2.5.0 fixes the issue by requiring either HTTP Basic auth or a `?password=` query parameter, comparing the supplied password against the per-mount source password (or the `default_source_password` fallback) using bcrypt, hooking into the existing brute-force IP rate-limiter (5 failed attempts per IP within 15 minutes triggers a lockout), and rejecting requests for mounts in `disabled_mounts`. The same release also tightens an adjacent endpoint, `POST /admin/golive/chunk`, which previously required session authentication but did not verify the session user's per-mount access nor check the CSRF token.
-
CVE-2026-45291 7.5 Élevée
CloudburstMC Network
Cloudburst Network provides network components used within Cloudburst projects. A vulnerability in versions prior to `1.0.0.CR3-20260418.124334-32` impacts publicly accessible software depending on the affected versions of Network and allows an attacker to exploit a bug in Network to close the parent netty channel, rendering it inoperable. All consumers of the library should upgrade to at least version `1.0.0.CR3-20260418.124334-32`. There are no known workarounds beyond updating the library.
-
CVE-2026-45290 7.5 Élevée
CloudburstMC Network
Cloudburst Network provides network components used within Cloudburst projects. A vulnerability in versions prior to `1.0.0.CR3-20260417.085727-30` impacts publicly accessible software depending on the affected versions of Network and allows an attacker to exploit a vulnerability in Network to stall the netty event loop, rendering it inoperable. All consumers of the library should upgrade to at least version `1.0.0.CR3-20260417.085727-30`. There are no known workarounds beyond updating the library.
-
CVE-2026-36501 7.5 Élevée
An issue in the Externalizable.readExternal() component of Controller v12.0.5 allows attackers to cause a Denial of Service (DoS) via a crafted input.
-
CVE-2026-36500 9.1 Critique
An issue in the cluster-admin:backup-datastore component of Controller v12.0.5 allows attackers to execute a directory traversal via a crafted request.
-
CVE-2026-2379 5.9 Moyenne
Arista Networks EOS
On affected platforms with hardware IPSec support running Arista EOS with certain IPsec features enabled, EOS may exhibit unexpected behavior in specific cases. Physical interface flaps and certain agent restarts can cause IPsec tunnel re-establishment with existing Security Associations, resulting in sequence number mismatches between tunnel endpoints potentially causing unstable communication.
-
CVE-2026-11344 7.3 Élevée
code-projects Vehicle Management System
A vulnerability was found in code-projects Vehicle Management System 1.0. This impacts an unknown function of the file newdriver.php of the component New Driver Registration Form. Performing a manipulation of the argument photo results in unrestricted upload. The attack may be initiated remotely. The exploit has been made public and could be used.
-
CVE-2026-11342 7.3 Élevée
code-projects Hotel and Tourism Reservation System
A vulnerability has been found in code-projects Hotel and Tourism Reservation System 1.0. This affects an unknown function of the file /details.php. Such manipulation of the argument room leads to sql injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.
-
CVE-2026-11341 6.3 Moyenne
D-Link DWR-M920
A flaw has been found in D-Link DWR-M920 up to 1.1.50. The impacted element is the function sub_412DA0 of the file /boafrm/formIMEISetup. This manipulation of the argument IMEI_value causes os command injection. The attack can be initiated remotely. The exploit has been published and may be used.
-
CVE-2025-71318 9.8 Critique
Riello UPS NetMan 204
NetMan 204 fails to enforce authentication on its administrative pages and command endpoints. A remote, unauthenticated attacker can directly request administrative pages (such as administration.html, administration-commands.html, and configuration.html) to disclose sensitive information including LDAP configuration and active user details, and can invoke privileged UPS control commands — including shutdown, reboot, switch-on-bypass, and battery test — without supplying any credentials.
-
CVE-2025-71317 9.8 Critique
Riello UPS NetMan 204
NetMan 204 contains a hard-coded backdoor account with the username and password 'eurek' that grants administrative access. A remote, unauthenticated attacker can authenticate through the cgi-bin/login.cgi endpoint (for example /cgi-bin/login.cgi?username=eurek&password=eurek, which due to lax parameter validation can be shortened to /cgi-bin/login.cgi?username=eurek%20eurek) to obtain administrator privileges, allowing them to alter device configuration, enable the telnet/SSH services, and reset local user credentials.
-
CVE-2026-8714 6.5 Moyenne
TP-Link Systems Inc. Tapo C520WS v2 · Tp-link tapo c520ws firmware
A denial-of-service vulnerability exists in the RTSP server component of TP-Link Tapo C520WS v2 due to improper handling of syntactically invalid input. Crafted inputs can trigger a processing error, causing the RTSP service to enter non-responsive state. Successful exploitation may cause the RTSP in a denial-of-service condition.
-
Arista Networks EOS · Arista eos
On affected platforms running Arista EOS where a tunnel decapsulation configuration—such as VXLAN (Virtual Extensible LAN), decap-groups, or a GRE (Generic Routing Encapsulation) tunnel interface—is present, the switch will incorrectly decapsulate and forward other unexpected tunneled packet with a destination IP matching its configured decapsulation IP. This occurs because the switch does not verify the tunnel protocol type, potentially leading to the unexpected processing of non-configured tunnel traffic. This issue has been reported as being exploited in the wild.
-
CVE-2026-48112 6.5 Moyenne
mcmilk 7-Zip · 7-zip 7-zip
7-Zip is a file archiver with a high compression ratio. Versions 9.18 through 26.00 contain a heap out-of-bounds read in 7-Zip Ar handler BSD SYMDEF parser. A 4-byte heap out-of-bounds read exists in the Unix ar archive parser in 7-Zip. When parsing a BSD-style __.SYMDEF symbol table, the ParseLibSymbols function reads a 32-bit namesSize field via Get32 at a position that can equal the buffer size, reading 4 bytes past the end of the heap allocation. This reads uninitialized heap data under the default allocator. Version 26.01 patches the issue.
-
CVE-2026-48111 7.1 Élevée
mcmilk 7-Zip · 7-zip 7-zip
7-Zip is a file archiver with a high compression ratio. Versions 9.21 through 26.00 contain an off-by-one out-of-bounds read vulnerability in the ParseDepedencyExpression function of the UEFI firmware image parser(CPP/7zip/Archive/UefiHandler.cpp). The function validates an attacker-controlled opcode byte using > instead of >= against the element count of the 10-entry kExpressionCommands static array, allowing an opcode value of 10 to read one pointer slot (8 bytes on x64) past the end of the array in .rodata. The out-of-bounds value is then dereferenced as a const char * and passed through strlen and memcpy into the archive's Characts property, which may cause either a denial of service (access violation when the adjacent bytes do not form a valid readable pointer) or a minor information disclosure of an adjacent .rdata string literal into archive metadata. The vulnerability is reached automatically during IInArchive::Open() via the call path OpenFv/OpenCapsule → ParseVolume → ParseSections when processing a SECTION_DXE_DEPEX (0x13) or SECTION_PEI_DEPEX (0x1B) section whose first body byte is 0x0A, and the UEFI handler is enabled by default in stock 7z.dll with signature-based detection for both UEFIc and UEFIf formats. The outcome (crash vs. silent leak) is deterministic per build but linker-layout dependent, with no write primitive and no disclosure of heap data, secrets, or ASLR base addresses. Version 26.01 fixes the issue.
-
CVE-2026-48104 4.2 Moyenne
mcmilk 7-Zip · 7-zip 7-zip
7-Zip is a file archiver with a high compression ratio. Versions 9.18 through 26.00 contain an uninitialized heap read in the SquashFS archive handler caused by a sparsely populated index array. In the SquashFS handler, _blockToNode is allocated with capacity for every metadata block but populated only when an inode crosses a block boundary, so a crafted image with few inodes spanning many blocks leaves most slots holding raw heap contents (the underlying allocator does not zero-initialize POD storage). When OpenDir looks up an attacker-influenced blockIndex (derived from the RootInode superblock field), it reads two of these uninitialized slots and passes them as the left/right bounds of a binary search over _nodesPos, which dereferences the midpoint without bounds checking; if the resulting value happens to match the search key, the returned index is used to read a full node struct from _nodes whose fields feed further directory parsing, forming a chained OOB read primitive that is heap-layout-dependent and not reliably triggerable. The SquashFS handler is enabled by default in stock 7z.dll and the issue triggers during Open() with no interaction beyond opening the file; impact is denial of service from wild-pointer dereference and potential heap information disclosure, with no write primitive. Version 26.01 fixes the issue.
-
CVE-2026-48103 7.1 Élevée
mcmilk 7-Zip · 7-zip 7-zip
7-Zip is a file archiver with a high compression ratio. Versions 9.34 through 26.00 contain an off-by-one heap out-of-bounds read in the WIM (Windows Imaging) archive handler's security descriptor lookup. In CHandler::GetSecurity (CPP/7zip/Archive/Wim/WimHandler.cpp), the per-image SecurOffsets table holds numEntries + 1 cumulative offsets, but the check securityId >= SecurOffsets.Size() admits securityId == numEntries, and the function then reads SecurOffsets[securityId + 1], fetching one UInt32 past the end of the heap-allocated CRecordVector (which performs no bounds checking on operator[]). The securityId is attacker-controlled at offset +0xC of any directory entry in WIM metadata, and the handler is registered for .wim, .swm, .esd, and .ppkg and enabled by default in stock 7z.dll; the OOB triggers zero-click in the GUI because 7zFM.exe's ListView calls GetRawProp(kpidNtSecure) for every item during listing (ASan-confirmed), and is also reachable via CLI listing with 7zz l -slt. Impact is limited to denial of service under hardened allocators and minor information disclosure, since the OOB value is only consumed arithmetically as a length and is not surfaced to the attacker; there is no write primitive.
-
CVE-2026-11339 8.8 Élevée
D-Link DWR-M920 · Dlink dwr-m920 firmware
A vulnerability was detected in D-Link DWR-M920 up to 1.1.50. The affected element is the function sub_41CF20 of the file /boafrm/formUSSDSetup. The manipulation of the argument ussdValue results in command injection. It is possible to launch the attack remotely. The exploit is now public and may be used.
-
CVE-2026-11338 2.4 Faible
SourceCodester Ship Ferry Ticket Reservation System
A security vulnerability has been detected in SourceCodester Ship Ferry Ticket Reservation System 1.0. Impacted is an unknown function of the file /admin/?page=user/manage_user. The manipulation of the argument Username leads to cross site scripting. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used.
-
CVE-2026-11337 4.3 Moyenne
tittuvarghese CollegeManagementSystem
A vulnerability was found in tittuvarghese CollegeManagementSystem 3e476335cfbfb9a049e09f474c7ec885f69a9df3/a38852979f7e27ae67b610dce5979500ef8ebe01. Affected by this vulnerability is an unknown functionality of the file /dashboard_page/forms/fetch.php. The manipulation of the argument department_name results in cross site scripting. The attack may be launched remotely. The exploit has been made public and could be used. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. The project was informed of the problem early through an issue report but has not responded yet.
-
CVE-2025-5090 6.5 Moyenne
Arista Networks EOS / CloudVision eXchange (CVX)
CVX is not resilient to unexpected messages from a connected switch. This leads to agent crashes on CVX causing instability in the CVX cluster. An attacker could use this behavior to create a denial of service (DoS) scenario. Note that this would require the attacker to have a high privilege access to the connected switch to be able to send custom TCP packets to the CVX.
-
CVE-2025-5089 6.5 Moyenne
Arista Networks EOS / CloudVision eXchange (CVX)
In a CVX cluster, an EOS switch connected to a CVX server is not resilient to certain malformed messages received from the connected CVX server. Similarly, the CVX server is not resilient to certain malformed messages received from the connected EOS switch. This leads to either a Sysdb agent crash on the EOS device causing a soft reset of the switch or agent crashes on the CVX server causing instability of the CVX cluster. An attacker could use this behavior to create a denial of service (DoS) scenario. Note that this would require the attacker to already have a high privilege access to the connected device to be able to send custom TCP packets. EOS switches that are not connected to a CVX server are not impacted.
-
CVE-2025-5088 8.3 Élevée
Arista Networks EOS / CloudVision eXchange (CVX)
An authenticated Redis session could be used to obtain full root access to all servers in the CVX cluster. Note that this would require an attacker to have both network access to the Redis service on a CVX server and the Redis password. Please note that all Redis communication, including authentication, occurs over plaintext in the present day. TLS support is tracked under RFE1294850.
-
CVE-2026-9270 9.1 Critique
BINARY DataDog::DogStatsd · Binary datadog\
DataDog::DogStatsd versions through 0.07 for Perl allow metric injections. DataDog::DogStatsd does not properly sanitise input, allowing metric injections of data from untrusted sources. The send_stats method does not remove newlines from metric names ($stat variable), allowing attackers to change the metric name prefix. The send_stats method does not validate the content of the value ($delta variable), allowing attackers to inject metrics, especially from methods that do not restrict the data type for the value, such as set, gauge, count and histogram. The send_stats method does not validate the content of the tags, which may contain newlines, pipes and colons that allow metric injections. Note that the SYNOPSIS shows an example of passing a website form "loginName" parameter as a tag, which is unsafe.
-
CVE-2026-48102 4.3 Moyenne
mcmilk 7-Zip · 7-zip 7-zip
7-Zip is a file archiver with a high compression ratio. Versions 9.11 through 26.00 contain a heap out-of-bounds read of up to 3 bytes in the UDF disc image handler's File Identifier Descriptor parser. In CFileId::Parse (CPP/7zip/Archive/Udf/UdfIn.cpp), after validating size < 38 + idLen + impLen and advancing processed to 38 + impLen + idLen, the alignment-padding loop reads p[processed] while incrementing up to 3 times to reach a 4-byte boundary, and the processed <= size bounds check only runs after the loop. When (38 + impLen + idLen) % 4 != 0 and 38 + impLen + idLen == size, the loop reads 1 to 3 bytes past the end of the exact-size heap buffer allocated via buf.Alloc((size_t)item.Size). The UDF handler is registered for .iso and .udf files and auto-detected by signature, and the OOB read triggers during Open() when listing or extracting a crafted UDF image. Impact is limited to information disclosure (a 1-bit oracle per OOB byte via open/fail behavior) and denial of service (crash under hardened allocators); there is no write primitive. Version 26.01 fixes the issue.